diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 1330 |
1 files changed, 0 insertions, 1330 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi deleted file mode 100644 index b7e514f81f92..000000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ /dev/null @@ -1,1330 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Cheza device tree source (common between revisions) - * - * Copyright 2018 Google LLC. - */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sdm845.dtsi" - -/* PMICs depend on spmi_bus label and so must come after SoC */ -#include "pm8005.dtsi" -#include "pm8998.dtsi" - -/ { - aliases { - bluetooth0 = &bluetooth; - serial1 = &uart6; - serial0 = &uart9; - wifi0 = &wifi; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&cros_ec_pwm 0>; - enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; - power-supply = <&ppvar_sys>; - pinctrl-names = "default"; - pinctrl-0 = <&ap_edp_bklten>; - }; - - /* FIXED REGULATORS - parents above children */ - - /* This is the top level supply and variable voltage */ - ppvar_sys: ppvar-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "ppvar_sys"; - regulator-always-on; - regulator-boot-on; - }; - - /* This divides ppvar_sys by 2, so voltage is variable */ - src_vph_pwr: src-vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vph_pwr"; - - /* EC turns on with switchcap_on_l; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&ppvar_sys>; - }; - - pp5000_a: pp5000-a-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp5000_a"; - - /* EC turns on with en_pp5000_a; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&ppvar_sys>; - }; - - src_vreg_bob: src-vreg-bob-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vreg_bob"; - - /* EC turns on with vbob_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_dx_edp: pp3300-dx-edp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_dx_edp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_dx_edp>; - }; - - /* - * Apparently RPMh does not provide support for PM8998 S4 because it - * is always-on; model it as a fixed regulator. - */ - src_pp1800_s4a: pm8998-smps4 { - compatible = "regulator-fixed"; - regulator-name = "src_pp1800_s4a"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&src_vph_pwr>; - }; - - /* BOARD-SPECIFIC TOP LEVEL NODES */ - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pen_eject_odl>; - - switch-pen-insert { - label = "Pen Insert"; - /* Insert = low, eject = high */ - gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; - linux,code = <SW_PEN_INSERTED>; - linux,input-type = <EV_SW>; - wakeup-source; - }; - }; - - panel: panel { - compatible = "innolux,p120zdg-bf1"; - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - no-hpd; - - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; -}; - -&cpufreq_hw { - /delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */ -}; - -&psci { - /delete-node/ power-domain-cpu0; - /delete-node/ power-domain-cpu1; - /delete-node/ power-domain-cpu2; - /delete-node/ power-domain-cpu3; - /delete-node/ power-domain-cpu4; - /delete-node/ power-domain-cpu5; - /delete-node/ power-domain-cpu6; - /delete-node/ power-domain-cpu7; - /delete-node/ power-domain-cluster; -}; - -&cpus { - /delete-node/ domain-idle-states; -}; - -&cpu_idle_states { - little_cpu_sleep_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - idle-state-name = "little-power-down"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <350>; - exit-latency-us = <461>; - min-residency-us = <1890>; - local-timer-stop; - }; - - little_cpu_sleep_1: cpu-sleep-0-1 { - compatible = "arm,idle-state"; - idle-state-name = "little-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <360>; - exit-latency-us = <531>; - min-residency-us = <3934>; - local-timer-stop; - }; - - big_cpu_sleep_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - idle-state-name = "big-power-down"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <264>; - exit-latency-us = <621>; - min-residency-us = <952>; - local-timer-stop; - }; - - big_cpu_sleep_1: cpu-sleep-1-1 { - compatible = "arm,idle-state"; - idle-state-name = "big-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <702>; - exit-latency-us = <1061>; - min-residency-us = <4488>; - local-timer-stop; - }; - - cluster_sleep_0: cluster-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "cluster-power-down"; - arm,psci-suspend-param = <0x400000F4>; - entry-latency-us = <3263>; - exit-latency-us = <6562>; - min-residency-us = <9987>; - local-timer-stop; - }; -}; - -&cpu0 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&little_cpu_sleep_0 - &little_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&cpu1 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&little_cpu_sleep_0 - &little_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&cpu2 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&little_cpu_sleep_0 - &little_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&cpu3 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&little_cpu_sleep_0 - &little_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&cpu4 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&big_cpu_sleep_0 - &big_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&cpu5 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&big_cpu_sleep_0 - &big_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&cpu6 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&big_cpu_sleep_0 - &big_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&cpu7 { - /delete-property/ power-domains; - /delete-property/ power-domain-names; - cpu-idle-states = <&big_cpu_sleep_0 - &big_cpu_sleep_1 - &cluster_sleep_0>; -}; - -&lmh_cluster0 { - status = "disabled"; -}; - -&lmh_cluster1 { - status = "disabled"; -}; - -/* - * Reserved memory changes - * - * Putting this all together (out of order with the rest of the file) to keep - * all modifications to the memory map (from sdm845.dtsi) in one place. - */ - -/* - * Our mpss_region is 8MB bigger than the default one and that conflicts - * with venus_mem and cdsp_mem. - * - * For venus_mem we'll delete and re-create at a different address. - * - * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but - * that also means we need to delete cdsp_pas. - */ -/delete-node/ &venus_mem; -/delete-node/ &cdsp_mem; -/delete-node/ &cdsp_pas; -/delete-node/ &gpu_mem; - -/* Increase the size from 120 MB to 128 MB */ -&mpss_region { - reg = <0 0x8e000000 0 0x8000000>; -}; - -/* Increase the size from 2MB to 8MB */ -&rmtfs_mem { - reg = <0 0x88f00000 0 0x800000>; -}; - -/ { - reserved-memory { - venus_mem: memory@96000000 { - reg = <0 0x96000000 0 0x500000>; - no-map; - }; - }; -}; - -&qspi { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; - pinctrl-1 = <&qspi_sleep>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - - /* - * In theory chip supports up to 104 MHz and controller up - * to 80 MHz, but above 25 MHz wasn't reliable so we'll use - * that for now. b:117440651 - */ - spi-max-frequency = <25000000>; - spi-tx-bus-width = <2>; - spi-rx-bus-width = <2>; - }; -}; - - -&apps_rsc { - /delete-property/ power-domains; - - regulators-0 { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-s1-supply = <&src_vph_pwr>; - vdd-s2-supply = <&src_vph_pwr>; - vdd-s3-supply = <&src_vph_pwr>; - vdd-s4-supply = <&src_vph_pwr>; - vdd-s5-supply = <&src_vph_pwr>; - vdd-s6-supply = <&src_vph_pwr>; - vdd-s7-supply = <&src_vph_pwr>; - vdd-s8-supply = <&src_vph_pwr>; - vdd-s9-supply = <&src_vph_pwr>; - vdd-s10-supply = <&src_vph_pwr>; - vdd-s11-supply = <&src_vph_pwr>; - vdd-s12-supply = <&src_vph_pwr>; - vdd-s13-supply = <&src_vph_pwr>; - vdd-l1-l27-supply = <&src_pp1025_s7a>; - vdd-l2-l8-l17-supply = <&src_pp1350_s3a>; - vdd-l3-l11-supply = <&src_pp1025_s7a>; - vdd-l4-l5-supply = <&src_pp1025_s7a>; - vdd-l6-supply = <&src_vph_pwr>; - vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>; - vdd-l9-supply = <&src_pp2040_s5a>; - vdd-l10-l23-l25-supply = <&src_vreg_bob>; - vdd-l13-l19-l21-supply = <&src_vreg_bob>; - vdd-l16-l28-supply = <&src_vreg_bob>; - vdd-l18-l22-supply = <&src_vreg_bob>; - vdd-l20-l24-supply = <&src_vreg_bob>; - vdd-l26-supply = <&src_pp1350_s3a>; - vin-lvs-1-2-supply = <&src_pp1800_s4a>; - - src_pp1125_s2a: smps2 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - src_pp1350_s3a: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - src_pp2040_s5a: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - src_pp1025_s7a: smps7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - - vdd_qusb_hs0: - vdda_hp_pcie_core: - vdda_mipi_csi0_0p9: - vdda_mipi_csi1_0p9: - vdda_mipi_csi2_0p9: - vdda_mipi_dsi0_pll: - vdda_mipi_dsi1_pll: - vdda_qlink_lv: - vdda_qlink_lv_ck: - vdda_qrefs_0p875: - vdda_pcie_core: - vdda_pll_cc_ebi01: - vdda_pll_cc_ebi23: - vdda_sp_sensor: - vdda_ufs1_core: - vdda_ufs2_core: - vdda_usb1_ss_core: - vdda_usb2_ss_core: - src_pp875_l1a: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vddpx_10: - src_pp1200_l2a: ldo2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - - /* TODO: why??? */ - regulator-always-on; - }; - - pp1000_l3a_sdr845: ldo3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdd_wcss_cx: - vdd_wcss_mx: - vdda_wcss_pll: - src_pp800_l5a: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vddpx_13: - src_pp1800_l6a: ldo6 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <1856000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l7a_wcn3990: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp1200_l8a: ldo8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1248000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_dx_pen: - src_pp1800_l9a: ldo9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp1800_l10a: ldo10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1000_l11a_sdr845: ldo11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1048000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdd_qfprom: - vdd_qfprom_sp: - vdda_apc1_cs_1p8: - vdda_gfx_cs_1p8: - vdda_qrefs_1p8: - vdda_qusb_hs0_1p8: - vddpx_11: - src_pp1800_l12a: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vddpx_2: - src_pp2950_l13a: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp1800_l14a: ldo14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp1800_l15a: ldo15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2700_l16a: ldo16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp1300_l17a: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2700_l18a: ldo18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - /* - * NOTE: this rail should have been called - * src_pp3300_l19a in the schematic - */ - src_pp3000_l19a: ldo19 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp2950_l20a: ldo20 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp2950_l21a: ldo21 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_hub: - src_pp3300_l22a: ldo22 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - /* - * HACK: Should add a usb hub node and driver - * to turn this on and off at suspend/resume time - */ - regulator-boot-on; - regulator-always-on; - }; - - pp3300_l23a_ch1_wcn3990: ldo23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdda_qusb_hs0_3p1: - src_pp3075_l24a: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_l25a_ch0_wcn3990: ldo25 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1200_hub: - vdda_hp_pcie_1p2: - vdda_hv_ebi0: - vdda_hv_ebi1: - vdda_hv_ebi2: - vdda_hv_ebi3: - vdda_mipi_csi_1p25: - vdda_mipi_dsi0_1p2: - vdda_mipi_dsi1_1p2: - vdda_pcie_1p2: - vdda_ufs1_1p2: - vdda_ufs2_1p2: - vdda_usb1_ss_1p2: - vdda_usb2_ss_1p2: - src_pp1200_l26a: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_dx_pen: - src_pp3300_l28a: ldo28 { - regulator-min-microvolt = <3304000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - src_pp1800_lvs1: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - src_pp1800_lvs2: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - - regulators-1 { - compatible = "qcom,pm8005-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-s1-supply = <&src_vph_pwr>; - vdd-s2-supply = <&src_vph_pwr>; - vdd-s3-supply = <&src_vph_pwr>; - vdd-s4-supply = <&src_vph_pwr>; - - src_pp600_s3c: smps3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <600000>; - }; - }; -}; - -edp_brij_i2c: &i2c3 { - status = "okay"; - clock-frequency = <400000>; - - sn65dsi86_bridge: bridge@2d { - compatible = "ti,sn65dsi86"; - reg = <0x2d>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_brij_en &edp_brij_irq>; - - interrupt-parent = <&tlmm>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; - - vpll-supply = <&src_pp1800_s4a>; - vccio-supply = <&src_pp1800_s4a>; - vcca-supply = <&src_pp1200_l2a>; - vcc-supply = <&src_pp1200_l2a>; - - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - clock-names = "refclk"; - - no-hpd; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sn65dsi86_in: endpoint { - remote-endpoint = <&mdss_dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - sn65dsi86_out: endpoint { - remote-endpoint = <&panel_in_edp>; - }; - }; - }; - }; -}; - -ap_pen_1v8: &i2c11 { - status = "okay"; - clock-frequency = <400000>; - - digitizer@9 { - compatible = "wacom,w9013", "hid-over-i2c"; - reg = <0x9>; - pinctrl-names = "default"; - pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; - - vdd-supply = <&pp3300_dx_pen>; - vddl-supply = <&pp1800_dx_pen>; - post-power-on-delay-ms = <100>; - - interrupt-parent = <&tlmm>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; - - hid-descr-addr = <0x1>; - }; -}; - -amp_i2c: &i2c12 { - status = "okay"; - clock-frequency = <400000>; -}; - -ap_ts_i2c: &i2c14 { - status = "okay"; - clock-frequency = <400000>; - - touchscreen@10 { - compatible = "elan,ekth3500"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l &ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <125 IRQ_TYPE_LEVEL_LOW>; - - vcc33-supply = <&src_pp3300_l28a>; - - reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; - }; -}; - -&gpu { - status = "okay"; -}; - -&ipa { - qcom,gsi-loader = "modem"; - status = "okay"; -}; - -&lpasscc { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&mdss_dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - -/* - * Cheza fw does not properly program the GPU aperture to allow the - * GPU to update the SMMU pagetables for context switches. Work - * around this by dropping the "qcom,adreno-smmu" compat string. - */ -&adreno_smmu { - compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; -}; - -&mss_pil { - status = "okay"; - - iommus = <&apps_smmu 0x781 0x0>, - <&apps_smmu 0x724 0x3>; -}; - -&pm8998_pwrkey { - status = "disabled"; -}; - -&qupv3_id_0 { - status = "okay"; - iommus = <&apps_smmu 0x0 0x3>; -}; - -&qupv3_id_1 { - status = "okay"; - iommus = <&apps_smmu 0x6c0 0x3>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>; - - vmmc-supply = <&src_pp2950_l21a>; - vqmmc-supply = <&vddpx_2>; - - cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; -}; - -&spi0 { - status = "okay"; -}; - -&spi5 { - status = "okay"; - - tpm@0 { - compatible = "google,cr50"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&h1_ap_int_odl>; - spi-max-frequency = <800000>; - interrupt-parent = <&tlmm>; - interrupts = <129 IRQ_TYPE_EDGE_RISING>; - }; -}; - -&spi10 { - status = "okay"; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupt-parent = <&tlmm>; - interrupts = <122 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ec_ap_int_l>; - spi-max-frequency = <3000000>; - wakeup-source; - - cros_ec_pwm: pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -#include <arm/cros-ec-keyboard.dtsi> -#include <arm/cros-ec-sbs.dtsi> - -&uart6 { - status = "okay"; - - pinctrl-0 = <&qup_uart6_4pin>; - - bluetooth: bluetooth { - compatible = "qcom,wcn3990-bt"; - vddio-supply = <&src_pp1800_s4a>; - vddxo-supply = <&pp1800_l7a_wcn3990>; - vddrf-supply = <&src_pp1300_l17a>; - vddch0-supply = <&pp3300_l25a_ch0_wcn3990>; - max-speed = <3200000>; - }; -}; - -&uart9 { - status = "okay"; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&src_pp2950_l20a>; - vcc-max-microamp = <600000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vdda_ufs1_core>; - vdda-pll-supply = <&vdda_ufs1_1p2>; -}; - -&usb_1 { - status = "okay"; - - /* We'll use this as USB 2.0 only */ - qcom,select-utmi-as-pipe-clk; -}; - -&usb_1_dwc3 { - /* - * The hardware design intends this port to be hooked up in peripheral - * mode, so we'll hardcode it here. Some details: - * - SDM845 expects only a single Type C connector so it has only one - * native Type C port but cheza has two Type C connectors. - * - The only source of DP is the single native Type C port. - * - On cheza we want to be able to hook DP up to _either_ of the - * two Type C connectors and want to be able to achieve 4 lanes of DP. - * - When you configure a Type C port for 4 lanes of DP you lose USB3. - * - In order to make everything work, the native Type C port is always - * configured as 4-lanes DP so it's always available. - * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then - * sent to the two Type C connectors. - * - The extra USB2 lines from the native Type C port are always - * setup as "peripheral" so that we can mux them over to one connector - * or the other if someone needs the connector configured as a gadget - * (but they only get USB2 speeds). - * - * All the hardware muxes would allow us to hook things up in different - * ways to some potential benefit for static configurations (you could - * achieve extra USB2 bandwidth by using two different ports for the - * two connectors or possibly even get USB3 peripheral mode), but in - * each case you end up forcing to disconnect/reconnect an in-use - * USB session in some cases depending on what you hotplug into the - * other connector. Thus hardcoding this as peripheral makes sense. - */ - dr_mode = "peripheral"; - - /* - * We always need the high speed pins as 4-lanes DP in case someone - * hotplugs a DP peripheral. Thus limit this port to a max of high - * speed. - */ - maximum-speed = "high-speed"; - - /* - * We don't need the usb3-phy since we run in highspeed mode always, so - * re-define these properties removing the superspeed USB PHY reference. - */ - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb1_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; - qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; - qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - /* We have this hooked up to a hub and we always use in host mode */ - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdd-supply = <&vdda_usb2_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; -}; - -&usb_2_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&src_pp800_l5a >; - vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>; - vdd-1.3-rfa-supply = <&src_pp1300_l17a>; - vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>; -}; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qspi_cs0 { - bias-disable; /* External pullup */ -}; - -&qspi_clk { - bias-disable; /* Rely on Cr50 internal pulldown */ -}; - -&qspi_data0 { - bias-disable; /* Rely on Cr50 internal pulldown */ -}; - -&qspi_data1 { - bias-pull-down; -}; - -&qup_i2c3_default { - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; -}; - -&qup_i2c11_default { - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; -}; - -&qup_i2c12_default { - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; -}; - -&qup_i2c14_default { - drive-strength = <2>; - - /* Has external pullup */ - bias-disable; -}; - -&qup_spi0_default { - drive-strength = <2>; - bias-disable; -}; - -&qup_spi5_default { - drive-strength = <2>; - bias-disable; -}; - -&qup_spi10_default { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart9_rx { - drive-strength = <2>; - bias-pull-up; -}; - -&qup_uart9_tx { - drive-strength = <2>; - bias-disable; -}; - -/* PINCTRL - board-specific pinctrl */ -&pm8005_gpios { - gpio-line-names = "", - "", - "SLB", - ""; -}; - -&pm8998_adc { - channel@4d { - reg = <ADC5_AMUX_THM1_100K_PU>; - label = "sdm_temp"; - }; - - channel@4e { - reg = <ADC5_AMUX_THM2_100K_PU>; - label = "quiet_temp"; - }; - - channel@4f { - reg = <ADC5_AMUX_THM3_100K_PU>; - label = "lte_temp_1"; - }; - - channel@50 { - reg = <ADC5_AMUX_THM4_100K_PU>; - label = "lte_temp_2"; - }; - - channel@51 { - reg = <ADC5_AMUX_THM5_100K_PU>; - label = "charger_temp"; - }; -}; - -&pm8998_gpios { - gpio-line-names = "", - "", - "SW_CTRL", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "CFG_OPT1", - "WCSS_PWR_REQ", - "", - "CFG_OPT2", - "SLB"; -}; - -&tlmm { - /* - * pinctrl settings for pins that have no real owners. - */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&bios_flash_wp_r_l>, - <&ap_suspend_l_deassert>; - - pinctrl-1 = <&bios_flash_wp_r_l>, - <&ap_suspend_l_assert>; - - /* - * Hogs prevent usermode from changing the value. A GPIO can be both - * here and in the pinctrl section. - */ - ap-suspend-l-hog { - gpio-hog; - gpios = <126 GPIO_ACTIVE_LOW>; - output-low; - }; - - ap_edp_bklten: ap-edp-bklten-state { - pins = "gpio37"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - bios_flash_wp_r_l: bios-flash-wp-r-l-state { - pins = "gpio128"; - function = "gpio"; - bias-disable; - }; - - ec_ap_int_l: ec-ap-int-l-state { - pins = "gpio122"; - function = "gpio"; - bias-pull-up; - }; - - edp_brij_en: edp-brij-en-state { - pins = "gpio102"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - edp_brij_irq: edp-brij-irq-state { - pins = "gpio10"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - en_pp3300_dx_edp: en-pp3300-dx-edp-state { - pins = "gpio43"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - h1_ap_int_odl: h1-ap-int-odl-state { - pins = "gpio129"; - function = "gpio"; - bias-pull-up; - }; - - pen_eject_odl: pen-eject-odl-state { - pins = "gpio119"; - function = "gpio"; - bias-pull-up; - }; - - pen_irq_l: pen-irq-l-state { - pins = "gpio24"; - function = "gpio"; - - /* Has external pullup */ - bias-disable; - }; - - pen_pdct_l: pen-pdct-l-state { - pins = "gpio63"; - function = "gpio"; - - /* Has external pullup */ - bias-disable; - }; - - pen_rst_l: pen-rst-l-state { - pins = "gpio23"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; - - qspi_sleep: qspi-sleep-state { - pins = "gpio90", "gpio91", "gpio92", "gpio95"; - - /* - * When we're not actively transferring we want pins as GPIOs - * with output disabled so that the quad SPI IP block stops - * driving them. We rely on the normal pulls configured in - * the active state and don't redefine them here. Also note - * that we don't need the reverse (output-enable) in the - * normal mode since the "output-enable" only matters for - * GPIO function. - */ - function = "gpio"; - output-disable; - }; - - sdc2_clk: sdc2-clk-state { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16. - */ - drive-strength = <16>; - }; - - sdc2_cmd: sdc2-cmd-state { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; - - sdc2_data: sdc2-data-state { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; - - sd_cd_odl: sd-cd-odl-state { - pins = "gpio44"; - function = "gpio"; - bias-pull-up; - }; - - ts_int_l: ts-int-l-state { - pins = "gpio125"; - function = "gpio"; - bias-pull-up; - }; - - ts_reset_l: ts-reset-l-state { - pins = "gpio118"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; - - ap_suspend_l_assert: ap-suspend-l-assert-state { - pins = "gpio126"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - output-low; - }; - - ap_suspend_l_deassert: ap-suspend-l-deassert-state { - pins = "gpio126"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - output-high; - }; -}; - -&venus { - status = "okay"; - - video-firmware { - iommus = <&apps_smmu 0x10b2 0x0>; - }; -}; |