diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 1549 |
1 files changed, 4 insertions, 1545 deletions
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index 8d2a9b7f4730..e5a839d45840 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -6,1227 +6,18 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - #include "x1e80100.dtsi" #include "x1e80100-pmics.dtsi" +#include "x1-hp-omnibook-x14.dtsi" / { - model = "HP Omnibook X 14"; + model = "HP Omnibook X 14-fe0"; compatible = "hp,omnibook-x14", "qcom,x1e80100"; chassis-type = "laptop"; - - aliases { - serial0 = &uart21; - serial1 = &uart14; - }; - - wcd938x: audio-codec { - compatible = "qcom,wcd9385-codec"; - - pinctrl-names = "default"; - pinctrl-0 = <&wcd_default>; - - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; - qcom,mbhc-headset-vthreshold-microvolt = <1700000>; - qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - qcom,rx-device = <&wcd_rx>; - qcom,tx-device = <&wcd_tx>; - - reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; - - vdd-buck-supply = <&vreg_l15b_1p8>; - vdd-rxtx-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l15b_1p8>; - vdd-mic-bias-supply = <&vreg_bob1>; - - #sound-dai-cells = <1>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pmk8550_pwm 0 5000000>; - - brightness-levels = <0 2048 4096 8192 16384 65535>; - num-interpolated-steps = <20>; - default-brightness-level = <80>; - - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - power-supply = <&vreg_edp_bl>; - - pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; - pinctrl-names = "default"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&hall_int_n_default>; - pinctrl-names = "default"; - - switch-lid { - gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_SW>; - linux,code = <SW_LID>; - wakeup-source; - wakeup-event-action = <EV_ACT_DEASSERTED>; - }; - }; - - pmic-glink { - compatible = "qcom,x1e80100-pmic-glink", - "qcom,sm8550-pmic-glink", - "qcom,pmic-glink"; - orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, - <&tlmm 123 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - /* Left-side port, closer to the screen */ - connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss0_hs_in: endpoint { - remote-endpoint = <&usb_1_ss0_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&retimer_ss0_ss_out>; - }; - }; - - port@2 { - reg = <2>; - - pmic_glink_ss0_con_sbu_in: endpoint { - remote-endpoint = <&retimer_ss0_con_sbu_out>; - }; - }; - }; - }; - - /* Left-side port, farther from the screen */ - connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss1_hs_in: endpoint { - remote-endpoint = <&usb_1_ss1_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; - }; - }; - - port@2 { - reg = <2>; - - pmic_glink_ss1_sbu: endpoint { - remote-endpoint = <&usb_1_ss1_sbu_mux>; - }; - }; - }; - }; - }; - - reserved-memory { - linux,cma { - compatible = "shared-dma-pool"; - size = <0x0 0x8000000>; - reusable; - linux,cma-default; - }; - }; - - sound: sound { - compatible = "qcom,x1e80100-sndcard"; - model = "X1E80100-HP-OMNIBOOK-X14"; - audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", - "SpkrRight IN", "WSA WSA_SPK2 OUT", - "IN1_HPHL", "HPHL_OUT", - "IN2_HPHR", "HPHR_OUT", - "AMIC2", "MIC BIAS2", - "VA DMIC0", "MIC BIAS3", - "VA DMIC1", "MIC BIAS3", - "VA DMIC2", "MIC BIAS1", - "VA DMIC3", "MIC BIAS1", - "VA DMIC0", "VA MIC BIAS3", - "VA DMIC1", "VA MIC BIAS3", - "VA DMIC2", "VA MIC BIAS1", - "VA DMIC3", "VA MIC BIAS1", - "TX SWR_INPUT1", "ADC2_OUTPUT"; - - wcd-playback-dai-link { - link-name = "WCD Playback"; - - cpu { - sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; - }; - - codec { - sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - wcd-capture-dai-link { - link-name = "WCD Capture"; - - cpu { - sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; - }; - - codec { - sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - wsa-dai-link { - link-name = "WSA Playback"; - - cpu { - sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; - }; - - codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - va-dai-link { - link-name = "VA Capture"; - - cpu { - sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; - }; - - codec { - sound-dai = <&lpass_vamacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - }; - - vreg_edp_3p3: regulator-edp-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_EDP_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&edp_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_edp_bl: regulator-edp-bl { - compatible = "regulator-fixed"; - - regulator-name = "VBL9"; - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&edp_bl_reg_en>; - - regulator-boot-on; - }; - - vreg_misc_3p3: regulator-misc-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_MISC_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&misc_3p3_reg_en>; - - regulator-boot-on; - regulator-always-on; - }; - - vreg_nvme: regulator-nvme { - compatible = "regulator-fixed"; - - regulator-name = "VREG_NVME_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&nvme_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p15: regulator-rtmr0-1p15 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_1P15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - - gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_pwr_1p15_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p8: regulator-rtmr0-1p8 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_1P8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_1p8_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_3p3: regulator-rtmr0-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_3p3_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_vph_pwr: regulator-vph-pwr { - compatible = "regulator-fixed"; - - regulator-name = "vreg_vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - - regulator-always-on; - regulator-boot-on; - }; - - vreg_wcn_3p3: regulator-wcn-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&wcn_sw_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - /* - * TODO: These two regulators are actually part of the removable M.2 - * card and not the CRD mainboard. Need to describe this differently. - * Functionally it works correctly, because all we need to do is to - * turn on the actual 3.3V supply above. - */ - vreg_wcn_0p95: regulator-wcn-0p95 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_0P95"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - - vin-supply = <&vreg_wcn_3p3>; - }; - - vreg_wcn_1p9: regulator-wcn-1p9 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_1P9"; - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - - vin-supply = <&vreg_wcn_3p3>; - }; - - wcn6855-pmu { - compatible = "qcom,wcn6855-pmu"; - - vddaon-supply = <&vreg_wcn_0p95>; - vddio-supply = <&vreg_wcn_1p9>; - vddpcie1p3-supply = <&vreg_wcn_1p9>; - vddpcie1p9-supply = <&vreg_wcn_1p9>; - vddpmu-supply = <&vreg_wcn_0p95>; - vddpmumx-supply = <&vreg_wcn_0p95>; - vddpmucx-supply = <&vreg_wcn_0p95>; - vddrfa0p95-supply = <&vreg_wcn_0p95>; - vddrfa1p3-supply = <&vreg_wcn_1p9>; - vddrfa1p9-supply = <&vreg_wcn_1p9>; - - wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; - bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&wcn_wlan_bt_en>; - pinctrl-names = "default"; - - regulators { - vreg_pmu_rfa_cmn_0p8: ldo0 { - regulator-name = "vreg_pmu_rfa_cmn_0p8"; - }; - - vreg_pmu_aon_0p8: ldo1 { - regulator-name = "vreg_pmu_aon_0p8"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name = "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p8: ldo3 { - regulator-name = "vreg_pmu_wlmx_0p8"; - }; - - vreg_pmu_btcmx_0p8: ldo4 { - regulator-name = "vreg_pmu_btcmx_0p8"; - }; - - vreg_pmu_pcie_1p8: ldo5 { - regulator-name = "vreg_pmu_pcie_1p8"; - }; - - vreg_pmu_pcie_0p9: ldo6 { - regulator-name = "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_rfa_0p8: ldo7 { - regulator-name = "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo8 { - regulator-name = "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p7: ldo9 { - regulator-name = "vreg_pmu_rfa_1p7"; - }; - }; - }; - - usb-1-ss1-sbu-mux { - compatible = "onnn,fsusb42", "gpio-sbu-mux"; - - enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; - select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&usb_1_ss1_sbu_default>; - pinctrl-names = "default"; - - mode-switch; - orientation-switch; - - port { - usb_1_ss1_sbu_mux: endpoint { - remote-endpoint = <&pmic_glink_ss1_sbu>; - }; - }; - }; }; -&apps_rsc { - regulators-0 { - compatible = "qcom,pm8550-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob1-supply = <&vreg_vph_pwr>; - vdd-bob2-supply = <&vreg_vph_pwr>; - vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; - vdd-l2-l13-l14-supply = <&vreg_bob1>; - vdd-l5-l16-supply = <&vreg_bob1>; - vdd-l6-l7-supply = <&vreg_bob2>; - vdd-l8-l9-supply = <&vreg_bob1>; - vdd-l12-supply = <&vreg_s5j_1p2>; - vdd-l15-supply = <&vreg_s4c_1p8>; - vdd-l17-supply = <&vreg_bob2>; - - vreg_bob1: bob1 { - regulator-name = "vreg_bob1"; - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_bob2: bob2 { - regulator-name = "vreg_bob2"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1b_1p8: ldo1 { - regulator-name = "vreg_l1b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2b_3p0: ldo2 { - regulator-name = "vreg_l2b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4b_1p8: ldo4 { - regulator-name = "vreg_l4b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l5b_3p0: ldo5 { - regulator-name = "vreg_l5b_3p0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6b_1p8: ldo6 { - regulator-name = "vreg_l6b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7b_2p8: ldo7 { - regulator-name = "vreg_l7b_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8b_3p0: ldo8 { - regulator-name = "vreg_l8b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9b_2p9: ldo9 { - regulator-name = "vreg_l9b_2p9"; - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l10b_1p8: ldo10 { - regulator-name = "vreg_l10b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l12b_1p2: ldo12 { - regulator-name = "vreg_l12b_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; - }; - - vreg_l13b_3p0: ldo13 { - regulator-name = "vreg_l13b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l14b_3p0: ldo14 { - regulator-name = "vreg_l14b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l15b_1p8: ldo15 { - regulator-name = "vreg_l15b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; - }; - - vreg_l16b_2p9: ldo16 { - regulator-name = "vreg_l16b_2p9"; - regulator-min-microvolt = <2912000>; - regulator-max-microvolt = <2912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l17b_2p5: ldo17 { - regulator-name = "vreg_l17b_2p5"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-1 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s4-supply = <&vreg_vph_pwr>; - - vreg_s4c_1p8: smps4 { - regulator-name = "vreg_s4c_1p8"; - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1c_1p2: ldo1 { - regulator-name = "vreg_l1c_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2c_0p8: ldo2 { - regulator-name = "vreg_l2c_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3c_0p8: ldo3 { - regulator-name = "vreg_l3c_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-2 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "d"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s4c_1p8>; - vdd-s1-supply = <&vreg_vph_pwr>; - - vreg_l1d_0p8: ldo1 { - regulator-name = "vreg_l1d_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2d_0p9: ldo2 { - regulator-name = "vreg_l2d_0p9"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3d_1p8: ldo3 { - regulator-name = "vreg_l3d_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-3 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "e"; - - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s5j_1p2>; - - vreg_l2e_0p8: ldo2 { - regulator-name = "vreg_l2e_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3e_1p2: ldo3 { - regulator-name = "vreg_l3e_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-4 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "f"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s5j_1p2>; - vdd-s1-supply = <&vreg_vph_pwr>; - - vreg_s1f_0p7: smps1 { - regulator-name = "vreg_s1f_0p7"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1f_1p0: ldo1 { - regulator-name = "vreg_l1f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2f_1p0: ldo2 { - regulator-name = "vreg_l2f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3f_1p0: ldo3 { - regulator-name = "vreg_l3f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-6 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "i"; - - vdd-l1-supply = <&vreg_s4c_1p8>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s1-supply = <&vreg_vph_pwr>; - vdd-s2-supply = <&vreg_vph_pwr>; - - vreg_s1i_0p9: smps1 { - regulator-name = "vreg_s1i_0p9"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s2i_1p0: smps2 { - regulator-name = "vreg_s2i_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1i_1p8: ldo1 { - regulator-name = "vreg_l1i_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2i_1p2: ldo2 { - regulator-name = "vreg_l2i_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3i_0p8: ldo3 { - regulator-name = "vreg_l3i_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-7 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "j"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s5-supply = <&vreg_vph_pwr>; - - vreg_s5j_1p2: smps5 { - regulator-name = "vreg_s5j_1p2"; - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1j_0p8: ldo1 { - regulator-name = "vreg_l1j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2j_1p2: ldo2 { - regulator-name = "vreg_l2j_1p2"; - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1256000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3j_0p8: ldo3 { - regulator-name = "vreg_l3j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; -}; - -&gpu { - status = "okay"; - - zap-shader { - firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn"; - }; -}; - -&i2c0 { - clock-frequency = <400000>; - - status = "okay"; - - keyboard@3a { - compatible = "hid-over-i2c"; - reg = <0x3a>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l12b_1p2>; - - pinctrl-0 = <&kybd_default>; - pinctrl-names = "default"; - - wakeup-source; - }; - - touchpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l12b_1p2>; - - pinctrl-0 = <&tpad_default>; - pinctrl-names = "default"; - - wakeup-source; - }; -}; - -&i2c3 { - clock-frequency = <400000>; - - status = "okay"; - - typec-mux@8 { - compatible = "parade,ps8830"; - reg = <0x08>; - - clocks = <&rpmhcc RPMH_RF_CLK3>; - - vdd-supply = <&vreg_rtmr0_1p15>; - vdd33-supply = <&vreg_rtmr0_3p3>; - vdd33-cap-supply = <&vreg_rtmr0_3p3>; - vddar-supply = <&vreg_rtmr0_1p15>; - vddat-supply = <&vreg_rtmr0_1p15>; - vddio-supply = <&vreg_rtmr0_1p8>; - - reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&rtmr0_default>; - pinctrl-names = "default"; - - orientation-switch; - retimer-switch; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - retimer_ss0_ss_out: endpoint { - remote-endpoint = <&pmic_glink_ss0_ss_in>; - }; - }; - - port@1 { - reg = <1>; - - retimer_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; - }; - }; - - port@2 { - reg = <2>; - - retimer_ss0_con_sbu_out: endpoint { - remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; - }; - }; - }; - }; -}; - -&i2c5 { - clock-frequency = <400000>; - status = "okay"; - - eusb3_repeater: redriver@47 { - compatible = "nxp,ptn3222"; - reg = <0x47>; - #phy-cells = <0>; - - vdd3v3-supply = <&vreg_l13b_3p0>; - vdd1v8-supply = <&vreg_l4b_1p8>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&eusb3_reset_n>; - pinctrl-names = "default"; - - }; -}; - -&i2c8 { - clock-frequency = <400000>; - - status = "okay"; - - touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l15b_1p8>; - - pinctrl-0 = <&ts0_default>; - pinctrl-names = "default"; - }; -}; - -&lpass_tlmm { - spkr_01_sd_n_active: spkr-01-sd-n-active-state { - pins = "gpio12"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; -}; - -&lpass_vamacro { - pinctrl-0 = <&dmic01_default>, <&dmic23_default>; - pinctrl-names = "default"; - - vdd-micb-supply = <&vreg_l1b_1p8>; - qcom,dmic-sample-rate = <4800000>; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dp0 { - status = "okay"; -}; - -&mdss_dp0_out { - data-lanes = <0 1>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; -}; - -&mdss_dp1 { - status = "okay"; -}; - -&mdss_dp1_out { - data-lanes = <0 1>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; -}; - -&mdss_dp3 { - /delete-property/ #sound-dai-cells; - - status = "okay"; - - aux-bus { - panel { - compatible = "edp-panel"; - power-supply = <&vreg_edp_3p3>; - - backlight = <&backlight>; - - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss_dp3_out>; - }; - }; - }; - }; - - ports { - port@1 { - reg = <1>; - - mdss_dp3_out: endpoint { - data-lanes = <0 1 2 3>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; - - remote-endpoint = <&edp_panel_in>; - }; - }; - }; -}; - -&mdss_dp3_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&pcie4_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie4_phy { - vdda-phy-supply = <&vreg_l3i_0p8>; - vdda-pll-supply = <&vreg_l3e_1p2>; - - status = "okay"; -}; - -&pcie4_port0 { - wifi@0 { - compatible = "pci17cb,1107"; - reg = <0x10000 0x0 0x0 0x0 0x0>; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; - vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; - }; -}; - -&pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - - vddpe-3v3-supply = <&vreg_nvme>; - - pinctrl-0 = <&pcie6a_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie6a_phy { - vdda-phy-supply = <&vreg_l1d_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pm8550_gpios { - rtmr0_default: rtmr0-reset-n-active-state { - pins = "gpio10"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; - - usb0_3p3_reg_en: usb0-3p3-reg-en-state { - pins = "gpio11"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pm8550ve_8_gpios { - misc_3p3_reg_en: misc-3p3-reg-en-state { - pins = "gpio6"; - function = "normal"; - bias-disable; - drive-push-pull; - input-disable; - output-enable; - power-source = <1>; /* 1.8 V */ - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; -}; - -&pm8550ve_9_gpios { - usb0_1p8_reg_en: usb0-1p8-reg-en-state { - pins = "gpio8"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pmc8380_3_gpios { - edp_bl_en: edp-bl-en-state { - pins = "gpio4"; - function = "normal"; - power-source = <1>; /* 1.8V */ - input-disable; - output-enable; - }; - - edp_bl_reg_en: edp-bl-reg-en-state { - pins = "gpio10"; - function = "normal"; - }; - -}; - -&pmc8380_5_gpios { - usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { - pins = "gpio8"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pmk8550_gpios { - edp_bl_pwm: edp-bl-pwm-state { - pins = "gpio5"; - function = "func3"; - }; -}; - -&pmk8550_pwm { - status = "okay"; -}; - -&qupv3_0 { - status = "okay"; -}; - -&qupv3_1 { - status = "okay"; -}; - -&qupv3_2 { - status = "okay"; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn"; }; &remoteproc_adsp { @@ -1242,335 +33,3 @@ status = "okay"; }; - -&smb2360_0 { - status = "okay"; -}; - -&smb2360_0_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l2b_3p0>; -}; - -&smb2360_1 { - status = "okay"; -}; - -&smb2360_1_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l14b_3p0>; -}; - -&swr0 { - pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; - pinctrl-names = "default"; - - status = "okay"; - - /* WSA8845, Left Speaker */ - left_spkr: speaker@0,0 { - compatible = "sdw20217020400"; - reg = <0 0>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "SpkrLeft"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <1 2 3 7 10 13>; - }; - - /* WSA8845, Right Speaker */ - right_spkr: speaker@0,1 { - compatible = "sdw20217020400"; - reg = <0 1>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "SpkrRight"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <4 5 6 7 11 13>; - }; -}; - -&swr1 { - status = "okay"; - - /* WCD9385 RX */ - wcd_rx: codec@0,4 { - compatible = "sdw20217010d00"; - reg = <0 4>; - qcom,rx-port-mapping = <1 2 3 4 5>; - }; -}; - -&swr2 { - status = "okay"; - - /* WCD9385 TX */ - wcd_tx: codec@0,3 { - compatible = "sdw20217010d00"; - reg = <0 3>; - qcom,tx-port-mapping = <2 2 3 4>; - }; -}; - -&tlmm { - gpio-reserved-ranges = <34 2>, /* Unused */ - <44 4>, /* SPI (TPM) */ - <72 2>, /* Secure EC I2C connection (?) */ - <238 1>; /* UFS Reset */ - - edp_reg_en: edp-reg-en-state { - pins = "gpio70"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - eusb3_reset_n: eusb3-reset-n-state { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; - - hall_int_n_default: hall-int-n-state { - pins = "gpio92"; - function = "gpio"; - bias-disable; - }; - - kybd_default: kybd-default-state { - pins = "gpio67"; - function = "gpio"; - bias-pull-up; - }; - - nvme_reg_en: nvme-reg-en-state { - pins = "gpio18"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - pcie4_default: pcie4-default-state { - clkreq-n-pins { - pins = "gpio147"; - function = "pcie4_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio146"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio148"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie6a_default: pcie6a-default-state { - clkreq-n-pins { - pins = "gpio153"; - function = "pcie6a_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio152"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio154"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - tpad_default: tpad-default-state { - pins = "gpio3"; - function = "gpio"; - bias-pull-up; - }; - - ts0_default: ts0-default-state { - int-n-pins { - pins = "gpio51"; - function = "gpio"; - bias-pull-up; - }; - - reset-n-pins { - pins = "gpio48"; - function = "gpio"; - output-high; - drive-strength = <16>; - }; - }; - - usb_1_ss1_sbu_default: usb-1-ss1-sbu-state { - mode-pins { - pins = "gpio177"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - output-high; - }; - - oe-n-pins { - pins = "gpio179"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; - - sel-pins { - pins = "gpio178"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; - }; - - wcd_default: wcd-reset-n-active-state { - pins = "gpio191"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; - - wcn_sw_en: wcn-sw-en-state { - pins = "gpio214"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wcn_wlan_bt_en: wcn-wlan-bt-en-state { - pins = "gpio116", "gpio117"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; - -&uart14 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn6855-bt"; - max-speed = <3200000>; - - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; - vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - }; -}; - -&usb_1_ss0_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_0_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss0_qmpphy { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l1j_0p8>; - - status = "okay"; -}; - -&usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss0_dwc3_hs { - remote-endpoint = <&pmic_glink_ss0_hs_in>; -}; - -&usb_1_ss0_qmpphy_out { - remote-endpoint = <&retimer_ss0_ss_in>; -}; - -&usb_1_ss1_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_1_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss1_qmpphy { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l2d_0p9>; - - status = "okay"; -}; - -&usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss1_dwc3_hs { - remote-endpoint = <&pmic_glink_ss1_hs_in>; -}; - -&usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; -}; - -&usb_mp { - status = "okay"; -}; - -&usb_mp_dwc3 { - phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>; - phy-names = "usb2-0", "usb3-0"; -}; - -&usb_mp_hsphy0 { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; - - phys = <&eusb3_repeater>; - - status = "okay"; -}; - -&usb_mp_qmpphy0 { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l3c_0p8>; - - status = "okay"; -}; |