diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso new file mode 100644 index 000000000000..a19bc0840392 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Overlay for an IMX462 camera sensor on connector J1 on R-Car V4H + * ES3.0 Sparrow Hawk board. + * + * Copyright 2025 Renesas Electronics Corp. + * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/media/video-interfaces.h> + +&{/} { + clk_cam_j1: clk-cam-j1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <37125000>; + }; + + /* Page 29 / CSI_IF_CN / J1 */ + reg_cam_j1: reg-cam-j1 { + compatible = "regulator-fixed"; + regulator-name = "cam-J1"; + enable-active-high; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + cam@1a { + compatible = "sony,imx462lqr"; + reg = <0x1a>; + + clocks = <&clk_cam_j1>; + clock-names = "xclk"; + clock-frequency = <37125000>; + + vdddo-supply = <®_cam_j1>; + vdda-supply = <®_cam_j1>; + vddd-supply = <®_cam_j1>; + + orientation = <2>; + rotation = <0>; + + port { + imx462_j1_out: endpoint { + link-frequencies = /bits/ 64 <222750000 148500000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; +}; + +/* Page 29 / CSI_IF_CN */ +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&imx462_j1_out>; + }; + }; + }; +}; + +&isp0 { + status = "okay"; +}; + +&vin00 { + status = "okay"; +}; + +&vin01 { + status = "okay"; +}; + +&vin02 { + status = "okay"; +}; + +&vin03 { + status = "okay"; +}; + +&vin04 { + status = "okay"; +}; + +&vin05 { + status = "okay"; +}; + +&vin06 { + status = "okay"; +}; + +&vin07 { + status = "okay"; +}; |