| Age | Commit message (Collapse) | Author | Lines |
|---|
|
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Link: https://patch.msgid.link/2026022326-shack-headstone-ef6f@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: Petko Manolov <petkan@nucleusys.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022347-legibly-attest-cc5c@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver")
Link: https://patch.msgid.link/2026022329-flashing-ought-7573@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Do not share the page cache if the real @aops differs
- Fix the incomplete condition for interlaced plain extents
- Get rid of more unnecessary #ifdefs
* tag 'erofs-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix interlaced plain identification for encoded extents
erofs: remove more unnecessary #ifdefs
erofs: allow sharing page cache with the same aops only
|
|
A workaround was introduced in commit 1fb710793ce2 ("drm/amdgpu: Enable
MES lr_compute_wa by default") to help with some hangs observed in gfx1151.
This WA didn't fully fix the issue. It was actually fixed by adjusting
the VGPR size to the correct value that matched the hardware in commit
b42f3bf9536c ("drm/amdkfd: bump minimum vgpr size for gfx1151").
There are reports of instability on other products with newer GC microcode
versions, and I believe they're caused by this workaround. As we don't
need the workaround any more, remove it.
Fixes: b42f3bf9536c ("drm/amdkfd: bump minimum vgpr size for gfx1151")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9973e64bd6ee7642860a6f3b6958cbf14e89cabd)
Cc: stable@vger.kernel.org
|
|
If the device has not recovered after slot reset is called, it goes to
out label for error handling. There it could make decision based on
uninitialized hive pointer and could result in accessing an uninitialized
list.
Initialize the list and hive properly so that it handles the error
situation and also releases the reset domain lock which is acquired
during error_detected callback.
Fixes: 732c6cefc1ec ("drm/amdgpu: Replace tmp_adev with hive in amdgpu_pci_slot_reset")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bb71362182e59caa227e4192da5a612b09349696)
|
|
This will set AMDGPU_VCN_SMU_DPM_INTERFACE_* smu_type
based on soc type and fixing ring timeout issue seen
for DPM enabled case.
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f0f23c315b38c55e8ce9484cf59b65811f350630)
|
|
Do not unlock psp->ras_context.mutex if it has not been locked. This has
been detected by the Clang thread-safety analyzer.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: b3fb79cda568 ("drm/amdgpu: add mutex to protect ras shared memory")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6fa01b4335978051d2cd80841728fd63cc597970)
|
|
Mutexes must be unlocked before these are destroyed. This has been detected
by the Clang thread-safety analyzer.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: f5e4cc8461c4 ("drm/amdgpu: implement RAS ACA driver framework")
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 270258ba320beb99648dceffb67e86ac76786e55)
|
|
This can be called while preemption is disabled, for example by
dcn32_internal_validate_bw which is called with the FPU active.
Fixes "BUG: scheduling while atomic" messages I encounter on my Navi31
machine.
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b42dae2ebc5c84a68de63ec4ffdfec49362d53f1)
Cc: stable@vger.kernel.org
|
|
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476)
Cc: stable@vger.kernel.org
|
|
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5)
Cc: stable@vger.kernel.org
|
|
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: a292fdecd728 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c)
|
|
Drop reference to syncobj and timeline fence when aborting the ioctl due
output array being too small.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: a292fdecd728 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27)
Cc: <stable@vger.kernel.org> # v6.16+
|
|
Using legacy driver with latest firmware causes a power off issue.
Fix this by assigning a different filename (npu_7.sbin) to the latest
firmware. The driver attempts to load the latest firmware first and falls
back to the previous firmware version if loading fails.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5009
Fixes: f1eac46fe5f7 ("accel/amdxdna: Update firmware version check for latest firmware")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260225204752.2711734-1-lizhi.hou@amd.com
|
|
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260211175540.105677-2-cassel@kernel.org
|
|
Endpoint drivers use dw_pcie_ep_raise_msi_irq() to raise MSI interrupts to
the host. After 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU
mapping"), dw_pcie_ep_raise_msi_irq() caches the Message Address from the
MSI Capability in ep->msi_msg_addr. But that Message Address is controlled
by the host, and it may change. For example, if:
- firmware on the host configures the Message Address and triggers an
MSI,
- a driver on the Endpoint raises the MSI via dw_pcie_ep_raise_msi_irq(),
which caches the Message Address,
- a kernel on the host reconfigures the Message Address and the host
kernel driver triggers another MSI,
dw_pcie_ep_raise_msi_irq() notices that the Message Address no longer
matches the cached ep->msi_msg_addr, warns about it, and returns error
instead of raising the MSI. The host kernel may hang because it never
receives the MSI.
This was seen with the nvmet_pci_epf_driver: the host UEFI performs NVMe
commands, e.g. Identify Controller to get the name of the controller,
nvmet-pci-epf posts the completion queue entry and raises an IRQ using
dw_pcie_ep_raise_msi_irq(). When the host boots Linux, we see a
WARN_ON_ONCE() from dw_pcie_ep_raise_msi_irq(), and the host kernel hangs
because the nvme driver never gets an IRQ.
Remove the warning when dw_pcie_ep_raise_msi_irq() notices that Message
Address has changed, remap using the new address, and update the
ep->msi_msg_addr cache.
Fixes: 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260210181225.3926165-2-cassel@kernel.org
|
|
The ARM64_WORKAROUND_REPEAT_TLBI workaround is used to mitigate several
errata where broadcast TLBI;DSB sequences don't provide all the
architecturally required synchronization. The workaround performs more
work than necessary, and can have significant overhead. This patch
optimizes the workaround, as explained below.
The workaround was originally added for Qualcomm Falkor erratum 1009 in
commit:
d9ff80f83ecb ("arm64: Work around Falkor erratum 1009")
As noted in the message for that commit, the workaround is applied even
in cases where it is not strictly necessary.
The workaround was later reused without changes for:
* Arm Cortex-A76 erratum #1286807
SDEN v33: https://developer.arm.com/documentation/SDEN-885749/33-0/
* Arm Cortex-A55 erratum #2441007
SDEN v16: https://developer.arm.com/documentation/SDEN-859338/1600/
* Arm Cortex-A510 erratum #2441009
SDEN v19: https://developer.arm.com/documentation/SDEN-1873351/1900/
The important details to note are as follows:
1. All relevant errata only affect the ordering and/or completion of
memory accesses which have been translated by an invalidated TLB
entry. The actual invalidation of TLB entries is unaffected.
2. The existing workaround is applied to both broadcast and local TLB
invalidation, whereas for all relevant errata it is only necessary to
apply a workaround for broadcast invalidation.
3. The existing workaround replaces every TLBI with a TLBI;DSB;TLBI
sequence, whereas for all relevant errata it is only necessary to
execute a single additional TLBI;DSB sequence after any number of
TLBIs are completed by a DSB.
For example, for a sequence of batched TLBIs:
TLBI <op1>[, <arg1>]
TLBI <op2>[, <arg2>]
TLBI <op3>[, <arg3>]
DSB ISH
... the existing workaround will expand this to:
TLBI <op1>[, <arg1>]
DSB ISH // additional
TLBI <op1>[, <arg1>] // additional
TLBI <op2>[, <arg2>]
DSB ISH // additional
TLBI <op2>[, <arg2>] // additional
TLBI <op3>[, <arg3>]
DSB ISH // additional
TLBI <op3>[, <arg3>] // additional
DSB ISH
... whereas it is sufficient to have:
TLBI <op1>[, <arg1>]
TLBI <op2>[, <arg2>]
TLBI <op3>[, <arg3>]
DSB ISH
TLBI <opX>[, <argX>] // additional
DSB ISH // additional
Using a single additional TBLI and DSB at the end of the sequence can
have significantly lower overhead as each DSB which completes a TLBI
must synchronize with other PEs in the system, with potential
performance effects both locally and system-wide.
4. The existing workaround repeats each specific TLBI operation, whereas
for all relevant errata it is sufficient for the additional TLBI to
use *any* operation which will be broadcast, regardless of which
translation regime or stage of translation the operation applies to.
For example, for a single TLBI:
TLBI ALLE2IS
DSB ISH
... the existing workaround will expand this to:
TLBI ALLE2IS
DSB ISH
TLBI ALLE2IS // additional
DSB ISH // additional
... whereas it is sufficient to have:
TLBI ALLE2IS
DSB ISH
TLBI VALE1IS, XZR // additional
DSB ISH // additional
As the additional TLBI doesn't have to match a specific earlier TLBI,
the additional TLBI can be implemented in separate code, with no
memory of the earlier TLBIs. The additional TLBI can also use a
cheaper TLBI operation.
5. The existing workaround is applied to both Stage-1 and Stage-2 TLB
invalidation, whereas for all relevant errata it is only necessary to
apply a workaround for Stage-1 invalidation.
Architecturally, TLBI operations which invalidate only Stage-2
information (e.g. IPAS2E1IS) are not required to invalidate TLB
entries which combine information from Stage-1 and Stage-2
translation table entries, and consequently may not complete memory
accesses translated by those combined entries. In these cases,
completion of memory accesses is only guaranteed after subsequent
invalidation of Stage-1 information (e.g. VMALLE1IS).
Taking the above points into account, this patch reworks the workaround
logic to reduce overhead:
* New __tlbi_sync_s1ish() and __tlbi_sync_s1ish_hyp() functions are
added and used in place of any dsb(ish) which is used to complete
broadcast Stage-1 TLB maintenance. When the
ARM64_WORKAROUND_REPEAT_TLBI workaround is enabled, these helpers will
execute an additional TLBI;DSB sequence.
For consistency, it might make sense to add __tlbi_sync_*() helpers
for local and stage 2 maintenance. For now I've left those with
open-coded dsb() to keep the diff small.
* The duplication of TLBIs in __TLBI_0() and __TLBI_1() is removed. This
is no longer needed as the necessary synchronization will happen in
__tlbi_sync_s1ish() or __tlbi_sync_s1ish_hyp().
* The additional TLBI operation is chosen to have minimal impact:
- __tlbi_sync_s1ish() uses "TLBI VALE1IS, XZR". This is only used at
EL1 or at EL2 with {E2H,TGE}=={1,1}, where it will target an unused
entry for the reserved ASID in the kernel's own translation regime,
and have no adverse affect.
- __tlbi_sync_s1ish_hyp() uses "TLBI VALE2IS, XZR". This is only used
in hyp code, where it will target an unused entry in the hyp code's
TTBR0 mapping, and should have no adverse effect.
* As __TLBI_0() and __TLBI_1() no longer replace each TLBI with a
TLBI;DSB;TLBI sequence, batching TLBIs is worthwhile, and there's no
need for arch_tlbbatch_should_defer() to consider
ARM64_WORKAROUND_REPEAT_TLBI.
When building defconfig with GCC 15.1.0, compared to v6.19-rc1, this
patch saves ~1KiB of text, makes the vmlinux ~42KiB smaller, and makes
the resulting Image 64KiB smaller:
| [mark@lakrids:~/src/linux]% size vmlinux-*
| text data bss dec hex filename
| 21179831 19660919 708216 41548966 279fca6 vmlinux-after
| 21181075 19660903 708216 41550194 27a0172 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -l vmlinux-*
| -rwxr-xr-x 1 mark mark 157771472 Feb 4 12:05 vmlinux-after
| -rwxr-xr-x 1 mark mark 157815432 Feb 4 12:05 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -l Image-*
| -rw-r--r-- 1 mark mark 41007616 Feb 4 12:05 Image-after
| -rw-r--r-- 1 mark mark 41073152 Feb 4 12:05 Image-before
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The TLBI instruction accepts XZR as a register argument, and for TLBI
operations with a register argument, there is no functional difference
between using XZR or another GPR which contains zeroes. Operations
without a register argument are encoded as if XZR were used.
Allow the __TLBI_1() macro to use XZR when a register argument is all
zeroes.
Today this only results in a trivial code saving in
__do_compat_cache_op()'s workaround for Neoverse-N1 erratum #1542419. In
subsequent patches this pattern will be used more generally.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A GCS mapping should not be accessible after mprotect(PROT_NONE). Add a
kselftest for this scenario.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
vm_get_page_prot() short-circuits the protection_map[] lookup for a
VM_SHADOW_STACK mapping since it uses a different PIE index from the
typical read/write/exec permissions. However, the side effect is that it
also ignores mprotect(PROT_NONE) by creating an accessible PTE.
Special-case the !(vm_flags & VM_ACCESS_FLAGS) flags to use the
protection_map[VM_NONE] permissions instead. No GCS attributes are
required for an inaccessible PTE.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba694 ("arm64/mm: Map pages for guarded control stack")
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the
shareability attribute with bits 50-51 of the output address. The
_PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this
matches the other _PAGE_* definitions) but using this macro directly
leads to the following panic when enabling GCS on a system/model with
LPA2:
Unable to handle kernel paging request at virtual address fffff1ffc32d8008
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000
[fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025
pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : zap_huge_pmd+0x168/0x468
lr : zap_huge_pmd+0x2c/0x468
sp : ffff800080beb660
x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898
x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41
x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000
x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007
x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000
x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff
x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370
x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000
x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600
Call trace:
zap_huge_pmd+0x168/0x468 (P)
unmap_page_range+0xd70/0x1560
unmap_single_vma+0x48/0x80
unmap_vmas+0x90/0x180
unmap_region+0x88/0xe4
vms_complete_munmap_vmas+0xf8/0x1e0
do_vmi_align_munmap+0x158/0x180
do_vmi_munmap+0xac/0x160
__vm_munmap+0xb0/0x138
vm_munmap+0x14/0x20
gcs_free+0x70/0x80
mm_release+0x1c/0xc8
exit_mm_release+0x28/0x38
do_exit+0x190/0x8ec
do_group_exit+0x34/0x90
get_signal+0x794/0x858
arch_do_signal_or_restart+0x11c/0x3e0
exit_to_user_mode_loop+0x10c/0x17c
el0_da+0x8c/0x9c
el0t_64_sync_handler+0xd0/0xf0
el0t_64_sync+0x198/0x19c
Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420)
Similarly to how the kernel handles protection_map[], use a
gcs_page_prot variable to store the protection bits and clear PTE_SHARED
if LPA2 is enabled.
Also remove the unused PAGE_GCS{,_RO} macros.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba694 ("arm64/mm: Map pages for guarded control stack")
Reported-by: Emanuele Rocca <emanuele.rocca@arm.com>
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The only caller of ioremap_prot() outside of the generic ioremap()
implementation is generic_access_phys(), which passes a 'pgprot_t' value
determined from the user mapping of the target 'pfn' being accessed by
the kernel. On arm64, the 'pgprot_t' contains all of the non-address
bits from the pte, including the permission controls, and so we end up
returning a new user mapping from ioremap_prot() which faults when
accessed from the kernel on systems with PAN:
| Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000
| ...
| Call trace:
| __memcpy_fromio+0x80/0xf8
| generic_access_phys+0x20c/0x2b8
| __access_remote_vm+0x46c/0x5b8
| access_remote_vm+0x18/0x30
| environ_read+0x238/0x3e8
| vfs_read+0xe4/0x2b0
| ksys_read+0xcc/0x178
| __arm64_sys_read+0x4c/0x68
Extract only the memory type from the user 'pgprot_t' in ioremap_prot()
and assert that we're being passed a user mapping, to protect us against
any changes in future that may require additional handling. To avoid
falsely flagging users of ioremap(), provide our own ioremap() macro
which simply wraps __ioremap_prot().
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 893dea9ccd08 ("arm64: Add HAVE_IOREMAP_PROT support")
Reported-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Rename our ioremap_prot() implementation to __ioremap_prot() and convert
all arch-internal callers over to the new function.
ioremap_prot() remains as a #define to __ioremap_prot() for
generic_access_phys() and will be subsequently extended to handle user
permissions in 'prot'.
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, forgot to consider the case where the deferred QC
times out. Fix the code to take timeouts into consideration, which
avoids a use after free (Damien)
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, when unloading the module, calls cancel_work_sync(),
a function that can sleep, while holding a spin lock. Move the function
call outside the lock (Damien)
* tag 'ata-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: fix cancellation of a port deferred qc work
ata: libata-eh: correctly handle deferred qc timeouts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix an uninitialized variable in file_getattr().
The flags_valid field wasn't initialized before calling
vfs_fileattr_get(), triggering KMSAN uninit-value reports in fuse
- Fix writeback wakeup and logging timeouts when DETECT_HUNG_TASK is
not enabled.
sysctl_hung_task_timeout_secs is 0 in that case causing spurious
"waiting for writeback completion for more than 1 seconds" warnings
- Fix a null-ptr-deref in do_statmount() when the mount is internal
- Add missing kernel-doc description for the @private parameter in
iomap_readahead()
- Fix mount namespace creation to hold namespace_sem across the mount
copy in create_new_namespace().
The previous drop-and-reacquire pattern was fragile and failed to
clean up mount propagation links if the real rootfs was a shared or
dependent mount
- Fix /proc mount iteration where m->index wasn't updated when
m->show() overflows, causing a restart to repeatedly show the same
mount entry in a rapidly expanding mount table
- Return EFSCORRUPTED instead of ENOSPC in minix_new_inode() when the
inode number is out of range
- Fix unshare(2) when CLONE_NEWNS is set and current->fs isn't shared.
copy_mnt_ns() received the live fs_struct so if a subsequent
namespace creation failed the rollback would leave pwd and root
pointing to detached mounts. Always allocate a new fs_struct when
CLONE_NEWNS is requested
- fserror bug fixes:
- Remove the unused fsnotify_sb_error() helper now that all callers
have been converted to fserror_report_metadata
- Fix a lockdep splat in fserror_report() where igrab() takes
inode::i_lock which can be held in IRQ context.
Replace igrab() with a direct i_count bump since filesystems
should not report inodes that are about to be freed or not yet
exposed
- Handle error pointer in procfs for try_lookup_noperm()
- Fix an integer overflow in ep_loop_check_proc() where recursive calls
returning INT_MAX would overflow when +1 is added, breaking the
recursion depth check
- Fix a misleading break in pidfs
* tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: avoid misleading break
eventpoll: Fix integer overflow in ep_loop_check_proc()
proc: Fix pointer error dereference
fserror: fix lockdep complaint when igrabbing inode
fsnotify: drop unused helper
unshare: fix unshare_fs() handling
minix: Correct errno in minix_new_inode
namespace: fix proc mount iteration
mount: hold namespace_sem across copy in create_new_namespace()
iomap: Describe @private in iomap_readahead()
statmount: Fix the null-ptr-deref in do_statmount()
writeback: Fix wakeup and logging timeouts for !DETECT_HUNG_TASK
fs: init flags_valid before calling vfs_fileattr_get
|
|
Use the kernel.org address as a unified single entry to send patches
to. At the same time, update mailmap to group all past contributions.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When Linux is running as guest, runs a user space process and the
user space process accesses a page that the host has paged out,
the guest gets a pfault interrupt and schedules a different process.
Without this mechanism the host would have to suspend the whole
virtual CPU until the page has been paged in.
To setup the pfault interrupt the real address of parameter list
should be passed to DIAGNOSE 0x258, but a virtual address is passed
instead.
That has a performance impact, since the pfault setup never succeeds,
the interrupt is never delivered to a guest and the whole virtual CPU
is suspended as result.
Cc: stable@vger.kernel.org
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.
Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.
Fixes: f5730d44e05e ("s390: Add stackprotector support")
Reported-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Pull a small idle/vtime series with two cputime accounting fixes plus
related cleanups and minor improvements.
* idle-vtime-fixes-cleanups:
s390/idle: Remove psw_idle() prototype
s390/vtime: Use lockdep_assert_irqs_disabled() instead of BUG_ON()
s390/vtime: Use __this_cpu_read() / get rid of READ_ONCE()
s390/irq/idle: Remove psw bits early
s390/idle: Inline update_timer_idle()
s390/idle: Slightly optimize idle time accounting
s390/idle: Add comment for non obvious code
s390/vtime: Fix virtual timer forwarding
s390/idle: Fix cpu idle exit cpu time accounting
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
psw_idle() does not exist anymore. Remove its prototype.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use lockdep_assert_irqs_disabled() instead of BUG_ON(). This avoids
crashing the kernel, and generates better code if CONFIG_PROVE_LOCKING
is disabled.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
do_account_vtime() runs always with interrupts disabled, therefore use
__this_cpu_read() instead of this_cpu_read() to get rid of a pointless
preempt_disable() / preempt_enable() pair.
Also there are no concurrent writers to the cpu time accounting fields
in lowcore. Therefore get rid of READ_ONCE() usages.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Remove wait, io, external interrupt bits early in do_io_irq()/do_ext_irq()
when previous context was idle. This saves one conditional branch and is
closer to the original old assembly code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Inline update_timer_idle() again to avoid an extra function call. This
way the generated code is close to old assembler version again.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Slightly optimize account_idle_time_irq() and update_timer_idle():
- Use fast single instruction __atomic64() primitives to update per
cpu idle_time and idle_count, instead of READ_ONCE() / WRITE_ONCE()
pairs
- stcctm() is an inline assembly with a full memory barrier. This
leads to a not necessary extra dereference of smp_cpu_mtid in
update_timer_idle(). Avoid this and read smp_cpu_mtid into a
variable
- Use __this_cpu_add() instead of this_cpu_add() to avoid disabling /
enabling of preemption several times in a loop in update_timer_idle().
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add a comment to update_timer_idle() which describes why wall time (not
steal time) is added to steal_timer. This is not obvious and was reported
by Frederic Weisbecker.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/all/aXEVM-04lj0lntMr@localhost.localdomain/
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Since delayed accounting of system time [1] the virtual timer is
forwarded by do_account_vtime() but also vtime_account_kernel(),
vtime_account_softirq(), and vtime_account_hardirq(). This leads
to double accounting of system, guest, softirq, and hardirq time.
Remove accounting from the vtime_account*() family to restore old behavior.
There is only one user of the vtimer interface, which might explain
why nobody noticed this so far.
Fixes: b7394a5f4ce9 ("sched/cputime, s390: Implement delayed accounting of system time") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
With the conversion to generic entry [1] cpu idle exit cpu time accounting
was converted from assembly to C. This introduced an reversed order of cpu
time accounting.
On cpu idle exit the current accounting happens with the following call
chain:
-> do_io_irq()/do_ext_irq()
-> irq_enter_rcu()
-> account_hardirq_enter()
-> vtime_account_irq()
-> vtime_account_kernel()
vtime_account_kernel() accounts the passed cpu time since last_update_timer
as system time, and updates last_update_timer to the current cpu timer
value.
However the subsequent call of
-> account_idle_time_irq()
will incorrectly subtract passed cpu time from timer_idle_enter to the
updated last_update_timer value from system_timer. Then last_update_timer
is updated to a sys_enter_timer, which means that last_update_timer goes
back in time.
Subsequently account_hardirq_exit() will account too much cpu time as
hardirq time. The sum of all accounted cpu times is still correct, however
some cpu time which was previously accounted as system time is now
accounted as hardirq time, plus there is the oddity that last_update_timer
goes back in time.
Restore previous behavior by extracting cpu time accounting code from
account_idle_time_irq() into a new update_timer_idle() function and call it
before irq_enter_rcu().
Fixes: 56e62a737028 ("s390: convert to generic entry") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
We should use READ_ONCE when reading from a SQE, make sure timeout gets
a stable timespec address.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The default bdl_pos_adj of 32 for Nvidia HDA controllers is
insufficient on GA102 (and likely other recent Nvidia GPUs) after S3
suspend/resume. The controller's DMA timing degrades after resume,
causing premature IRQ detection in azx_position_ok() which results in
silent HDMI/DP audio output despite userspace reporting a valid
playback state and correct ELD data.
Increase bdl_pos_adj to 64 for AZX_DRIVER_NVIDIA, matching the value
already used by Intel Apollo Lake for the same class of timing issue.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221069
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Link: https://patch.msgid.link/20260225-nvidia-audio-fix-v1-1-b1383c37ec49@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the system is booted with kernel command line argument "nosmt" or
"maxcpus" to limit the number of CPUs, disabling turbo via:
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in a crash:
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
...
RIP: 0010:store_no_turbo+0x100/0x1f0
...
This occurs because for_each_possible_cpu() returns CPUs even if they
are not online. For those CPUs, all_cpu_data[] will be NULL. Since
commit 973207ae3d7c ("cpufreq: intel_pstate: Rearrange max frequency
updates handling code"), all_cpu_data[] is dereferenced even for CPUs
which are not online, causing the NULL pointer dereference.
To fix that, pass CPU number to intel_pstate_update_max_freq() and use
all_cpu_data[] for those CPUs for which there is a valid cpufreq policy.
Fixes: 973207ae3d7c ("cpufreq: intel_pstate: Rearrange max frequency updates handling code")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221068
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/20260225001752.890164-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ioctl structures in libxfs/xfs_fs.h are missing static size checks.
It is useful to have static size checks for these structures as adding
new fields to them could cause issues (e.g. extra padding that may be
inserted by the compiler). So add these checks to xfs/xfs_ondisk.h.
Due to different padding/alignment requirements across different
architectures, to avoid build failures, some structures are ommited from
the size checks. For example, structures with "compat_" definitions in
xfs/xfs_ioctl32.h are ommited.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
In libxfs/xfs_ondisk.h, remove some duplicate entries of
XFS_CHECK_STRUCT_SIZE().
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Add comments explaining when to use XFS_IS_CORRUPT() and ASSERT()
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Update lazy counters in xfs_growfs_rt_bmblock() similar to the way it
is done xfs_growfs_data_private(). This is because the lazy counters are
not always updated and synching the counters will avoid inconsistencies
between frexents and rtextents(total realtime extent count). This will
be more useful once realtime shrink is implemented as this will prevent
some transient state to occur where frexents might be greater than
total rtextents.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Add a comment explaining why the sb_frextents are updated outside the
if (xfs_has_lazycount(mp) check even though it is a lazycounter.
RT groups are supported only in v5 filesystems which always have
lazycounter enabled - so putting it inside the if(xfs_has_lazycount(mp)
check is redundant.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Bug description:
If the size of the last rtgroup i.e, the rtg passed to
xfs_last_rt_bmblock() is such that the last rtextent falls in 0th word
offset of a bmblock of the bitmap file tracking this (last) rtgroup,
then in that case xfs_last_rt_bmblock() incorrectly returns the next
bmblock number instead of the current/last used bmblock number.
When xfs_last_rt_bmblock() incorrectly returns the next bmblock,
the loop to grow/modify the bmblocks in xfs_growfs_rtg() doesn't
execute and xfs_growfs basically does a nop in certain cases.
xfs_growfs will do a nop when the new size of the fs will have the same
number of rtgroups i.e, we are only growing the last rtgroup.
Reproduce:
$ mkfs.xfs -m metadir=0 -r rtdev=/dev/loop1 /dev/loop0 \
-r size=32769b -f
$ mount -o rtdev=/dev/loop1 /dev/loop0 /mnt/scratch
$ xfs_growfs -R $(( 32769 + 1 )) /mnt/scratch
$ xfs_info /mnt/scratch | grep rtextents
$ # We can see that rtextents hasn't changed
Fix:
Fix this by returning the current/last used bmblock when the last
rtgroup size is not a multiple xfs_rtbitmap_rtx_per_rbmblock()
and the next bmblock when the rtgroup size is a multiple of
xfs_rtbitmap_rtx_per_rbmblock() i.e, the existing blocks are
completely used up.
Also, I have renamed xfs_last_rt_bmblock() to
xfs_last_rt_bmblock_to_extend() to signify that this function
returns the bmblock number to extend and NOT always the last used
bmblock number.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Sam Sun apparently found a syzbot way to fuzz a filesystem such that
xfs_iget_cache_miss would free the inode before the fserror code could
catch up. Frustratingly he doesn't use the syzbot dashboard so there's
no C reproducer and not even a full error report, so I'm guessing that:
Inodes that are being constructed or torn down inside XFS are not
visible to the VFS. They should never be reported to fserror.
Also, any inode that has been freshly allocated in _cache_miss should be
marked INEW immediately because, well, it's an incompletely constructed
inode that isn't yet visible to the VFS.
Reported-by: Sam Sun <samsun1006219@gmail.com>
Fixes: 5eb4cb18e445d0 ("xfs: convey metadata health events to the health monitor")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Internal metadata inodes are not exposed to userspace programs, so it
makes no sense to pass them to the fserror functions (aka fsnotify).
Instead, report metadata file problems as general filesystem corruption.
Fixes: 5eb4cb18e445d0 ("xfs: convey metadata health events to the health monitor")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
