| Age | Commit message (Collapse) | Author | Lines |
|---|
|
The Blackbox 724-746-5500 USB Director USB-RS-232 HUB, part number
IC135A, is a rebadged Edgeport/4 with its own USB device id.
Signed-off-by: Frej Drejhammar <frej@stacken.kth.se>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This is an additional safety layer to ensure no accesses to the GPU
registers can be made while it is powered off.
While we can disable IRQ generation from GPU, META firmware, MIPS
firmware and for safety events, we cannot do the same for the RISC-V
firmware.
To keep a unified approach, once the firmware has completed its power
off sequence, disable IRQs for the while GPU at the kernel level
instead.
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260310-drain-irqs-before-suspend-v1-2-bf4f9ed68e75@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
The runtime PM suspend callback doesn't know whether the IRQ handler is
in progress on a different CPU core and doesn't wait for it to finish.
Depending on timing, the IRQ handler could be running while the GPU is
suspended, leading to kernel crashes when trying to access GPU
registers. See example signature below.
In a power off sequence initiated by the runtime PM suspend callback,
wait for any IRQ handlers in progress on other CPU cores to finish, by
calling synchronize_irq().
At the same time, remove the runtime PM resume/put calls in the threaded
IRQ handler. On top of not being the right approach to begin with, and
being at the wrong place as they should have wrapped all GPU register
accesses, the driver would hit a deadlock between synchronize_irq()
being called from a runtime PM suspend callback, holding the device
power lock, and the resume callback requiring the same.
Example crash signature on a TI AM68 SK platform:
[ 337.241218] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 337.241239] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241246] Tainted: [M]=MACHINE_CHECK
[ 337.241249] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241252] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 337.241256] pc : pvr_riscv_irq_pending+0xc/0x24
[ 337.241277] lr : pvr_device_irq_thread_handler+0x64/0x310
[ 337.241282] sp : ffff800085b0bd30
[ 337.241284] x29: ffff800085b0bd50 x28: ffff0008070d9eab x27: ffff800083a5ce10
[ 337.241291] x26: ffff000806e48f80 x25: ffff0008070d9eac x24: 0000000000000000
[ 337.241296] x23: ffff0008068e9bf0 x22: ffff0008068e9bd0 x21: ffff800085b0bd30
[ 337.241301] x20: ffff0008070d9e00 x19: ffff0008068e9000 x18: 0000000000000001
[ 337.241305] x17: 637365645f656c70 x16: 0000000000000000 x15: ffff000b7df9ff40
[ 337.241310] x14: 0000a585fe3c0d0e x13: 000000999704f060 x12: 000000000002771a
[ 337.241314] x11: 00000000000000c0 x10: 0000000000000af0 x9 : ffff800085b0bd00
[ 337.241318] x8 : ffff0008071175d0 x7 : 000000000000b955 x6 : 0000000000000003
[ 337.241323] x5 : 0000000000000000 x4 : 0000000000000002 x3 : 0000000000000000
[ 337.241327] x2 : ffff800080e39d20 x1 : ffff800080e3fc48 x0 : 0000000000000000
[ 337.241333] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 337.241337] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241342] Tainted: [M]=MACHINE_CHECK
[ 337.241343] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241345] Call trace:
[ 337.241348] show_stack+0x18/0x24 (C)
[ 337.241357] dump_stack_lvl+0x60/0x80
[ 337.241364] dump_stack+0x18/0x24
[ 337.241368] vpanic+0x124/0x2ec
[ 337.241373] abort+0x0/0x4
[ 337.241377] add_taint+0x0/0xbc
[ 337.241384] arm64_serror_panic+0x70/0x80
[ 337.241389] do_serror+0x3c/0x74
[ 337.241392] el1h_64_error_handler+0x30/0x48
[ 337.241400] el1h_64_error+0x6c/0x70
[ 337.241404] pvr_riscv_irq_pending+0xc/0x24 (P)
[ 337.241410] irq_thread_fn+0x2c/0xb0
[ 337.241416] irq_thread+0x170/0x334
[ 337.241421] kthread+0x12c/0x210
[ 337.241428] ret_from_fork+0x10/0x20
[ 337.241434] SMP: stopping secondary CPUs
[ 337.241451] Kernel Offset: disabled
[ 337.241453] CPU features: 0x040000,02002800,20002001,0400421b
[ 337.241456] Memory Limit: none
[ 337.457921] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Fixes: 96822d38ff57 ("drm/imagination: Handle Rogue safety event IRQs")
Cc: stable@vger.kernel.org # see patch description, needs adjustments for < 6.16
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260310-drain-irqs-before-suspend-v1-1-bf4f9ed68e75@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
The soft reset sequence is currently executed from the threaded IRQ
handler, hence it cannot call disable_irq() which internally waits
for IRQ handlers, i.e. itself, to complete.
Use disable_irq_nosync() during a soft reset instead.
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Cc: stable@vger.kernel.org
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260309-fix-soft-reset-v1-1-121113be554f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Use GAMMA22 for degamma/blend and GAMMA22_INV for shaper so
curves match the color pipeline.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5016
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The kernel-doc comment says wb_put but the actual function is
wb_put_many. Fix the name to match.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Kit Dallege <xaum.io@gmail.com>
Link: https://patch.msgid.link/20260315170931.65852-1-xaum.io@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For file systems implementing ->sync_lazytime, I_DIRTY_TIME fails to get
cleared in sync_lazytime, and might cause additional calls to
sync_lazytime during inode deactivation. Use the same pattern as in
__mark_inode_dirty to clear the flag under the inode lock.
Fixes: 5cf06ea56ee6 ("fs: add a ->sync_lazytime method")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260317134409.1691317-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Before this patch even GDM ports were assigned to QDMA0 while odd GDM
ports were using QDMA1, so, based on the DTS configuration, both QDMA0
and QDMA1 can theoretically receive traffic destinated to the host cpu
from LAN or WAN GDM ports.
Airoha folks reported the hw design assumes the LAN traffic destinated
to the host cpu is be forwarded to QDMA0 while traffic received on WAN
GDM port is managed by QDMA1. For this reason, select QDMA block according
to the GDM port LAN or WAN configuration:
- QDMA0 is used for GDM LAN devices
- QDMA1 is used for GDM WAN device
Assuming a device with three GDM ports, a typical configuration could be:
- MT7530 DSA switch -> GDM1 (eth0) -> QDMA0 (LAN traffic)
- External PHY -> GDM2 (eth1) -> QDMA1 (WAN traffic)
- External PHY -> GDM3 (eth2) -> QDMA0 (LAN traffic)
We can then bridge eth0 DSA port (lanX) with eth2 since they all tx/rx
LAN traffic.
Please note this patch introduces a change not visible to the user since
airoha_eth driver currently supports just the internal phy available via
the MT7530 DSA switch and there are no WAN interfaces officially supported
since PCS/external phy is not merged mainline yet (it will be posted with
following patches).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260313-airoha-qdma-lan-wan-mode-v2-1-7d577db6e40c@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add VID/PID 33f8:1003 for the Rolling Wireless RW135R-GL M.2 module,
which is used in laptop debug cards with MBIM interface for
Linux/Chrome OS. The device supports mbim, pipe functionalities.
Here are the outputs of usb-devices:
T: Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev=05.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
sensor:increase IR_MAX_DURATION to 1000ms
to fix long IR remote timeouts Certain infrared remotes
(e.g., brand-specific smart home remotes, custom consumer electronics)
send extended code sequences that exceed the default 500ms
IR_MAX_DURATION threshold. This causes the kernel's raw
IR driver to discard incomplete code, resulting in unrecognized commands.
Increase IR_MAX_DURATION to 1000ms:
- Aligns with common extended IR protocol specs
(most long sequences use 700-900ms)
- No impact on standard remotes
(all mainstream IR codes are <500ms)
- Validated on vivo X200 and vivo X300,
resolves timeout issues without regressions
Signed-off-by: LiPeng Huang <huanglipeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device references to reduce cargo culting, make it
easier to spot drivers where extra references are needed, and reduce the
risk of memory leaks when drivers fail to release them.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Buffers must not share a cache line with other data structures.
Allocate separately.
Fixes: 0938069fa0897 ("[media] rc: Add support for the TechnoTrend USB IR Receiver")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In a control request, the USB request structure
can be subject to DMA on some HCs. Hence it must obey
the rules for DMA coherency. Allocate it separately.
Fixes: b1c97193c6437 ("[media] rc: port IgorPlug-USB to rc-core")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The buffer for IO must not be part of the device structure
because that violates the DMA coherency rules.
Fixes: 02d32bdad3123 ("media: rc: add driver for Xbox DVD Movie Playback Kit")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
If submitting the URB fails, the device will be unusable.
Probe() must fail.
Fixes: 7a569f524dd36 ("V4L/DVB: IR/streamzap: functional in-kernel decoding")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Some rc device drivers have a race condition between rc_unregister_device()
and irq or urb callbacks. This is because rc_unregister_device() does two
things, it marks the device as unregistered so no new commands can be
issued and then it calls rc_free_device(). This means the driver has no
chance to cancel any pending urb callbacks or interrupts after the device
has been marked as unregistered. Those callbacks may access struct rc_dev
or its members (e.g. struct ir_raw_event_ctrl), which have been freed by
rc_free_device().
This change removes the implicit call to rc_free_device() from
rc_unregister_device(). This means that device drivers can call
rc_unregister_device() in their remove or disconnect function, then cancel
all the urbs and interrupts before explicitly calling rc_free_device().
Note this is an alternative fix for an issue found by Haotian Zhang, see
the Closes: tags.
Reported-by: Haotian Zhang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2
descriptors looks really wrong, if offset is not zero. What we want to get
for swapping is hva + offset, not hva + offset*8. ;-)
Fix it.
Fixes: f6927b41d573 ("KVM: arm64: Add helper for swapping guest descriptor")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260317115748.47332-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
Document the doubletap_enable sysfs attribute for ThinkPad ACPI driver.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://patch.msgid.link/20260311143144.482145-4-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a sysfs attribute to enable or disable TrackPoint double-tap hotkey
events at the kernel level.
The TrackPoint firmware enables double-tap support automatically. This
interface allows userspace to control whether double-tap events are
forwarded to userspace.
The attribute is available at:
/sys/devices/platform/thinkpad_acpi/doubletap_enable
0 - Disable double-tap hotkey events
1 - Enable double-tap hotkey events (default)
Filtering is implemented by suppressing ACPI hotkey delivery without
injecting synthetic input events.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260311143144.482145-3-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enable doubletap functionality by default on TrackPoint devices that
support it. The feature is detected using firmware ID pattern matching
(PNP: LEN03xxx) with a deny list of incompatible devices.
This provides immediate doubletap functionality without requiring
userspace configuration. The hardware is enabled during device
detection, while event filtering continues to be handled by the
thinkpad_acpi driver as before.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260311143144.482145-2-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If the IOMMU driver reports that ATS is not supported for a device, set
the IOMMU_HW_CAP_PCI_ATS_NOT_SUPPORTED flag in the returned hardware
capabilities.
This uses a negative flag for UAPI compatibility. Existing userspace
assumes ATS is supported if no flag is present. This also ensures that
new userspace works correctly on both old and new kernels, where a
zero value implies ATS support.
When this flag is set, ATS cannot be used for the device. When it is
clear, ATS may be enabled when an appropriate HWPT is attached.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
PCIe ATS may be disabled by platform firmware, root complex limitations,
or kernel policy even when a device advertises the ATS capability in its
PCI configuration space.
Add a new IOMMU_CAP_PCI_ATS_SUPPORTED capability to allow IOMMU drivers
to report the effective ATS decision for a device.
When this capability is true for a device, ATS may be enabled for that
device, but it does not imply that ATS is currently enabled.
A subsequent patch will extend iommufd to expose the effective ATS
status to userspace.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Previously, commit 8388f7df936b ("iommu/amd: Do not support
IOMMU_DOMAIN_IDENTITY after SNP is enabled") prevented users from
changing the IOMMU domain to identity if SNP was enabled.
This resulted in an error when writing to sysfs:
# echo "identity" > /sys/kernel/iommu_groups/50/type
-bash: echo: write error: Cannot allocate memory
However, commit 4402f2627d30 ("iommu/amd: Implement global identity
domain") changed the flow of the code, skipping the SNP guard and
allowing users to change the IOMMU domain to identity after a machine
has booted.
Once the user does that, they will probably try to bind and the
device/driver will start to do DMA which will trigger errors:
iommu ivhd3: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:43:00.0 pasid=0x00000 address=0x3737b01000 flags=0x0020]
iommu ivhd3: AMD-Vi: Control Reg : 0xc22000142148d
AMD-Vi: DTE[0]: 6000000000000003
AMD-Vi: DTE[1]: 0000000000000001
AMD-Vi: DTE[2]: 2000003088b3e013
AMD-Vi: DTE[3]: 0000000000000000
bnxt_en 0000:43:00.0 (unnamed net_device) (uninitialized): Error (timeout: 500015) msg {0x0 0x0} len:0
iommu ivhd3: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:43:00.0 pasid=0x00000 address=0x3737b01000 flags=0x0020]
iommu ivhd3: AMD-Vi: Control Reg : 0xc22000142148d
AMD-Vi: DTE[0]: 6000000000000003
AMD-Vi: DTE[1]: 0000000000000001
AMD-Vi: DTE[2]: 2000003088b3e013
AMD-Vi: DTE[3]: 0000000000000000
bnxt_en 0000:43:00.0: probe with driver bnxt_en failed with error -16
To prevent this from happening, create an attach wrapper for
identity_domain_ops which returns EINVAL if amd_iommu_snp_en is true.
With this commit applied:
# echo "identity" > /sys/kernel/iommu_groups/62/type
-bash: echo: write error: Invalid argument
Fixes: 4402f2627d30 ("iommu/amd: Implement global identity domain")
Signed-off-by: Joe Damato <joe@dama.to>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
domain->mm->iommu_mm can be freed by iommu_domain_free():
iommu_domain_free()
mmdrop()
__mmdrop()
mm_pasid_drop()
After iommu_domain_free() returns, accessing domain->mm->iommu_mm may
dereference a freed mm structure, leading to a crash.
Fix this by moving the code that accesses domain->mm->iommu_mm to before
the call to iommu_domain_free().
Fixes: e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Avoid kernel-doc warnings in io-pgtable.h:
- use the correct struct member names or kernel-doc format
- add a missing struct member description
- add a missing function return comment section
Warning: include/linux/io-pgtable.h:187 struct member 'coherent_walk' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_lpae_s1_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_lpae_s2_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_v7s_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_mali_lpae_cfg'
not described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'apple_dart_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'amd' not described
in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:223 struct member
'read_and_clear_dirty' not described in 'io_pgtable_ops'
Warning: include/linux/io-pgtable.h:237 No description found for return
value of 'alloc_io_pgtable_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Currently the core code provides a simplified interface to drivers where
it fragments a requested multi-page map into single page size steps after
doing all the calculations to figure out what page size is
appropriate. Each step rewalks the page tables from the start.
Since iommupt has a single implementation of the mapping algorithm it can
internally compute each step as it goes while retaining its current
position in the walk.
Add a new function pt_pgsz_count() which computes the same page size
fragement of a large mapping operations.
Compute the next fragment when all the leaf entries of the current
fragement have been written, then continue walking from the current
point.
The function pointer is run through pt_iommu_ops instead of
iommu_domain_ops to discourage using it outside iommupt. All drivers with
their own page tables should continue to use the simplified map_pages()
style interfaces.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The common algorithm in iommupt does not require the iommu_pgsize()
calculations, it can directly unmap any arbitrary range. Add a new function
pointer to directly call an iommupt unmap_range op and make
__iommu_unmap() call it directly.
Gives about a 5% gain on single page unmappings.
The function pointer is run through pt_iommu_ops instead of
iommu_domain_ops to discourage using it outside iommupt. All drivers with
their own page tables should continue to use the simplified
map/unmap_pages() style interfaces.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The cmdq wait loop busy-polls the consumer index until it advances
or the software timeout expires. If the IOMMU has already signaled
a command queue failure in CQCSR, continuing to poll for progress is
pointless.
Make riscv_iommu_queue_wait() also terminate the poll when any of these
CQCSR error bits are observed.
This helps the caller return earlier in failure cases and avoids
spinning until the full timeout interval when the hardware has already
reported an error. On single-core systems in particular, the current
busy-wait can delay servicing the command-timeout interrupt until the
software timeout expires (90s by default).
Fixes: 856c0cfe5c5f ("iommu/riscv: Command and fault queue support")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants
Reported-by: syzbot+48dc1e8dfc92faf1124c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48dc1e8dfc92faf1124c
Fixes: e58ba4544c77 ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Link: https://patch.msgid.link/20260313141643.1181386-1-zlatistiv@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 789a5913b29c ("iommu/amd: Use the generic iommu page table")
introduces the shared iommu page table for AMD IOMMU. Some bioses
contain an identity mapping for address 0x0, which is not parsed
properly (e.g., certain Strix Halo devices). This causes the DMA
components of the device to fail to initialize (e.g., the NVMe SSD
controller), leading to a failed post.
Specifically, on the GPD Win 5, the NVME and SSD GPU fail to mount,
making collecting errors difficult. While debugging, it was found that
a -EADDRINUSE error was emitted and its source was traced to
iommu_iova_to_phys(). After adding some debug prints, it was found that
phys_addr becomes 0, which causes the code to try to re-map the 0
address and fail, causing a cascade leading to a failed post. This is
because the GPD Win 5 contains a 0x0-0x1 identity mapping for DMA
devices, causing it to be repeated for each device.
The cause of this failure is the following check in
iommu_create_device_direct_mappings(), where address aliasing is handled
via the following check:
```
phys_addr = iommu_iova_to_phys(domain, addr);
if (!phys_addr) {
map_size += pg_size;
continue;
}
````
Obviously, the iommu_iova_to_phys() signature is faulty and aliases
unmapped and 0 together, causing the allocation code to try to
re-allocate the 0 address per device. However, it has too many
instantiations to fix. Therefore, use a ternary so that when addr
is 0, the check is done for address 1 instead.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Fixes: 789a5913b29c ("iommu/amd: Use the generic iommu page table")
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Charles Perry says:
====================
Initial support for PIC64-HPSC/HX Ethernet endpoint
This series add basic support for Microchip "PIC64-HPSC" and "PIC64HX"
Ethernet endpoint. Both SoCs contain 4 GEM IP with support for
MII/RGMII/SGMII/USXGMII at rates of 10M to 10G. Only RGMII and SGMII at a
rate of 1G is tested for now. Each GEM IP has 8 priority queues and the
revision register reads 0x220c010e.
One particularity of this instantiation of GEM is that the MDIO controller
within the GEM IP is disconnected from any physical pin and the SoC rely on
another standalone MDIO controller.
The maximum jumbo frame size also seems to be different on PIC64-HPSC/HX
(16383) than what most other platforms use (10240). I've found that I need
to tweak a bit the MTU calculation for this, otherwise the RXBS field of
the DMACFG register overflows. See patch 2 for more details.
PIC64-HPSC/HX also supports other features guarded behind CAPS bit like
MACB_CAPS_QBV but I've omitted those intentionally because I didn't test
these.
====================
Link: https://patch.msgid.link/20260313140610.3681752-1-charles.perry@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pic64hpsc doesn't have the USRIO register so MACB_CAPS_USRIO_DISABLED is
used.
pic64hpsc does support PTP and has the timestamping unit so
MACB_CAPS_GEM_HAS_PTP is used.
jumbo_max_len is set to 16383 (0x3FFF) as reported by the DCFG2 register
bits 0..13. The JML register also has a default value of 0x3FFF.
dma_burst_length is set to 16 because that's what most other platforms
use and it worked for me so far. There is one other mode where bursts of
up to 256 are allowed but this might impact negatively other masters on
the NOC. The register default value is 4 (bursts up to 4).
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313140610.3681752-4-charles.perry@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The RX buffers for GEM can have a maximum size of 16320 bytes
(0xff in the RXBS field of the DMACFG register means 255*64 =
16320 bytes).
The GEM IP has configurable maximum jumbo frame length that can go up to
16383. The actual value for this limit can be found in the
"jumbo_max_length" field (bits 0..13) of the DCFG2 register.
Currently, the macb driver doesn't use the DCFG2 register when
determining the max MTU, instead an hardcoded value (jumbo_max_len in
struct macb_config) is used for each platform. Right now the maximum
value for jumbo_max_len is 10240 (0x2800).
GEM uses one buffer per packet which means that one buffer must allow
room for the max MTU plus L2 encapsulation and alignment. This is a
limitation of the driver.
This commit adds a limit to max_mtu and rx_buffer_size so that the RXBS
field can never overflow when a large MTU is used.
With this commit, it is now possible to add new platforms with a
jumbo_max_len of 16383 so that the hardware properties of each IP can be
properly captured in struct macb_config.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313140610.3681752-3-charles.perry@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add "microchip,pic64hpsc-gem" for "PIC64-HPSC" and
"microchip,pic64hx-gem" for "PIC64HX", compatible with the former.
The generic compatible "cdns,gem" works but offers limited features.
Keep it as a fallback.
The GEM IPs within pic64hpsc have their MDIO controllers unconnected
from any physical pin. Add a check to prevent adding PHYs under the GEM
node.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260313140610.3681752-2-charles.perry@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a compatible string for SPDIF on RK3576, which is similar to the
one on RK3568.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260316-rk3576-spdif-v1-1-acb75088b560@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When iova_domain_init_rcaches() fails to allocate an iova_magazine
during the initialization of per-cpu rcaches, it jumps to out_err and
calls free_iova_rcaches() for cleanup.
In free_iova_rcaches(), the code iterates through all possible CPUs to
free both cpu_rcache->loaded and cpu_rcache->prev. However, if the
original allocation failed mid-way through the CPU loop, the pointers
for the remaining CPUs remain NULL.
Since kmem_cache_free() does not explicitly handle NULL pointers like
kfree() does, passing these NULL pointers leads to a kernel paging
request fault.
Add a NULL check in iova_magazine_free() to safely handle partially
initialized rcaches in error paths.
Signed-off-by: lynn <liulynn@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Currently, PPR Log and GA logs for AMD IOMMU are allocated using
iommu_alloc_pages_sz(), which does not account for NUMA affinity. This can
lead to remote memory access latencies if the memory is allocated on a
different node than the IOMMU hardware.
Switch to iommu_alloc_pages_node_sz() to ensure that these data structures
are allocated on the same NUMA node as the IOMMU device. If the node
information is unavailable, it defaults to NUMA_NO_NODE.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
In intel_svm_set_dev_pasid(), the driver unconditionally manages the IOPF
handling during a domain transition. However, commit a86fb7717320
("iommu/vt-d: Allow SVA with device-specific IOPF") introduced support for
SVA on devices that handle page faults internally without utilizing the
PCI PRI. On such devices, the IOMMU-side IOPF infrastructure is not
required. Calling iopf_for_domain_replace() on these devices is incorrect
and can lead to unexpected failures during PASID attachment or unwinding.
Add a check for info->pri_supported to ensure that the IOPF queue logic
is only invoked for devices that actually rely on the IOMMU's PRI-based
fault handling.
Fixes: 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20260310075520.295104-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
During the qi_check_fault process after an IOMMU ITE event, requests at
odd-numbered positions in the queue are set to QI_ABORT, only satisfying
single-request submissions. However, qi_submit_sync now supports multiple
simultaneous submissions, and can't guarantee that the wait_desc will be
at an odd-numbered position. Therefore, if an item times out, IOMMU can't
re-initiate the request, resulting in an infinite polling wait.
This modifies the process by setting the status of all requests already
fetched by IOMMU and recorded as QI_IN_USE status (including wait_desc
requests) to QI_ABORT, thus enabling multiple requests to be resubmitted.
Fixes: 8a1d82462540 ("iommu/vt-d: Multiple descriptors per qi_submit_sync()")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://lore.kernel.org/r/20260306101516.3885775-1-guanghuifeng@linux.alibaba.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: 8a1d82462540 ("iommu/vt-d: Multiple descriptors per qi_submit_sync()")
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
In PT_FEAT_FLUSH_RANGE mode the gather was accumulated but never flushed
and then the accumulated range was discarded by the dma-iommu code in
DMA-FQ mode. This is basically optimal.
However for PT_FEAT_FLUSH_RANGE_NO_GAPS the page table would push flushes
that are redundant with the flush all generated by the DMA-FQ mode.
Disable all range accumulation in the gather, and iommu_pt triggered
flushing when in iommu_iotlb_gather_queued() indicates it is in DMA-FQ
mode.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Closes: https://lore.kernel.org/r/794b6121-b66b-4819-b291-9761ed21cd83@arm.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This driver used to use a lot of page table constants from the architecture
code which prevented COMPILE_TEST on other architectures. Now that iommupt
provides all of the constants internally there are only two small bumps
preventing COMPILE_TEST.
- Use the generic functions for the riscv specific phys_to_pfn() and
pfn_to_phys()
- Use CONFIG_MMIOWB to block off the mmiowb() barrier
- Require 64 bit because of writeq use failing compilation on 32 bit
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Tested-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The commit below added MSI related calls to the driver that depends on
GENERIC_MSI_IRQ. It is possible to build RISC-V without this selected.
This is also necessary to make the driver COMPILE_TEST.
Fixes: d5f88acdd6ff ("iommu/riscv: Add support for platform msi")
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Tested-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This turns on a 64k page size. The "RISC-V IOMMU Architecture
Specification" states:
6.4 IOMMU capabilities
[..]
IOMMU implementations must support the Svnapot standard extension for
NAPOT Translation Contiguity.
So just switch it on unconditionally.
Cc: Xu Lu <luxu.kernel@bytedance.com>
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Tested-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This is a fairly straightforward conversion of the RISC-V iommu driver to
use the generic iommu page table code.
Invalidation stays as it is now with the driver pretending to implement
simple range based invalidation even though the HW is more like ARM SMMUv3
than AMD where the HW implements a single-PTE based invalidation. Future
work to extend the generic invalidate mechanism to support more ARM-like
semantics would benefit this driver as well.
Delete the existing page table code.
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Tested-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
In terms of the iommu subystem the SADE/GADE feature "3.4. IOMMU updating
of PTE accessed (A) and dirty (D) updates" is called dirty tracking.
There is no reason to enable HW support for this, and the HW cost
associated with it, unless dirty tracking is actually enabled through
iommufd. It should be a dynamic feature linked to user request.
Further, without implementing the read dirty ops the whole thing is
pointless.
Do not set DC.tc.SADE just because the HW has support for dirty tracking.
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Tested-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The RISC-V format is a fairly simple 5 level page table not unlike the x86
one. It has optional support for a single contiguous page size of 64k (16
x 4k).
The specification describes a 32-bit format, the general code can support
it via a #define but the iommu side implementation has been left off until
a user comes.
Tested-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Tested-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
In RISC-V IOMMU platform devices that use MSI interrupts (indicated by the
presence of 'msi-parent' in the device tree), there are no wired interrupt
lines, so calling platform_get_irq_count() returns 0 or -ENXIO, causing the
driver to fail during probe.
However, MSI interrupts are allocated dynamically via the MSI subsystem and
do not appear in the device tree 'interrupts' property. Therefore, the
driver should not require a non-zero IRQ count when 'msi-parent' is present.
This patch fixes the bug where probe fails when using MSI interrupts
(which do not have an 'interrupts' property in the device tree)..
Fixes: <d5f88acdd6ff> ("iommu/riscv: Add support for platform msi")
Signed-off-by: Yaxing Guo <guoyaxing@bosc.ac.cn>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache
invalidations after updating DDT or PDT entries, as mandated by the RISC-V
IOMMU specification (Section 6.3.1 and 6.3.2).
Fixes: 488ffbf18171 ("iommu/riscv: Paging domain support")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v7.0-rc5
This includes a single fix that reverses the check for return value of
device_property_read_u8() during the driver load.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.0-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix property read in nhi_wake_supported()
|
