| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid unclocked register access and unbalanced
clock disable.
Also restore the autosuspend setting.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix.
Fixes: d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation")
Cc: stable@vger.kernel.org # 4.7
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://sashiko.dev/#/patchset/20260414134319.978196-1-johan%40kernel.org?part=1
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421123615.1533617-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable AUX PA sequencing during AUX DAC DAPM events and keep the
AUX-specific RX supplies enabled while the path is active.
Add the missing AUX-related mixer controls, including CLSH PA and
DSD left/right switches, so AUX playback can be routed from userspace.
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420180221.785113-1-ajay.nandam@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
kconfiglint reports two warnings for sound/soc/tegra/Makefile:
M002: composite module 'snd-soc-tegra-utils' defined but not in any obj-*
M008: composite module 'snd-soc-tegra-utils': tegra_asoc_utils.o has no
source file
The composite module definition
`snd-soc-tegra-utils-y += tegra_asoc_utils.o` references a source file that
no longer exists and defines a module that is never included in any obj-*
target.
The tegra_asoc_utils module was originally introduced in commit
a3cd50deef7b ("ASoC: Tegra: Move utilities to separate module") by Stephen
Warren in 2011 to provide shared clock/rate utility functions for Tegra
machine drivers. At that time, the Makefile had both the composite
definition (`snd-soc-tegra-utils-objs`) and the build target
(`obj-$(CONFIG_SND_TEGRA_SOC) += snd-soc-tegra-utils.o`).
In 2021,
commit 8c1b3b159300 ("ASoC: tegra: Squash utils into common machine
driver")
by Dmitry Osipenko merged tegra_asoc_utils.c into tegra_asoc_machine.c,
deleting both the .c and .h files. That commit correctly removed the obj-*
build target line but overlooked the composite module definition line
(`snd-soc-tegra-utils-objs += tegra_asoc_utils.o`).
The orphaned line persisted unnoticed and was even mechanically updated in
2024 by
commit 51a50d6ad727 ("ASoC: tegra: Use *-y instead of *-objs in
Makefile")
by Takashi Iwai, which converted it from `-objs` to `-y` syntax as part of
a treewide cleanup — inadvertently refreshing a stale definition.
Remove the orphaned composite module definition since it serves no purpose:
the source file was deleted, the obj-* target was already removed, and the
functionality now lives in tegra_asoc_machine.c.
Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://patch.msgid.link/20260426000249.54799-1-sashal@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The order of operations to derive the temperature from the temp
register values was wrong, since 1000 / 16 is not an integer. This
resulted in the calculated temperature value deviating from the
value represented by the registers slightly, which was most obvious
when the registers were zeroed (-92.265 *C vs the expected -93.000 *C).
Scale the reading before dividing the whole thing by 16 to correct
this.
Fixes: ff73e2780169 ("ASoC: tas2770: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260425-tas27xx-hwmon-fixes-v1-3-83c13b8e8f54@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reading the temperature register always returns the first value
read from the chip due to regcache.
Mark TAS2764_TEMP as volatile to prevent returning stale, cached
values when reading the die temp.
Fixes: 186dfc85f9a8 ("ASoC: tas2764: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260425-tas27xx-hwmon-fixes-v1-1-83c13b8e8f54@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Two CTRLR0 macros are defined but never referenced, and both are wrong:
- CR0_XFM_MASK shifts by SPI_XFM_OFFSET, which does not exist anywhere
in the tree. The intended symbol is CR0_XFM_OFFSET.
- CR0_MTM_OFFSET is defined as 0x21, i.e. bit 33 of a 32-bit register.
The value is meaningless and the macro is unused.
Drop both. They can be re-introduced correctly when an actual user
appears.
Signed-off-by: John Madieu <john.madieu@gmail.com>
Link: https://patch.msgid.link/20260425092936.2590132-3-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rockchip_spi_isr() decides whether the current interrupt was the
cs-inactive event by reading IMR:
if (rs->cs_inactive &&
readl_relaxed(rs->regs + ROCKCHIP_SPI_IMR) & INT_CS_INACTIVE)
ctlr->target_abort(ctlr);
IMR is the interrupt mask register: it tells which sources are enabled,
not which one fired. In the PIO path, rockchip_spi_prepare_irq() enables
both INT_RF_FULL and INT_CS_INACTIVE in IMR when rs->cs_inactive is true:
if (rs->cs_inactive)
writel_relaxed(INT_RF_FULL | INT_CS_INACTIVE,
rs->regs + ROCKCHIP_SPI_IMR);
so the IMR check is always true once cs_inactive is enabled, and every
PIO interrupt - including normal RF_FULL completions - is dispatched to
ctlr->target_abort(), aborting the transfer. The bug is reachable on
ROCKCHIP_SPI_VER2_TYPE2 in target mode with a DMA-capable controller
when the transfer is short enough to fall back to PIO
(rockchip_spi_can_dma() returns false below fifo_len).
Read ISR (which is RISR masked by IMR) so the check actually reflects
which interrupt fired, and parenthesise the expression for clarity while
at it.
Fixes: 869f2c94db92 ("spi: rockchip: Stop spi slave dma receiver when cs inactive")
Signed-off-by: John Madieu <john.madieu@gmail.com>
Link: https://patch.msgid.link/20260425092936.2590132-2-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An empty adr_link is expected to terminate the
for (adr_link = mach_params->links; adr_link->num_adr; adr_link++) loop.
Allocate link_num + 1 links to add an empty adr_link.
Fixes: 5226d19d4cae5 ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260424105031.114053-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 671dd2ffbd8b ("ASoC: amd: acp: Add new cpu dai and dailink creation for I2S BT instance")
introduced a change that "broke" Steam Deck's audio probe, in the OLED
model, as observed in the following dmesg snippet:
[...]
snd_sof_amd_vangogh 0000:04:00.5: Topology: ABI 3:26:0 Kernel ABI 3:23:1
sof_mach nau8821-max: ASoC: physical link acp-bt-codec (id 2) not exist
sof_mach nau8821-max: ASoC: topology: could not load header: -22
snd_sof_amd_vangogh 0000:04:00.5: tplg amd/sof-tplg/sof-vangogh-nau8821-max.tplg component load failed -22
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP topology -22
snd_sof_amd_vangogh 0000:04:00.5: ASoC error (-22): at snd_soc_component_probe() on 0000:04:00.5
sof_mach nau8821-max: ASoC: failed to instantiate card -22
sof_mach nau8821-max: error -EINVAL: Failed to register card(sof-nau8821-max)
sof_mach nau8821-max: probe with driver sof_mach failed with error -22
[...]
Notice the quotes in "broke": it's not really a bug in such commit,
but instead a problem with a topology file from Steam Deck OLED. This
was discussed to great extent in [1], and Cristian proposed a pretty
simple and functional change that resolved the issue for the Deck's
issue. That change, though, would break other devices, so it wasn't
accepted upstream. And the proper suggested solution (fix the topology)
was never implemented, so Valve's kernel (and anyone that wants to boot
the mainline on Steam Deck OLED) is carrying that fix downstream.
So, we propose hereby a different approach: a DMI quirk, as many already
present in the sound drivers, to address this issue solely on Steam Deck
OLED, not breaking other devices and as a bonus, allowing simple patch
up in case eventually the topology file gets fixed (we'd just need to
check against any DMI info reflecting that or the topology/FW versions).
The motivation of such upstream quirk is related to users that want
to test latest kernel trees on their devices and get no only non-working
sound device, but seems some games (like Ori and the Blind Forest)
can't properly work without a proper functional audio device.
Example of such report can be seen at [2].
Cc: Mark Brown <broonie@kernel.org>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Umang Jain <uajain@igalia.com>
Fixes: 671dd2ffbd8b ("ASoC: amd: acp: Add new cpu dai and dailink creation for I2S BT instance")
Link: https://lore.kernel.org/r/20231209205351.880797-11-cristian.ciocaltea@collabora.com/ [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218677 [2]
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://patch.msgid.link/20260423183505.116445-1-gpiccoli@igalia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260424112425.32129-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rzv2h_rspi_setup_clock() is declared to return u32 but returns -EINVAL
when no valid clock parameters are found. Cast to u32, -EINVAL becomes
0xffffffea, which is a non-zero value. The caller in
rzv2h_rspi_prepare_message() guards against failure with:
rspi->freq = rzv2h_rspi_setup_clock(rspi, speed_hz);
if (!rspi->freq)
return -EINVAL;
Because 0xffffffea is non-zero, the check is bypassed and the controller
proceeds to program SPBR/SPCMD with stale values, leading to an unknown
bit rate.
Return 0 on the failed-search path, consistent with the existing
clk_set_rate() failure path which already returns 0.
Fixes: 77d931584dd3 ("spi: rzv2h-rspi: make transfer clock rate finding chip-specific")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20260425024725.2393632-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull power utility updates from Len Brown:
"x86_energy_perf_policy:
- Initial SoC Slider support
turbostat:
- Display HT siblings in cpu# order
- Add Module-ID column
- Print Core-ID and APIC-ID in hex
- Fix misc bugs"
* tag 'power-utilities-2026.04.25' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power x86_energy_perf_policy: Version 2026.04.25
tools/power x86_energy_perf_policy.8: Document SoC Slider Options
tools/power x86_energy_perf_policy: Enhances SoC Slider related checks
tools/power turbostat: v2026.04.21
tools/power turbostat: Process HT siblings in CPU order
tools/power turbostat: Show module_id column
tools/power turbostat: Print core_id and apic_id in hex
tools/power turbostat: Cleanup print helper functions
tools/power turbostat: Fix --cpu-set 1 regression on HT systems
tools/power turbostat: Fix --cpu-set 0 regression on HT systems
tools/power turbostat: Fix unrecognized option '-P'
tools/power turbostat: Fix AMD RAPL regression on big systems
tools/power/x86: Add SOC slider and platform profile support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
|
|
|
|
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736af6 ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- request memory region before use (cobalt_lcdfb, clps711x-fb, hgafb)
- reference cleanups in failure path (offb, savage)
- a spelling fix (atyfb)
* tag 'fbdev-for-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: hgafb: Request memory region before ioremap
fbdev: clps711x-fb: Request memory region for MMIO
fbdev: cobalt_lcdfb: Request memory region
fbdev: atyfb: Fix spelling mistake "enfore" -> "enforce"
fbdev: savage: fix probe-path EDID cleanup leaks
fbdev: offb: fix PCI device reference leak on probe failure
|
|
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
|
|
scx_root_enable_workfn() takes cpus_read_lock() before
scx_link_sched(sch), but the `if (ret) goto err_disable` on failure
skips the matching cpus_read_unlock() - all other err_disable gotos
along this path drop the lock first.
scx_link_sched() only returns non-zero on the sub-sched path
(parent != NULL), so the leak path is unreachable via the root
caller today. Still, the unwind is out of line with the surrounding
paths.
Drop cpus_read_lock() before goto err_disable.
v2: Correct Fixes: tag (Andrea Righi).
Fixes: 25037af712eb ("sched_ext: Add rhashtable lookup for sub-schedulers")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_prog_sched(aux) returns NULL for TRACING / SYSCALL BPF progs that
have no struct_ops association when the root scheduler has sub_attach
set. scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() pass
that NULL into scx_task_on_sched(sch, p), which under
CONFIG_EXT_SUB_SCHED is rcu_access_pointer(p->scx.sched) == sch. For
any non-scx task p->scx.sched is NULL, so NULL == NULL returns true
and the authority gate is bypassed - a privileged but
non-struct_ops-associated prog can poke p->scx.slice /
p->scx.dsq_vtime on arbitrary tasks.
Reject !sch up front so the gate only admits callers with a resolved
scheduler.
Fixes: 245d09c594ea ("sched_ext: Enforce scheduler ownership when updating slice and dsq_vtime")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
select_cpu_from_kfunc() skipped pi_lock for @p when called from
ops.select_cpu() or another rq-locked SCX op, assuming the held lock
protects @p. scx_bpf_select_cpu_dfl() / __scx_bpf_select_cpu_and() accept an
arbitrary KF_RCU task_struct, so a caller in e.g. ops.select_cpu(p1) or
ops.enqueue(p1) can pass some other p2 - the held pi_lock / rq lock is p1's,
not p2's - and reading p2->cpus_ptr / nr_cpus_allowed races with
set_cpus_allowed_ptr() and migrate_disable_switch() on another CPU.
Abort the scheduler on cross-task calls in both branches: for
ops.select_cpu() use scx_kf_arg_task_ok() to verify @p is the wake-up
task recorded in current->scx.kf_tasks[] by SCX_CALL_OP_TASK_RET();
for other rq-locked SCX ops compare task_rq(p) against scx_locked_rq().
v2: Switch the in_select_cpu cross-task check from direct_dispatch_task
comparison to scx_kf_arg_task_ok(). The former spuriously rejects when
ops.select_cpu() calls scx_bpf_dsq_insert() first, then calls
scx_bpf_select_cpu_*() on the same task. (Andrea Righi)
Fixes: 0022b328504d ("sched_ext: Decouple kfunc unlocked-context check from kf_mask")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrea Righi <arighi@nvidia.com>
|
|
Two EXT_GROUP_SCHED/SUB_SCHED guards are misclassified:
- scx_root_enable_workfn()'s cgroup_get(cgrp) and the err_put_cgrp unwind
in scx_alloc_and_add_sched() are under `#if GROUP || SUB`, but the
matching cgroup_put() in scx_sched_free_rcu_work() is inside `#ifdef SUB`
only (via sch->cgrp, stored only under SUB). GROUP-only would leak a
reference on every root-sched enable.
- sch_cgroup() / set_cgroup_sched() live under `#if GROUP || SUB` but touch
SUB-only fields (sch->cgrp, cgroup->scx_sched). GROUP-only wouldn't
compile.
GROUP needs CGROUP_SCHED; SUB needs only CGROUPS. CGROUPS=y/CGROUP_SCHED=n
gives the reachable GROUP=n, SUB=y combination; GROUP=y, SUB=n isn't
reachable today (SUB is def_bool y under CGROUPS). Neither miscategorization
triggers a real bug in any reachable config, but keep the guards honest:
- Narrow cgroup_get and err_put_cgrp to `#ifdef SUB` (matches the free-side
put).
- Move sch_cgroup() and set_cgroup_sched() to a separate `#ifdef SUB` block
with no-op stubs for the !SUB case; keep root_cgroup() and scx_cgroup_{
lock,unlock}() under `#if GROUP || SUB` since those only need cgroup core.
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_bypass_lb_{donee,resched}_cpumask were file-scope statics shared by all
scheduler instances. With CONFIG_EXT_SUB_SCHED, multiple sched instances
each arm their own bypass_lb_timer; concurrent bypass_lb_node() calls RMW
the global cpumasks with no lock, corrupting donee/resched decisions.
Move the cpumasks into struct scx_sched, allocate them alongside the timer
in scx_alloc_and_add_sched(), free them in scx_sched_free_rcu_work().
Fixes: 95d1df610cdc ("sched_ext: Implement load balancer for bypass mode")
Cc: stable@vger.kernel.org # v6.19+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_prio_less() runs from core-sched's pick_next_task() path with rq
locked but invokes ops.core_sched_before() with NULL locked_rq, leaving
scx_locked_rq_state NULL. If the BPF callback calls a kfunc that
re-acquires rq based on scx_locked_rq() - e.g. scx_bpf_cpuperf_set(cpu)
- it re-acquires the already-held rq.
Pass task_rq(a).
Fixes: 7b0888b7cc19 ("sched_ext: Implement core-sched support")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_dump_state() walks CPUs with rq_lock_irqsave() held and invokes
ops.dump_cpu / ops.dump_task with NULL locked_rq, leaving
scx_locked_rq_state NULL. If the BPF callback calls a kfunc that
re-acquires rq based on scx_locked_rq() - e.g. scx_bpf_cpuperf_set(cpu)
- it re-acquires the already-held rq.
Pass the held rq to SCX_CALL_OP(). Thread it into scx_dump_task() too.
The pre-loop ops.dump call runs before rq_lock_irqsave() so keeps
rq=NULL.
Fixes: 07814a9439a3 ("sched_ext: Print debug dump after an error exit")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
SCX_CALL_OP{,_RET}() unconditionally clears scx_locked_rq_state to NULL on
exit. Correct at the top level, but ops can recurse via
scx_bpf_sub_dispatch(): a parent's ops.dispatch calls the helper, which
invokes the child's ops.dispatch under another SCX_CALL_OP. When the inner
call returns, the NULL clobbers the outer's state. The parent's BPF then
calls kfuncs like scx_bpf_cpuperf_set() which read scx_locked_rq()==NULL and
re-acquire the already-held rq.
Snapshot scx_locked_rq_state on entry and restore on exit. Rename the rq
parameter to locked_rq across all SCX_CALL_OP* macros so the snapshot local
can be typed as 'struct rq *' without colliding with the parameter token in
the expansion. SCX_CALL_OP_TASK{,_RET}() and SCX_CALL_OP_2TASKS_RET() funnel
through the two base macros and inherit the fix.
Fixes: 4f8b122848db ("sched_ext: Add basic building blocks for nested sub-scheduler dispatching")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
FIFO-tail
dispatch_enqueue()'s FIFO-tail path used list_empty(&dsq->list) to decide
whether to set dsq->first_task on enqueue. dsq->list can contain parked BPF
iterator cursors (SCX_DSQ_LNODE_ITER_CURSOR), so list_empty() is not a
reliable "no real task" check. If the last real task is unlinked while a
cursor is parked, first_task becomes NULL; the next FIFO-tail enqueue then
sees list_empty() == false and skips the first_task update, leaving
scx_bpf_dsq_peek() returning NULL for a non-empty DSQ.
Test dsq->first_task directly, which already tracks only real tasks and is
maintained under dsq->lock.
Fixes: 44f5c8ec5b9a ("sched_ext: Add lockless peek operation for DSQs")
Cc: stable@vger.kernel.org # v6.19+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cc: Ryan Newton <newton@meta.com>
|
|
scx_bpf_dsq_nr_queued()
scx_bpf_create_dsq() resolves the calling scheduler via scx_prog_sched(aux)
and inserts the new DSQ into that scheduler's dsq_hash. Its inverse
scx_bpf_destroy_dsq() and the query helper scx_bpf_dsq_nr_queued() were
hard-coded to rcu_dereference(scx_root), so a sub-scheduler could only
destroy or query DSQs in the root scheduler's hash - never its own. If the
root had a DSQ with the same id, the sub-sched silently destroyed it and the
root aborted on the next dispatch ("invalid DSQ ID 0x0..").
Take a const struct bpf_prog_aux *aux via KF_IMPLICIT_ARGS and resolve the
scheduler with scx_prog_sched(aux), matching scx_bpf_create_dsq().
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring
scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs.
If the loaded scheduler is disabled and freed (via RCU work) and another is
enabled between the naked load and the rwsem acquire, the reader sees
scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one
- UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...).
scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write
(scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section
correlates @sch with the enabled snapshot.
Fixes: a5bd6ba30b33 ("sched_ext: Use cgroup_lock/unlock() to synchronize against cgroup operations")
Cc: stable@vger.kernel.org # v6.18+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_sub_enable_workfn()'s prep loop calls __scx_init_task(sch, p, false)
without transitioning task state, then sets SCX_TASK_SUB_INIT. If prep fails
partway, the abort path runs __scx_disable_and_exit_task(sch, p) on the
marked tasks. Task state is still the parent's ENABLED, so that dispatches
to the SCX_TASK_ENABLED arm and calls scx_disable_task(sch, p) - i.e.
child->ops.disable() - for tasks on which child->ops.enable() never ran. A
BPF sub-scheduler allocating per-task state in enable/freeing in disable
would operate on uninitialized state.
The dying-task branch in scx_disable_and_exit_task() has the same problem,
and scx_enabling_sub_sched was cleared before the abort cleanup loop - a
task exiting during cleanup tripped the WARN and skipped both ops.exit_task
and the SCX_TASK_SUB_INIT clear, leaking per-task resources and leaving the
task stuck.
Introduce scx_sub_init_cancel_task() that calls ops.exit_task with
cancelled=true - matching what the top-level init path does when init_task
itself returns -errno. Use it in the abort loop and in the dying-task
branch. scx_enabling_sub_sched now stays set until the abort loop finishes
clearing SUB_INIT, so concurrent exits hitting the dying-task branch can
still find @sch. That branch also clears SCX_TASK_SUB_INIT unconditionally
when seen, leaving the task unmarked even if the WARN fires.
Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
bypass_lb_cpu() transfers tasks between per-CPU bypass DSQs without
migrating them - task_cpu() only updates when the donee later consumes the
task via move_remote_task_to_local_dsq(). If the LB timer fires again before
consumption and the new DSQ becomes a donor, @p is still on the previous CPU
and task_rq(@p) != donor_rq. @p can't be moved without its own rq locked.
Skip such tasks.
Fixes: 95d1df610cdc ("sched_ext: Implement load balancer for bypass mode")
Cc: stable@vger.kernel.org # v6.19+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
bpf_iter_scx_dsq_new() clears kit->dsq on failure and
bpf_iter_scx_dsq_{next,destroy}() guard against that. scx_dsq_move() doesn't -
it dereferences kit->dsq immediately, so a BPF program that calls
scx_bpf_dsq_move[_vtime]() after a failed iter_new oopses the kernel.
Return false if kit->dsq is NULL.
Fixes: 4c30f5ce4f7a ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
When ops.sub_attach is set, scx_alloc_and_add_sched() creates sub_kset as a
child of &sch->kobj, which pins the parent with its own reference. The
disable paths never call kset_unregister(), so the final kobject_put() in
bpf_scx_unreg() leaves a stale reference and scx_kobj_release() never runs,
leaking the whole struct scx_sched on every load/unload cycle.
Unregister sub_kset in scx_root_disable() and scx_sub_disable() before
kobject_del(&sch->kobj).
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
scx_hardlockup() runs from NMI and eventually calls scx_claim_exit(),
which takes scx_sched_lock. scx_sched_lock isn't NMI-safe and grabbing
it from NMI context can lead to deadlocks.
The hardlockup handler is best-effort recovery and the disable path it
triggers runs off of irq_work anyway. Move the handle_lockup() call into
an irq_work so it runs in IRQ context.
Fixes: ebeca1f930ea ("sched_ext: Introduce cgroup sub-sched support")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of the
saved ring buffer. This is because the ring buffer being read by user
space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other
accounting as well. On boot up, the "reader page" is accounted for
but a rewind may put it back into the buffer and then the reader page
may be accounted for again.
Save off the original reader page and skip accounting it when
scanning the pages in the ring buffer.
* tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not double count the reader_page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Series for zloop, fixing a variety of issues
- t10-pi code cleanup
- Fix for a merge window regression with the bio memory allocation mask
- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown
- ublk self tests additions
- Zoned device pgmap fixes
- Various little cleanups and fixes
* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a NOMMU bug with io_uring, where NOMMU doesn't grab page refs
at mmap time. NOMMU also has entirely broken FOLL_PIN support, yet
here we are
- A few fixes covering minor issues introduced in this merge window
- data race annotation to shut up KCSAN for when io-wq limits are
applied
- A nospec addition for direct descriptor file updating. Rest of the
direct descriptor path already had this, but for some reason the
update did not. Now they are all the same
- Various minor defensive changes that claude identified and suggested
terrible fixes for, turned into actually useful cleanups:
- Use kvfree() for the imu cache. These can come from kmalloc or
vmalloc depending on size, but the in-cache ones are capped
where it's always kmalloc based. Change to kvfree() in the
cleanup path, making future changes unlikely to mess that up
- Negative kbuf consumption lengths. Can't happen right now, but
cqe->res is used directly, which if other codes changes could
then be an error value
- Fix for an issue with the futex code, where partial wakes on a
vectored fuxes would potentially wake the same futex twice, rather
than move on to the next one. This could confuse an application as it
would've expected the next futex to have been woken
- Fix for a bug with ring resizing, where SQEs or CQEs might not have
been copied correctly if large SQEs or CQEs are used in the ring.
Application side issue, where SQEs or CQEs might have been lost
during resize
- Fix for a bug where EPOLL_URING_WAKE might have been lost, causing a
multishot poll to not be terminated when it's nested, like it should
have been
- Fix for an issue with signed comparison of poll references for the
slow path
- Fix for a user struct UAF in the zcrx code
- Two minor zcrx cleanups
* tag 'io_uring-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: take page references for NOMMU pbuf_ring mmaps
io_uring/poll: ensure EPOLL_ONESHOT is propagated for EPOLL_URING_WAKE
io_uring/zcrx: warn on freelist violations
io_uring/zcrx: clear RQ headers on init
io_uring/zcrx: fix user_struct uaf
io_uring/register: fix ring resizing with mixed/large SQEs/CQEs
io_uring/futex: ensure partial wakes are appropriately dequeued
io_uring/rw: add defensive hardening for negative kbuf lengths
io_uring/rsrc: use kvfree() for the imu cache
io_uring/rsrc: unify nospec indexing for direct descriptors
io_uring: fix spurious fput in registered ring path
io_uring: fix iowq_limits data race in tctx node addition
io_uring/tctx: mark io_wq as exiting before error path teardown
io_uring/tctx: check for setup tctx->io_wq before teardown
io_uring/poll: fix signed comparison in io_poll_get_ownership()
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix handling of ENOSPC so that if we have to resend writes, they
are written synchronously
- SUNRPC RDMA transport fixes from Chuck
- Several fixes for delegated timestamps in NFSv4.2
- Failure to obtain a directory delegation should not cause stat() to
fail with NFSv4
- Rename was failing to update timestamps when a directory delegation
is held on NFSv4
- Ensure we check rsize/wsize after crossing a NFSv4 filesystem
boundary
- NFSv4/pnfs:
- If the server is down, retry the layout returns on reboot
- Fallback to MDS could result in a short write being incorrectly
logged
Cleanups:
- Use memcpy_and_pad in decode_fh"
* tag 'nfs-for-7.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (21 commits)
NFS: Fix RCU dereference of cl_xprt in nfs_compare_super_address
NFS: remove redundant __private attribute from nfs_page_class
NFSv4.2: fix CLONE/COPY attrs in presence of delegated attributes
NFS: fix writeback in presence of errors
nfs: use memcpy_and_pad in decode_fh
NFSv4.1: Apply session size limits on clone path
NFSv4: retry GETATTR if GET_DIR_DELEGATION failed
NFS: fix RENAME attr in presence of directory delegations
pnfs/flexfiles: validate ds_versions_cnt is non-zero
NFS/blocklayout: print each device used for SCSI layouts
xprtrdma: Post receive buffers after RPC completion
xprtrdma: Scale receive batch size with credit window
xprtrdma: Replace rpcrdma_mr_seg with xdr_buf cursor
xprtrdma: Decouple frwr_wp_create from frwr_map
xprtrdma: Close lost-wakeup race in xprt_rdma_alloc_slot
xprtrdma: Avoid 250 ms delay on backlog wakeup
xprtrdma: Close sendctx get/put race that can block a transport
nfs: update inode ctime after removexattr operation
nfs: fix utimensat() for atime with delegated timestamps
NFS: improve "Server wrote zero bytes" error
...
|
|
Pull ceph updates from Ilya Dryomov:
"We have a series from Alex which extends CephFS client metrics with
support for per-subvolume data I/O performance and latency tracking
(metadata operations aren't included) and a good variety of fixes and
cleanups across RBD and CephFS"
* tag 'ceph-for-7.1-rc1' of https://github.com/ceph/ceph-client:
ceph: add subvolume metrics collection and reporting
ceph: parse subvolume_id from InodeStat v9 and store in inode
ceph: handle InodeStat v8 versioned field in reply parsing
libceph: Fix slab-out-of-bounds access in auth message processing
rbd: fix null-ptr-deref when device_add_disk() fails
crush: cleanup in crush_do_rule() method
ceph: clear s_cap_reconnect when ceph_pagelist_encode_32() fails
ceph: only d_add() negative dentries when they are unhashed
libceph: update outdated comment in ceph_sock_write_space()
libceph: Remove obsolete session key alignment logic
ceph: fix num_ops off-by-one when crypto allocation fails
libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs updates from Namjae Jeon:
- Fix potential data leakage by zeroing the portion of the straddle
block beyond initialized_size when reading non-resident attributes
- Remove unnecessary zeroing in ntfs_punch_hole() for ranges beyond
initialized_size, as they are already returned as zeros on read
- Fix writable check in ntfs_file_mmap_prepare() to correctly handle
shared mappings using VMA_SHARED_BIT | VMA_MAYWRITE_BIT
- Use page allocation instead of kmemdup() for IOMAP_INLINE data to
ensure page-aligned address and avoid BUG trap in
iomap_inline_data_valid() caused by the page boundary check
- Add a size check before memory allocation in ntfs_attr_readall() and
reject overly large attributes
- Remove unneeded noop_direct_IO from ntfs_aops as it is no longer
required following the FMODE_CAN_ODIRECT flag
- Fix seven static analysis warnings reported by Smatch
* tag 'ntfs-for-7.1-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: use page allocation for resident attribute inline data
ntfs: fix mmap_prepare writable check for shared mappings
ntfs: fix potential 32-bit truncation in ntfs_write_cb()
ntfs: fix uninitialized variable in ntfs_map_runlist_nolock
ntfs: delete dead code
ntfs: add missing error code in ntfs_mft_record_alloc()
ntfs: fix uninitialized variables in ntfs_ea_set_wsl_inode()
ntfs: fix uninitialized pointer in ntfs_write_mft_block
ntfs: fix uninitialized variable in ntfs_write_simple_iomap_begin_non_resident
ntfs: remove noop_direct_IO from address_space_operations
ntfs: limit memory allocation in ntfs_attr_readall
ntfs: not zero out range beyond init in punch_hole
ntfs: zero out stale data in straddle block beyond initialized_size
|
|
Pull 9p updates from Dominique Martinet:
- 9p access flag fix (cannot change access flag since new mount API implem)
- some minor cleanup
* tag '9p-for-7.1-rc1' of https://github.com/martinetd/linux:
9p/trans_xen: replace simple_strto* with kstrtouint
9p/trans_xen: make cleanup idempotent after dataring alloc errors
9p: document missing enum values in kernel-doc comments
9p: fix access mode flags being ORed instead of replaced
9p: fix memory leak in v9fs_init_fs_context error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX update from Greg KH:
"Here is a single SPDX-like change for 7.1-rc1. It explicitly allows
the use of SPDX-FileCopyrightText which has been used already in many
files.
At the same time, update checkpatch to catch any "non allowed" spdx
identifiers as we don't want to go overboard here.
This has been in linux-next for a long time with no reported problems"
* tag 'spdx-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES: Explicitly allow SPDX-FileCopyrightText
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
|
