| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- use flexible array member for hsi_port in hsi_controller
- misc small fixes
* tag 'hsi-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_port: remove depends on ARM
HSI: omap_ssi_port: remove set but unused variables
HSI: cmt_speech: fix wrong printf format
HSI: omap_ssi_port: remove null check from FAM
hsi: hsi_core: use kzalloc_flex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
"Core:
- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)
Drivers:
- support for rumble effects in winwing driver (Ivan Gorinov)
- new support for a variety of Sony Rock Band and Sony DJ Hero
Turntable devices (Rosalie Wanders)
- new driver for Lenovo Legion Go / S devices (Derek J. Clark)
- power management improvements to intel-thc-hid driver (Even Xu)
... other assorted cleanups, fixes and device-specific quirks"
* tag 'hid-for-linus-2026041601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (73 commits)
HID: core: clamp report_size in s32ton() to avoid undefined shift
HID: logitech-dj: fix wrong detection of bad DJ_SHORT output report
HID: logitech-hidpp: fix race condition when accessing stale stack pointer
HID: winwing: Enable rumble effects
HID: core: do not allow parsing 0-sized reports
HID: usbhid: refactor endpoint lookup
HID: huawei: fix CD30 keyboard report descriptor issue
HID: playstation: validate num_touch_reports in DualShock 4 reports
HID: drop 'default !EXPERT' from tristate symbols
HID: usbhid: fix deadlock in hid_post_reset()
HID: apple: ensure the keyboard backlight is off if suspending
HID: quirks: Set ALWAYS_POLL for LOGITECH_BOLT_RECEIVER
HID: alps: fix NULL pointer dereference in alps_raw_event()
HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
HID: logitech-dj: Standardise hid_report_enum variable nomenclature
HID: sony: update module description
HID: logitech-hidpp: Check bounds when deleting force-feedback effects
HID: sony: add battery status support for Rock Band 4 PS5 guitars
HID: sony: fix style issues
HID: quirks: update hid-sony supported devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New devm_of_dma_controller_register() API
New Support:
- Support for RZ/G3L SoC
- Loongson Multi-Channel DMA controller support
- Conversion of Xilinx AXI DMA binding
- DW AXI CV1800B DMA support
- Switchtec DMA engine driver
Updates:
- AMD MDB Endpoint and non-LL mode support
- DW edma virtual IRQ for interrupt-emulation, cyclic transfers support"
* tag 'dmaengine-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (65 commits)
dmaengine: dw-edma: Add non-LL mode
dmaengine: dw-edma: Add AMD MDB Endpoint Support
dt-bindings: dmaengine: Fix spelling mistake "Looongson" -> "Looogson"
dmaengine: loongson: Fix spelling mistake "Looongson" -> "Looogson"
dmaengine: loongson: New driver for the Loongson Multi-Channel DMA controller
dt-bindings: dmaengine: Add Loongson Multi-Channel DMA controller
dmaengine: loongson: loongson2-apb: Simplify locking with guard() and scoped_guard()
dmaengine: loongson: loongson2-apb: Convert to devm_clk_get_enabled()
dmaengine: loongson: loongson2-apb: Convert to dmaenginem_async_device_register()
dmaengine: loongson: New directory for Loongson DMA controllers drivers
dt-bindings: dma: xlnx,axi-dma: Convert to DT schema
dt-bindings: dma: rz-dmac: Add conditional schema for RZ/G3L
dmaengine: sh: rz-dmac: Add device_{pause,resume}() callbacks
dmaengine: sh: rz-dmac: Add device_tx_status() callback
dmaengine: sh: rz-dmac: Use rz_lmdesc_setup() to invalidate descriptors
dmaengine: sh: rz-dmac: Drop unnecessary local_irq_save() call
dmaengine: sh: rz-dmac: Drop goto instruction and label
dmaengine: sh: rz-dmac: Drop read of CHCTRL register
dmaengine: sh: rz_dmac: add RZ/{T2H,N2H} support
dt-bindings: dma: renesas,rz-dmac: document RZ/{T2H,N2H}
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Eliza QMP UFS PHY
- Canaan K230 USB 2.0 PHY driver
- Mediatek mt8167 dsi-phy
- Eswin EIC7700 SATA PHY driver
Updates:
- Sorted subsytem Makefile/Kconfig and some kernel-doc udpates"
* tag 'phy-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Eliza QMP UFS PHY
phy: qcom: m31-eusb2: clear PLL_EN during init
phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver
dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY
phy: apple: apple: Use local variable for ioremap return value
phy: qcom: qmp-usbc: Simplify check for non-NULL pointer
phy: marvell: mmp3-hsic: Avoid re-casting __iomem
phy: apple: atc: Make atcphy_dwc3_reset_ops variable static
dt-bindings: phy: mediatek,dsi-phy: Add support for mt8167
phy: usb: Add driver for Canaan K230 USB 2.0 PHY
dt-bindings: phy: Add Canaan K230 USB PHY
phy: phy-mtk-tphy: Update names and format of kernel-doc comments
phy: Sort the subsystem Kconfig
phy: Sort the subsystem Makefile
phy: move spacemit pcie driver to its subfolder
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core: DP prepare polling for avoiding interrupt deadlock
- AMD clock init and bandwidth refactoring
- Intel more codecs to wake list, clear message on before signaling
waiting thread
* tag 'soundwire-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_auxdevice: Add cs42l49 to wake_capable_list
soundwire: cadence: Clear message complete before signaling waiting thread
soundwire: Intel: test bus.bpt_stream before assigning it
soundwire: bus: demote UNATTACHED state warnings to dev_dbg()
soundwire: stream: Poll for DP prepare to avoid interrupt deadlock
soundwire: amd: refactor bandwidth calculation logic
soundwire: amd: add clock init control function
soundwire: intel_auxdevice: Add CS47L47 to wake_capable_list
soundwire: slave: Don't register devices that are disabled in ACPI
soundwire: sdw.h: repair names and format of kernel-doc comments
|
|
arena_alloc_pages() accepts a plain int node_id and forwards it through
the entire allocation chain without any bounds checking.
Validate node_id before passing it down the allocation chain in
arena_alloc_pages().
Fixes: 317460317a02 ("bpf: Introduce bpf_arena.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260417152135.1383754-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing latency update from Steven Rostedt:
- Add TIMERLAT_ALIGN osnoise option
Add a timer alignment option for timerlat that makes it work like the
cyclictest -A option. timelat creates threads to test the latency of
the kernel. The alignment option will have these threads trigger at
the alignment offsets from each other. Instead of having each thread
wake up at the exact same time, if the alignment is set to "20" each
thread will wake up at 20 microseconds from the previous one.
* tag 'trace-latency-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/osnoise: Add option to align tlat threads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fprobe update from Masami Hiramatsu:
- do not zero out unused fgraph_data. This removes unneeded memset of
fgraph_data in fprobe entry handler.
* tag 'probes-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: do not zero out unused fgraph_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
"Minor fixes for handling errors:
- fix off-by-one in xbc_verify_tree() next node check
- increment xbc_node_num after node init succeeds
- validate child node index in xbc_verify_tree()
Code cleanups (mainly type/attribute changes):
- clean up comment typos and bracing
- drop redundant memset of xbc_nodes
- replace linux/kernel.h with specific includes
- narrow flag parameter type from uint32_t to uint16_t
- constify xbc_calc_checksum() data parameter
- fix signed comparison in xbc_node_get_data()
- use size_t for strlen result in xbc_node_match_prefix()
- use signed type for offset in xbc_init_node()
- use size_t for key length tracking in xbc_verify_tree()
- change xbc_node_index() return type to uint16_t"
* tag 'bootconfig-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
lib/bootconfig: change xbc_node_index() return type to uint16_t
lib/bootconfig: use size_t for key length tracking in xbc_verify_tree()
lib/bootconfig: use signed type for offset in xbc_init_node()
lib/bootconfig: use size_t for strlen result in xbc_node_match_prefix()
lib/bootconfig: fix signed comparison in xbc_node_get_data()
lib/bootconfig: validate child node index in xbc_verify_tree()
lib/bootconfig: replace linux/kernel.h with specific includes
bootconfig: constify xbc_calc_checksum() data parameter
lib/bootconfig: drop redundant memset of xbc_nodes
lib/bootconfig: increment xbc_node_num after node init succeeds
lib/bootconfig: fix off-by-one in xbc_verify_tree() next node check
lib/bootconfig: narrow flag parameter type from uint32_t to uint16_t
lib/bootconfig: clean up comment typos and bracing
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- Support for Mobileye EyeQ6Lplus
- Cleanups and fixes
* tag 'mips_7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS/mtd: Handle READY GPIO in generic NAND platform data
MIPS/input: Move RB532 button to GPIO descriptors
MIPS: validate DT bootargs before appending them
MIPS: Alchemy: Remove unused forward declaration
MAINTAINERS: Mobileye: Add EyeQ6Lplus files
MIPS: config: add eyeq6lplus_defconfig
MIPS: Add Mobileye EyeQ6Lplus evaluation board dts
MIPS: Add Mobileye EyeQ6Lplus SoC dtsi
clk: eyeq: Add Mobileye EyeQ6Lplus OLB
clk: eyeq: Adjust PLL accuracy computation
clk: eyeq: Skip post-divisor when computing PLL frequency
pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB
pinctrl: eyeq5: Use match data
reset: eyeq: Add Mobileye EyeQ6Lplus OLB
MIPS: Add Mobileye EyeQ6Lplus support
dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB
dt-bindings: mips: Add Mobileye EyeQ6Lplus SoC
MIPS: dts: loongson64g-package: Switch to Loongson UART driver
mips: pci-mt7620: rework initialization procedure
mips: pci-mt7620: add more register init values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm:
"One fix to silence pgprot_modify() compiler warnings, and one patch
adding SECCOMP/SECCOMP_FILTER support together with the syscall and
ptrace fixes needed for it"
* tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: Define pgprot_modify to silence tautological comparison warnings
alpha: add support for SECCOMP and SECCOMP_FILTER
|
|
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
|
|
When platform_device_register() fails in startup_leds(), the embedded
struct device in platform_leds has already been initialized by
device_initialize(), but the failure path only reports the error and
does not drop the device reference for the current platform device:
startup_leds()
-> platform_device_register(&platform_leds)
-> device_initialize(&platform_leds.dev)
-> setup_pdev_dma_masks(&platform_leds)
-> platform_device_add(&platform_leds)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() after reporting the error.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fixes: 789e527adfc33 ("parisc: led: Rewrite LED/LCD driver to utilizize Linux LED subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On the 32-bit parisc architecture, we always used the
-ffunction-sections compiler option to tell the compiler to put the
functions into seperate text sections. This is necessary, otherwise
"big" kernel modules like ext4 or ipv6 fail to load because some
branches won't be able to reach their stubs.
Commit 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related
macros") broke this for parisc because all text sections will get
unconditionally merged now.
Introduce the ARCH_WANTS_MODULES_TEXT_SECTIONS config option which
avoids the text section merge for modules, and fix this issue by
enabling this option by default for 32-bit parisc.
Fixes: 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros")
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org # v6.19+
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When building for 64-bit and without CONFIG_COMPAT, leave out the
vdso32 binary.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Although we don't yet have a 64-bit userspace, allowing to disable
the compat mode should be possible.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The CONFIG_STACK_MAX_DEFAULT_SIZE_MB config option does not exist
when CONFIG_COMPAT is disabled. Use default 1 GB stack in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The signal handler code used CONFIG_64BIT to decide if compat handling
code should be compiled in. Fix it to use CONFIG_COMPAT instead.
This allows to disable CONFIG_COMPAT even when running a 64-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Drop unnecessary code and syscall tables when we run a 64-bit
kernel with conpat mode disabled.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Zen1's hardware divider can leave, under certain circumstances, partial
results from previous operations. Those results can be leaked by
another, attacker thread.
Fix that with a chicken bit.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running.
Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)")
Reported-by: Li Xiao <<252270051@hdu.edu.cn>
Cc: stable@vger.kernel.org
Reviewed-by: Li Xiao <252270051@hdu.edu.cn>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The assembly code of ip_fast_csum() triggers unaligned access warnings
if the IP header isn't correctly aligned:
Kernel: unaligned access to 0x173d22e76 in inet_gro_receive+0xbc/0x2e8 (iir 0x0e8810b6)
Kernel: unaligned access to 0x173d22e7e in inet_gro_receive+0xc4/0x2e8 (iir 0x0e88109a)
Kernel: unaligned access to 0x173d22e82 in inet_gro_receive+0xc8/0x2e8 (iir 0x0e90109d)
Kernel: unaligned access to 0x173d22e7a in inet_gro_receive+0xd0/0x2e8 (iir 0x0e9810b8)
Kernel: unaligned access to 0x173d22e86 in inet_gro_receive+0xdc/0x2e8 (iir 0x0e8810b8)
We have the option to a) ignore the warnings, b) work around it by
adding more code to check for alignment, or c) to switch to the generic
implementation and rely on the compiler to optimize the code.
Let's go with c), because a) isn't nice, and b) would effectively lead
to an implementation which is basically equal to c).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v7.0+
|
|
The function ccio_alloc_consistent() was renamed to ccio_alloc() by commit
79387179e2e4 ("parisc: convert to dma_map_ops"). Update the three stale
references in ccio-dma.c.
Also replace the obsolete PCI_DMA_TODEVICE constant name with DMA_TO_DEVICE in
a nearby comment to match the code.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several fixes:
- Add missing static const
- Correct type 1 emulation for VFIO_CHECK_EXTENSION when no-iommu is
turned on
- Fix selftest memory leak and syzkaller splat
- Fix missed -EFAULT in fault reporting write() fops
- Fix a race where map/unmap with the internal IOVA allocator can
unmap things it should not"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix a race with concurrent allocation and unmap
iommufd/selftest: Remove MOCK_IOMMUPT_AMDV1 format
iommufd: Fix return value of iommufd_fault_fops_write()
iommufd: update outdated comment for renamed iommufd_hw_pagetable_alloc()
iommufd/selftest: Fix page leaks in mock_viommu_{init,destroy}
iommufd: vfio compatibility extension check for noiommu mode
iommufd: Constify struct dma_buf_attach_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl updates from Jason Gunthorpe:
- New fwctl driver for Broadcom RDMA NICs
- Bug fix for non-modular builds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
fwctl/bnxt_fwctl: Add documentation entries
fwctl/bnxt_fwctl: Add bnxt fwctl device
fwctl/bnxt_en: Create an aux device for fwctl
fwctl/bnxt_en: Refactor aux bus functions to be more generic
fwctl/bnxt_en: Move common definitions to include/linux/bnxt/
|
|
Pull SoC ARM code updates from Arnd Bergmann:
"These are again very minimal updates:
- A workaround for firmware on Google Nexus 10
- A fix for early debugging on OMAP1
- A rework for Microchip SoC configuration
- Cleanups on OMAP2 an R-Car-Gen2"
* tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
arm64: Kconfig: provide a top-level switch for Microchip platforms
ARM: shmobile: rcar-gen2: Use of_phandle_args_equal() helper
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
ARM: samsung: exynos5250: Allow CPU1 to boot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, we enable a number of additional device drivers as loadable
modules, to support the added platforms. The largest change this time
is for OMAP2/3, which were not that well supported in the generic
arm32 defconfig.
The Tegra SoC platforms are now enabled by default in Kconfig when
ARCH_TEGRA is enabled, which means the defconfig change is done at the
same time as the Kconfig change here"
* tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arch/arm: Drop CONFIG_FIRMWARE_EDID from defconfig files
arm64: defconfig: Enable DP83TG720 PHY driver
arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
arm64: defconfig: enable pci-pwrctrl-generic as module
arm64: defconfig: Enable Lontium LT8713sx driver
arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller
arm64: defconfig: enable IPQ5210 RDP504 base configs
arm64: defconfig: Enable Milos LPASS LPI pinctrl driver
arm64: defconfig: Enable Kaanapali clock controllers
arm64: defconfig: Enable configs for Arduino VENTUNO Q
arm64: defconfig: Enable Qualcomm Eliza basic resource providers
arm64: defconfig: Enable S5KJN1 camera sensor
arm64: defconfig: Enable configurations for Toradex Aquila AM69
arm64: defconfig: remove SENSORS_SA67MCU
arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module
arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs
ARM: shmobile: defconfig: Refresh for v7.0-rc1
arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix integer underflow in encrypted read
- Four debug patches, adding a few tracepoints
- Minor update to MAINTAINERS file (preferred server URL for cifs)
- Remove the BUG_ON() calls in d_mark_tmpfile_name
* tag 'v7.1-rc1-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
MAINTAINERS: change git.samba.org to https
smb: client: fix integer underflow in receive_encrypted_read()
smb: client: add tracepoints for deferred handle caching
smb: client: add oplock level to smb3_open_done tracepoint
smb: client: add tracepoint for local lock conflicts
smb: client: add tracepoints for lock operations
vfs: get rid of BUG_ON() in d_mark_tmpfile_name()
|
|
Sashiko found possible double close of btf object fd [1],
which happens when strdup in load_module_btfs fails at which
point the obj->btf_module_cnt is already incremented.
The error path close btf fd and so does later cleanup code in
bpf_object_post_load_cleanup function.
Also libbpf_ensure_mem failure leaves btf object not assigned
and it's leaked.
Replacing the err_out label with break to make the error path
less confusing as suggested by Alan.
Incrementing obj->btf_module_cnt only if there's no failure
and releasing btf object in error path.
Fixes: 91abb4a6d79d ("libbpf: Support attachment of BPF tracing programs to kernel modules")
[1] https://sashiko.dev/#/patchset/20260324081846.2334094-1-jolsa%40kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260416100034.1610852-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Yihan Ding says:
====================
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
bpf_bprintf_prepare() currently rejects any non-ASCII byte in format
strings, so helpers such as bpf_trace_printk() fail to emit UTF-8
literal text even when those bytes are not part of a format specifier.
Keep plain text permissive while continuing to parse '%' sequences as
ASCII-only. Patch 1 updates snprintf_negative() at the same time so the
selftests stay consistent during bisection. Patch 2 then extends
trace_printk coverage for both the valid UTF-8 literal case and the
invalid non-ASCII-after-'%' case.
Changes in v3:
- drop Suggested-by trailers and move review credit into this changelog
- update test_snprintf_negative() in patch 1/2 so plain non-ASCII text is
accepted while non-ASCII after '%' is still rejected, keeping
./test_progs -t snprintf aligned with the new behavior.
- clarify the trace_printk negative case with an explicit invalid format
string and comment
- address Paul Chaignon's review feedback and keep the negative coverage
requested earlier by Alan Maguire
Changes in v2:
- split the core change and selftest updates into two patches
- drop unnecessary isspace()/ispunct() casts
- add comments to clarify plain-text vs format-specifier handling
- add a negative selftest for non-ASCII bytes inside '%' sequences
Testing:
- Reproduced on x86_64 without the core fix: ASCII trace output works,
while UTF-8 literal text in bpf_trace_printk() is rejected and
produces no trace output
- Verified with tools/testing/selftests/bpf: ./test_progs -t trace_printk
- Verified with tools/testing/selftests/bpf: ./test_progs -t snprintf
====================
Link: https://patch.msgid.link/20260416120142.1420646-1-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend trace_printk coverage to verify that UTF-8 literal text is
emitted successfully and that '%' parsing still rejects non-ASCII
bytes once format parsing starts.
Use an explicitly invalid format string for the negative case so the
ASCII-only parser expectation is visible from the test code itself.
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-3-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_bprintf_prepare() only needs ASCII parsing for conversion
specifiers. Plain text can safely carry bytes >= 0x80, so allow
UTF-8 literals outside '%' sequences while keeping ASCII control
bytes rejected and format specifiers ASCII-only.
This keeps existing parsing rules for format directives unchanged,
while allowing helpers such as bpf_trace_printk() to emit UTF-8
literal text.
Update test_snprintf_negative() in the same commit so selftests keep
matching the new plain-text vs format-specifier split during bisection.
Fixes: 48cac3f4a96d ("bpf: Implement formatted output helpers with bstr_printf")
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-2-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Mykyta Yatsenko says:
====================
bpf: Fix NULL deref when storing scalar into kptr slot
map_kptr_match_type() accesses reg->btf before confirming the register
is PTR_TO_BTF_ID. A scalar store into a kptr slot has no btf, causing
a NULL pointer dereference. Guard base_type() first.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
====================
Link: https://patch.msgid.link/20260416-kptr_crash-v1-0-5589356584b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify that the verifier rejects a direct scalar write to a kptr map
value slot without crashing.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260416-kptr_crash-v1-2-5589356584b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local
kptr") refactored map_kptr_match_type() to branch on btf_is_kernel()
before checking base_type(). A scalar register stored into a kptr
slot has no btf, so the btf_is_kernel(reg->btf) call dereferences
NULL.
Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf
access.
Fixes: ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local kptr")
Reported-by: Hiker Cl <clhiker365@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221372
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416-kptr_crash-v1-1-5589356584b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- robustification of hid-asus driver to prepare for support for
more devices which is underway (Denis Benato)
|
|
- sync of HID-BPF with udev-hid-bpf (Benjamin Tissoires, Muhammed Rishal)
|
|
- power management improvements to intel-thc-hid driver (Even Xu)
|
|
- new driver for Lenovo Legion Go / S devices (Derek J. Clark)
|
|
|
|
- various new per-device(-group) type quirks for pidff driver (Tomasz Pakuła)
|
|
|
