| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Michael Chan says:
====================
bnxt_en: Add RSS context resource check
Add missing logic to check that we have enough RSS contexts. This
will make the recent change to increase the use of RSS contexts for
a larger RSS indirection table more complete.
====================
Link: https://patch.msgid.link/20260207235118.1987301-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_need_reserve_rings() checks all resources except HW RSS contexts
to determine if a new reservation is required. For completeness, add
the check for HW RSS contexts. This makes the code more complete after
the recent commit to increase the number of RSS contexts for a larger
RSS indirection table:
Fixes: 51b9d3f948b8 ("bnxt_en: Use a larger RSS indirection table on P5_PLUS chips")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260207235118.1987301-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_need_reserve_rings() checks 6 ring resources against the reserved
values to determine if a new reservation is needed. Factor out the code
to collect the total resources into a new helper function
bnxt_get_total_resources() to make the code cleaner and easier to read.
Instead of individual scalar variables, use the struct bnxt_hw_rings to
hold all the ring resources. Using the struct, hwr.cp replaces the nq
variable and the chip specific hwr.cp_p5 replaces cp on newer chips.
There is no change in behavior. This will make it easier to check the
RSS context resource in the next patch.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260207235118.1987301-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 93d73005bff4 ("x86/entry/vdso: Rename vdso_image_* to
vdso*_image") updated the vdso .gitignore file with the new filenames,
which is certainly not incorrect.
However, while adding new generated names is obviously the right thing
to do, you should *not* immediately remove the old filenames from the
.gitignore file when things move around or get renamed, because people
still have those old generated files in their build trees - and they
haven't suddenly become valid files to commit to the repository just
because they were moved or renamed.
While it's mostly just a slight visual nuisance for 'git status' that
can be fixed up with a clean build tree, it can become more serious than
that: see for example commit 04a3389b3535 ("Remove stale generated
'genheaders' file").
That commit removed up a stale generated file that had been carelessly
committed by a kernel developer because it wasn't properly ignored any
more and thus showed up as a new file in their tree.
Fixes: 93d73005bff4 ("x86/entry/vdso: Rename vdso_image_* to vdso*_image")
Cc: Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Future extensions with psock will override their own sk->sk_write_space
callback. This patch ensures that the overridden sk_write_space can be
invoked by MPTCP.
INDIRECT_CALL is used to keep the default path optimised.
Note that sk->sk_write_space was never called directly with MPTCP
sockets, so changing it to sk_stream_write_space in the init, and using
it from mptcp_write_space() is not supposed to change the current
behaviour.
This patch is shared early to ease discussions around future RFC and
avoid confusions with this "fix" that is needed for different future
extensions.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260206-net-next-mptcp-write_space-override-v2-1-e0b12be818c6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown.
Fixes: e740003874ed ("octeontx2-af: Flow control resource management")
Cc: stable@vger.kernel.org
Signed-off-by: Bo Sun <bo@mboxify.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260206130925.1087588-2-bo@mboxify.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"The usual smattering of x86/misc changes.
The IPv6 patch in here surprised me in a couple of ways. First, the
function it inlines is able to eat a lot more CPU time than I would
have expected. Second, the inlining does not seem to bloat the kernel,
at least in the configs folks have tested.
- Inline x86-specific IPv6 checksum helper
- Update IOMMU docs to use stable identifiers
- Print unhashed pointers on fatal stack overflows"
* tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Print unhashed pointers on stack overflow
Documentation/x86: Update IOMMU spec references to use stable identifiers
x86/lib: Inline csum_ipv6_magic()
|
|
Breno Leitao says:
====================
net: netconsole: convert to NBCON console infrastructure
This series adds support for the nbcon (new buffer console) infrastructure
to netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
The implementation is introduced in three steps:
0) Extend printk to expose CPU and taskname (task->comm) where the
printk originated from. (Thanks John and Petr for the support in
getting this done)
1) Refactor the message fragmentation logic into a reusable helper function
2) Extend nbcon support to non-extended (basic) consoles using the same
infrastructure.
The initial discussion about it appeared a while ago in [1], in order to
solve Mike's HARDIRQ-safe -> HARDIRQ-unsafe lock order warning, and the root
cause is that some hosts were calling IRQ unsafe locks from inside console
lock.
At that time, we didn't have the CON_NBCON_ATOMIC_UNSAFE yet. John
kindly implemented CON_NBCON_ATOMIC_UNSAFE in 187de7c212e5 ("printk:
nbcon: Allow unsafe write_atomic() for panic"), and now we can
implement netconsole on top of nbcon.
Important to note that netconsole continues to call netpoll and the
network TX helpers with interrupt disable, given the TX are called with
target_list_lock.
====================
Link: https://patch.msgid.link/20260206-nbcon-v7-0-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the CPU and task name captured at printk() time from
nbcon_write_context instead of querying the current execution context.
This provides accurate information about where the message originated,
rather than where netconsole happens to be running.
For CPU, use wctxt->cpu instead of raw_smp_processor_id().
For taskname, use wctxt->comm directly which contains the task
name captured at printk time.
This change ensures netconsole outputs reflect the actual context that
generated the log message, which is especially important when the
console driver runs asynchronously in a dedicated thread.
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260206-nbcon-v7-4-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert netconsole from the legacy console API to the NBCON framework.
NBCON provides threaded printing which unblocks printk()s and flushes in
a thread, decoupling network TX from printk() when netconsole is
in use.
Since netconsole relies on the network stack which cannot safely operate
from all atomic contexts, mark both consoles with
CON_NBCON_ATOMIC_UNSAFE. (See discussion in [1])
CON_NBCON_ATOMIC_UNSAFE restricts write_atomic() usage to emergency
scenarios (panic) where regular messages are sent in threaded mode.
Implementation changes:
- Unify write_ext_msg() and write_msg() into netconsole_write()
- Add device_lock/device_unlock callbacks to manage target_list_lock
- Use nbcon_enter_unsafe()/nbcon_exit_unsafe() around network
operations.
- If nbcon_enter_unsafe() fails, just return given netconsole lost
the ownership of the console.
- Set write_thread and write_atomic callbacks (both use same function)
Link: https://lore.kernel.org/all/b2qps3uywhmjaym4mht2wpxul4yqtuuayeoq4iv4k3zf5wdgh3@tocu6c7mj4lt/ [1]
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260206-nbcon-v7-3-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the message fragmentation logic from write_msg() into a
dedicated send_msg_udp() function. This improves code readability
and prepares for future enhancements.
The new send_msg_udp() function handles splitting messages that
exceed MAX_PRINT_CHUNK into smaller fragments and sending them
sequentially. This function is placed before send_ext_msg_udp()
to maintain a logical ordering of related functions.
No functional changes - this is purely a refactoring commit.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260206-nbcon-v7-2-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend struct printk_info to include the task name, pid, and CPU
number where printk messages originate. This information is captured
at vprintk_store() time and propagated through printk_message to
nbcon_write_context, making it available to nbcon console drivers.
This is useful for consoles like netconsole that want to include
execution context in their output, allowing correlation of messages
with specific tasks and CPUs regardless of where the console driver
actually runs.
The feature is controlled by CONFIG_PRINTK_EXECUTION_CTX, which is
automatically selected by CONFIG_NETCONSOLE_DYNAMIC. When disabled,
the helper functions compile to no-ops with no overhead.
Suggested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260206-nbcon-v7-1-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Dave Hansen:
"This is entirely composed of a set of long overdue VDSO cleanups. They
makes the VDSO build much more logical and zap quite a bit of old
cruft.
It also results in a coveted net-code-removal diffstat"
* tag 'x86_entry_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/vdso: Add vdso2c to .gitignore
x86/entry/vdso32: Omit '.cfi_offset eflags' for LLVM < 16
MAINTAINERS: Adjust vdso file entry in INTEL SGX
x86/entry/vdso/selftest: Update location of vgetrandom-chacha.S
x86/entry/vdso: Fix filtering of vdso compiler flags
x86/entry/vdso: Update the object paths for "make vdso_install"
x86/entry/vdso32: When using int $0x80, use it directly
x86/cpufeature: Replace X86_FEATURE_SYSENTER32 with X86_FEATURE_SYSFAST32
x86/vdso: Abstract out vdso system call internals
x86/entry/vdso: Include GNU_PROPERTY and GNU_STACK PHDRs
x86/entry/vdso32: Remove open-coded DWARF in sigreturn.S
x86/entry/vdso32: Remove SYSCALL_ENTER_KERNEL macro in sigreturn.S
x86/entry/vdso32: Don't rely on int80_landing_pad for adjusting ip
x86/entry/vdso: Refactor the vdso build
x86/entry/vdso: Move vdso2c to arch/x86/tools
x86/entry/vdso: Rename vdso_image_* to vdso*_image
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Make the SEV internal header really internal and carve out the
SVSM-specific code into a separate compilation unit, along with other
cleanups and fixups
[ TLA translation service: 'SEV' is AMD's 'Secure Encrypted
Virtualization' and SVSM is an ETLA ('Enhanced TLA') for 'Secure
VM Service Module'.
Some of us have trouble keeping track of this all and need all the
help we can get ]
* tag 'x86_sev_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Don't emit BSS_DECRYPTED section unless it is in use
x86/sev: Use kfree_sensitive() when freeing a SNP message descriptor
x86/sev: Rename sev_es_ghcb_handle_msr() to __vc_handle_msr()
x86/sev: Carve out the SVSM code into a separate compilation unit
x86/sev: Add internal header guards
x86/sev: Move the internal header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt updates from Borislav Petkov:
- A nice cleanup to the paravirt code containing a unification of the
paravirt clock interface, taming the include hell by splitting the
pv_ops structure and removing of a bunch of obsolete code (Juergen
Gross)
* tag 'x86_paravirt_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/paravirt: Use XOR r32,r32 to clear register in pv_vcpu_is_preempted()
x86/paravirt: Remove trailing semicolons from alternative asm templates
x86/pvlocks: Move paravirt spinlock functions into own header
x86/paravirt: Specify pv_ops array in paravirt macros
x86/paravirt: Allow pv-calls outside paravirt.h
objtool: Allow multiple pv_ops arrays
x86/xen: Drop xen_mmu_ops
x86/xen: Drop xen_cpu_ops
x86/xen: Drop xen_irq_ops
x86/paravirt: Move pv_native_*() prototypes to paravirt.c
x86/paravirt: Introduce new paravirt-base.h header
x86/paravirt: Move paravirt_sched_clock() related code into tsc.c
x86/paravirt: Use common code for paravirt_steal_clock()
riscv/paravirt: Use common code for paravirt_steal_clock()
loongarch/paravirt: Use common code for paravirt_steal_clock()
arm64/paravirt: Use common code for paravirt_steal_clock()
arm/paravirt: Use common code for paravirt_steal_clock()
sched: Move clock related paravirt code to kernel/sched
paravirt: Remove asm/paravirt_api_clock.h
x86/paravirt: Move thunk macros to paravirt_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader update from Borislav Petkov:
- Since debugging the microcode loader makes sense on baremetal too (it
was used in a guest only until now), extend it to be able to do that
too
* tag 'x86_microcode_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Allow loader debugging to be enabled on baremetal too
|
|
fsl,imx(1|25|27|31|35)-avic
Add compatiblie string fsl,imx(1|25|27|31|35)-avic for i.MX3 SoCs (over 15
years old).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260210221215.1575844-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual set of cleanups and simplifications all over the tree
* tag 'x86_cleanups_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/segment: Use MOVL when reading segment registers
selftests/x86: Clean up sysret_rip coding style
x86/mm: Hide mm_free_global_asid() definition under CONFIG_BROADCAST_TLB_FLUSH
x86/crash: Use set_memory_p() instead of __set_memory_prot()
x86/CPU/AMD: Simplify the spectral chicken fix
x86/platform/olpc: Replace strcpy() with strscpy() in xo15_sci_add()
x86/split_lock: Remove dead string when split_lock_detect=fatal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Extend the resctrl machinery to support telemetry monitoring on
Intel (Tony Luck)
The practical usage of this is being able to tell how much energy or
how much work can be attributed to a group of tasks tracked under a
single idenitifier. Prepend this work with proper refactoring of
resctrl domains handling code.
* tag 'x86_cache_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86,fs/resctrl: Update documentation for telemetry events
x86/resctrl: Enable RDT_RESOURCE_PERF_PKG
fs/resctrl: Move RMID initialization to first mount
x86,fs/resctrl: Compute number of RMIDs as minimum across resources
fs/resctrl: Move allocation/free of closid_num_dirty_rmid[]
x86/resctrl: Handle number of RMIDs supported by RDT_RESOURCE_PERF_PKG
x86/resctrl: Add energy/perf choices to rdt boot option
x86,fs/resctrl: Handle domain creation/deletion for RDT_RESOURCE_PERF_PKG
fs/resctrl: Refactor rmdir_mondata_subdir_allrdtgrp()
fs/resctrl: Refactor mkdir_mondata_subdir()
x86/resctrl: Read telemetry events
x86/resctrl: Find and enable usable telemetry events
x86,fs/resctrl: Add architectural event pointer
x86,fs/resctrl: Fill in details of events for performance and energy GUIDs
x86/resctrl: Discover hardware telemetry events
fs/resctrl: Emphasize that L3 monitoring resource is required for summing domains
x86,fs/resctrl: Add and initialize a resource for package scope monitoring
x86,fs/resctrl: Add an architectural hook called for first mount
x86,fs/resctrl: Support binary fixed point event counters
x86,fs/resctrl: Handle events that can be read from any CPU
...
|
|
Intel platforms are transitioning from traditional SGX-based
attestation toward DICE-based attestation as part of a broader move
toward open and standardized attestation models. DICE enables layered
and extensible attestation, where evidence is accumulated across
multiple boot stages.
With SGX-based attestation, Quote sizes are typically under 8KB, as the
payload consists primarily of Quote data and a small certificate bundle.
Existing TDX guest code sizes the Quote buffer accordingly.
DICE-based attestation produces significantly larger Quotes due to the
inclusion of evidence (certificate chains) from multiple boot layers.
The cumulative Quote size can reach approximately 100KB.
Increase GET_QUOTE_BUF_SIZE to 128KB to ensure sufficient buffer
capacity for DICE-based Quote payloads.
Reviewed-by: Fang Peter <peter.fang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20260211001712.1531955-4-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Building trusted-keys as a module fails modpost with:
ERROR: modpost: "plpks_wrapping_is_supported" [security/keys/trusted-keys/
trusted.ko] undefined!
Export plpks_wrapping_is_supported() so trusted-keys links cleanly
This patch is intended to be applied on top of the earlier "Extend "trusted
" keys to support a new trust source named the PowerVM Key Wrapping Module
(PKWM)" series (v5).
Link: https://lore.kernel.org/all/20260127145228.48320-1-ssrish@linux.ibm.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010724.1g9hbLKv-lkp@intel.com/
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260201165344.950870-1-ssrish@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 bug documentation update from Borislav Petkov:
- Add EPERM to the possible PR_SET_SPECULATION_CTRL pr_ctl() error
codes to "legitimize" it
* tag 'x86_bugs_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix PR_SET_SPECULATION_CTRL error codes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternatives update from Borislav Petkov:
- Reorganize the alternatives patching mechanism to patch a single
location only once instead of multiple times as it was the case with
the two or three alternative options macros
* tag 'x86_alternatives_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Patch a single alternative location only once
x86/alternative: Use helper functions for patching alternatives
|
|
Confidential Computing (CoCo) attestation is evolving toward
standardized models such as DICE (Device Identifier Composition Engine)
and Post-Quantum Cryptography (PQC), which rely on layered certificate
chains and larger cryptographic signatures.
A typical PQC certificate can range from 5KB to 15KB, and DICE-based
architectures accumulate these certificates across multiple boot
stages. In such configurations, the total attestation evidence can
reach several megabytes, exceeding the current 32KB limit.
Increase TSM_REPORT_OUTBLOB_MAX to 16MB to accommodate these larger
certificate chains. This provides sufficient headroom to handle
evolving requirements without requiring frequent updates to the limit.
TSM_REPORT_OUTBLOB_MAX is used by the configfs read interface to cap
the maximum allowed binary blob size for outblob, auxblob and
manifestblob attributes. Hence, the per-open-file worst case memory
allocation increases from 32KB to 16MB. Multiple concurrent readers
multiply this cost (e.g., N readers of an M-byte blob incur NxM bytes
of vmalloc-backed memory). However, allocations are performed on demand
and remain proportional to the actual blob length, not the configured
maximum.
Reviewed-by: Fang Peter <peter.fang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20260211001712.1531955-3-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The configfs-tsm-report interface can fail with -EFBIG when the
attestation report generated by a TSM provider exceeds internal
maximums (TSM_REPORT_OUTBLOB_MAX). However, this error condition and
its handling are not currently documented in the ABI.
Userspace tools need to understand how to interpret various error
conditions when reading attestation reports.
Document that reads fail with -EFBIG when reports exceed size limits,
with guidance on how to resolve them.
Reviewed-by: Fang Peter <peter.fang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20260211001712.1531955-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Remove two drivers for obsolete hardware: i82443bxgx_edac and
r82600_edac
- Add support for Intel Amston Lake and Panther Lake-H SoCs to
igen6_edac
- The usual amount of fixes and cleanups
* tag 'edac_updates_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/r82600: Remove this obsolete driver
EDAC/i82443bxgx: Remove driver that has been marked broken since 2007
EDAC/amd64: Avoid a -Wformat-security warning
RAS/AMD/ATL: Remove an unneeded semicolon
EDAC/igen6: Add more Intel Panther Lake-H SoCs support
EDAC/igen6: Make masks of {MCHBAR, TOM, TOUUD, ECC_ERROR_LOG} configurable
EDAC/igen6: Add two Intel Amston Lake SoCs support
EDAC/i5400: Fix snprintf() limit calculation in calculate_dimm_size()
EDAC/i5000: Fix snprintf() size calculation in calculate_dimm_size()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq updates from Thomas Gleixner:
"Trivial cleanups for the posted MSI interrupt handling"
* tag 'x86-irq-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq_remapping: Sanitize posted_msi_supported()
x86/irq: Cleanup posted MSI code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number
from the VDSO, but as the VDSO data is per process there is no way to
make it work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to
pass -fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when
__beNN types are used with get/put_unaligned() as sparse builds add a
special 'bitwise' attribute to them which prevents sparse to evaluate
the Generic in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the
problem, but requires a recent sparse install. So this adds a sanity
check to sparse builds, which validates that sparse is available and
capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function
call overhead and problems with automatic stack variable
initialization.
Interestingly enough the force inlining results in smaller code than
the un-inlined variant produced by GCC when optimizing for size.
* tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Force inlining of __cvdso_clock_getres_common()
x86/percpu: Make CONFIG_USE_X86_SEG_SUPPORT work with sparse
compiler: Use __typeof_unqual__() for __unqual_scalar_typeof()
powerpc/vdso: Provide clock_getres_time64()
tools headers: Remove unneeded ignoring of warnings in unaligned.h
tools headers: Update the linux/unaligned.h copy with the kernel sources
vdso: Switch get/put_unaligned() from packed struct to memcpy()
parisc: Inline a type punning version of get_unaligned_le32()
vdso: Remove struct getcpu_cache
MIPS: vdso: Provide getres_time64() for 32-bit ABIs
arm64: vdso32: Provide clock_getres_time64()
ARM: VDSO: Provide clock_getres_time64()
ARM: VDSO: Patch out __vdso_clock_getres() if unavailable
x86/vdso: Provide clock_getres_time64() for x86-32
selftests: vDSO: vdso_test_abi: Add test for clock_getres_time64()
selftests: vDSO: vdso_test_abi: Use UAPI system call numbers
selftests: vDSO: vdso_config: Add configurations for clock_getres_time64()
vdso: Add prototype for __vdso_clock_getres_time64()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Inline timecounter_cyc2time() as that is now used in the networking
hotpath. Inlining it significantly improves performance.
- Optimize the tick dependency check in case that the tracepoint is
disabled, which improves the hotpath performance in the tick
management code, which is a hotpath on transitions in and out of
idle.
- The usual cleanups and improvements
* tag 'timers-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/kunit: Document handling of negative years of is_leap()
tick/nohz: Optimize check_tick_dependency() with early return
time/sched_clock: Use ACCESS_PRIVATE() to evaluate hrtimer::function
hrtimer: Drop _tv64() helpers
hrtimer: Remove public definition of HIGH_RES_NSEC
hrtimer: Remove unused resolution constants
time/timecounter: Inline timecounter_cyc2time()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"A rather small set of boring cleanups, fixes and improvements"
* tag 'timers-clocksource-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/mips-gic-timer: Move GIC timer to request_percpu_irq()
clocksource/drivers/timer-sp804: Fix an Oops when read_current_timer is called on ARM32 platforms where the SP804 is not registered as the sched_clock.
clocksource/drivers/armada-370-xp: Fix dead link to timer binding
clocksource/drivers/timer-integrator-ap: Add missing Kconfig dependency on OF
clocksource/drivers/sh_tmu: Always leave device running after probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core subsystem:
- Remove the interrupt timing infrastructure
This was added seven years ago to be used for power management
purposes, but that integration never happened.
- Clean up the remaining setup_percpu_irq() users
The memory allocator is available when interrupts can be requested
so there is not need for static irq_action. Move the remaining
users to request_percpu_irq() and delete the historical cruft.
- Warn when interrupt flag inconsistencies are detected in
request*_irq().
Inconsistent flags can lead to hard to diagnose malfunction. The
fallout of this new warning has been addressed in next and the
fixes are coming in via the maintainer trees and the tip
irq/cleanup pull requests.
- Invoke affinity notifier when CPU hotplug breaks affinity
Otherwise the code using the notifier misses the affinity change
and operates on stale information.
- The usual cleanups and improvements"
* tag 'irq-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/proc: Replace snprintf with strscpy in register_handler_proc
genirq/cpuhotplug: Notify about affinity changes breaking the affinity mask
genirq: Move clear of kstat_irqs to free_desc()
genirq: Warn about using IRQF_ONESHOT without a threaded handler
irqdomain: Fix up const problem in irq_domain_set_name()
genirq: Remove setup_percpu_irq()
clocksource/drivers/mips-gic-timer: Move GIC timer to request_percpu_irq()
MIPS: Move IP27 timer to request_percpu_irq()
MIPS: Move IP30 timer to request_percpu_irq()
genirq: Remove __request_percpu_irq() helper
genirq: Remove IRQ timing tracking infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A series of treewide cleanups to ensure interrupt request consistency.
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs request_irq() and causes the same issues
which where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags
related to interrupt threading namely IRQF_ONESHOT and
IRQF_NO_THREAD. This leads to warnings and/or malfunction when
forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt)
handler which just returns IRQ_WAKE_THREAD. The same functionality
is provided by the core code when the primary handler argument of
request_thread_irq() is set to NULL"
* tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
media: pci: mg4b: Use IRQF_NO_THREAD
mfd: wm8350-core: Use IRQF_ONESHOT
thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD
rtc: amlogic-a4: Remove IRQF_ONESHOT
usb: typec: fusb302: Remove IRQF_ONESHOT
EDAC/altera: Remove IRQF_ONESHOT
char: tpm: cr50: Remove IRQF_ONESHOT
ARM: versatile: Remove IRQF_ONESHOT
scsi: efct: Use IRQF_ONESHOT and default primary handler
Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler
bus: fsl-mc: Use default primary handler
mailbox: bcm-ferxrm-mailbox: Use default primary handler
iommu/amd: Use core's primary handler and set IRQF_ONESHOT
platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()
genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform update from Ingo MolnarL
- x86/hyperv: Fix smp_ops build failure on UP kernels (Ingo Molnar)
* tag 'x86-platform-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Fix smp_ops build failure on UP kernels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
- CPU model updates (Andrew Cooper):
- amd: Correct the microcode table for Zenbleed
- amd: Use ZEN_MODEL_STEP_UCODE() for erratum_1386_microcode[]
- Drop vestigial PBE logic in AMD/Hygon/Centaur/Cyrix
- tsx: Set default TSX mode to auto (Nikolay Borisov)
- Drop unused Kconfig symbol X86_P6_NOP (Randy Dunlap)
* tag 'x86-cpu-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Set default TSX mode to auto
x86/cpu: Drop unused Kconfig symbol X86_P6_NOP
x86/cpu: Drop vestigial PBE logic in AMD/Hygon/Centaur/Cyrix
x86/cpu/amd: Use ZEN_MODEL_STEP_UCODE() for erratum_1386_microcode[]
x86/cpu/amd: Correct the microcode table for Zenbleed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC update from Ingo Molnar:
- Inline __x2apic_send_IPI_dest() (Eric Dumazet)
* tag 'x86-apic-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Inline __x2apic_send_IPI_dest()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/boot updates from Ingo Molnar:
- x86/acpi: Add acpi=spcr to use SPCR-provided default console
(Shenghao Yang)
- x86/acpi/boot: Correct the acpi_is_processor_usable() check again
(Yazen Ghannam)
- Refresh the x86 memory map (e820 table) handling code, and make the
printouts a bit more informative (Ingo Molnar)
* tag 'x86-boot-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/acpi: Add acpi=spcr to use SPCR-provided default console
x86/boot/e820: Use <linux/sizes.h> symbols for literals
x86/boot/e820: Make sure e820_search_gap() finds all gaps
x86/boot/e820: Simplify the e820__range_remove() API
x86/boot/e820: Remove e820__range_remove()'s unused return parameter
x86/boot/e820: Simplify append_e820_table() and remove restriction on single-entry tables
x86/boot/e820: Standardize __init/__initdata tag placement
x86/boot/e820: Simplify & clarify __e820__range_add() a bit
x86/boot/e820: Rename gap_start/gap_size to max_gap_start/max_gap_start in e820_search_gap() et al
x86/boot/e820: Change e820_search_gap() to search for the highest-address PCI gap
x86/boot/e820: Clean up e820__setup_pci_gap()/e820_search_gap() a bit
x86/boot/e820: Change struct e820_table::nr_entries type from __u32 to u32
x86/boot/e820: Standardize e820 table index variable types under 'u32'
x86/boot/e820: Standardize e820 table index variable names under 'idx'
x86/boot/e820: Remove unnecessary header inclusions
x86/boot/e820: Clean up __refdata use a bit
x86/boot/e820: Clean up __e820__range_add() a bit
x86/boot/e820: Improve e820_print_type() messages
x86/boot/e820: Clean up confusing and self-contradictory verbiage around E820 related resource allocations
x86/boot/e820: Remove pointless early_panic() indirection
...
|
|
This patch introduces /sys/fs/f2fs/<disk>/critical_task_priority, w/
this new sysfs interface, we can tune priority of f2fs_ckpt thread and
f2fs_gc thread.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional function
calls
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John
Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline (Arnd
Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings (Tamir
Duberstein)"
* tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
locking/rwlock: Fix write_trylock_irqsave() with CONFIG_INLINE_WRITE_TRYLOCK
rcu: Mark lockdep_assert_rcu_helper() __always_inline
compiler-context-analysis: Remove __assume_ctx_lock from initializers
tomoyo: Use scoped init guard
crypto: Use scoped init guard
kcov: Use scoped init guard
compiler-context-analysis: Introduce scoped init guards
cleanup: Make __DEFINE_LOCK_GUARD handle commas in initializers
seqlock: fix scoped_seqlock_read kernel-doc
tools: Update context analysis macros in compiler_types.h
rust: sync: Replace `kernel::c_str!` with C-Strings
rust: sync: Inline various lock related methods
rust: helpers: Move #define __rust_helper out of atomic.c
rust: wait: Add __rust_helper to helpers
rust: time: Add __rust_helper to helpers
rust: task: Add __rust_helper to helpers
rust: sync: Add __rust_helper to helpers
rust: refcount: Add __rust_helper to helpers
rust: rcu: Add __rust_helper to helpers
rust: processor: Add __rust_helper to helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add '__rust_helper' annotation to the C helpers
This is needed to inline these helpers into Rust code
- Remove imports available via the prelude, treewide
This was possible thanks to a new lint in Klint that Gary has
implemented -- more Klint-related changes, including initial
upstream support, are coming
- Deduplicate pin-init flags
'kernel' crate:
- Add support for calling a function exactly once with the new
'do_once_lite!' macro (and 'OnceLite' type)
Based on this, add 'pr_*_once!' macros to print only once
- Add 'impl_flags!' macro for defining common bitflags operations:
impl_flags!(
/// Represents multiple permissions.
#[derive(Debug, Clone, Default, Copy, PartialEq, Eq)]
pub struct Permissions(u32);
/// Represents a single permission.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Permission {
/// Read permission.
Read = 1 << 0,
/// Write permission.
Write = 1 << 1,
/// Execute permission.
Execute = 1 << 2,
}
);
let mut f: Permissions = Permission::Read | Permission::Write;
assert!(f.contains(Permission::Read));
assert!(!f.contains(Permission::Execute));
f |= Permission::Execute;
assert!(f.contains(Permission::Execute));
let f2: Permissions = Permission::Write | Permission::Execute;
assert!((f ^ f2).contains(Permission::Read));
assert!(!(f ^ f2).contains(Permission::Write));
- 'bug' module: support 'CONFIG_DEBUG_BUGVERBOSE_DETAILED' in the
'warn_on!' macro in order to show the evaluated condition alongside
the file path:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at ...
Modules linked in: rust_minimal(+)
- Add safety module with 'unsafe_precondition_assert!' macro,
currently a wrapper for 'debug_assert!', intended to mark the
validation of safety preconditions where possible:
/// # Safety
///
/// The caller must ensure that `index` is less than `N`.
unsafe fn set_unchecked(&mut self, index: usize, value: T) {
unsafe_precondition_assert!(
index < N,
"set_unchecked() requires index ({index}) < N ({N})"
);
...
}
- Add instructions to 'build_assert!' documentation requesting to
always inline functions when used with function arguments
- 'ptr' module: replace 'build_assert!' with a 'const' one
- 'rbtree' module: reduce unsafe blocks on pointer derefs
- 'transmute' module: implement 'FromBytes' and 'AsBytes' for
inhabited ZSTs, and use it in Nova
- More treewide replacements of 'c_str!' with C string literals
'macros' crate:
- Rewrite most procedural macros ('module!', 'concat_idents!',
'#[export]', '#[vtable]', '#[kunit_tests]') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
This also allows to support '#[cfg]' properly in the '#[vtable]'
macro, to support arbitrary types in 'module!' macro (not just an
identifier) and to remove several custom parsing helpers we had
- Use 'quote!' from the recently vendored 'quote' library and remove
our custom one
The vendored one also allows us to avoid quoting '"' and '{}'
inside the template anymore and editors can now highlight it. In
addition, it improves robustness as it eliminates the need for
string quoting and escaping
- Use 'pin_init::zeroed()' to simplify KUnit code
'pin-init' crate:
- Rewrite all procedural macros ('[pin_]init!', '#[pin_data]',
'#[pinned_drop]', 'derive([Maybe]Zeroable)') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
- Implement 'InPlaceWrite' for '&'static mut MaybeUninit<T>'. This
enables users to use external allocation mechanisms such as
'static_cell'
- Support tuple structs in 'derive([Maybe]Zeroable)'
- Support attributes on fields in '[pin_]init!' (such as
'#[cfg(...)]')
- Add a '#[default_error(<type>)]' attribute to '[pin_]init!' to
override the default error (when no '? Error' is specified)
- Support packed structs in '[pin_]init!' with
'#[disable_initialized_field_access]'
- Remove 'try_[pin_]init!' in favor of merging their feature with
'[pin_]init!'. Update the kernel's own 'try_[pin_]init!' macros to
use the 'default_error' attribute
- Correct 'T: Sized' bounds to 'T: ?Sized' in the generated
'PinnedDrop' check by '#[pin_data]'
Documentation:
- Conclude the Rust experiment
MAINTAINERS:
- Add "RUST [RUST-ANALYZER]" entry for the rust-analyzer support.
Tamir and Jesung will take care of it. They have both been active
around it for a while. The new tree will flow through the Rust one
- Add Gary as maintainer for "RUST [PIN-INIT]"
- Update Boqun and Tamir emails to their kernel.org accounts
And a few other cleanups and improvements"
* tag 'rust-6.20-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (59 commits)
rust: safety: introduce `unsafe_precondition_assert!` macro
rust: add `impl_flags!` macro for defining common bitflag operations
rust: print: Add pr_*_once macros
rust: bug: Support DEBUG_BUGVERBOSE_DETAILED option
rust: print: Add support for calling a function exactly once
rust: kbuild: deduplicate pin-init flags
gpu: nova-core: remove imports available via prelude
rust: clk: replace `kernel::c_str!` with C-Strings
MAINTAINERS: Update my email address to @kernel.org
rust: macros: support `#[cfg]` properly in `#[vtable]` macro.
rust: kunit: use `pin_init::zeroed` instead of custom null value
rust: macros: rearrange `#[doc(hidden)]` in `module!` macro
rust: macros: allow arbitrary types to be used in `module!` macro
rust: macros: convert `#[kunit_tests]` macro to use `syn`
rust: macros: convert `concat_idents!` to use `syn`
rust: macros: convert `#[export]` to use `syn`
rust: macros: use `quote!` for `module!` macro
rust: macros: use `syn` to parse `module!` macro
rust: macros: convert `#[vtable]` macro to use `syn`
rust: macros: use `quote!` from vendored crate
...
|
|
Pull bitmap updates from Yury Norov:
- more rust helpers (Alice)
- more bitops tests (Ryota)
- FIND_NTH_BIT() uninitialized variable fix (Lee Yongjun)
- random cleanups (Andy, H. Peter)
* tag 'bitmap-for-6.20' of https://github.com/norov/linux:
lib/tests: extend KUnit test for bitops with more cases
bitops: Add more files to the MAINTAINERS
lib/find_bit: fix uninitialized variable use in FIND_NTH_BIT
lib/tests: add KUnit test for bitops
rust: cpumask: add __rust_helper to helpers
rust: bitops: add __rust_helper to helpers
rust: bitmap: add __rust_helper to helpers
linux/bitfield.h: replace __auto_type with auto
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
|
|
This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein.
Fixes: f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/linux-sound/5056506.GXAFRqVoOG@steina-w/
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260210185714.556385-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need to fix some commits that went into the final release.
|
|
The newly added procfs code fails to build when CONFIG_IPv6 is disabled:
fs/smb/server/connection.c: In function 'proc_show_clients':
fs/smb/server/connection.c:47:58: error: 'struct ksmbd_conn' has no member named 'inet6_addr'; did you mean 'inet_addr'?
47 | seq_printf(m, "%-20pI6c", &conn->inet6_addr);
| ^~~~~~~~~~
| inet_addr
make[7]: *** [scripts/Makefile.build:279: fs/smb/server/connection.o] Error 1
fs/smb/server/mgmt/user_session.c: In function 'show_proc_sessions':
fs/smb/server/mgmt/user_session.c:215:65: error: 'struct ksmbd_conn' has no member named 'inet6_addr'; did you mean 'inet_addr'?
215 | seq_printf(m, " %-40pI6c", &chan->conn->inet6_addr);
| ^~~~~~~~~~
| inet_addr
Rearrange the condition to allow adding a simple preprocessor conditional.
Fixes: b38f99c1217a ("ksmbd: add procfs interface for runtime monitoring and statistics")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a unbalanced lock/unlock to gpusvm notifier lock:
[ 931.045868] =====================================
[ 931.046509] WARNING: bad unlock balance detected!
[ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U
[ 931.048150] -------------------------------------
[ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at:
[ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper]
[ 931.050802] but there are no more locks to release!
[ 931.051463]
The drm_gpusvm_notifier_unlock() sits under err_free label and the
first jump to err_free is just before calling the
drm_gpusvm_notifier_lock() causing unbalanced unlock.
Fixes: f1d08a586482 ("drm/gpusvm: Introduce a function to scan the current migration state")
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260209123433.1271053-1-maciej.patelczyk@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Module signing:
- Remove SHA-1 support for signing modules.
SHA-1 is no longer considered secure for signatures due to
vulnerabilities that can lead to hash collisions. None of the major
distributions use SHA-1 anymore, and the kernel has defaulted to
SHA-512 since v6.11.
Note that loading SHA-1 signed modules is still supported.
- Update scripts/sign-file to use only the OpenSSL CMS API for
signing.
As SHA-1 support is gone, we can drop the legacy PKCS#7 API which
was limited to SHA-1. This also cleans up support for legacy
OpenSSL versions.
Cleanups and fixes:
- Use system_dfl_wq instead of the per-cpu system_wq following the
ongoing workqueue API refactoring.
- Avoid open-coded kvrealloc() in module decompression logic by using
the standard helper.
- Improve section annotations by replacing the custom __modinit with
__init_or_module and removing several unused __INIT*_OR_MODULE
macros.
- Fix kernel-doc warnings in include/linux/moduleparam.h.
- Ensure set_module_sig_enforced is only declared when module signing
is enabled.
- Fix gendwarfksyms build failures on 32-bit hosts.
MAINTAINERS:
- Update the module subsystem entry to reflect the maintainer
rotation and update the git repository link"
* tag 'modules-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
modules: moduleparam.h: fix kernel-doc comments
module: Only declare set_module_sig_enforced when CONFIG_MODULE_SIG=y
module/decompress: Avoid open-coded kvrealloc()
gendwarfksyms: Fix build on 32-bit hosts
sign-file: Use only the OpenSSL CMS API for signing
module: Remove SHA-1 support for module signing
module: replace use of system_wq with system_dfl_wq
params: Replace __modinit with __init_or_module
module: Remove unused __INIT*_OR_MODULE macros
MAINTAINERS: Update module subsystem maintainers and repository
|
