| Age | Commit message (Collapse) | Author | Lines |
|---|
|
i40e advertises IFF_SUPP_NOFCS, allowing users to use the SO_NOFCS
socket option. However, this option is silently ignored, as the driver
does not check skb->no_fcs, and always enables FCS insertion offload.
Fix this by removing the advertisement of IFF_SUPP_NOFCS.
This behavior can be reproduced with a simple AF_PACKET socket:
import socket
s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW)
s.setsockopt(socket.SOL_SOCKET, 43, 1) # SO_NOFCS
s.bind(("eth0", 0))
s.send(b'\xff' * 64)
Previously, send() succeeds but the driver ignores SO_NOFCS.
With this change, send() fails with -EPROTONOSUPPORT, as expected.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-9-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without
clearing ICE_TX_RING_FLAGS_TXTIME bit.
When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent
ice_setup_tx_ring() call fails, a NULL pointer dereference could happen
in the unwinding sequence:
ice_clean_tx_ring()
-> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set)
-> ice_free_tx_tstamp_ring()
-> ice_free_tstamp_ring()
-> tstamp_ring->desc (NULL deref)
Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue.
Note that this potential issue is found by manual code review.
Compile test only since unfortunately I don't have E830 devices.
Fixes: ccde82e90946 ("ice: add E830 Earliest TxTime First Offload support")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-8-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME
Fixes: ccde82e909467 ("ice: add E830 Earliest TxTime First Offload support")
Signed-off-by: Keita Morisaki <kmta1236@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-7-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting PHY configuration during driver initialization, 200G link
speed is not being advertised even when the PHY is capable. This is
because the get PHY capabilities link speed response is being masked by
ICE_AQ_LINK_SPEED_M, which does not include the 200G link speed bit.
ICE_AQ_LINK_SPEED_200GB is defined as BIT(11), but the mask 0x7FF only
covers bits 0-10. Fix ICE_AQ_LINK_SPEED_M to use GENMASK(11, 0) so
that it covers all defined link speed bits including 200G.
Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-6-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 1a3571b5938c ("ice: restore PHY settings on media insertion")
introduced separate flows for setting PHY configuration on media
present: ice_configure_phy() when link-down-on-close is disabled, and
ice_force_phys_link_state() when enabled. The latter incorrectly uses
the previous configuration even after module change, causing link
issues such as wrong speed or no link.
Unify PHY configuration into a single ice_phy_cfg() function with a
link_en parameter, ensuring PHY capabilities are always fetched fresh
from hardware.
Fixes: 1a3571b5938c ("ice: restore PHY settings on media insertion")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-5-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any.
Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Assisted-by: Claude:claude-4.6-opus-high Cursor
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-4-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to
aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev).
The device release callback ice_sf_dev_release() frees sf_dev, but
the current error path falls through to sf_dev_free and calls
kfree(sf_dev) again, causing a double free.
Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but
avoid falling through to sf_dev_free after auxiliary_device_uninit().
Fixes: 13acc5c4cdbe ("ice: subfunction activation and base devlink ops")
Cc: stable@vger.kernel.org
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-3-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update MAC Rx/Tx offset registers settings (PHY_MAC_[RX|TX]_OFFSET
registers) with the data obtained with the latest research. It applies
to PCS latency settings for the following speeds/modes:
* 10Gb NO-FEC
- TX latency changed from 71.25 ns to 73 ns
- RX latency changed from -25.6 ns to -28 ns
* 25Gb NO-FEC
- TX latency changed from 28.17 ns to 33 ns
- RX latency changed from -12.45 ns to -12 ns
* 25Gb RS-FEC
- TX latency changed from 64.5 ns to 69 ns
- RX latency changed from -3.6 ns to -3 ns
The original data came from simulation and pre-production hardware.
The new data measures the actual delays and as such is more accurate.
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Co-developed-by: Zoltan Fodor <zoltan.fodor@intel.com>
Signed-off-by: Zoltan Fodor <zoltan.fodor@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-2-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix incorrect 'adjust the timer' programming sequence for E830 devices
series. Only shadow registers GLTSYN_SHADJ were programmed in the
current implementation. According to the specification [1], write to
command GLTSYN_CMD register is also required with CMD field set to
"Adjust the Time" value, for the timer adjustment to take the effect.
The flow was broken for the adjustment less than S32_MAX/MIN range
(around +/- 2 seconds). For bigger adjustment, non-atomic programming
flow is used, involving set timer programming. Non-atomic flow is
implemented correctly.
Testing hints:
Run command:
phc_ctl /dev/ptpX get adj 2 get
Expected result:
Returned timestamps differ at least by 2 seconds
[1] Intel® Ethernet Controller E830 Datasheet rev 1.3, chapter 9.7.5.4
https://cdrdv2.intel.com/v1/dl/getContent/787353?explicitVersion=true
Fixes: f00307522786 ("ice: Implement PTP support for E830 devices")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-1-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antonio Quartulli says:
====================
This batch includes only fixes to the selftest harness:
* switch to TAP test orchestration
* parse slurped notifications as returned by jq -s
* add ovpn_ prefix to helpers and global variables to avoid clashes
* fail test in case of netlink notification mismatch
* add missing kernel config dependencies
* add delay when launching multiple ynl/cli.py listeners
* tag 'ovpn-net-20260417' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: serialize YNL listener startup
selftests: ovpn: align command flow with TAP
selftests: ovpn: add prefix to helpers and shared variables
selftests: ovpn: flatten slurped notification JSON before filtering
selftests: ovpn: fail notification check on mismatch
selftests: ovpn: add nftables config dependencies for test-mark
====================
Link: https://patch.msgid.link/20260417090305.2775723-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- A fix to make modules on 32-bit parisc architecture work again
- Drop ip_fast_csum() inline assembly to avoid unaligned memory
accesses
- Allow to build kernel without 32-bit VDSO
- Reference leak fix in error path in LED driver
* tag 'parisc-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: fix reference leak on failed device registration
module.lds.S: Fix modules on 32-bit parisc architecture
parisc: Allow to build without VDSO32
parisc: Include 32-bit VDSO only when building for 32-bit or compat mode
parisc: Allow to disable COMPAT mode on 64-bit kernel
parisc: Fix default stack size when COMPAT=n
parisc: Fix signal code to depend on CONFIG_COMPAT instead of CONFIG_64BIT
parisc: is_compat_task() shall return false for COMPAT=n
parisc: Avoid compat syscalls when COMPAT=n
parisc: _llseek syscall is only available for 32-bit userspace
parisc: Drop ip_fast_csum() inline assembly implementation
parisc: update outdated comments for renamed ccio_alloc_consistent()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- improve debuggability of reserve_mem kernel parameter handling with
print outs in case of a failure and debugfs info showing what was
actually reserved
- Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/alternative: delay freeing of smp_locks section
memblock: warn when freeing reserved memory before memory map is initialized
memblock, treewide: make memblock_free() handle late freeing
memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
memblock: extract page freeing from free_reserved_area() into a helper
memblock: make free_reserved_area() more robust
mm: move free_reserved_area() to mm/memblock.c
powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
memblock: move reserve_bootmem_range() to memblock.c and make it static
memblock: Add reserve_mem debugfs info
memblock: Print out errors on reserve_mem parser
|
|
Eric Dumazet says:
====================
tcp: take care of tcp_get_timestamping_opt_stats() races
tcp_get_timestamping_opt_stats() does not own the socket lock,
this is intentional.
It calls tcp_get_info_chrono_stats() while other threads could
change chrono fields in tcp_chrono_set(). It also reads many
tcp socket fields that can be modified by other cpus/threads.
I do not think we need coherent TCP socket state snapshot
in tcp_get_timestamping_opt_stats().
Add READ_ONCE()/WRITE_ONCE() or data_race() annotations.
Note that icsk_ca_state is a bitfield, thus not covered
in this series.
====================
Link: https://patch.msgid.link/20260416200319.3608680-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While not the default case, multiple tests can be run simultaneously.
Then, data_ready being a global variable will be overwritten and the
per-instance lock will not help. Turn the global variable into a
per-instance one to avoid this problem.
Fixes: e339c80af95e ("mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 29c1c44646ae ("tcp: add u32 counter in tcp_sock and an SNMP counter for PLB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-15-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The waitqueue must be initialized before the debugfs files are created
because from that time, requests from userspace can already be made.
Similarily, drvdata and spinlock needs to be initialized before we
request the channel, otherwise dangling irqs might run into problems
like a NULL pointer exception.
Fixes: 8ea4484d0c2b ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The RX channel can be aliased to the TX channel if it has a different
MMIO. This special case needs to be handled when freeing the channels
otherwise a double-free occurs.
Fixes: 8ea4484d0c2b ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
mbox_test_request_channel() returns either an ERR_PTR or NULL. The
callers, however, mostly checked for non-NULL which allows for bogus
code paths when an ERR_PTR is treated like a valid channel. A later
commit tried to fix it in one place but missed the other ones. Because
the ERR_PTR is only used for -ENOMEM once and is converted to
-EPROBE_DEFER anyhow, convert the callee to only return NULL which
simplifies handling a lot and makes it less error prone.
Fixes: 8ea4484d0c2b ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Fixes: 9b63a810c6f9 ("mailbox: mailbox-test: Fix an error check in mbox_test_probe()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() annotations to keep KCSAN happy.
WRITE_ONCE() annotations are already present.
Fixes: e08ab0b377a1 ("tcp: add bytes not sent to SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-14-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 32efcc06d2a1 ("tcp: export count for rehash attempts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: e8bd8fca6773 ("tcp: add SRTT to SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7ec65372ca53 ("tcp: add stat of data packet reordering events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7e10b6554ff2 ("tcp: add dsack blocks received stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: fb31c9b9f6c8 ("tcp: add data bytes retransmitted stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: ba113c3aa79a ("tcp: add data bytes sent stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 87ecc95d81d9 ("tcp: add send queue size stat in SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: feb5f2ec6464 ("tcp: export packets delivery info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7156d194a077 ("tcp: add snd_ssthresh stat in SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE(), WRITE_ONCE() data_race() annotations to keep KCSAN happy.
Fixes: bb7c19f96012 ("tcp: add related fields into SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7e98102f4897 ("tcp: record pkts sent and retransmistted")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_get_timestamping_opt_stats() does not own the socket lock,
this is intentional.
It calls tcp_get_info_chrono_stats() while other threads could
change chrono fields in tcp_chrono_set().
I do not think we need coherent TCP socket state snapshot
in tcp_get_timestamping_opt_stats(), I chose to only
add annotations to keep KCSAN happy.
Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add field for missing lock around the hrtimer. Add 'Required' where
the core checks for valid entries.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Fail gracefully if there is no channel array attached to the mailbox
controller. Otherwise the later dereference will cause an OOPS which
might not be seen because mailbox controllers might instantiate very
early. Remove the comment explaining the obvious while here.
Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
smb2_get_ea() applies 4-byte alignment padding via memset() after
writing each EA entry. The bounds check on buf_free_len is performed
before the value memcpy, but the alignment memset fires unconditionally
afterward with no check on remaining space.
When the EA value exactly fills the remaining buffer (buf_free_len == 0
after value subtraction), the alignment memset writes 1-3 NUL bytes
past the buf_free_len boundary. In compound requests where the response
buffer is shared across commands, the first command (e.g., READ) can
consume most of the buffer, leaving a tight remainder for the QUERY_INFO
EA response. The alignment memset then overwrites past the physical
kvmalloc allocation into adjacent kernel heap memory.
Add a bounds check before the alignment memset to ensure buf_free_len
can accommodate the padding bytes.
This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix
potencial OOB in get_file_all_info() for compound requests") and
commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound
requests"), both of which added bounds checks before unconditional
writes in QUERY_INFO response handlers.
Cc: stable@vger.kernel.org
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes
in u16 variables. When a file has many POSIX ACL entries, the
accumulated size can wrap past 65535, causing the pointer arithmetic
(char *)pndace + *size to land within already-written ACEs. Subsequent
writes then overwrite earlier entries, and pndacl->size gets a
truncated value.
Use check_add_overflow() at each accumulation point to detect the
wrap before it corrupts the buffer, consistent with existing
check_mul_overflow() usage elsewhere in smbacl.c.
Cc: stable@vger.kernel.org
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns.
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Signed-off-by: Akif <akif.sait111@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The global max_connections check in ksmbd's TCP accept path counts
the newly accepted connection with atomic_inc_return(), but then
rejects the connection when the result is greater than or equal to
server_conf.max_connections.
That makes the effective limit one smaller than configured. For
example:
- max_connections=1 rejects the first connection
- max_connections=2 allows only one connection
The per-IP limit in the same function uses <= correctly because it
counts only pre-existing connections. The global limit instead checks
the post-increment total, so it should reject only when that total
exceeds the configured maximum.
Fix this by changing the comparison from >= to >, so exactly
max_connections simultaneous connections are allowed and the next one
is rejected. This matches the documented meaning of max_connections
in fs/smb/server/ksmbd_netlink.h as the "Number of maximum simultaneous
connections".
Fixes: 0d0d4680db22 ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ipc_validate_msg() computes the expected message size for each
response type by adding (or multiplying) attacker-controlled fields
from the daemon response to a fixed struct size in unsigned int
arithmetic. Three cases can overflow:
KSMBD_EVENT_RPC_REQUEST:
msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
KSMBD_EVENT_SHARE_CONFIG_REQUEST:
msg_sz = sizeof(struct ksmbd_share_config_response) +
resp->payload_sz;
KSMBD_EVENT_LOGIN_REQUEST_EXT:
msg_sz = sizeof(struct ksmbd_login_response_ext) +
resp->ngroups * sizeof(gid_t);
resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition
can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes
signed and size_t, so a negative ngroups is converted to SIZE_MAX
before the multiply. A wrapped value of msg_sz that happens to
equal entry->msg_sz bypasses the size check on the next line, and
downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz,
kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the
unverified length.
Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST
paths to detect integer overflow without constraining functional
payload size; userspace ksmbd-tools grows NDR responses in 4096-byte
chunks for calls like NetShareEnumAll, so a hard transport cap is
unworkable on the response side. For LOGIN_REQUEST_EXT, reject
resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and
report the error from ipc_validate_msg() so it fires at the IPC
boundary; with that bound the subsequent multiplication and addition
stay well below UINT_MAX. The now-redundant ngroups check and
pr_err in ksmbd_alloc_user() are removed.
This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix
integer overflows on 32 bit systems"), which hardened the request
side.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Fixes: a77e0e02af1c ("ksmbd: add support for supplementary groups")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept.
Fixes: 0d0d4680db22 ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"The biggest news in this pull request is that it will start the last
cycle of me handling the I2C subsystem. From 7.2. on, I will pass
maintainership to Andi Shyti who has been maintaining the I2C drivers
for a while now and who has done a great job in doing so.
We will use this cycle for a hopefully smooth transition. Thanks must
go to Andi for stepping up! I will still be around for guidance.
Updates:
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support"
* tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (40 commits)
i2c: usbio: Add ACPI device-id for NVL platforms
i2c: qcom-geni: Avoid extra TX DMA TRE for single read message in GPI mode
i2c: atr: use kzalloc_flex
i2c: spacemit: introduce pio for k1
i2c: spacemit: move i2c_xfer_msg()
i2c: xiic: skip input clock setup on non-OF systems
i2c: xiic: use numbered adapter registration
i2c: xiic: cosmetic: use resource format specifier in debug log
i2c: xiic: cosmetic cleanup
i2c: xiic: switch to generic device property accessors
i2c: xiic: remove duplicate error message
i2c: xiic: switch to devres managed APIs
i2c: rtl9300: add RTL9607C i2c controller support
i2c: rtl9300: introduce new function properties to driver data
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support
i2c: rtl9300: introduce a property for 8 bit width reg address
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: split data_reg into read and write reg
...
|
|
Pull ipmi updates from Corey Minyard:
"Small updates and fixes (mostly to the BMC software):
- Fix one issue in the host side driver where a kthread can be left
running on a specific memory allocation failre at probe time
- Replace system_wq with system_percpu_wq so system_wq can eventually
go away"
* tag 'for-linus-7.1-1' of https://github.com/cminyard/linux-ipmi:
ipmi:ssif: Clean up kthread on errors
ipmi:ssif: Remove unnecessary indention
ipmi: ssif_bmc: Fix KUnit test link failure when KUNIT=m
ipmi: ssif_bmc: add unit test for state machine
ipmi: ssif_bmc: change log level to dbg in irq callback
ipmi: ssif_bmc: fix message desynchronization after truncated response
ipmi: ssif_bmc: fix missing check for copy_to_user() partial failure
ipmi: ssif_bmc: cancel response timer on remove
ipmi: Replace use of system_wq with system_percpu_wq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf report:
- Add 'comm_nodigit' sort key to combine similar threads that only
have different numbers in the comm. In the following example, the
'comm_nodigit' will have samples from all threads starting with
"bpfrb/" into an entry "bpfrb/<N>".
$ perf report -s comm_nodigit,comm -H
...
#
# Overhead CommandNoDigit / Command
# ........... ........................
#
20.30% swapper
20.30% swapper
13.37% chrome
13.37% chrome
10.07% bpfrb/<N>
7.47% bpfrb/0
0.70% bpfrb/1
0.47% bpfrb/3
0.46% bpfrb/2
0.25% bpfrb/4
0.23% bpfrb/5
0.20% bpfrb/6
0.14% bpfrb/10
0.07% bpfrb/7
- Support flat layout for symfs. The --symfs option is to specify the
location of debugging symbol files. The default 'hierarchy' layout
would search the symbol file using the same path of the original
file under the symfs root. The new 'flat' layout would search only
in the root directory.
- Update 'simd' sort key for ARM SIMD flags to cover ASE/SME and more
predicate flags.
perf stat:
- Add --pmu-filter option to select specific PMUs. This would be
useful when you measure metrics from multiple instance of uncore
PMUs with similar names.
# perf stat -M cpa_p0_avg_bw
Performance counter stats for 'system wide':
19,417,779,115 hisi_sicl0_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl0_cpa0/cpa_p0_wr_dat/
0 hisi_sicl0_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl0_cpa0/cpa_p0_rd_dat_32b/
19,417,751,103 hisi_sicl10_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl10_cpa0/cpa_p0_wr_dat/
0 hisi_sicl10_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl10_cpa0/cpa_p0_rd_dat_32b/
19,417,730,679 hisi_sicl2_cpa0/cpa_cycles/ # 0.31 cpa_p0_avg_bw
75,635,749 hisi_sicl2_cpa0/cpa_p0_wr_dat/
18,520,640 hisi_sicl2_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl2_cpa0/cpa_p0_rd_dat_32b/
19,417,674,227 hisi_sicl8_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl8_cpa0/cpa_p0_wr_dat/
0 hisi_sicl8_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl8_cpa0/cpa_p0_rd_dat_32b/
19.417734480 seconds time elapsed
With --pmu-filter, users can select only hisi_sicl2_cpa0 PMU.
# perf stat --pmu-filter hisi_sicl2_cpa0 -M cpa_p0_avg_bw
Performance counter stats for 'system wide':
6,234,093,559 cpa_cycles # 0.60 cpa_p0_avg_bw
50,548,465 cpa_p0_wr_dat
7,552,182 cpa_p0_rd_dat_64b
0 cpa_p0_rd_dat_32b
6.234139320 seconds time elapsed
Data type profiling:
- Quality improvements by tracking register state more precisely
- Ensure array members to get the type
- Handle more cases for global variables
Vendor event/metric updates:
- Update various Intel events and metrics
- Add NVIDIA Tegra 410 Olympus events
Internal changes:
- Verify perf.data header for maliciously crafted files
- Update perf test to cover more usages and make them robust
- Move a couple of copied kernel headers not to annoy objtool build
- Fix a bug in map sorting in name order
- Remove some unused codes
Misc:
- Fix module symbol resolution with non-zero text address
- Add -t/--threads option to `perf bench mem mmap`
- Track duration of exit*() syscall by `perf trace -s`
- Add core.addr2line-timeout and core.addr2line-disable-warn config
items"
* tag 'perf-tools-for-v7.1-2026-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (131 commits)
perf loongarch: Fix build failure with CONFIG_LIBDW_DWARF_UNWIND
perf annotate: Use jump__delete when freeing LoongArch jumps
perf test: Fixes for check branch stack sampling
perf test: Fix inet_pton probe failure and unroll call graph
perf build: fix "argument list too long" in second location
perf header: Add sanity checks to HEADER_BPF_BTF processing
perf header: Sanity check HEADER_BPF_PROG_INFO
perf header: Sanity check HEADER_PMU_CAPS
perf header: Sanity check HEADER_HYBRID_TOPOLOGY
perf header: Sanity check HEADER_CACHE
perf header: Sanity check HEADER_GROUP_DESC
perf header: Sanity check HEADER_PMU_MAPPINGS
perf header: Sanity check HEADER_MEM_TOPOLOGY
perf header: Sanity check HEADER_NUMA_TOPOLOGY
perf header: Sanity check HEADER_CPU_TOPOLOGY
perf header: Sanity check HEADER_NRCPUS and HEADER_CPU_DOMAIN_INFO
perf header: Bump up the max number of command line args allowed
perf header: Validate nr_domains when reading HEADER_CPU_DOMAIN_INFO
perf sample: Fix documentation typo
perf arm_spe: Improve SIMD flags setting
...
|
|
CONFIG_FIRMWARE_EDID=y depends on X86 or EFI_GENERIC_STUB. Neither
is true here, so drop the lines from the defconfig files.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
AT_SYSINFO_EHDR defines the auxvector index representing the vDSO
entrypoint. Its value or presence does not depend on whether a vDSO
is actually provided by the kernel.
The definition of AT_SYSINFO_EHDR was gated between CONFIG_VSYSCALL to
avoid a default gate VMA to be created. However that default gate VMA
was removed entirely in commit a6c19dfe3994
("arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area").
Remove the now unnecessary conditional.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Both platform_early.c and platform_early.h have an extra dash in
their SPDX-License-Identifier lines. Use the correct (single-dash)
syntax for these lines.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Include <linux/io.h> to avoid depending on <linux/backlight.h>
for including it. Declares __raw_readb() and __raw_writeb().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510282206.wI0HrqcK-lkp@intel.com/
Fixes: 243ce64b2b37 ("backlight: Do not include <linux/fb.h> in header file")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Thompson (RISCstar) <danielt@kernel.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <danielt@kernel.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
The EL2 code defines ranges of host hypercalls that are either
enabled at boot-time only, used by [nh]VHE KVM, or reserved to pKVM.
The way these ranges are delineated is error prone, as the enum symbols
defining the limits are expressed in terms of actual function symbols.
This means that should a new function be added, special care must be
taken to also update the limit symbol.
Improve this by reusing the mechanism introduced for the vcpu_sysreg
enum, which uses a MARKER() macro and some extra trickery to make
the limit symbol standalone. Crucially, the limit symbol has the
same value as the *following* symbol.
The handle_host_hcall() function is then updated to make use of
the new limit definitions and get rid of the brittle default
upper limit. This allows for some more strict checks at build
time, and the removal of an comparison at run time.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260414160528.2218858-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add myself as a page cache reviewer since I tend to review changes in
these areas anyway.
[akpm@linux-foundation.org: add linux-mm@kvack.org]
Link: https://lore.kernel.org/20260415174039.13016-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Lorenzo Stoakes <ljs@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
