| Age | Commit message (Collapse) | Author | Lines |
|---|
|
On the 32-bit parisc architecture, we always used the
-ffunction-sections compiler option to tell the compiler to put the
functions into seperate text sections. This is necessary, otherwise
"big" kernel modules like ext4 or ipv6 fail to load because some
branches won't be able to reach their stubs.
Commit 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related
macros") broke this for parisc because all text sections will get
unconditionally merged now.
Introduce the ARCH_WANTS_MODULES_TEXT_SECTIONS config option which
avoids the text section merge for modules, and fix this issue by
enabling this option by default for 32-bit parisc.
Fixes: 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros")
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org # v6.19+
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When building for 64-bit and without CONFIG_COMPAT, leave out the
vdso32 binary.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Although we don't yet have a 64-bit userspace, allowing to disable
the compat mode should be possible.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The CONFIG_STACK_MAX_DEFAULT_SIZE_MB config option does not exist
when CONFIG_COMPAT is disabled. Use default 1 GB stack in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The signal handler code used CONFIG_64BIT to decide if compat handling
code should be compiled in. Fix it to use CONFIG_COMPAT instead.
This allows to disable CONFIG_COMPAT even when running a 64-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Drop unnecessary code and syscall tables when we run a 64-bit
kernel with conpat mode disabled.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Zen1's hardware divider can leave, under certain circumstances, partial
results from previous operations. Those results can be leaked by
another, attacker thread.
Fix that with a chicken bit.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running.
Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)")
Reported-by: Li Xiao <<252270051@hdu.edu.cn>
Cc: stable@vger.kernel.org
Reviewed-by: Li Xiao <252270051@hdu.edu.cn>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and
aen_host_forward() index the GAIT by manually multiplying the index
with sizeof(struct zpci_gaite).
Since aift->gait is already a struct zpci_gaite pointer, this
double-scales the offset, accessing element aisb*16 instead of aisb.
This causes out-of-bounds accesses when aisb >= 32 (with
ZPCI_NR_DEVICES=512)
Fix by removing the erroneous sizeof multiplication.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Fixes: 73f91b004321 ("KVM: s390: pci: enable host forwarding of Adapter Event Notifications")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Two allocations in __regmap_init_ram() are not cleaned up on failure.
If the kzalloc_objs() for data->written fails, data->read is returned
with no way for the caller to free it.
If __regmap_init() fails, neither data->read nor data->written is freed
because its error paths do not call bus->free_context() (which is
regmap_ram_free_context() here). Only regmap_exit() does, and that is
never reached on an init failure.
Free the allocated arrays before returning any error.
Fixes: f6352424e37e ("regmap: Add RAM backed register map")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260416235630.78408-1-dbgh9129@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The assembly code of ip_fast_csum() triggers unaligned access warnings
if the IP header isn't correctly aligned:
Kernel: unaligned access to 0x173d22e76 in inet_gro_receive+0xbc/0x2e8 (iir 0x0e8810b6)
Kernel: unaligned access to 0x173d22e7e in inet_gro_receive+0xc4/0x2e8 (iir 0x0e88109a)
Kernel: unaligned access to 0x173d22e82 in inet_gro_receive+0xc8/0x2e8 (iir 0x0e90109d)
Kernel: unaligned access to 0x173d22e7a in inet_gro_receive+0xd0/0x2e8 (iir 0x0e9810b8)
Kernel: unaligned access to 0x173d22e86 in inet_gro_receive+0xdc/0x2e8 (iir 0x0e8810b8)
We have the option to a) ignore the warnings, b) work around it by
adding more code to check for alignment, or c) to switch to the generic
implementation and rely on the compiler to optimize the code.
Let's go with c), because a) isn't nice, and b) would effectively lead
to an implementation which is basically equal to c).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v7.0+
|
|
The function ccio_alloc_consistent() was renamed to ccio_alloc() by commit
79387179e2e4 ("parisc: convert to dma_map_ops"). Update the three stale
references in ccio-dma.c.
Also replace the obsolete PCI_DMA_TODEVICE constant name with DMA_TO_DEVICE in
a nearby comment to match the code.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Commit 2cd8231796b5 ("mm/slub: allow to set node and align in
k[v]realloc") introduced the ability to force a reallocation if the
original object does not satisfy new alignment or NUMA node, even when
the object is being shrunk.
This introduced two bugs in the reallocation fallback path:
1. Data loss during NUMA migration: The jump to 'alloc_new' happens
before 'ks' and 'orig_size' are initialized. As a result, the
memcpy() in the 'alloc_new' block would copy 0 bytes into the new
allocation.
2. Buffer overflow during shrinking: When shrinking an object while
forcing a new alignment, 'new_size' is smaller than the old size.
However, the memcpy() used the old size ('orig_size ?: ks'), leading
to an out-of-bounds write.
The same overflow bug exists in the kvrealloc() fallback path, where the
old bucket size ksize(p) is copied into the new buffer without being
bounded by the new size.
A simple reproducer:
// e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW
while (1) {
void *p = kmalloc(128, GFP_KERNEL);
p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE);
kfree(p);
}
demonstrates the issue:
==================================================================
BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130
Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47):
memcpy_orig+0x68/0x130
krealloc_node_align_noprof+0x1c8/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64
allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago):
krealloc_node_align_noprof+0x19c/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
==================================================================
Fix it by moving the old size calculation to the top of __do_krealloc()
and bounding all copy lengths by the new allocation size.
Fixes: 2cd8231796b5 ("mm/slub: allow to set node and align in k[v]realloc")
Cc: stable@vger.kernel.org
Reported-by: https://sashiko.dev/#/patchset/20260415143735.2974230-1-elver%40google.com
Signed-off-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260416132837.3787694-1-elver@google.com
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Starting one background YNL notification listener per peer back-to-back
can intermittently stall the test setup before the listeners even reach
the Python main function.
This was reproducible in a reduced test.sh setup-only loop: a single
listener stayed stable across repeated runs, while starting listeners
for all peers could hang early in the listener launch phase. Adding a
short delay between listener launches makes the listeners start cleanly
and eliminates the reproduced hangs in repeated normal and slow-runner
tests.
Serialize listener startup with a small sleep between setup_listener
calls.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Current tests do not properly adhere to the TAP infrastructure
therefore they do not properly report failures leading to hangs of
the CI machinery.
Restructure ovpn selftests into using the TAP infrastructure: split each
test in stages, execute stage bodies with fail-fast semantics, and emit
KTAP pass/fail for each stage.
Centralize behavior control in common.sh and makes the scripts use
dedicated wrappers for required-success, expected-failure, and non-fatal
commands. Also add the OVPN_VERBOSE mode that exposes captured command
output for debugging.
This way tests won't hang anymore in case of failure when executed
within the CI machinery.
This change also makes default OVPN_CLI and YNL resolution
independent from the caller CWD by anchoring both to COMMON_DIR, so
behavior is stable across direct execution and run_tests-style
execution.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Current naming for shared variables, helpers and netnamespaces is
a bit unfortunate as it doesn't come with a clean prefix.
This showed to be problematic in case of name clashes with external
scripts or in case of abrupt test termination (hanging netns' weren't
easily reconducible to ovpn).
Rename common helper entry points and all shared globals in the ovpn
selftests to ovpn_ or OVPN_ names so test scripts and wrappers use a
single explicit prefix. Also rename the temporary network namespaces
created by the tests from peerN to ovpn_peerN. This makes leaked
namespaces easier to identify.
This is a mechanical refactor only, behavior is unchanged.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Notification comparison uses jq -s, which slurps all inputs into an
array. Some inputs can be arrays themselves, and applying the .msg.peer
filter directly on those entries triggers jq type errors.
Expand any array-valued JSON items returned by jq -s before selecting
.msg.peer, so the filter handles both normal notification objects and []
entries without type errors.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
compare_ntfs doesn't fail when expected and received notification
streams diverge.
Fix this bug by tracking the diff exit status explicitly and return it
to the caller so notification mismatches propagate as test failures.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
test-mark.sh installs nftables rules in an inet/filter output chain and
verifies packet drops via nft counters. In vmksft this can fail when the
nftables core is not enabled by the ovpn selftest config.
Add the missing kernel options required by this test:
- CONFIG_NETFILTER
- CONFIG_NF_TABLES
- CONFIG_NF_TABLES_INET
Fixes: 7b80d8a33500 ("selftests: ovpn: add test for the FW mark feature")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260319124114.42f91f72@kernel.org/
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
acomp_save_req() stores &req->chain in req->base.data. When
acomp_reqchain_done() is invoked on asynchronous completion, it receives
&req->chain as the data argument but casts it directly to struct
acomp_req. Since data points to the chain member, all subsequent field
accesses are at a wrong offset, resulting in memory corruption.
The issue occurs when an asynchronous hardware implementation, such as
the QAT driver, completes a request that uses the DMA virtual address
interface (e.g. acomp_request_set_src_dma()). This combination causes
crypto_acomp_compress() to enter the acomp_do_req_chain() path, which
sets acomp_reqchain_done() as the completion callback via
acomp_save_req().
With KASAN enabled, this manifests as a general protection fault in
acomp_reqchain_done():
general protection fault, probably for non-canonical address 0xe000040000000000
KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007]
RIP: 0010:acomp_reqchain_done+0x15b/0x4e0
Call Trace:
<IRQ>
qat_comp_alg_callback+0x5d/0xa0 [intel_qat]
adf_ring_response_handler+0x376/0x8b0 [intel_qat]
adf_response_handler+0x60/0x170 [intel_qat]
tasklet_action_common+0x223/0x820
handle_softirqs+0x1ab/0x640
</IRQ>
Fix this by storing the request itself in req->base.data instead of
&req->chain, so that acomp_reqchain_done() receives the correct pointer.
Simplify acomp_restore_req() accordingly to access req->chain directly.
Fixes: 64929fe8c0a4 ("crypto: acomp - Remove request chaining")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path.
Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ruide Cao <caoruide123@gmail.com>
Signed-off-by: Yilin Zhu <zylzyl2333@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When platform_device_register() fails in mod_init(), the embedded struct
device in pcmtst_pdev has already been initialized by
device_initialize(), but the failure path returns the error without
dropping the device reference for the current platform device:
mod_init()
-> platform_device_register(&pcmtst_pdev)
-> device_initialize(&pcmtst_pdev.dev)
-> setup_pdev_dma_masks(&pcmtst_pdev)
-> platform_device_add(&pcmtst_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before returning the error.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fixes: 315a3d57c64c5 ("ALSA: Implement the new Virtual PCM Test Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260415193138.3861297-1-lgs201920130244@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
usb6fire_control_input_vol_put() stores the analog capture volume
as a signed offset in rt->input_vol[] (-15..+15), but it compares
the cached value against the user-visible mixer value (0..30)
before subtracting 15.
This mixes two domains in the change detection path. Since the
runtime is zero-initialized, the visible default is 15; writing 0
right after probe is ignored, while writing 15 is reported as a
change even though the cached value remains 0.
Normalize the user value before comparing it with the cached offset.
Fixes: 06bb4e743501 ("ALSA: snd-usb-6fire: add analog input volume control")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260416-alsa-6fire-input-volume-change-detection-v1-1-ec78299168df@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The NexiGo N930W 60fps webcam (USB ID 3443:930d) hits the same
'cannot get freq at ep 0x84' error in snd-usb-audio as its sibling
N930AF (1bcf:2283). Without QUIRK_FLAG_GET_SAMPLE_RATE the ADC clock
is never configured and the microphone streams only zero samples.
Testing on Linux 6.17 with QUIRK_FLAG_GET_SAMPLE_RATE |
QUIRK_FLAG_MIC_RES_16 (via quirk_alias=3443930d:1bcf2283) confirmed
the microphone captures real audio after a cold USB re-enumeration.
Adding a native quirk_flags_table entry avoids the alias workaround.
Signed-off-by: Johnathan Penberthy <johnathan.penberthy@gmail.com>
Link: https://patch.msgid.link/20260417010123.3080904-1-johnathan.penberthy@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the correct function name to avoid a kernel-doc warning (when
W=1 is used):
vx_cmd.h:210: warning: expecting prototype for vx_send_pipe_cmd_params().
Prototype was for vx_set_pipe_cmd_params() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260216060010.2784438-1-rdunlap@infradead.org
|
|
Drop a kernel-doc struct comment since the struct member was removed.
This eliminates a kernel-doc warning when make W=1 is used.
virtio_pcm.h:65: warning: Excess struct member 'msg_last_enqueued'
description in 'virtio_pcm_substream'
Fixes: fe981e67568c ("ALSA: virtio: use ack callback")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260216055956.2784399-1-rdunlap@infradead.org
|
|
Add quirk entry for SmartlinkTechnology M01 USB microphone to enable
the standard mixer interface.
Signed-off-by: Juan Pablo Fuentealba Bizama <jpfuentealbabizama@gmail.com>
Link: https://patch.msgid.link/20260416191149.12088-1-jpfuentealbabizama@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
dma-buf:
- fix documentation formatting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260417061430.GA11880@linux.fritz.box
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several fixes:
- Add missing static const
- Correct type 1 emulation for VFIO_CHECK_EXTENSION when no-iommu is
turned on
- Fix selftest memory leak and syzkaller splat
- Fix missed -EFAULT in fault reporting write() fops
- Fix a race where map/unmap with the internal IOVA allocator can
unmap things it should not"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix a race with concurrent allocation and unmap
iommufd/selftest: Remove MOCK_IOMMUPT_AMDV1 format
iommufd: Fix return value of iommufd_fault_fops_write()
iommufd: update outdated comment for renamed iommufd_hw_pagetable_alloc()
iommufd/selftest: Fix page leaks in mock_viommu_{init,destroy}
iommufd: vfio compatibility extension check for noiommu mode
iommufd: Constify struct dma_buf_attach_ops
|
|
When calling cifs_mount_get_tcon() with SMB1 UNIX mounts,
@cifs_sb->mnt_cifs_flags needs to be read or updated only after
calling reset_cifs_unix_caps(), otherwise it might end up with missing
CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits.
This fixes the wrong dir separator used in paths caused by the missing
CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags.
Reported-by: "Kris Karas (Bug Reporting)" <bugs-a21@moonlit-rail.com>
Closes: https://lore.kernel.org/r/f758f4ff-4d54-4244-931d-38f469c3ff14@moonlit-rail.com
Fixes: 4fc3a433c139 ("smb: client: use atomic_t for mnt_cifs_flags")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl updates from Jason Gunthorpe:
- New fwctl driver for Broadcom RDMA NICs
- Bug fix for non-modular builds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
fwctl/bnxt_fwctl: Add documentation entries
fwctl/bnxt_fwctl: Add bnxt fwctl device
fwctl/bnxt_en: Create an aux device for fwctl
fwctl/bnxt_en: Refactor aux bus functions to be more generic
fwctl/bnxt_en: Move common definitions to include/linux/bnxt/
|
|
Pull SoC ARM code updates from Arnd Bergmann:
"These are again very minimal updates:
- A workaround for firmware on Google Nexus 10
- A fix for early debugging on OMAP1
- A rework for Microchip SoC configuration
- Cleanups on OMAP2 an R-Car-Gen2"
* tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
arm64: Kconfig: provide a top-level switch for Microchip platforms
ARM: shmobile: rcar-gen2: Use of_phandle_args_equal() helper
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
ARM: samsung: exynos5250: Allow CPU1 to boot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, we enable a number of additional device drivers as loadable
modules, to support the added platforms. The largest change this time
is for OMAP2/3, which were not that well supported in the generic
arm32 defconfig.
The Tegra SoC platforms are now enabled by default in Kconfig when
ARCH_TEGRA is enabled, which means the defconfig change is done at the
same time as the Kconfig change here"
* tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arch/arm: Drop CONFIG_FIRMWARE_EDID from defconfig files
arm64: defconfig: Enable DP83TG720 PHY driver
arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
arm64: defconfig: enable pci-pwrctrl-generic as module
arm64: defconfig: Enable Lontium LT8713sx driver
arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller
arm64: defconfig: enable IPQ5210 RDP504 base configs
arm64: defconfig: Enable Milos LPASS LPI pinctrl driver
arm64: defconfig: Enable Kaanapali clock controllers
arm64: defconfig: Enable configs for Arduino VENTUNO Q
arm64: defconfig: Enable Qualcomm Eliza basic resource providers
arm64: defconfig: Enable S5KJN1 camera sensor
arm64: defconfig: Enable configurations for Toradex Aquila AM69
arm64: defconfig: remove SENSORS_SA67MCU
arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module
arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs
ARM: shmobile: defconfig: Refresh for v7.0-rc1
arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
|
|
Recent changes to crypto and wifi made CMAC no longer
selected by default on x86 and tcp_ao needs it.
Add the missing config.
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260416010439.1053587-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luigi Leonardi says:
====================
vsock/virtio: fix MSG_PEEK calculation on bytes to copy
`virtio_transport_stream_do_peek`, when calculating the number of bytes to
copy, didn't consider the `offset`, caused by partial reads that happened
before.
This might cause out-of-bounds read that lead to an EFAULT.
More details in the commits.
Commit 1 introduces the fix
Commit 2 introduces some preliminary work for adding a test and fixes a
problem in existing tests.
Commit 3 introduces a test that checks for this bug to avoid future
regressions.
For disclosure: this bug was found initially by claude opus 4.6, I then analyzed
it and worked on the fix and the test.
====================
Link: https://patch.msgid.link/20260415-fix_peek-v4-0-8207e872759e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that verifies MSG_PEEK works correctly after a partial
recv().
This is to test a bug that was present in the
`virtio_transport_stream_do_peek()` when computing the number of bytes to
copy: After a partial read, the peek function didn't take into
consideration the number of bytes that were already read. So peeking the
whole buffer would cause an out-of-bounds read, that resulted in a -EFAULT.
This test does exactly this: do a partial recv on a buffer, then try to
peek the whole buffer content. The test re-uses
`test_stream_msg_peek_client()` to also cover this scenario.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260415-fix_peek-v4-3-8207e872759e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`recv_buf` does not handle the MSG_PEEK flag correctly: it keeps calling
`recv` until all requested bytes are available or an error occurs.
The problem is how it calculates the number of bytes read: MSG_PEEK
doesn't consume any bytes and will re-read the same bytes from the buffer
head, so summing the return value every time is wrong.
Moreover, MSG_PEEK doesn't consume the bytes in the buffer, so if more
bytes are requested than are available, the loop will never terminate,
because `recv` will never return EOF. For this reason, we need to compare
the number of bytes read with the number of bytes expected.
Add a check: if the MSG_PEEK flag is present, update the byte counter and
break out of the loop only after at least the expected number of bytes
have been received; otherwise, retry after a short delay to avoid
consuming too many CPU cycles.
This allows us to simplify the `test_stream_credit_update_test` by
reusing `recv_buf`, like some other tests already do.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260415-fix_peek-v4-2-8207e872759e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`virtio_transport_stream_do_peek()` does not account for the skb offset
when computing the number of bytes to copy.
This means that, after a partial recv() that advances the offset, a peek
requesting more bytes than are available in the sk_buff causes
`skb_copy_datagram_iter()` to go past the valid payload, resulting in
a -EFAULT.
The dequeue path already handles this correctly.
Apply the same logic to the peek path.
Fixes: 0df7cd3c13e4 ("vsock/virtio/vhost: read data from non-linear skb")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260415-fix_peek-v4-1-8207e872759e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wei Fang says:
====================
net: enetc: fix command BD ring issues
Currently, the implementation of command BD ring has two issues, one is
that the driver may obtain wrong consumer index of the ring, because the
driver does not mask out the SBE bit of the CIR value, so a wrong index
will be obtained when a SBE error ouccrs. The other one is that the DMA
buffer may be used after free. If netc_xmit_ntmp_cmd() times out and
returns an error, the pending command is not explicitly aborted, while
ntmp_free_data_mem() unconditionally frees the DMA buffer. If the buffer
has already been reallocated elsewhere, this may lead to silent memory
corruption. Because the hardware eventually processes the pending command
and perform a DMA write of the response to the physical address of the
freed buffer. So this patch set is to fix these two issues.
====================
Link: https://patch.msgid.link/20260415060833.2303846-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AI-generated review reported a potential DMA use-after-free issue
[1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending
command is not explicitly aborted, while ntmp_free_data_mem()
unconditionally frees the DMA buffer. If the buffer has already been
reallocated elsewhere, this may lead to silent memory corruption. Because
the hardware eventually processes the pending command and perform a DMA
write of the response to the physical address of the freed buffer.
To resolve this issue, this patch does the following modifications:
1. Convert cbdr->ring_lock from a spinlock to a mutex
The lock was originally a spinlock in case NTMP operations might be
invoked from atomic context. After downstream support for all NTMP
tables, no such usage has materialized. A mutex lock is now required
because the driver now needs to reclaim used BDs and release associated
DMA memory within the lock's context, while dma_free_coherent() might
sleep.
2. Introduce software command BD (struct netc_swcbd)
The hardware write-back overwrites the addr and len fields of the BD,
so the driver cannot rely on the hardware BD to free the associated DMA
memory. The driver now maintains a software shadow BD storing the DMA
buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only
reclaims older BDs when the number of used BDs reaches
NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory
release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no
longer needed and are removed.
3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd()
netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes
consuming the response. At this point, if a concurrent thread submits
a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer
while it is still in use. Move ring_lock ownership to the caller to
ensure the response buffer cannot be reclaimed prematurely. So the
helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added.
These changes eliminate the DMA use-after-free condition and ensure safe
and consistent BD reclamation and DMA buffer lifecycle management.
Fixes: 4701073c3deb ("net: enetc: add initial netc-lib driver to support NTMP")
Link: https://lore.kernel.org/netdev/20260403011729.1795413-1-kuba@kernel.org/ # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260415060833.2303846-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The command BD ring cousumer index register has the consumer index as
the lower 10 bits, and the bit 31 is SBE, which indicates whether a
system bus error occurred during execution of the CBD command. So if a
system bus error occurs, reading the register will get the SBE bit set.
However, the current implementation directly uses the register value as
the consumer index without masking it. Therefore, if a system bus error
occurs, an incorrect consumer index will be obtained, causing errors in
the processing of the command BD ring. Thus, we need to mask out the
other bits to obtain the correct consumer index.
In addition, this patch adds a check for the SBE bit after the polling
loop and returns an error if the bit is set.
Fixes: 4701073c3deb ("net: enetc: add initial netc-lib driver to support NTMP")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260415060833.2303846-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In pse_isr(), notifs_mask was declared as a single unsigned long on the
stack (32 bits on 32-bit architectures). For PSE controllers with more
than 32 ports, this causes two problems:
- map_event callbacks could wrote bit positions >= 32 via
*notifs_mask |= BIT(i), which is undefined behaviour on a 32-bit
unsigned long and corrupts adjacent stack memory.
- for_each_set_bit(i, ¬ifs_mask, pcdev->nr_lines) treats
¬ifs_mask as a multi-word bitmap and reads beyond the single
unsigned long when nr_lines > BITS_PER_LONG.
Fix this by moving notifs_mask out of the stack and into struct pse_irq
as a dynamically allocated bitmap. It is sized with
BITS_TO_LONGS(pcdev->nr_lines) words in devm_pse_irq_helper(), so it
is always wide enough regardless of the host word size.
[Jakub]: No upstream driver currently supports >=32 ports.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260415130300.806152-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix integer underflow in encrypted read
- Four debug patches, adding a few tracepoints
- Minor update to MAINTAINERS file (preferred server URL for cifs)
- Remove the BUG_ON() calls in d_mark_tmpfile_name
* tag 'v7.1-rc1-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
MAINTAINERS: change git.samba.org to https
smb: client: fix integer underflow in receive_encrypted_read()
smb: client: add tracepoints for deferred handle caching
smb: client: add oplock level to smb3_open_done tracepoint
smb: client: add tracepoint for local lock conflicts
smb: client: add tracepoints for lock operations
vfs: get rid of BUG_ON() in d_mark_tmpfile_name()
|
|
DSA replaces the conduit (master) device's ethtool_ops with its own
wrappers that aggregate stats from both the conduit and DSA switch
ports. Taking the lock again inside the DSA wrappers causes a deadlock.
Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y
(which looks like some kind of testing device that auto-populates the ports
of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero
coverage for DSA stuff with real ops locked devs.
Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from
the DSA conduit ethtool wrappers.
Fixes: 2bcf4772e45a ("net: ethtool: try to protect all callback with netdev instance lock")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260414231035.1917035-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
