| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Currently XDP mode always uses PAGE_SIZE strides. This limitation
existed because page fragment counting was not implemented when XDP was
added. Furthermore, due to this limitation there were other issues as
well on system with larger pages (e.g. 64K):
- XDP for Striding RQ was effectively disabled on such systems.
- Legacy RQ allows the configuration but uses a fixed scheme of one XDP
buffer per page which is inefficient.
As fragment counting was added during the driver conversion to
page_pool and the support for XDP multi-buffer, it is now possible
to remove this stride size limitation. This patch does just that.
Now it is possible to use XDP on systems with higher page sizes (e.g.
64K):
- For Striding RQ, loading the program is no longer blocked.
Although a 64K page can fit any packet, MTUs that result in
stride > 8K will still make the RQ in non-linear mode. That's
because the HW doesn't support a higher than 8K stride.
- For Legacy RQ, the stride size was PAGE_SIZE which was very
inefficient. Now the stride size will be calculated relative to MTU.
Legacy RQ will always be in linear mode for larger system pages.
This can be observed with an XDP_DROP test [1] when running
in Legacy RQ mode on a ARM Neoverse-N1 system with a 64K
page size:
+-----------------------------------------------+
| MTU | baseline | this change | improvement |
|------+------------+-------------+-------------|
| 1500 | 15.55 Mpps | 18.99 Mpps | 22.0 % |
| 9000 | 15.53 Mpps | 18.24 Mpps | 17.5 % |
+-----------------------------------------------+
There are performance benefits for Striding RQ mode as well:
- Striding RQ non-linear mode now uses 256B strides, just like
non-XDP mode.
- Striding RQ linear mode can now fit a number of XDP buffers per page
that is relative to the MTU size. That means that on 4K page systems
and a small enough MTU, 2 XDP buffers can fit in one page.
The above benefits for Striding RQ can be observed with an
XDP_DROP test [1] when running on a 4K page x86_64 system
(Intel Xeon Platinum 8580):
+-----------------------------------------------+
| MTU | baseline | this change | improvement |
|------+------------+-------------+-------------|
| 1000 | 28.36 Mpps | 33.98 Mpps | 19.82 % |
| 9000 | 20.76 Mpps | 26.30 Mpps | 26.70 % |
+-----------------------------------------------+
[1] Test description:
- xdp-bench with XDP_DROP
- RX: single queue
- TX: sends 64B packets to saturate CPU on RX side
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090927.139042-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When calculating the dma address of the linear part of an XDP frame, the
formula assumes that there is a single XDP buffer per page. Extend the
formula to allow multiple XDP buffers per page by calculating the data
offset in the page.
This is a preparation for the upcoming removal of a single XDP buffer
per page limitation when the formula will no longer be correct.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090927.139042-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When 64K pages are used, chunk_size can take the 64K value
which doesn't fit in u16. This results in overflows that
are detected in mlx5e_mpwrq_log_wqe_sz().
Increase the type to u32 to fix this.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090927.139042-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The input parameter requirement for snd_pcm_format_physical_with is
snd_pcm_format_t,but params->codec.format is __u32, resulting in a
mismatch error:
sparse warnings: (new ones prefixed by >>)
>> sound/soc/intel/avs/probes.c:147:58: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected restricted snd_pcm_format_t [usertype] format @@ got unsigned int [usertype] format @@
sound/soc/intel/avs/probes.c:147:58: sparse: expected restricted snd_pcm_format_t [usertype] format
sound/soc/intel/avs/probes.c:147:58: sparse: got unsigned int [usertype] format
So here, the format is cast to snd_pcm_format_t.
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512190032.hnwn9mCV-lkp@intel.com/
Link: https://patch.msgid.link/20260325021752.238203-1-songxiebing@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GC scratch allocations can wrap around and use the same buffer twice, and
the current code fails to account for that. So far this worked due to
rounding in the block layer, but changes to the bio allocator drop the
over-provisioning and generic/256 or generic/361 will now usually fail
when running against the current block tree.
Simplify the allocation to always pass the maximum value that is easier to
verify, as a saving of up to one bvec per allocation isn't worth the
effort to verify a complicated calculated value.
Fixes: 102f444b57b3 ("xfs: rework zone GC buffer management")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Create the csdev_access struct only when a valid MMIO resource is
available. In tpdm_probe(), base is uninitialized for static TPDM
instances that lack an MMIO resource, causing csdev_access to be
created with a garbage address.
So far there has no register access for static instance, but this
change helps mitigate potential risks in the future.
Fixes: 14ae052f7947 ("coresight: tpdm: add static tpdm support")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260407-fix-potential-issue-in-tpdm-v2-1-1d0e0d3cb793@oss.qualcomm.com
|
|
Keeping a value per line makes parsing much easier, so move the maximum
number of open zones into a separate line, and also add a new line for
the number of open open GC zones. While that has to be either 0 or 1
currently having a value future-proofs the interface for adding more open
GC zones if needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Add a sysfs attribute for the current number of open zones so that it
can be trivially read from userspace in monitoring or testing software.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Currently the open zone used for garbage collection is a special snow
flake, and it has been a bit annoying for some further zoned XFS work
I've been doing.
Remove the zi_open_gc_field and instead track the open GC zone in the
zi_open_zones list together with the normal open zones, and keep an extra
pointer and a reference of in the GC thread's data structure. This means
anything iterating over open zones just has to look at zi_open_zones, and
the life time rules are consistent. It also helps to add support for
multiple open GC zones if we ever need them, and removes a bit of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Currently picking of the GC target zone is a bit odd as it is done both
in the main "can we start new GC cycles" routine and in the low-level
block allocator for GC. This was mostly done to work around the rules
for when code in a waitqueue wait loop can sleep.
But with a trick to check if the process state has been set to running to
discover if the wait loop has to be retried, all this becomes much
simpler. We can select a GC zone just before writing, and bail out of
starting new work if we can't find a usable zone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Merge xfs_zone_gc_ensure_target into xfs_zone_gc_select_target
to keep all zone selection code together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
This function returns the current iterator position, which makes the
_next postfix a bit misleading.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The open zone is what holds the rtg reference for us. This doesn't
matter until we support shrinking, and even then is rather theoretical
because we can't shrink away a just filled zone in a tiny race window,
but let's play safe here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The case where we have to reuse an already open zone warrants a different
trace point vs the normal opening of a GC zone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The code currently used to select the new GC target zone when the
previous one is full also handles the case where there is no current GC
target zone at all. Make use of that to simplify the logic in
xfs_zone_gc_mount.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is
zero or i_dtime is set, treating them as deleted. However, the case of
i_nlink == 0 with a non-zero mode and zero dtime slips through. Since
ext2 has no orphan list, such a combination can only result from
filesystem corruption - a legitimate inode deletion always sets either
i_dtime or clears i_mode before freeing the inode.
A crafted image can exploit this gap to present such an inode to the
VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via
ext2_unlink(), ext2_rename() and ext2_rmdir():
WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295
vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477
do_unlinkat+0x53e/0x730 fs/namei.c:4541
__x64_sys_unlink+0xc6/0x110 fs/namei.c:4587
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rename+0x35e/0x850 fs/ext2/namei.c:374
vfs_rename+0xf2f/0x2060 fs/namei.c:5021
do_renameat2+0xbe2/0xd50 fs/namei.c:5178
__x64_sys_rename+0x7e/0xa0 fs/namei.c:5223
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311
vfs_rmdir+0x204/0x690 fs/namei.c:4348
do_rmdir+0x372/0x3e0 fs/namei.c:4407
__x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Extend the existing i_nlink == 0 check to also catch this case,
reporting the corruption via ext2_error() and returning -EFSCORRUPTED.
This rejects the inode at load time and prevents it from reaching any
of the namei.c paths.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20260404152011.2590197-1-kovalev@altlinux.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Use the typed random integer helpers instead of
get_random_bytes() when filling a single integer variable.
The helpers return the value directly, require no pointer
or size argument, and better express intent.
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405154717.4705-1-devnexen@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
In the error path, call fs_put_dax() to drop the DAX
device reference.
Fixes: 6f643c57d57c ("xfs: implement ->notify_failure() for XFS")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When running on conventional zones or devices, the zoned allocator does
not have a real write pointer, but instead fakes it up at mount time
based on the last block recorded in the rmap. This can create spurious
"open" zones when the last written blocks in a conventional zone are
invalidated. Add a loop to the mount code to find the conventional zone
with the highest used block in the rmap tree and "finish" it until we
are below the open zones limit.
While we're at it, also error out if there are too many open sequential
zones, which can only happen when the user overrode the max open zones
limit (or with really buggy hardware reducing the limit, but not much
we can do about that).
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_mount_zones has grown a bit too big and unorganized. Split the
zone reporting loop into a separate helper, hiding the rtg variable
there. Print the mount message last, and also keep the VFS writeback
chunk size last instead of in the middle of the logic to calculate
the free/available blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_extent_busy_ag_cmp() subtracts two uint32_t values (group
numbers and block numbers) and returns the result as s32. When
the difference exceeds INT_MAX, the result overflows and the sort
order is corrupted.
Use cmp_int() instead, as was done in commit 362c49098086 ("xfs:
fix integer overflow in bmap intent sort comparator").
Fixes: 4a137e09151e ("xfs: keep a reference to the pag for busy extents")
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_extent_free_diff_items(), xfs_refcount_update_diff_items(), and
xfs_rmap_update_diff_items() subtract two uint32_t group numbers
and return the result as int, which can overflow when the difference
exceeds INT_MAX.
Use cmp_int() instead, as was done in commit 362c49098086 ("xfs:
fix integer overflow in bmap intent sort comparator").
Fixes: c13418e8eb37 ("xfs: give xfs_rmap_intent its own perag reference")
Fixes: f6b384631e1e ("xfs: give xfs_extfree_intent its own perag reference")
Fixes: 00e7b3bac1dc ("xfs: give xfs_refcount_intent its own perag reference")
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_vn_setattr_size is the only caller of xfs_setattr_size, so merge the
two functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
There already is an assert that checks for uid and gid changes besides a
lot of others at the beginning of the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The SZ_* constants are usize, matching the CPU pointer width. But
device address spaces have their own widths (32-bit MMIO windows,
64-bit GPU framebuffers, etc.), so drivers end up casting these
constants with SZ_1M as u64 or helper functions. This adds
boilerplate with no safety benefit.
Add a SizeConstants trait with associated SZ_* constants, implemented
for u32, u64, and usize. With the trait in scope, callers write
u64::SZ_1M or u32::SZ_4K to get the constant in their device's
native width. All SZ_* values fit in a u32, so every implementation
is lossless. Each impl has a const assert to catch any future
constant that would overflow.
A define_sizes! macro generates everything from a single internal
list of names. The macro takes the target types as arguments, so
adding a new target type requires changing only the call site.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/all/DGB9G697GSWO.3VBFGU5MKFPMR@kernel.org/
Link: https://lore.kernel.org/all/DGHI8WRKBQS9.38910L6FIIZTE@kernel.org/
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260404021204.339779-2-jhubbard@nvidia.com
[ Applied the "kernel vertical" imports style. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The struct lpspi_config::mode holds a copy of the mode of struct
spi_device::mode. In commit 937e6d756422 ("spi: expand mode support") the
struct spi_device::mode was increased from u16 to u32.
Increase the struct lpspi_config::mode to u32 avoid truncating the mode
variable.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-11-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To simplify the loop check. Combine both conditions of the while() and the
directly following if() into the while().
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-10-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function fsl_lpspi_reset() cannot fail and it's return value is never
checked.
Simplify the code and convert it into a void function.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-9-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fsl_lpspi->usedma
The function fsl_lpspi_can_dma() returns a bool.
Simplify the code, remove the if/else and assign the return value of
fsl_lpspi_can_dma() directly to fsl_lpspi->usedma.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-8-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NULL pointer check
fsl_lpspi_setup_transfer() is either called via:
| fsl_lpspi_prepare_message()
| -> fsl_lpspi_setup_transfer()
or
| -> spi_transfer_one_message()
| -> controller->transfer_one == fsl_lpspi_transfer_one()
| -> fsl_lpspi_setup_transfer()
The first call path already has a spi_transfer NULL pointer check, the
second one explicitly iterates over all spi_transfer of the spi_message.
Simplify the code by removing the useless NULL pointer check.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-7-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Command register
Instead of open coding mask and shift operations and to increase
readability use FIELD_PREP() to encode the Transmit Command register.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-6-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
assignment of TCR_CPOL and SPI_CPHA
Commit 7ae4d097b752 ("spi: spi-fsl-lpspi: Handle clock polarity and phase")
enhances the driver with clock polarity and phase handling.
Among other things that commit in fsl_lpspi_set_cmd() explicitly set the
bits TCR_CPOL and TCR_CPHA bits in the TCR register depending on their
corresponding bits in the SPI mode (SPI_CPOL and SPI_CPHA), to configure
clock polarity and phase.
That change made the assignment of the lowest 2 bits of lpspi_config::mode
shifted by << 30 to the TCR register obsolete. The lowest 2 bits of struct
lpspi_config::mode (= SPI_CPOL and SPI_CPHA) match the corresponding bits
in the TCR register (TCR_CPOL and TCR_CPHA) if shifted.
Keep the better readable and maintainable version provided in commit
7ae4d097b752 ("spi: spi-fsl-lpspi: Handle clock polarity and phase") and
remove the obfuscated version.
Cc: Marek Vasut <marex@nabladev.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-5-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fsl_lpspi_data::config::mode
Commit 7ae4d097b752 ("spi: spi-fsl-lpspi: Handle clock polarity and phase")
enhances the driver with clock polarity and phase handling. That commit
adds a 2nd argument ("struct spi_device *spi") to the fsl_lpspi_set_cmd()
function.
The "spi" pointer is used to access the "mode" of the current transfer.
However the mode is already available via "fsl_lpspi->config.mode".
To simplify the driver remove the 2nd argument and use
"fsl_lpspi->config.mode" to access the mode.
Cc: Marek Vasut <marex@nabladev.com>
Reviewed-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-4-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
FIFO Control register
Instead of open coding mask and shift operations and to increase
readability use FIELD_PREP() to encode the FIFO Control register.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-2-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adapt the driver to current kernel coding style standards.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-cleanups-v2-1-02b56c5d44a8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
`feature(file_with_nul)` [1] has been stabilized in Rust 1.92.0 [2].
Thus update the comment to keep track of it.
In addition, this will help to sort new conditionally enabled features
(i.e. `cfg_attr`) around it appropriately.
Link: https://github.com/rust-lang/rust/issues/141727 [1]
Link: https://github.com/rust-lang/rust/pull/145664 [2]
Link: https://patch.msgid.link/20260406095820.465994-1-ojeda@kernel.org
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Boqun Feng <boqun@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Thomas Zimmermann needs 2f42c1a61616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae18b ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a6116286e ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this.
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026033013-disfigure-scroll-e25e@gregkh
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind.
Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Cc: stable@vger.kernel.org # 4.7
Cc: Vishal Thanki <vishalthanki@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260327113219.1313748-1-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260323074551.93530-1-pengpeng@iscas.ac.cn
[add missing wifi prefix]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size.
Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260218130741.46566-3-fourier.thomas@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace "unsigned long int" with "unsigned long" to follow Linux kernel
coding style. No functional change intended.
Signed-off-by: Chen Jung Ku <ku.loong@gapp.nthu.edu.tw>
Link: https://patch.msgid.link/20260405144803.31358-1-ku.loong@gapp.nthu.edu.tw
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
This driver is used on device tree based platform. Use dynamic
GPIO numberspace base to suppress the warning:
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/1774864401-177149-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
There are no more users. Remove the dev-sync-probe module.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-4-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the platform device to probe.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-3-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the platform device to probe.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-2-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the platform device to probe.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-1-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
dynamic_dname() has had an implicit limit of 64 characters since it was
introduced in commit c23fbb6bcb3e ("VFS: delay the dentry name
generation on sockets and pipes"), however it seems that this was a
fairly arbitrary number (suspiciously it was double the previously
hardcoded buffer size).
NAME_MAX seems like a more reasonable and consistent limit for d_name
lengths. While we're at it, we can also remove the unnecessary
stack-allocated array and just memmove() the formatted string to the end
of the buffer.
It should also be noted that at least one driver (in particular,
liveupdate's usage of anon_inode for session files) already exceeded
this limit without noticing that readlink(/proc/self/fd/$n) always
returns -ENAMETOOLONG, so this fixes those drivers as well.
Fixes: 0153094d03df ("liveupdate: luo_session: add sessions support")
Fixes: c23fbb6bcb3e ("VFS: delay the dentry name generation on sockets and pipes")
Signed-off-by: Aleksa Sarai <aleksa@amutable.com>
Link: https://patch.msgid.link/20260401-dynamic-dname-name_max-v1-1-8ca20ab2642e@amutable.com
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This driver provides support for new way of handling platform events,
through the use of GPIO-signaled ACPI events. This mechanism is used on
Intel client platforms released in 2026 and later, starting with Intel
Nova Lake.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260401174526.60881-1-alan.borzeszkowski@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
There is no point in registering an ACPI driver that only has an empty
.add() callback, which is done by the thinkpad_acpi driver, since
after binding to an ACPI device it only sits there and does nothing.
That binding only effectively causes the ACPI device's reference count
to increase, but that can be achieved by using acpi_get_acpi_dev()
instead of acpi_fetch_acpi_dev() in setup_acpi_notify(), and doing
the corresponding cleanup in ibm_exit().
Update the code accordingly and get rid of the non-functional ACPI
driver.
No intentional functional impact beyond altering sysfs content.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/3949487.kQq0lBPeGt@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
