| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Document that all callers hold this lock because the code in
disk_zone_wplug_schedule_bio_work() depends on this.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove a superfluous parenthesis that was introduced by commit fa8555630b32
("blk-zoned: Improve the queue reference count strategy documentation").
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Support for block sizes greater than the page size depends on large
folios, which in turn require CONFIG_TRANSPARENT_HUGEPAGE to be enabled.
Because the code is wrapped in multiple layers of abstraction, this
dependency is rather obscure, so users may not realize it and may be
unsure how to enable LBS.
As suggested by Theodore, I have added hint messages in sb_set_blocksize
so that users can distinguish whether a mount failure with block size
larger than page size is due to lack of filesystem support or the absence
of CONFIG_TRANSPARENT_HUGEPAGE.
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20251110043226.GD2988753@mit.edu
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20251110124714.1329978-1-libaokun@huaweicloud.com
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Documentation build reported:
Warning: block/blk-mq-dma.c:373 expecting prototype for blk_rq_integrity_dma_map_iter_start(). Prototype was for blk_rq_integrity_dma_map_iter_next() instead
The kernel-doc comment above `blk_rq_integrity_dma_map_iter_next()` used
the wrong function name (`blk_rq_integrity_dma_map_iter_start`) in its
header. This patch corrects the function name in the kernel-doc block to
match the actual implementation, ensuring clean documentation builds.
Fixes: fec9b16dc555 ("blk-mq-dma: add scatter-less integrity data DMA mapping")
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The data segment gaps the block layer tracks doesn't apply to bio's that
don't have data. Skip calculating this to fix a NULL pointer access.
Fixes: 2f6b2565d43cdb5 ("block: accumulate memory segment gaps per bio")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_commit_update() expects q->limits_lock to be held by
the caller (via queue_limits_start_update()).
The API pattern is:
lim = queue_limits_start_update(q); /* acquires lock */
/* modify lim */
queue_limits_commit_update(q, &lim); /* releases lock */
OR
queue_limits_commit_update_frozen(q, &lim);
lim = queue_limits_start_update(q); /* acquires lock */
queue_limits_commit_update(q, &lim); /* releases lock */
Add lockdep_assert_held() to report incorrect API usage.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_rq_map_iter_init() has one line with 7 spaces of indentation and
another that mixes 1 tab and 8 spaces. Convert both to tabs.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the function bdev_zone_start() as a more explicit (and clear)
replacement for ALIGN_DOWN() to get the start sector of a zone
containing a particular sector of a zoned block device.
Use this new helper in blkdev_get_zone_info() and
blkdev_report_zones_cached().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The helper function blk_zone_wp_offset() is called from
disk_zone_wplug_sync_wp_offset(), and again called from
blk_revalidate_seq_zone() right after the call to
disk_zone_wplug_sync_wp_offset().
Change disk_zone_wplug_sync_wp_offset() to return the value of obtained
with blk_zone_wp_offset() to avoid this double call, which simplifies a
little blk_revalidate_seq_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_zone_wp_offset() is always called with a struct blk_zone obtained
from the device, that is, it will never see the BLK_ZONE_COND_ACTIVE
condition. However, handling this condition makes this function more
solid and will also avoid issues when propagating cached report requests
to underlying stacked devices is implemented. Add BLK_ZONE_COND_ACTIVE
as a new case in blk_zone_wp_offset() switch.
Also while at it, change the handling of the full condition to return
UINT_MAX for the zone write pointer to reflect the fact that the write
pointer of a full zone is invalid.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkdev_do_report_zones returns the number of reported zones, but
blkdev_get_zone_info returns 0 or an errno. Translate to the expected
return value in blkdev_report_zone_fallback.
Fixes: b037d41762fd ("block: introduce blkdev_get_zone_info()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The blk-mq dma iterator has an optimization for requests that align to
the device's iommu merge boundary. This boundary may be larger than the
device's virtual boundary, but the code had been depending on that queue
limit to know ahead of time if the request is guaranteed to align to
that optimization.
Rather than rely on that queue limit, which many devices may not report,
save the lowest set bit of any boundary gap between each segment in the
bio while checking the segments. The request stores the value for
merging and quickly checking per io if the request can use iova
optimizations.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No zone plugs are allocated when a zone is opened by calling Zone Append
on it. This makes the cached zone reporting report incorrectly empty
zones if the file system is unmounted and report zones is called after
that, e.g. by xfstests test cases using the scratch device.
Fix this by recording if zone append was used on a device, and disable
cached reporting for the device until a ZONE_RESET_ALL happens that
guarantees all zones are empty.
We could probably do even better using a per-zone flag, but the practical
use cache for zone reporting after the initial mount are rather limited,
so let's keep things simple for now.
Fixes: 31f0656a4ab7 ("block: introduce blkdev_report_zones_cached()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
disk->zones_cond is allocated for all zoned devices, but
disk_free_zone_resources skips it when the zone write plug hash is not
allocated, leaking the allocation for non-mq devices that don't emulate
zone append. This is reported by kmemleak-enabled xfstests for various
tests that use simple device mapper targets.
Fix this by moving all code that requires writes plugs from
disk_free_zone_resources into disk_destroy_zone_wplugs_hash_table
and executing the rest of the code, including the disk->zones_cond
freeing unconditionally.
Fixes: 6e945ffb6555 ("block: use zone condition to determine conventional zones")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify queue_zone_wplug_show() to include the condition of a zone write
plug to the zone_wplugs debugfs attribute of a zoned block device.
To improve readability and ease of use, rather than the zone condition
raw value, the zone condition name is given using blk_zone_cond_str().
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make the output of the zone_wplugs debugfs attribute file more easily
readable by adding the name of the zone write plugs fields in the
output.
No functional changes.
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the new BLKREPORTZONESV2 ioctl command to allow user
applications access to the fast zone report implemented by
blkdev_report_zones_cached(). This new ioctl is defined as number 142
and is documented in include/uapi/linux/fs.h.
Unlike the existing BLKREPORTZONES ioctl, this new ioctl uses the flags
field of struct blk_zone_report also as an input. If the user sets the
BLK_ZONE_REP_CACHED flag as an input, then blkdev_report_zones_cached()
is used to generate the zone report using cached zone information. If
this flag is not set, then BLKREPORTZONESV2 behaves in the same manner
as BLKREPORTZONES and the zone report is generated by accessing the
zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the function blkdev_report_zones_cached() to provide a fast
report zone built using the blkdev_get_zone_info() function, which gets
zone information from a disk zones_cond array or zone write plugs.
For a large capacity SMR drive, such fast report zone can be completed
in a few milliseconds compared to several seconds completion times
when the report zone is obtained from the device.
The zone report is built in the same manner as with the regular
blkdev_report_zones() function, that is, the first zone reported is the
one containing the specified start sector and the report is limited to
the specified number of zones (nr_zones argument). The information for
each zone in the report is obtained using blkdev_get_zone_info().
For zoned devices that do not use zone write plug resources,
using blkdev_get_zone_info() is inefficient as the zone report would
be very slow, generated one zone at a time. To avoid this,
blkdev_report_zones_cached() falls back to calling
blkdev_do_report_zones() to execute a regular zone report. In this case,
the .report_active field of struct blk_report_zones_args is set to true
to report zone conditions using the BLK_ZONE_COND_ACTIVE condition in
place of the implicit open, explicit open and closed conditions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the function blkdev_get_zone_info() to obtain a single zone
information from cached zone data, that is, either from the zone write
plug for the target zone if it exists and from the disk zones_cond
array otherwise.
Since sequential zones that do not have a zone write plug are either
full, empty or in a bad state (read-only or offline), the zone write
pointer can be inferred from the zone condition cached in the disk
zones_cond array. For sequential zones that have a zone write plug, the
zone condition and zone write pointer are obtained from the condition
and write pointer offset managed with the zone write plug. This allows
obtaining the information for a zone much more quickly than having to
execute a report zones command on the device.
blkdev_get_zone_info() falls back to using a regular zone report if the
target zone is flagged as needing an update with the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag, or if the target device does not
use zone write plugs (i.e. a device mapper device). In this case, the
new function blkdev_report_zone_fallback() is used and the zone
condition is reported consistantly with the cahced report, that is, the
BLK_ZONE_COND_ACTIVE condition is used in place of the implicit open,
explicit open and closed conditions. This is achieved by adding the
.report_active field to struct blk_report_zones_args and by having
disk_report_zone() sets the correct zone condition if .report_active is
true.
In preparation for using blkdev_get_zone_info() in upcoming file systems
changes, also export this function as a GPL symbol.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for implementing cached report zone, split the main part
of the code of blkdev_report_zones() into the helper function
blkdev_do_report_zones(), with this new helper taking as argument a
struct blk_report_zones_args pointer instead of a report callback
function and its private argument.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The function blk_revalidate_zone_cond() already caches the condition of
all zones of a zoned block device in the zones_cond array of a gendisk.
However, the zone conditions are updated only when the device is scanned
or revalidated.
Implement tracking of the runtime changes to zone conditions using
the new cond field in struct blk_zone_wplug. The size of this structure
remains 112 Bytes as the new field replaces the 4 Bytes padding at the
end of the structure.
Beause zones that do not have a zone write plug can be in the empty,
implicit open, explicit open or full condition, the zones_cond array of
a disk is used to track the conditions, of zones that do not have a zone
write plug. The condition of such zone is updated in the disk zones_cond
array when a zone reset, reset all or finish operation is executed, and
also when a zone write plug is removed from the disk hash table when the
zone becomes full.
Since a device may automatically close an implicitly open zone when
writing to an empty or closed zone, if the total number of open zones
has reached the device limit, the BLK_ZONE_COND_IMP_OPEN and
BLK_ZONE_COND_CLOSED zone conditions cannot be precisely tracked. To
overcome this, the zone condition BLK_ZONE_COND_ACTIVE is introduced to
represent a zone that has the condition BLK_ZONE_COND_IMP_OPEN,
BLK_ZONE_COND_EXP_OPEN or BLK_ZONE_COND_CLOSED. This follows the
definition of an active zone as defined in the NVMe Zoned Namespace
specifications. As such, for a zoned device that has a limit on the
maximum number of open zones, we will never have more zones in the
BLK_ZONE_COND_ACTIVE condition than the device limit. This is compatible
with the SCSI ZBC and ATA ZAC specifications for SMR HDDs as these
devices do not have a limit on the number of active zones.
The function disk_zone_wplug_set_wp_offset() is modified to use the new
helper disk_zone_wplug_update_cond() to update a zone write plug
condition whenever a zone write plug write offset is updated on
submission or merging of write BIOs to a zone.
The functions blk_zone_reset_bio_endio(), blk_zone_reset_all_bio_endio()
and blk_zone_finish_bio_endio() are modified to update the condition of
the zones targeted by reset, reset_all and finish operations, either
using though disk_zone_wplug_set_wp_offset() for zones that have a
zone write plug, or using the disk_zone_set_cond() helper to update the
zones_cond array of the disk for zones that do not have a zone write
plug.
When a zone write plug is removed from the disk hash table (when the
zone becomes empty or full), the condition of struct blk_zone_wplug is
used to update the disk zones_cond array. Conversely, when a zone write
plug is added to the disk hash table, the zones_cond array is used to
initialize the zone write plug condition.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The conv_zones_bitmap field of struct gendisk is used to define a bitmap
to identify the conventional zones of a zoned block device. The bit for
a zone is set in this bitmap if the zone is a conventional one, that is,
if the zone type is BLK_ZONE_TYPE_CONVENTIONAL. For such zone, this
always corresponds to the zone condition BLK_ZONE_COND_NOT_WP.
In other words, conv_zones_bitmap tracks a single condition of the
zones of a zoned block device.
In preparation for tracking more zone conditions, change
conv_zones_bitmap into an array of zone conditions, using 1 byte per
zone. This increases the memory usage from 1 bit per zone to 1 byte per
zone, that is, from 16 KiB to about 100 KiB for a 30 TB SMR HDD with 256
MiB zones. This is a trade-off to allow fast cached report zones later
on top of this change.
Rename the conv_zones_bitmap field of struct gendisk to zones_cond. Add
a blk_revalidate_zone_cond() function to initialize the zones_cond array
of a disk during device scan and to update it on device revalidation.
Move the allocation of the zones_cond array to
disk_revalidate_zone_resources(), making sure that this array is always
allocated, even for devices that do not need zone write plugs (zone
resources), to ensure that bdev_zone_is_seq() can be re-implemented to
use the zone condition array in place of the conv zones bitmap.
Finally, the function bdev_zone_is_seq() is rewritten to use a test on
the condition of the target zone.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reorganize the fields of struct blk_zone_wplug to remove a hole after
the wp_offset field and avoid having the bio_work structure split
between 2 cache lines.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit b76b840fd933 ("dm: Fix dm-zoned-reclaim zone write pointer
alignment") introduced an indirect call for the callback function of a
report zones executed with blkdev_report_zones(). This is necessary so
that the function disk_zone_wplug_sync_wp_offset() can be called to
refresh a zone write plug zone write pointer offset after a write error.
However, this solution makes following the path of a zone information
harder to understand.
Clean this up by introducing the new blk_report_zones_args structure to
define a zone report callback and its private data and introduce the
helper function disk_report_zone() which calls both
disk_zone_wplug_sync_wp_offset() and the zone report user callback
function for all zones of a zone report. This helper function must be
called by all block device drivers that implement the report zones
block operation in order to correctly report a zone information.
All block device drivers supporting the report_zones block operation are
updated to use this new scheme.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The variable capacity is used only in one place and so can be removed
and get_capacity(disk) used directly instead.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify disk_update_zone_resources() to freeze the device queue before
updating the number of zones, zone capacity and other zone related
resources. The locking order resulting from the call to
queue_limits_commit_update_frozen() is preserved, that is, the queue
limits lock is first taken by calling queue_limits_start_update() before
freezing the queue, and the queue is unfrozen after executing
queue_limits_commit_update(), which replaces the call to
queue_limits_commit_update_frozen().
This change ensures that there are no in-flights I/Os when the zone
resources are updated due to a zone revalidation. In case of error when
the limits are applied, directly call disk_free_zone_resources() from
disk_update_zone_resources() while the disk queue is still frozen to
avoid needing to freeze & unfreeze the queue again in
blk_revalidate_disk_zones(), thus simplifying that function code a
little.
Fixes: 0b83c86b444a ("block: Prevent potential deadlock in blk_revalidate_disk_zones()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The functions blk_zone_wplug_handle_reset_or_finish() and
blk_zone_wplug_handle_reset_all() both modify the zone write pointer
offset of zone write plugs that are the target of a reset, reset all or
finish zone management operation. However, these functions do this
modification before the BIO is executed. So if the zone operation fails,
the modified zone write pointer offsets become invalid.
Avoid this by modifying the zone write pointer offset of a zone write
plug that is the target of a zone management operation when the
operation completes. To do so, modify blk_zone_bio_endio() to call the
new function blk_zone_mgmt_bio_endio() which in turn calls the functions
blk_zone_reset_all_bio_endio(), blk_zone_reset_bio_endio() or
blk_zone_finish_bio_endio() depending on the operation of the completed
BIO, to modify a zone write plug write pointer offset accordingly.
These functions are called only if the BIO execution was successful.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When sb_min_blocksize() returns 0 and the return value is not checked,
it may lead to a situation where sb->s_blocksize is 0 when
accessing the filesystem super block. After commit a64e5a596067bd
("bdev: add back PAGE_SIZE block size validation for
sb_set_blocksize()"), this becomes more likely to happen when the
block device’s logical_block_size is larger than PAGE_SIZE and the
filesystem is unformatted. Add the __must_check attribute to ensure
callers always check the return value.
Cc: stable@vger.kernel.org # v6.15
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-6-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add caller-provided callbacks for read and readahead so that it can be
used generically, especially by filesystems that are not block-based.
In particular, this:
* Modifies the read and readahead interface to take in a
struct iomap_read_folio_ctx that is publicly defined as:
struct iomap_read_folio_ctx {
const struct iomap_read_ops *ops;
struct folio *cur_folio;
struct readahead_control *rac;
void *read_ctx;
};
where struct iomap_read_ops is defined as:
struct iomap_read_ops {
int (*read_folio_range)(const struct iomap_iter *iter,
struct iomap_read_folio_ctx *ctx,
size_t len);
void (*read_submit)(struct iomap_read_folio_ctx *ctx);
};
read_folio_range() reads in the folio range and is required by the
caller to provide. read_submit() is optional and is used for
submitting any pending read requests.
* Modifies existing filesystems that use iomap for read and readahead to
use the new API, through the new statically inlined helpers
iomap_bio_read_folio() and iomap_bio_readahead(). There is no change
in functionality for those filesystems.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current block layer automatic integrity protection allocates the
actual integrity buffer, which has three problems:
- because it happens at the bottom of the I/O stack and doesn't use a
mempool it can deadlock under load
- because the data size in a bio is almost unbounded when using lage
folios it can relatively easily exceed the maximum kmalloc size
- even when it does not exceed the maximum kmalloc size, it could
exceed the maximum segment size of the device
Fix this by limiting the I/O size so that we can allocate at least a
2MiB integrity buffer, i.e. 128MiB for 8 byte PI and 512 byte integrity
intervals, and create a mempool as a last resort for this maximum size,
mirroring the scheme used for bvecs. As a nice upside none of this
can fail now, so we remove the error handling and open code the
trivial addition of the bip vec.
The new allocation helpers sit outside of bio-integrity-auto.c because
I plan to reuse them for file system based PI in the near future.
Fixes: 7ba1ba12eeef ("block: Block layer data integrity support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So remove the error check for it in bio_integrity_prep.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring task work dispatch makes an indirect call to struct io_kiocb's
io_task_work.func field to allow running arbitrary task work functions.
In the uring_cmd case, this calls io_uring_cmd_work(), which immediately
makes another indirect call to struct io_uring_cmd's task_work_cb field.
Change the uring_cmd task work callbacks to functions whose signatures
match io_req_tw_func_t. Add a function io_uring_cmd_from_tw() to convert
from the task work's struct io_tw_req argument to struct io_uring_cmd *.
Define a constant IO_URING_CMD_TASK_WORK_ISSUE_FLAGS to avoid
manufacturing issue_flags in the uring_cmd task work callbacks. Now
uring_cmd task work dispatch makes a single indirect call to the
uring_cmd implementation's callback. This also allows removing the
task_work_cb field from struct io_uring_cmd, freeing up 8 bytes for
future storage.
Since fuse_uring_send_in_task() now has access to the io_tw_token_t,
check its cancel field directly instead of relying on the
IO_URING_F_TASK_DEAD issue flag.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
|
|
Make __blk_crypto_bio_prep() propagate BLK_STS_INVAL when IO segments
fail the data unit alignment check.
This was flagged by an LTP test that expects EINVAL when performing an
O_DIRECT read with a misaligned buffer [1].
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/all/aP-c5gPjrpsn0vJA@google.com/ [1]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
|
|
Handle the BLKTRACESETUP2 ioctl, requesting an extended version of the
blktrace protocol from user-space.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer PI generation / verification code expects the bio_vecs
to have at least LBA size (or more correctly integrity internal)
granularity. With the direct I/O alignment relaxation in 2022, user
space can now feed bios with less alignment than that, leading to
scribbling outside the PI buffers. Apparently this wasn't noticed so far
because none of the tests generate such buffers, but since 851c4c96db00
("xfs: implement XFS_IOC_DIOINFO in terms of vfs_getattr"), xfstests
generic/013 by default generates such I/O now that the relaxed alignment
is advertised by the XFS_IOC_DIOINFO ioctl.
Fix this by increasing the required alignment when using PI, although
handling arbitrary alignment in the long run would be even nicer.
Fixes: bf8d08532bc1 ("iomap: add support for dma aligned direct-io")
Fixes: b1a000d3b8ec ("block: relax direct io memory alignment")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Despite its name, the block layer is fine with segments smaller that the
"min_segment_size" limit. The value is an optimization limit indicating
the largest segment that can be used without considering boundary
limits. Smaller segments can take a fast path, so give it a name that
reflects that: max_fast_segment_size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All places were patched by coccinelle with the default expecting that
->i_lock is held, afterwards entries got fixed up by hand to use
unlocked variants as needed.
The script:
@@
expression inode, flags;
@@
- inode->i_state & flags
+ inode_state_read(inode) & flags
@@
expression inode, flags;
@@
- inode->i_state &= ~flags
+ inode_state_clear(inode, flags)
@@
expression inode, flag1, flag2;
@@
- inode->i_state &= ~flag1 & ~flag2
+ inode_state_clear(inode, flag1 | flag2)
@@
expression inode, flags;
@@
- inode->i_state |= flags
+ inode_state_set(inode, flags)
@@
expression inode, flags;
@@
- inode->i_state = flags
+ inode_state_assign(inode, flags)
@@
expression inode, flags;
@@
- flags = inode->i_state
+ flags = inode_state_read(inode)
@@
expression inode, flags;
@@
- READ_ONCE(inode->i_state) & flags
+ inode_state_read(inode) & flags
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change struct size calculation to use struct_size()
to align with new recommended practices[1] which quotes:
"Another common case to avoid is calculating the size of a structure with
a trailing array of others structures, as in:
header = kzalloc(sizeof(*header) + count * sizeof(*header->item),
GFP_KERNEL);
Instead, use the helper:
header = kzalloc(struct_size(header, item, count), GFP_KERNEL);"
Signed-off-by: Mehdi Ben Hadj Khelifa <mehdi.benhadjkhelifa@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit c807ab520fc3 ("block/mq-deadline: Add I/O priority support")
modified the behavior of request flag BLK_MQ_INSERT_AT_HEAD from
dispatching a request before other requests into dispatching a request
before other requests with the same I/O priority. This is not correct since
BLK_MQ_INSERT_AT_HEAD is used when requeuing requests and also when a flush
request is inserted. Both types of requests should be dispatched as soon
as possible. Hence, make the mq-deadline I/O scheduler again ignore the I/O
priority for BLK_MQ_INSERT_AT_HEAD requests.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Yu Kuai <yukuai@kernel.org>
Reported-by: chengkaitao <chengkaitao@kylinos.cn>
Closes: https://lore.kernel.org/linux-block/20251009155253.14611-1-pilgrimtao@gmail.com/
Fixes: c807ab520fc3 ("block/mq-deadline: Add I/O priority support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moalv <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for adding a second caller of this function. No functionality
has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Yu Kuai <yukuai@kernel.org>
Cc: chengkaitao <chengkaitao@kylinos.cn>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- iostats accounting fixed on multipath retries (Amit)
- secure concatenation response fixup (Martin)
- tls partial record fixup (Wilfred)
- Fix for a lockdep reported issue with the elevator lock and
blk group frozen operations
- Fix for a regression in this merge window, where updating
'nr_requests' would not do the right thing for queues with
shared tags
* tag 'block-6.18-20251016' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme/tcp: handle tls partially sent records in write_space()
block: Remove elevator_lock usage from blkg_conf frozen operations
blk-mq: fix stale tag depth for shared sched tags in blk_mq_update_nr_requests()
nvme-auth: update sc_c in host response
nvme-multipath: Skip nr_active increments in RETRY disposition
|
|
Remove the acquisition and release of q->elevator_lock in the
blkg_conf_open_bdev_frozen() and blkg_conf_exit_frozen() functions. The
elevator lock is no longer needed in these code paths since commit
78c271344b6f ("block: move wbt_enable_default() out of queue freezing
from sched ->exit()") which introduces `disk->rqos_state_mutex` for
protecting wbt state change, and not necessary to abuse elevator_lock
for this purpose.
This change helps to solve the lockdep warning reported from Yu Kuai[1].
Pass blktests/throtl with lockdep enabled.
Links: https://lore.kernel.org/linux-block/e5e7ac3f-2063-473a-aafb-4d8d43e5576e@yukuai.org.cn/ [1]
Fixes: commit 78c271344b6f ("block: move wbt_enable_default() out of queue freezing from sched ->exit()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 7f2799c546db ("blk-mq: cleanup shared tags case in
blk_mq_update_nr_requests()") moves blk_mq_tag_update_sched_shared_tags()
before q->nr_requests is updated, however, it's still using the old
q->nr_requests to resize tag depth.
Fix this problem by passing in expected new tag depth.
Fixes: 7f2799c546db ("blk-mq: cleanup shared tags case in blk_mq_update_nr_requests()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-block/20251014130507.4187235-2-clm@meta.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Don't include __GFP_NOWARN for loop worker allocation, as it already
uses GFP_NOWAIT which has __GFP_NOWARN set already
- Small series cleaning up the recent bio_iov_iter_get_pages() changes
- loop fix for leaking the backing reference file, if validation fails
- Update of a comment pertaining to disk/partition stat locking
* tag 'block-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
loop: remove redundant __GFP_NOWARN flag
block: move bio_iov_iter_get_bdev_pages to block/fops.c
iomap: open code bio_iov_iter_get_bdev_pages
block: rename bio_iov_iter_get_pages_aligned to bio_iov_iter_get_pages
block: remove bio_iov_iter_get_pages
block: Update a comment of disk statistics
loop: fix backing file reference leak on validation error
|
|
Keep bio_iov_iter_get_bdev_pages local with the callers, as blindly
looking at the bdev logical block size is often not the best idea
unless on a block device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that the bio_iov_iter_get_pages is free again, use it instead of
the more complicated now. Also drop the unused export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch the only caller to bio_iov_iter_get_pages, and explain why it does
not have any alignment requirements.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
