aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpio (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-09-09gpio: loongson-64bit: Remove unneeded semicolonChen Ni1-1/+1
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the semantic patch at scripts/coccinelle/misc/semicolon.cocci. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/r/20250909065913.4011133-1-nichen@iscas.ac.cn Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVELLinus Walleij1-1/+1
This generic pin config property is confusingly named so let's rename it to make things clearer. There are already drivers in the tree that use PIN_CONFIG_OUTPUT to *read* the value of an output driven pin, which is a big semantic confusion for the head: are we then reading the setting of the output or the actual value/level that is put out on the pin? We already have PIN_CONFIG_OUTPUT_ENABLE that turns on driver buffers for output, so this can by logical conclusion only drive the voltage level if it should be any different. But if we read the pin, are we then reading the *setting* of the output value or the *actual* value we can see on the line? If the pin has not first been set into output mode with PIN_CONFIG_OUTPUT_ENABLE, but is instead in some input mode or tristate, what will reading this property actually return? Reading the current users reading this property it is clear that what we read is the logical level of the pin as 0 or 1 depending on if it is low or high. Rename it to PIN_CONFIG_LEVEL so it is crystal clear that we set or read the voltage level of the pin and nothing else. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-09-08gpio: pisosr: Use devm_mutex_init()Christophe JAILLET1-7/+1
Use devm_mutex_init() instead of hand-writing it. This saves some LoC, improves readability and saves some space in the generated .o file. Before: ====== text data bss dec hex filename 8431 1808 192 10431 28bf drivers/gpio/gpio-pisosr.o After: ===== text data bss dec hex filename 8112 1736 192 10040 2738 drivers/gpio/gpio-pisosr.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/01910ebdaba7d8d0cdc4ac60eb70da8e29cb85f1.1757251512.git.christophe.jaillet@wanadoo.fr Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: loongson-64bit: Add support for Loongson-2K0300 SoCYao Zi2-7/+183
This controller's input and output logic is similar to previous generations of SoCs. Additionally, it's capable of interrupt masking, and could be configured to detect levels and edges, and is supplied with a distinct reset signal. The interrupt functionality is implemented through an irqchip, whose operations are written with previous generation SoCs in mind and could be reused. Since all Loongson SoCs with similar interrupt capability (LS2K1500, LS2K2000) support byte-control mode, these operations are for byte-control mode only for simplicity. Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250904013438.2405-3-ziyao@disroot.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: Kconfig: Update help for GPIO_PCA953XAkhilesh Patil1-4/+8
Update help description with supported ICs from gpio-pca953x.c Include missing IC names. Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in> Link: https://lore.kernel.org/r/aLmtOWjAWPtWe/gH@bhairav-test.ee.iitb.ac.in Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: mlxbf3: use new generic GPIO chip APIBartosz Golaszewski1-50/+53
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-12-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: ep93xx: use new generic GPIO chip APIBartosz Golaszewski1-5/+18
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-11-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: ep93xx: order includes alphabeticallyBartosz Golaszewski1-5/+5
For better readability and easier maintenance, order the includes alphabetically. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-10-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: ep93xx: allow building the module with COMPILE_TEST enabledBartosz Golaszewski1-1/+1
Increase build coverage by allowing the module to be built with COMPILE_TEST=y. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-9-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: mlxbf: use new generic GPIO chip APIBartosz Golaszewski1-10/+15
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-8-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: tb10x: use new generic GPIO chip APIBartosz Golaszewski1-30/+30
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-7-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: tb10x: allow building the module with COMPILE_TEST=yBartosz Golaszewski1-1/+2
Increase build coverage by allowing the module to be built with COMPILE_TEST=y. We need an actual prompt entry in this case so add it. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-6-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: tb10x: order includes alphabeticallyBartosz Golaszewski1-8/+8
For better readability and easier maintenance, order the includes alphabetically. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-5-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: blzp1600: use new generic GPIO chip APIBartosz Golaszewski1-15/+24
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-4-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: idt3243x: use new generic GPIO chip APIBartosz Golaszewski1-22/+23
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-3-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: ixp4xx: use new generic GPIO chip APIBartosz Golaszewski1-34/+36
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-2-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08gpio: ixp4xx: allow building the module with COMPILE_TEST enabledBartosz Golaszewski1-2/+1
Increase build coverage by allowing the module to be built with COMPILE_TEST=y. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250903-gpio-mmio-gpio-conv-part3-v1-1-ff346509f408@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-08Merge tag 'v6.17-rc5' of ↵Bartosz Golaszewski4-39/+37
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next Linux 6.17-rc5
2025-09-06gpio: mpc5200: Drop legacy-of-mm-gpiochip.h headerChristophe Leroy2-36/+43
Remove legacy-of-mm-gpiochip.h header file. The above mentioned file provides an OF API that's deprecated. There is no agnostic alternatives to it and we have to open code the logic which was hidden behind of_mm_gpiochip_add_data(). Note, most of the GPIO drivers are using their own labeling schemas and resource retrieval that only a few may gain of the code deduplication, so whenever alternative is appear we can move drivers again to use that one. [text copied from commit 34064c8267a6 ("powerpc/8xx: Drop legacy-of-mm-gpiochip.h header")] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/9652736ef05b94d9113ea5ce7899734ef82343d1.1755520794.git.christophe.leroy@csgroup.eu
2025-09-04gpio: nomadik: wrap a local variable in a necessary ifdefBartosz Golaszewski1-0/+2
The 'desc' local variable in nmk_gpio_dbg_show_one() is now only used with CONFIG_PINCTRL_NOMADIK enabled so wrap its declaration with an appropriate ifdef. Fixes: ddeb66d2cb10 ("gpio: nomadik: don't print out global GPIO numbers in debugfs callbacks") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509032125.nXBcPuaf-lkp@intel.com/ Link: https://lore.kernel.org/r/20250903131903.95100-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: xra1403: don't print out global GPIO numbers in debugfs callbacksBartosz Golaszewski1-2/+1
In order to further limit the number of references to the GPIO base number stored in struct gpio_chip, replace the global GPIO numbers in the output of debugfs callbacks by hardware offsets. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-6-7f27cd7f2256@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: mvebu: don't print out global GPIO numbers in debugfs callbacksBartosz Golaszewski1-1/+1
In order to further limit the number of references to the GPIO base number stored in struct gpio_chip, replace the global GPIO numbers in the output of debugfs callbacks by hardware offsets. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-5-7f27cd7f2256@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: wm8994: don't print out global GPIO numbers in debugfs callbacksBartosz Golaszewski1-4/+2
In order to further limit the number of references to the GPIO base number stored in struct gpio_chip, replace the global GPIO numbers in the output of debugfs callbacks by hardware offsets. Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-4-7f27cd7f2256@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: wm831x: don't print out global GPIO numbers in debugfs callbacksBartosz Golaszewski1-3/+2
In order to further limit the number of references to the GPIO base number stored in struct gpio_chip, replace the global GPIO numbers in the output of debugfs callbacks by hardware offsets. Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-3-7f27cd7f2256@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: nomadik: don't print out global GPIO numbers in debugfs callbacksBartosz Golaszewski1-13/+12
In order to further limit the number of references to the GPIO base number stored in struct gpio_chip, replace the global GPIO numbers in the output of debugfs callbacks by hardware offsets. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-2-7f27cd7f2256@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: stmpe: don't print out global GPIO numbers in debugfs callbacksBartosz Golaszewski1-8/+6
In order to further limit the number of references to the GPIO base number stored in struct gpio_chip, replace the global GPIO numbers in the output of debugfs callbacks by hardware offsets. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-1-7f27cd7f2256@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: visconti: use new generic GPIO chip APIBartosz Golaszewski1-10/+15
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-12-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: vf610: use new generic GPIO chip APIBartosz Golaszewski1-10/+17
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-11-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: hisi: use new generic GPIO chip APIBartosz Golaszewski1-19/+27
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-10-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: realtek-otto: use new generic GPIO chip APIBartosz Golaszewski1-17/+24
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-9-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: ftgpio010: use new generic GPIO chip APIBartosz Golaszewski1-17/+22
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-8-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: ftgpio010: order includes alphabeticallyBartosz Golaszewski1-3/+4
For easier maintenance: put includes in alphabetical order. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-7-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: xgs-iproc: use new generic GPIO chip APIBartosz Golaszewski1-15/+19
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-6-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: mlxbf2: use new generic GPIO chip APIBartosz Golaszewski1-29/+30
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-5-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: mlxbf2: use dev_err_probe() where applicableBartosz Golaszewski1-16/+8
Simplify error handling and shrink the code by using dev_err_probe() consistently across the driver. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-4-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: mxs: use new generic GPIO chip APIBartosz Golaszewski1-10/+17
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-3-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: mxs: order includes alphabeticallyBartosz Golaszewski1-2/+2
For easier maintenance: put includes in alphabetical order. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-2-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-03gpio: xgene-sb: use new generic GPIO chip APIBartosz Golaszewski1-23/+30
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250826-gpio-mmio-gpio-conv-part2-v1-1-f67603e4b27e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-02gpio: fix GPIO submenu in KconfigBartosz Golaszewski1-3/+3
Commit a86240a37d43 ("gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB") accidentally pulled all items from within the GPIOLIB submenu into the main driver menu. Put them back under the top-level GPIO entry. Suggested-by: Rob Herring <robh@kernel.org> Fixes: a86240a37d43 ("gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB") Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/all/20250813222649.GA965895-robh@kernel.org/ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250901125513.108691-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-09-01gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-05Antheas Kapenekakis1-0/+12
Same issue as G1619-04 in commit 805c74eac8cb ("gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04"), Strix Point lineup uses 05. Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Reviewed-by: Mika Westerberg <westeri@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2025-09-01gpio: tegra186: Add support for Tegra256Prathamesh Shete1-0/+28
Extend the existing Tegra186 GPIO controller driver with support for the GPIO controller found on Tegra256. While the programming model remains the same, the number of pins has slightly changed. Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/r/20250823055420.24664-2-pshete@nvidia.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-31Merge tag 'gpio-fixes-for-v6.17-rc4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix an off-by-one bug in interrupt handling in gpio-timberdale - update MAINTAINERS * tag 'gpio-fixes-for-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: Change Altera-PIO driver maintainer gpio: timberdale: fix off-by-one in IRQ type boundary check
2025-08-26gpio: timberdale: fix off-by-one in IRQ type boundary checkJunjie Cao1-1/+1
timbgpio_irq_type() currently accepts offset == ngpio, violating gpiolib's [0..ngpio-1] contract. This can lead to undefined behavior when computing '1 << offset', and it is also inconsistent with users that iterate with for_each_set_bit(..., ngpio). Tighten the upper bound to reject offset == ngpio. No functional change for in-range offsets. Signed-off-by: Junjie Cao <junjie.cao@intel.com> Link: https://lore.kernel.org/r/20250825090850.127163-1-junjie.cao@intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-25gpio: sim: don't use GPIO base in debugfs outputBartosz Golaszewski1-2/+1
We're in the process of removing unneeded references to the global GPIO base number treewide. Use the HW offset instead of the base number. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250815111733.79283-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-25gpio: mmio: Add compatible for the ixp4xx eb MMIOLinus Walleij1-0/+1
The IXP4xx expansion bus can have simple memory-mapped GPIO on it. Using the proper device tree bindings, support probing this directly from the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250822-ixp4xx-eb-mmio-gpio-v2-3-bd2edd4a9c74@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-25Merge tag 'pinctrl-v6.17-2' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Module macro parameter fix for the meson driver so that it actually modprobes - ACPI quirk for the ASUS ProArt PX13 - Build dependency for the STMFX driver - Proper return value for the pinconf callbacks in the Airhoa driver * tag 'pinctrl-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: airoha: Fix return value in pinconf callbacks pinctrl: STMFX: add missing HAS_IOMEM dependency gpiolib: acpi: Add quirk for ASUS ProArt PX13 pinctrl: meson: Fix typo in device table macro
2025-08-25gpio: ge: use new generic GPIO chip APIBartosz Golaszewski1-6/+19
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-14-356b4b1d5110@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-25gpio: mpc8xxx: use new generic GPIO chip APIBartosz Golaszewski1-40/+62
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-13-356b4b1d5110@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-25gpio: grgpio: use new generic GPIO chip APIBartosz Golaszewski1-43/+44
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-12-356b4b1d5110@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-25gpio: rda: use new generic GPIO chip APIBartosz Golaszewski1-14/+21
Convert the driver to using the new generic GPIO chip interfaces from linux/gpio/generic.h. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-11-356b4b1d5110@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-27 18:45:37 +0000