aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-09-16drm/amd/display: Use devm_i2c_add_adapter to simplify i2c cleanup logicRodrigo Siqueira1-19/+2
This commit replaces the utilization of i2c_add/del_adapter() with devm_i2c_add_adapter() to reduce the amount of boilerplate. Using devm_i2c_add_adapter() has the advantage of removing the manual manipulation of the I2C adapter. Suggested-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-16drm/amd/display: Use kmalloc_array() instead of kmalloc()James Flowers1-2/+2
Documentation/process/deprecated.rst recommends against the use of kmalloc with dynamic size calculations due to the risk of overflow and smaller allocation being made than the caller was expecting. This could lead to buffer overflow in code similar to the memcpy in amdgpu_dm_plane_add_modifier(). Signed-off-by: James Flowers <bold.zone2373@fastmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-16drm/amdgpu: fix userq VM validation v4Christian König3-75/+110
That was actually complete nonsense and not validating the BOs at all. The code just cleared all VM areas were it couldn't grab the lock for a BO. Try to fix this. Only compile tested at the moment. v2: fix fence slot reservation as well as pointed out by Sunil. also validate PDs, PTs, per VM BOs and update PDEs v3: grab the status_lock while working with the done list. v4: rename functions, add some comments, fix waiting for updates to complete. v4: rename amdgpu_vm_lock_done_list(), add some more comments Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-16drm/amdgpu: reject gang submissions under SRIOVChristian König1-1/+1
Gang submission means that the kernel driver guarantees that multiple submissions are executed on the HW at the same time on different engines. Background is that those submissions then depend on each other and each can't finish stand alone. SRIOV now uses world switch to preempt submissions on the engines to allow sharing the HW resources between multiple VFs. The problem is now that the SRIOV world switch can't know about such inter dependencies and will cause a timeout if it waits for a partially running gang submission. To conclude SRIOV and gang submissions are fundamentally incompatible at the moment. For now just disable them. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-16drm/xe: Remove duplicate header filesYang Li2-4/+2
Fix some duplicate includes in xe: ./drivers/gpu/drm/xe/xe_tlb_inval.c: xe_tlb_inval.h is included more than once. ./drivers/gpu/drm/xe/xe_pt.c: xe_tlb_inval_job.h is included more than once. While at it, also sort the include lines alphabetically. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=24705 Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=24706 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [Reword commit message] Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250916021039.1632766-1-yang.lee@linux.alibaba.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-09-16drm/xe/guc: Return an error code if the GuC load failsJohn Harrison1-4/+9
Due to multiple explosion issues in the early days of the Xe driver, the GuC load was hacked to never return a failure. That prevented kernel panics and such initially, but now all it achieves is creating more confusing errors when the driver tries to submit commands to a GuC it already knows is not there. So fix that up. As a stop-gap and to help with debug of load failures due to invalid GuC init params, a wedge call had been added to the inner GuC load function. The reason being that it leaves the GuC log accessible via debugfs. However, for an end user, simply aborting the module load is much cleaner than wedging and trying to continue. The wedge blocks user submissions but it seems that various bits of the driver itself still try to submit to a dead GuC and lots of subsequent errors occur. And with regards to developers debugging why their particular code change is being rejected by the GuC, it is trivial to either add the wedge back in and hack the return code to zero again or to just do a GuC log dump to dmesg. v2: Add support for error injection testing and drop the now redundant wedge call. CC: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://lore.kernel.org/r/20250909224132.536320-1-John.C.Harrison@Intel.com
2025-09-16drm/xe: Fix a NULL vs IS_ERR() in xe_vm_add_compute_exec_queue()Dan Carpenter1-2/+2
The xe_preempt_fence_create() function returns error pointers. It never returns NULL. Update the error checking to match. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/aJTMBdX97cof_009@stanley.mountain Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 75cc23ffe5b422bc3cbd5cf0956b8b86e4b0e162) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-09-16drm/xe/sysfs: Add cleanup action in xe_device_sysfs_initZongyao Bai1-2/+6
On partial failure, some sysfs files created before the failure might not be removed. Add common cleanup step to remove them all immediately, as is should be harmless to attempt to remove non-existing files. Fixes: 0e414bf7ad01 ("drm/xe: Expose PCIe link downgrade attributes") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Shuicheng Lin <shuicheng.lin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Zongyao Bai <zongyao.bai@intel.com> Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250915214716.1327379-2-zongyao.bai@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-09-16drm: bridge: cdns-mhdp8546: Fix missing mutex unlock on error pathQi Xi1-2/+4
Add missing mutex unlock before returning from the error path in cdns_mhdp_atomic_enable(). Fixes: 935a92a1c400 ("drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qi Xi <xiqi2@huawei.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250904034447.665427-1-xiqi2@huawei.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-16drm/i915/backlight: Honor VESA eDP backlight luminance control capabilityAaron Ma1-1/+1
The VESA AUX backlight fails to be enable luminance based backlight mainpulation becaused luminance_set is false by default. Fix it by using luminance support control capabitliy. Fixes: e13af5166a359 ("drm/i915/backlight: Use drm helper to initialize edp backlight") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250823121647.275834-1-aaron.ma@canonical.com (cherry picked from commit 72136efb875d8438c20b9c8ab72945d474933471) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2025-09-16drm/panic: use `core::ffi::CStr` method namesTamir Duberstein1-1/+1
Prepare for `core::ffi::CStr` taking the place of `kernel::str::CStr` by avoid methods that only exist on the latter. Link: https://github.com/Rust-for-Linux/linux/issues/1075 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <lossin@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-09-16gpu: nova-core: use `kernel::{fmt,prelude::fmt!}`Tamir Duberstein2-5/+4
Reduce coupling to implementation details of the formatting machinery by avoiding direct use for `core`'s formatting traits and macros. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <lossin@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-09-16Merge tag 'exynos-drm-next-for-v6.18' of ↵Dave Airlie2-36/+9
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next New feature - Add glue layer support for Exynos7870 DSIM in Exynos DSI driver . Introduces Exynos7870 DSIM bridge integration at Exynos DRM DSI layer. Bug fixups for exynos7_drm_decon.c module - Remove redundant ctx->suspended state handling . Cleans up unused state check logic as call flow is now correctly managed. . Fixes an issue where decon_commit() was blocked from decon_atomic_enable() due to incorrect state setting. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://lore.kernel.org/r/20250915113543.51294-1-inki.dae@samsung.com
2025-09-16Merge tag 'exynos-drm-misc-next-for-v6.18' of ↵Dave Airlie1-87/+266
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next New feature - Add DSIM bridge driver support for Exynos7870 . Introduces Exynos7870 DSIM IP block support in the samsung-dsim bridge driver. - Document Exynos7870 DSIM compatible in dt-bindings . Adds exynos7870 compatible string and required clocks in device tree schema. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://lore.kernel.org/r/20250915111802.28177-1-inki.dae@samsung.com
2025-09-16Merge tag 'drm-msm-next-2025-09-12' of ↵Dave Airlie55-880/+1454
https://gitlab.freedesktop.org/drm/msm into drm-next Changes for v6.18 GPU and Core: - in DT bindings describe clocks per GPU type - GMU bandwidth voting for x1-85 - a663 speedbins - a623 speedbins - cleanup some remaining no-iommu leftovers after VM_BIND conversion - fix GEM obj 32b size truncation - add missing VM_BIND param validation - various fixes - IFPC for x1-85 and a750 - register xml and gen_header.py sync from mesa Display: - add missing bindings for display on SC8180X - added DisplayPort MST bindings - conversion from round_rate() to determine_rate() - DSI PHY fixes, correcting programming glitches - misc small fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <rob.clark@oss.qualcomm.com> Link: https://lore.kernel.org/r/CACSVV01FgXN+fD6U1Hi6Tj4WCf=V-+NO8BXi+80iS4qOZwpaGg@mail.gmail.com
2025-09-15drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/putIvan Lipski1-1/+38
[Why&How] As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936, SMU hang can occur if the interrupts are not enabled appropriately, causing a vblank timeout. This patch reverts commit 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the issue was observed. This will re-enable interrupts regardless of whether the user space needed it or not. Fixes: 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936 Suggested-by: Sun peng Li <sunpeng.li@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 95d168b367aa28a59f94fc690ff76ebf69312c6d) Cc: stable@vger.kernel.org
2025-09-15drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.0.1/11.0.4 GPUsSrinivasan Shanmugam1-0/+15
Enable the cleaner shader for additional GFX11.0.1/11.0.4 series GPUs to ensure data isolation among GPU tasks. The cleaner shader is tasked with clearing the Local Data Store (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid data leakage and guarantees the accuracy of computational results. This update extends cleaner shader support to GFX11.0.1/11.0.4 GPUs, previously available for GFX11.0.3. It enhances security by clearing GPU memory between processes and maintains a consistent GPU state across KGD and KFD workloads. Cc: Wasee Alam <wasee.alam@amd.com> Cc: Mario Sopena-Novales <mario.novales@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0a71ceb27f88a944c2de2808b67b2f46ac75076b)
2025-09-15drm/amd: Drop unnecessary calls to smu_dpm_set_vpe_enable()Mario Limonciello (AMD)1-2/+0
smu_hw_init() and smu_hw_fini() call smu_dpm_set_vpe_enable() for APUs as part of startup and teardown. These calls however are not necessary because vpe_hw_init()/vpe_hw_fini() will call at init/fini: ``` vpe_hw_init() / vpe_hw_fini() amdgpu_device_ip_set_powergating_state() vpe_set_powergating_state() amdgpu_dpm_enable_vpe() amdgpu_dpm_set_powergating_by_smu() smu_dpm_set_power_gate() smu_dpm_set_vpe_enable() ``` Drop the extra calls. Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amdgpu: revert "Implement new dummy vram manager"Christian König2-63/+13
This is should be unnecessary since a VRAM manager isn't mandatory in the first place. It could be that we have some missing checks inside AMDGPU or TTM but those should then be fixed instead of worked around like that. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amdgpu: add AMDGPU_IDS_FLAGS_GANG_SUBMITChristian König1-0/+4
Add a UAPI flag indicating if gang submit is supported or not. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Don't use non-registered VUPDATE on DCE 6Timur Kristóf2-14/+24
The VUPDATE interrupt isn't registered on DCE 6, so don't try to use that. This fixes a page flip timeout after sleep/resume on DCE 6. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Disable VRR on DCE 6Timur Kristóf3-1/+10
DCE 6 was not advertised as being able to support VRR, so let's mark it as unsupported for now. The VRR implementation in amdgpu_dm depends on the VUPDATE interrupt which is not registered for DCE 6. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Disable fastboot on DCE 6 tooTimur Kristóf1-4/+2
It already didn't work on DCE 8, so there is no reason to assume it would on DCE 6. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display/dml2: Guard dml21_map_dc_state_into_dml_display_cfg with ↵Xi Ruoyao1-0/+4
DC_FP_START dml21_map_dc_state_into_dml_display_cfg calls (the call is usually inlined by the compiler) populate_dml21_surface_config_from_plane_state and populate_dml21_plane_config_from_plane_state which may use FPU. In a x86-64 build: $ objdump --disassemble=dml21_map_dc_state_into_dml_display_cfg \ > drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.o | > grep %xmm -c 63 Thus it needs to be guarded with DC_FP_START. But we must note that the current code quality of the in-kernel FPU use in AMD dml2 is very much problematic: we are actually calling DC_FP_START in dml21_wrapper.c here, and this translation unit is built with CC_FLAGS_FPU. Strictly speaking this does not make any sense: with CC_FLAGS_FPU the compiler is allowed to generate FPU uses anywhere in the translated code, perhaps out of the DC_FP_START guard. This problematic pattern also occurs in at least dml2_wrapper.c, dcn35_fpu.c, and dcn351_fpu.c. Thus we really need a careful audit and refactor for the in-kernel FPU uses, and this patch is simply whacking a mole. However per the reporter, whacking this mole is enough to make a 9060XT "just work." Reported-by: Asiacn <710187964@qq.com> Closes: https://github.com/loongson-community/discussions/issues/102 Tested-by: Asiacn <710187964@qq.com> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Keep PLL0 running on DCE 6.0 and 6.4Timur Kristóf1-1/+10
DC can turn off the display clock when no displays are connected or when all displays are off, for reference see: - dce*_validate_bandwidth DC also assumes that the DP clock is always on and never powers it down, for reference see: - dce110_clock_source_power_down In case of DCE 6.0 and 6.4, PLL0 is the clock source for both the engine clock and DP clock, for reference see: - radeon_atom_pick_pll - atombios_crtc_set_disp_eng_pll Therefore, PLL0 should be always kept running on DCE 6.0 and 6.4. This commit achieves that by ensuring that by setting the display clock to the corresponding value in low power state instead of zero. This fixes a page flip timeout on SI with DC which happens when all connected displays are blanked. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Fix DVI-D/HDMI adaptersTimur Kristóf1-0/+4
When the EDID has the HDMI bit, we should simply select the HDMI signal type even on DVI ports. For reference see, the legacy amdgpu display code: amdgpu_atombios_encoder_get_encoder_mode which selects ATOM_ENCODER_MODE_HDMI for the same case. This commit fixes DVI connectors to work with DVI-D/HDMI adapters so that they can now produce output over these connectors for HDMI monitors with higher bandwidth modes. With this change, even HDMI audio works through DVI. For testing, I used a CAA-DMDHFD3 DVI-D/HDMI adapter with the following GPUs: Tahiti (DCE 6) - DC can now output 4K 30 Hz over DVI Polaris 10 (DCE 11.2) - DC can now output 4K 60 Hz over DVI Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amdkfd: add function svm_migrate_successful_pagesJames Zhu1-14/+15
to get migration pages. dst MIGRATE_PFN_VALID bit and src MIGRATE_PFN_MIGRATE bit should always be set when migration success. cpage includes src MIGRATE_PFN_MIGRATE bit set and MIGRATE_PFN_VALID bit unset pages for both RAM and VRAM when memory is only allocated without being populated before migration, those ram pages should be counted as migrated pages and those vram pages should not be counted as migrated pages. Here migration pages refer to how many vram pages invloved. Current svm_migrate_unsuccessful_pages only covers the unsuccessful case that source is on RAM. So far, we only see two unsuccessful migration cases. Since we can clearly identify successful migration cases through dst MIGRATE_PFN_VALID bit and src MIGRATE_PFN_MIGRATE bit within this prange, also eventually successful migration pages will be used, so we can use function svm_migrate_successful_pages to replace function svm_migrate_unsuccessful_pages. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15Revert "drm/amdkfd: return migration pages from copy function"James Zhu1-65/+65
This reverts commit bd6093e2f1601c0c83906f5115a2efb6b93050b1. migrate_vma_pages can fail if a CPU thread faults on the same page. However, the page table is locked and only one of the new pages will be inserted. The device driver will see that the MIGRATE_PFN_MIGRATE bit is cleared if it loses the race. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/amdgpu: Fix the mes version that support inv_tlbsShaoyun Liu1-1/+1
MES pipe0 will do VM invalidation with engine set 5 when assign VMID to a process, driver will submit inv_tlb package to mes pipe1. It might run into race condition if both pipes use the same invalidate engine set. From MES version 0x83 it will use invalidate engine set 6 for pipe1 to fix the issue Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd: Avoid evicting resources at S5Mario Limonciello (AMD)1-0/+4
Normally resources are evicted on dGPUs at suspend or hibernate and on APUs at hibernate. These steps are unnecessary when using the S4 callbacks to put the system into S5. Cc: AceLan Kao <acelan.kao@canonical.com> Cc: Kai-Heng Feng <kaihengf@nvidia.com> Cc: Mark Pearson <mpearson-lenovo@squebb.ca> Cc: Denis Benato <benato.denis96@gmail.com> Cc: Merthan Karakaş <m3rthn.k@gmail.com> Tested-by: Eric Naim <dnaim@cachyos.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amdgpu: Switch user queues to use preempt/restore for evictionJesse.Zhang1-5/+48
This patch modifies the user queue management to use preempt/restore operations instead of full map/unmap for queue eviction scenarios where applicable. The changes include: 1. Introduces new helper functions: - amdgpu_userqueue_preempt_helper() - amdgpu_userqueue_restore_helper() 2. Updates queue state management to track PREEMPTED state 3. Modifies eviction handling to use preempt instead of unmap: - amdgpu_userq_evict_all() now uses preempt_helper - amdgpu_userq_restore_all() now uses restore_helper The preempt/restore approach provides better performance during queue eviction by avoiding the overhead of full queue teardown and setup. Full map/unmap operations are still used for initial setup/teardown and system suspend scenarios. v2: rename amdgpu_userqueue_restore_helper/amdgpu_userqueue_preempt_helper to amdgpu_userq_restore_helper/amdgpu_userq_preempt_helper for consistency. (Alex) v3: amdgpu_userq_stop_sched_for_enforce_isolation() and amdgpu_userq_start_sched_for_enforce_isolation() should use preempt and restore (Alex) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amdgpu: adjust MES API used for suspend and resumeJesse.Zhang1-0/+72
Use the suspend and resume API rather than remove queue and add queue API. The former just preempts the queue while the latter remove it from the scheduler completely. There is no need to do that, we only need preemption in this case. V2: replace queue_active with queue state v3: set the suspend_fence_addr v4: allocate another per queue buffer for the suspend fence, and set the sequence number. also wait for the suspend fence. (Alex) v5: use a wb slot (Alex) v6: Change the timeout period. For MES, the default timeout is 2100000; /* 2100 ms */ (Alex) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: unified smu feature cap for vcn resetYang Wang3-11/+5
unified vcn reset smu feature cap Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: unified smu feature cap for sdma resetYang Wang3-11/+5
unified sdma reset smu feature cap Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/pm: unified smu feature cap for link resetYang Wang3-12/+11
unified link reset smu feature cap Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Promote DC to 3.2.350Taimur Hassan1-1/+1
This version brings along following updates: - Add DSC padding for OVT support - Setup pixel encoding for YCBCR422 - Fix dml ms order - Rename header file link.h to link_service.h - Fix DMUB loading sequence - Modify link training policy Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15Revert "drm/amd/display: Reduce Stack Usage by moving 'audio_output' into ↵Martin Leung5-27/+31
'stream_res' v4" This reverts commit 1cf1205ef268 ("drm/amd/display: Reduce Stack Usage by moving 'audio_output' into 'stream_res' v4") Reason for revert: Causes DP compliance errors Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Add DSC padding for OVT SupportRelja Vojvodic10-54/+55
[Why] -Certain OVT timings require DSC configurations which divide the horizontal active unevenly across DSC slices -DSC slices must be even, so padding needs to be added to the active to make this possible -The pixel clock of the HW now needs to be increased to accommodate the extra padded pixels -To keep the line time the same, the blank of the HW timing needs to be increased as well [How] -Calculate h_active padding, h_total padding, and pixel clock based off of the original OVT timing and DSC calculations -Store these values in the pipe and program HW with these modifications -Added general support for cases where DSC slice config does not evenly split the horizontal active by fixing some slice width calculations -Updated PPS calculations for these cases Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Relja Vojvodic <rvojvodi@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Add fallback path for YCBCR422Mario Limonciello2-9/+37
[Why] DP validation may fail with multiple displays and higher color depths. The sink may support others though. [How] When DP bandwidth validation fails, progressively fallback through: - YUV422 8bpc (bandwidth efficient) - YUV422 6bpc (reduced color depth) - YUV420 (last resort) This resolves cases where displays would show no image due to insufficient DP link bandwidth for the requested RGB mode. Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Set up pixel encoding for YCBCR422Mario Limonciello1-0/+3
[Why] fill_stream_properties_from_drm_display_mode() will not configure pixel encoding to YCBCR422 when the DRM color format supports YCBCR422 but not YCBCR420 or YCBCR4444. Instead it will fallback to RGB. [How] Add support for YCBCR422 in pixel encoding mapping. Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: fix dml ms order of operationsAusef Yousof1-1/+1
[why&how] small error in order of operations in immediateflipbytes calculation on dml ms side that can result in dml ms and mp mismatch immediateflip support for a given pipe and thus an invalid hw state, correct the order to align with mp. Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: limit one non-related log to dGPUCharlene Liu1-2/+2
[Why&How] some log are for dGPU only. Added check to limit log. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/putIvan Lipski1-1/+38
[Why&How] As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936, SMU hang can occur if the interrupts are not enabled appropriately, causing a vblank timeout. This patch reverts commit 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the issue was observed. This will re-enable interrupts regardless of whether the user space needed it or not. Fixes: 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936 Suggested-by: Sun peng Li <sunpeng.li@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Rename header file link.h to link_service.hWesley Chalmers69-72/+73
[WHY] Header file name "link.h" collides with system header when dc is compiled as a user-mode library [WHAT] Rename link.h to link_service.h to avoid name collision Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Fix DMCUB loading sequence for DCN3.2Nicholas Kazlauskas2-26/+35
[Why] New sequence from HW for reset and firmware reloading has been provided that aims to stabilize the reload sequence in the case the firmware is hung or has outstanding requests. [How] Update the sequence to remove the DMUIF reset and the redundant writes in the release. Reviewed-by: Sreeja Golui <sreeja.golui@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: prepare dml 2.1 for new asicDmytro Laktyushkin3-4/+5
[Why&How] prepare dml 2.1 for new asic Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Modify the link training policyZhikai Zhai1-0/+9
[Why&How] Currently fallback to low link rate if the link training fails once on USB4. It may cause the bandwidth couldn't satisfy the requirement of streams. Modify the policy to do training retry in the previous few times, only do fallback at the last time. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15Revert "drm/amdgpu: Allocate psp fw private buffer in vram"Hawking Zhang1-1/+2
This reverts commit 22dcb283d63d5677a5875d0002d04d2c61720f78. Need to certain APU platforms and will proceed to rework the patch accordingly Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.0.1/11.0.4 GPUsSrinivasan Shanmugam1-0/+15
Enable the cleaner shader for additional GFX11.0.1/11.0.4 series GPUs to ensure data isolation among GPU tasks. The cleaner shader is tasked with clearing the Local Data Store (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid data leakage and guarantees the accuracy of computational results. This update extends cleaner shader support to GFX11.0.1/11.0.4 GPUs, previously available for GFX11.0.3. It enhances security by clearing GPU memory between processes and maintains a consistent GPU state across KGD and KFD workloads. Cc: Wasee Alam <wasee.alam@amd.com> Cc: Mario Sopena-Novales <mario.novales@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd: Duplicate DC_FEATURE_MASK and DC_DEBUG_MASK enum values into kdocMario Limonciello1-32/+66
[Why] When kernel documentation is generated the enum values themselves don't end up in the documentation. This makes browsing them in HTML a lot less useful. [How] Copy DC_DEBUG_MASK and DC_FEATURE_MASK enum values into matching kdoc comments. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-25 12:43:11 +0000