| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace the open coded vma mm node stuff in intel_dpt_offset()
with i915_vma_offset(). This will also include the VT-d guard
in the result. Granted that should always be 0 for DPT, but
it seems prudent to include that in our DPT vma offset check
anyway.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250717171353.23090-5-ville.syrjala@linux.intel.com
|
|
Now that we handle all the other vma offset stuff in
intel_plane_pin_fb() it seems more proper to do the
dpt_vma offset check there as well.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250717171353.23090-4-ville.syrjala@linux.intel.com
|
|
We don't really need the extra intel_plane_ggtt_offset() wrapper
anymore. Get rid of it.
v2: Deal with reuse_vma() hacks
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250717171353.23090-3-ville.syrjala@linux.intel.com
|
|
Currently we pre-compute the plane surface/base address
partially (only for cursor_needs_physical cases) in
intel_plane_pin_fb() and finish the calculation in the
plane->update_arm(). Let's just precompute the whole thing
instead.
One benefit is that we get rid of all the vma offset stuff
from the low level plane code. Another use I have in mind
is including the surface address in the plane tracepoints,
which should make it easier to analyze display faults.
v2: Deal with xe reuse_vma() hacks
v3: use intel_plane_ggtt_offset() still in reuse_vma()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250717203216.31258-1-ville.syrjala@linux.intel.com
|
|
GLK doesn't use the DSI C clock at all, no need to program
the divider for it. Bspec even says: "Do not program this field".
However looks like some firmware versions program this and
some do not. In order to avoid bogus fastset mismatches
we should also filter it out during readout.
v2: Clear all the DSI C clock bits during readout (Jani)
Adjust platform checks for new style, and add
has_dsic_clock() while at it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250718112928.27669-1-ville.syrjala@linux.intel.com
|
|
The EU stall debug message may cause CI to complain on
unsupported platforms. Remove it.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/dfb6a080b3442d481c567489aabe47e72f3e784c.1752870172.git.harish.chegondi@intel.com
|
|
When bailing out due to group_priority_permit() failure, the queue_args
need to be freed. Fix it by rearranging the function to use the
goto-on-error pattern, such that the success case flows straight without
indentation while error cases jump forward to cleanup.
Cc: stable@vger.kernel.org
Fixes: 5f7762042f8a ("drm/panthor: Restrict high priorities on group_create")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241113-panthor-fix-gcq-bailout-v1-1-654307254d68@google.com
|
|
DRM bridges now use "devm_drm_bridge_alloc()" for allocation and
initialization. "devm_kzalloc()" is not allowed anymore and it results
in WARNING. So convert it.
Fixes: 7246e0929945 ("drm/tidss: Add OLDI bridge support")
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250714104554.13441-1-j-choudhary@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Convert the tidss encoder to use devm_drm_bridge_alloc(). Instead of
allocating the memory by drmm_simple_encoder_alloc() use
devm_drm_bridge_alloc() and initialize the encoder afterwards.
Fixes: a7748dd127ea ("drm/bridge: get/put the bridge reference in drm_bridge_add/remove()")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250716134107.4084945-1-mwalle@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Create and use XE_DEVICE_WA infrastructure (Atwood)
- SRIOV: Mark BMG as SR-IOV capable (Michal)
- Dont skip TLB invalidations on VF (Tejas)
- Fix migration copy direction in access_memory (Auld)
- General code clean-up (Lucas, Brost, Dr. David, Xin)
- More missing XeLP workarounds (Tvrtko)
- SRIOV: Relax VF/PF version negotiation (Michal)
- SRIOV: LMTT invalidation (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aHacDvF9IaVHI61C@intel.com
|
|
Currently the job free work item will lock sched->job_list_lock first time
to see if there are any jobs, free a single job, and then lock again to
decide whether to re-queue itself if there are more finished jobs.
Since drm_sched_get_finished_job() already looks at the second job in the
queue we can simply add the signaled check and have it return the presence
of more jobs to be freed to the caller. That way the work item does not
have to lock the list again and repeat the signaled check.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250716085117.56864-1-tvrtko.ursulin@igalia.com
|
|
The drm_gem ioctls were documented in internal file drm_gem.c
instead of uapi header drm.h. Move them there and change to
appropriate kerneldoc formatting.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250717143556.857893-3-David.Francis@amd.com
|
|
CRIU restore of drm buffer objects requires the ability to create
or import a buffer object with a specific gem handle.
Add new drm ioctl DRM_IOCTL_GEM_CHANGE_HANDLE, which takes
the gem handle of an object and moves that object to a
specified new gem handle.
This ioctl needs to call drm_prime_remove_buf_handle,
but that function acquires the prime lock, which the ioctl
needs to hold for other purposes.
Make drm_prime_remove_buf_handle not acquire the prime lock,
and change its other caller to reflect this.
The rest of the kernel patches required to enable CRIU can be
found at
https://lore.kernel.org/dri-devel/20250617194536.538681-1-David.Francis@amd.com/
v2 - Move documentation to UAPI headers
v3 - Always return 0 on success
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250717143556.857893-2-David.Francis@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- SR-IOV fixes for GT reset and TLB invalidation
- Fix memory copy direction during migration
- Fix alignment check on migration
- Fix MOCS and page fault init order to correctly
account for topology
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/6jworkgupwstm4v7aohbuzod3dyz4u7pyfhshr5ifgf2xisgj3@cm5em5yupjiu
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250718
1. Add wait_event_timeout when disabling plane
2. only announce AFBC if really supported
3. mtk_dpi: Reorder output formats on MT8195/88
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250717232916.12372-1-chunkuang.hu@kernel.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-07-17:
amdgpu:
- Fix a DC memory leak
- DCN 4.0.1 degamma LUT fix
- Fix reset counter handling for soft recovery
- GC 8 fix
radeon:
- Drop console locks when suspending/resuming
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250717171935.642380-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- DP AUX DPCD address fix (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aHkQmRhelb4Fzqau@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16 final?:
- nouveau ioctl validation fix.
- panfrost scheduler bug.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/ee784a3a-30b4-489a-8503-b1be3b09268c@linux.intel.com
|
|
Reorder output format arrays in both MT8195 DPI and DP_INTF block
configuration by decreasing preference order instead of alphanumeric
one, as expected by the atomic_get_output_bus_fmts callback function
of drm_bridge controls, so the RGB ones are used first during the
bus format negotiation process.
Fixes: 20fa6a8fc588 ("drm/mediatek: mtk_dpi: Allow additional output formats on MT8195/88")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250606-mtk_dpi-mt8195-fix-wrong-color-v1-1-47988101b798@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Currently even the SoC's OVL does not declare the support of AFBC, AFBC
is still announced to the userspace within the IN_FORMATS blob, which
breaks modern Wayland compositors like KWin Wayland and others.
Gate passing modifiers to drm_universal_plane_init() behind querying the
driver of the hardware block for AFBC support.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: CK Hu <ck.hu@medaitek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250531121140.387661-1-uwu@icenowy.me/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Our hardware registers are set through GCE, not by the CPU.
DRM might assume the hardware is disabled immediately after calling
atomic_disable() of drm_plane, but it is only truly disabled after the
GCE IRQ is triggered.
Additionally, the cursor plane in DRM uses async_commit, so DRM will
not wait for vblank and will free the buffer immediately after calling
atomic_disable().
To prevent the framebuffer from being freed before the layer disable
settings are configured into the hardware, which can cause an IOMMU
fault error, a wait_event_timeout has been added to wait for the
ddp_cmdq_cb() callback,indicating that the GCE IRQ has been triggered.
Fixes: 2f965be7f900 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250624113223.443274-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The inline pci_is_display() helper does the same thing. Use it.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patch.msgid.link/20250717173812.3633478-4-superm1@kernel.org
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc7).
Conflicts:
Documentation/netlink/specs/ovpn.yaml
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
af52020fc599 ("ovpn: reject unexpected netlink attributes")
drivers/net/phy/phy_device.c
a44312d58e78 ("net: phy: Don't register LEDs for genphy")
f0f2b992d818 ("net: phy: Don't register LEDs for genphy")
https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org
drivers/net/wireless/intel/iwlwifi/fw/regulatory.c
drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap")
ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware")
net/ipv6/mcast.c
ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()")
a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()")
https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Everyone implements the .set_idle_link_train() hook now.
Just make it mandatory.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-8-ville.syrjala@linux.intel.com
|
|
All platforms are capable of explicitly transmitting the idle
pattern. Implement it for everyone (so far it as implemented
only for HSW+).
The immediate benefit is that we gain the possibility of
implementing the POST_LT_ADJ_REQ sequence for all platforms.
Another potential future use would be a pseudo port sync mode on
pre-BDW where we attempt to sync up multiple ports/pipes by trying
to turn on the transcoders at the same time, and switching the
links to normal pixel transmission at the same time.
I'm not 100% sure the hardware is guaranteed to transmit the
required number of idle patterns (5) when switching away from
training pattern (either via explicit idle pattern, or straight
to the normal pixel output). Would be nice to confirm that at
some point, but for now let's assume it happens correctly in
both cases.
v2: Elaborate a bit more on the min required idle patterns
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-7-ville.syrjala@linux.intel.com
|
|
Move intel_dp_training_pattern() upwards to avoid the forward
declaration for the POST_LT_ADJ_REQ stuff.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-6-ville.syrjala@linux.intel.com
|
|
In order to implement the POST_LT_ADJ_REQ sequence we need to
know whether the sink actually requested a changed to the
vswing/pre-emph values.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-5-ville.syrjala@linux.intel.com
|
|
We are supposed to switch off the training pattern in DPCD before
we start transmitting the idle pattern. For LTTPRs we do that
correctly, but for the sink DPRX we only do this correctly
for some platforms.
On pre-HSW (where we don't implement the .set_idle_link_train()
hook), we directly switch from transmitting the training pattern
to normal pixel transmission (the hardware should hopefully
guarantee that the minimum number of required idle patters will
be transmitted during this transition). The DPCD write correctly
precedes the actual switch away from the training pattern.
For HSW+ we start transmitting the idle pattern earlier, and only
switch off the DPCD training pattern after we switch from the idle
pattern to normal pixel transmission. Adjust the code to disable
the DPCD training pattern before we start transmitting the idle
pattern.
v2: Tweak the commit message a bit
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-4-ville.syrjala@linux.intel.com
|
|
For some reason we are switching over to the idle pattern before
disabling the DP port on pre-hsw. AFAICS this has never been part
of the documented sequence (and on hsw+ the spec explicitly says
not to do this). Get rid of it.
The code goes all the way back to commit 5eb08b69f510 ("drm/i915: enable
DisplayPort support on IGDNG"), and it was accompanied by a 17ms delay
which got changed to vbl wait in commit ab527efc2fea ("drm/i915: use
wait_for_vblank instead of msleep(17)"), and was later completely removed
in commit 93c9c19b3d25 ("drm/i915: remove unexplained vblank wait in
the DP off code").
Smoke tested on g4x/snb/chv.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
On g4x we currently use the 96MHz non-SSC refclk, which can't actually
generate an exact 2.7 Gbps link rate. In practice we end up with 2.688
Gbps which seems to be close enough to actually work, but link training
is currently failing due to miscalculating the DP_LINK_BW value (we
calcualte it directly from port_clock which reflects the actual PLL
outpout frequency).
Ideas how to fix this:
- nudge port_clock back up to 270000 during PLL computation/readout
- track port_clock and the nominal link rate separately so they might
differ a bit
- switch to the 100MHz refclk, but that one should be SSC so perhaps
not something we want
While we ponder about a better solution apply some band aid to the
immediate issue of miscalculated DP_LINK_BW value. With this
I can again use 2.7 Gbps link rate on g4x.
Cc: stable@vger.kernel.org
Fixes: 665a7b04092c ("drm/i915: Feed the DPLL output freq back into crtc_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Rather than checking in the callbacks, check if the reset
type is supported in the caller.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the dirty bit when the memory resource is not cleared
during BO release.
v2(Christian):
- Drop the cleared flag set to false.
- Improve the amdgpu_vram_mgr_set_clear_state() function.
v3:
- Add back the resource clear flag set function call after
being cleared during eviction (Christian).
- Modified the patch subject name.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cached metrics data validity is 1ms on SMUv13.0.6 SOCs. It's not
reasonable for any client to query gpu_metrics at a faster rate and
constantly interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If dpm tables are already populated on SMU v13.0.6 SOCs, use the cached
data. Otherwise, fetch values from firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
counters through debugfs
Add debug nodes, "dgfx_pkg_residencies" for G-states (G2, G6, G8, G10,
ModS) and "dgfx_pcie_link_residencies" for PCIe link states(L0, L1, L1.2)
residency counters.
v1:
- Expose all G-State residency counter values under
dgfx_pkg_residencies. (Anshuman)
- Include runtime_get/put. (Riana)
v2:
- Move offset macros to drm/xe/regs/xe_pmt. (Riana)
v3:
- Include debugfs node "dgfx_pcie_link_residencies" for pcie link
residency counter values. (Anshuman)
v4:
- Include check for BMG and add helper function for repetitive
code. (Riana)
- Add for loop and local struct to avoid repetition. (Riana)
- Use "drm_debugfs_create_files" to create debugfs. (Karthik)
v5:
- Reorder commits to reflect the correct dependency hierarchy. (Jonathan)
- Simplification of commit message and rectified register offset.(Karthik)
- Error handling and return before printing. (Riana)
v6:
- Remove check for DGFX as BMG is discrete. (Karthik)
- Rearrange residency offsets in ascending order. (Riana)
v7:
- Squash the macros into the patch they are used in. (Lucas)
Signed-off-by: Soham Purkait <soham.purkait@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250716101412.3062780-2-soham.purkait@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GL extension KHR_robustness uses the number of global and per-context
GPU resets to learn about graphics resets that affect a GL context. This
commit introduces a new V3D parameter to retrieve the number of GPU resets
triggered by jobs submitted through a file descriptor.
To retrieve this information, user-space must use DRM_V3D_PARAM_CONTEXT_RESET_COUNTER.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250711-v3d-reset-counter-v1-2-1ac73e9fca2d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
The GL extension KHR_robustness uses the number of global and per-context
GPU resets to learn about graphics resets that affect a GL context. This
commit introduces a new V3D parameter to retrieve the global number of
GPU resets that have happened since the driver was probed.
To retrieve this information, user-space must use DRM_V3D_PARAM_GLOBAL_RESET_COUNTER.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250711-v3d-reset-counter-v1-1-1ac73e9fca2d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
If we reload the GuC due to suspend/resume or GT reset then we
have to resend not only any VFs provisioning data, but also PF
configuration, like scheduling parameters (EQ, PT), as otherwise
GuC will continue to use default values.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-3-michal.wajdeczko@intel.com
(cherry picked from commit 1c38dd6afa4a8ecce28e94da794fd1d205c30f51)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
$ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset
this PF worker might be still busy, which lead to errors due to
just stopped or disabled GuC CTB communication:
[ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
[ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe]
[ ] xe 0000:00:02.0: [drm] GT0: reset queued
[ ] xe 0000:00:02.0: [drm] GT0: reset started
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
[ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled!
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED)
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations
[ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com
(cherry picked from commit 9f50b729dd61dfb9f4d7c66900d22a7c7353a8c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The check would fail if the address is unaligned, but not when
accounting the offset. Instead of `buf | offset` it should have
been `buf + offset`. To make it more readable and also drop the
uintptr_t, just use the IS_ALIGNED() macro.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250710-migrate-aligned-v1-1-44003ef3c078@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 81e139db6900503a2e68009764054fad128fbf95)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We need the topology to determine GT page fault queue size, move page
fault init after topology init.
Cc: stable@vger.kernel.org
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com
(cherry picked from commit beb72acb5b38dbe670d8eb752d1ad7a32f9c4119)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
