summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorLines
2013-04-16Merge branch 'for-linus' of ↵Linus Torvalds-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Two small fixups to the Wacom driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - correct reported resolution for Intuos4 Wireless Input: wacom - fix "can not retrieve extra class descriptor" for 24HDT
2013-04-16Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot-8/+8
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-15Input: apbps2 - convert to devm_ioremap_resource()Sachin Kamat-5/+3
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: ALPS - use %ph to print buffersDmitry Torokhov-7/+5
This form is more concise. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - add reset pin handlingBastian Hecht-4/+43
We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - convert to devm_* infrastructureLaurent Pinchart-22/+12
Use the devm_* managed functions to allocate resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: wacom - correct reported resolution for Intuos4 WirelessJason Gerecke-1/+1
Reported-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: wacom - fix "can not retrieve extra class descriptor" for 24HDTJason Gerecke-1/+1
The MFT device in the Cintiq 24HDT has two interfaces sharing the same configuration. Without this patch, the driver attempts to make use of both interfaces, even though the second interface is not compatible with this driver. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: MT - handle semi-mt devices in coreHenrik Rydberg-1/+7
Most semi-mt drivers use the slots in a manual way, but really only need to treat the finger count manually. With this patch, a semi-mt driver may use the input-mt core for everything else. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: adxl34x - use spi_get_drvdata()Jingoo Han-3/+3
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han-5/+5
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han-2/+2
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-05input: Add ChromeOS EC keyboard driverSimon Glass-0/+347
Use the key-matrix layer to interpret key scan information from the EC and inject input based on the FDT-supplied key map. This driver registers itself with the ChromeOS EC driver to perform communications. The matrix-keypad FDT binding is used with a small addition to control ghosting. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-05input: matrix-keymap: Add function to read the new DT bindingSimon Glass-18/+35
We now have a binding which adds two parameters to the matrix keypad DT node. This is separate from the GPIO-driven matrix keypad binding, and unfortunately incompatible, since that uses row-gpios/col-gpios for the row and column counts. So the easiest option here is to provide a function for non-GPIO drivers to use to decode the binding. Note: We could in fact create an entirely separate structure to hold these two fields, but it does not seem worth it, yet. If we have more parameters then we can add this, and then refactor each driver to hold such a structure. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> (v2) Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-01Input: ims-pcu - fix a memory leak on errorDmitry Torokhov-2/+3
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: tegra-kbc - support for defining row/columns based on SoCLaxman Dewangan-18/+62
NVIDIA's Tegra20 and Tegra30 supports the 16x8 keyboard matrix and T114 support the 11x8 Key matrix. Add support for defining the maximum row/columns based on SoC through proper compatibility. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: imx_keypad - switch to using managed resourcesFabio Estevam-63/+14
Using devm_ functions can make the code cleaner and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: arc_ps2 - add support for device treeMischa Jonker-2/+12
Add match table for device tree binding and dts binding doc. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: mma8450 - fix signed 12bits to 32bits conversionSebastien Royen-3/+3
Event value is wrong. Should be in range -2048 to 2047, but is in range 0 to 4095. Use s8 to int conversion and remove 0xfff mask. Signed-off-by: Sebastien Royen <sebastien.royen@armadeus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: eeti_ts - remove redundant null checkSachin Kamat-2/+1
'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: edt-ft5x06 - remove redundant null check before kfreeSachin Kamat-2/+1
kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-26Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han-2/+2
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/ad714x-i2c.c:17:12: warning: 'ad714x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-i2c.c:22:12: warning: 'ad714x_i2c_resume' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:20:12: warning: 'ad714x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:25:12: warning: 'ad714x_spi_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-26Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han-2/+2
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/adxl34x-spi.c:98:12: warning: 'adxl34x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-spi.c:108:12: warning: 'adxl34x_spi_resume' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:109:12: warning: 'adxl34x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:119:12: warning: 'adxl34x_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-18Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds-6/+2
Pull ARM SoC bug fixes from Arnd Bergmann: "Things are calming down for arm-soc as well. This set of bug fixes is dominated in size by the at91 platform bug fixes. Some of them were meant to go through the framebuffer tree during the merge window, but since the framebuffer maintainer could not be reached, I offered to take them here. The other notable at91 change is the addition of pinctrl definitions to fix the NAND controller. The rest are mostly simple regression fixes: - Our removal of VIRT_TO_BUS conflicted with Stephen Rothwell's renaming of the Kconfig symbol. You will get a trivial merge conflict here, we still want to remove it. - missing bits for clocks on imx and s5pv210 - missing header inclusions in mmp and shmobile - typos in s5pv210 camera and vt8500 clock support code and three trivial fixes for pre-3.8 bugs: - an old bogus build warning in the joystick driver - a misleading Kconfig description - a NULL pointer check on davinci" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: fix CONFIG_VIRT_TO_BUS handling ARM: i.MX35: enable MAX clock ARM: Scorpion is a v7 architecture, not v6 ARM: mmp: add platform_device head file in gplugd input/joystick: use get_cycles on ARM [media] s5p-fimc: fix s5pv210 build clk: vt8500: Fix "fix device clock divisor calculations" ARM: i.MX25: Fix DT compilation ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: fix LCD-wiring mode atmel_lcdfb: fix 16-bpp modes on older SOCs ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 ARM: shmobile: marzen: Include mmc/host.h ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 ARM: S5PV210: Fix PL330 DMA controller clkdev entries
2013-03-17Input: mc13783_ts - use module_platform_driver_probe()Fabio Porcedda-11/+1
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: atmel-wm97xx - use module_platform_driver_probe macroSachin Kamat-11/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: q40kbd - use module_platform_driver_probe macroSachin Kamat-12/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: at32psif - use module_platform_driver_probe macroSachin Kamat-12/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: amimouse - use module_platform_driver_probe macroSachin Kamat-13/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: nomadik-ske-keypad - use module_platform_driver_probe macroSachin Kamat-11/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: amikbd - use module_platform_driver_probe macroSachin Kamat-13/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: twl4030-pwrbutton - use module_platform_driver_probe macroSachin Kamat-11/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: davinci_keyscan - use module_platform_driver_probe macroSachin Kamat-11/+1
module_platform_driver_probe() simplifies the code by eliminating boilerplate code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: tegra-kbc - convert to devm_ioremap_resource()Sachin Kamat-5/+4
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Merge tag 'v3.9-rc3' into nextDmitry Torokhov-631/+993
Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().
2013-03-14Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann-4/+64
From Nicolas Ferre <nicolas.ferre@atmel.com>: Two patches for Device Tree on at91sam9x5/NAND. Two more for fixing PM suspend/resume IRQ on AIC5 and GPIO used with pinctrl. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments Includes an update to -rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14input/joystick: use get_cycles on ARMArnd Bergmann-6/+2
ARM normally has an accurate clock source, so we can theoretically use analog joysticks more accurately and at the same time avoid the build warning #warning Precise timer not defined for this architecture. from the joystick driver. Now, why anybody would use that driver no ARM I have no idea, but Ben Dooks enabled it in the s3c2410_defconfig along with a bunch of other drivers, even though that platform has neither ISA nor PCI support. It still seems to be the right thing to fix this quirk. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Ben Dooks <ben-linux@fluff.org>
2013-03-12Input: add IMS Passenger Control Unit driverDmitry Torokhov-0/+1911
The PCU is a device installed in the armrest of a plane seat and is connected to IMS Rave Entertainment System. It has a set of control buttons (Volume Up/Down, Attendant, Lights, etc) on one side and gamepad-like controls on the other side. Originally the device was handled from userspace and because of that it presents itself on USB bus as a CDC-ACM modem device that however can not make calls. However the custom handling is not as convenient as using standard input subsystem facilities. If it was pure input device it would be possible to continue using userspace solution (moving it over to uinput), but the device also has backlighted keys which can not be supported via uinput. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: wm9712 - fix dev_dbg newlinesMarkus Pargmann-9/+9
dev_dbg should end with a new line. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: wm9712 - fix wrong pen up readingsMarkus Pargmann-2/+6
Often a reading can be wrong. This patch assures that this is really a pen up event and not a false reading. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: wm9712 - fix return code for wrong sampleMarkus Pargmann-1/+1
Instead of interpreting a wrong measurement as pen up, we should try to read again. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: wm97xx - drop out of range inputsMarkus Pargmann-0/+11
With fast movements, there occured some out of screen jumps with my touchscreen. The abs_x and abs_y module parameters should fix this by default, but the driver doesn't actively checks the x/y coordinates. Instead it seems that the input layer was supposed to drop out of range inputs, as described in the comments: "These parameters are used to help the input layer discard out of range readings and reduce jitter etc" The input layer documentation describes that values that are not in the absolute range are also accepted. So this patch adds a check within the driver. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12Input: add support for GRLIB APBPS2 PS/2 Keyboard/MouseDaniel Hellstrom-0/+241
APBPS2 is a PS/2 core part of GRLIB found in SPARC32/LEON products. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-11Merge branch 'for-linus' of ↵Linus Torvalds-33/+125
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Except for the largish change to the ALPS driver adding "Dolphin V1" support and Wacom getting a new signature of yet another device, the rest are straightforward driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mms114 - Fix regulator enable and disable paths Input: ads7864 - check return value of regulator enable Input: tc3589x-keypad - fix keymap size Input: wacom - add support for 0x10d Input: ALPS - update documentation for recent touchpad driver mods Input: ALPS - add "Dolphin V1" touchpad support Input: ALPS - remove unused argument to alps_enter_command_mode() Input: cypress_ps2 - fix trackpadi found in Dell XPS12
2013-03-10Input: mms114 - Fix regulator enable and disable pathsMark Brown-9/+25
When it uses regulators the mms114 driver checks to see if it managed to acquire regulators and ignores errors. This is not the intended usage and not great style in general. Since the driver already refuses to probe if it fails to allocate the regulators simply make the enable and disable calls unconditional and add appropriate error handling, including adding cleanup of the regulators if setup_reg() fails. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-10Input: ads7864 - check return value of regulator enableMark Brown-1/+6
At least print a warning if we can't power the device up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-10Input: tc3589x-keypad - fix keymap sizeRabin Vincent-4/+4
The keymap size used by tc3589x is too low, leading to the driver overwriting other people's memory. Fix this by making the driver use the automatically allocated keymap provided by matrix_keypad_build_keymap() instead of allocating one on its own. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-09Input: wacom - add support for 0x10dStephan Frank-0/+4
It is a Wacom device found in Fujitsu Lifebook T902. Signed-off-by: Stephan Frank <sfrank@cs.tu-berlin.de> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-09Atmel MXT touchscreen: increase reset timeoutsLinus Torvalds-2/+2
There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-08Input: atmel_mxt_ts - Support for touchpad variantDaniel Kurtz-2/+62
This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-07-17 10:59:34 +0000