summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorLines
2015-07-23Input: cyapa - add gen6 device module supportDudley Du-4/+834
Based on the cyapa core, add support for basic functionality of the gen6 trackpad devices. The driver can automatically determine what protocol (gen3, gen5, or gen6) should be used with the attached trackpad device. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: cyapa - rename 'gen5' to 'pip' for chared codeDudley Du-604/+673
Change 'gen5' to 'pip' for all macros, variables and functions that are shared between gen5 and gen6 modules to make naming more clear and readable. Also fix a few spelling errors. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: tc3589x-keypad - switch to using managed resourcesHimangi Saraogi-38/+20
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: tc3589x-keypad - change name of wakeup propertyDmitry Torokhov-1/+4
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: samsung-keypad - change name of wakeup propertyDmitry Torokhov-2/+4
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: gpio_keys[_polled] - change name of wakeup propertyDmitry Torokhov-2/+7
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: pmic8xxx-keypad - change name of wakeup propertyDmitry Torokhov-4/+6
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: ads7846 - change name of wakeup property to "wakeup-source"Dmitry Torokhov-1/+2
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: matrix_keypad - change name of wakeup property to "wakeup-source"Dmitry Torokhov-2/+4
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: pmic8xxx-pwrkey - support shutdownStephen Boyd-2/+266
On pm8xxx PMICs, shutdown and restart are signaled to the PMIC via a pin called PS_HOLD. When this pin goes low, the PMIC performs a configurable power sequence. Add a .shutdown hook so that we can properly configure this power sequence for shutdown or restart depending on the system state. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: usbtouchscreen - avoid unresponsive TSC-30 touch screenBernhard Bender-0/+3
This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Cc: stable@vger.kernel.org Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com> Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-20Merge tag 'v4.2-rc3' into nextDmitry Torokhov-60/+643
Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.
2015-07-20Input: elan_i2c - enable ELAN0600 acpi panelsBenjamin Tissoires-0/+1
ELAN0600 seems to work just fine in mouse emulation mode through i2c-hid, but to have full raw touch support we need to register it in elan_i2c.ko Reported-and-tested-by: Alessio Treglia <alessio@debian.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-20Input: zforce - don't invert the interrupt GPIODirk Behme-1/+1
Commit 2d53809594af ("Input: zforce_ts - convert to use the gpiod interface") converted this driver to use the gpiod functions. These functions take the active low property into account, so we don't have to invert the result of gpiod_get_value_cansleep(). This has been missed in that commit. Fix it. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-18input: snvs_pwrkey: use "wakeup-source" as deivce tree property nameShawn Guo-1/+1
Instead of inventing a new property name, let's use "wakeup-source" to be consistent with other driver and subsystem bindings. Signed-off-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-17Input: drop owner assignment from i2c_driverKrzysztof Kozlowski-42/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16regmap: Use reg_sequence for multi_reg_write / register_patchNariman Poushin-6/+6
Separate the functionality using sequences of register writes from the functions that take register defaults. This change renames the arguments in order to support the extension of reg_sequence to take an optional delay to be applied after any given register in a sequence is written. This avoids adding an int to all register defaults, which could substantially increase memory usage for regmaps with large default tables. This also updates all the clients of multi_reg_write/register_patch. Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16drivers: max77843: Switch to common max77693 state containerKrzysztof Kozlowski-1/+2
Switch to the same definition of state container as in MAX77693 drivers. This will allow usage of one regulator driver in both devices: MAX77693 and MAX77843. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16drivers: max77693: Move state container to common headerKrzysztof Kozlowski-0/+1
This prepares for merging some of the drivers between max77693 and max77843 so the child MFD driver can be attached to any parent MFD main driver. Move the state container to common header file. Additionally add consistent 'i2c' prefixes to its members (of 'struct i2c_client' type). Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16Input: elantech - force resolution of 31 u/mmPeter Hutterer-5/+8
All Elantech touchpads pre-v4 with dynamic resolution queries have a fixed resolution of 800dpi -> 31.49 units/mm. Set this statically, so userspace does not have to guess. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: zforce - don't overwrite the stackOleksij Rempel-1/+1
If we get a corrupted packet with PAYLOAD_LENGTH > FRAME_MAXSIZE, we will silently overwrite the stack. Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: ambakmi - fix system PM by converting to modern callbacksUlf Hansson-3/+5
The legacy system PM support has long time ago been dropped from the AMBA bus. Align to that by converting to the modern system PM callbacks. Fixes: 26825cfd90f9 (ARM: 7914/1: amba: Drop legacy PM support ...) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: i8042 - add unmask_kbd_data optionStephen Chandler Paul-7/+54
A big problem with the current i8042 debugging option is that it outputs data going to and from the keyboard by default. As a result, many dmesg logs uploaded by users will unintentionally contain sensitive information such as their password, as such it's probably a good idea not to output data coming from the keyboard unless specifically enabled by the user. Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by: Andreas Mohr <andim2@users.sf.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-15input: keyboard: imx: add snvs power key driverRobin Gong-0/+239
add snvs power key driver. It work in imx chips after i.mx6sx ON/OFF key used power on/off whole system. This driver make it wakeup from suspend state when short press ON/OFF key. Long time press will trig SNVS power off chip without software intervention. Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-07-11Input: wdt87xx_i2c - change the sleep time to 2500ms after the sw resetHungNien Chen-1/+2
The original wait time was 200ms which was enough for the firmware to finish loading and boot. After that the firmware will perform initialization and touch calibration, which will take about 1.1 second. The touch calibration will change controller frequency to scan at the most optimal frequency and during calibration/frequency switching process we may run into i2c data errors. To avoid them we extend the sleep to 2500ms after issuing the sw reset. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: wdt87xx_i2c - populate vendor and product in input deviceHungNien Chen-1/+45
These attributes can be used to identify controllers present in the system. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: pixcir_i2c_ts - use standard OF touchscreen parsing codeDmitry Torokhov-51/+44
Let's switch to using standard touchscreen device properties parsing module instead of doing it by hand in the driver. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: pixcir_i2c_ts - simplify input device initializationDmitry Torokhov-5/+0
input_mt_init_slots() will perform necessary settings for performing multi-touch to single-touch emulation, we do not need to do that ourselves. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: pixcir_i2c_ts - add RESET gpioRoger Quadros-0/+22
The controller has a RESET pin which is usually controlled over a GPIO line. If such a GPIO is provided, perform a RESET during probe. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: pixcir_i2c_ts - allow using with GPIO expandersDmitry Torokhov-1/+1
We are using threaded interrupt handler and thus are allowed to sleep. Let's switch over to gpiod_get_value_cansleep() so that we do not get ugly warnings in case GPIO controller might sleep when accessing GPIO. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: pixcir_i2c_ts - switch the device over to gpiodDmitry Torokhov-17/+9
This allows uniform parsing on legacy, DT and ACPI systems. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: pixcir_i2c_ts - move platform dataDmitry Torokhov-1/+1
Let's move driver's platform data definitions from include/linux/input/ into include/linux/platform_data/ so that it stays with the rest of platform data definitions. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: of_touchscreen - switch to using device propertiesDmitry Torokhov-31/+35
Let's switch form OF to device properties so that common parsing code could work not only on device tree but also on ACPI-based platforms. Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: of_touchscreen - fix setting max values on X/Y axisDmitry Torokhov-4/+6
The binding specification says that "touchscreen-size-x" and "-y" specify horizontal and vertical resolution of the touchscreen and therefore maximum absolute coordinates should be reduced by 1 since we are starting with 0. Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Input: of_touchscreen - always issue warning if axis is not set upDmitry Torokhov-7/+3
Do issue warning about axis that is present in device tree but not specified by the driver even in case of multi-touch axis as callers now tell us if they expect multi-touch data or not. Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-11Merge branch 'for-linus' of ↵Linus Torvalds-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST
2015-07-10Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors"Dmitry Torokhov-1/+1
This reverts commit 63c4fda3c0bb841b1aad1298fc7fe94058fc79f8 as it causes issues with detecting 3-finger taps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481 Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2015-07-09Input: uinput - switch to using for_each_set_bit()Anshul Garg-4/+2
Use for_each_set_bit to check for set bits in bitmap as it is more efficient and compact. Signed-off-by: Anshul Garg <aksgarg1989@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-08Input: ff-core - use for_each_set_bit where appropriateAnshul Garg-3/+2
Use for_each_set_bit to check for set bits in bitmap as it is more efficient than checking individual bits. Signed-off-by: Anshul Garg <aksgarg1989@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-08Input: joydev - use for_each_set_bit where appropriateAnshul Garg-6/+5
Use for_each_set_bit to check for set bits in bitmap as it is more efficient than checking individual bits. Signed-off-by: Anshul Garg <aksgarg1989@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-08Input: drv260x/drv2665/drv2667 - constify reg_default tablesAxel Lin-3/+3
These reg_default tables are not modified after initialized, so make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-08Input: zforce_ts - convert to use the gpiod interfaceDirk Behme-28/+30
Use the new GPIO descriptor interface to handle the zForce GPIOs. This simplifies the code and allows transparently handle GPIO polarity, as specified in device tree data. Also switch to using gpio_{set|get}_value_cansleep() since none of the callers is in atomic context and cansleep variant allows more GPIO controllers to be used with the touchscreen. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-07Input: bma150 - use sign_extend32() for sign extendingMartin Kepplinger-4/+3
Despite it's name, sign_extend32() is used for 16 bit values aswell. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-07Input: elan_i2c - change the hover event from MT to STduson-7/+5
The firmware only reports hover condition while the very first contact is approaching the surface; the hover is not reported for the subsequent contacts. Therefore we should not be using ABS_MT_DISTANCE to report hover but rather its single-touch counterpart ABS_DISTANCE. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-06x86/asm/tsc: Rename native_read_tsc() to rdtsc()Andy Lutomirski-4/+4
Now that there is no paravirt TSC, the "native" is inappropriate. The function does RDTSC, so give it the obvious name: rdtsc(). Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/fd43e16281991f096c1e4d21574d9e1402c62d39.1434501121.git.luto@kernel.org [ Ported it to v4.2-rc1. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/asm/tsc, drivers/input/gameport: Replace rdtscl() with native_read_tsc()Andy Lutomirski-2/+2
It's unclear to me why this code exists in the first place. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: linux-input@vger.kernel.org Link: http://lkml.kernel.org/r/9e058e72f4cf1f13c6483c1360b39c3d188a2c2a.1434501121.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/asm/tsc, input/joystick/analog: Switch from rdtscl() to native_read_tsc()Andy Lutomirski-2/+2
This timing code is hideous, and this doesn't help. It gets rid of one of the last users of rdtscl(), though. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: linux-input@vger.kernel.org Link: http://lkml.kernel.org/r/90d19b3cea0e05ca6f333d1598daa38afb993260.1434501121.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-04Merge branch 'for-linus' of ↵Linus Torvalds-74/+1293
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "A new driver for Weida wdt87xx touch controllers, and a bunch of fixups for other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR event Input: wdt87xx_i2c - remove stray newline in diagnostic message Input: arc_ps2 - add HAS_IOMEM dependency Input: wdt87xx_i2c - fix format warning Input: improve parsing OF parameters for touchscreens Input: edt-ft5x06 - mark as direct input device Input: use for_each_set_bit() where appropriate Input: add a driver for wdt87xx touchscreen controller Input: axp20x-pek - fix reporting button state as inverted Input: xpad - re-send LED command on present event Input: xpad - set the LEDs properly on XBox Wireless controllers Input: imx_keypad - check for clk_prepare_enable() error
2015-07-03Merge branch 'next' into for-linusDmitry Torokhov-74/+1293
Prepare second round of input updates for 4.2 merge window.
2015-07-01Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR eventHungNien Chen-5/+14
Get the scaling factor when it reads the sys params. The width value will multiple the factor and report the value in the TOUCH_MAJOR event. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-24 14:50:24 +0000