summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorLines
2010-12-27Input: i8042 - add Acer Aspire 5100 to the Dritek listPali Rohár-0/+7
This patch adds notebook Acer Aspire 5100 to the list of Dritek HW. Acer Aspire 5100 needs Dritek keyboard extension to support all Fn keys. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-23Input: wacom - add support for digitizer in Lenovo W700Ajay Ramaswamy-0/+8
Signed-off-by: Ajay Ramaswamy <ajay@ramaswamy.net> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-23Input: psmouse - disable the synaptics extension on OLPC machinesAndres Salomon-0/+30
OLPC has switched to a Synaptics touchpad. It turns out that it's pretty useless in absolute mode. This patch looks for an OLPC system (via DMI tables), and refuses to init Synaptics mode in that scenario (falling back to relative mode). Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-23Input: psmouse - fix up Synaptics commentAndres Salomon-2/+2
Minor comment fixup for typos and grammar. Noticed while adding a separate workaround. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-22Keyboard: omap-keypad: use matrix_keypad.hJanusz Krzysztofik-22/+19
Most keypad drivers make use of the <linux/input/matrix_keypad.h> defined macros, structures and inline functions. Convert omap-keypad driver to use those as well, as suggested by a compile time warning, hardcoded into the OMAP <palt/keypad.h>. Created against linux-2.6.37-rc5. Tested on Amstrad Delta. Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to board-h4. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22Merge branch 'master' into for-nextJiri Kosina-171/+517
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-22Input: synaptics - ignore bogus mt packetHenrik Rydberg-2/+2
In multitouch mode, at least one device (fw: 7.4 id: 0x1c0b1) sometimes sends a final main packet with x == 1. Since the normal values are above 1472, this is clearly bogus. At the same time, a two-finger touch is signaled, even though only one finger was on the pad to begin with. This patch ignores the packet altogether, removing the problem. Acked-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-21Merge branch 'pm-next' of ↵Tony Lindgren-55/+61
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-12-21Input: synaptics - add multi-finger and semi-mt supportHenrik Rydberg-3/+88
The Synaptics 2.7 series of touchpads support a mode for reporting two sets of X/Y/Pressure data (advanced gesture mode). By default, these devices report only single finger data, depriving userspace of the nowadays ubiquitous two-finger scroll gesture. Enabling advanced gesture mode also enables the multi-finger report, although the device does not claim that capability. Up to three fingers can be reported this way. While two or three fingers are touching, the normal packet is prepended by a reduced finger packet of lower resolution. From the two packets (which do not represent the actual fingers), the bounding rectangle of the individual contacts can be extracted. This information is sufficient to perform scaling gestures and a limited form of rotation gesture. The behavior has been coined semi-mt capability, and is signaled to userspace via the INPUT_PROP_SEMI_MT device property. Work to decode the advanced gesture packet: Takashi Iwai. Cleanup and testing of the original patch: Chase Douglas. Minor cleanup and testing: Chris Bagwell. Finalization and semi-mt support: Henrik Rydberg. Reported-by: Tobyn Bertram Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-21Input: synaptics - report clickpad propertyHenrik Rydberg-0/+3
With the new input property interface, it is possible to report the special quirks of a device using ioctl/sysfs. This patch sets up the device as a pointer, and reports the clickpad functionality via the INPUT_PROP_BUTTONPAD property. Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-20Input: fix double equality sign in ueventHenrik Rydberg-1/+1
Looking at the uevent stream for input devices, all properties are on the form "A=B" except the bitmap values, which are on the form "A==B". This bug has been around at least since 2007, and the input uevent code has been untouched since. The recent addition of device properties suggests this is a good time for a remedy. Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-20Input: introduce device propertiesHenrik Rydberg-0/+27
Today, userspace sets up an input device based on the data it emits. This is not always enough; a tablet and a touchscreen may emit exactly the same data, for instance, but the former should be set up with a pointer whereas the latter does not need to. Recently, a new type of touchpad has emerged where the buttons are under the pad, which changes logic without changing the emitted data. This patch introduces a new ioctl, EVIOCGPROP, which enables user access to a set of device properties useful during setup. The properties are given as a bitmap in the same fashion as the event types, and are also made available via sysfs, uevent and /proc/bus/input/devices. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-17Merge branch 'devel-board' into omap-for-linusTony Lindgren-1/+291
2010-12-16Merge branch 'next' of ↵Dmitry Torokhov-91/+188
git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt into next Conflicts: drivers/input/Makefile
2010-12-16Merge branch 'for-linus' of ↵Linus Torvalds-55/+61
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: define separate EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2 Input: wacom - add another Bamboo Pen ID (0xd4)
2010-12-16input: mt: Move tracking and pointer emulation to input-mtHenrik Rydberg-43/+120
The drivers using the type B protocol all report tracking information the same way. The contact id is semantically equivalent to ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates the driver. The situation can be improved upon by providing a common pointer emulation code, thereby removing the need for the tracking id in the driver. This patch moves all tracking event handling over to the input core, simplifying both the existing drivers and the ones currently in preparation. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16input: mt: Collect slots initialization codeHenrik Rydberg-10/+16
The MT slots devices all follow the same initialization pattern of creating slots and hinting about buffer size. Let drivers call an initialization function instead, and make sure it can be called repeatedly without side effects. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16input: mt: Break out slots handlingHenrik Rydberg-49/+63
In preparation for common code to handle a larger set of MT slots devices, move the slots handling over to a separate file. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-15Input: add ST1232 touchscreen controller driverTony SIM-5/+292
This patch introduces support for Sitronix ST1232 integrated capacitive touchscreen with LCD module. The touchscreen is multitouch capable and can report coordinates of up to two contact points. Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Reviewed-by: Trilok Soni <tsoni@codeaurora.org> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-14Input: define separate EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2Dmitry Torokhov-55/+58
The desire to keep old names for the EVIOCGKEYCODE/EVIOCSKEYCODE while extending them to support large scancodes was a mistake. While we tried to keep ABI intact (and we succeeded in doing that, programs compiled on older kernels will work on newer ones) there is still a problem with recompiling existing software with newer kernel headers. New kernel headers will supply updated ioctl numbers and kernel will expect that userspace will use struct input_keymap_entry to set and retrieve keymap data. But since the names of ioctls are still the same userspace will happily compile even if not adjusted to make use of the new structure and will start miraculously fail in the field. To avoid this issue let's revert EVIOCGKEYCODE/EVIOCSKEYCODE definitions and add EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2 so that userspace can explicitly select the style of ioctls it wants to employ. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-10Input: wacom - add another Bamboo Pen ID (0xd4)Kevin Granade-0/+3
Add the features struct and device table entry to enable yet another version of Wacom Bamboo Pen (CTL460, Product ID 0xD4). Signed-off-by: Kevin Granade <kevin.granade@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-10Merge branch 'devel-omap-irq' into omap-for-linusTony Lindgren-1/+1
2010-12-10Merge branch 'master' into upstreamJiri Kosina-912/+6341
2010-12-08Merge branch 'for-linus' of ↵Linus Torvalds-1/+291
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add new Bamboo PT (0xdb) Input: add input driver for polled GPIO buttons Input: turbografx - fix reference counting Input: synaptics - fix handling of 2-button ClickPads Input: wacom - add IDs for two new Bamboo PTs Input: document struct input_absinfo Input: add keycodes for touchpad on/off keys Input: usbtouchscreen - add support for LG Flatron T1710B
2010-12-07Input: cma3000_d0x_i2c - add MODULE_DEVICE_TABLEDmitry Torokhov-0/+2
This should allow loading this module automatically on systems that have such device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-07Input: tca6416-keypad - add support for tca6408aTony SIM-7/+16
Support 8-bit tca6408a I/O expander as a keypad. Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-07Input: wacom - add new Bamboo PT (0xdb)David Foley-0/+3
Adds new Bamboo Pen & Touch model - Bamboo P & T Special Edition Medium (CTH661/L; Product ID = 0xdb). Tested-by: Tobias Verbeke <tobias.verbeke@gmail.com> Signed-off-by: David Foley <favux.is@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-06Input: add input driver for polled GPIO buttonsGabor Juhos-0/+278
The existing gpio-keys driver can be usable only for GPIO lines with interrupt support. Several devices have buttons connected to a GPIO line which is not capable to generate interrupts. This patch adds a new input driver using the generic GPIO layer and the input-polldev to support such buttons. [Ben Gardiner <bengardiner@nanometrics.ca: fold code to use more of the original gpio_keys infrastructure; cleanups and other improvements.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-04parisc: Fix GSC PS/2 driver name for keyboard and mouseGuy Martin-1/+1
Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'. The following warnings are observed on a K410 system : [ 10.700000] name 'GSC PS/2 keyboard' [ 10.732000] ------------[ cut here ]------------ [ 10.772000] WARNING: at fs/proc/generic.c:323 [ 10.828000] Modules linked in: [ 10.916000] [ 10.916000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 10.936000] PSW: 00000000000001000000000000001111 Not tainted [ 10.992000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 11.060000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 11.124000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 11.184000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 11.248000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 11.308000] r20-23 00000000 00000028 104cd858 00000000 [ 11.372000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 11.436000] r28-31 0000002b 00000078 4fc40800 0000000d [ 11.496000] sr00-03 00000000 00000000 00000000 00000000 [ 11.560000] sr04-07 00000000 00000000 00000000 00000000 [ 11.624000] [ 11.688000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 11.704000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 11.772000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 11.836000] ORIG_R28: 4fc40940 [ 11.904000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 11.940000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 11.996000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 12.052000] Backtrace: [ 12.108000] [<10257790>] vsnprintf+0x290/0x4f4 [ 12.136000] [ 12.188000] ---[ end trace 91bf6ece17e322dd ]--- [ 12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7 [ 12.264000] name 'GSC PS/2 mouse' [ 12.344000] ------------[ cut here ]------------ [ 12.384000] WARNING: at fs/proc/generic.c:323 [ 12.436000] Modules linked in: [ 12.524000] [ 12.528000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 12.544000] PSW: 00000000000001000000000000001111 Tainted: G W [ 12.600000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 12.680000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 12.740000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 12.804000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 12.868000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 12.928000] r20-23 00000000 00000025 104cd858 00000000 [ 12.992000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 13.056000] r28-31 00000028 00000078 4fc40800 0000000d [ 13.116000] sr00-03 00000000 00000000 00000000 00000000 [ 13.180000] sr04-07 00000000 00000000 00000000 00000000 [ 13.244000] [ 13.308000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 13.324000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 13.392000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 13.456000] ORIG_R28: 4fc40940 [ 13.524000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 13.560000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 13.616000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 13.672000] Backtrace: [ 13.728000] [<10257790>] vsnprintf+0x290/0x4f4 [ 13.756000] [ 13.808000] ---[ end trace 91bf6ece17e322de ]--- [ 13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8 Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2010-12-01Input: turbografx - fix reference countingNamhyung Kim-0/+1
The ref-count of parport gained from parport_find_number() was not released in normal path. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30Input: synaptics - fix handling of 2-button ClickPadsYan Li-1/+2
Lenovo S10-3t's ClickPad is a 2-button ClickPad that reports BTN_LEFT and BTN_RIGHT as normal touchpad, unlike the 1-button ClickPad used in HP mini 210 that reports solely BTN_MIDDLE. In 0xc0-cap response, the 1-button ClickPad has the 20-bit set while 2-button ClickPad has the 8-bit set. This patch makes the kernel only handle 1-button ClickPad specially, and treat 2-button ClickPad in the same fashion as regular touchpads. This fixes kernel bug #18122 and MeeGo bug #4807. Signed-off-by: Yan Li <yan.i.li@intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30Input: wacom - add IDs for two new Bamboo PTsDavid Foley-0/+6
Add two new Bamboo Pen & Touch models: Bamboo Comic Medium (CTH661/S1; Product ID = 0xd8) Bamboo P & T Special Edition Small (CTH461/L; Product ID = 0xdA) Tested-by: IRIE Shinsuke <irieshinsuke@yahoo.co.jp> Tested-by: Andrea Cadeddu <mrernia@gmail.com> Signed-off-by: David Foley <favux.is@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30Input: use pr_fmt and pr_<level>Joe Perches-68/+72
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30Input: i8042 - use pr_<level>, pr_fmt, fix dbg and __FILE__ useJoe Perches-73/+63
Standardized message logging prefixes. Removed \n from dbg macro, added \n to each dbg call site. Removed direct use of __FILE__ from dbg, converted to pr_fmt(fmt) Added non-debug printf argument verification of dbg calls Removed "i8042.c" from printks, converted to pr_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30Input: add CMA3000 accelerometer driverHemanth V-0/+607
Add support for CMA3000 Tri-axis accelerometer, which supports Motion detect, Measurement and Free fall modes. CMA3000 supports both I2C/SPI bus for communication, currently the driver supports I2C based communication. Signed-off-by: Hemanth V <hemanthv@ti.com> Reviewed-by: Jonathan Cameron <jic23@cam.ac.uk> Reviewed-by: Sergio Aguirre <saaguirre@ti.com> Reviewed-by: Shubhrajyoti <Shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30Merge branches 'devel-cleanup', 'devel-serial' and 'devel-board' into ↵Tony Lindgren-1/+0
omap-for-linus
2010-11-30OMAP1: drop AMS_DELTA_FIQ config optionJanusz Krzysztofik-1/+0
This patches removes a config option that was used to select a FIQ handler to be build for Amstrad Delta, as required by the on-board serio interface driver. Not having any problem reports received since it was introduced in 2.6.35, the FIQ handler can now be built and initialized by default, thus reqiring no extra config option. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-22Input: iforce - clean up MakefileDmitry Torokhov-12/+3
Use <module>-y notation to specify list of objects comprising iforce module and conditionally pull in USB and RS232 support. Also remove custom compiler flags and rely on general makefile rules for enabling warnings. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-22Input: clean up Makefile (use input-core-y)Dmitry Torokhov-1/+1
The proper way to specify multi-source object is to use <name>-y instead of <name>-obj (which is deprecated) as it allows conditional inclusion of modules in the list. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-22Input: usbtouchscreen - add support for LG Flatron T1710BGlenn Sommer-0/+1
I've recently got my hands on a LG Flatron T1710B touchscreen. As other LG products, this seems to use the ITM panel. Signed-off-by: Glenn Sommer <gsommer@datanordisk.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-21Input: ct82c710 - remove a redundant serio_register_port()Axel Lin-5/+3
We already call serio_register_port() in ct82c710_probe(), thus remove a redundant serio_register_port() in ct82c710_init(). Looks like this bug is introduced by 916d83cfe5da1cda454d8b0ae233f06b58bd7f91 "Input: ct82c710 - convert to the new platform device interface" [dtor@mail.ru: also move printk to where we register port] Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-21Input: ams_delta_serio - fix wrong kfree in ams_delta_serio_exitAxel Lin-1/+0
serio_unregister_port() will call put_device() to free the memory. Thus remove kfree(ams_delta_serio) after serio_unregister_port(ams_delta_serio). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-21Input: ps2mult - fix wrong kfree in ps2mult_connect error pathAxel Lin-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-20Input: serio HIL MLC - don't deref null, don't leak and return proper errorJesper Juhl-9/+14
While reviewing various users of kernel memory allocation functions I came across drivers/input/serio/hil_mlc.c::hil_mlc_register() and noticed that: - it calls kzalloc() but fails to check for a NULL return before use. - it makes several allocations and if one fails it doesn't free the previous ones. - It doesn't return -ENOMEM in the failed memory allocation case (it just crashes). This patch corrects all of the above and also reworks the only caller of this function that I could find (drivers/input/serio/hp_sdc_mlc.c::hp_sdc_mlc_out()) so that it now checks the return value of hil_mlc_register() and properly propagates it on failure and I also restructured the code to remove some labels and goto's to make it, IMHO nicer to read. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Tested-by: Helge Deller <deller@gmx.de> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-19Input: add support for keyboards on ST SPEAr platformRajeev Kumar-0/+354
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-19Merge branch 'for-linus' of ↵Linus Torvalds-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix typo in keycode validation supporting large scancodes Input: aiptek - tighten up permissions on sysfs attributes Input: sysrq - pass along lone Alt + SysRq
2010-11-18Input: fix typo in keycode validation supporting large scancodesMattia Dongili-1/+1
Check the input_keymap_entry keycode size (u32) instead of the device's (void*) when validating that keycode value can be stored in the keymap. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=22722 Signed-off-by: Mattia Dongili <malattia@linux.it> Tested-by: Norbert Preining <preining@logic.at> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-18Input: gameport - convert to use common workqueue instead of a threadDmitry Torokhov-84/+68
Instead of creating an exclusive thread to handle gameport events (which happen rarely), let's switch to common workqueue. With the arrival of concurrency-managed workqueue infrastructure we are not concerned that our callers or callees also using workqueue (no deadlocks anymore) and it should reduce total number of threads in the system. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-18Input: serio - convert to common workqueue instead of a threadDmitry Torokhov-86/+69
Instead of creating an exclusive thread to handle serio events (which happen rarely), let's switch to using common workqueue. With the arrival of concurrency-managed workqueue infrastructure we are not concerned that our callers or callees also using workqueue (no deadlocks anymore) and it should reduce total number of threads in the system. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-18Input: qt602240_ts - fix wrong sizeof in object table allocationChris Leech-1/+1
The kcalloc call for the object table is using sizeof(struct qt602240_data) when it should be using sizeof(struct qt6602240_object), resulting in a larger allocation than is required. Signed-off-by: Chris Leech <christopher.leech@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-05 16:47:00 +0000