aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-05-07wifi: iwlwifi: trans: remove hw_wfpm_idJohannes Berg2-9/+9
We only need to have this during init in PCIe, so can just re-read the value. Do that and don't store it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.4dfa2ae2a844.I46466f2523d8760e93228cd9a93c112d371e002d@changeid
2025-05-07wifi: iwlwifi: trans: remove hw_id_strJohannes Berg2-4/+0
This has never been used, so remove it now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.4623574bdbe1.I8b09dd25702e7d7e2f0b4c61390baf73878f681d@changeid
2025-05-07wifi: iwlwifi: pass full FW info to transportJohannes Berg14-54/+54
The code currently passes only the specific image that should be loaded, but then has to pass the IML (image loader) out of band, which is confusing. Pass the full FW data together with desired image type, and use the IML from that. This also cleans up the code in the various sub-drivers a bit as they no longer have to look up and check for the image. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.eac4006e81c5.Iebadc56bb2762e5f4d71f66bb2609d74b33daf11@changeid
2025-05-07wifi: iwlwifi: handle reasons recommended by FW for leaving EMLSRSomashekhar Puttagangaiah4-13/+66
FW sends new notification version 2 indicating whether activating EMLSR mode is recommended or not. If recommendation is to leave EMLSR or force leave then FW sends the reason. Add debug log for the reason sent by FW. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.0582726248a4.I9d1d00eb98d10a3a742cb3e06665ce10e5ec93f0@changeid
2025-05-07wifi: iwlwifi: remove PM mode and send-in-D3Johannes Berg7-66/+27
Simplify the logic here by tracking only suspended as a status bit, and remove CMD_SEND_IN_D3 completely. There is no value, since the op-mode sets the state and also sends the commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.cc3360761f1e.I72261afc42cee8983198b4660b7d38b7df7963da@changeid
2025-05-07wifi: iwlwifi: unexport iwl_trans_pcie_send_hcmd()Johannes Berg1-1/+0
It doesn't need to be exported since the code calling it is in the same module. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.f457a737c663.I8d49b2955a4f2ca47deb664e5fd58e39d612bb63@changeid
2025-05-07wifi: iwlwifi: pcie: move wait_command_queue into PCIeJohannes Berg6-10/+11
There's no reason for this to be declared in the transport struct, so move the item to the PCIe struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.793f625c5c2d.I64ebb402255d84c2ad045a65e5a4e4891ead5b26@changeid
2025-05-07wifi: iwlwifi: pcie: move invalid TX CMD into PCIeJohannes Berg4-10/+17
There's no reason for this to be in the generic transport struct, move it into the PCIe code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.d4916769a25b.Ife9b0283e50023efb6b3f44e81a6ff3885fe5a8d@changeid
2025-05-07wifi: iwlwifi: pcie: move ME check data to pcieJohannes Berg4-18/+22
There's no reason for this data to be in the generic transport struct, so move it to pcie. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.0b74726b2651.I2c6bff6945b9288eadf242895906ab1c2cb76389@changeid
2025-05-07wifi: iwlwifi: pcie: rename "continuous" memoryJohannes Berg1-15/+11
What's really meant here is "contiguous", appreviate it as "contig". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.8c2ccc0a7469.I6ef88a48c2a2e5c0baa881382017d34eb07f9316@changeid
2025-05-07wifi: iwlwifi: remove iwl_cmd_groups_verify_sorted()Johannes Berg2-19/+0
We now have unit tests for the mvm and mld, and dvm isn't going to change anyway. Remove the runtime checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.e3f01789575d.I4380dcbf3e0ecabc2a8a42c84f448b7dd854bf50@changeid
2025-05-07wifi: iwlwifi: mvm: add command order checks to kunitJohannes Berg4-2/+50
We can test this with kunit instead of having the runtime checks, add a test here to remove the runtime check next. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.581b60b0833f.I624fb3efc3fa0b155a5da69d7efc39207f133331@changeid
2025-05-06Merge tag 'wireless-next-2025-05-06' of ↵Jakub Kicinski38-275/+337
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless features, notably * stack - free SKBTX_WIFI_STATUS flag - fixes for VLAN multicast in multi-link - improve codel parameters (revert some old twiddling) * ath12k - Enable AHB support for IPQ5332. - Add monitor interface support to QCN9274. - Add MLO support to WCN7850. - Add 802.11d scan offload support to WCN7850. * ath11k - Restore hibernation support * iwlwifi - EMLSR on two 5 GHz links * mwifiex - cleanups/refactoring along with many other small features/cleanups * tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits) Revert "wifi: iwlwifi: clean up config macro" wifi: iwlwifi: move phy_filters to fw_runtime wifi: iwlwifi: pcie: make sure to lock rxq->read wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2 wifi: iwlwifi: clean up config macro wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status() wifi: iwlwifi: mld: rx: simplify channel handling wifi: iwlwifi: clean up band in RX metadata wifi: iwlwifi: mld: skip unknown FW channel load values wifi: iwlwifi: define API for external FSEQ images wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands wifi: iwlwifi: mld: use cfg80211_chandef_get_width() wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return wifi: iwlwifi: mld: clarify variable type wifi: iwlwifi: pcie: add support for the reset handshake in MSI wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled wifi: mac80211: restructure tx profile retrieval for MLO MBSSID wifi: nl80211: add link id of transmitted profile for MLO MBSSID wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values wifi: mac80211: update ML STA with EML capabilities ... ==================== Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-06wifi: iwlwifi: add support for Killer on MTLJohannes Berg1-0/+2
For now, we need another entry for these devices, this will be changed completely for 6.16. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219926 Link: https://patch.msgid.link/20250506214258.2efbdc9e9a82.I31915ec252bd1c74bd53b89a0e214e42a74b6f2e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-06wifi: iwlwifi: pcie: don't call itself indirectlyJohannes Berg3-10/+11
There's no reason for pcie code to call itself indirectly, directly use the pcie functions instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Yedidya Ben Shimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.52db0b9fba15.I062e766ded86f61ec86104c28b84767f1c29ea78@changeid
2025-05-06wifi: iwlwifi: cfg: remove unnecessary configsJohannes Berg2-559/+111
Since there are two bytes hole in struct iwl_dev_info, add a subdev_mask to match with. Also, since the PCI IDs list needs to match first, and the dev-info list is matched from the bottom up, remove unnecessary entries. With this, even though there are new entries from previous changes, the overall size is slightly reduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.689f9b335cbe.I66f1344b6ac7aa3665696637c97fa843c2307423@changeid
2025-05-06wifi: iwlwifi: cfg: reduce mac_type to u8Johannes Berg2-4/+4
In theory, this should be 12 bits, but in practice all the values we use now fit into 8 bits, so change the mac_type to make room in struct iwl_dev_info. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.c17d56f4ae0f.I487c8df18aa33c46aa6813bf5aebb5a23da67600@changeid
2025-05-06wifi: iwlwifi: tests: check for duplicate name stringsJohannes Berg1-0/+19
We don't need the same name multiple times in the binary, add a check for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.9adf2790122e.Ia85152c072c7944f0b80e819cf59a51d6adeb49a@changeid
2025-05-06wifi: iwlwifi: cfg: move all names out of configsJohannes Berg5-43/+29
Move all the names into dev info structs and remove the pointer from the configs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.1538369bffde.Id430ff71f57cbb37c19ecc5b41c831e5ba9b0695@changeid
2025-05-06wifi: iwlwifi: cfg: finish config splitJohannes Berg14-794/+1471
A long time ago, when transport vs. device configs were introduced, we wanted to eventually have a list of PCI IDs and a separate list of devices, but for simplicity embedded the transport config in the whole config, and it all got confusing. Finish splitting that out. Doing so requires having more IWL_DEV_INFO() entries, but the whole trans/cfg aliasing goes away and the code becomes a lot simpler. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.e03f65c0f693.I076a997f800db455b575008f9488b151738ad7ec@changeid
2025-05-06wifi: iwlwifi: cfg: minor fixes for ScJohannes Berg1-10/+7
Remove the erroneously named IWL_DEVICE_BZ_COMMON macro from the Sc file and fix some indentation. Also bump the minimum FW version since it's not released yet anyway, right now this is mostly to make the config different from iwl_bz_cfg which would otherwise be the same with the upcoming transport config cleanups. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.b313d54b8809.Ia975b6d5460996f2a2761dd3d0fef4a56f1f3e24@changeid
2025-05-06wifi: iwlwifi: pcie: remove 'ent' argument from allocJohannes Berg3-5/+4
The alloc function iwl_trans_pcie_alloc() doesn't use the 'ent' argument, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.0351805072bc.Id309b38817edc116bf9a921608a93b7734f21b05@changeid
2025-05-06wifi: iwlwifi: cfg: rename BW_NO_LIMIT to BW_NOT_LIMITEDJohannes Berg1-34/+34
It's not clear that it makes sense to have any matches for IWL_CFG_ANY for this bit, but let's assume for now that this makes sense. Then, it's clearer to call this BW_NOT_LIMITED rather than BW_NO_LIMIT, since the last change. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.9b39693b505c.Ib47aa6a072a0e61bbba28383ce54764cd859f19c@changeid
2025-05-06wifi: iwlwifi: cfg: clean up BW limit and subdev matchingJohannes Berg10-243/+327
The BW limit, cores and RF ID are matched in the subdevice ID, so it doesn't really make sense to have both SUBDEV() match and a match on any of those three. In particular, for Killer devices the subdevice ID doesn't even follow the layout, so no matching should be on those three values at all, only with SUBDEV(). Change the logic around the BW limit to have it more like all the other things: only a bw_limit match in the dev_info, and put the actual bandwidth into struct iwl_cfg. This duplicates a number of those values, but that way the logic is clearer. Add a test that checks that the three matches mentioned above are not used in conjunction with SUBDEV(), and check that if the bw_limit is matched, a BW limit is provided in the config. Also check that the "Killer" devices have a SUBDEV() match. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.a185eac2736c.I87ee87300c92518a1d3296d3eda9fd4163e9085e@changeid
2025-05-06wifi: iwlwifi: tests: check transport configs are not duplicatedJohannes Berg3-1/+50
Add a kunit test to check that all (used) transport config structs are not duplicated, since there's no value in having the same info in two places in memory. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.a151af19aaba.Id57f099a899e09318c6218ed1859151f00232b41@changeid
2025-05-06wifi: iwlwifi: tests: check configs are not duplicatedJohannes Berg1-0/+47
Add a kunit test to check that all (used) config structs are not duplicated, ignoring the name since that can be handled differently via the dev-info list. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.0cfd9fb8322e.I9567b839405be8d1e4be0bfca7a17b5d222b0158@changeid
2025-05-06wifi: iwlwifi: cfg: remove iwl_cfg_brJohannes Berg3-6/+1
This is the same as iwl_cfg_dr, just different by the MAC, so no need to keep a separate config; remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.83b86e8a182b.Iec7f3027e7058005a98ff6d05cc224ab61b7c44a@changeid
2025-05-06wifi: iwlwifi: cfg: remove duplicated Sc device configsJohannes Berg3-20/+10
The configurations for Sc, Sc2 and Sc2f are all the same, so keep just a single config struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.2bab15a21306.I079987bc4a1679789bacc1078952aa90c805ffe0@changeid
2025-05-06wifi: iwlwifi: cfg: remove duplicated iwl_cfg_glJohannes Berg3-10/+2
This really is the same device as covered by iwl_cfg_bz, just the discrete version. Since discrete vs integrated is handled in the transport config, there's no need to have both. Remove iwl_cfg_gl. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.fbb78183dc85.Ic5429009677ae1023cf1f43a655e90409a30c493@changeid
2025-05-06wifi: iwlwifi: cfg: remove iwl_ax201_cfg_qu_hrJohannes Berg3-72/+65
We can handle the name differently, so do that and remove the extra config entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.17fc47c72232.I2cb4476b9bca6e770bd375ad6ce650553dbde0f1@changeid
2025-05-06wifi: iwlwifi: cfg: remove max_tx_agg_sizeJohannes Berg3-37/+0
This was used in some really old devices, and then got carried forward to Qu devices, even though on those we don't need it at all since the TX aggregation start is offloaded to the firmware. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.9c2689e2ca8e.I8274b29ca64d9ef9d1e357bbe34ca3a4b97aeb7a@changeid
2025-05-06wifi: iwlwifi: cfg: remove unused config externsJohannes Berg1-2/+0
There are two killer configs that no longer exist, remove the externs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.64977630101f.I9997a72027d37249620a78091759fa44f9d32c87@changeid
2025-05-06wifi: iwlwifi: cfg: unify Killer 1650s/i with Qu/HrJohannes Berg3-42/+14
These configs are the same except for the name, but we can use a separate per-device name to override the name. So do that, and remove the separate configs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a0a8ebbd473a.Iad8bff04138538a8bc9f7920077ea24a699b1ed4@changeid
2025-05-06wifi: iwlwifi: cfg: unify Qu/QuZ configsJohannes Berg4-104/+26
Now that the fw_name_mac is no longer around and derived from the MAC type automatically, we no longer need to have different configurations for Qu/QuZ. Combine them. For the killer AX1650s/i, also fix the names, there was a mixup. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.957fbb5437ce.If51ad0b2c8afaaa131208125af3bc292793613bb@changeid
2025-05-06wifi: iwlwifi: cfg: remove fw_name_macJohannes Berg7-28/+49
Instead of having fw_name_mac in the config, derive it from the MAC type instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.8dba9a2d3546.I41fa594d6a0be163444b90c1ed4b441a949d3899@changeid
2025-05-06wifi: iwlwifi: tests: check for device namesJohannes Berg1-0/+12
Add a unit test that checks that each device has a name, either via the specific name entry or the config's name. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.c04287134280.Iedc7c05a41dc8bfe04dc8b95fea38543513eac2d@changeid
2025-05-06wifi: iwlwifi: pcie: add entry for Killer AX1650i on AdL-PJohannes Berg1-0/+3
On AdL-P, we're missing an entry for the Killer(R) Wi-Fi 6 AX1650i 160 MHz adapter. Add an entry to fix that. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219114 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.483214386aa4.Iad4d2041bfe544875fe9f5c051e23a765f862786@changeid
2025-05-06wifi: iwlwifi: unify some configurationsJohannes Berg3-150/+64
Rather than having individual entries for different MAC and RF steps, unify the entries by using fw_name_mac and remove the now duplicated ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.b93f34a65822.I57b8235acb675cb6b4e97df2f4a7365f3d9bff18@changeid
2025-05-06wifi: iwlwifi: remove duplicated lineMiri Korenblit1-2/+0
This line was duplicated by mistake, remove one occurrence. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a2601e0a08e0.Ie72fadec40e41b8197bfdae16eaa430c64a3e62d@changeid
2025-05-06wifi: iwlwifi: pcie: Add support for new device idsSomashekhar Puttagangaiah3-0/+5
Add device support for PeP on ScP Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a66928fcc82a.Icbbc7c28855f8de232cb3916901a4da3ac286117@changeid
2025-05-06wifi: iwlwifi: remove TH/TH1 RF typesJohannes Berg2-8/+6
There are the same values as JF2/JF1 respectively, and that really matches the code names. Remove TH/TH1. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.7677cffdfae2.Idd76734c310cf5f27de43d24e71b27467ab5905a@changeid
2025-05-06wifi: iwlwifi: clean up config macroJohannes Berg2-637/+541
The IWL_DEV_INFO() macro has far too many arguments, and most of the time they're just "ANY". Use C99 initializers in the macro to clean that up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.42318bb31f0e.Ic3a40afcd182b6e1802bb8f8a1a845b20608e328@changeid
2025-05-06wifi: iwlwifi: mvm: remove nl80211 testmodeJohannes Berg4-136/+2
This was used in the past for NoA and/or beacon filter testing, but these days everything is tested via debugfs or special FW commands, so remove the testmode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.751018e0ed8e.I21557a9a3d57234187f1b0b2182a1714ecc66b9a@changeid
2025-05-06wifi: iwlwifi: mld: set rx_mpdu_cmd_hdr_sizeJohannes Berg1-0/+1
Set rx_mpdu_cmd_hdr_size so that tracing will correctly include the frame header. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.caf1d8e2bae3.I82d89bc8d128f78159a8a11b1573574dacdeb99e@changeid
2025-05-06wifi: iwlwifi: dvm: fix various W=1 warningsJohannes Berg5-33/+30
Fix warnings occurring with W=1, mostly const and one about pointer arithmetic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.3ef1e4f1cccb.Ic41d3f3721e8bd9df9cd50242232110c4a93e873@changeid
2025-05-06wifi: iwlwifi: mld: force the responder to use the full bandwidthAvraham Stern1-0/+3
When a soft AP is started, it may not use the full configured bandwidth (e.g. if no station is connected). As a result, the responder will not support the configured bandwidth. Since the responder supports ranging with unassociated stations, there is no indication to the driver when the full bandwidth should be enabled. Fix it by configuring the AP to always use the full bandwidth when a responder is supported. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.620fe8099fff.Id50675f4d4c524b0a7ee602c48af538a327010e0@changeid
2025-05-06wifi: iwlwifi: mld: start AP with the correct bandwidthAvraham Stern4-2/+24
When a channel context is added, it is still not assigned to the link and the link is not yet active. As a result, the channel context min_def is used when the AP is started, even when the full bandwidth should be used. Fix it by updating the PHY channel context when the link is already active so the full bandwidth is used when needed. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.30b043b10fb1.I62c2aa58687e4796b759fa68132122119a337b49@changeid
2025-05-06wifi: iwlwifi: mld: add monitor internal stationDaniel Gabay6-3/+60
This is needed for TX injection over monitor interface. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.5ec460d3f1c2.Ic8456efb4cdd722dcd9c4910a1569ef9d3e4e066@changeid
2025-05-06wifi: iwlwifi: mld: support for COMPRESSED_BA_RES_API_S_VER_7Emmanuel Grumbach2-4/+7
The rate format changed but since we don't use the rate, just claim support for this new API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.c4be90e242ff.Ie8a0f0d6320613bd8c5cb6c82a063069fffa3b67@changeid
2025-05-06wifi: iwlwifi: mvm: support iwl_mac_power_cmd version 2Miri Korenblit2-2/+6
This version fixes the issue that was worked around by iwl_mvm_smps_workaround. So for FWs with the new version don't do the workaround, and set new bit added in this version when appropriate. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.5c9a0181a84b.I9a03bc07a7b3f6e37cc1c0c1af5719e765a05897@changeid
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-27 07:25:24 +0000