| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This reverts commit e4df3a0b6228
("i2c: core: Dispose OF IRQ mapping at client removal time")
Calling irq_dispose_mapping() will destroy the mapping and disassociate
the IRQ from the IRQ chip to which it belongs. Keeping it is OK, because
existent mappings are reused properly.
Also, this commit breaks drivers using devm* for IRQ management on
OF-based systems because devm* cleanup happens in device code, after
bus's remove() method returns.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[wsa: updated the commit message with findings fromt the other bug report]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Fixes: e4df3a0b6228
|
|
If rockchip_usb_phy_power() fails, we need to call clk_disable_unprepare()
before return. This is to ensure we have balanced clk_enable/disable calls.
Also remove unneeded ret checking in rockchip_usb_phy_power_off.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Code simplification. No functional change.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Current code uses num_phys settings to tell the number of entries in phys.
Thus remove the NULL terminating entry from phys array which is not necessary.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
This prevent NULL pointer dereference if res is NULL.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
If IS_ERR(state->regs) the .probe fails.
So IS_ERR(state->regs) test in exynos_dp_video_phy_pwr_isol() is not necessary.
exynos_dp_video_phy_pwr_isol() simply does a regmap_update_bits() call now,
just call regmap_update_bits() instead and return proper return value.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
This fixes a performance regression introduced by
7fbb9d8415d4a51cf542e87cf3a717a9f7e6aedc (xen-netback: release pending
index before pushing Tx responses)
Moving the notify outside of the spin locks means it can be delayed a
long time (if the dealloc thread is descheduled or there is an
interrupt or softirq).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers compare struct clk pointers as a means of knowing
if the two pointers reference the same clock hardware. This behavior is
dubious (drivers must not dereference struct clk), but did not cause any
regressions until the per-user struct clk patch was merged. Now the test
for matching clk's will always fail with per-user struct clk's.
clk_is_match is introduced to fix the regression and prevent drivers
from comparing the pointers manually.
Fixes: 035a61c314eb ("clk: Make clk API return per-user struct clk instances")
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[sboyd@codeaurora.org: const arguments to clk_is_match() and
remove unnecessary ternary operation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
type T;
identifier f;
@@
static T f (...) { ... }
@@
identifier r.f;
declarer name EXPORT_SYMBOL_GPL;
@@
-EXPORT_SYMBOL_GPL(f);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Fixes: 035a61c314eb "clk: Make clk API return per-user struct clk instances"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Starting with commit b4b55cda5874
("x86/PCI: Refine the way to release PCI IRQ resources")
the device lost its irq resource on module unload. While that's ok and
apparently intentional, the driver never got the resource back on module load
The code apparently wants drivers to disable the pci device at pci device
driver removal, so lets do that. That fixes the issue.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
|
|
cppcheck on lines 917 and 977 show an ineffective assignment
to the dma buffer pointer:
[drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:917]:
[drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:977]:
(warning) Assignment of function parameter has no effect
outside the function. Did you forget dereferencing it?
On a successful DMA buffer lookup, the dma buffer pointer is
assigned, however, on failure it currently is left in an
undefined state.
The original intention in the error exit path was to nullify
the pointer on an error (which the original code failed to
do properly). This patch fixes this also ensures all failure
paths nullify the buffer pointer on the error return.
Fortunately the callers to vmw_translate_mob_ptr and
vmw_translate_guest_ptr are checking on a return status and not
on the dma buffer pointer, so the original code worked.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
|
|
To take down the MOB and GMR memory types, the driver may have to issue
fence objects and thus make sure that the fence manager is taken down
after those memory types.
Reorder device init accordingly.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
|
|
Experimental lockdep annotation added to the TTM lock has unveiled a
couple of lock dependency violations in the vmwgfx driver. In both
cases it turns out that the device_private::reservation_sem is not
needed so the offending code is moved out of that lock.
Cc: <stable@vger.kernel.org>
Acked-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
This device disconnects every 60s without X
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Trying to write console output from within the serial console driver
while the port->lock is held causes recursive deadlock:
CPU 0
spin_lock_irqsave(&port->lock)
printk()
console_unlock()
call_console_drivers()
serial8250_console_write()
spin_lock_irqsave(&port->lock)
** DEADLOCK **
The 8250_dw i/o accessors try to write a console error message if the
LCR workaround was unsuccessful. When the port->lock is already held
(eg., when called from serial8250_set_termios()), this deadlocks.
Make the error message a FIXME until a general solution is devised.
Cc: Tim Kryger <tim.kryger@gmail.com>
Reported-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ef11982dd7a657512c362242508bb4021e0d67b6.
That commit creates a problem for some UDCs (at least musb)
where it allocates an endpoints with a 64-byte FIFO, but later
tries to use that same FIFO for 1024-byte packets.
Before implementing this, composite framework needs to be
modified so we only allocate endpoints after we know negotiated
speed, however that needs quite a bit of extra work.
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses by disabling memory and/or I/O decoding
and subsequently causing (CPU side) accesses to the respective address
ranges, which (depending on system configuration) may be fatal to the
host.
Note that to alter any of the bits collected together as
PCI_COMMAND_GUEST permissive mode is now required to be enabled
globally or on the specific device.
This is CVE-2015-2150 / XSA-120.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
This reverts commit 02b03846bb2befc558bfd0665749d6bb26f4c2f1.
Alan writes:
it seems there is a regression in there for some configuration of I/O
based devices. I'll take a look at it over the next couple of kernel
releases and see what is up then resubmit it with fixes.
Reported-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit c3762b248faf9db2b00b36c0535f79758942069e.
The file this fixes is about to be reverted.
Reported-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit d885d4f3728f386034bb2f7a61b7f2054c49b2d4 as the
patch that it fixes is about to be reverted.
Reported-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 27082e2654dc ("xhci: Clear the host side toggle manually")
Turns out this fix to enable soft resetting endpoints wasn't mature enough.
It caused regression with some usb DVB-T devices and needs some more tuning
to get the endpiont ring pointers set correctly.
The original commit was tagged for stable 3.18, and should be reverted
from there as well.
Cc: stable <stable@vger.kernel.org> # v3.18
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just keep it working, seems to fix some PLL problems.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
A normal wait adds to the front of the tail. By doing something
similar to fence_default_wait the fence code can run without racing.
This is a complete fix for "panic on suspend from KDE with radeon",
and a partial fix for "Radeon: System pauses on TAHITI". On tahiti
si_irq_set needs to be fixed too, to completely flush the writes
before radeon_fence_activity is called in radeon_fence_enable_signaling.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90741
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90861
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Reported-by: Jon Arne Jørgensen <jonjon.arnearne@gmail.com>
Reported-and-tested-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Cc: stable@vger.kernel.org (v3.18+)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The state->regmap is initialized by devm_regmap_init_mmio().
So it's fine to use spin_lock rather than mutex to protct state->regmap rmw
operations.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
[Julia.Lawall@lip6.fr: Found an issue with the original patch w.r.t unbalanced
spin_lock call]
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Pull MTD fixes from Brian Norris:
* pxa3xx_nand
- fix timeout issues when draining the FIFO (BCH only)
- don't crash when no chip-selects are used
* hisi504_nand
- depend on HAS_DMA, to fix compile errors
* tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd:
mtd: nand: MTD_NAND_HISI504 should depend on HAS_DMA
mtd: pxa3xx_nand: fix driver when num_cs is 0
mtd: nand: pxa3xx: Fix PIO FIFO draining
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"The patches contain:
- fix multiple ARM IOMMU drivers to behave well when the hardware is
not present
- mark MSM driver as broken
- fix build errors with the new ARM generic io-page-table code"
* tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/io-pgtable-arm: Add built time dependency
iommu/msm: Mark driver BROKEN
iommu/rockchip: Play nice in multi-platform builds
iommu/omap: Play nice in multi-platform builds
iommu/exynos: Play nice in multi-platform builds
iommu/io-pgtable-arm: Fix self-test WARNs on i386
|
|
This fixes a potential null pointer dereference.
Cc: <stable@vger.kernel.org> # v3.16+
Fixes: d4332013919a ("driver core: dev_get_drvdata: Don't check for NULL dev")
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
When dwc2 controller detects a disconnect interrupt,
dwc2_hcd_disconnect() should be called immediately to do clean-up
jobs and set port_connect_status_change flag to notify usb hub
driver disconnect status.
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
iwlwifi:
* fix ROC removal - avoids a firmware crash
* fix throughput regression on iwldvm devices
* fix panic in BT Coex
* fixes in rate control
* fixes in scan
b43:
* fix support for 5 GHz only BCM43228 model
rtlwifi:
* improve handling of IPv6 packets
brcmfmac:
* perform bound checking on vendor command buffer
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 16e47624e76b43db ("cxgb4: Add new scheme to update T4/T5 firmware")
introduced below coccinelle warning.
>> drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:994:2-8: Replace memcpy with
struct assignment
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current driver support receive VLAN CTAG HW acceleration feature
(NETIF_F_HW_VLAN_CTAG_RX) through software simulation. There calls the
api .skb_copy_to_linear_data_offset() to skip the VLAN tag, but there
have overlap between the two memory data point range. The patch just fix
the issue.
V2:
Michael Grzeschik suggest to use memmove() instead of skb_copy_to_linear_data_offset().
Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Fixes: 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance")
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add testcase variants with '/' in the options string to test for
scan beyond end path name terminated by ':'.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Ensure proper handling of paths with appended options (after ':'),
where those options may contain a '/'.
Fixes: 7914a7c5651a ("of: support passing console options with stdout-path")
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: <stable@vger.kernel.org> # 3.19
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This patch fix the wrong expected value of of_property_match_string
in of_selftest_property_string.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove the duplicate of_changeset_init. In of_selftest_changeset
testcase, the "struct of_changeset chgset" is initialized twice,
but only once is enough. so, drop the first initializtion code.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The unittest fails to link if I2C or I2C_MUX is a loadable module:
drivers/built-in.o: In function `selftest_i2c_mux_remove':
unittest.c:(.text+0xb0ce4): undefined reference to `i2c_del_mux_adapter'
This changes the newly added IS_ENABLED() checks to use IS_BUILTIN()
instead, which evaluates to false if the other driver is a module.
Reported-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d5e75500ca401 ("of: unitest: Add I2C overlay unit tests.")
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit 3e7f7626fd49a ("of/overlay: Do not generate duplicate nodes") removed
the only use of the 'grandchild' variable, which leads to the following build
warning:
drivers/of/overlay.c: In function 'of_overlay_apply_single_device_node':
drivers/of/overlay.c:89:31: warning: unused variable 'grandchild' [-Wunused-variable]
struct device_node *tchild, *grandchild;
^
Remove this unused variable.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Support for devicetree serial consoles via 'stdout-path' causes
bootconsoles to be disabled when the vt dummy console loads, since
there is no preferred console (the preferred console is not added
until the device is probed).
Ensure there is at least a preferred console, even if never matched.
Requires: "console: Fix console name size mismatch"
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Linux 4.0-rc3
Merging in v4.0-rc3 because commit 30a22c215a00 (console: Fix
console name size mismatch) is a dependency.
|
|
Long ago I found that I was getting sporadic errors when booting SNB,
with the symptom being that the first batch died with IPEHR != *ACTHD,
typically caused by the TLB being invalid. These magically disappeared
if I held the forcewake during the entire ring initialisation sequence.
(It can probably be shortened to a short critical section, but the whole
initialisation is full of register writes and so we would be taking and
releasing forcewake almost continually, and so holding it over the
entire sequence will probably be a net win!)
Note some of the kernels I encounted the issue already had the deferred
forcewake release, so it is still relevant.
I know that there have been a few other reports with similar failure
conditions on SNB, I think such as
References: https://bugs.freedesktop.org/show_bug.cgi?id=80913
v2: Wrap i915_gem_init_hw() with its own security blanket as we take
that path following resume and reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
commit 05a2fb157e44 ("drm/i915: Consolidate forcewake code")
failed to take into account that we have used to reset both
the gen6 style and the multithreaded style forcewake registers.
This is due to fact that ivb can use either, depending on how the
bios has set up the machine.
Mimic the old semantics before we have determined the correct variety
and reset both before the ecobus probe.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This fixes a regression from
commit 5ed0bdf21a85d78e04f89f15ccf227562177cbd9
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Jul 16 21:05:06 2014 +0000
drm: i915: Use nsec based interfaces
that made a negative timeout return immediately rather than the
previously defined behaviour of waiting indefinitely.
Testcase: igt/gem_wait
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89494
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: fixed a checkpatch complaint about whitespace.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The kernel in_irq() function tests for hard-IRQ context only, so if a
system is run with the kernel 'threadirqs' option selected, the test in
intel_check_page_flip() generates lots of warnings, because then it gets
called in soft-IRQ context.
We can instead use in_interrupt() which allows for either type of
interrupt, while still detecting and complaining about misuse of the
page flip code if it is ever called from non-interrupt context.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89321
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
From the comments of gpiod_direction_output(), need to set @value
as initial output, so update the lowlevel routine to make it work.
Signed-off-by: jason.cj.chen<jason.cj.chen@intel.com>
Signed-off-by: qipeng.zha <qipeng.zha@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The interrupt is enabled before napi_complete(). A network timeout
occurs if the interrupt handler is called before napi_complete().
Fix the bug by enabling the interrupt after napi_complete().
Signed-off-by: Yongbae Park <yongbae2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The interrupt is enabled before napi_complete(). A network timeout
occurs if the interrupt handler is called before napi_complete().
Fix the bug by enabling the interrupt after napi_complete().
Signed-off-by: Yongbae Park <yongbae2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With drm-next, we can get a backtrace from sleeping
with mutex detection.
this is due to the callback checking the txmsg state taking
the mutex, which can cause a sleep inside a sleep,
Daniel went over it and was happy we could drop this mutex
in this case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"One performance optimization for page_clear and a couple of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: fix incorrect ASCE after crst_table_downgrade
s390/ftrace: fix crashes when switching tracers / add notrace to cpu_relax()
s390/pci: unify pci_iomap symbol exports
s390/pci: fix [un]map_resources sequence
s390: let the compiler do page clearing
s390/pci: fix possible information leak in mmio syscall
s390/dcss: array index 'i' is used before limits check.
s390/scm_block: fix off by one during cluster reservation
s390/jump label: improve and fix sanity check
s390/jump label: add missing jump_label_apply_nops() call
|
|
The internal framebuffers we create to remap legacy cursor ioctls to
plane operations for the universal plane support shouldn't be linke to
the file like normal userspace framebuffers. This bug goes back to the
original universal cursor plane support introduced in
commit 161d0dc1dccb17ff7a38f462c7c0d4ef8bcc5662
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Tue Jun 10 08:28:10 2014 -0700
drm: Support legacy cursor ioctls via universal planes when possible (v4)
The isn't too disastrous since fbs are small, we only create one when the
cursor bo gets changed and ultimately they'll be reaped when the window
server restarts.
Conceptually we'd want to just pass NULL for file_priv when creating it,
but the driver needs the file to lookup the underlying buffer object for
cursor id. Instead let's move the file_priv linking out of
add_framebuffer_internal() into the addfb ioctl implementation, which is
the only place it is needed. And also rename the function for a more
accurate since it only creates the fb, but doesn't add it anywhere.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (fix & commit msg)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (provider of lipstick)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
virtio balloon has this code:
wait_event_interruptible(vb->config_change,
(diff = towards_target(vb)) != 0
|| vb->need_stats_update
|| kthread_should_stop()
|| freezing(current));
Which is a problem because towards_target() call might block after
wait_event_interruptible sets task state to TAST_INTERRUPTIBLE, causing
the task_struct::state collision typical of nesting of sleeping
primitives
See also http://lwn.net/Articles/628628/ or Thomas's
bug report
http://article.gmane.org/gmane.linux.kernel.virtualization/24846
for a fuller explanation.
To fix, rewrite using wait_woken.
Cc: stable@vger.kernel.org
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
