| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Pull drm fixes from Dave Airlie:
"Regularly scheduled fixes for drm, live from a Red Hat office for the
first time in a while.
The core has two fixes, one for scheduler leak and one for aperture
uninit read.
Otherwise a single bridge fix, and msm, amdgpu/kfd and i915 have a set
of fixes each.
sched:
- Stop leaking fences when killing a sched entity.
aperture:
- Avoid uninitialized read in aperture_remove_conflicting_pci_device()
bridge:
- Fix HPD on bridge/ps8640.
msm:
- Fix shrinker deadlock
- Fix crash during suspend after unbind
- Fix IRQ lifetime issues
- Fix potential memory corruption with too many bridges
- Fix memory corruption on GPU state capture
amdgpu:
- Stable pstate fix
- SMU 13.x updates
- SR-IOV fixes
- PCI AER fix
- GC 11.x fixes
- Display fixes
- Expose IMU firmware version for debugging
- Plane modifier fix
- S0i3 fix
amdkfd:
- Fix possible memory leak
- Fix GC 10.x cache info reporting
i915:
- Extend Wa_1607297627 to Alderlake-P
- Keep PCI autosuspend control 'on' by default on all dGPU
- Reset frl trained flag before restarting FRL training"
* tag 'drm-fixes-2022-10-28' of git://anongit.freedesktop.org/drm/drm: (39 commits)
fbdev/core: Avoid uninitialized read in aperture_remove_conflicting_pci_device()
drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume
drm/scheduler: fix fence ref counting
drm/amd/display: Revert logic for plane modifiers
drm/amdkfd: correct the cache info for gfx1036
drm/amdkfd: update gfx1037 Lx cache setting
drm/amdgpu: skip mes self test for gc 11.0.3 in recover
drm/amd: Add IMU fw version to fw version queries
drm/amd/display: Don't return false if no stream
drm/amd/display: Remove wrong pipe control lock
drm/amd/pm: allow gfxoff on gc_11_0_3
drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()
drm/amdgpu: Remove ATC L2 access for MMHUB 2.1.x
drm/i915/dp: Reset frl trained flag before restarting FRL training
drm/i915/dgfx: Keep PCI autosuspend control 'on' by default on all dGPU
drm/i915: Extend Wa_1607297627 to Alderlake-P
drm/amdgpu: Adjust MES polling timeout for sriov
drm/amd/pm: update driver-if header for smu_v13_0_10
drm/amdgpu: fix pstate setting issue
drm/bridge: ps8640: Add back the 50 ms mystery delay after HPD
...
|
|
AudioReach Modules can connect to other modules using source and
destination port, and each module in theory can support up to 255 port
connections. But in practice this limit is at max 8 ports at a time.
So add support for allowing multiple port connections.
This support is needed for more detailed graphs like ECNS, speaker
protection and so.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rcv_wnd can be useful to diagnose TCP performance where receiver window
becomes the bottleneck. rehash reports the PLB and timeout triggered
rehash attempts by the TCP connection.
Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A u32 counter is added to tcp_sock for counting the number of PLB
triggered rehashes for a TCP connection. An SNMP counter is also
added to count overall PLB triggered rehash events for a host. These
counters are hooked up to PLB implementation for DCTCP.
TCP_NLA_REHASH is added to SCM_TIMESTAMPING_OPT_STATS that reports
the rehash attempts triggered due to PLB or timeouts. This gives
a historical view of sustained congestion or timeouts experienced
by the TCP connection.
Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want to leverage keyring to store sensitive keys, and then use those
keys for symmetric encryption via the crypto API. Among the key types we
wish to support are: user, logon, encrypted, and trusted.
User key types are already able to have their data copied to user space,
but logon does not support this. Further, trusted and encrypted keys will
return their encrypted data back to user space on read, which does not
make them ideal for symmetric encryption.
To support symmetric encryption for these key types, add a new
ALG_SET_KEY_BY_KEY_SERIAL setsockopt() option to the crypto API. This
allows users to pass a key_serial_t to the crypto API to perform
symmetric encryption. The behavior is the same as ALG_SET_KEY, but
the crypto key data is copied in kernel space from a keyring key,
which allows for the support of logon, encrypted, and trusted key types.
Keyring keys must have the KEY_(POS|USR|GRP|OTH)_SEARCH permission set
to leverage this feature. This follows the asymmetric_key type where key
lookup calls eventually lead to keyring_search_rcu() without the
KEYRING_SEARCH_NO_CHECK_PERM flag set.
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Move struct nft_payload_set definition to .c file where it is
only used.
2) Shrink transport and inner header offset fields in the nft_pktinfo
structure to 16-bits, from Florian Westphal.
3) Get rid of nft_objref Kbuild toggle, make it built-in into
nf_tables. This expression is used to instantiate conntrack helpers
in nftables. After removing the conntrack helper auto-assignment
toggle it this feature became more important so move it to the nf_tables
core module. Also from Florian.
4) Extend the existing function to calculate payload inner header offset
to deal with the GRE and IPIP transport protocols.
6) Add inner expression support for nf_tables. This new expression
provides a packet parser for tunneled packets which uses a userspace
description of the expected inner headers. The inner expression
invokes the payload expression (via direct call) to match on the
inner header protocol fields using the inner link, network and
transport header offsets.
An example of the bytecode generated from userspace to match on
IP source encapsulated in a VxLAN packet:
# nft --debug=netlink add rule netdev x y udp dport 4789 vxlan ip saddr 1.2.3.4
netdev x y
[ meta load l4proto => reg 1 ]
[ cmp eq reg 1 0x00000011 ]
[ payload load 2b @ transport header + 2 => reg 1 ]
[ cmp eq reg 1 0x0000b512 ]
[ inner type vxlan hdrsize 8 flags f [ meta load protocol => reg 1 ] ]
[ cmp eq reg 1 0x00000008 ]
[ inner type vxlan hdrsize 8 flags f [ payload load 4b @ network header + 12 => reg 1 ] ]
[ cmp eq reg 1 0x04030201 ]
7) Store inner link, network and transport header offsets in percpu
area to parse inner packet header once only. Matching on a different
tunnel type invalidates existing offsets in the percpu area and it
invokes the inner tunnel parser again.
8) Add support for inner meta matching. This support for
NFTA_META_PROTOCOL, which specifies the inner ethertype, and
NFT_META_L4PROTO, which specifies the inner transport protocol.
9) Extend nft_inner to parse GENEVE optional fields to calculate the
link layer offset.
10) Update inner expression so tunnel offset points to GRE header
to normalize tunnel header handling. This also allows to perform
different interpretations of the GRE header from userspace.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_inner: set tunnel offset to GRE header offset
netfilter: nft_inner: add geneve support
netfilter: nft_meta: add inner match support
netfilter: nft_inner: add percpu inner context
netfilter: nft_inner: support for inner tunnel header matching
netfilter: nft_payload: access ipip payload for inner offset
netfilter: nft_payload: access GRE payload via inner offset
netfilter: nft_objref: make it builtin
netfilter: nf_tables: reduce nft_pktinfo by 8 bytes
netfilter: nft_payload: move struct nft_payload_set definition where it belongs
====================
Link: https://lore.kernel.org/r/20221026132227.3287-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OA reports in the OA buffer contain an OA timestamp field that helps
user calculate delta between 2 OA reports. The calculation relies on the
CS timestamp frequency to convert the timestamp value to nanoseconds.
The CS timestamp frequency is a function of the CTC_SHIFT value in
RPM_CONFIG0.
In DG2, OA unit assumes that the CTC_SHIFT is 3, instead of using the
actual value from RPM_CONFIG0. At the user level, this results in an
error in calculating delta between 2 OA reports since the OA timestamp
is not shifted in the same manner as CS timestamp. Also the periodicity
of the reports is different from what the user configured because of
mismatch in the CS and OA frequencies.
The issue also affects MI_REPORT_PERF_COUNT command.
To resolve this, return actual OA timestamp frequency to the user in
i915_getparam_ioctl, so that user can calculate the right OA exponent as
well as interpret the reports correctly.
MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18893
v2:
- Use REG_FIELD_GET (Ashutosh)
- Update commit msg
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-13-umesh.nerlige.ramappa@intel.com
|
|
Add new OA formats for DG2.
MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18893
v2:
- Update commit title (Ashutosh)
- Coding style fixes (Lionel)
- 64 bit OA formats need UMD changes in GPUvis, drop for now and send in a
separate series with UMD changes
v3:
- Update commit message to drop 64 bit related description
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #1
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-3-umesh.nerlige.ramappa@intel.com
|
|
Add macro defining Responder capable bit in Precision Time Measurement
capability register.
Link: https://lore.kernel.org/r/20220919143340.4527-2-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
|
|
PERF_MEM_LVLNUM_EXTN_MEM was introduced to cover CXL devices but it's
bit ambiguous name and also not generic enough to cover cxl.cache and
cxl.io devices. Rename it to PERF_MEM_LVLNUM_CXL to be more specific.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/f6268268-b4e9-9ed6-0453-65792644d953@amd.com
|
|
The process for merging uAPI is to have UMD side ready and reviewed and
merged before merging. Revert for now until that is ready.
This reverts commit d54576a074a29d4901d0a693cd84e1a89057f694.
Reported-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024101946.28974-1-matthew.auld@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.1-2022-10-26-1:
amdgpu:
- Stable pstate fix
- SMU 13.x updates
- SR-IOV fixes
- PCI AER fix
- GC 11.x fixes
- Display fixes
- Expose IMU firmware version for debugging
- Plane modifier fix
- S0i3 fix
amdkfd:
- Fix possible memory leak
- Fix GC 10.x cache info reporting
UAPI:
- Expose IMU firmware version via existing INFO firmware query
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027024101.6881-1-alexander.deucher@amd.com
|
|
Similar to sk/inode/task storage, implement similar cgroup local storage.
There already exists a local storage implementation for cgroup-attached
bpf programs. See map type BPF_MAP_TYPE_CGROUP_STORAGE and helper
bpf_get_local_storage(). But there are use cases such that non-cgroup
attached bpf progs wants to access cgroup local storage data. For example,
tc egress prog has access to sk and cgroup. It is possible to use
sk local storage to emulate cgroup local storage by storing data in socket.
But this is a waste as it could be lots of sockets belonging to a particular
cgroup. Alternatively, a separate map can be created with cgroup id as the key.
But this will introduce additional overhead to manipulate the new map.
A cgroup local storage, similar to existing sk/inode/task storage,
should help for this use case.
The life-cycle of storage is managed with the life-cycle of the
cgroup struct. i.e. the storage is destroyed along with the owning cgroup
with a call to bpf_cgrp_storage_free() when cgroup itself
is deleted.
The userspace map operations can be done by using a cgroup fd as a key
passed to the lookup, update and delete operations.
Typically, the following code is used to get the current cgroup:
struct task_struct *task = bpf_get_current_task_btf();
... task->cgroups->dfl_cgrp ...
and in structure task_struct definition:
struct task_struct {
....
struct css_set __rcu *cgroups;
....
}
With sleepable program, accessing task->cgroups is not protected by rcu_read_lock.
So the current implementation only supports non-sleepable program and supporting
sleepable program will be the next step together with adding rcu_read_lock
protection for rcu tagged structures.
Since map name BPF_MAP_TYPE_CGROUP_STORAGE has been used for old cgroup local
storage support, the new map name BPF_MAP_TYPE_CGRP_STORAGE is used
for cgroup storage available to non-cgroup-attached bpf programs. The old
cgroup storage supports bpf_get_local_storage() helper to get the cgroup data.
The new cgroup storage helper bpf_cgrp_storage_get() can provide similar
functionality. While old cgroup storage pre-allocates storage memory, the new
mechanism can also pre-allocate with a user space bpf_map_update_elem() call
to avoid potential run-time memory allocation failure.
Therefore, the new cgroup storage can provide all functionality w.r.t.
the old one. So in uapi bpf.h, the old BPF_MAP_TYPE_CGROUP_STORAGE is alias to
BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED to indicate the old cgroup storage can
be deprecated since the new one can provide the same functionality.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042850.673791-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix the annoying whitespace issues that have been following these files
around for years.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20221018071350.never.230-kees@kernel.org
|
|
When searching for a struct definition I often enough end up simply doing
git grep 'struct foobar {'
Sadly some of the ELF structs did not follow the usual coding style so they
were invisible.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/11563980.Ss37MnutNL@mobilepool36.emlix.com
|
|
If it is a progressive (non-interlaced) format, then ignore the
interlaced timing values.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Geneve tunnel header may contain options, parse geneve header and update
offset to point to the link layer header according to the opt_len field.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This new expression allows you to match on the inner headers that are
encapsulated by any of the existing tunneling protocols.
This expression parses the inner packet to set the link, network and
transport offsets, so the existing expressions (with a few updates) can
be reused to match on the inner headers.
The inner expression supports for different tunnel combinations such as:
- ethernet frame over IPv4/IPv6 packet, eg. VxLAN.
- IPv4/IPv6 packet over IPv4/IPv6 packet, eg. IPIP.
- IPv4/IPv6 packet over IPv4/IPv6 + transport header, eg. GRE.
- transport header (ESP or SCTP) over transport header (usually UDP)
The following fields are used to describe the tunnel protocol:
- flags, which describe how to parse the inner headers:
NFT_PAYLOAD_CTX_INNER_TUN, the tunnel provides its own header.
NFT_PAYLOAD_CTX_INNER_ETHER, the ethernet frame is available as inner header.
NFT_PAYLOAD_CTX_INNER_NH, the network header is available as inner header.
NFT_PAYLOAD_CTX_INNER_TH, the transport header is available as inner header.
For example, VxLAN sets on all of these flags. While GRE only sets on
NFT_PAYLOAD_CTX_INNER_NH and NFT_PAYLOAD_CTX_INNER_TH. Then, ESP over
UDP only sets on NFT_PAYLOAD_CTX_INNER_TH.
The tunnel description is composed of the following attributes:
- header size: in case the tunnel comes with its own header, eg. VxLAN.
- type: this provides a hint to userspace on how to delinearize the rule.
This is useful for VxLAN and Geneve since they run over UDP, since
transport does not provide a hint. This is also useful in case hardware
offload is ever supported. The type is not currently interpreted by the
kernel.
- expression: currently only payload supported. Follow up patch adds
also inner meta support which is required by autogenerated
dependencies. The exthdr expression should be supported too
at some point. There is a new inner_ops operation that needs to be
set on to allow to use an existing expression from the inner expression.
This patch adds a new NFT_PAYLOAD_TUN_HEADER base which allows to match
on the tunnel header fields, eg. vxlan vni.
The payload expression is embedded into nft_inner private area and this
private data area is passed to the payload inner eval function via
direct call.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the
sensor, and its documentation.
Menu items are not standardized as they differ for each sensors.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
This extends the greyscale media bus family originally from
MEDIA_BUS_FMT_Y8_1X8 up to MEDIA_BUS_FMT_Y14_1X14 by adding
MEDIA_BUS_FMT_Y16_1X16, and behaves the same way with 16 bits.
Add its documentation in subdev-formats.rst
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
- Documentation for page-flip flags
Cross-subsystem Changes:
- dma-buf: Add unlocked variant of vmapping and attachment-mapping
functions
Core Changes:
- atomic-helpers: CRTC primary plane test fixes
- connector: TV API consistency improvements, cmdline parsing
improvements
- crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper
- edid: Fixes for HFVSDB parsing,
- fourcc: Addition of the Vivante tiled modifier
- makefile: Sort and reorganize the objects files
- mode_config: Remove fb_base from drm_mode_config_funcs
- sched: Add a module parameter to change the scheduling policy,
refcounting fix for fences
- tests: Sort the Kunit tests in the Makefile, improvements to the
DP-MST tests
- ttm: Remove unnecessary drm_mm_clean() call
Driver Changes:
- New driver: ofdrm
- Move all drivers to a common dma-buf locking convention
- bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
- ast: Atomic Gamma LUT Support, Convert to SHMEM, various
improvements
- lcdif: Support for YUV planes
- mgag200: Fix PLL Setup on some revisions
- udl: Modesetting improvements, hot-unplug support
- vc4: Fix support for PAL-M
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
|
|
include/linux/net.h
a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag")
e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IMU is a new firmware for GFX11.
There are four means by which firmware version can be queried
from the driver: device attributes, vf2pf, debugfs,
and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl.
Add IMU as an option for those four methods.
V2: Added debugfs
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
IMU is a new firmware for GFX11.
There are four means by which firmware version can be queried
from the driver: device attributes, vf2pf, debugfs,
and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl.
Add IMU as an option for those four methods.
V2: Added debugfs
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Added p_s32 and p_s64 pointers to the union in struct v4l2_ext_control to
simplify INTEGER and INTEGER64 control array support.
Internally the control framework handles such arrays just fine, but
userspace is missing corresponding pointers to access array elements of
these types.
The internal union v4l2_ctrl_ptr which the control framework uses already
has these types, they just were never added to the public API.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support for 800Gbps speed, link modes of 100Gbps per lane.
As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df
copper and optical PMDs baselines using 100G/lane will be supported.
Add the relevant PMDs which are mentioned in slide 5 in IEEE
documentation [1] and were approved on 10-2022 [2]:
BP - KR8
Cu Cable - CR8
MMF 50m - VR8
MMF 100m - SR8
SMF 500m - DR8
SMF 2km - DR8-2
[1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf
[2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
|
|
For the userspace it is needed to distinguish between requests for the
control or streaming interface. The userspace would have to parse the
configfs to know which interface index it has to compare the ctrl
requests against. Since the interface numbers are not fixed, e.g. for
composite gadgets, the interface offset depends on the setup.
The kernel has this information when handing over the ctrl request to
the userspace. This patch removes the offset from the interface numbers
and expose the default interface defines in the uapi g_uvc.h.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20221011075348.1786897-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__le32 and __le64 types aren't portable and are not available on
FreeBSD (which uses the same uAPI).
Instead of attempting to always output little endian, just use native
endianness in the dumps. Tools can detect the endianness in use by
looking at the 'magic' field, but equally we don't expect big-endian to
be used with Mali (there are no known implementations out there).
Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7252
Fixes: 730c2bf4ad39 ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-3-steven.price@arm.com
|
|
The two structs internal to struct panfrost_dump_object_header were
named, but sadly that is incompatible with C++, causing an error: "an
anonymous union may only have public non-static data members".
However nothing refers to struct pan_reg_hdr and struct pan_bomap_hdr
and there's no need to export these definitions, so lets drop them. This
fixes the C++ build error with the minimum change in userspace API.
Reported-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 730c2bf4ad39 ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-2-steven.price@arm.com
|
|
Addressing
When the idxd_user_drv driver is bound to a Work Queue (WQ) device
without IOMMU or with IOMMU Passthrough without Shared Virtual
Addressing (SVA), the application gains direct access to physical
memory via the device by programming physical address to a submitted
descriptor. This allows direct userspace read and write access to
arbitrary physical memory. This is inconsistent with the security
goals of a good kernel API.
Unlike vfio_pci driver, the IDXD char device driver does not provide any
ways to pin user pages and translate the address from user VA to IOVA or
PA without IOMMU SVA. Therefore the application has no way to instruct the
device to perform DMA function. This makes the char device not usable for
normal application usage.
Since user type WQ without SVA cannot be used for normal application usage
and presents the security issue, bind idxd_user_drv driver and enable user
type WQ only when SVA is enabled (i.e. user PASID is enabled).
Fixes: 448c3de8ac83 ("dmaengine: idxd: create user driver for wq 'device'")
Cc: stable@vger.kernel.org
Suggested-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221014222541.3912195-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Introduce the LANDLOCK_ACCESS_FS_TRUNCATE flag for file truncation.
This flag hooks into the path_truncate, file_truncate and
file_alloc_security LSM hooks and covers file truncation using
truncate(2), ftruncate(2), open(2) with O_TRUNC, as well as creat().
This change also increments the Landlock ABI version, updates
corresponding selftests, and updates code documentation to document
the flag.
In security/security.c, allocate security blobs at pointer-aligned
offsets. This fixes the problem where one LSM's security blob can
shift another LSM's security blob to an unaligned address (reported
by Nathan Chancellor).
The following operations are restricted:
open(2): requires the LANDLOCK_ACCESS_FS_TRUNCATE right if a file gets
implicitly truncated as part of the open() (e.g. using O_TRUNC).
Notable special cases:
* open(..., O_RDONLY|O_TRUNC) can truncate files as well in Linux
* open() with O_TRUNC does *not* need the TRUNCATE right when it
creates a new file.
truncate(2) (on a path): requires the LANDLOCK_ACCESS_FS_TRUNCATE
right.
ftruncate(2) (on a file): requires that the file had the TRUNCATE
right when it was previously opened. File descriptors acquired by
other means than open(2) (e.g. memfd_create(2)) continue to support
truncation with ftruncate(2).
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Link: https://lore.kernel.org/r/20221018182216.301684-5-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-18
We've added 33 non-merge commits during the last 14 day(s) which contain
a total of 31 files changed, 874 insertions(+), 538 deletions(-).
The main changes are:
1) Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs,
from Hou Tao & Paul E. McKenney.
2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values. In the wild we have seen OS vendors doing buggy backports
where helper call numbers mismatched. This is an attempt to make
backports more foolproof, from Andrii Nakryiko.
3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions,
from Roberto Sassu.
4) Fix libbpf's BTF dumper for structs with padding-only fields,
from Eduard Zingerman.
5) Fix various libbpf bugs which have been found from fuzzing with
malformed BPF object files, from Shung-Hsi Yu.
6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT,
from Jie Meng.
7) Fix various ASAN bugs in both libbpf and selftests when running
the BPF selftest suite on arm64, from Xu Kuohai.
8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest
and use in-skeleton link pointer to remove an explicit bpf_link__destroy(),
from Jiri Olsa.
9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying
on symlinked iptables which got upgraded to iptables-nft,
from Martin KaFai Lau.
10) Minor BPF selftest improvements all over the place, from various others.
* tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits)
bpf/docs: Update README for most recent vmtest.sh
bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
bpf: Use rcu_trace_implies_rcu_gp() in local storage map
bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
rcu-tasks: Provide rcu_trace_implies_rcu_gp()
selftests/bpf: Use sys_pidfd_open() helper when possible
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
libbpf: Deal with section with no data gracefully
libbpf: Use elf_getshdrnum() instead of e_shnum
selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c
selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow
selftest/bpf: Fix memory leak in kprobe_multi_test
selftests/bpf: Fix memory leak caused by not destroying skeleton
libbpf: Fix memory leak in parse_usdt_arg()
libbpf: Fix use-after-free in btf_dump_name_dups
selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test
selftests/bpf: Alphabetize DENYLISTs
selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id()
libbpf: Introduce bpf_link_get_fd_by_id_opts()
libbpf: Introduce bpf_btf_get_fd_by_id_opts()
...
====================
Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's kick-off this release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The SMBus system interface (SSIF) IPMI BMC driver can be used to perform
in-band IPMI communication with their host in management (BMC) side.
Thanks Dan for the copy_from_user() fix in the link below.
Link: https://lore.kernel.org/linux-arm-kernel/20220310114119.13736-4-quan@os.amperecomputing.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-Id: <20221004093106.1653317-2-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
|
|
On some platforms we potentially have different alignment restrictions
depending on the memory type. We also now have different alignment
restrictions for the same region across different kernel versions.
Extend the region query to return the minimum required GTT alignment.
Testcase: igt@gem_create@create-ext-placement-alignment
Testcase: igt@i915_query@query-regions-sanity-check
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-2-matthew.auld@intel.com
|
|
It turns out that on production DG2/ATS HW we should have support for
PS64. This feature allows to provide a 64K TLB hint at the PTE level,
which is a lot more flexible than the current method of enabling 64K GTT
pages for the entire page-table, since that leads to all kinds of
annoying restrictions, as documented in:
commit caa574ffc4aaf4f29b890223878c63e2e7772f62
Author: Matthew Auld <matthew.auld@intel.com>
Date: Sat Feb 19 00:17:49 2022 +0530
drm/i915/uapi: document behaviour for DG2 64K support
On discrete platforms like DG2, we need to support a minimum page size
of 64K when dealing with device local-memory. This is quite tricky for
various reasons, so try to document the new implicit uapi for this.
With PS64, we can now drop the 2M GTT alignment restriction, and instead
only require 64K or larger when dealing with lmem. We still use the
compact-pt layout when possible, but only when we are certain that this
doesn't interfere with userspace.
Note that this is a change in uAPI behaviour, but hopefully shouldn't be
a concern (IGT is at least able to autodetect the alignment), since we
are only making the GTT alignment constraint less restrictive.
Based on a patch from CQ Tang.
v2: update the comment wrt scratch page
v3: (Nirmoy)
- Fix the selftest to actually use the random size, plus some comment
improvements, also drop the rem stuff.
Reported-by: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-1-matthew.auld@intel.com
|
|
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
|
|
Pull more kvm updates from Paolo Bonzini:
"The main batch of ARM + RISC-V changes, and a few fixes and cleanups
for x86 (PMU virtualization and selftests).
ARM:
- Fixes for single-stepping in the presence of an async exception as
well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only systems
- Fixes for the dirty-ring API, allowing it to work on architectures
with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
RISC-V:
- Improved instruction encoding infrastructure for instructions not
yet supported by binutils
- Svinval support for both KVM Host and KVM Guest
- Zihintpause support for KVM Guest
- Zicbom support for KVM Guest
- Record number of signal exits as a VCPU stat
- Use generic guest entry infrastructure
x86:
- Misc PMU fixes and cleanups.
- selftests: fixes for Hyper-V hypercall
- selftests: fix nx_huge_pages_test on TDP-disabled hosts
- selftests: cleanups for fix_hypercall_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (57 commits)
riscv: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
RISC-V: KVM: Use generic guest entry infrastructure
RISC-V: KVM: Record number of signal exits as a vCPU stat
RISC-V: KVM: add __init annotation to riscv_kvm_init()
RISC-V: KVM: Expose Zicbom to the guest
RISC-V: KVM: Provide UAPI for Zicbom block size
RISC-V: KVM: Make ISA ext mappings explicit
RISC-V: KVM: Allow Guest use Zihintpause extension
RISC-V: KVM: Allow Guest use Svinval extension
RISC-V: KVM: Use Svinval for local TLB maintenance when available
RISC-V: Probe Svinval extension form ISA string
RISC-V: KVM: Change the SBI specification version to v1.0
riscv: KVM: Apply insn-def to hlv encodings
riscv: KVM: Apply insn-def to hfence encodings
riscv: Introduce support for defining instructions
riscv: Add X register names to gpr-nums
KVM: arm64: Advertise new kvmarm mailing list
kvm: vmx: keep constant definition format consistent
kvm: mmu: fix typos in struct kvm_arch
KVM: selftests: Fix nx_huge_pages_test on TDP-disabled hosts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper
support of optional gpiochip functionality (and removal of
gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements
* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
Input: i8042 - fix refount leak on sparc
Input: i8042 - add LoongArch support in i8042-acpipnpio.h
Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
Input: pinephone-keyboard - support the proxied I2C bus
Input: pinephone-keyboard - add PinePhone keyboard driver
dt-bindings: input: Add the PinePhone keyboard binding
dt-bindings: input: Convert hid-over-i2c to DT schema
input: drop empty comment blocks
Input: xpad - add X-Box Adaptive Profile button
Input: add ABS_PROFILE to uapi and documentation
Input: xpad - add X-Box Adaptive XBox button
Input: xpad - add X-Box Adaptive support
Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"
Input: ibm-panel - add missing MODULE_DEVICE_TABLE
Input: icn8505 - utilize acpi_get_subsystem_id()
Input: xpad - decipher xpadone packages with GIP defines
Input: xpad - refactor using BIT() macro
Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
Input: twl4030-pwrbutton - add missing of.h include
Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs tmpfile updates from Al Viro:
"Miklos' ->tmpfile() signature change; pass an unopened struct file to
it, let it open the damn thing. Allows to add tmpfile support to FUSE"
* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: implement ->tmpfile()
vfs: open inside ->tmpfile()
vfs: move open right after ->tmpfile()
vfs: make vfs_tmpfile() static
ovl: use vfs_tmpfile_open() helper
cachefiles: use vfs_tmpfile_open() helper
cachefiles: only pass inode to *mark_inode_inuse() helpers
cachefiles: tmpfile error handling cleanup
hugetlbfs: cleanup mknod and tmpfile
vfs: add vfs_tmpfile_open() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
Pull virtio updates from Michael Tsirkin:
- 9k mtu perf improvements
- vdpa feature provisioning
- virtio blk SECURE ERASE support
- fixes and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: don't try to use intxif pin is zero
vDPA: conditionally read MTU and MAC in dev cfg space
vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill
vDPA: check virtio device features to detect MQ
vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence
vDPA: only report driver features if FEATURES_OK is set
vDPA: allow userspace to query features of a vDPA device
virtio_blk: add SECURE ERASE command support
vp_vdpa: support feature provisioning
vdpa_sim_net: support feature provisioning
vdpa: device feature provisioning
virtio-net: use mtu size as buffer length for big packets
virtio-net: introduce and use helper function for guest gso support checks
virtio: drop vp_legacy_set_queue_size
virtio_ring: make vring_alloc_queue_packed prettier
virtio_ring: split: Operators use unified style
vhost: add __init/__exit annotations to module init/exit funcs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Feed untrusted RNGs into /dev/random
- Allow HWRNG sleeping to be more interruptible
- Create lib/utils module
- Setting private keys no longer required for akcipher
- Remove tcrypt mode=1000
- Reorganised Kconfig entries
Algorithms:
- Load x86/sha512 based on CPU features
- Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
Drivers:
- Add HACE crypto driver aspeed"
* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
crypto: aspeed - Remove redundant dev_err call
crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
crypto: aead - Remove unused inline functions from aead
crypto: bcm - Simplify obtain the name for cipher
crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
hwrng: core - start hwrng kthread also for untrusted sources
crypto: zip - remove the unneeded result variable
crypto: qat - add limit to linked list parsing
crypto: octeontx2 - Remove the unneeded result variable
crypto: ccp - Remove the unneeded result variable
crypto: aspeed - Fix check for platform_get_irq() errors
crypto: virtio - fix memory-leak
crypto: cavium - prevent integer overflow loading firmware
crypto: marvell/octeontx - prevent integer overflows
crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
crypto: hisilicon/qm - fix the qos value initialization
crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
crypto: tcrypt - add async speed test for aria cipher
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
crypto: aria - prepare generic module for optimized implementations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information, if
available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs
and thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key
operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements"
* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
perf: Fix pmu_filter_match()
perf: Fix lockdep_assert_event_ctx()
perf/x86/amd/lbr: Adjust LBR regardless of filtering
perf/x86/utils: Fix uninitialized var in get_branch_type()
perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
perf/x86/amd: Support PERF_SAMPLE_ADDR
perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
perf/x86/uncore: Add new Raptor Lake S support
perf/x86/cstate: Add new Raptor Lake S support
perf/x86/msr: Add new Raptor Lake S support
perf/x86: Add new Raptor Lake S support
bpf: Check flags for branch stack in bpf_read_branch_records helper
perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
perf: Use sample_flags for raw_data
perf: Use sample_flags for addr
...
|
|
Pull in wireless/main content since some new code would
otherwise conflict with it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
|
