| Age | Commit message (Collapse) | Author | Lines |
|---|
|
The definition of struct delegation uses stdint.h integer types. Add the
necessary headers to ensure that always works.
Fixes: 1602bad16d7d ("vfs: expose delegation support to userland")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This 0x88C3 is registered to Infineon Technologies Corporate Research ST
and are used by MaxLinear.
Infineon made a spin off called Lantiq.
Lantiq was acquired by Intel
MaxLinear acquired Intels Connected Home division.
The product FAQ from MaxLinear describes it's history from the F24S.
The driver for the gsw1xx is based on Lantiq showing it's similarities.
Ref https://standards-oui.ieee.org/ethertype/eth.txt
Signed-off-by: Peter Enderborg <Peter.Enderborg@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In include/uapi/linux/netfilter/nf_tables.h,
correct the kernel-doc comments for mistyped enum names and enum values to
avoid these kernel-doc warnings and improve the documentation:
nf_tables.h:896: warning: Enum value 'NFT_EXTHDR_OP_TCPOPT' not described
in enum 'nft_exthdr_op'
nf_tables.h:896: warning: Excess enum value 'NFT_EXTHDR_OP_TCP' description
in 'nft_exthdr_op'
nf_tables.h:1210: warning: expecting prototype for enum
nft_flow_attributes. Prototype was for enum nft_offload_attributes instead
nf_tables.h:1428: warning: expecting prototype for enum nft_reject_code.
Prototype was for enum nft_reject_inet_code instead
(add beginning '@' to each enum value description:)
nf_tables.h:1493: warning: Enum value 'NFTA_TPROXY_FAMILY' not described
in enum 'nft_tproxy_attributes'
nf_tables.h:1493: warning: Enum value 'NFTA_TPROXY_REG_ADDR' not described
in enum 'nft_tproxy_attributes'
nf_tables.h:1493: warning: Enum value 'NFTA_TPROXY_REG_PORT' not described
in enum 'nft_tproxy_attributes'
nf_tables.h:1796: warning: expecting prototype for enum
nft_device_attributes. Prototype was for enum
nft_devices_attributes instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix the kernel-doc format for struct members to be "@member" instead of
"@ member" to avoid kernel-doc warnings.
Warning: ip6t_srh.h:60 struct member 'next_hdr' not described in 'ip6t_srh'
Warning: ip6t_srh.h:60 struct member 'hdr_len' not described in 'ip6t_srh'
Warning: ip6t_srh.h:60 struct member 'segs_left' not described
in 'ip6t_srh'
Warning: ip6t_srh.h:60 struct member 'last_entry' not described
in 'ip6t_srh'
Warning: ip6t_srh.h:60 struct member 'tag' not described in 'ip6t_srh'
Warning: ip6t_srh.h:60 struct member 'mt_flags' not described in 'ip6t_srh'
Warning: ip6t_srh.h:60 struct member 'mt_invflags' not described
in 'ip6t_srh'
Warning: ip6t_srh.h:93 struct member 'next_hdr' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'hdr_len' not described in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'segs_left' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'last_entry' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'tag' not described in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'psid_addr' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'nsid_addr' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'lsid_addr' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'psid_msk' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'nsid_msk' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'lsid_msk' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'mt_flags' not described
in 'ip6t_srh1'
Warning: ip6t_srh.h:93 struct member 'mt_invflags' not described
in 'ip6t_srh1'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Introduce a generic infrastructure for tracking recoverable hardware
errors (HW errors that are visible to the OS but does not cause a panic)
and record them for vmcore consumption. This aids post-mortem crash
analysis tools by preserving a count and timestamp for the last occurrence
of such errors. On the other side, correctable errors, which the OS
typically remains unaware of because the underlying hardware handles them
transparently, are less relevant for crash dump and therefore are NOT
tracked in this infrastructure.
Add centralized logging for sources of recoverable hardware errors based
on the subsystem it has been notified.
hwerror_data is write-only at kernel runtime, and it is meant to be read
from vmcore using tools like crash/drgn. For example, this is how it
looks like when opening the crashdump from drgn.
>>> prog['hwerror_data']
(struct hwerror_info[1]){
{
.count = (int)844,
.timestamp = (time64_t)1752852018,
},
...
This helps fleet operators quickly triage whether a crash may be
influenced by hardware recoverable errors (which executes a uncommon code
path in the kernel), especially when recoverable errors occurred shortly
before a panic, such as the bug fixed by commit ee62ce7a1d90 ("page_pool:
Track DMA-mapped pages and unmap them when destroying the pool")
This is not intended to replace full hardware diagnostics but provides a
fast way to correlate hardware events with kernel panics quickly.
Rare machine check exceptions—like those indicated by mce_flags.p5 or
mce_flags.winchip—are not accounted for in this method, as they fall
outside the intended usage scope for this feature's user base.
[leitao@debian.org: add hw-recoverable-errors to toctree]
Link: https://lkml.kernel.org/r/20251127-vmcoreinfo_fix-v1-1-26f5b1c43da9@debian.org
Link: https://lkml.kernel.org/r/20251010-vmcore_hw_error-v5-1-636ede3efe44@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Tony Luck <tony.luck@intel.com>
Suggested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com> [APEI]
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Konrad Rzessutek Wilk <konrad.wilk@oracle.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introducing the userspace interface and internal logic required to manage
the lifecycle of file descriptors within a session. Previously, a session
was merely a container; this change makes it a functional management unit.
The following capabilities are added:
A new set of ioctl commands are added, which operate on the file
descriptor returned by CREATE_SESSION. This allows userspace to:
- LIVEUPDATE_SESSION_PRESERVE_FD: Add a file descriptor to a session
to be preserved across the live update.
- LIVEUPDATE_SESSION_RETRIEVE_FD: Retrieve a preserved file in the
new kernel using its unique token.
- LIVEUPDATE_SESSION_FINISH: finish session
The session's .release handler is enhanced to be state-aware. When a
session's file descriptor is closed, it correctly unpreserves the session
based on its current state before freeing all associated file resources.
Link: https://lkml.kernel.org/r/20251125165850.3389713-8-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: David Matlack <dmatlack@google.com>
Cc: Aleksander Lobakin <aleksander.lobakin@intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: anish kumar <yesanishhere@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guixin Liu <kanie@linux.alibaba.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Myugnjoo Ham <myungjoo.ham@samsung.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: William Tu <witu@nvidia.com>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce the user-space interface for the Live Update Orchestrator via
ioctl commands, enabling external control over the live update process and
management of preserved resources.
The idea is that there is going to be a single userspace agent driving the
live update, therefore, only a single process can ever hold this device
opened at a time.
The following ioctl commands are introduced:
LIVEUPDATE_IOCTL_CREATE_SESSION
Provides a way for userspace to create a named session for grouping file
descriptors that need to be preserved. It returns a new file descriptor
representing the session.
LIVEUPDATE_IOCTL_RETRIEVE_SESSION
Allows the userspace agent in the new kernel to reclaim a preserved
session by its name, receiving a new file descriptor to manage the
restored resources.
Link: https://lkml.kernel.org/r/20251125165850.3389713-6-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Tested-by: David Matlack <dmatlack@google.com>
Cc: Aleksander Lobakin <aleksander.lobakin@intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: anish kumar <yesanishhere@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guixin Liu <kanie@linux.alibaba.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Myugnjoo Ham <myungjoo.ham@samsung.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: William Tu <witu@nvidia.com>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce concept of "Live Update Sessions" within the LUO framework. LUO
sessions provide a mechanism to group and manage `struct file *` instances
(representing file descriptors) that need to be preserved across a
kexec-based live update.
Each session is identified by a unique name and acts as a container for
file objects whose state is critical to a userspace workload, such as a
virtual machine or a high-performance database, aiming to maintain their
functionality across a kernel transition.
This groundwork establishes the framework for preserving file-backed state
across kernel updates, with the actual file data preservation mechanisms
to be implemented in subsequent patches.
[dan.carpenter@linaro.org: fix use after free in luo_session_deserialize()]
Link: https://lkml.kernel.org/r/c5dd637d7eed3a3be48c5e9fedb881596a3b1f5a.1764163896.git.dan.carpenter@linaro.org
Link: https://lkml.kernel.org/r/20251125165850.3389713-5-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Tested-by: David Matlack <dmatlack@google.com>
Cc: Aleksander Lobakin <aleksander.lobakin@intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: anish kumar <yesanishhere@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guixin Liu <kanie@linux.alibaba.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Myugnjoo Ham <myungjoo.ham@samsung.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: William Tu <witu@nvidia.com>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Live Update Orchestrator", v8.
This series introduces the Live Update Orchestrator, a kernel subsystem
designed to facilitate live kernel updates using a kexec-based reboot.
This capability is critical for cloud environments, allowing hypervisors
to be updated with minimal downtime for running virtual machines. LUO
achieves this by preserving the state of selected resources, such as
memory, devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving memfd file
descriptors, which allows critical in-memory data, such as guest RAM or
any other large memory region, to be maintained in RAM across the kexec
reboot.
The other series that use LUO, are VFIO [1], IOMMU [2], and PCI [3]
preservations.
Github repo of this series [4].
The core of LUO is a framework for managing the lifecycle of preserved
resources through a userspace-driven interface. Key features include:
- Session Management
Userspace agent (i.e. luod [5]) creates named sessions, each
represented by a file descriptor (via centralized agent that controls
/dev/liveupdate). The lifecycle of all preserved resources within a
session is tied to this FD, ensuring automatic kernel cleanup if the
controlling userspace agent crashes or exits unexpectedly.
- File Preservation
A handler-based framework allows specific file types (demonstrated
here with memfd) to be preserved. Handlers manage the serialization,
restoration, and lifecycle of their specific file types.
- File-Lifecycle-Bound State
A new mechanism for managing shared global state whose lifecycle is
tied to the preservation of one or more files. This is crucial for
subsystems like IOMMU or HugeTLB, where multiple file descriptors may
depend on a single, shared underlying resource that must be preserved
only once.
- KHO Integration
LUO drives the Kexec Handover framework programmatically to pass its
serialized metadata to the next kernel. The LUO state is finalized and
added to the kexec image just before the reboot is triggered. In the
future this step will also be removed once stateless KHO is
merged [6].
- Userspace Interface
Control is provided via ioctl commands on /dev/liveupdate for creating
and retrieving sessions, as well as on session file descriptors for
managing individual files.
- Testing
The series includes a set of selftests, including userspace API
validation, kexec-based lifecycle tests for various session and file
scenarios, and a new in-kernel test module to validate the FLB logic.
Introduce LUO, a mechanism intended to facilitate kernel updates while
keeping designated devices operational across the transition (e.g., via
kexec). The primary use case is updating hypervisors with minimal
disruption to running virtual machines. For userspace side of hypervisor
update we have copyless migration. LUO is for updating the kernel.
This initial patch lays the groundwork for the LUO subsystem.
Further functionality, including the implementation of state transition
logic, integration with KHO, and hooks for subsystems and file
descriptors, will be added in subsequent patches.
Create a character device at /dev/liveupdate.
A new uAPI header, <uapi/linux/liveupdate.h>, will define the necessary
structures. The magic number for IOCTL is registered in
Documentation/userspace-api/ioctl/ioctl-number.rst.
Link: https://lkml.kernel.org/r/20251125165850.3389713-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20251125165850.3389713-2-pasha.tatashin@soleen.com
Link: https://lore.kernel.org/all/20251018000713.677779-1-vipinsh@google.com/ [1]
Link: https://lore.kernel.org/linux-iommu/20250928190624.3735830-1-skhawaja@google.com [2]
Link: https://lore.kernel.org/linux-pci/20250916-luo-pci-v2-0-c494053c3c08@kernel.org [3]
Link: https://github.com/googleprodkernel/linux-liveupdate/tree/luo/v8 [4]
Link: https://tinyurl.com/luoddesign [5]
Link: https://lore.kernel.org/all/20251020100306.2709352-1-jasonmiu@google.com [6]
Link: https://lore.kernel.org/all/20251115233409.768044-1-pasha.tatashin@soleen.com [7]
Link: https://github.com/soleen/linux/blob/luo/v8b03/diff.v7.v8 [8]
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: David Matlack <dmatlack@google.com>
Cc: Aleksander Lobakin <aleksander.lobakin@intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: anish kumar <yesanishhere@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guixin Liu <kanie@linux.alibaba.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Myugnjoo Ham <myungjoo.ham@samsung.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: William Tu <witu@nvidia.com>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-11-26
this is a pull request of 27 patches for net-next/main.
The first 17 patches are by Vincent Mailhol and Oliver Hartkopp and
add CAN XL support to the CAN netlink interface.
Geert Uytterhoeven and Biju Das provide 7 patches for the rcar_canfd
driver to add suspend/resume support.
The next 2 patches are by Markus Schneider-Pargmann and add them as
the m_can maintainer.
Conor Dooley's patch updates the mpfs-can DT bindungs.
linux-can-next-for-6.19-20251126
* tag 'linux-can-next-for-6.19-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
dt-bindings: can: mpfs: document resets
MAINTAINERS: Simplify m_can section
MAINTAINERS: Add myself as m_can maintainer
can: rcar_canfd: Add suspend/resume support
can: rcar_canfd: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
can: rcar_canfd: Invert CAN clock and close_candev() order
can: rcar_canfd: Extract rcar_canfd_global_{,de}init()
can: rcar_canfd: Use devm_clk_get_optional() for RAM clk
can: rcar_canfd: Invert global vs. channel teardown
can: rcar_canfd: Invert reset assert order
can: dev: print bitrate error with two decimal digits
can: raw: instantly reject unsupported CAN frames
can: add dummy_can driver
can: calc_bittiming: add can_calc_sample_point_pwm()
can: calc_bittiming: add can_calc_sample_point_nrz()
can: calc_bittiming: replace misleading "nominal" by "reference"
can: netlink: add PWM netlink interface
can: calc_bittiming: add PWM calculation
can: bittiming: add PWM validation
can: bittiming: add PWM parameters
...
====================
Link: https://patch.msgid.link/20251126120106.154635-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The XPCS driver was mangling the PMA identifier as the original code
appears to have been focused on just capturing the OUI. Rather than store a
mangled ID it is better to work with the actual PMA ID and instead just
mask out the values that don't apply rather than shifting them and
reordering them as you still don't get the original OUI for the NIC without
having to bitswap the values as per the definition of the layout in IEEE
802.3-2022 22.2.4.3.1.
By laying it out as it was in the hardware it is also less likely for us to
have an unintentional collision as the enum values will occupy the revision
number area while the OUI occupies the upper 22 bits.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/176374320920.959489.17267159479370601070.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With this change we are adding support for 25G, 50G, and 100G interface
types to the XPCS driver. This had supposedly been enabled with the
addition of XLGMII but I don't see any capability for configuration there
so I suspect it may need to be refactored in the future.
With this change we can enable the XPCS driver with the selected interface
and it should be able to detect link, speed, and report the link status to
the phylink interface.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/176374320248.959489.11649590675011158859.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The 2.5G and 5G values are not consistent between the PCS CTRL1 and PMA
CTRL1 values. In order to avoid confusion between the two I am updating the
values to include "PMA" in the name similar to values used in similar
places.
To avoid breaking UAPI I have retained the original macros and just defined
them as the new PMA based defines.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/176374319569.959489.6610469879021800710.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
|
|
It is to be used to enable HDR by allowing userpace to create and pass
3D LUTs to kernel and hardware.
new drm_colorop_type: DRM_COLOROP_3D_LUT.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-46-alex.hung@amd.com
|
|
We want to make sure userspace is aware of the 1D LUT
interpolation. While linear interpolation is common it
might not be supported on all HW. Give driver implementers
a way to specify their interpolation.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-44-alex.hung@amd.com
|
|
This introduces a new drm_colorop_type: DRM_COLOROP_MULTIPLIER.
It's a simple multiplier to all pixel values. The value is
specified via a S31.32 fixed point provided via the
"MULTIPLIER" property.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-41-alex.hung@amd.com
|
|
We've previously introduced DRM_COLOROP_1D_CURVE for
pre-defined 1D curves. But we also have HW that supports
custom curves and userspace needs the ability to pass
custom curves, aka LUTs.
This patch introduces a new colorop type, called
DRM_COLOROP_1D_LUT that provides a SIZE property which
is used by a driver to advertise the supported SIZE
of the LUT, as well as a DATA property which userspace
uses to set the LUT.
DATA and size function in the same way as current drm_crtc
GAMMA and DEGAMMA LUTs.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-38-alex.hung@amd.com
|
|
Existing LUT precision structure drm_color_lut has only 16 bit
precision. This is not enough for upcoming enhanced hardwares
and advance usecases like HDR processing. Hence added a new
structure with 32 bit precision values.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-36-alex.hung@amd.com
|
|
This type is used to support a 3x4 matrix in colorops. A 3x4
matrix uses the last column as a "bias" column. Some HW exposes
support for 3x4. The calculation looks like:
out matrix in
|R| |0 1 2 3 | | R |
|G| = |4 5 6 7 | x | G |
|B| |8 9 10 11| | B |
|1.0|
This is also the first colorop where we need a blob property to
program the property. For that we'll introduce a new DATA
property that can be used by all colorop TYPEs requiring a
blob. The way a DATA blob is read depends on the TYPE of
the colorop.
We only create the DATA property for property types that
need it.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-19-alex.hung@amd.com
|
|
With the introduction of the pre-blending color pipeline we
can no longer have color operations that don't have a clear
position in the color pipeline. We deprecate all existing
plane properties. For upstream drivers those are:
- COLOR_ENCODING
- COLOR_RANGE
Drivers are expected to ignore these properties when
programming the HW. DRM clients that register with
DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE will not be allowed to
set the COLOR_ENCODING and COLOR_RANGE properties.
Setting of the COLOR_PIPELINE plane property or drm_colorop
properties is only allowed for userspace that sets this
client cap.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-12-alex.hung@amd.com
|
|
Add a read-only TYPE property. The TYPE specifies the colorop
type, such as enumerated curve, 1D LUT, CTM, 3D LUT, PWL LUT,
etc.
For now we're only introducing an enumerated 1D LUT type to
illustrate the concept.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-6-alex.hung@amd.com
|
|
This patches introduces a new drm_colorop mode object. This
object represents color transformations and can be used to
define color pipelines.
We also introduce the drm_colorop_state here, as well as
various helpers and state tracking bits.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-5-alex.hung@amd.com
|
|
Introduce a socket-specific io_uring_cmd to support
getsockname/getpeername via io_uring. I made this an io_uring_cmd
instead of a new operation to avoid polluting the command namespace with
what is exclusively a socket operation. In addition, since we don't
need to conform to existing interfaces, this merges the
getsockname/getpeername in a single operation, since the implementation
is pretty much the same.
This has been frequently requested, for instance at [1] and more
recently in the project Discord channel. The main use-case is to support
fixed socket file descriptors.
[1] https://github.com/axboe/liburing/issues/1356
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Jason Gunthorpe says:
====================
This series is the start of adding full DMABUF support to
iommufd. Currently it is limited to only work with VFIO's DMABUF exporter.
It sits on top of Leon's series to add a DMABUF exporter to VFIO:
https://lore.kernel.org/all/20251120-dmabuf-vfio-v9-0-d7f71607f371@nvidia.com/
The existing IOMMU_IOAS_MAP_FILE is enhanced to detect DMABUF fd's, but
otherwise works the same as it does today for a memfd. The user can select
a slice of the FD to map into the ioas and if the underliyng alignment
requirements are met it will be placed in the iommu_domain.
Though limited, it is enough to allow a VMM like QEMU to connect MMIO BAR
memory from VFIO to an iommu_domain controlled by iommufd. This is used
for PCI Peer to Peer support in VMs, and is the last feature that the VFIO
type 1 container has that iommufd couldn't do.
The VFIO type1 version extracts raw PFNs from VMAs, which has no lifetime
control and is a use-after-free security problem.
Instead iommufd relies on revokable DMABUFs. Whenever VFIO thinks there
should be no access to the MMIO it can shoot down the mapping in iommufd
which will unmap it from the iommu_domain. There is no automatic remap,
this is a safety protocol so the kernel doesn't get stuck. Userspace is
expected to know it is doing something that will revoke the dmabuf and
map/unmap it around the activity. Eg when QEMU goes to issue FLR it should
do the map/unmap to iommufd.
Since DMABUF is missing some key general features for this use case it
relies on a "private interconnect" between VFIO and iommufd via the
vfio_pci_dma_buf_iommufd_map() call.
The call confirms the DMABUF has revoke semantics and delivers a phys_addr
for the memory suitable for use with iommu_map().
Medium term there is a desire to expand the supported DMABUFs to include
GPU drivers to support DPDK/SPDK type use cases so future series will work
to add a general concept of revoke and a general negotiation of
interconnect to remove vfio_pci_dma_buf_iommufd_map().
I also plan another series to modify iommufd's vfio_compat to
transparently pull a dmabuf out of a VFIO VMA to emulate more of the uAPI
of type1.
The latest series for interconnect negotation to exchange a phys_addr is:
https://lore.kernel.org/r/20251027044712.1676175-1-vivek.kasireddy@intel.com
And the discussion for design of revoke is here:
https://lore.kernel.org/dri-devel/20250114173103.GE5556@nvidia.com/
====================
Based on a shared branch with vfio.
* iommufd_dmabuf:
iommufd/selftest: Add some tests for the dmabuf flow
iommufd: Accept a DMABUF through IOMMU_IOAS_MAP_FILE
iommufd: Have iopt_map_file_pages convert the fd to a file
iommufd: Have pfn_reader process DMABUF iopt_pages
iommufd: Allow MMIO pages in a batch
iommufd: Allow a DMABUF to be revoked
iommufd: Do not map/unmap revoked DMABUFs
iommufd: Add DMABUF to iopt_pages
vfio/pci: Add vfio_pci_dma_buf_iommufd_map()
vfio/nvgrace: Support get_dmabuf_phys
vfio/pci: Add dma-buf export support for MMIO regions
vfio/pci: Enable peer-to-peer DMA transactions by default
vfio/pci: Share the core device pointer while invoking feature functions
vfio: Export vfio device get and put registration helpers
dma-buf: provide phys_vec to scatter-gather mapping routine
PCI/P2PDMA: Document DMABUF model
PCI/P2PDMA: Provide an access to pci_p2pdma_map_type() function
PCI/P2PDMA: Refactor to separate core P2P functionality from memory allocation
PCI/P2PDMA: Simplify bus address mapping API
PCI/P2PDMA: Separate the mmap() support from the core logic
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A vDEVICE has been a hard requirement for attaching a nested domain to the
device. This makes sense when installing a guest STE, since a vSID must be
present and given to the kernel during the vDEVICE allocation.
But, when CR0.SMMUEN is disabled, VM doesn't really need a vSID to program
the vSMMU behavior as GBPA will take effect, in which case the vSTE in the
nested domain could have carried the bypass or abort configuration in GBPA
register. Thus, having such a hard requirement doesn't work well for GBPA.
Skip vmaster allocation in arm_smmu_attach_prepare_vmaster() for an abort
or bypass vSTE. Note that device on this attachment won't report vevents.
Update the uAPI doc accordingly.
Link: https://patch.msgid.link/r/20251103172755.2026145-1-nicolinc@nvidia.com
Tested-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add struct acrn_mmio_dev_res before struct acrn_mmio_dev.
The former is used in the latter and breaking them up provides
better kernel-doc documentation for the struct members.
Suggested-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Fei Li <fei1.li@intel.com>
Link: https://patch.msgid.link/20251028040409.868254-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the TMS is switched on, the node uses PWM (Pulse Width
Modulation) during the data phase instead of the classic NRZ (Non
Return to Zero) encoding.
PWM is configured by three parameters:
- PWMS: Pulse Width Modulation Short phase
- PWML: Pulse Width Modulation Long phase
- PWMO: Pulse Width Modulation Offset time
For each of these parameters, define three IFLA symbols:
- IFLA_CAN_PWM_PWM*_MIN: the minimum allowed value.
- IFLA_CAN_PWM_PWM*_MAX: the maximum allowed value.
- IFLA_CAN_PWM_PWM*: the runtime value.
This results in a total of nine IFLA symbols which are all nested in a
parent IFLA_CAN_XL_PWM symbol.
IFLA_CAN_PWM_PWM*_MIN and IFLA_CAN_PWM_PWM*_MAX define the range of
allowed values and will match the value statically configured by the
device in struct can_pwm_const.
IFLA_CAN_PWM_PWM* match the runtime values stored in struct can_pwm.
Those parameters may only be configured when the tms mode is on. If
the PWMS, PWML and PWMO parameters are provided, check that all the
needed parameters are present using can_validate_pwm(), then check
their value using can_validate_pwm_bittiming(). PWMO defaults to zero
if omitted. Otherwise, if CAN_CTRLMODE_XL_TMS is true but none of the
PWM parameters are provided, calculate them using can_calc_pwm().
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251126-canxl-v8-11-e7e3eb74f889@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The Transceiver Mode Switching (TMS) indicates whether the CAN XL
controller shall use the PWM or NRZ encoding during the data phase.
The term "transceiver mode switching" is used in both ISO 11898-1 and
CiA 612-2 (although only the latter one uses the abbreviation TMS). We
adopt the same naming convention here for consistency.
Add the CAN_CTRLMODE_XL_TMS flag to the list of the CAN control modes.
Add can_validate_xl_flags() to check the coherency of the TMS flag.
That function will be reused in upcoming changes to validate the other
CAN XL flags.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251126-canxl-v8-6-e7e3eb74f889@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
CAN XL uses bittiming parameters different from Classical CAN and CAN
FD. Thus, all the data bittiming parameters, including TDC, need to be
duplicated for CAN XL.
Add the CAN XL netlink interface for all the features which are common
with CAN FD. Any new CAN XL specific features are added later on.
The first time CAN XL is activated, the MTU is set by default to
CANXL_MAX_MTU. The user may then configure a custom MTU within the
CANXL_MIN_MTU to CANXL_MAX_MTU range, in which case, the custom MTU
value will be kept as long as CAN XL remains active.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251126-canxl-v8-5-e7e3eb74f889@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
ISO 11898-1:2024 adds a new restricted operation mode. This mode is
added as a mandatory feature for nodes which support CAN XL and is
retrofitted as optional for legacy nodes (i.e. the ones which only
support Classical CAN and CAN FD).
The restricted operation mode is nearly the same as the listen only
mode: the node can not send data frames or remote frames and can not
send dominant bits if an error occurs. The only exception is that the
node shall still send the acknowledgment bit. A second niche exception
is that the node may still send a data frame containing a time
reference message if the node is a primary time provider, but because
the time provider feature is not yet implemented in the kernel, this
second exception is not relevant to us at the moment.
Add the CAN_CTRLMODE_RESTRICTED control mode flag and update the
can_dev_dropped_skb() helper function accordingly.
Finally, bail out if both CAN_CTRLMODE_LISTENONLY and
CAN_CTRLMODE_RESTRICTED are provided.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251126-canxl-v8-4-e7e3eb74f889@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
KVM guest_memfd changes for 6.19:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety of
rough edges in guest_memfd along the way.
- Define a CLASS to automatically handle get+put when grabbing a guest_memfd
from a memslot to make it harder to leak references.
- Enhance KVM selftests to make it easer to develop and debug selftests like
those added for guest_memfd NUMA support, e.g. where test and/or KVM bugs
often result in hard-to-debug SIGBUS errors.
- Misc cleanups.
|
|
Add a comment on regeneration to the generated files.
The comment is placed after the YNL-GEN line[1], as to not interfere
with ynl-regen.sh's detection logic.
[1] and after the optional YNL-ARG line.
Link: https://lore.kernel.org/r/aR5m174O7pklKrMR@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251120174429.390574-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Delete an empty line prevent a kernel-doc warning:
Warning: ../include/uapi/linux/nl80211-vnd-intel.h:86 bad line:
Fixes: 3d2a2544eae9 ("nl80211: vendor-cmd: add Intel vendor commands for iwlmei usage")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251125022834.3171742-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In a recent commit, I inadvertently changed a comparison from being an
unsigned comparison (on 64-bit systems) to being a signed comparison
(which it had always been on 32-bit systems). This led to a sporadic
fstests failure.
To make sure this comparison is always unsigned, introduce a new type,
uoff_t which is the unsigned version of loff_t. Generally file sizes
are restricted to being a signed integer, but in these two places it is
convenient to pass -1 to indicate "up to the end of the file".
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20251123220518.1447261-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The shutdown ioctl should follow the XFS one, which use magic number 'X',
and ioctl number 125, with a uint32 as flags.
For now btrfs don't distinguish DEFAULT and LOGFLUSH flags (just like
f2fs), both will freeze the fs first (implies committing the current
transaction), setting the SHUTDOWN flag and finally thaw the fs.
For NOLOGFLUSH flag, the freeze/thaw part is skipped thus the current
transaction is aborted.
The new shutdown ioctl is hidden behind experimental features for more
testing.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <asj@kernel.org>
Tested-by: Anand Jain <asj@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move the gpib drivers out of staging and into the "real" part of the
kernel. This entails:
- Remove the gpib Kconfig menu and Makefile build rule from staging.
- Remove gpib/uapi from the header file search path in subdir-ccflags
of the gpib Makefile
- move the gpib/uapi files to include/uapi/linux
- Move the gpib tree out of staging to drivers.
- Remove the word "Linux" from the gpib Kconfig file.
- Add the gpib Kconfig menu and Makefile build rule to drivers
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://patch.msgid.link/20251117144021.23569-5-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Arm FEAT_SPE_FDS adds the ability to filter on the data source of a
packet using another 64-bits of event filtering control. As the existing
perf_event_attr::configN fields are all used up for SPE PMU, an
additional field is needed. Add a new 'config4' field.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
|
|
The spec requires at least one interface respectively country.
It allows multiple ones. This needs to be clearly said in the UAPI.
This is subject to sanity checking in cdc_parse_cdc_header(), thus
we can trust the length.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251111134641.4118827-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Setting KVM_CAP_S390_USER_OPEREXEC will forward all operation
exceptions to user space. This also includes the 0x0000 instructions
managed by KVM_CAP_S390_USER_INSTR0. It's helpful if user space wants
to emulate instructions which do not (yet) have an opcode.
While we're at it refine the documentation for
KVM_CAP_S390_USER_INSTR0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Add support for exporting PCI device MMIO regions through dma-buf,
enabling safe sharing of non-struct page memory with controlled
lifetime management. This allows RDMA and other subsystems to import
dma-buf FDs and build them into memory regions for PCI P2P operations.
The implementation provides a revocable attachment mechanism using
dma-buf move operations. MMIO regions are normally pinned as BARs
don't change physical addresses, but access is revoked when the VFIO
device is closed or a PCI reset is issued. This ensures kernel
self-defense against potentially hostile userspace.
Currently VFIO can take MMIO regions from the device's BAR and map
them into a PFNMAP VMA with special PTEs. This mapping type ensures
the memory cannot be used with things like pin_user_pages(), hmm, and
so on. In practice only the user process CPU and KVM can safely make
use of these VMA. When VFIO shuts down these VMAs are cleaned by
unmap_mapping_range() to prevent any UAF of the MMIO beyond driver
unbind.
However, VFIO type 1 has an insecure behavior where it uses
follow_pfnmap_*() to fish a MMIO PFN out of a VMA and program it back
into the IOMMU. This has a long history of enabling P2P DMA inside
VMs, but has serious lifetime problems by allowing a UAF of the MMIO
after the VFIO driver has been unbound.
Introduce DMABUF as a new safe way to export a FD based handle for the
MMIO regions. This can be consumed by existing DMABUF importers like
RDMA or DRM without opening an UAF. A following series will add an
importer to iommufd to obsolete the type 1 code and allow safe
UAF-free MMIO P2P in VM cases.
DMABUF has a built in synchronous invalidation mechanism called
move_notify. VFIO keeps track of all drivers importing its MMIO and
can invoke a synchronous invalidation callback to tell the importing
drivers to DMA unmap and forget about the MMIO pfns. This process is
being called revoke. This synchronous invalidation fully prevents any
lifecycle problems. VFIO will do this before unbinding its driver
ensuring there is no UAF of the MMIO beyond the driver lifecycle.
Further, VFIO has additional behavior to block access to the MMIO
during things like Function Level Reset. This is because some poor
platforms may experience a MCE type crash when touching MMIO of a PCI
device that is undergoing a reset. Today this is done by using
unmap_mapping_range() on the VMAs. Extend that into the DMABUF world
and temporarily revoke the MMIO from the DMABUF importers during FLR
as well. This will more robustly prevent an errant P2P from possibly
upsetting the platform.
A DMABUF FD is a preferred handle for MMIO compared to using something
like a pgmap because:
- VFIO is supported, including its P2P feature, on archs that don't
support pgmap
- PCI devices have all sorts of BAR sizes, including ones smaller
than a section so a pgmap cannot always be created
- It is undesirable to waste a lot of memory for struct pages,
especially for a case like a GPU with ~100GB of BAR size
- We want a synchronous revoke semantic to support FLR with light
hardware requirements
Use the P2P subsystem to help generate the DMA mapping. This is a
significant upgrade over the abuse of dma_map_resource() that has
historically been used by DMABUF exporters. Experience with an OOT
version of this patch shows that real systems do need this. This
approach deals with all the P2P scenarios:
- Non-zero PCI bus_offset
- ACS flags routing traffic to the IOMMU
- ACS flags that bypass the IOMMU - though vfio noiommu is required
to hit this.
There will be further work to formalize the revoke semantic in
DMABUF. For now this acts like a move_notify dynamic exporter where
importer fault handling will get a failure when they attempt to map.
This means that only fully restartable fault capable importers can
import the VFIO DMABUFs. A future revoke semantic should open this up
to more HW as the HW only needs to invalidate, not handle restartable
faults.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251120-dmabuf-vfio-v9-10-d7f71607f371@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Support querying and resetting to default param values.
Introduce two new devlink netlink attrs:
DEVLINK_ATTR_PARAM_VALUE_DEFAULT and
DEVLINK_ATTR_PARAM_RESET_DEFAULT. The former is used to contain an
optional parameter value inside of the param_value nested
attribute. The latter is used in param-set requests from userspace to
indicate that the driver should reset the param to its default value.
To implement this, two new functions are added to the devlink driver
api: devlink_param::get_default() and
devlink_param::reset_default(). These callbacks allow drivers to
implement default param actions for runtime and permanent cmodes. For
driverinit params, the core latches the last value set by a driver via
devl_param_driverinit_value_set(), and uses that as the default value
for a param.
Because default parameter values are optional, it would be impossible
to discern whether or not a param of type bool has default value of
false or not provided if the default value is encoded using a netlink
flag type. For this reason, when a DEVLINK_PARAM_TYPE_BOOL has an
associated default value, the default value is encoded using a u8
type.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for 1600Gbps link modes based on 200Gbps per lane [1].
This includes the adopted IEEE 802.3dj copper and optical PMDs that use
200G/lane signaling [2].
Add the following PMD types:
- KR8 (backplane)
- CR8 (copper cable)
- DR8 (SMF 500m)
- DR8-2 (SMF 2km)
These modes are defined in the 802.3dj specifications.
References:
[1] https://www.ieee802.org/3/dj/public/23_03/opsasnick_3dj_01a_2303.pdf
[2] https://www.ieee802.org/3/dj/projdoc/objectives_P802d3dj_240314.pdf
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/1763585297-1243980-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13f4 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346ca ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the arm platforms from Rockchips
NXP, ASpeed and Broadcom, addressing issues with accidental
overclocking, pinctrl, network and dtc warnings.
There are additional fixes for regressions with the i.MX reset and
memory controller drivers as well as the Tegra memory controller
driver.
Minor updates to the MAINTAINERS file, tee documentation and
defconfigs bring those up to date with recent changes elsewhere"
* tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
MAINTAINERS: sync omap devicetree maintainers with omap platform
MAINTAINERS: Update Krzysztof Kozlowski's email
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
tee: <uapi/linux/tee.h: fix all kernel-doc issues
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
reset: imx8mp-audiomix: Fix bad mask values
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
arm64: defconfig: Fix V3D deferred probe timeout
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
memory: tegra210: Fix incorrect client ids
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
...
|
|
And expand it to encompass all pressure pads.
Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.
Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38a3 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.
In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).
Commit 7075ae4ac9db ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.
This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
