aboutsummaryrefslogtreecommitdiffstats
path: root/include/uapi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-01-22Merge tag 'net-next-6.14' of ↵Linus Torvalds16-892/+935
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "This is slightly smaller than usual, with the most interesting work being still around RTNL scope reduction. Core: - More core refactoring to reduce the RTNL lock contention, including preparatory work for the per-network namespace RTNL lock, replacing RTNL lock with a per device-one to protect NAPI-related net device data and moving synchronize_net() calls outside such lock. - Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and more specific TCP coverage. - Reduce network namespace tear-down time by removing per-subsystems synchronize_net() in tipc and sched. - Add flow label selector support for fib rules, allowing traffic redirection based on such header field. Netfilter: - Do not remove netdev basechain when last device is gone, allowing netdev basechains without devices. - Revisit the flowtable teardown strategy, dealing better with fin, reset and re-open events. - Scale-up IP-vs connection dumping by avoiding linear search on each restart. Protocols: - A significant XDP socket refactor, consolidating and optimizing several helpers into the core - Better scaling of ICMP rate-limiting, by removing false-sharing in inet peers handling. - Introduces netlink notifications for multicast IPv4 and IPv6 address changes. - Add ipsec support for IP-TFS/AggFrag encapsulation, allowing aggregation and fragmentation of the inner IP. - Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to avoid local port exhaustion issues when the average connection lifetime is very short. - Support updating keys (re-keying) for connections using kernel TLS (for TLS 1.3 only). - Support ipv4-mapped ipv6 address clients in smc-r v2. - Add support for jumbo data packet transmission in RxRPC sockets, gluing multiple data packets in a single UDP packet. - Support RxRPC RACK-TLP to manage packet loss and retransmission in conjunction with the congestion control algorithm. Driver API: - Introduce a unified and structured interface for reporting PHY statistics, exposing consistent data across different H/W via ethtool. - Make timestamping selectable, allow the user to select the desired hwtstamp provider (PHY or MAC) administratively. - Add support for configuring a header-data-split threshold (HDS) value via ethtool, to deal with partial or buggy H/W implementation. - Consolidate DSA drivers Energy Efficiency Ethernet support. - Add EEE management to phylink, making use of the phylib implementation. - Add phylib support for in-band capabilities negotiation. - Simplify how phylib-enabled mac drivers expose the supported interfaces. Tests and tooling: - Make the YNL tool package-friendly to make it easier to deploy it separately from the kernel. - Increase TCP selftest coverage importing several packetdrill test-cases. - Regenerate the ethtool uapi header from the YNL spec, to ease maintenance and future development. - Add YNL support for decoding the link types used in net self-tests, allowing a single build to run both net and drivers/net. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - add cross E-Switch QoS support - add SW Steering support for ConnectX-8 - implement support for HW-Managed Flow Steering, improving the rule deletion/insertion rate - support for multi-host LAG - Intel (ixgbe, ice, igb): - ice: add support for devlink health events - ixgbe: add initial support for E610 chipset variant - igb: add support for AF_XDP zero-copy - Meta: - add support for basic RSS config - allow changing the number of channels - add hardware monitoring support - Broadcom (bnxt): - implement TCP data split and HDS threshold ethtool support, enabling Device Memory TCP. - Marvell Octeon: - implement egress ipsec offload support for the cn10k family - Hisilicon (HIBMC): - implement unicast MAC filtering - Ethernet NICs embedded and virtual: - Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding contented atomic operations for drop counters - Freescale: - quicc: phylink conversion - enetc: support Tx and Rx checksum offload and improve TSO performances - MediaTek: - airoha: introduce support for ETS and HTB Qdisc offload - Microchip: - lan78XX USB: preparation work for phylink conversion - Synopsys (stmmac): - support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45 - refactor EEE support to leverage the new driver API - optimize DMA and cache access to increase raw RX performances by 40% - TI: - icssg-prueth: add multicast filtering support for VLAN interface - netkit: - add ability to configure head/tailroom - VXLAN: - accepts packets with user-defined reserved bit - Ethernet switches: - Microchip: - lan969x: add RGMII support - lan969x: improve TX and RX performance using the FDMA engine - nVidia/Mellanox: - move Tx header handling to PCI driver, to ease XDP support - Ethernet PHYs: - Texas Instruments DP83822: - add support for GPIO2 clock output - Realtek: - 8169: add support for RTL8125D rev.b - rtl822x: add hwmon support for the temperature sensor - Microchip: - add support for RDS PTP hardware - consolidate periodic output signal generation - CAN: - several DT-bindings to DT schema conversions - tcan4x5x: - add HW standby support - support nWKRQ voltage selection - kvaser: - allowing Bus Error Reporting runtime configuration - WiFi: - the on-going Multi-Link Operation (MLO) effort continues, affecting both the stack and in drivers - mac80211/cfg80211: - Emergency Preparedness Communication Services (EPCS) station mode support - support for adding and removing station links for MLO - add support for WiFi 7/EHT mesh over 320 MHz channels - report Tx power info for each link - RealTek (rtw88): - enable USB Rx aggregation and USB 3 to improve performance - LED support - RealTek (rtw89): - refactor power save to support Multi-Link Operations - add support for RTL8922AE-VS variant - MediaTek (mt76): - single wiphy multiband support (preparation for MLO) - p2p device support - add TP-Link TXE50UH USB adapter support - Qualcomm (ath10k): - support for the QCA6698AQ IP core - Qualcomm (ath12k): - enable MLO for QCN9274 - Bluetooth: - Allow sysfs to trigger hdev reset, to allow recovering devices not responsive from user-space - MediaTek: add support for MT7922, MT7925, MT7921e devices - Realtek: add support for RTL8851BE devices - Qualcomm: add support for WCN785x devices - ISO: allow BIG re-sync" * tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits) net/rose: prevent integer overflows in rose_setsockopt() net: phylink: fix regression when binding a PHY net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL. ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL. ipv6: Move lifetime validation to inet6_rtm_newaddr(). ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr(). ipv6: Pass dev to inet6_addr_add(). ipv6: Convert inet6_ioctl() to per-netns RTNL. ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup(). ipv6: Hold rtnl_net_lock() in addrconf_dad_work(). ipv6: Hold rtnl_net_lock() in addrconf_verify_work(). ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL. ipv6: Add __in6_dev_get_rtnl_net(). net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags net: mii: Fix the Speed display when the network cable is not connected sysctl net: Remove macro checks for CONFIG_SYSCTL eth: bnxt: update header sizing defaults ...
2025-01-21Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds6-1/+546
Pull drm updates from Dave Airlie: "There are two external interactions of note, the msm tree pull in some opp tree, hopefully the opp tree arrives from the same git tree however it normally does. There is also a new cgroup controller for device memory, that is used by drm, so is merging through my tree. This will hopefully help open up gpu cgroup usage a bit more and move us forward. There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs. Then the usual xe/amdgpu/i915/msm leaders and lots of changes and refactors across the board: core: - device memory cgroup controller added - Remove driver date from drm_driver - Add drm_printer based hex dumper - drm memory stats docs update - scheduler documentation improvements new driver: - amdxdna - Ryzen AI NPU support connector: - add a mutex to protect ELD - make connector setup two-step panels: - Introduce backlight quirks infrastructure - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00, - Multi-Inno Technology MI1010Z1T-1CP11 bridge: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support xe: - make OA buffer size configurable - GuC capture fixes - add ufence and g2h flushes - restore system memory GGTT mappings - ioctl fixes - SRIOV PF scheduling priority - allow fault injection - lots of improvements/refactors - Enable GuC's WA_DUAL_QUEUE for newer platforms - IRQ related fixes and improvements i915: - More accurate engine busyness metrics with GuC submission - Ensure partial BO segment offset never exceeds allowed max - Flush GuC CT receive tasklet during reset preparation - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs - Fix DG1 power gate sequence - Enabling uncompressed 128b/132b UHBR SST - Handle hdmi connector init failures, and no HDMI/DP cases - More robust engine resets on Haswell and older i915/xe display: - HDCP fixes for Xe3Lpd - New GSC FW ARL-H/ARL-U - support 3 VDSC engines 12 slices - MBUS joining sanitisation - reconcile i915/xe display power mgmt - Xe3Lpd fixes - UHBR rates for Thunderbolt amdgpu: - DRM panic support - track BO memory stats at runtime - Fix max surface handling in DC - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates - Fix doorbell ttm cleanup - RAS updates - ISP updates - SDMA queue reset support - Rework DPM powergating interfaces - Documentation updates and cleanups - DCN 3.5 updates - Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate - Add debugfs interfaces for forcing scheduling to specific engine instances - GG 9.5 updates - IH 4.4 updates - Make missing optional firmware less noisy - PSP 13.x updates - SMU 13.x updates - VCN 5.x updates - JPEG 5.x updates - GC 12.x updates - DC FAMS updates amdkfd: - GG 9.5 updates - Logging improvements - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix msm: - MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support - DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - added CWB hardware blocks support - DSI: - added SM6150 (aka QCS615) support - GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting rcar-du: - Add r8a779h0 Support ivpu: - Fix qemu crash when using passthrough nouveau: - expose GSP-RM logging buffers via debugfs panfrost: - Add MT8188 Mali-G57 MC3 support rockchip: - Gamma LUT support hisilicon: - new HIBMC support virtio-gpu: - convert to helpers - add prime support for scanout buffers v3d: - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL vc4: - Add support for BCM2712 vkms: - line-per-line compositing algorithm to improve performance zynqmp: - Add DP audio support mediatek: - dp: Add sdp path reset - dp: Support flexible length of DP calibration data etnaviv: - add fdinfo memory support - add explicit reset handling" * tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits) drm/bridge: fix documentation for the hdmi_audio_prepare() callback doc/cgroup: Fix title underline length drm/doc: Include new drm-compute documentation cgroup/dmem: Fix parameters documentation cgroup/dmem: Select PAGE_COUNTER kernel/cgroup: Remove the unused variable climit drm/display: hdmi: Do not read EDID on disconnected connectors drm/tests: hdmi: Add connector disablement test drm/connector: hdmi: Do atomic check when necessary drm/amd/display: 3.2.316 drm/amd/display: avoid reset DTBCLK at clock init drm/amd/display: improve dpia pre-train drm/amd/display: Apply DML21 Patches drm/amd/display: Use HW lock mgr for PSR1 drm/amd/display: Revised for Replay Pseudo vblank control drm/amd/display: Add a new flag for replay low hz drm/amd/display: Remove unused read_ono_state function from Hwss module drm/amd/display: Do not elevate mem_type change to full update drm/amd/display: Do not wait for PSR disable on vbl enable drm/amd/display: Remove unnecessary eDP power down ...
2025-01-21PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFTDongdong Zhang1-3/+0
Remove duplicate macro PCI_VSEC_HDR and its related macro PCI_VSEC_HDR_LEN_SHIFT from pci_regs.h to avoid redundancy and inconsistencies. Update VFIO PCI code to use PCI_VNDR_HEADER and PCI_VNDR_HEADER_LEN() for consistent naming and functionality. These changes aim to streamline header handling while minimizing impact, given the niche usage of these macros in userspace. Link: https://lore.kernel.org/r/20241216013536.4487-1-zhangdongdong@eswincomputing.com Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2025-01-21nfsd: rework NFS4_SHARE_WANT_* flag handlingJeff Layton1-2/+5
The delstid draft adds new NFS4_SHARE_WANT_TYPE_MASK values that don't fit neatly into the existing WANT_MASK or WHEN_MASK. Add a new NFS4_SHARE_WANT_MOD_MASK value and redefine NFS4_SHARE_WANT_MASK to include it. Also fix the checks in nfsd4_deleg_xgrade_none_ext() to check for the flags instead of equality, since there may be modifier flags in the value. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-01-21iommufd: Fix struct iommu_hwpt_pgfault init and paddingNicolin Chen1-1/+3
The iommu_hwpt_pgfault is used to report IO page fault data to userspace, but iommufd_fault_fops_read was never zeroing its padding. This leaks the content of the kernel stack memory to userspace. Also, the iommufd uAPI requires explicit padding and use of __aligned_u64 to ensure ABI compatibility's with 32 bit. pahole result, before: struct iommu_hwpt_pgfault { __u32 flags; /* 0 4 */ __u32 dev_id; /* 4 4 */ __u32 pasid; /* 8 4 */ __u32 grpid; /* 12 4 */ __u32 perm; /* 16 4 */ /* XXX 4 bytes hole, try to pack */ __u64 addr; /* 24 8 */ __u32 length; /* 32 4 */ __u32 cookie; /* 36 4 */ /* size: 40, cachelines: 1, members: 8 */ /* sum members: 36, holes: 1, sum holes: 4 */ /* last cacheline: 40 bytes */ }; pahole result, after: struct iommu_hwpt_pgfault { __u32 flags; /* 0 4 */ __u32 dev_id; /* 4 4 */ __u32 pasid; /* 8 4 */ __u32 grpid; /* 12 4 */ __u32 perm; /* 16 4 */ __u32 __reserved; /* 20 4 */ __u64 addr __attribute__((__aligned__(8))); /* 24 8 */ __u32 length; /* 32 4 */ __u32 cookie; /* 36 4 */ /* size: 40, cachelines: 1, members: 9 */ /* forced alignments: 1 */ /* last cacheline: 40 bytes */ } __attribute__((__aligned__(8))); Fixes: c714f15860fc ("iommufd: Add fault and response message definitions") Link: https://patch.msgid.link/r/20250120195051.2450-1-nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-01-21misc: pci_endpoint_test: Add consecutive BAR testNiklas Cassel1-0/+1
Add a more advanced BAR test that writes all BARs in one go, and then reads them back and verifies that the value matches the BAR number bitwise OR'ed with offset, this allows us to verify: - The BAR number was what we intended to read - The offset was what we intended to read This allows us to detect potential address translation issues on the EP. Reading back the BAR directly after writing will not allow us to detect the case where inbound address translation on the endpoint incorrectly causes multiple BARs to be redirected to the same memory region (within the EP). Link: https://lore.kernel.org/r/20241116032045.2574168-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-21drm/xe/uapi: Fix documentation indentationRodrigo Vivi1-18/+18
Fix these issues: Documentation/gpu/driver-uapi:29: include/uapi/drm/xe_drm.h:817: WARNING: +Bullet list ends without a blank line; unexpected unindent. Documentation/gpu/driver-uapi:29: include/uapi/drm/xe_drm.h:835: WARNING: +Definition list ends without a blank line; unexpected unindent. Fixes: 75d37750a753 ("drm/xe/mmap: Add mmap support for PCI memory barrier") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/intel-xe/20250117164023.3fdc00b9@canb.auug.org.au/ Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117193827.91779-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-20Merge tag 'for-6.14/io_uring-20250119' of git://git.kernel.dk/linuxLinus Torvalds2-0/+26
Pull io_uring updates from Jens Axboe: "Not a lot in terms of features this time around, mostly just cleanups and code consolidation: - Support for PI meta data read/write via io_uring, with NVMe and SCSI covered - Cleanup the per-op structure caching, making it consistent across various command types - Consolidate the various user mapped features into a concept called regions, making the various users of that consistent - Various cleanups and fixes" * tag 'for-6.14/io_uring-20250119' of git://git.kernel.dk/linux: (56 commits) io_uring/fdinfo: fix io_uring_show_fdinfo() misuse of ->d_iname io_uring: reuse io_should_terminate_tw() for cmds io_uring: Factor out a function to parse restrictions io_uring/rsrc: require cloned buffers to share accounting contexts io_uring: simplify the SQPOLL thread check when cancelling requests io_uring: expose read/write attribute capability io_uring/rw: don't gate retry on completion context io_uring/rw: handle -EAGAIN retry at IO completion time io_uring/rw: use io_rw_recycle() from cleanup path io_uring/rsrc: simplify the bvec iter count calculation io_uring: ensure io_queue_deferred() is out-of-line io_uring/rw: always clear ->bytes_done on io_async_rw setup io_uring/rw: use NULL for rw->free_iovec assigment io_uring/rw: don't mask in f_iocb_flags io_uring/msg_ring: Drop custom destructor io_uring: Move old async data allocation helper to header io_uring/rw: Allocate async data through helper io_uring/net: Allocate msghdr async data through helper io_uring/uring_cmd: Allocate async data through generic helper io_uring/poll: Allocate apoll with generic alloc_cache helper ...
2025-01-20Merge tag 'for-6.14/block-20250118' of git://git.kernel.dk/linuxLinus Torvalds2-1/+3
Pull block updates from Jens Axboe: - NVMe pull requests via Keith: - Target support for PCI-Endpoint transport (Damien) - TCP IO queue spreading fixes (Sagi, Chaitanya) - Target handling for "limited retry" flags (Guixen) - Poll type fix (Yongsoo) - Xarray storage error handling (Keisuke) - Host memory buffer free size fix on error (Francis) - MD pull requests via Song: - Reintroduce md-linear (Yu Kuai) - md-bitmap refactor and fix (Yu Kuai) - Replace kmap_atomic with kmap_local_page (David Reaver) - Quite a few queue freeze and debugfs deadlock fixes Ming introduced lockdep support for this in the 6.13 kernel, and it has (unsurprisingly) uncovered quite a few issues - Use const attributes for IO schedulers - Remove bio ioprio wrappers - Fixes for stacked device atomic write support - Refactor queue affinity helpers, in preparation for better supporting isolated CPUs - Cleanups of loop O_DIRECT handling - Cleanup of BLK_MQ_F_* flags - Add rotational support for null_blk - Various fixes and cleanups * tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits) block: Don't trim an atomic write block: Add common atomic writes enable flag md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add() block: limit disk max sectors to (LLONG_MAX >> 9) block: Change blk_stack_atomic_writes_limits() unit_min check block: Ensure start sector is aligned for stacking atomic writes blk-mq: Move more error handling into blk_mq_submit_bio() block: Reorder the request allocation code in blk_mq_submit_bio() nvme: fix bogus kzalloc() return check in nvme_init_effects_log() md/md-bitmap: move bitmap_{start, end}write to md upper layer md/raid5: implement pers->bitmap_sector() md: add a new callback pers->bitmap_sector() md/md-bitmap: remove the last parameter for bimtap_ops->endwrite() md/md-bitmap: factor behind write counters out from bitmap_{start/end}write() md: Replace deprecated kmap_atomic() with kmap_local_page() md: reintroduce md-linear partitions: ldm: remove the initial kernel-doc notation blk-cgroup: rwstat: fix kernel-doc warnings in header file blk-cgroup: fix kernel-doc warnings in header file nbd: fix partial sending ...
2025-01-20Merge tag 'vfs-6.14-rc1.statx.dio' of ↵Linus Torvalds1-24/+75
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs direct-io updates from Christian Brauner: "File systems that write out of place usually require different alignment for direct I/O writes than what they can do for reads. Add a separate dio read align field to statx, as many out of place write file systems can easily do reads aligned to the device sector size, but require bigger alignment for writes. This is usually papered over by falling back to buffered I/O for smaller writes and doing read-modify-write cycles, but performance for this sucks, so applications benefit from knowing the actual write alignment" * tag 'vfs-6.14-rc1.statx.dio' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: xfs: report larger dio alignment for COW inodes xfs: report the correct read/write dio alignment for reflinked inodes xfs: cleanup xfs_vn_getattr fs: add STATX_DIO_READ_ALIGN fs: reformat the statx definition
2025-01-20Merge tag 'vfs-6.14-rc1.misc' of ↵Linus Torvalds2-15/+38
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull misc vfs updates from Christian Brauner: "Features: - Support caching symlink lengths in inodes The size is stored in a new union utilizing the same space as i_devices, thus avoiding growing the struct or taking up any more space When utilized it dodges strlen() in vfs_readlink(), giving about 1.5% speed up when issuing readlink on /initrd.img on ext4 - Add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag If a file system supports uncached buffered IO, it may set FOP_DONTCACHE and enable support for RWF_DONTCACHE. If RWF_DONTCACHE is attempted without the file system supporting it, it'll get errored with -EOPNOTSUPP - Enable VBOXGUEST and VBOXSF_FS on ARM64 Now that VirtualBox is able to run as a host on arm64 (e.g. the Apple M3 processors) we can enable VBOXSF_FS (and in turn VBOXGUEST) for this architecture. Tested with various runs of bonnie++ and dbench on an Apple MacBook Pro with the latest Virtualbox 7.1.4 r165100 installed Cleanups: - Delay sysctl_nr_open check in expand_files() - Use kernel-doc includes in fiemap docbook - Use page->private instead of page->index in watch_queue - Use a consume fence in mnt_idmap() as it's heavily used in link_path_walk() - Replace magic number 7 with ARRAY_SIZE() in fc_log - Sort out a stale comment about races between fd alloc and dup2() - Fix return type of do_mount() from long to int - Various cosmetic cleanups for the lockref code Fixes: - Annotate spinning as unlikely() in __read_seqcount_begin The annotation already used to be there, but got lost in commit 52ac39e5db51 ("seqlock: seqcount_t: Implement all read APIs as statement expressions") - Fix proc_handler for sysctl_nr_open - Flush delayed work in delayed fput() - Fix grammar and spelling in propagate_umount() - Fix ESP not readable during coredump In /proc/PID/stat, there is the kstkesp field which is the stack pointer of a thread. While the thread is active, this field reads zero. But during a coredump, it should have a valid value However, at the moment, kstkesp is zero even during coredump - Don't wake up the writer if the pipe is still full - Fix unbalanced user_access_end() in select code" * tag 'vfs-6.14-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits) gfs2: use lockref_init for qd_lockref erofs: use lockref_init for pcl->lockref dcache: use lockref_init for d_lockref lockref: add a lockref_init helper lockref: drop superfluous externs lockref: use bool for false/true returns lockref: improve the lockref_get_not_zero description lockref: remove lockref_put_not_zero fs: Fix return type of do_mount() from long to int select: Fix unbalanced user_access_end() vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64 pipe_read: don't wake up the writer if the pipe is still full selftests: coredump: Add stackdump test fs/proc: do_task_stat: Fix ESP not readable during coredump fs: add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag fs: sort out a stale comment about races between fd alloc and dup2 fs: Fix grammar and spelling in propagate_umount() fs: fc_log replace magic number 7 with ARRAY_SIZE() fs: use a consume fence in mnt_idmap() file: flush delayed work in delayed fput() ...
2025-01-20Merge tag 'asoc-v6.14' of ↵Takashi Iwai5-31/+61
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.14 This was quite a quiet release for what I imagine are holiday related reasons, the diffstat is dominated by some Cirrus Logic Kunit tests. There's the usual mix of small improvements and fixes, plus a few new drivers and features. The diffstat includes some DRM changes due to work on HDMI audio. - Allow clocking on each DAI in an audio graph card to be configured separately. - Improved power management for Renesas RZ-SSI. - KUnit testing for the Cirrus DSP framework. - Memory to meory operation support for Freescale/NXP platforms. - Support for pause operations in SOF. - Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek ALC5682I-VE
2025-01-20Merge tag 'kvm-x86-misc-6.14' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini1-4/+0
KVM x86 misc changes for 6.14: - Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities instead of just those where KVM needs to manage state and/or explicitly enable the feature in hardware. Along the way, refactor the code to make it easier to add features, and to make it more self-documenting how KVM is handling each feature. - Rework KVM's handling of VM-Exits during event vectoring; this plugs holes where KVM unintentionally puts the vCPU into infinite loops in some scenarios (e.g. if emulation is triggered by the exit), and brings parity between VMX and SVM. - Add pending request and interrupt injection information to the kvm_exit and kvm_entry tracepoints respectively. - Fix a relatively benign flaw where KVM would end up redoing RDPKRU when loading guest/host PKRU, due to a refactoring of the kernel helpers that didn't account for KVM's pre-checking of the need to do WRPKRU.
2025-01-18Merge tag 'wireless-next-2025-01-17' of ↵Jakub Kicinski1-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Most likely the last "new features" pull request for v6.14 and this is a bigger one. Multi-Link Operation (MLO) work continues both in stack in drivers. Few new devices supported and usual fixes all over. Major changes: cfg80211 * Emergency Preparedness Communication Services (EPCS) station mode support mac80211 * an option to filter a sta from being flushed * some support for RX Operating Mode Indication (OMI) power saving * support for adding and removing station links for MLO iwlwifi * new device ids * rework firmware error handling and restart rtw88 * RTL8812A: RFE type 2 support * LED support rtw89 * variant info to support RTL8922AE-VS mt76 * mt7996: single wiphy multiband support (preparation for MLO) * mt7996: support for more variants * mt792x: P2P_DEVICE support * mt7921u: TP-Link TXE50UH support ath12k * enable MLO for QCN9274 (although it seems to be broken with dual band devices) * MLO radar detection support * debugfs: transmit buffer OFDMA, AST entry and puncture stats * tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits) wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig wifi: wilc1000: unregister wiphy only after netdev registration wifi: cfg80211: adjust allocation of colocated AP data wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf() wifi: ath12k: fix key cache handling wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function wifi: ath12k: Remove ath12k_get_num_hw() helper function wifi: ath12k: Refactor the ath12k_hw get helper function argument wifi: ath12k: Refactor ath12k_hw set helper function argument wifi: mt76: mt7996: add implicit beamforming support for mt7992 wifi: mt76: mt7996: fix beacon command during disabling wifi: mt76: mt7996: fix ldpc setting wifi: mt76: mt7996: fix definition of tx descriptor wifi: mt76: connac: adjust phy capabilities based on band constraints wifi: mt76: mt7996: fix incorrect indexing of MIB FW event wifi: mt76: mt7996: fix HE Phy capability wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU wifi: mt76: mt7996: add max mpdu len capability wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain ... ==================== Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18ubi: Expose interface for detailed erase countersRickard Andersson1-0/+33
Using the ioctl command 'UBI_IOCECNFO' user space can obtain detailed erase counter information of all blocks of a device. Signed-off-by: Rickard Andersson <rickard.andersson@axis.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2025-01-18ALSA: FCP: Add Focusrite Control Protocol driverGeoffrey D. Bennett2-0/+122
Add a new kernel driver for the Focusrite Control Protocol (FCP), which is used by Focusrite Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett USB, Clarett+, and Vocaster series audio interfaces. This driver provides a user-space control interface via ALSA's hwdep subsystem. Unlike the existing Scarlett2 driver which implements all ALSA controls in kernel space, this new FCP driver takes a different approach by providing a minimal kernel interface that allows a user-space driver to send FCP commands and receive notifications. The only control implemented in kernel space is the Level Meter, since it requires frequent polling of volatile data. While this driver supports all interfaces that the Scarlett2 driver works with, it is initially enabled only for 4th Gen 16i16, 18i16, and 18i20 interfaces that are not supported by the Scarlett2 driver. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://patch.msgid.link/597741a9b1198b965561547511d3d345f91cba20.1737048528.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-01-17net: ethtool: ts: add separate counter for unconfirmed one-step TX timestampsVladimir Oltean1-0/+1
For packets with two-step timestamp requests, the hardware timestamp comes back to the driver through a confirmation mechanism of sorts, which allows the driver to confidently bump the successful "pkts" counter. For one-step PTP, the NIC is supposed to autonomously insert its hardware TX timestamp in the packet headers while simultaneously transmitting it. There may be a confirmation that this was done successfully, or there may not. None of the current drivers which implement ethtool_ops :: get_ts_stats() also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it is a bit unclear which model to follow. But there are NICs, such as DSA, where there is no transmit confirmation at all. Here, it would be wrong / misleading to increment the successful "pkts" counter, because one-step PTP packets can be dropped on TX just like any other packets. So introduce a special counter which signifies "yes, an attempt was made, but we don't know whether it also exited the port or not". I expect that for one-step PTP packets where a confirmation is available, the "pkts" counter would be bumped. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17dm-table: atomic writes supportJohn Garry1-2/+2
Support stacking atomic write limits for DM devices. All the pre-existing code in blk_stack_atomic_writes_limits() already takes care of finding the aggregrate limits from the bottom devices. Feature flag DM_TARGET_ATOMIC_WRITES is introduced so that atomic writes can be enabled on personalities selectively. This is to ensure that atomic writes are only enabled when verified to be working properly (for a specific personality). In addition, it just may not make sense to enable atomic writes on some personalities (so this flag also helps there). Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-16net: mdio: add definition for clock stop capable bitRussell King (Oracle)1-0/+1
Add a definition for the clock stop capable bit in the PCS MMD. This bit indicates whether the MAC is able to stop the transmit xMII clock while it is signalling LPI. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADb-0014PV-6T@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16PCI: Add TLP Prefix reading to pcie_read_tlp_log()Ilpo Järvinen1-4/+6
pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log (PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present. Generalize pcie_read_tlp_log() and struct pcie_tlp_log to also handle TLP Prefix Log. The relevant registers are formatted identically in AER and DPC Capability, but has these variations: a) The offsets of TLP Prefix Log registers vary. b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs. c) AER TLP Prefix Log Present (PCIe r6.1 sec 7.8.4.7) can indicate Prefix Log is not present. Therefore callers must pass the offset of the TLP Prefix Log register and the entire length to pcie_read_tlp_log() to be able to read the correct number of TLP Prefix DWORDs from the correct offset. Link: https://lore.kernel.org/r/20250114170840.1633-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: squash ternary fix from https://lore.kernel.org/r/20250116172019.88116-1-colin.i.king@gmail.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-01-16drm/xe/mmap: Add mmap support for PCI memory barrierTejas Upadhyay1-1/+28
In order to avoid having userspace to use MI_MEM_FENCE, we are adding a mechanism for userspace to generate a PCI memory barrier with low overhead (avoiding IOCTL call as well as writing to VRAM will adds some overhead). This is implemented by memory-mapping a page as uncached that is backed by MMIO on the dGPU and thus allowing userspace to do memory write to the page without invoking an IOCTL. We are selecting the MMIO so that it is not accessible from the PCI bus so that the MMIO writes themselves are ignored, but the PCI memory barrier will still take action as the MMIO filtering will happen after the memory barrier effect. When we detect special defined offset in mmap(), We are mapping 4K page which contains the last of page of doorbell MMIO range to userspace for same purpose. For user to query special offset we are adding special flag in mmap_offset ioctl which needs to be passed as follows, struct drm_xe_gem_mmap_offset mmo = { .handle = 0, /* this must be 0 */ .flags = DRM_XE_MMAP_OFFSET_FLAG_PCI_BARRIER, }; igt_ioctl(fd, DRM_IOCTL_XE_GEM_MMAP_OFFSET, &mmo); map = mmap(NULL, size, PROT_WRITE, MAP_SHARED, fd, mmo); IGT : https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/commit/b2dbc6f22815128c0dd5c737504f42e1f1a6ad62 UMD : https://github.com/intel/compute-runtime/pull/772 V7: - Dgpu filter added V6(MAuld) - Move physical mmap to fault handler - Modify kernel-doc and attach UMD PR when ready V5(MAuld) - Return invalid early in case of non 4K PAGE_SIZE - Format kernel-doc and add note for 4K PAGE_SIZE HW limit V4(MAuld) - Add kernel-doc for uapi change - Restrict page size to 4K V3(MAuld) - Remove offset defination from UAPI to be able to change later - Edit commit message for special flag addition V2(MAuld) - Add fault handler with dummy page to handle unplug device - Add Build check for special offset to be below normal start page - Test d3hot, mapping seems to be valid in d3hot as well - Add more info to commit message Cc: Matthew Auld <matthew.auld@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113114201.3178806-1-tejas.upadhyay@intel.com
2025-01-15net: ethtool: add support for configuring hds-threshTaehee Yoo1-0/+2
The hds-thresh option configures the threshold value of the header-data-split. If a received packet size is larger than this threshold value, a packet will be split into header and payload. The header indicates TCP and UDP header, but it depends on driver spec. The bnxt_en driver supports HDS(Header-Data-Split) configuration at FW level, affecting TCP and UDP too. So, If hds-thresh is set, it affects UDP and TCP packets. Example: # ethtool -G <interface name> hds-thresh <value> # ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256 # ethtool -g enp14s0f0np0 Ring parameters for enp14s0f0np0: Pre-set maximums: ... HDS thresh: 1023 Current hardware settings: ... TCP data split: on HDS thresh: 256 The default/min/max values are not defined in the ethtool so the drivers should define themself. The 0 value means that all TCP/UDP packets' header and payload will be split. Tested-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15Merge tag 'loongarch-kvm-6.14' of ↵Paolo Bonzini3-29/+38
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.14 1. Clear LLBCTL if secondary mmu mapping changed. 2. Add hypercall service support for usermode VMM. This is a really small changeset, because the Chinese New Year (Spring Festival) is coming. Happy New Year!
2025-01-15Input: allocate keycode for phone linkingIllia Ostapyshyn1-0/+1
The F11 key on the new Lenovo Thinkpad T14 Gen 5, T16 Gen 3, and P14s Gen 5 laptops includes a symbol showing a smartphone and a laptop chained together. According to the user manual, it starts the Microsoft Phone Link software used to connect to Android/iOS devices and relay messages/calls or sync data. As there are no suitable keycodes for this action, introduce a new one. Signed-off-by: Illia Ostapyshyn <illia@yshyn.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20241114173930.44983-2-illia@yshyn.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-14PCI: Store number of supported End-End TLP PrefixesIlpo Järvinen1-0/+1
eetlp_prefix_path in the struct pci_dev tells if End-End TLP Prefixes are supported by the path or not, and the value is only calculated if CONFIG_PCI_PASID is set. The Max End-End TLP Prefixes field in the Device Capabilities Register 2 also tells how many (1-4) End-End TLP Prefixes are supported (PCIe r6.2 sec 7.5.3.15). The number of supported End-End Prefixes is useful for reading correct number of DWORDs from TLP Prefix Log register in AER capability (PCIe r6.2 sec 7.8.4.12). Replace eetlp_prefix_path with eetlp_prefix_max and determine the number of supported End-End Prefixes regardless of CONFIG_PCI_PASID so that an upcoming commit generalizing TLP Prefix Log register reading does not have to read extra DWORDs for End-End Prefixes that never will be there. The value stored into eetlp_prefix_max is directly derived from device's Max End-End TLP Prefixes and does not consider limitations imposed by bridges or the Root Port beyond supported/not supported flags. This is intentional for two reasons: 1) PCIe r6.2 spec sections 2.2.10.4 & 6.2.4.4 indicate that a TLP is malformed only if the number of prefixes exceed the number of Max End-End TLP Prefixes, which seems to be the case even if the device could never receive that many prefixes due to smaller maximum imposed by a bridge or the Root Port. If TLP parsing is later added, this distinction is significant in interpreting what is logged by the TLP Prefix Log registers and the value matching to the Malformed TLP threshold is going to be more useful. 2) TLP Prefix handling happens autonomously on a low layer and the value in eetlp_prefix_max is not programmed anywhere by the kernel (i.e., there is no limiter OS can control to prevent sending more than N TLP Prefixes). Link: https://lore.kernel.org/r/20250114170840.1633-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
2025-01-14tcp: add LINUX_MIB_PAWS_OLD_ACK SNMP counterEric Dumazet1-0/+1
Prior patch in the series added TCP_RFC7323_PAWS_ACK drop reason. This patch adds the corresponding SNMP counter, for folks using nstat instead of tracing for TCP diagnostics. nstat -az | grep PAWSOldAck Suggested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250113135558.3180360-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14ALSA: rawmidi: Make tied_device=0 as default / unknownTakashi Iwai1-1/+1
In the original change, rawmidi_info.tied_device showed -1 for the unknown or untied device. But this would require the user-space to check the protocol version and judge the value conditionally, which is rather error-prone. Instead, set the tied_device = 0 to be default as unknown, and indicate the real device with the offset 1, for achieving more backward compatibility. Suggested-by: Jaroslav Kysela <perex@perex.cz> Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-01-14Merge tag 'nf-next-25-01-11' of ↵Paolo Abeni1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains a small batch of Netfilter/IPVS updates for net-next: 1) Remove unused genmask parameter in nf_tables_addchain() 2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal. 3) Skip empty buckets in hashlimit to avoid atomic operations that results in false positive reports by syzbot with lockdep enabled, patch from Eric Dumazet. 4) Add conntrack event timestamps available via ctnetlink, from Florian Westphal. netfilter pull request 25-01-11 * tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: conntrack: add conntrack event timestamp netfilter: xt_hashlimit: htable_selective_cleanup() optimization ipvs: speed up reads from ip_vs_conn proc file netfilter: nf_tables: remove the genmask parameter ==================== Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14net: ethtool: add support for structured PHY statisticsJakub Kicinski2-0/+16
Introduce a new way to report PHY statistics in a structured and standardized format using the netlink API. This new method does not replace the old driver-specific stats, which can still be accessed with `ethtool -S <eth name>`. The structured stats are available with `ethtool -S <eth name> --all-groups`. This new method makes it easier to diagnose problems by organizing stats in a consistent and documented way. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-13md: reintroduce md-linearYu Kuai2-1/+3
THe md-linear is removed by commit 849d18e27be9 ("md: Remove deprecated CONFIG_MD_LINEAR") because it has been marked as deprecated for a long time. However, md-linear is used widely for underlying disks with different size, sadly we didn't know this until now, and it's true useful to create partitions and assemble multiple raid and then append one to the other. People have to use dm-linear in this case now, however, they will prefer to minimize the number of involved modules. Fixes: 849d18e27be9 ("md: Remove deprecated CONFIG_MD_LINEAR") Cc: stable@vger.kernel.org Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Coly Li <colyli@kernel.org> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20250102112841.1227111-1-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13wifi: cfg80211: Add support for controlling EPCSIlan Peer1-0/+9
Add support for configuring Emergency Preparedness Communication Services (EPCS) for station mode. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.ea54ac94445c.I11d750188bc0871e13e86146a3b5cc048d853e69@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: cfg80211: Add support for dynamic addition/removal of linksIlan Peer1-0/+10
Add support for requesting dynamic addition/removal of links to the current MLO association. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.cef23352f2a2.I79c849974c494cb1cbf9e1b22a5d2d37395ff5ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: nl80211: permit userspace to pass supported selectorsBenjamin Berg1-0/+9
Currently the SAE_H2E selector already exists, which needs to be implemented by the SME. As new such selectors might be added in the future, add a feature to permit userspace to report a selector as supported. If not given, the kernel should assume that userspace does support SAE_H2E. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250101070249.fe67b871cc39.Ieb98390328927e998e612345a58b6dbc00b0e3a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13Merge 6.13-rc4 into char-misc-nextGreg Kroah-Hartman3-29/+38
We need the IIO fixes in here as well, and it resolves a merge conflict in: drivers/iio/adc/ti-ads1119.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13Merge 6.13-rc7 into usb-nextGreg Kroah-Hartman2-27/+36
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-12delayacct: add delay min to record delay peakWang Yaxin1-0/+8
Delay accounting can now calculate the average delay of processes, detect the overall system load, and also record the 'delay max' to identify potential abnormal delays. However, 'delay min' can help us identify another useful delay peak. By comparing the difference between 'delay max' and 'delay min', we can understand the optimization space for latency, providing a reference for the optimization of latency performance. Use case ========= bash-4.4# ./getdelays -d -t 242 print delayacct stats ON TGID 242 CPU count real total virtual total delay total delay average delay max delay min 39 156000000 156576579 2111069 0.054ms 0.212296ms 0.031307ms IO count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms SWAP count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms RECLAIM count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms THRASHING count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms COMPACT count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms WPCOPY count delay total delay average delay max delay min 156 11215873 0.072ms 0.207403ms 0.033913ms IRQ count delay total delay average delay max delay min 0 0 0.000ms 0.000000ms 0.000000ms Link: https://lkml.kernel.org/r/20241220173105906EOdsPhzjMLYNJJBqgz1ga@zte.com.cn Co-developed-by: Wang Yong <wang.yong12@zte.com.cn> Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Co-developed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Co-developed-by: Kun Jiang <jiang.kun2@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Peilin He <he.peilin@zte.com.cn> Cc: tuqiang <tu.qiang35@zte.com.cn> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12delayacct: add delay max to record delay peakWang Yaxin1-0/+9
Introduce the use cases of delay max, which can help quickly detect potential abnormal delays in the system and record the types and specific details of delay spikes. Problem ======== Delay accounting can track the average delay of processes to show system workload. However, when a process experiences a significant delay, maybe a delay spike, which adversely affects performance, getdelays can only display the average system delay over a period of time. Yet, average delay is unhelpful for diagnosing delay peak. It is not even possible to determine which type of delay has spiked, as this information might be masked by the average delay. Solution ========= the 'delay max' can display delay peak since the system's startup, which can record potential abnormal delays over time, including the type of delay and the maximum delay. This is helpful for quickly identifying crash caused by delay. Use case ========= bash# ./getdelays -d -p 244 print delayacct stats ON PID 244 CPU count real total virtual total delay total delay average delay max 68 192000000 213676651 705643 0.010ms 0.306381ms IO count delay total delay average delay max 0 0 0.000ms 0.000000ms SWAP count delay total delay average delay max 0 0 0.000ms 0.000000ms RECLAIM count delay total delay average delay max 0 0 0.000ms 0.000000ms THRASHING count delay total delay average delay max 0 0 0.000ms 0.000000ms COMPACT count delay total delay average delay max 0 0 0.000ms 0.000000ms WPCOPY count delay total delay average delay max 235 15648284 0.067ms 0.263842ms IRQ count delay total delay average delay max 0 0 0.000ms 0.000000ms [wang.yaxin@zte.com.cn: update docs and fix some spelling errors] Link: https://lkml.kernel.org/r/20241213192700771XKZ8H30OtHSeziGqRVMs0@zte.com.cn Link: https://lkml.kernel.org/r/20241203164848805CS62CQPQWG9GLdQj2_BxS@zte.com.cn Co-developed-by: Wang Yong <wang.yong12@zte.com.cn> Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Co-developed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Co-developed-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Peilin He <he.peilin@zte.com.cn> Cc: tuqiang <tu.qiang35@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-13Merge tag 'drm-msm-next-2025-01-07' of gitlab.freedesktop.org:drm/msm into ↵Dave Airlie1-0/+1
drm-next Updates for v6.14 MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support MDP4: - several small fixes DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - fixed modes filtering for platforms w/o 3DMux - fixed DSPP DSPP_2 / _3 links on several platforms - corrected DSPP definitions on SDM670 - added CWB hardware blocks support - added VBIF to DPU snapshots - dropped struct dpu_rm_requirements DP: - reworked DP audio support DSI: - added SM6150 (aka QCS615) support GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
2025-01-12ALSA: seq: Notify UMP EP and FB changesTakashi Iwai1-1/+11
So far we notify the sequencer client and port changes upon UMP FB changes, but those aren't really corresponding to the UMP updates. e.g. when a FB info gets updated, it's not notified but done only when some of sequencer port attribute is changed. This is no ideal behavior. This patch adds the two new sequencer event types for notifying the UMP EP and FB changes via the announce port. The new event takes snd_seq_ev_ump_notify type data, which is compatible with snd_seq_addr (where the port number is replaced with the block number). The events are sent when the EP and FB info gets updated explicitly via ioctl, or the backend UMP receives the corresponding UMP messages. The sequencer protocol version is bumped to 1.0.5 along with it. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
2025-01-12ALSA: rawmidi: Bump protocol version to 2.0.5Takashi Iwai1-1/+1
Bump the protocol version to 2.0.5, as we extended the rawmidi ABI for the new tied_device info and the substream inactive flag. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250110155943.31578-4-tiwai@suse.de
2025-01-12ALSA: rawmidi: Show substream activity in info ioctlTakashi Iwai1-0/+1
The UMP legacy rawmidi may turn on/off the substream dynamically depending on the UMP Function Block information. So far, there was no direct way to know whether the substream is disabled (inactive) or not; at most one can take a look at the substream name string or try to open and get -ENODEV. This patch extends the rawmidi info ioctl to show the current inactive state of the given substream. When the selected substream is inactive, info flags field contains the new bit flag SNDRV_RAWMIDI_INFO_STREAM_INACTIVE. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
2025-01-12ALSA: rawmidi: Expose the tied device number in info ioctlTakashi Iwai1-1/+4
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently there is no way to know which device is involved in other side. This patch extends the rawmidi info ioctl to show the tied device number. As default it stores -1, indicating that no tied device. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
2025-01-10io_uring: expose read/write attribute capabilityAnuj Gupta1-0/+1
After commit 9a213d3b80c0, we can pass additional attributes along with read/write. However, userspace doesn't know that. Add a new feature flag IORING_FEAT_RW_ATTR, to notify the userspace that the kernel has this ability. Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Reviewed-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20241205062109.1788-1-anuj20.g@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10Merge tag 'ipsec-next-2025-01-09' of ↵David S. Miller5-2/+30
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next-2025-01-09 1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality. From Christian Hopps. 2) Support ESN context update to hardware for TX. From Jianbo Liu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-10Merge tag 'v6.13-rc6' into drm-nextDave Airlie3-29/+38
This backmerges Linux 6.13-rc6 this is need for the newer pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-01-09fs: add STATX_DIO_READ_ALIGNChristoph Hellwig1-1/+3
Add a separate dio read align field, as many out of place write file systems can easily do reads aligned to the device sector size, but require bigger alignment for writes. This is usually papered over by falling back to buffered I/O for smaller writes and doing read-modify-write cycles, but performance for this sucks, so applications benefit from knowing the actual write alignment. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250109083109.1441561-3-hch@lst.de Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-09fs: reformat the statx definitionChristoph Hellwig1-23/+72
The comments after the declaration are becoming rather unreadable with long enough comments. Move them into lines of their own. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250109083109.1441561-2-hch@lst.de Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-09netfilter: conntrack: add conntrack event timestampFlorian Westphal1-0/+1
Nadia Pinaeva writes: I am working on a tool that allows collecting network performance metrics by using conntrack events. Start time of a conntrack entry is used to evaluate seen_reply latency, therefore the sooner it is timestamped, the better the precision is. In particular, when using this tool to compare the performance of the same feature implemented using iptables/nftables/OVS it is crucial to have the entry timestamped earlier to see any difference. At this time, conntrack events can only get timestamped at recv time in userspace, so there can be some delay between the event being generated and the userspace process consuming the message. There is sys/net/netfilter/nf_conntrack_timestamp, which adds a 64bit timestamp (ns resolution) that records start and stop times, but its not suited for this either, start time is the 'hashtable insertion time', not 'conntrack allocation time'. There is concern that moving the start-time moment to conntrack allocation will add overhead in case of flooding, where conntrack entries are allocated and released right away without getting inserted into the hashtable. Also, even if this was changed it would not with events other than new (start time) and destroy (stop time). Pablo suggested to add new CTA_TIMESTAMP_EVENT, this adds this feature. The timestamp is recorded in case both events are requested and the sys/net/netfilter/nf_conntrack_timestamp toggle is enabled. Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com> Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-09netlink: add IPv6 anycast join/leave notificationsYuyang Huang1-1/+7
This change introduces a mechanism for notifying userspace applications about changes to IPv6 anycast addresses via netlink. It includes: * Addition and deletion of IPv6 anycast addresses are reported using RTM_NEWANYCAST and RTM_DELANYCAST. * A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these notifications. This enables user space applications(e.g. ip monitor) to efficiently track anycast addresses through netlink messages, improving metrics collection and system monitoring. It also unlocks the potential for advanced anycast management in user space, such as hardware offload control and fine grained network control. Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Yuyang Huang <yuyanghuang@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09Merge tag 'drm-xe-next-2025-01-07' of ↵Dave Airlie1-0/+7
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - OA new property: 'unblock after N reports' (Ashutosh) i915 display Changes: - UHBR rates for Thunderbolt (Kahola) Driver Changes: - IRQ related fixes and improvements (Ilia) - Revert some changes that break a mesa debug tool (John) - Fix migration issues (Nirmoy) - Enable GuC's WA_DUAL_QUEUE for newer platforms (Daniele) - Move shrink test out of xe_bo (Nirmoy) - SRIOV PF: Use correct function to check LMEM provisioning (Michal) - Fix a false-positive "Missing outer runtime PM protection" warning (Rodrigo) - Make GSCCS disabling message less alarming (Daniele) - Fix DG1 power gate sequence (Rodrigo) - Xe files fixes (Lucas) - Fix a potential TP_printk UAF (Thomas) - OA Fixes (Umesh) - Fix tlb invalidation when wedging (Lucas) - Documentation fix (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z31579j3V3XCPFaK@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-29 06:40:49 +0000