| Age | Commit message (Collapse) | Author | Lines |
|---|
|
The RK801 is a Power Management IC (PMIC) for multimedia
and handheld devices. It contains the following components:
- 4 BUCK
- 2 LDO
- 1 SWITCH
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Link: https://patch.msgid.link/20260112124351.17707-3-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
of_drm_find_and_get_bridge()
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done. Also switch to the drm_bridge::next_bridge pointer.
This needs to handle both cases: when of_drm_find_panel() succeeds and when
it fails.
In the 'else' case (i.e. when of_drm_find_panel() fails), just switch to
of_drm_find_and_get_bridge() to ensure the bridge is not freed while in use
in the function tail, when it is stored in dsi->bridge.next_bridge.
In the 'then' case (i.e. when of_drm_find_panel() succeeds),
devm_drm_panel_bridge_add() already increments the refcount using devres
which ties the bridge allocation lifetime to the device lifetime, so we
would not need to do anything. However to have the same behaviour in both
branches take an additional reference here, so that the bridge needs to be
put whichever branch is taken without more complicated logic. Ensure to
clear the bridge pointer however, to avoid calling drm_bridge_put() on an
ERR_PTR.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-12-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-2-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
drm_of_panel_bridge_remove() uses of_graph_get_remote_node() to get a
device_node but does not put the node reference.
Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function")
Cc: stable@vger.kernel.org # v4.15
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-1-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
WMI strings are encoded using UTF16-LE characters, forcing WMI drivers
to manually convert them to/from standard UTF8 strings. Add a two
helper functions for those tasks.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Windows WMI-ACPI driver likely uses wmilib [1] to interact with
the WMI service in userspace. Said library uses plain byte buffers
for exchanging data, so the WMI-ACPI driver has to convert between
those byte buffers and ACPI objects returned by the ACPI firmware.
The format of the byte buffer is publicly documented [2], and after
some reverse eingineering of the WMI-ACPI driver using a set of custom
ACPI tables, the following conversion rules have been discovered:
- ACPI integers are always converted into a uint32
- ACPI strings are converted into special WMI strings
- ACPI buffers are copied as-is
- ACPI packages are unpacked
Extend the ACPI-WMI driver to also perform this kind of marshalling
for WMI data blocks, methods and events. Doing so gives us a number
of benefits:
- WMI drivers are not restricted to a fixed set of supported ACPI data
types anymore, see dell-wmi-aio (integer vs buffer) and
hp-wmi-sensors (string vs buffer)
- correct marshalling of WMI strings when data blocks are marked
as requiring ACPI strings instead of ACPI buffers
- development of WMI drivers without having to understand ACPI
This eventually should result in better compatibility with some
ACPI firmware implementations and in simpler WMI drivers. There are
however some differences between the original Windows driver and
the ACPI-WMI driver when it comes to ACPI object conversions:
- the Windows driver copies internal _ACPI_METHOD_ARGUMENT_V1 data
structures into the output buffer when encountering nested ACPI
packages. This is very likely an error inside the driver itself, so
we do not support nested ACPI packages.
- when converting WMI strings (UTF-16LE) into ACPI strings (ASCII),
the Windows driver replaces non-ascii characters (ä -> a, & -> ?)
instead of returning an error. This behavior is not documented
anywhere and might lead to severe errors in some cases (like
setting BIOS passwords over WMI), so we simply return an error.
As the current bus-based WMI API is based on ACPI buffers, a new
API is necessary. The legacy GUID-based WMI API is not extended to
support marshalling, as WMI drivers using said API are expected to
move to the bus-based WMI API in the future.
[1] https://learn.microsoft.com/de-de/windows-hardware/drivers/ddi/wmilib/
[2] https://learn.microsoft.com/en-us/windows-hardware/drivers/kernel/
driver-defined-wmi-data-items
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260116204116.4030-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Include linux/types.h for u8.
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://patch.msgid.link/20260107152704.2290146-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this would not be done, then the netkit device would hold a reference
on the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[ 345.345709] mlx5_core 0000:0a:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 345.357524] mlx5_core 0000:0a:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 350.995989] mlx5_core 0000:0a:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 351.574396] mlx5_core 0000:0a:00.0: E-Switch: cleanup
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-12-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a single device mode for netkit instead of netkit pairs. The primary
target for the paired devices is to connect network namespaces, of course,
and support has been implemented in projects like Cilium [0]. For the rxq
leasing the plan is to support two main scenarios related to single device
mode:
* For the use-case of io_uring zero-copy, the control plane can either
set up a netkit pair where the peer device can perform rxq leasing which
is then tied to the lifetime of the peer device, or the control plane
can use a regular netkit pair to connect the hostns to a Pod/container
and dynamically add/remove rxq leasing through a single device without
having to interrupt the device pair. In the case of io_uring, the memory
pool is used as skb non-linear pages, and thus the skb will go its way
through the regular stack into netkit. Things like the netkit policy when
no BPF is attached or skb scrubbing etc apply as-is in case the paired
devices are used, or if the backend memory is tied to the single device
and traffic goes through a paired device.
* For the use-case of AF_XDP, the control plane needs to use netkit in the
single device mode. The single device mode currently enforces only a
pass policy when no BPF is attached, and does not yet support BPF link
attachments for AF_XDP. skbs sent to that device get dropped at the
moment. Given AF_XDP operates at a lower layer of the stack tying this
to the netkit pair did not make sense. In future, the plan is to allow
BPF at the XDP layer which can: i) process traffic coming from the AF_XDP
application (e.g. QEMU with AF_XDP backend) to filter egress traffic or
to push selected egress traffic up to the single netkit device to the
local stack (e.g. DHCP requests), and ii) vice-versa skbs sent to the
single netkit into the AF_XDP application (e.g. DHCP replies). Also,
the control-plane can dynamically manage rxq leasing for the single
netkit device without having to interrupt (e.g. down/up cycle) the main
netkit pair for the Pod which has traffic going in and out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jordan Rife <jordan@jrife.io>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://docs.cilium.io/en/stable/operations/performance/tuning/#netkit-device-mode [0]
Link: https://patch.msgid.link/20260115082603.219152-10-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a process in a container wants to setup a memory provider, it will
use the virtual netdev and a leased rxq, and call net_mp_{open,close}_rxq
to try and restart the queue. At this point, proxy the queue restart on
the real rxq in the physical netdev.
For memory providers (io_uring zero-copy rx and devmem), it causes the
real rxq in the physical netdev to be filled from a memory provider that
has DMA mapped memory from a process within a container.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260115082603.219152-6-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Populate nested lease info to the queue-get response that returns the
ifindex, queue id with type and optionally netns id if the device
resides in a different netns.
Example with ynl client:
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp/id:24 qdisc mq state UP group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
inet6 fe80::eaeb:d3ff:fea3:43f6/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ethtool -i enp10s0f0np0
driver: mlx5_core
[...]
# ./pyynl/cli.py \
--spec ~/netlink/specs/netdev.yaml \
--do queue-get \
--json '{"ifindex": 4, "id": 15, "type": "rx"}'
{'id': 15,
'ifindex': 4,
'lease': {'ifindex': 8, 'netns-id': 0, 'queue': {'id': 1, 'type': 'rx'}},
'napi-id': 8227,
'type': 'rx',
'xsk': {}}
# ip netns list
foo (id: 0)
# ip netns exec foo ip a
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
inet6 fe80::200:ff:fe00:0/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ip netns exec foo ethtool -i nk
driver: netkit
[...]
# ip netns exec foo ls /sys/class/net/nk/queues/
rx-0 rx-1 tx-0
# ip netns exec foo ./pyynl/cli.py \
--spec ~/netlink/specs/netdev.yaml \
--do queue-get \
--json '{"ifindex": 8, "id": 1, "type": "rx"}'
{'id': 1, 'ifindex': 8, 'type': 'rx'}
Note that the caller of netdev_nl_queue_fill_one() holds the netdevice
lock. For the queue-get we do not lock both devices. When queues get
{un,}leased, both devices are locked, thus if __netif_get_rx_queue_peer()
returns true, the peer pointer points to a valid device. The netns-id
is fetched via peernet2id_alloc() similarly as done in OVS.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260115082603.219152-4-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement netdev_nl_queue_create_doit which creates a new rx queue in a
virtual netdev and then leases it to a rx queue in a physical netdev.
Example with ynl client:
# ./pyynl/cli.py \
--spec ~/netlink/specs/netdev.yaml \
--do queue-create \
--json '{"ifindex": 8, "type": "rx", "lease": {"ifindex": 4, "queue": {"type": "rx", "id": 15}}}'
{'id': 1}
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-3-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queue
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is currently only intended for
dumping as part of the queue-get operation. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the AP has an advertised TID to Link Mapping (TTLM) it shall
include the element in the association response. As such, when this
element is present it needs to be used for the currently dormant links.
See Draft P802.11REVmf_D1.0 section 35.3.7.2.3 ("Negotiation of TTLM")
for the details. The flag is also not usable in case userspace wants to
specify a negotiated TTLM during association.
Note that for the link reconfiguration case, mac80211 did not use the
information. Draft P802.11REVmf_D1.0 states in section 35.3.6.4 ("Link
reconfiguration to the setup links) that we "shall operate with all the
TIDs mapped to the newly added links ..."
All this means that the flag is not needed. The implementation should
parse the information from the association response.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260118093904.754e057896a5.Ifd06f5ef839a93bfd54d0593dc932870f95f3242@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fast commits only log operations that have dedicated replay support.
EXT4_IOC_MOVE_EXT swaps extents between regular files and may copy
data, rewriting the affected inodes' block mapping layout without
going through the fast commit tracking paths.
In practice these operations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall
semantics harder to reason about and risks replay gaps if new call
sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible for the
journal transactions used by move_extent_per_page() when
EXT4_IOC_MOVE_EXT runs.
This forces those transactions to fall back to a full commit,
ensuring that these multi-inode extent swaps are captured by the
normal journal rather than partially encoded in fast commit TLVs.
This change should not affect common workloads but makes online
defragmentation safer and easier to reason about under fast commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc_move.img bs=1M count=0 seek=256
mkfs.ext4 -O fast_commit -F /root/fc_move.img
mkdir -p /mnt/fc_move && mount -t ext4 -o loop \
/root/fc_move.img /mnt/fc_move
2. Created two files, ran EXT4_IOC_MOVE_EXT via e4defrag, and checked
the ineligible reason statistics:
fallocate -l 64M /mnt/fc_move/file1
cp /mnt/fc_move/file1 /mnt/fc_move/file2
e4defrag /mnt/fc_move/file1
cat /proc/fs/ext4/loop0/fc_info
shows "Move extents": > 0 and fc stats ineligible > 0.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-4-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commits only log operations that have dedicated replay support.
Enabling fs-verity builds a Merkle tree and updates inode and orphan
state in ways that are not described by the fast commit replay tags.
In practice these operations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall
semantics harder to reason about and risks replay gaps if new call
sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible when
ext4_end_enable_verity() starts its journal transaction.
This forces that transaction to fall back to a full commit, ensuring
that the fs-verity enable changes are captured by the normal journal
rather than partially encoded in fast commit TLVs.
This change should not affect common workloads but makes fs-verity
enable safer and easier to reason about under fast commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc_verity.img bs=1M count=0 seek=128
mkfs.ext4 -O fast_commit,verity -F /root/fc_verity.img
mkdir -p /mnt/fc_verity && mount -t ext4 -o loop /root/fc_verity.img /mnt/fc_verity
2. Enabled fs-verity on a file and verified reason accounting:
echo "data" > /mnt/fc_verity/verityfile
/root/enable_verity /mnt/fc_verity/verityfile
sync
tail -n 1 /proc/fs/ext4/loop0/fc_info
"fs-verity enable": 1
3. Enabled fs-verity on a second file, fsynced it, and checked that the
ineligible commit counter is updated too:
echo "data2" > /mnt/fc_verity/verityfile2
/root/enable_verity /mnt/fc_verity/verityfile2
/root/fsync_file /mnt/fc_verity/verityfile2
sync
/proc/fs/ext4/loop0/fc_info shows "fs-verity enable" incremented and
fc stats ineligible increased accordingly.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-3-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commits only log operations that have dedicated replay support.
Inode format migration (indirect<->extent layout changes via
EXT4_IOC_MIGRATE or toggling EXT4_EXTENTS_FL) rewrites the block mapping
representation without going through the fast commit tracking paths.
In practice these migrations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall semantics
harder to reason about and risks replay gaps if new call sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible when
ext4_ext_migrate() or ext4_ind_migrate() start their journal transactions.
This forces those transactions to fall back to a full commit, ensuring
that the entire inode layout change is captured by the normal journal
rather than partially encoded in fast commit TLVs. This change should
not affect common workloads but makes format migrations safer and easier
to reason about under fast commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc.img bs=1M count=0 seek=128
mkfs.ext4 -O fast_commit -F /root/fc.img
mkdir -p /mnt/fc && mount -t ext4 -o loop /root/fc.img /mnt/fc
2. Created a test file and toggled the extents flag to exercise both
ext4_ind_migrate() and ext4_ext_migrate():
touch /mnt/fc/migtest
chattr -e /mnt/fc/migtest
chattr +e /mnt/fc/migtest
3. Verified fast-commit ineligible statistics:
tail -n 1 /proc/fs/ext4/loop0/fc_info
"Inode format migration": 2
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-2-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Above the while() loop in wait_sb_inodes(), we document that we must wait
for all pages under writeback for data integrity. Consequently, if a
mapping, like fuse, traditionally does not have data integrity semantics,
there is no need to wait at all; we can simply skip these inodes.
This restores fuse back to prior behavior where syncs are no-ops. This
fixes a user regression where if a system is running a faulty fuse server
that does not reply to issued write requests, this causes wait_sb_inodes()
to wait forever.
Link: https://lkml.kernel.org/r/20260105211737.4105620-2-joannelkoong@gmail.com
Fixes: 0c58a97f919c ("fuse: remove tmp folio for writebacks and internal rb tree")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Reported-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Tested-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Bernd Schubert <bschubert@ddn.com>
Cc: Bonaccorso Salvatore <carnil@debian.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both init_mm and efi_mm static definitions need to make room for the 2
mm_cid cpumasks.
This fixes possible out-of-bounds accesses to init_mm and efi_mm.
Add a space between # and define for the mm_alloc_cid() definition to make
it consistent with the coding style used in the rest of this header file.
Link: https://lkml.kernel.org/r/20251224173358.647691-4-mathieu.desnoyers@efficios.com
Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Liam R . Howlett" <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Martin Liu <liumartin@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The cpu_bitmap flexible array now contains more than just the cpu_bitmap.
In preparation for changing the static mm_struct definitions to cover for
the additional space required, change the cpu_bitmap type from "unsigned
long" to "char", require an unsigned long alignment of the flexible array,
and rename the field from "cpu_bitmap" to "flexible_array".
Introduce the MM_STRUCT_FLEXIBLE_ARRAY_INIT macro to statically initialize
the flexible array. This covers the init_mm and efi_mm static
definitions.
This is a preparation step for fixing the missing mm_cid size for static
mm_struct definitions.
Link: https://lkml.kernel.org/r/20251224173358.647691-3-mathieu.desnoyers@efficios.com
Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Liam R . Howlett" <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Martin Liu <liumartin@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
USB4 v2 link used in peer-to-peer networking is symmetric 80Gbps so in
order to support reading this link speed, add support for it to ethtool.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260115115646.328898-3-mika.westerberg@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, userspace can retrieve the DPLL working mode but cannot
configure it. This prevents changing the device operation, such as
switching from manual to automatic mode and vice versa.
Add a new callback .mode_set() to struct dpll_device_ops. Extend
the netlink policy and device-set command handling to process
the DPLL_A_MODE attribute. Update the netlink YAML specification
to include the mode attribute in the device-set operation.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260114122726.120303-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the DPLL subsystem assumes that the only supported mode is
the one currently active on the device. When dpll_msg_add_mode_supported()
is called, it relies on ops->mode_get() and reports that single mode
to userspace. This prevents users from discovering other modes the device
might be capable of.
Add a new callback .supported_modes_get() to struct dpll_device_ops. This
allows drivers to populate a bitmap indicating all modes supported by
the hardware.
Update dpll_msg_add_mode_supported() to utilize this new callback:
* if ops->supported_modes_get is defined, use it to retrieve the full
bitmap of supported modes.
* if not defined, fall back to the existing behavior: retrieve
the current mode via ops->mode_get and set the corresponding bit
in the bitmap.
Finally, iterate over the bitmap and add a DPLL_A_MODE_SUPPORTED netlink
attribute for every set bit, accurately reporting the device's capabilities
to userspace.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260114122726.120303-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing READ_ONCE() when reading sysctl values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a missing READ_ONCE(), and add const qualifiers to the two parameters.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use READ_ONCE() to read sysctl values in ip6_make_flowlabel()
and ip6_make_flowlabel()
Add a const qualifier to 'struct net' parameters.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group together following struct netns_sysctl_ipv6 fields:
- flowlabel_consistency
- auto_flowlabels
- flowlabel_state_ranges
After this patch, ip6_make_flowlabel() uses a single cache line to fetch
auto_flowlabels and flowlabel_state_ranges (instead of two before the patch).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* Reuse common phys_vec, phase out dma_buf_phys_vec
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
After commit fcf463b92a08 ("types: move phys_vec definition to common header"),
we can use the shared phys_vec type instead of the DMABUF‑specific
dma_buf_phys_vec, which duplicated the same structure and semantics.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20260107-convert-to-pvec-v1-1-6e3ab8079708@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add stubs to address CONFIG_MEMORY_FAILURE disabled.
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20260115202849.2921-2-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Commit bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats
in sysfs") added dmabuf statistics to sysfs in 2021 under
CONFIG_DMABUF_SYSFS_STATS. After being used in production, performance
problems were discovered leading to its deprecation in 2022 in commit
e0a9f1fe206a ("dma-buf: deprecate DMABUF_SYSFS_STATS"). Some of the
problems with this interface were discussed in my LPC 2025 talk. [1][2]
Android was probably the last user of the interface, which has since
been migrated to use the dmabuf BPF iterator [3] to obtain the same
information more cheaply. As promised in that series, now that the
longterm stable 6.18 kernel has been released let's remove the sysfs
dmabuf statistics from the kernel.
[1] https://www.youtube.com/watch?v=D83qygudq9c
[2] https://lpc.events/event/19/contributions/2118/
[3] https://lore.kernel.org/all/20250522230429.941193-1-tjmercier@google.com/
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116190517.3268458-1-tjmercier@google.com
|
|
Add a parameter to enable dma-buf heaps allocation accounting using
cgroup for heaps that implement it. It is disabled by default as doing
so incurs caveats based on how memcg currently accounts for shared
buffers.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116-dmabuf-heap-system-memcg-v3-1-ecc6b62cc446@redhat.com
|
|
This patch extends the cmdq_pkt_write API to support SoCs that do not
have subsys ID mapping by introducing new register write APIs:
- cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() replace
cmdq_pkt_write()
- cmdq_pkt_write_mask_pa() and cmdq_pkt_write_mask_subsys() replace
cmdq_pkt_write_mask()
To ensure consistent function pointer interfaces, both
cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() provide subsys and
pa_base parameters. This unifies how register writes are invoked,
regardless of whether subsys ID is supported by the device.
All GCEs support writing registers by PA (with mask) without subsys,
but this requires extra GCE instructions to convert the PA into a GCE
readable format, reducing performance compared to using subsys directly.
Therefore, subsys is preferred for register writes when available.
API documentation and function pointer declarations in cmdq_client_reg
have been updated. The original write APIs will be removed after all
CMDQ users transition to the new interfaces.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
support
When GCE executes instructions, it typically locates the corresponding
hardware register using the subsys ID. For hardware that does not
support subsys ID, the subsys ID is set to an invalid value, and the
physical address must be used to generate GCE instructions.
The main advantage of using subsys ID is to reduce the number of
instructions. Without subsys ID, an additional `ASSIGN` instruction
is needed to assign the high bytes of the physical address, which can
impact performance if too many instructions are required. However, if
the hardware does not support subsys ID, using the physical address
is the only option to achieve the same functionality.
This commit adds a pa_base parsing flow to the cmdq_client_reg structure
to handle hardware without subsys ID support.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The GCE in MT8196 is placed in MMINFRA and requires all addresses
in GCE instructions for DRAM transactions to be IOVA.
Due to MMIO, if the GCE needs to access a hardware register at
0x1000_0000, but the SMMU is also mapping a DRAM block at 0x1000_0000,
the MMINFRA will not know whether to write to the hardware register or
the DRAM.
To solve this, MMINFRA treats addresses greater than 2G as data paths
and those less than 2G as config paths because the DRAM start address
is currently at 2G (0x8000_0000). On the data path, MMINFRA remaps
DRAM addresses by subtracting 2G, allowing SMMU to map DRAM addresses
less than 2G.
For example, if the DRAM start address 0x8000_0000 is mapped to
IOVA=0x0, when GCE accesses IOVA=0x0, it must add a 2G offset to
the address in the GCE instruction. MMINFRA will then see it as a
data path (IOVA >= 2G) and subtract 2G, allowing GCE to access IOVA=0x0.
Since the MMINFRA remap subtracting 2G is done in hardware and cannot
be configured by software, the address of DRAM in GCE instruction must
always add 2G to ensure proper access. After that, the shift functions
do more than just shift addresses, so the APIs were renamed to
cmdq_convert_gce_addr() and cmdq_revert_gce_addr().
This 2G adjustment is referred to as mminfra_offset in the CMDQ driver.
CMDQ helper can get the mminfra_offset from the cmdq_mbox_priv of
cmdq_pkt and add the mminfra_offset to the DRAM address in GCE
instructions.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the cmdq_mbox_priv structure to store the private data of GCE,
such as the shift bits of the physical address. Then, include the
cmdq_mbox_priv structure within the cmdq_pkt structure.
This allows CMDQ users to utilize the private data in cmdq_pkt to
generate GCE instructions when needed. Additionally, having
cmdq_mbox_priv makes it easier to expand and reference other GCE
private data in the future.
Add cmdq_get_mbox_priv() for CMDQ users to get all the private data
into the cmdq_mbox_priv of the cmdq_pkt.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
|
|
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
We already require both hdmi_write_infoframe and hdmi_clear_infoframe
for bridges implementing DRM_BRIDGE_OP_HDMI. It makes sense to require
the clear_infoframes callback for HDMI connectors utilizing
drmm_connector_hdmi_init().
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-4-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After NAN was started, cluster id updates from the user space should not
happen, since the device already started a cluster with the
previousely provided id.
Since NL80211_CMD_CHANGE_NAN_CONFIG requires to set the full NAN
configuration, we can't require that NL80211_NAN_CONF_CLUSTER_ID won't
be included in this command, and keeping the last confgiured value just
to be able to compare it against the new one seems a bit overkill.
Therefore, just ignore cluster id in this command and clarify the
documentation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107142229.fb55e5853269.I10d18c8f69d98b28916596d6da4207c15ea4abb5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
pinctrl_bind_pins() is only used by driver core (as it should). Move it
out of the public header into base.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"This fixes TCP handling, tests, documentation, non-audit elided code,
and minor cosmetic changes"
* tag 'landlock-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Clarify documentation for the IOCTL access right
selftests/landlock: Properly close a file descriptor
landlock: Improve the comment for domain_is_scoped
selftests/landlock: Use scoped_base_variants.h for ptrace_test
selftests/landlock: Fix missing semicolon
selftests/landlock: Fix typo in fs_test
landlock: Optimize stack usage when !CONFIG_AUDIT
landlock: Fix spelling
landlock: Clean up hook_ptrace_access_check()
landlock: Improve erratum documentation
landlock: Remove useless include
landlock: Fix wrong type usage
selftests/landlock: NULL-terminate unix pathname addresses
selftests/landlock: Remove invalid unix socket bind()
selftests/landlock: Add missing connect(minimal AF_UNSPEC) test
selftests/landlock: Fix TCP bind(AF_UNSPEC) test case
landlock: Fix TCP handling of short AF_UNSPEC addresses
landlock: Fix formatting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
- Fix an inconsistency in structure size on 32-bit platforms caused by
padding differences for the new EXT4_IOC_[GS]ET_TUNE_SB_PARAM ioctls
- Fix a buffer leak on the error path when dropping the refcount an
xattr value stored in an inode
- Fix missing locking on the error path for the file defragmentation
ioctl leading to a BUG
* tag 'ext4_for_linus-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix iloc.bh leak in ext4_xattr_inode_update_ref
ext4: add missing down_write_data_sem in mext_move_extent().
ext4: fix ext4_tune_sb_params padding
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.20-2026-01-16:
amdgpu:
- SR-IOV fixes
- Rework SMU mailbox handling
- Drop MMIO_REMAP domain
- UserQ fixes
- MES cleanups
- Panel Replay updates
- HDMI fixes
- Backlight fixes
- SMU 14.x fixes
- SMU 15 updates
amdkfd:
- Fix a memory leak
- Fixes for systems with non-4K pages
- LDS/Scratch cleanup
- MES process eviction fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260116202609.23107-1-alexander.deucher@amd.com
|
|
The GCE in MT8196 is placed in MMINFRA and requires all addresses
in GCE instructions for DRAM transactions to be IOVA.
Due to MMIO, if the GCE needs to access a hardware register at
0x1000_0000, but the SMMU is also mapping a DRAM block at 0x1000_0000,
the MMINFRA will not know whether to write to the hardware register or
the DRAM.
To solve this, MMINFRA treats addresses greater than 2G as data paths
and those less than 2G as config paths because the DRAM start address
is currently at 2G (0x8000_0000). On the data path, MMINFRA remaps
DRAM addresses by subtracting 2G, allowing SMMU to map DRAM addresses
less than 2G.
For example, if the DRAM start address 0x8000_0000 is mapped to
IOVA=0x0, when GCE accesses IOVA=0x0, it must add a 2G offset to
the address in the GCE instruction. MMINFRA will then see it as a
data path (IOVA >= 2G) and subtract 2G, allowing GCE to access IOVA=0x0.
Since the MMINFRA remap subtracting 2G is done in hardware and cannot
be configured by software, the address of DRAM in GCE instruction must
always add 2G to ensure proper access. After that, the shift functions
do more than just shift addresses, so the APIs were renamed to
cmdq_convert_gce_addr() and cmdq_revert_gce_addr().
This 2G adjustment is referred to as mminfra_offset in the CMDQ driver.
CMDQ helper can get the mminfra_offset from the cmdq_mbox_priv of
cmdq_pkt and add the mminfra_offset to the DRAM address in GCE
instructions.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add the cmdq_mbox_priv structure to store the private data of GCE,
such as the shift bits of the physical address. Then, include the
cmdq_mbox_priv structure within the cmdq_pkt structure.
This allows CMDQ users to utilize the private data in cmdq_pkt to
generate GCE instructions when needed. Additionally, having
cmdq_mbox_priv makes it easier to expand and reference other GCE
private data in the future.
Add cmdq_get_mbox_priv() for CMDQ users to get all the private data
into the cmdq_mbox_priv of the cmdq_pkt.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This reverts commit 5378bdf6a611a32500fccf13d14156f219bb0c85.
Commit 5378bdf6a611 ("mailbox/pcc: support mailbox management of the shared buffer")
attempted to introduce generic helpers for managing the PCC shared memory,
but it largely duplicates functionality already provided by the mailbox
core and leaves gaps:
1. TX preparation: The mailbox framework already supports this via
->tx_prepare callback for mailbox clients. The patch adds
pcc_write_to_buffer() and expects clients to toggle pchan->chan.manage_writes,
but no drivers set manage_writes, so pcc_write_to_buffer() has no users.
2. RX handling: Data reception is already delivered through
mbox_chan_received_data() and client ->rx_callback. The patch adds an
optional pchan->chan.rx_alloc, which again has no users and duplicates
the existing path.
3. Completion handling: While adding last_tx_done is directionally useful,
the implementation only covers Type 3/4 and fails to handle the absence
of a command_complete register, so it is incomplete for other types.
Given the duplication and incomplete coverage, revert this change. Any new
requirements should be addressed in focused follow-ups rather than bundling
multiple behavioral changes together.
Fixes: 5378bdf6a611 ("mailbox/pcc: support mailbox management of the shared buffer")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
