| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Provide a helper to fetch jinode dirty ranges in bytes. This lets
filesystem callbacks avoid depending on the internal representation,
preparing for a later conversion to page units.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260306085643.465275-2-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
Add device model for DMSINTC interrupt controller, implement basic
create/destroy/set_attr interfaces, and register device model to kvm
device table.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Introduce a common GPIO setup helper function, so that we can clean up
the open code found in many codec drivers later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260409093826.1317626-3-tiwai@suse.de
|
|
We used snd_hda_codec_read() for the verb write when a synchronization
is needed after the write, e.g. for the power state toggle or such
cases. It works in principle, but it looks rather confusing and too
hackish.
For improving the code readability, introduce a new helper function,
snd_hda_codec_write_sync(), which is another variant of
snd_hda_codec_write(), and replace the existing snd_hda_codec_read()
calls with this one.
No behavior change but just the code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260409093826.1317626-2-tiwai@suse.de
|
|
Introduce the capability bit icm_mng_function_id_mode to indicate that
the device firmware uses vhca_id instead of function_id as the effective
identifier for the firmware commands MANAGE_PAGES, QUERY_PAGES, and page
request event.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The MLX5_PF enum value in mlx5_func_type is used to track firmware
page allocations for the page manager function itself, which is either
the ECPF on SmartNIC systems or the host PF when there is no ECPF.
Rename it to MLX5_SELF to accurately reflect that this counter tracks
pages allocated by the manager for its own use, regardless of whether
it is a PF or ECPF.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull 7.0-devel branch for further development of HD-audio codec quirks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Allow filtering the resource dump to device-level or port-level
resources using the 'scope' option.
Example - dump only device-level resources:
$ devlink resource show scope dev
pci/0000:03:00.0:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
Example - dump only port-level resources:
$ devlink resource show scope port
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196609:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196708:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196709:
name max_SFs size 128 unit entry dpipe_tables none
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current devlink resource infrastructure supports only device-level
resources. Some hardware resources are associated with specific ports
rather than the entire device, and today we have no way to show resource
per-port.
Add support for registering resources at the port level.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the resource functions take devlink pointer as parameter
and take the resource list from there.
Allow resource functions to work with other resource lists that will
be added in next patches and not only with the devlink's resource list.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no reason at all to export these data types to the global
include directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pretty self-explanatory, nobody needs these.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This has accumulated some fields which are no longer parsed by the core
or set by any driver. Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is not used anywhere in the kernel.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current MPTCP-level RTT estimator has several issues. On high speed
links, the MPTCP-level receive buffer auto-tuning happens with a
frequency well above the TCP-level's one. That in turn can cause
excessive/unneeded receive buffer increase.
On such links, the initial rtt_us value is considerably higher than the
actual delay, and the current mptcp_rcv_space_adjust() updates
msk->rcvq_space.rtt_us with a period equal to the such field previous
value. If the initial rtt_us is 40ms, its first update will happen after
40ms, even if the subflows see actual RTT orders of magnitude lower.
Additionally:
- setting the msk RTT to the maximum among all the subflows RTTs makes
DRS constantly overshooting the rcvbuf size when a subflow has
considerable higher latency than the other(s).
- during unidirectional bulk transfers with multiple active subflows,
the TCP-level RTT estimator occasionally sees considerably higher
value than the real link delay, i.e. when the packet scheduler reacts
to an incoming ACK on given subflow pushing data on a different
subflow.
- currently inactive but still open subflows (i.e. switched to backup
mode) are always considered when computing the msk-level RTT.
Address the all the issues above with a more accurate RTT estimation
strategy: the MPTCP-level RTT is set to the minimum of all the subflows
actually feeding data into the MPTCP receive buffer, using a small
sliding window.
While at it, also use EWMA to compute the msk-level scaling_ratio, to
that MPTCP can avoid traversing the subflow list is
mptcp_rcv_space_adjust().
Use some care to avoid updating msk and ssk level fields too often.
Fixes: a6b118febbab ("mptcp: add receive buffer auto-tuning")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260407-net-next-mptcp-reduce-rbuf-v2-1-0d1d135bf6f6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipvlan and macvlan use queues to process broadcast/multicast packets
from a work queue.
Under attack these queues can drop packets.
Add MACVLAN_BROADCAST_BACKLOG drop_reason for macvlan broadcast queue.
Add IPVLAN_MULTICAST_BACKLOG drop_reason for ipvlan multicast queue.
Use different reasons as some deployments use both ipvlan and macvlan.
Also change ipvlan_rcv_frame() to use SKB_DROP_REASON_DEV_READY
when the device is not UP.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407150710.1640747-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
codel_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_codel_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
No change in kernel size:
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 0/0 grow/shrink: 1/1 up/down: 3/-1 (2)
Function old new delta
codel_qdisc_dequeue 2462 2465 +3
codel_dump_stats 250 249 -1
Total: Before=29739919, After=29739921, chg +0.00%
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407143053.1570620-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 2884bf72fb8f ("net: bonding: fix use-after-free in
bond_xmit_broadcast()"), bond_is_last_slave() was only used in
bond_xmit_broadcast(). After the recent fix replaced that usage with
a simple index comparison, bond_is_last_slave() has no remaining
callers. bond_is_first_slave() likewise has no callers.
Remove both unused macros.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260404220412.444753-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
I only included crash fixes, as we're closer to a release, rest will
be handled via -next.
1) Fix a NULL pointer dereference in ip_vs_add_service error path, from
Weiming Shi, bug added in 6.2 development cycle.
2) Don't leak kernel data bytes from allocator to userspace: nfnetlink_log
needs to init the trailing NLMSG_DONE terminator. From Xiang Mei.
3) xt_multiport match lacks range validation, bogus userspace request will
cause out-of-bounds read. From Ren Wei.
4) ip6t_eui64 match must reject packets with invalid mac header before
calling eth_hdr. Make existing check unconditional. From Zhengchuan
Liang.
5) nft_ct timeout policies are free'd via kfree() while they may still
be reachable by other cpus that process a conntrack object that
uses such a timeout policy. Existing reaping of entries is not
sufficient because it doesn't wait for a grace period. Use kfree_rcu().
From Tuan Do.
6/7) Make nfnetlink_queue hash table per queue. As-is we can hit a page
fault in case underlying page of removed element was free'd. Per-queue
hash prevents parallel lookups. This comes with a test case that
demonstrates the bug, from Fernando Fernandez Mancera.
* tag 'nf-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: nft_queue.sh: add a parallel stress test
netfilter: nfnetlink_queue: make hash table per queue
netfilter: nft_ct: fix use-after-free in timeout object destroy
netfilter: ip6t_eui64: reject invalid MAC header for all packets
netfilter: xt_multiport: validate range encoding in checkentry
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
ipvs: fix NULL deref in ip_vs_add_service error path
====================
Link: https://patch.msgid.link/20260408163512.30537-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Peers may only send immediate acks for every 2 UDP packets received.
When sending a jumbogram, it is important to check that there is
sufficient window space to send another same sized jumbogram following
the current one, and request an ack if there isn't. Failure to do so may
cause the call to stall waiting for an ack until the resend timer fires.
Where jumbograms are in use this causes a very significant drop in
performance.
Fixes: fe24a5494390 ("rxrpc: Send jumbo DATA packets")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-10-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use.
Fixes: 5800b1cf3fd8 ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com [1]
Link: https://patch.msgid.link/20260408121252.2249051-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs.
Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move find_linfo() as bpf_find_linfo() into core.c to allow for its use
in the verifier in subsequent patches.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extract bpf_get_linfo_file_line as its own function so that the logic to
obtain the file, line, and line number for a given program can be shared
in subsequent patches.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In hfsplus_init_header_node() when node_count > 63488
(header bitmap capacity), the code calculates map_nodes,
subtracts them from free_nodes, and marks their positions
used in the bitmap. However, it doesn't write the actual
map node structure (type, record offsets, bitmap) for
those physical positions, only node 0 is written.
This patch reworks hfsplus_create_attributes_file()
logic by introducing a specialized method of
hfsplus_init_map_node() and writing the allocated
map b-tree's nodes by means of
hfsplus_write_attributes_file_node() method.
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260403230556.614171-5-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- handling of new keycodes for contextual AI usages (Akshai Murari)
- fix for UAF in hid-roccat (Benoît Sevens)
- deduplication of error logging in amd_sfh (Maximilian Pezzullo)
- various device-specific quirks and device ID additions (Even Xu, Lode
Willems, Leo Vriska)
* tag 'hid-for-linus-2026040801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Input: add keycodes for contextual AI usages (HUTRR119)
HID: Kysona: Add support for VXE Dragonfly R1 Pro
HID: amd_sfh: don't log error when device discovery fails with -EOPNOTSUPP
HID: quirks: add HID_QUIRK_ALWAYS_POLL for 8BitDo Pro 3
HID: roccat: fix use-after-free in roccat_report_event
HID: Intel-thc-hid: Intel-quickspi: Add NVL Device IDs
HID: Intel-thc-hid: Intel-quicki2c: Add NVL Device IDs
|
|
Bugzilla 217447 points out that ftrace bitmask fields still use the
legacy dynamic-array format, which makes trace consumers treat them
as unsigned long arrays instead of bitmaps.
This is visible in the ipi events today: ipi_send_cpumask already
reports its CPU mask as '__data_loc cpumask_t', but ipi_raise still
exposes target_cpus as '__data_loc unsigned long[]'.
Switch ipi_raise to __cpumask() and the matching helpers so its
tracefs format matches the existing cpumask representation used by
the other ipi event. The underlying storage size stays the same, but
trace data consumers can now recognize the field as a cpumask
directly.
Link: https://patch.msgid.link/20260406162434.40767-1-create0818@163.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217447
Signed-off-by: CaoRuichuang <create0818@163.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure that all interrupt handlers are unregistered before the parent
regmap_irq is unregistered.
sdca_irq_cleanup() was only called from the component_remove(). If the
module was loaded and removed without ever being component probed the
FDL interrupts would not be unregistered and this would hit a WARN
when devm called regmap_del_irq_chip() during the removal of the
parent IRQ.
Fixes: 4e53116437e9 ("ASoC: SDCA: Fix errors in IRQ cleanup")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260408093835.2881486-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Biju <biju.das.au@gmail.com> says:
This patch series adds binding and driver support for RSPI IP found on the
RZ/G3L SoC. The RSPI is compatible with RZ/V2H RSPI, but has 2 clocks
compared to 3 on RZ/V2H.
Link: https://patch.msgid.link/20260408085418.18770-1-biju.das.jz@bp.renesas.com
|
|
'make htmldocs' complains that dma_fence_unlock_irqrestore() is missing
a description of its @flags parameter. The description is there but it is
missing a ':' sign. Add that and correct the possessive form of "its".
WARNING: ../include/linux/dma-fence.h:414 function parameter 'flags' not described in 'dma_fence_unlock_irqrestore'
Fixes: 3e5067931b5d ("dma-buf: abstract fence locking v2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260407043649.2015894-1-rdunlap@infradead.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure.
Cc: Scott Mitchell <scott.k.mitch1@gmail.com>
Fixes: e19079adcd26 ("netfilter: nfnetlink_queue: optimize verdict lookup with hash table")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
* kvm-arm64/vgic-fixes-7.1:
: .
: FIrst pass at fixing a number of vgic-v5 bugs that were found
: after the merge of the initial series.
: .
KVM: arm64: Advertise ID_AA64PFR2_EL1.GCIE
KVM: arm64: vgic-v5: Fold PPI state for all exposed PPIs
KVM: arm64: set_id_regs: Allow GICv3 support to be set at runtime
KVM: arm64: Don't advertises GICv3 in ID_PFR1_EL1 if AArch32 isn't supported
KVM: arm64: Correctly plumb ID_AA64PFR2_EL1 into pkvm idreg handling
KVM: arm64: Move GICv5 timer PPI validation into timer_irqs_are_valid()
KVM: arm64: Remove evaluation of timer state in kvm_cpu_has_pending_timer()
KVM: arm64: Kill arch_timer_context::direct field
KVM: arm64: vgic-v5: Correctly set dist->ready once initialised
KVM: arm64: vgic-v5: Make the effective priority mask a strict limit
KVM: arm64: vgic-v5: Cast vgic_apr to u32 to avoid undefined behaviours
KVM: arm64: vgic-v5: Transfer edge pending state to ICH_PPI_PENDRx_EL2
KVM: arm64: vgic-v5: Hold config_lock while finalizing GICv5 PPIs
KVM: arm64: Account for RESx bits in __compute_fgt()
KVM: arm64: Fix writeable mask for ID_AA64PFR2_EL1
arm64: Fix field references for ICH_PPI_DVIR[01]_EL2
KVM: arm64: Don't skip per-vcpu NV initialisation
KVM: arm64: vgic: Don't reset cpuif/redist addresses at finalize time
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-protected-guest: (41 commits)
: .
: pKVM support for protected guests, implementing the very long
: awaited support for anonymous memory, as the elusive guestmem
: has failed to deliver on its promises despite a multi-year
: effort. Patches courtesy of Will Deacon. From the initial cover
: letter:
:
: "[...] this patch series implements support for protected guest
: memory with pKVM, where pages are unmapped from the host as they are
: faulted into the guest and can be shared back from the guest using pKVM
: hypercalls. Protected guests are created using a new machine type
: identifier and can be booted to a shell using the kvmtool patches
: available at [2], which finally means that we are able to test the pVM
: logic in pKVM. Since this is an incremental step towards full isolation
: from the host (for example, the CPU register state and DMA accesses are
: not yet isolated), creating a pVM requires a developer Kconfig option to
: be enabled in addition to booting with 'kvm-arm.mode=protected' and
: results in a kernel taint."
: .
KVM: arm64: Don't hold 'vm_table_lock' across guest page reclaim
KVM: arm64: Allow get_pkvm_hyp_vm() to take a reference to a dying VM
KVM: arm64: Prevent teardown finalisation of referenced 'hyp_vm'
drivers/virt: pkvm: Add Kconfig dependency on DMA_RESTRICTED_POOL
KVM: arm64: Rename PKVM_PAGE_STATE_MASK
KVM: arm64: Extend pKVM page ownership selftests to cover guest hvcs
KVM: arm64: Extend pKVM page ownership selftests to cover forced reclaim
KVM: arm64: Register 'selftest_vm' in the VM table
KVM: arm64: Extend pKVM page ownership selftests to cover guest donation
KVM: arm64: Add some initial documentation for pKVM
KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled
KVM: arm64: Implement the MEM_UNSHARE hypercall for protected VMs
KVM: arm64: Implement the MEM_SHARE hypercall for protected VMs
KVM: arm64: Add hvc handler at EL2 for hypercalls from protected VMs
KVM: arm64: Return -EFAULT from VCPU_RUN on access to a poisoned pte
KVM: arm64: Reclaim faulting page from pKVM in spurious fault handler
KVM: arm64: Introduce hypercall to force reclaim of a protected page
KVM: arm64: Annotate guest donations with handle and gfn in host stage-2
KVM: arm64: Change 'pkvm_handle_t' to u16
KVM: arm64: Introduce host_stage2_set_owner_metadata_locked()
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/vgic-v5-ppi: (40 commits)
: .
: Add initial GICv5 support for KVM guests, only adding PPI support
: for the time being. Patches courtesy of Sascha Bischoff.
:
: From the cover letter:
:
: "This is v7 of the patch series to add the virtual GICv5 [1] device
: (vgic_v5). Only PPIs are supported by this initial series, and the
: vgic_v5 implementation is restricted to the CPU interface,
: only. Further patch series are to follow in due course, and will add
: support for SPIs, LPIs, the GICv5 IRS, and the GICv5 ITS."
: .
KVM: arm64: selftests: Add no-vgic-v5 selftest
KVM: arm64: selftests: Introduce a minimal GICv5 PPI selftest
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
Documentation: KVM: Introduce documentation for VGICv5
KVM: arm64: gic-v5: Probe for GICv5 device
KVM: arm64: gic-v5: Set ICH_VCTLR_EL2.En on boot
KVM: arm64: gic-v5: Introduce kvm_arm_vgic_v5_ops and register them
KVM: arm64: gic-v5: Hide FEAT_GCIE from NV GICv5 guests
KVM: arm64: gic: Hide GICv5 for protected guests
KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
irqchip/gic-v5: Introduce minimal irq_set_type() for PPIs
KVM: arm64: gic-v5: Initialise ID and priority bits when resetting vcpu
KVM: arm64: gic-v5: Create and initialise vgic_v5
KVM: arm64: gic-v5: Support GICv5 interrupts with KVM_IRQ_LINE
KVM: arm64: gic-v5: Implement direct injection of PPIs
KVM: arm64: Introduce set_direct_injection irq_op
KVM: arm64: gic-v5: Trap and mask guest ICC_PPI_ENABLERx_EL1 writes
KVM: arm64: gic-v5: Check for pending PPIs
KVM: arm64: gic-v5: Clear TWI if single task running
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/hyp-tracing: (40 commits)
: .
: EL2 tracing support, adding both 'remote' ring-buffer
: infrastructure and the tracing itself, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "The growing set of features supported by the hypervisor in protected
: mode necessitates debugging and profiling tools. Tracefs is the
: ideal candidate for this task:
:
: * It is simple to use and to script.
:
: * It is supported by various tools, from the trace-cmd CLI to the
: Android web-based perfetto.
:
: * The ring-buffer, where are stored trace events consists of linked
: pages, making it an ideal structure for sharing between kernel and
: hypervisor.
:
: This series first introduces a new generic way of creating remote events and
: remote buffers. Then it adds support to the pKVM hypervisor."
: .
tracing: selftests: Extend hotplug testing for trace remotes
tracing: Non-consuming read for trace remotes with an offline CPU
tracing: Adjust cmd_check_undefined to show unexpected undefined symbols
tracing: Restore accidentally removed SPDX tag
KVM: arm64: avoid unused-variable warning
tracing: Generate undef symbols allowlist for simple_ring_buffer
KVM: arm64: tracing: add ftrace dependency
tracing: add more symbols to whitelist
tracing: Update undefined symbols allow list for simple_ring_buffer
KVM: arm64: Fix out-of-tree build for nVHE/pKVM tracing
tracing: selftests: Add hypervisor trace remote tests
KVM: arm64: Add selftest event support to nVHE/pKVM hyp
KVM: arm64: Add hyp_enter/hyp_exit events to nVHE/pKVM hyp
KVM: arm64: Add event support to the nVHE/pKVM hyp and trace remote
KVM: arm64: Add trace reset to the nVHE/pKVM hyp
KVM: arm64: Sync boot clock with the nVHE/pKVM hyp
KVM: arm64: Add trace remote for the nVHE/pKVM hyp
KVM: arm64: Add tracing capability for the nVHE/pKVM hyp
KVM: arm64: Support unaligned fixmap in the pKVM hyp
KVM: arm64: Initialise hyp_nr_cpus for nVHE hyp
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To avoid some undesirable interactions between thermal zone suspend
and resume with user space that is running when those operations are
carried out, move them closer to the suspend and resume of devices,
respectively, by updating dpm_prepare() to carry out thermal zone
suspend and dpm_complete() to start thermal zone resume (that will
continue asynchronously).
This also makes the code easier to follow by removing one, arguably
redundant, level of indirection represented by the thermal PM notifier.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/2036875.PYKUYFuaPT@rafael.j.wysocki
|
|
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the RPMh power domain for Hawi SoC, and add definitions for
the new power domains which present in Hawi SoC:
- RPMHPD_DCX (Display Core X): supplies VDD_DISP for the display
subsystem
- RPMHPD_GBX (Graphics Box): supplies VDD_GFX_BX for the GPU/graphics
subsystem
Also, add constants for new power domain levels that supported in Hawi
SoC, including: LOW_SVS_D3_0, LOW_SVS_D1_0, LOW_SVS_D0_0, SVS_L2_0,
TURBO_L1_0/1/2, TURBO_L1_0/1/2.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some architecture-specific work needs to be performed between the state
management for exception entry/exit and the "real" work to handle the
exception. For example, arm64 needs to manipulate a number of exception
masking bits, with different exceptions requiring different masking.
Generally this can all be hidden in the architecture code, but for arm64
the current structure of irqentry_exit_to_kernel_mode() makes this
particularly difficult to handle in a way that is correct, maintainable,
and efficient.
The gory details are described in the thread surrounding:
https://lore.kernel.org/lkml/acPAzdtjK5w-rNqC@J2N7QTR9R3/
The summary is:
* Currently, irqentry_exit_to_kernel_mode() handles both involuntary
preemption AND state management necessary for exception return.
* When scheduling (including involuntary preemption), arm64 needs to
have all arm64-specific exceptions unmasked, though regular interrupts
must be masked.
* Prior to the state management for exception return, arm64 needs to
mask a number of arm64-specific exceptions, and perform some work with
these exceptions masked (with RCU watching, etc).
While in theory it is possible to handle this with a new arch_*() hook
called somewhere under irqentry_exit_to_kernel_mode(), this is fragile
and complicated, and doesn't match the flow used for exception return to
user mode, which has a separate 'prepare' step (where preemption can
occur) prior to the state management.
To solve this, refactor irqentry_exit_to_kernel_mode() to match the
style of {irqentry,syscall}_exit_to_user_mode(), moving preemption logic
into a new irqentry_exit_to_kernel_mode_preempt() function, and moving
state management in a new irqentry_exit_to_kernel_mode_after_preempt()
function. The existing irqentry_exit_to_kernel_mode() is left as a
caller of both of these, avoiding the need to modify existing callers.
There should be no functional change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-6-mark.rutland@arm.com
|
|
The generic irqentry code has entry/exit functions specifically for
exceptions taken from user mode, but doesn't have entry/exit functions
specifically for exceptions taken from kernel mode.
It would be helpful to have separate entry/exit functions specifically
for exceptions taken from kernel mode. This would make the structure of
the entry code more consistent, and would make it easier for
architectures to manage logic specific to exceptions taken from kernel
mode.
Move the logic specific to kernel mode out of irqentry_enter() and
irqentry_exit() into new irqentry_enter_from_kernel_mode() and
irqentry_exit_to_kernel_mode() functions. These are marked
__always_inline and placed in irq-entry-common.h, as with
irqentry_enter_from_user_mode() and irqentry_exit_to_user_mode(), so
that they can be inlined into architecture-specific wrappers. The
existing out-of-line irqentry_enter() and irqentry_exit() functions
retained as callers of the new functions.
The lockdep assertion from irqentry_exit() is moved into
irqentry_exit_to_user_mode() and irqentry_exit_to_kernel_mode(). This
was previously missing from irqentry_exit_to_user_mode() when called
directly, and any new lockdep assertion failure relating from this
change is a latent bug.
Aside from the lockdep change noted above, there should be no functional
change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-5-mark.rutland@arm.com
|
|
Subsequent patches will rework the irqentry_*() functions. The end
result (and the intermediate diffs) will be much clearer if the
prototype for the irqentry_enter() function is moved later, immediately
before the prototype of the irqentry_exit() function.
Move the prototype later.
This is purely a move; there should be no functional change as a result
of this change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-4-mark.rutland@arm.com
|
|
local_irq_enable_exit_to_user() and local_irq_disable_exit_to_user() are
never overridden by architecture code, and are always equivalent to
local_irq_enable() and local_irq_disable().
These functions were added on the assumption that arm64 would override
them to manage 'DAIF' exception masking, as described by Thomas Gleixner
in these threads:
https://lore.kernel.org/all/20190919150809.340471236@linutronix.de/
https://lore.kernel.org/all/alpine.DEB.2.21.1910240119090.1852@nanos.tec.linutronix.de/
In practice arm64 did not need to override either. Prior to moving to
the generic irqentry code, arm64's management of DAIF was reworked in
commit:
97d935faacde ("arm64: Unmask Debug + SError in do_notify_resume()")
Since that commit, arm64 only masks interrupts during the 'prepare' step
when returning to user mode, and masks other DAIF exceptions later.
Within arm64_exit_to_user_mode(), the arm64 entry code is as follows:
local_irq_disable();
exit_to_user_mode_prepare_legacy(regs);
local_daif_mask();
mte_check_tfsr_exit();
exit_to_user_mode();
Remove the unnecessary local_irq_enable_exit_to_user() and
local_irq_disable_exit_to_user() functions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-3-mark.rutland@arm.com
|
|
The kerneldoc comment for irqentry_enter() refers to idtentry_exit(),
which is an accidental holdover from the x86 entry code that the generic
irqentry code was based on.
Correct this to refer to irqentry_exit().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-2-mark.rutland@arm.com
|
|
The InterWave STB variant uses a TEA6330T mixer on its private
I2C bus. The mixer state is cached in software, but there is no
helper to push that register image back to hardware after system
resume.
Add a small restore helper that reapplies the cached TEA6330T
register image to the device so board drivers can restore the
external mixer state as part of their PM resume path.
Take snd_i2c_lock() around the full device lookup and restore
sequence so the bus device list traversal is also protected.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407-alsa-interwave-pm-v2-2-8dd96c6129e9@gmail.com
|
|
Export michael_mic() so that the ath11k and ath12k drivers can call it.
In addition, move it from mac80211 to cfg80211 so that the ipw2x00
drivers, which depend on cfg80211 but not mac80211, can also call it.
Currently these drivers have their own local implementations of
michael_mic() based on crypto_shash, which is redundant and inefficient.
By consolidating all the Michael MIC code into cfg80211, we'll be able
to remove the duplicate Michael MIC code in the crypto/ directory.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-3-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new helper function to retrieve the next action entry in flow
rule, check if the maximum number of actions is reached, bail out in
such case.
Replace existing opencoded iteration on the action array by this
helper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
