| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Backmerge to sync with drm/xe changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
From the cover letter [1]:
This patch set introduces kmalloc_nolock() which is the next logical
step towards any context allocation necessary to remove bpf_mem_alloc
and get rid of preallocation requirement in BPF infrastructure.
In production BPF maps grew to gigabytes in size. Preallocation wastes
memory. Alloc from any context addresses this issue for BPF and other
subsystems that are forced to preallocate too.
This long task started with introduction of alloc_pages_nolock(), then
memcg and objcg were converted to operate from any context including
NMI, this set completes the task with kmalloc_nolock() that builds on
top of alloc_pages_nolock() and memcg changes.
After that BPF subsystem will gradually adopt it everywhere.
Link: https://lore.kernel.org/all/20250909010007.1660-1-alexei.starovoitov@gmail.com/ [1]
|
|
kmalloc_nolock() relies on ability of local_trylock_t to detect
the situation when per-cpu kmem_cache is locked.
In !PREEMPT_RT local_(try)lock_irqsave(&s->cpu_slab->lock, flags)
disables IRQs and marks s->cpu_slab->lock as acquired.
local_lock_is_locked(&s->cpu_slab->lock) returns true when
slab is in the middle of manipulating per-cpu cache
of that specific kmem_cache.
kmalloc_nolock() can be called from any context and can re-enter
into ___slab_alloc():
kmalloc() -> ___slab_alloc(cache_A) -> irqsave -> NMI -> bpf ->
kmalloc_nolock() -> ___slab_alloc(cache_B)
or
kmalloc() -> ___slab_alloc(cache_A) -> irqsave -> tracepoint/kprobe -> bpf ->
kmalloc_nolock() -> ___slab_alloc(cache_B)
Hence the caller of ___slab_alloc() checks if &s->cpu_slab->lock
can be acquired without a deadlock before invoking the function.
If that specific per-cpu kmem_cache is busy the kmalloc_nolock()
retries in a different kmalloc bucket. The second attempt will
likely succeed, since this cpu locked different kmem_cache.
Similarly, in PREEMPT_RT local_lock_is_locked() returns true when
per-cpu rt_spin_lock is locked by current _task_. In this case
re-entrance into the same kmalloc bucket is unsafe, and
kmalloc_nolock() tries a different bucket that is most likely is
not locked by the current task. Though it may be locked by a
different task it's safe to rt_spin_lock() and sleep on it.
Similar to alloc_pages_nolock() the kmalloc_nolock() returns NULL
immediately if called from hard irq or NMI in PREEMPT_RT.
kfree_nolock() defers freeing to irq_work when local_lock_is_locked()
and (in_nmi() or in PREEMPT_RT).
SLUB_TINY config doesn't use local_lock_is_locked() and relies on
spin_trylock_irqsave(&n->list_lock) to allocate,
while kfree_nolock() always defers to irq_work.
Note, kfree_nolock() must be called _only_ for objects allocated
with kmalloc_nolock(). Debug checks (like kmemleak and kfence)
were skipped on allocation, hence obj = kmalloc(); kfree_nolock(obj);
will miss kmemleak/kfence book keeping and will cause false positives.
large_kmalloc is not supported by either kmalloc_nolock()
or kfree_nolock().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Since the combination of valid upper bits in slab->obj_exts with
OBJEXTS_ALLOC_FAIL bit can never happen,
use OBJEXTS_ALLOC_FAIL == (1ull << 0) as a magic sentinel
instead of (1ull << 2) to free up bit 2.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Change alloc_pages_nolock() to default to __GFP_COMP when allocating
pages, since upcoming reentrant alloc_slab_page() needs __GFP_COMP.
Also allow __GFP_ACCOUNT flag to be specified,
since most of BPF infra needs __GFP_ACCOUNT except BPF streams.
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Introduce local_lock_is_locked() that returns true when
given local_lock is locked by current cpu (in !PREEMPT_RT) or
by current task (in PREEMPT_RT).
The goal is to detect a deadlock by the caller.
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The fast path through a write will require replacing a single node in
the tree. Using a sheaf (32 nodes) is too heavy for the fast path, so
special case the node store operation by just allocating one node in the
maple state.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Use prefilled sheaves instead of bulk allocations. This should speed up
the allocations and the return path of unused allocations.
Remove the push and pop of nodes from the maple state as this is now
handled by the slab layer with sheaves.
Testing has been removed as necessary since the features of the tree
have been reduced.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Add functions for efficient guaranteed allocations e.g. in a critical
section that cannot sleep, when the exact number of allocations is not
known beforehand, but an upper limit can be calculated.
kmem_cache_prefill_sheaf() returns a sheaf containing at least given
number of objects.
kmem_cache_alloc_from_sheaf() will allocate an object from the sheaf
and is guaranteed not to fail until depleted.
kmem_cache_return_sheaf() is for giving the sheaf back to the slab
allocator after the critical section. This will also attempt to refill
it to cache's sheaf capacity for better efficiency of sheaves handling,
but it's not stricly necessary to succeed.
kmem_cache_refill_sheaf() can be used to refill a previously obtained
sheaf to requested size. If the current size is sufficient, it does
nothing. If the requested size exceeds cache's sheaf_capacity and the
sheaf's current capacity, the sheaf will be replaced with a new one,
hence the indirect pointer parameter.
kmem_cache_sheaf_size() can be used to query the current size.
The implementation supports requesting sizes that exceed cache's
sheaf_capacity, but it is not efficient - such "oversize" sheaves are
allocated fresh in kmem_cache_prefill_sheaf() and flushed and freed
immediately by kmem_cache_return_sheaf(). kmem_cache_refill_sheaf()
might be especially ineffective when replacing a sheaf with a new one of
a larger capacity. It is therefore better to size cache's
sheaf_capacity accordingly to make oversize sheaves exceptional.
CONFIG_SLUB_STATS counters are added for sheaf prefill and return
operations. A prefill or return is considered _fast when it is able to
grab or return a percpu spare sheaf (even if the sheaf needs a refill to
satisfy the request, as those should amortize over time), and _slow
otherwise (when the barn or even sheaf allocation/freeing has to be
involved). sheaf_prefill_oversize is provided to determine how many
prefills were oversize (counter for oversize returns is not necessary as
all oversize refills result in oversize returns).
When slub_debug is enabled for a cache with sheaves, no percpu sheaves
exist for it, but the prefill functionality is still provided simply by
all prefilled sheaves becoming oversize. If percpu sheaves are not
created for a cache due to not passing the sheaf_capacity argument on
cache creation, the prefills also work through oversize sheaves, but
there's a WARN_ON_ONCE() to indicate the omission.
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Add str_assert_deassert() helper to return "assert" or "deassert"
string literal depending on the boolean argument. Also add the
inversed variant str_deassert_assert().
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250923095229.2149740-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
acts as the bridge between the Audio Subsystem to the HDMI TX Controller.
This IP block is found in the HDMI subsystem of the i.MX8MP SoC.
Data received from the audio subsystem can have an arbitrary component
ordering. The HTX_PAI block has integrated muxing options to select which
sections of the 32-bit input data word will be mapped to each IEC60958
field. The HTX_PAI_FIELD_CTRL register contains mux selects to
individually select P,C,U,V,Data, and Preamble.
Use component helper so that imx8mp-hdmi-tx will be aggregate driver,
imx8mp-hdmi-pai will be component driver, then imx8mp-hdmi-pai can use
bind() ops to get the plat_data from imx8mp-hdmi-tx device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-6-shengjiu.wang@nxp.com
|
|
Add API dw_hdmi_set_sample_iec958() for IEC958 format because audio device
driver needs IEC958 information to configure this specific setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-5-shengjiu.wang@nxp.com
|
|
Add API dw_hdmi_to_plat_data() to fetch plat_data because audio device
driver needs it to enable(disable)_audio().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-4-shengjiu.wang@nxp.com
|
|
The IEC958 subframe format SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE are used
in HDMI and DisplayPort to describe the audio stream, but hardware device
may need to reorder the IEC958 bits for internal transmission, so need
these standard bits definitions for IEC958 subframe format.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-3-shengjiu.wang@nxp.com
|
|
In commit 73b3294b1152 ("mm: simplify folio_page() and folio_page_idx()")
we converted folio_page() into a static inline function. However briefly
afterwards in commit a847b17009ec ("mm: constify highmem related functions
for improved const-correctness") we had to add some nasty const-away
casting to make the compiler happy when checking const correctness.
So let's just convert it back to a simple macro so the compiler can check
const correctness properly. There is the alternative of using a
_Generic() similar to page_folio(), but there is not a lot of benefit
compared to just using a simple macro.
Link: https://lkml.kernel.org/r/20250923140058.2020023-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KCSAN reports a data race on mm_cluster.hiwater_rss, which can be accessed
concurrently from various paths like page migration and memory unmapping
without synchronization.
Since hiwater_rss is a statistical field for accounting purposes, this
data race is benign. Annotate both the read and write accesses with
data_race() to make KCSAN happy.
Link: https://lkml.kernel.org/r/20250926092426.43312-1-lance.yang@linux.dev
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Reported-by: syzbot+60192c8877d0bc92a92b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/68d6364e.050a0220.3390a8.000d.GAE@google.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Marco Elver <elver@google.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ksm: Fix incorrect accounting of KSM counters during
fork", v3.
The first patch in this series fixes the incorrect accounting of KSM
counters such as ksm_merging_pages, ksm_rmap_items, and the global
ksm_zero_pages during fork.
The following patch add a selftest to verify the ksm_merging_pages counter
was updated correctly during fork.
Test Results
============
Without the first patch
-----------------------
# [RUN] test_fork_ksm_merging_page_count
not ok 10 ksm_merging_page in child: 32
With the first patch
--------------------
# [RUN] test_fork_ksm_merging_page_count
ok 10 ksm_merging_pages is not inherited after fork
This patch (of 2):
Currently, the KSM-related counters in `mm_struct`, such as
`ksm_merging_pages`, `ksm_rmap_items`, and `ksm_zero_pages`, are inherited
by the child process during fork. This results in inconsistent
accounting.
When a process uses KSM, identical pages are merged and an rmap item is
created for each merged page. The `ksm_merging_pages` and
`ksm_rmap_items` counters are updated accordingly. However, after a fork,
these counters are copied to the child while the corresponding rmap items
are not. As a result, when the child later triggers an unmerge, there are
no rmap items present in the child, so the counters remain stale, leading
to incorrect accounting.
A similar issue exists with `ksm_zero_pages`, which maintains both a
global counter and a per-process counter. During fork, the per-process
counter is inherited by the child, but the global counter is not
incremented. Since the child also references zero pages, the global
counter should be updated as well. Otherwise, during zero-page unmerge,
both the global and per-process counters are decremented, causing the
global counter to become inconsistent.
To fix this, ksm_merging_pages and ksm_rmap_items are reset to 0 during
fork, and the global ksm_zero_pages counter is updated with the
per-process ksm_zero_pages value inherited by the child. This ensures
that KSM statistics remain accurate and reflect the activity of each
process correctly.
Link: https://lkml.kernel.org/r/cover.1758648700.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/7b9870eb67ccc0d79593940d9dbd4a0b39b5d396.1758648700.git.donettom@linux.ibm.com
Fixes: 7609385337a4 ("ksm: count ksm merging pages for each process")
Fixes: cb4df4cae4f2 ("ksm: count allocated ksm rmap_items for each process")
Fixes: e2942062e01d ("ksm: count all zero pages placed by KSM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: Improve mlock tracking for large folios", v3.
The patchset includes several fixes and improvements related to mlock
tracking of large folios.
The main objective is to reduce the undercount of Mlocked memory in
/proc/meminfo and improve the accuracy of the statistics.
Patches 1-2:
These patches address a minor race condition in folio_referenced_one()
related to mlock_vma_folio().
Currently, mlock_vma_folio() is called on large folio without the page
table lock, which can result in a race condition with unmap (i.e.
MADV_DONTNEED). This can lead to partially mapped folios on the
unevictable LRU list.
While not a significant issue, I do not believe backporting is necessary.
Patch 3:
This patch adds mlocking logic similar to folio_referenced_one() to
try_to_unmap_one(), allowing for mlocking of large folios where possible.
Patch 4-5:
These patches modifies finish_fault() and faultaround to map in the entire
folio when possible, enabling efficient mlocking upon addition to the
rmap.
Patch 6:
This patch makes rmap mlock large folios if they are fully mapped,
addressing the primary source of mlock undercount for large folios.
This patch (of 6):
Add a PVMW_PGTABLE_CROSSSED flag that page_vma_mapped_walk() will set if
the page is mapped across page table boundary. Unlike other PVMW_* flags,
this one is result of page_vma_mapped_walk() and not set by the caller.
folio_referenced_one() will use it to detect if it safe to mlock the
folio.
[akpm@linux-foundation.org: s/CROSSSED/CROSSED/]
Link: https://lkml.kernel.org/r/20250923110711.690639-1-kirill@shutemov.name
Link: https://lkml.kernel.org/r/20250923110711.690639-2-kirill@shutemov.name
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 4 are cc:stable and the remainder address post-6.16 issues
or aren't considered necessary for -stable kernels. 6 of these fixes
are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-09-27-22-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
include/linux/pgtable.h: convert arch_enter_lazy_mmu_mode() and friends to static inlines
mm/damon/sysfs: do not ignore callback's return value in damon_sysfs_damon_call()
mailmap: add entry for Bence Csókás
fs/proc/task_mmu: check p->vec_buf for NULL
kmsan: fix out-of-bounds access to shadow memory
mm/hugetlb: fix copy_hugetlb_page_range() to use ->pt_share_count
mm/hugetlb: fix folio is still mapped when deleted
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18 round 2
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
|
|
Add interface definitions for load balance ID and LAG per multiplane group
functionality. This patch introduces the hardware capability bits needed
to support balance ID in multiplane LAG configurations.
The new fields include:
- load_balance_id: 4-bit field for balance identifier.
- lag_per_mp_group: capability bit for LAG per multiplane group support.
These interface additions are prerequisites for implementing balance ID
support in the MLX5 driver.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758521191-814350-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Before this cap, firmware requested a certain creation order between TIR
objects and SQs of the same transport domain to properly support the
self loopback prevention feature. If order is not preserved, explicit
modify_tir operations are necessary after the opening of the SQs.
When set, this cap bit indicates that this firmware requirement /
limitation no longer holds.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758521191-814350-2-git-send-email-tariqt@nvidia.com
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull 6.17-devel branch for applying further changes cleanly.
Signed-off-by: Taksahi Iwai <tiwai@suse.de>
|
|
When building kernel docs, the following warning appeared:
WARNING: ./include/uapi/sound/compress_params.h:364
struct member 'chan_map' not described in 'snd_dec_opus'
The inline struct 'snd_dec_opus_ch_map' inside 'snd_dec_opus' was not
properly documented. This patch documents the 'chan_map' member and its
fields (stream_count, coupled_count, channel_map), resolving the warning.
Fixes: 5d36370f3431 ("ALSA: compress: add raw opus codec define and opus decoder structs")
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This adds support for changed firmware addresses on the B2 revision of
CS35L56 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Defer setting the cs35l56_base.fw_regs pointer until after the REVID has
been read in cs35l56_hw_init(). Also make the corresponding change to the
cs35l56_hda drivers to prevent a build break.
This is preparing for firmware registers that change address between
revisions of the same device.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are very few places that have cause to do that - all in core
VFS now, and all done to files that are not yet opened (or visible
to anybody else, for that matter).
Let's turn f_path into a union of struct path __f_path and const
struct path f_path. It's C, not C++ - 6.5.2.3[4] in C99 and
later explicitly allows that kind of type-punning.
That way any attempts to bypass these checks will be either very
easy to catch, or (if the bastards get sufficiently creative to
make it hard to spot with grep alone) very clearly malicious -
and still catchable with a bit of instrumentation for sparse.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18
- Add support for MediaTek MT6878 I2C
- Drop support for S3C2410
|
|
Move functionality used only by trusted_tpm1.c out of the public header
<keys/trusted_tpm.h>. Specifically, change the exported functions into
static functions, since they are not used outside trusted_tpm1.c, and
move various other definitions and inline functions to trusted_tpm1.c.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the __struct_group() helper to fix 31 instances of the following
type of warnings:
30 net/bluetooth/mgmt_config.c:16:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/bluetooth/mgmt_config.c:22:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When enabling debug via CONFIG_BT_FEATURE_DEBUG include function and
line information by default otherwise it is hard to make any sense of
which function the logs comes from.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This attempts to detect if an ISO link has been waiting for an ISO
buffer for longer than the maximum allowed transport latency then
proceed to use hci_link_tx_to which prints an error and disconnects.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This aligns the usage of socket sk_sndtimeo as conn_timeout when
initiating a connection and then use it when scheduling the
resulting HCI command, similar to what has been done in bf98feea5b65
("Bluetooth: hci_conn: Always use sk_timeo as conn_timeout").
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add the __counted_by_le() compiler attribute to the flexible array
member 'supported_commands' to improve access bounds-checking via
CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.
Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
APIs based on __pm_runtime_idle() (pm_runtime_idle(), pm_request_idle())
do not return 1 when already suspended. They return -EAGAIN. This is
already covered in the docs, so the entry for "1" is redundant and
conflicting.
(pm_runtime_put() and pm_runtime_put_sync() were previously incorrect,
but that's fixed in "PM: runtime: pm_runtime_put{,_sync}() returns 1
when already suspended", to ensure consistency with APIs like
pm_runtime_put_autosuspend().)
RPM_GET_PUT APIs based on __pm_runtime_suspend() do return 1 when
already suspended, but the language is a little unclear -- it's not
really an "error", so it seems better to list as a clarification before
the 0/success case. Additionally, they only actually return 1 when the
refcount makes it to 0; if the usage counter is still non-zero, we
return 0.
pm_runtime_put(), etc., also don't appear at first like they can ever
see "-EAGAIN: Runtime PM usage_count non-zero", because in non-racy
conditions, pm_runtime_put() would drop its reference count, see it's
non-zero, and return early (in __pm_runtime_idle()). However, it's
possible to race with another actor that increments the usage_count
afterward, since rpm_idle() is protected by a separate lock; in such a
case, we may see -EAGAIN.
Because this case is only seen in the presence of concurrent actors, it
makes sense to clarify that this is when "usage_count **became**
non-zero", by way of some racing actor.
Lastly, pm_runtime_put_sync_suspend() duplicated some -EAGAIN language.
Fix that.
Fixes: 271ff96d6066 ("PM: runtime: Document return values of suspend-related API functions")
Link: https://lore.kernel.org/linux-pm/aJ5pkEJuixTaybV4@google.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
./include/linux/bpf.h: crypto/sha2.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=25501
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250926095240.3397539-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, upon the reception of an ADD_ADDR (and when the fullmesh flag
is not used), the in-kernel PM will create new subflows using the local
address the routing configuration will pick.
It would be easier to pick local addresses from a selected list of
endpoints, and use it only once, than relying on routing rules.
Use case: both the client (C) and the server (S) have two addresses (a
and b). The client establishes the connection between C(a) and S(a).
Once established, the server announces its additional address S(b). Once
received, the client connects to it using its second address C(b).
Compared to a situation without the 'laminar' endpoint for C(b), the
client didn't use this address C(b) to establish a subflow to the
server's primary address S(a). So at the end, we have:
C S
C(a) --- S(a)
C(b) --- S(b)
In case of a 3rd address on each side (C(c) and S(c)), upon the
reception of an ADD_ADDR with S(c), the client should not pick C(b)
because it has already been used. C(c) should then be used.
Note that this situation is currently possible if C doesn't add any
endpoint, but configure the routing in order to pick C(b) for the route
to S(b), and pick C(c) for the route to S(c). That doesn't sound very
practical because it means knowing in advance the IP addresses that
will be used and announced by the server.
'laminar', like the idea of laminar flows: the different subflows don't
mix with each other on an endpoint, unlike the "turbulent" way traffic
is mixed by 'fullmesh'.
In the code, the new endpoint type is added. Similar to the other
subflow types, an MPTCP_INFO counter is added. While at it, hole are now
commented in struct mptcp_info, to remember next time that these holes
can no longer be used.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/503
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-15-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'local_addr_max', which in fact represents the maximum
number of 'subflow' endpoints that can be used to create new subflows,
and not the number of local addresses that have been used to create
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_subflow_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
Also move the variable and function next to the other 'endp_X_max' ones.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-9-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_accept_max', which in fact represents the limit
of ADD_ADDR that can be accepted: the limit set via 'ip mptcp limit
add_addr_accepted X' for example. It is not linked to the maximum number
of accepted ADD_ADDR.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_add_addr_accepted. Not to break the current
uAPI, the new name is added as a 'define' pointing to the former name.
This will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-8-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_signal_max', which in fact represents the
maximum number of 'signal' endpoints that can be used to announced
addresses, and not the number of ADD_ADDR that can be signalled.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_signal_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-7-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'subflows_max', which in fact represents the limit of
extra subflows: the limit set via 'ip mptcp limit subflows X' for
example. It is not linked to the maximum number of created / possible
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_extra_subflows. Not to break the current uAPI,
the new name is added as a 'define' pointing to the former name. This
will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-6-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few variables linked to the Path-Managers are confusing, and it would
help current and future developers, to clarify them.
One of them is 'subflows', which in fact represents the number of extra
subflows: all the additional subflows created after the initial one, and
not the total number of subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_extra_subflows. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-5-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a NPU callback to initialize flow stats and remove NPU stats
initialization from airoha_npu_get routine. Add num_stats_entries to
airoha_npu_ppe_stats_setup routine.
This patch makes the code more readable since NPU statistic are now
initialized on demand by the NPU consumer (at the moment NPU statistic
are configured just by the airoha_eth driver).
Moreover this patch allows the NPU consumer (PPE module) to explicitly
enable/disable NPU flow stats.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250924-airoha-npu-init-stats-callback-v1-1-88bdf3c941b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024
clarifies it a bit further. Implement reporting interface through as
addition to FEC stats available in ethtool. Drivers can leave bin
counter uninitialized if per-lane values are provided. In this case the
core will recalculate summ for the bin.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have some rather subtle code around zeroing tail entries, minimizing
cache bouncing. Let's put it all in one place.
Doing this also reduces the text size slightly, e.g. for
drivers/vhost/net.o
Before: text: 15,114 bytes
After: text: 15,082 bytes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/adb9d941de4a2b619ddb2be271a9939849e70687.1758690291.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-09-25
this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.
The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.
Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.
Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.
4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.
Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.
Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.
The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.
* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
can: netlink: add userland error messages
can: dev: add can_get_ctrlmode_str()
can: calc_bittiming: make can_calc_tdco() FD agnostic
can: netlink: make can_tdc_fill_info() FD agnostic
can: netlink: add can_bitrate_const_fill_info()
can: netlink: add can_bittiming_const_fill_info()
can: netlink: add can_bittiming_fill_info()
can: netlink: add can_data_bittiming_get_size()
can: netlink: make can_tdc_get_size() FD agnostic
can: netlink: add can_ctrlmode_changelink()
can: netlink: add can_dtb_changelink()
can: netlink: make can_tdc_changelink() FD agnostic
can: netlink: remove useless check in can_tdc_changelink()
can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
can: netlink: add can_validate_databittiming()
can: netlink: add can_validate_tdc()
can: netlink: refactor can_validate_bittiming()
can: netlink: document which symbols are FD specific
can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
can: dev: move struct data_bittiming_params to linux/can/bittiming.h
...
====================
Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a bit more things, including pull requests from drivers:
- mt76: MLO support, HW restart improvements
- rtw88/89: small features, prep for RTL8922DE support
- ath10k: GTK rekey fixes
- cfg80211/mac80211:
- additions for more NAN support
- S1G channel representation cleanup
* tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (167 commits)
wifi: libertas: add WQ_UNBOUND to alloc_workqueue users
Revert "wifi: libertas: WQ_PERCPU added to alloc_workqueue users"
wifi: libertas: WQ_PERCPU added to alloc_workqueue users
wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid()
wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again
wifi: ath12k: enforce CPU endian format for all QMI data
wifi: ath12k: Use 1KB Cache Flush Command for QoS TID Descriptors
wifi: ath12k: Fix flush cache failure during RX queue update
wifi: ath12k: Add Retry Mechanism for REO RX Queue Update Failures
wifi: ath12k: Refactor REO command to use ath12k_dp_rx_tid_rxq
wifi: ath12k: Refactor RX TID buffer cleanup into helper function
wifi: ath12k: Refactor RX TID deletion handling into helper function
wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256
wifi: cfg80211: remove IEEE80211_CHAN_{1,2,4,8,16}MHZ flags
wifi: rtw89: avoid circular locking dependency in ser_state_run()
wifi: rtw89: fix leak in rtw89_core_send_nullfunc()
wifi: rtw89: avoid possible TX wait initialization race
wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
wifi: mac80211: fix Rx packet handling when pubsta information is not available
...
====================
Link: https://patch.msgid.link/20250925232341.4544-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of thermal drivers for 6.18-rc1 from Daniel Lezcano:
"- Add the QCS615 compatible DT bindings for QCom platforms (Gaurav
Kohli)
- Support fallback trimming values when the fuse is empty in the R-Car
driver (Marek Vasut)
- Remove unneeded semicolon in the Mediatek LVTS driver (Jiapeng
Chong)
- Fix the LMH Kconfig option by selecting QCOM_SCM and take the
opportunity to add the COMPILE_TEST option for the QCom's LMH
feature (Dmitry Baryshkov)
- Fix the missing includes and incorrect error message in the Qcom's
LMH driver (Dmitry Baryshkov)
- Fix comment typo and add the documentation in the Kconfig for the
R-Car Gen3 and Gen4 (Marek Vasut)
- Add Tegra114 SOCTHERM support (Svyatoslav Ryhel)
- Rename the functions name in the driver to be consistent and generic
with the different R-Car platform variants (Wolfram Sang)
- Register the TI K3 J72xx bandgap sensor as a hwmon sensor too
(Michael Walle)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3S SoC (Claudiu Beznea)
- Support the GRF in the Rockchip driver (Sebastian Reichel)
- Add a temperature IIO sensor channel in the generic thermal ADC
driver (Svyatoslav Ryhel)
- Document the temperature sensor on the QCOM's Glymur platform (Manaf
Meethalavalappu)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3E SoC (John Madieu)"
* tag 'thermal-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
thermal/drivers/qcom: Make LMH select QCOM_SCM
...
|
