| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Keep the .modinfo section during linking, but strip it from the final
vmlinux.
Adjust scripts/mksysmap to exclude modinfo symbols from kallsyms.
This change will allow the next commit to extract the .modinfo section
from the vmlinux.unstripped intermediate.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/aaf67c07447215463300fccaa758904bac42f992.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
In an effort to give more human readable messages when errors occur
because of conflicting options, it can be useful to convert the CAN
control mode flags into text.
Add a function which converts the first set CAN control mode into a
human readable string. The reason to only convert the first one is to
simplify edge cases: imagine that there are several invalid control
modes, we would just return the first invalid one to the user, thus
not having to handle complex string concatenation. The user can then
solve the first problem, call the netlink interface again and see the
next issue.
People who wish to enumerate all the control modes can still do so by,
for example, using this new function in a for_each_set_bit() loop.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-19-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_calc_tdco() uses the CAN_CTRLMODE_FD_TDC_MASK and
CAN_CTRLMODE_TDC_AUTO macros making it specific to CAN FD. Add the tdc
mask to the function parameter list. The value of the tdc auto flag
can then be derived from that mask and stored in a local variable.
This way, the function becomes CAN FD agnostic and can be reused later
on for the CAN XL TDC.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-18-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Factorise the TDC validation out of can_validate() and move it in the
new can_validate_tdc() function. This is a preparation patch for the
introduction of CAN XL because this TDC validation will be reused
later on.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-5-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CAN XL netlink interface will also have data bitrate and TDC
parameters. The current FD parameters do not have a prefix in their
names to differentiate them.
Because the netlink interface is part of the UAPI, it is unfortunately
not feasible to rename the existing symbols to add an FD_ prefix. The
best alternative is to add a comment for each of the symbols to notify
the reader of which parts are CAN FD specific.
While at it, fix a typo: transiver -> transceiver.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-3-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_get_relative_tdco() needs to access can_priv->fd making it
specific to CAN FD. Change the function parameter from struct can_priv
to struct data_bittiming_params. This way, the function becomes CAN FD
agnostic and can be reused later on for the CAN XL TDC.
Now that we dropped the dependency on struct can_priv, also move
can_get_relative_tdco() back to bittiming.h where it was meant to
belong to.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-2-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In commit b803c4a4f788 ("can: dev: add struct data_bittiming_params to
group FD parameters"), struct data_bittiming_params was put into
linux/can/dev.h.
This structure being a collection of bittiming parameters, on second
thought, bittiming.h is actually a better location. This way, users of
struct data_bittiming_params will not have to forcefully include
linux/can/dev.h thus removing some complexity and reducing the risk of
circular dependencies in headers.
Move struct data_bittiming_params from linux/can/dev.h to
linux/can/bittiming.h.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-1-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
By populating:
net_device->min_mtu
and
net_device->max_mtu
the net core infrastructure will automatically:
1. validate that the user's inputs are in range.
2. report those min and max MTU values through the netlink
interface.
Add can_set_default_mtu() which sets the default mtu value as well as
the minimum and maximum values. The logic for the default mtu value
remains unchanged:
- CANFD_MTU if the device has a static CAN_CTRLMODE_FD.
- CAN_MTU otherwise.
Call can_set_default_mtu() each time the CAN_CTRLMODE_FD is modified.
This will guarantee that the MTU value is always consistent with the
control mode flags.
With this, the checks done in can_change_mtu() become fully redundant
and will be removed in an upcoming change and it is now possible to
confirm the minimum and maximum MTU values on a physical CAN interface
by doing:
$ ip --details link show can0
The virtual interfaces (vcan and vxcan) are not impacted by this
change.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-can-fix-mtu-v3-3-581bde113f52@kernel.org
[mkl: squashed https://patch.msgid.link/20250924143644.17622-2-mailhol@kernel.org]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Many machines treat fan state 3 as some sort of automatic mode,
which is superior to the separate SMM calls for switching to
automatic fan mode for two reasons:
- the fan control mode can be controlled for each fan separately
- the current fan control mode can be retrieved from the BIOS
On some machines however, this special fan state does not exist.
Fan state 3 acts like a regular fan state on such machines or
does not exist at all. Such machines usually use separate SMM calls
for enabling/disabling automatic fan control.
Add support for it. If the machine supports separate SMM calls
for changing the fan control mode, then the other interface is
ignored.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250917181036.10972-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
With `CONFIG_TRACE_MMIO_ACCESS=y`, the `{read,write}{b,w,l,q}{_relaxed}()`
mmio accessors unconditionally call `log_{post_}{read,write}_mmio()`
helpers, which in turn call the ftrace ops for `rwmmio` trace events
This adds a performance penalty per mmio accessor call, even when
`rwmmio` events are disabled at runtime (~80% overhead on local
measurement).
Guard these with `tracepoint_enabled()`.
Signed-off-by: Varad Gautam <varadgautam@google.com>
Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These flags are specific to gpio-mmio and belong in linux/gpio/generic.h
so move them there.
Link: https://lore.kernel.org/r/20250917-gpio-generic-flags-v1-2-69f51fee8c89@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Make the flags passed to gpio_generic_chip_init() use the same prefix as
the rest of the modernized generic GPIO chip API.
Link: https://lore.kernel.org/r/20250917-gpio-generic-flags-v1-1-69f51fee8c89@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.18, take 2
This is an updated drop for v6.18, fixing the invalid commit
reference in the original tag.
CoreSight selfhosted tracing subsystem updates targeting Linux v6.18, includes:
- Clean up and consolidate clocks handling
- Support for exposing labels via sysfs for better device identification
- Add Qualcomm Trace Network On Chip driver support
- Miscellaneous fixes
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.18-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (27 commits)
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
coresight: tmc: Support atclk
coresight-etm4x: Conditionally access register TRCEXTINSELR
coresight: fix indentation error in cscfg_remove_owned_csdev_configs()
coresight: tnoc: Fix a NULL vs IS_ERR() bug in probe
coresight: add coresight Trace Network On Chip driver
...
|
|
Some distributions (e.g., CachyOS) support building the kernel with -O3,
but doing so may break kfuncs, resulting in their symbols not being
properly exported.
In fact, with gcc -O3, some kfuncs may be optimized away despite being
annotated as noinline. This happens because gcc can still clone the
function during IPA optimizations, e.g., by duplicating or inlining it
into callers, and then dropping the standalone symbol. This breaks BTF
ID resolution since resolve_btfids relies on the presence of a global
symbol for each kfunc.
Currently, this is not an issue for upstream, because we don't allow
building the kernel with -O3, but it may be safer to address it anyway,
to prevent potential issues in the future if compilers become more
aggressive with optimizations.
Therefore, add __noclone to __bpf_kfunc to ensure kfuncs are never
cloned and remain distinct, globally visible symbols, regardless of
the optimization level.
Fixes: 57e7c169cd6af ("bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs")
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Link: https://lore.kernel.org/r/20250924081426.156934-1-arighi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently uprobe (BPF_PROG_TYPE_KPROBE) program can't write to the
context registers data. While this makes sense for kprobe attachments,
for uprobe attachment it might make sense to be able to change user
space registers to alter application execution.
Since uprobe and kprobe programs share the same type (BPF_PROG_TYPE_KPROBE),
we can't deny write access to context during the program load. We need
to check on it during program attachment to see if it's going to be
kprobe or uprobe.
Storing the program's write attempt to context and checking on it
during the attachment.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix a kernel trace [1] caused by releasing an HWS action of a local flow
counter in mlx5_cmd_hws_delete_fte(), where the HWS action refcount and
mutex were not initialized and the counter struct could already be freed
when deleting the rule.
Fix it by adding the missing initializations and adding refcount for the
local flow counter struct.
[1] Kernel log:
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
mlx5_fs_put_hws_action.part.0.cold+0x21/0x94 [mlx5_core]
mlx5_fc_put_hws_action+0x96/0xad [mlx5_core]
mlx5_fs_destroy_fs_actions+0x8b/0x152 [mlx5_core]
mlx5_cmd_hws_delete_fte+0x5a/0xa0 [mlx5_core]
del_hw_fte+0x1ce/0x260 [mlx5_core]
mlx5_del_flow_rules+0x12d/0x240 [mlx5_core]
? ttwu_queue_wakelist+0xf4/0x110
mlx5_ib_destroy_flow+0x103/0x1b0 [mlx5_ib]
uverbs_free_flow+0x20/0x50 [ib_uverbs]
destroy_hw_idr_uobject+0x1b/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x34/0x1a0 [ib_uverbs]
uobj_destroy+0x3c/0x80 [ib_uverbs]
ib_uverbs_run_method+0x23e/0x360 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
ib_uverbs_cmd_verbs+0x14f/0x2c0 [ib_uverbs]
? do_tty_write+0x1a9/0x270
? file_tty_write.constprop.0+0x98/0xc0
? new_sync_write+0xfc/0x190
ib_uverbs_ioctl+0xd7/0x160 [ib_uverbs]
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x59/0x90
Fixes: b581f4266928 ("net/mlx5: fs, manage flow counters HWS action sharing by refcount")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy_driver_register() isn't used outside phy_device.c any longer,
so we can stop exporting it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dff44b83-4a85-4fff-bf6b-f12efd97b56e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
busylock was protecting UDP sockets against packet floods,
but unfortunately was not protecting the host itself.
Under stress, many cpus could spin while acquiring the busylock,
and NIC had to drop packets. Or packets would be dropped
in cpu backlog if RPS/RFS were in place.
This patch replaces the busylock by intermediate
lockless queues. (One queue per NUMA node).
This means that fewer number of cpus have to acquire
the UDP receive queue lock.
Most of the cpus can either:
- immediately drop the packet.
- or queue it in their NUMA aware lockless queue.
Then one of the cpu is chosen to process this lockless queue
in a batch.
The batch only contains packets that were cooked on the same
NUMA node, thus with very limited latency impact.
Tested:
DDOS targeting a victim UDP socket, on a platform with 6 NUMA nodes
(Intel(R) Xeon(R) 6985P-C)
Before:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 1004179 0.0
Udp6InErrors 3117 0.0
Udp6RcvbufErrors 3117 0.0
After:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 1116633 0.0
Udp6InErrors 14197275 0.0
Udp6RcvbufErrors 14197275 0.0
We can see this host can now proces 14.2 M more packets per second
while under attack, and the victim socket can receive 11 % more
packets.
I used a small bpftrace program measuring time (in us) spent in
__udp_enqueue_schedule_skb().
Before:
@udp_enqueue_us[398]:
[0] 24901 |@@@ |
[1] 63512 |@@@@@@@@@ |
[2, 4) 344827 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[4, 8) 244673 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8, 16) 54022 |@@@@@@@@ |
[16, 32) 222134 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32, 64) 232042 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[64, 128) 4219 | |
[128, 256) 188 | |
After:
@udp_enqueue_us[398]:
[0] 5608855 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[1] 1111277 |@@@@@@@@@@ |
[2, 4) 501439 |@@@@ |
[4, 8) 102921 | |
[8, 16) 29895 | |
[16, 32) 43500 | |
[32, 64) 31552 | |
[64, 128) 979 | |
[128, 256) 13 | |
Note that the remaining bottleneck for this platform is in
udp_drops_inc() because we limited struct numa_drop_counters
to only two nodes so far.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250922104240.2182559-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge the xdp_pull_data stable branch into the master branch. No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Merge the xdp_pull_data stable branch into the net branch. No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
Add Qualcomm TEE driver (QTEE)
This introduces a Trusted Execution Environment (TEE) driver for
Qualcomm TEE (QTEE).
QTEE enables Trusted Applications (TAs) and services to run securely. It
uses an object-based interface, where each service is an object with
sets of operations.
Kernel and userspace services are also available to QTEE through a
similar approach. QTEE makes callback requests that are converted into
object invocations. These objects can represent services within the
kernel or userspace process.
We extend the TEE subsystem to understand object parameters and an ioctl
call so client can invoke objects in QTEE:
- TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_*
- TEE_IOC_OBJECT_INVOKE
The existing ioctl calls TEE_IOC_SUPPL_RECV and TEE_IOC_SUPPL_SEND are
used for invoking services in the userspace process by QTEE.
The TEE backend driver uses the QTEE Transport Message to communicate
with QTEE. Interactions through the object INVOKE interface are
translated into QTEE messages. Likewise, object invocations from QTEE
for userspace objects are converted into SEND/RECV ioctl calls to
supplicants.
* tag 'tee-qcomtee-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
tee: allow a driver to allocate a tee_device without a pool
Link: https://lore.kernel.org/r/20250915174957.GA2040478@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.18
1. STM32 OMM: Fix ineffective/missing setting of the req2ack in the
device based on DT property, if the value is different than 0.
2. Samsung Exynos SROM: Fix IO map resource leak if
of_platform_populate() in probe() failed.
3. Broadcom brcmstb: Document existing, older devices in Devicetree
bindings.
4. Tegra 210 EMC: Document OPP table for interconnects (driver usage
will come later) and define memory client IDs as bindings, because
these are shared between DTS and driver.
* tag 'memory-controller-drv-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra210: Use bindings for client ids
dt-bindings: memory: tegra210: Add memory client IDs
dt-bindings: memory: tegra210: emc: Document OPP table and interconnect
dt-bindings: memory: Update brcmstb-memc-ddr binding with older chips
memory: samsung: exynos-srom: Fix of_iomap leak in exynos_srom_probe
memory: stm32_omm: Fix req2ack update test
Link: https://lore.kernel.org/r/20250912140030.204650-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm
Microchip arm-soc updates for v6.18
This update includes:
- low priority fixes to the PM code, in relation to recent addition of
sam9x75 or sama7d65 SoCs
- removal of the 2.5V regulator for low power modes since this is
no longer supported
* tag 'at91-soc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Remove 2.5V regulator
ARM: at91: pm: save and restore ACR during PLL disable/enable
ARM: at91: pm: fix MCKx restore routine
ARM: at91: pm: fix .uhp_udp_mask specification for current SoCs
Link: https://lore.kernel.org/r/20250916150328.27015-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm device driver updates for v6.18
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
firmware: qcom: scm: add support for object invocation
firmware: qcom: tzmem: export shm_bridge create/delete
Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Move skb_frag_t adjustment into bpf_xdp_shrink_data() and extend its
functionality to be able to shrink an xdp fragment from both head and
tail. In a later patch, bpf_xdp_pull_data() will reuse it to shrink an
xdp fragment from head.
Additionally, in bpf_xdp_frags_shrink_tail(), breaking the loop when
bpf_xdp_shrink_data() returns false (i.e., not releasing the current
fragment) is not necessary as the loop condition, offset > 0, has the
same effect. Remove the else branch to simplify the code.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-3-ameryhung@gmail.com
|
|
It is possible for bpf_xdp_adjust_tail() to free all fragments. The
kfunc currently clears the XDP_FLAGS_HAS_FRAGS bit, but not
XDP_FLAGS_FRAGS_PF_MEMALLOC. So far, this has not caused a issue when
building sk_buff from xdp_buff since all readers of xdp_buff->flags
use the flag only when there are fragments. Clear the
XDP_FLAGS_FRAGS_PF_MEMALLOC bit as well to make the flags correct.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-2-ameryhung@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.18
This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
* tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: sun55i: Complete AXP717A sub-functions
arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal
arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal
arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal
arm64: dts: sun55i: a523: Assign standard clock rates to PRCM bus clocks
ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami SoM
riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM
dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings
ARM: dts: allwinner: Add Orange Pi Zero Interface Board overlay
ARM: dts: allwinner: orangepi-zero-plus2: Add default audio routing
ARM: dts: allwinner: orangepi-zero: Add default audio routing
arm64: dts: allwinner: a523: Add NPU device node
arm64: dts: allwinner: a523: Add MCU PRCM CCU node
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add LEDs
Link: https://lore.kernel.org/r/aMrtuZg8HlR--TAt@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently, functions with 'union' arguments cannot be traced with
fentry/fexit:
bpftrace -e 'fentry:release_pages { exit(); }' -v
The function release_pages arg0 type UNION is unsupported.
The type of the 'release_pages' arg0 is defined as:
typedef union {
struct page **pages;
struct folio **folios;
struct encoded_page **encoded_pages;
} release_pages_arg __attribute__ ((__transparent_union__));
This patch relaxes the restriction by allowing function arguments of type
'union' to be traced in verifier.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250919044110.23729-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The comment for SCX_KF_DISPATCH was incomplete and didn't explain that
ops.dispatch() may temporarily release the rq lock, allowing ENQUEUE and
SELECT_CPU operations to be nested inside DISPATCH contexts.
Update the comment to clarify this nesting behavior and provide better
context for when these operations can occur within dispatch.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently, signed load instructions into arena memory are unsupported.
The compiler is free to generate these, and on GCC-14 we see a
corresponding error when it happens. The hurdle in supporting them is
deciding which unused opcode to use to mark them for the JIT's own
consumption. After much thinking, it appears 0xc0 / BPF_NOSPEC can be
combined with load instructions to identify signed arena loads. Use
this to recognize and JIT them appropriately, and remove the verifier
side limitation on the program if the JIT supports them.
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250923110157.18326-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Filesystems such as NFS may need to defer dropbehind until after their
2-stage writes are done. This adds a helper
folio_end_writeback_no_dropbehind() that allows them to release the
writeback flag without immediately dropping the folio.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add a helper to allow filesystems to attempt to free the 'dropbehind'
folio.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/all/5588a06f6d5a2cf6746828e2d36e7ada668b1739.1745381692.git.trond.myklebust@hammerspace.com/
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This was the last caller of xdr_set_scratch_page(), so I remove this
function while I'm at it.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The only snag here is that __folio_alloc_node() doesn't handle
NUMA_NO_NODE, so I also need to update svc_pool_map_get_node() to return
numa_mem_id() instead. I arrived at this approach by looking at what
other users of __folio_alloc_node() do for this case.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This will replace xdr_set_scratch_page() when we switch pages to folios.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Nothing calls this macro.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Clean up: because svc_rpcb_cleanup() and svc_xprt_destroy_all()
are always invoked in pairs, we can deduplicate code by moving
the svc_rpcb_cleanup() call sites into svc_xprt_destroy_all().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
We have a lot of old dprintk() call sites that aren't going anywhere
anytime soon. At the same time, turning them up is a serious burden on
the host due to the console locking overhead.
Add a new Kconfig option that redirects dfprintk() output to the trace
buffer. This is more efficient than logging to the console and allows
for proper interleaving of dprintk and static tracepoint events.
Since using trace_printk() causes scary warnings to pop at boot time,
this new option defaults to "n".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
KERN_CONT hails from a simpler time, when SMP wasn't the norm. These
days, it doesn't quite work right since another printk() can always race
in between the first one and the one being "continued".
Nothing calls dprintk_rcu_cont(), so just remove it. The only caller of
dprintk_cont() is in nfs_commit_release_pages(). Just use a normal
dprintk() there instead, since this is not SMP-safe anyway.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
To form the WCL platform as a subplatform of PTL in definition,
WCL pci ids are splited into saparate group from PTL.
So update the pciidlist struct to cover all the pci ids.
v2:
- Squash wcl description in single patch for display and xe.(jani,gustavo)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com
|
|
The tracepoint kvm_iocsr is only used by the loongarch architecture. As
trace events can take up to 5K of memory, move this tracepoint into the
LoongArch specific tracing file so that it doesn't waste memory for all
other architectures.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch adds necessary plumbing in verifier, syscall and maps to
support handling new kfunc bpf_task_work_schedule and kernel structure
bpf_task_work. The idea is similar to how we already handle bpf_wq and
bpf_timer.
verifier changes validate calls to bpf_task_work_schedule to make sure
it is safe and expected invariants hold.
btf part is required to detect bpf_task_work structure inside map value
and store its offset, which will be used in the next patch to calculate
key and value addresses.
arraymap and hashtab changes are needed to handle freeing of the
bpf_task_work: run code needed to deinitialize it, for example cancel
task_work callback if possible.
The use of bpf_task_work and proper implementation for kfuncs are
introduced in the next patch.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250923112404.668720-6-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
TRACE_SEQ_BUFFER_SIZE is dependent on the architecture for its size. on 64-bit
systems, it is 8148 bytes. forced 8-byte alignment in size_t and seq_buf means
that trace_seq is 8200 bytes on 64-bit systems. moving the buffer to the end
of the struct fixes the issue. there shouldn't be any side effects, i.e.
pointer arithmetic on trace_seq
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250821053917.23301-1-git@elijahs.space
Signed-off-by: Elijah Wright <git@elijahs.space>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Move the cpuidle driver check from __acpi_processor_start() to
acpi_processor_power_init() which allows variable acpi_idle_driver to
become static.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250923032428.2656329-2-lihuisong@huawei.com
[ rjw: Subject tweak, new changelog, adjustment of a new comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CoreSight drivers enable pclk and atclk conditionally. For example,
pclk is only enabled in the static probe, while atclk is an optional
clock that it is enabled for both dynamic and static probes, if it is
present. In the current CoreSight drivers, these two clocks are
initialized separately. This causes complex and duplicate codes.
CoreSight drivers are refined so that clocks are initialized in one go.
For this purpose, this commit renames coresight_get_enable_apb_pclk() to
coresight_get_enable_clocks() and encapsulates clock initialization
logic:
- If a clock is initialized successfully, its clock pointer is assigned
to the double pointer passed as an argument.
- For ACPI devices, clocks are controlled by firmware, directly bail
out.
- Skip enabling pclk for an AMBA device.
- If atclk is not found, the corresponding double pointer is set to
NULL. The function returns Success (0) to guide callers can proceed
with no error.
- Otherwise, an error number is returned for failures.
The function became complex, move it from the header to the CoreSight
core layer and the symbol is exported. Added comments for recording
details.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-7-1dfe10bb3f6f@arm.com
|
|
The programming clock is enabled by AMBA bus driver before a dynamic
probe. As a result, a CoreSight driver may redundantly enable the same
clock.
To avoid this, add a check for device type and skip enabling the
programming clock for AMBA devices. The returned NULL pointer will be
tolerated by the drivers.
Fixes: 73d779a03a76 ("coresight: etm4x: Change etm4_platform_driver driver for MMIO devices")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-6-1dfe10bb3f6f@arm.com
|
|
Some CoreSight components have programming clocks (pclk) and are enabled
using clk_get() and clk_prepare_enable(). However, in many cases, these
clocks are not disabled when modules exit and only released by clk_put().
To fix the issue, this commit refactors programming clock by replacing
clk_get() and clk_prepare_enable() with devm_clk_get_optional_enabled()
for enabling APB clock. If the "apb_pclk" clock is not found, a NULL
pointer is returned, and the function proceeds to attempt enabling the
"apb" clock.
Since ACPI platforms rely on firmware to manage clocks, returning a NULL
pointer in this case leaves clock management to the firmware rather than
the driver. This effectively avoids a clock imbalance issue during
module removal - where the clock could be disabled twice: once during
the ACPI runtime suspend and again during the devm resource release.
Callers are updated to reuse the returned error value.
With the change, programming clocks are managed as resources in driver
model layer, allowing clock cleanup to be handled automatically. As a
result, manual cleanup operations are no longer needed and are removed
from the Coresight drivers.
Fixes: 73d779a03a76 ("coresight: etm4x: Change etm4_platform_driver driver for MMIO devices")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-4-1dfe10bb3f6f@arm.com
|
|
The function is unused; remove it.
Instead of relying on a general blit helper, drivers should pick a blit
function by themselves from their list of supported color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-4-tzimmermann@suse.de
|
