| Age | Commit message (Collapse) | Author | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-08-21
We've added 9 non-merge commits during the last 3 day(s) which contain
a total of 13 files changed, 1027 insertions(+), 27 deletions(-).
The main changes are:
1) Added bpf dynptr support for accessing the metadata of a skb,
from Jakub Sitnicki.
The patches are merged from a stable branch bpf-next/skb-meta-dynptr.
The same patches have also been merged into bpf-next/master.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cover metadata access from a modified skb clone
selftests/bpf: Cover read/write to skb metadata at an offset
selftests/bpf: Cover write access to skb metadata via dynptr
selftests/bpf: Cover read access to skb metadata via dynptr
selftests/bpf: Parametrize test_xdp_context_tuntap
selftests/bpf: Pass just bpf_map to xdp_context_test helper
selftests/bpf: Cover verifier checks for skb_meta dynptr type
bpf: Enable read/write access to skb metadata through a dynptr
bpf: Add dynptr type for skb metadata
====================
Link: https://patch.msgid.link/20250821191827.2099022-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three new issues in the ACPI APEI error injection code and
an ACPI platform firmware runtime update interface issue:
- Make ACPI APEI error injection check the version of the request
when mapping the EINJ parameter structure in the BIOS reserved
memory to prevent injecting errors based on an uninitialized
field (Tony Luck)
- Fix potential NULL dereference in __einj_error_inject() that may
occur when memory allocation fails (Charles Han)
- Remove the __exit annotation from einj_remove(), so it can be
called on errors during faux device probe (Uwe Kleine-König)
- Use a security-version-number check instead of a runtime version
check during ACPI platform firmware runtime driver updates to
prevent those updates from failing due to false-positive driver
version check failures (Chen Yu)"
* tag 'acpi-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: pfr_update: Fix the driver update version check
ACPI: APEI: EINJ: Fix resource leak by remove callback in .exit.text
ACPI: APEI: EINJ: fix potential NULL dereference in __einj_error_inject()
ACPI: APEI: EINJ: Check if user asked for EINJV2 injection
|
|
Sync up with mainline to bring in changes to include/linux/sprintf.h
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Putting together all the previously added pieces to support optimized
uprobes on top of 5-byte nop instruction.
The current uprobe execution goes through following:
- installs breakpoint instruction over original instruction
- exception handler hit and calls related uprobe consumers
- and either simulates original instruction or does out of line single step
execution of it
- returns to user space
The optimized uprobe path does following:
- checks the original instruction is 5-byte nop (plus other checks)
- adds (or uses existing) user space trampoline with uprobe syscall
- overwrites original instruction (5-byte nop) with call to user space
trampoline
- the user space trampoline executes uprobe syscall that calls related uprobe
consumers
- trampoline returns back to next instruction
This approach won't speed up all uprobes as it's limited to using nop5 as
original instruction, but we plan to use nop5 as USDT probe instruction
(which currently uses single byte nop) and speed up the USDT probes.
The arch_uprobe_optimize triggers the uprobe optimization and is called after
first uprobe hit. I originally had it called on uprobe installation but then
it clashed with elf loader, because the user space trampoline was added in a
place where loader might need to put elf segments, so I decided to do it after
first uprobe hit when loading is done.
The uprobe is un-optimized in arch specific set_orig_insn call.
The instruction overwrite is x86 arch specific and needs to go through 3 updates:
(on top of nop5 instruction)
- write int3 into 1st byte
- write last 4 bytes of the call instruction
- update the call instruction opcode
And cleanup goes though similar reverse stages:
- overwrite call opcode with breakpoint (int3)
- write last 4 bytes of the nop5 instruction
- write the nop5 first instruction byte
We do not unmap and release uprobe trampoline when it's no longer needed,
because there's no easy way to make sure none of the threads is still
inside the trampoline. But we do not waste memory, because there's just
single page for all the uprobe trampoline mappings.
We do waste frame on page mapping for every 4GB by keeping the uprobe
trampoline page mapped, but that seems ok.
We take the benefit from the fact that set_swbp and set_orig_insn are
called under mmap_write_lock(mm), so we can use the current instruction
as the state the uprobe is in - nop5/breakpoint/call trampoline -
and decide the needed action (optimize/un-optimize) based on that.
Attaching the speed up from benchs/run_bench_uprobes.sh script:
current:
usermode-count : 152.604 ± 0.044M/s
syscall-count : 13.359 ± 0.042M/s
--> uprobe-nop : 3.229 ± 0.002M/s
uprobe-push : 3.086 ± 0.004M/s
uprobe-ret : 1.114 ± 0.004M/s
uprobe-nop5 : 1.121 ± 0.005M/s
uretprobe-nop : 2.145 ± 0.002M/s
uretprobe-push : 2.070 ± 0.001M/s
uretprobe-ret : 0.931 ± 0.001M/s
uretprobe-nop5 : 0.957 ± 0.001M/s
after the change:
usermode-count : 152.448 ± 0.244M/s
syscall-count : 14.321 ± 0.059M/s
uprobe-nop : 3.148 ± 0.007M/s
uprobe-push : 2.976 ± 0.004M/s
uprobe-ret : 1.068 ± 0.003M/s
--> uprobe-nop5 : 7.038 ± 0.007M/s
uretprobe-nop : 2.109 ± 0.004M/s
uretprobe-push : 2.035 ± 0.001M/s
uretprobe-ret : 0.908 ± 0.001M/s
uretprobe-nop5 : 3.377 ± 0.009M/s
I see bit more speed up on Intel (above) compared to AMD. The big nop5
speed up is partly due to emulating nop5 and partly due to optimization.
The key speed up we do this for is the USDT switch from nop to nop5:
uprobe-nop : 3.148 ± 0.007M/s
uprobe-nop5 : 7.038 ± 0.007M/s
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250720112133.244369-11-jolsa@kernel.org
|
|
Adding new uprobe syscall that calls uprobe handlers for given
'breakpoint' address.
The idea is that the 'breakpoint' address calls the user space
trampoline which executes the uprobe syscall.
The syscall handler reads the return address of the initial call
to retrieve the original 'breakpoint' address. With this address
we find the related uprobe object and call its consumers.
Adding the arch_uprobe_trampoline_mapping function that provides
uprobe trampoline mapping. This mapping is backed with one global
page initialized at __init time and shared by the all the mapping
instances.
We do not allow to execute uprobe syscall if the caller is not
from uprobe trampoline mapping.
The uprobe syscall ensures the consumer (bpf program) sees registers
values in the state before the trampoline was called.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250720112133.244369-10-jolsa@kernel.org
|
|
Adding support to add special mapping for user space trampoline with
following functions:
uprobe_trampoline_get - find or add uprobe_trampoline
uprobe_trampoline_put - remove or destroy uprobe_trampoline
The user space trampoline is exported as arch specific user space special
mapping through tramp_mapping, which is initialized in following changes
with new uprobe syscall.
The uprobe trampoline needs to be callable/reachable from the probed address,
so while searching for available address we use is_reachable_by_call function
to decide if the uprobe trampoline is callable from the probe address.
All uprobe_trampoline objects are stored in uprobes_state object and are
cleaned up when the process mm_struct goes down. Adding new arch hooks
for that, because this change is x86_64 specific.
Locking is provided by callers in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250720112133.244369-9-jolsa@kernel.org
|
|
Making update_ref_ctr call in uprobe_write conditional based
on do_ref_ctr argument. This way we can use uprobe_write for
instruction update without doing ref_ctr_offset update.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-8-jolsa@kernel.org
|
|
The uprobe_write has special path to restore the original page when we
write original instruction back. This happens when uprobe_write detects
that we want to write anything else but breakpoint instruction.
Moving the detection away and passing it to uprobe_write as argument,
so it's possible to write different instructions (other than just
breakpoint and rest).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-7-jolsa@kernel.org
|
|
Adding nbytes argument to uprobe_write and related functions as
preparation for writing whole instructions in following changes.
Also renaming opcode arguments to insn, which seems to fit better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-6-jolsa@kernel.org
|
|
Adding uprobe_write function that does what uprobe_write_opcode did
so far, but allows to pass verify callback function that checks the
memory location before writing the opcode.
It will be used in following changes to implement specific checking
logic for instruction update.
The uprobe_write_opcode now calls uprobe_write with verify_opcode as
the verify callback.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-5-jolsa@kernel.org
|
|
Making copy_from_page global and adding uprobe prefix.
Adding the uprobe prefix to copy_to_page as well for symmetry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-4-jolsa@kernel.org
|
|
We are about to add uprobe trampoline, so cleaning up the namespace.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-3-jolsa@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
|
|
|
|
There is a page_pool_put() function but no get equivalent.
Having multiple references to a page pool is quite useful.
It avoids branching in create / destroy paths in drivers
which support memory providers.
Use the new helper in bnxt.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250820025704.166248-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a lot of build warnings for LTO-enabled objtool check, increase
COMMAND_LINE_SIZE up to 4096, rename a missing GCC_PLUGIN_STACKLEAK to
KSTACK_ERASE, and fix some bugs about arch timer, module loading, LBT
and KVM"
* tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add address alignment check in pch_pic register access
LoongArch: KVM: Use kvm_get_vcpu_by_id() instead of kvm_get_vcpu()
LoongArch: KVM: Fix stack protector issue in send_ipi_data()
LoongArch: KVM: Make function kvm_own_lbt() robust
LoongArch: Rename GCC_PLUGIN_STACKLEAK to KSTACK_ERASE
LoongArch: Save LBT before FPU in setup_sigcontext()
LoongArch: Optimize module load time by optimizing PLT/GOT counting
LoongArch: Add cpuhotplug hooks to fix high cpu usage of vCPU threads
LoongArch: Increase COMMAND_LINE_SIZE up to 4096
LoongArch: Pass annotate-tablejump option if LTO is enabled
objtool/LoongArch: Get table size correctly if LTO is enabled
|
|
A recent lockdep[1] splat observed while running blktest block/005
reveals a potential deadlock caused by the cpu_hotplug_lock dependency
on ->freeze_lock. This dependency was introduced by commit 033b667a823e
("block: blk-rq-qos: guard rq-qos helpers by static key").
That change added a static key to avoid fetching q->rq_qos when
neither blk-wbt nor blk-iolatency is configured. The static key
dynamically patches kernel text to a NOP when disabled, eliminating
overhead of fetching q->rq_qos in the I/O hot path. However, enabling
a static key at runtime requires acquiring both cpu_hotplug_lock and
jump_label_mutex. When this happens after the queue has already been
frozen (i.e., while holding ->freeze_lock), it creates a locking
dependency from cpu_hotplug_lock to ->freeze_lock, which leads to a
potential deadlock reported by lockdep [1].
To resolve this, replace the static key mechanism with q->queue_flags:
QUEUE_FLAG_QOS_ENABLED. This flag is evaluated in the fast path before
accessing q->rq_qos. If the flag is set, we proceed to fetch q->rq_qos;
otherwise, the access is skipped.
Since q->queue_flags is commonly accessed in IO hotpath and resides in
the first cacheline of struct request_queue, checking it imposes minimal
overhead while eliminating the deadlock risk.
This change avoids the lockdep splat without introducing performance
regressions.
[1] https://lore.kernel.org/linux-block/4fdm37so3o4xricdgfosgmohn63aa7wj3ua4e5vpihoamwg3ui@fq42f5q5t5ic/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/4fdm37so3o4xricdgfosgmohn63aa7wj3ua4e5vpihoamwg3ui@fq42f5q5t5ic/
Fixes: 033b667a823e ("block: blk-rq-qos: guard rq-qos helpers by static key")
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250814082612.500845-4-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since getting the address of the fsverity_info has gotten a bit more
expensive, make fsverity_cleanup_inode() check for IS_VERITY() instead.
This avoids adding more overhead to non-verity files.
This assumes that verity info is never set when !IS_VERITY(), which is
currently true, but add a VFS_WARN_ON_ONCE() that asserts that. (This
of course defeats the optimization, but only when CONFIG_VFS_DEBUG=y.)
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-14-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that all fsverity-capable filesystems store the pointer to
fsverity_info in the filesystem-specific part of the inode structure,
inode::i_verity_info is no longer needed. Update fsverity_info_addr()
to no longer support the fallback to inode::i_verity_info. Finally,
remove inode::i_verity_info itself, and move the forward declaration of
struct fsverity_info from fs.h (which no longer needs it) to fsverity.h.
The end result of the migration to the filesystem-specific pointer is
memory savings on CONFIG_FS_VERITY=y kernels for all filesystems that
don't support fsverity. Specifically, their in-memory inodes are now
smaller by the size of a pointer: either 4 or 8 bytes.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-13-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add an inode_info_offs field to struct fsverity_operations, and update
fs/verity/ to support it. When set to a nonzero value, it specifies the
offset to the fsverity_info pointer within the filesystem-specific part
of the inode structure, to be used instead of inode::i_verity_info.
Since this makes inode::i_verity_info no longer necessarily used, update
comments that mentioned it.
This is a prerequisite for a later commit that removes
inode::i_verity_info, saving memory and improving cache efficiency on
filesystems that don't support fsverity.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-9-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that all fscrypt-capable filesystems store the pointer to
fscrypt_inode_info in the filesystem-specific part of the inode
structure, inode::i_crypt_info is no longer needed. Update
fscrypt_inode_info_addr() to no longer support the fallback to
inode::i_crypt_info. Finally, remove inode::i_crypt_info itself along
with the now-unnecessary forward declaration of fscrypt_inode_info.
The end result of the migration to the filesystem-specific pointer is
memory savings on CONFIG_FS_ENCRYPTION=y kernels for all filesystems
that don't support fscrypt. Specifically, their in-memory inodes are
now smaller by the size of a pointer: either 4 or 8 bytes.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-8-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add an inode_info_offs field to struct fscrypt_operations, and update
fs/crypto/ to support it. When set to a nonzero value, it specifies the
offset to the fscrypt_inode_info pointer within the filesystem-specific
part of the inode structure, to be used instead of inode::i_crypt_info.
Since this makes inode::i_crypt_info no longer necessarily used, update
comments that mentioned it.
This is a prerequisite for a later commit that removes
inode::i_crypt_info, saving memory and improving cache efficiency with
filesystems that don't support fscrypt.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-3-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add and use a helper function fscrypt_get_inode_info_raw(). It loads an
inode's fscrypt info pointer using a raw dereference, which is
appropriate when the caller knows the key setup already happened.
This eliminates most occurrences of inode::i_crypt_info in the source,
in preparation for replacing that with a filesystem-specific field.
Co-developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/20250810075706.172910-2-ebiggers@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The LAN8842 is a low-power, single port triple-speed (10BASE-T/ 100BASE-TX/
1000BASE-T) ethernet physical layer transceiver (PHY) that supports
transmission and reception of data on standard CAT-5, as well as CAT-5e and
CAT-6, Unshielded Twisted Pair (UTP) cables.
The LAN8842 supports industry-standard SGMII (Serial Gigabit Media
Independent Interface) providing chip-to-chip connection to a Gigabit
Ethernet MAC using a single serialized link (differential pair) in each
direction.
There are 2 variants of the lan8842. The one that supports timestamping
(lan8842) and one that doesn't have timestamping (lan8832).
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250818075121.1298170-5-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next-vhca-id
A preparation patchset for adjacent function vports.
Adjacent functions can delegate their SR-IOV VFs to sibling PFs,
allowing for more flexible and scalable management in multi-host and
ECPF-to-host scenarios. Adjacent vports can be managed by the management
PF via their unique vhca id and can't be managed by function index as the
index can conflict with the local vports/vfs.
This series provides:
- Use the cached vcha id instead of querying it every time from fw
- Query hca cap using vhca id instead of function id when FW supports it
- Add HW capabilities and required definitions for adjacent function vports
* tag 'mlx5-next-vhca-id' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
{rdma,net}/mlx5: export mlx5_vport_get_vhca_id
net/mlx5: E-Switch, Set/Query hca cap via vhca id
net/mlx5: E-Switch, Cache vport vhca id on first cap query
net/mlx5: mlx5_ifc, Add hardware definitions needed for adjacent vports
====================
Link: https://patch.msgid.link/20250815194901.298689-1-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The port's actor_oper_port_state activity flag should be updated immediately
after changing the lacp_active option to reflect the current mode correctly.
Fixes: 3a755cd8b7c6 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A few fixes that came in during the past week, there's some updates for
the CS35L56 which adjust the driver for production silicon and a fix for
buggy resume of the ES9389.
|
|
SO_RCVBUF and SO_SNDBUF have limited range today, unless
distros or system admins change rmem_max and wmem_max.
Even iproute2 uses 1 MB SO_RCVBUF which is capped by
the kernel.
Decouple [rw]mem_max and [rw]mem_default and increase
[rw]mem_max to 4 MB.
Before:
$ sysctl net.core.rmem_default net.core.rmem_max net.core.wmem_default net.core.wmem_max
net.core.rmem_default = 212992
net.core.rmem_max = 212992
net.core.wmem_default = 212992
net.core.wmem_max = 212992
After:
$ sysctl net.core.rmem_default net.core.rmem_max net.core.wmem_default net.core.wmem_max
net.core.rmem_default = 212992
net.core.rmem_max = 4194304
net.core.wmem_default = 212992
net.core.wmem_max = 4194304
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250819174030.1986278-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The major change is struct pcie_ctx_hw_stats_v2 which has new latency
histograms added.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250819163919.104075-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported, on-disk footer.ino and footer.nid is the same and
out-of-range, let's add sanity check on f2fs_alloc_nid() to detect
any potential corruption in free_nid_list.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Some bridges can update HDCP status based on userspace requests if they
support HDCP.
The HDCP property is created after connector initialization and before
registration, just like other connector properties.
Add the content protection property to the connector if a bridge
supports HDCP.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250812082135.3351172-2-fshao@chromium.org
|
|
CS35L63 uses different algorithm IDs from CS35L56.
Add a new mechanism to handle different alg IDs between parts in the
CS35L56 driver.
Fixes: 978858791ced ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Production silicon for CS36L63 has some small differences compared to
pre-production silicon. Update firmware addresses, which are different.
No product was ever released with pre-production silicon so there is no
need for the driver to include support for it.
Fixes: 978858791ced ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the CPU is offline, the timer of LoongArch is not correctly closed.
This is harmless for real machines, but resulting in an excessively high
cpu usage rate of the offline vCPU thread in the virtual machines.
To correctly close the timer, we have made the following modifications:
Register the cpu hotplug event (CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING)
for LoongArch. This event's hooks will be called to close the timer when
the CPU is offline.
Clear the timer interrupt when the timer is turned off. Since before the
timer is turned off, there may be a timer interrupt that has already been
in the pending state due to the interruption of the disabled, which also
affects the halt state of the offline vCPU.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Update drm-misc-fixes to -rc2.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently the kernel will happily route io_uring requests with metadata
to file operations that don't support it. Add a FMODE_ flag to guard
that.
Fixes: 4de2ce04c862 ("fs: introduce IOCB_HAS_METADATA for metadata")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250819082517.2038819-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Bring v6.17-rc2 in to unstuck for-linux-next.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_gpusvm_for_each_notifier, drm_gpusvm_for_each_notifier_safe and
drm_gpusvm_for_each_range_safe macros are useful for locating notifiers
and ranges within a user-specified range. By making these macros public,
we enable broader access and utility for developers who need to leverage
them in their implementations.
v2 (Matthew Brost)
- drop inline __drm_gpusvm_range_find
- /s/notifier_iter_first/drm_gpusvm_notifier_find
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-5-himal.prasad.ghimiray@intel.com
|
|
This ops is used to iterate over GPUVA's in the user-provided range
and split the existing sparse VMA's if the start or end of the input
range lies within it. The operations can create up to 2 REMAPS and 2 MAPs.
The primary use case is for drivers to assign attributes to GPU VAs in
the specified range without performing unmaps or merging mappings,
supporting fine-grained control over sparse va's.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Himal Prasad Ghimiray<himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-4-himal.prasad.ghimiray@intel.com
|
|
drm_gpuva_init() only has one internal user, and given we are about to
add new optional fields, it only add maintenance burden for no real
benefit, so let's kill the thing now.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-3-himal.prasad.ghimiray@intel.com
|
|
We are about to pass more arguments to drm_gpuvm_sm_map[_ops_create](),
so, before we do that, let's pass arguments through a struct instead
of changing each call site every time a new optional argument is added.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Brendan King <Brendan.King@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Caterina Shablia <caterina.shablia@collabora.com>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com> # imagination/pvr_vm.c
Acked-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-2-himal.prasad.ghimiray@intel.com
|
|
Convert SCTP cookies to use HMAC-SHA256, instead of the previous choice
of the legacy algorithms HMAC-MD5 and HMAC-SHA1. Simplify and optimize
the code by using the HMAC-SHA256 library instead of crypto_shash, and
by preparing the HMAC key when it is generated instead of per-operation.
This doesn't break compatibility, since the cookie format is an
implementation detail, not part of the SCTP protocol itself.
Note that the cookie size doesn't change either. The HMAC field was
already 32 bytes, even though previously at most 20 bytes were actually
compared. 32 bytes exactly fits an untruncated HMAC-SHA256 value. So,
although we could safely truncate the MAC to something slightly shorter,
for now just keep the cookie size the same.
I also considered SipHash, but that would generate only 8-byte MACs. An
8-byte MAC *might* suffice here. However, there's quite a lot of
information in the SCTP cookies: more than in TCP SYN cookies. So
absent an analysis that occasional forgeries of all that information is
okay in SCTP, I errored on the side of caution.
Remove HMAC-MD5 and HMAC-SHA1 as options, since the new HMAC-SHA256
option is just better. It's faster as well as more secure. For
example, benchmarking on x86_64, cookie authentication is now nearly 3x
as fast as the previous default choice and implementation of HMAC-MD5.
Also just make the kernel always support cookie authentication if SCTP
is supported at all, rather than making it optional in the build. (It
was sort of optional before, but it didn't really work properly. E.g.,
a kernel with CONFIG_SCTP_COOKIE_HMAC_MD5=n still supported HMAC-MD5
cookie authentication if CONFIG_CRYPTO_HMAC and CONFIG_CRYPTO_MD5
happened to be enabled in the kconfig for other reasons.)
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For SCTP chunk authentication, use the HMAC-SHA1 and HMAC-SHA256 library
functions instead of crypto_shash. This is simpler and faster. There's
no longer any need to pre-allocate 'crypto_shash' objects; the SCTP code
now simply calls into the HMAC code directly.
As part of this, make SCTP always support both HMAC-SHA1 and
HMAC-SHA256. Previously, it only guaranteed support for HMAC-SHA1.
However, HMAC-SHA256 tended to be supported too anyway, as it was
supported if CONFIG_CRYPTO_SHA256 was enabled elsewhere in the kconfig.
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of the data structures that are used in the hot path matters
for performance (IOPS). Hence this patch that reduces the size of struct
ufshcd_lrb on 64-bit systems by 16 bytes. The size of this data
structure is reduced from 152 to 136 bytes.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250819154356.2256952-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Except for sk_clone_lock(), all accesses to sk->sk_memcg
is done under CONFIG_MEMCG.
As a bonus, let's define sk->sk_memcg under CONFIG_MEMCG.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will store a flag in the lowest bit of sk->sk_memcg.
Then, we cannot pass the raw pointer to mem_cgroup_under_socket_pressure().
Let's pass struct sock to it and rename the function to match other
functions starting with mem_cgroup_sk_.
Note that the helper is moved to sock.h to use mem_cgroup_from_sk().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will store a flag in the lowest bit of sk->sk_memcg.
Then, we cannot pass the raw pointer to mem_cgroup_charge_skmem()
and mem_cgroup_uncharge_skmem().
Let's pass struct sock to the functions.
While at it, they are renamed to match other functions starting
with mem_cgroup_sk_.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The socket memcg feature is enabled by a static key and
only works for non-root cgroup.
We check both conditions in many places.
Let's factorise it as a helper function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
