| Age | Commit message (Collapse) | Author | Lines |
|---|
|
The last user of the mt9v032 driver through board files and platform
data has long been removed. Drop support for platform data from the
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The mt9v022 driver got removed in commit e7eab49132ba ("media:
staging/media/soc_camera: remove this driver"), but its platform header
file got left behind. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Replace hverkuil@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace hansverk@cisco.com by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add missing documentation for the tags_srcu member that was introduced
to defer freeing of tags page_list to prevent use-after-free when
iterating tags.
Fixes htmldocs warning:
WARNING: include/linux/blk-mq.h:536 struct member 'tags_srcu' not described in 'blk_mq_tag_set'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bios are embedded into other structures, and at least spare is unhappy
about embedding structures with variable sized arrays. There's no
real need to the array anyway, we can replace it with a helper pointing
to the memory just behind the bio, and with the previous cleanups there
is very few site doing anything special with it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just a simpler wrapper around bio_init for callers that want to
initialize a bio with inline bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add handling of the Lenovo-specific and HP-specific EFI variables for
speaker ID.
Future Lenovo and HP models will not give the codec driver access to the
speaker detect GPIO. Instead, the BIOS will read the GPIO and create an
EFI variable with a value indicating the state of the GPIO.
The Lenovo and HP EFI variables are both defined to have only two valid
values. But the variable name, GUID and values are different.
This adds a new exported function cs_amp_get_vendor_spkid().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-3-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The get_time() callbacks always need to match the bases clockid.
Instead of maintaining that association twice in hrtimer_bases,
use a helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-8-3ae822e5bfbd@linutronix.de
|
|
Various other helpers contain open-coded implementations of
hrtimer_cb_get_time(). This prevents refactoring the implementation.
Reuse the existing helper.
For this to work, move hrtimer_cb_get_time() a bit up in the file and also
make its argument 'const'.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-7-3ae822e5bfbd@linutronix.de
|
|
Add compatible strings for the four SCU interrupt controller instances
on the AST2700 SoC (scu-ic0 to 3), following the multi-instance model used
on AST2600.
Also define interrupt indices in the binding header.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250908011812.1033858-4-ryan_chen@aspeedtech.com
|
|
Add a new ad_select policy 'port_priority' that uses the per-port
actor priority values (set via ad_actor_port_prio) to determine
aggregator selection.
This allows administrators to influence which ports are preferred
for aggregation by assigning different priority values, providing
more flexible load balancing control in LACP configurations.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a new netlink attribute 'actor_port_prio' to allow setting
the LACP actor port priority on a per-slave basis. This extends the
existing bonding infrastructure to support more granular control over
LACP negotiations.
The priority value is embedded in LACPDU packets and will be used by
subsequent patches to influence aggregator selection policies.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Define the Ports Phy Histogram Configuration Register (PPHCR) to expose
RS-FEC histogram bin ranges, and expose a new counter group in the Ports
Performance Counters Register (PPCNT) to report the corresponding
histogram values.
Co-developed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1756884600-520195-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce two new ioctl commands, PTP_SYS_OFFSET_PRECISE_CYCLES and
PTP_SYS_OFFSET_EXTENDED_CYCLES, to allow user space to access the
raw free-running cycle counter from PTP devices.
These ioctls are variants of the existing PRECISE and EXTENDED
offset queries, but instead of returning device time in realtime,
they return the raw cycle counter value.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/1755008228-88881-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clang 22 recently added support for defining __SANITIZE__ macros similar
to GCC [1], which causes warnings (or errors with CONFIG_WERROR=y or W=e)
with the existing defines that the kernel creates to emulate this behavior
with existing clang versions.
In file included from <built-in>:3:
In file included from include/linux/compiler_types.h:171:
include/linux/compiler-clang.h:37:9: error: '__SANITIZE_THREAD__' macro redefined [-Werror,-Wmacro-redefined]
37 | #define __SANITIZE_THREAD__
| ^
<built-in>:352:9: note: previous definition is here
352 | #define __SANITIZE_THREAD__ 1
| ^
Refactor compiler-clang.h to only define the sanitizer macros when they
are undefined and adjust the rest of the code to use these macros for
checking if the sanitizers are enabled, clearing up the warnings and
allowing the kernel to easily drop these defines when the minimum
supported version of LLVM for building the kernel becomes 22.0.0 or newer.
Link: https://lkml.kernel.org/r/20250902-clang-update-sanitize-defines-v1-1-cf3702ca3d92@kernel.org
Link: https://github.com/llvm/llvm-project/commit/568c23bbd3303518c5056d7f03444dae4fdc8a9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kasan_populate_vmalloc() and its helpers ignore the caller's gfp_mask and
always allocate memory using the hardcoded GFP_KERNEL flag. This makes
them inconsistent with vmalloc(), which was recently extended to support
GFP_NOFS and GFP_NOIO allocations.
Page table allocations performed during shadow population also ignore the
external gfp_mask. To preserve the intended semantics of GFP_NOFS and
GFP_NOIO, wrap the apply_to_page_range() calls into the appropriate
memalloc scope.
xfs calls vmalloc with GFP_NOFS, so this bug could lead to deadlock.
There was a report here
https://lkml.kernel.org/r/686ea951.050a0220.385921.0016.GAE@google.com
This patch:
- Extends kasan_populate_vmalloc() and helpers to take gfp_mask;
- Passes gfp_mask down to alloc_pages_bulk() and __get_free_page();
- Enforces GFP_NOFS/NOIO semantics with memalloc_*_save()/restore()
around apply_to_page_range();
- Updates vmalloc.c and percpu allocator call sites accordingly.
Link: https://lkml.kernel.org/r/20250831121058.92971-1-urezki@gmail.com
Fixes: 451769ebb7e7 ("mm/vmalloc: alloc GFP_NO{FS,IO} for vmalloc")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reported-by: syzbot+3470c9ffee63e4abafeb@syzkaller.appspotmail.com
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add tas2020, tas2118, tas2120, tas2320, tas2570, tas2572, tas5825
tas5827 support in tas2781 driver.
Tas2118, tas2x20, tas257x have no on-chip DSP, tas582x have on-chip
DSP but have no calibration required stereo smart amplifier.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
No more user of SNMP_MIB_SENTINEL, we can remove it.
Also remove snmp_get_cpu_field[64]_batch() helpers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250905165813.1470708-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use ARRAY_SIZE(), so that we know the limit at compile time.
Following patch needs this preliminary change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250905165813.1470708-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct vmbus_close_msg is used for sending the VMBus channel close
message. It contains a struct vmbus_channel_msginfo, which has a
flex array member at the end. The latter's presence in the middle
of struct vmbus_close_msg causes warnings when built with
-Wflex-array-member-not-at-end.
But the struct vmbus_channel_msginfo is unused because the Hyper-V host
does not send a response to the channel close message. So remove the
struct vmbus_channel_msginfo. Then, since the only remaining field is
struct vmbus_channel_close_channel, also remove the containing struct
vmbus_close_msg and directly use struct vmbus_channel_close_channel.
Besides eliminating unnecessary complexity, these changes resolve the
-Wflex-array-member-not-at-end warnings.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Detect booting as an "L1VH" partition. This is a new scenario very
similar to root partition where the mshv_root driver can be used to
create and manage guest partitions.
It mostly works the same as root partition, but there are some
differences in how various features are handled. hv_l1vh_partition()
is introduced to handle these cases. Add hv_parent_partition()
which returns true for either case, replacing some hv_root_partition()
checks.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This field is unused, but the correct structure size is needed
when computing the amount of space for the output argument to
reside, so that it does not cross a page boundary.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
Add missing __attribute_const__ annotations to generic implementations of
ffs(), __ffs(), fls(), and __fls() functions. These are pure mathematical
functions that always return the same result for the same input with no
side effects, making them eligible for compiler optimization.
Build tested with x86_64 defconfig using GCC 14.2.0, which should validate
the implementations when used by ARM, ARM64, LoongArch, Microblaze,
NIOS2, and SPARC32 architectures.
Link: https://github.com/KSPP/linux/issues/364 [1]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The minimum size and alignment boundary for FFA_RXTX_MAP is returned in
bit[1:0]. Mask off any other bits in w2 when reading the minimum buffer
size in hyp_ffa_post_init.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Per Larsen <perlarsen@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Often times the compilers are not able to expand two consecutive 32-bit
writes into one 64-bit on the corresponding architectures. This applies
to xdp_init_buff() called for every received frame (or at least once
per each 64 frames when the frag size is fixed).
Move the not-so-pretty hack from libeth_xdp straight to xdp_init_buff(),
but using a proper union around ::frame_sz and ::flags.
The optimization is limited to LE architectures due to the structure
layout.
One simple example from idpf with the XDP series applied (Clang 22-git,
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE => -O2):
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-27 (-27)
Function old new delta
idpf_vport_splitq_napi_poll 5076 5049 -27
The perf difference with XDP_DROP is around +0.8-1% which I see as more
than satisfying.
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate(). Part of these changes were done
using the Coccinelle semantic patch on the cover letter of this
series, and the rest of the changes were manually done.
omap4_dpll_regm4xen_round_rate() is now only called by
omap4_dpll_regm4xen_determine_rate(), so let's merge that functionality
into one function. This is needed for another cleanup to completely
remove the round_rate() clk ops from the clk core.
Tested-by: Anddreas Kemnade <andreas@kemnade.info> # OMAP3 GTA04, OMAP4 Panda
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
and header file tlv320dac33-plat.h
Remove the tlv320dac33_platform_data struct and header file
tlv320dac33-plat.h as they are not used anywhere in the kernel
or outside this driver.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Message-ID: <20250901184008.1249535-3-alex.t.tran@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It's only used to hold the corresponding receive message, so fix the
name to make that clear and the type so nothing else can be accidentally
assigned to it.
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Getting ready for handling when a BMC is non-responsive or broken, allow
the sender operation to fail in an SMI. If it was a user-generated
message it will return the error.
The powernv code was already doing this internally, but the way it was
written could result in deep stack descent if there were a lot of
messages queued. Have its send return an error in this case.
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Instead of testing the XENFEAT_auto_translated_physmap feature, just
use !xen_pv_domain() which is equivalent.
This has the advantage that a kernel not built with CONFIG_XEN_PV
will be smaller due to dead code elimination.
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250826145608.10352-3-jgross@suse.com>
|
|
Rework xen_pv_domain() to no longer use the xen_domain_type variable,
but the artificial X86_FEATURE_XENPV cpu feature.
On non-x86 architectures xen_pv_domain() can be defined as "0".
This has the advantage that a kernel not built with CONFIG_XEN_PV
will be smaller due to dead code elimination.
Set the X86_FEATURE_XENPV feature very early, as xen_pv_domain() is
used rather early, too.
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250826145608.10352-2-jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"fuse:
- Prevent opening of non-regular backing files.
Fuse doesn't support non-regular files anyway.
- Check whether copy_file_range() returns a larger size than
requested.
- Prevent overflow in copy_file_range() as fuse currently only
supports 32-bit sized copies.
- Cache the blocksize value if the server returned a new value as
inode->i_blkbits isn't modified directly anymore.
- Fix i_blkbits handling for iomap partial writes.
By default i_blkbits is set to PAGE_SIZE which causes iomap to mark
the whole folio as uptodate even on a partial write. But fuseblk
filesystems support choosing a blocksize smaller than PAGE_SIZE
risking data corruption. Simply enforce PAGE_SIZE as blocksize for
fuseblk's internal inode for now.
- Prevent out-of-bounds acces in fuse_dev_write() when the number of
bytes to be retrieved is truncated to the fc->max_pages limit.
virtiofs:
- Fix page faults for DAX page addresses.
Misc:
- Tighten file handle decoding from userns.
Check that the decoded dentry itself has a valid idmapping in the
user namespace.
- Fix mount-notify selftests.
- Fix some indentation errors.
- Add an FMODE_ flag to indicate IOCB_HAS_METADATA availability.
This will be moved to an FOP_* flag with a bit more rework needed
for that to happen not suitable for a fix.
- Don't silently ignore metadata for sync read/write.
- Don't pointlessly log warning when reading coredump sysctls"
* tag 'vfs-6.17-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: virtio_fs: fix page fault for DAX page address
selftests/fs/mount-notify: Fix compilation failure.
fhandle: use more consistent rules for decoding file handle from userns
fuse: Block access to folio overlimit
fuse: fix fuseblk i_blkbits for iomap partial writes
fuse: reflect cached blocksize if blocksize was changed
fuse: prevent overflow in copy_file_range return value
fuse: check if copy_file_range() returns larger than requested size
fuse: do not allow mapping a non-regular backing file
coredump: don't pointlessly check and spew warnings
fs: fix indentation style
block: don't silently ignore metadata for sync read/write
fs: add a FMODE_ flag to indicate IOCB_HAS_METADATA availability
Please enter a commit message to explain why this merge is necessary,
especially if it merges an updated upstream into a topic branch.
|
|
A manual application of this patch resulted in a typo for the stub
function __io_uring_cmd_do_in_task(), for the case where CONFIG_IO_URING
isn't true. Fix that up.
Reported-by: Klara Modin <klarasmodin@gmail.com>
Fixes: df3a7762ee24 ("io_uring/uring_cmd: add io_uring_cmd_tw_t type alias")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are many parameters users might want to query about io_uring like
available request types or the ring sizes. This patch introduces an
interface for such slow path queries.
It was written with several requirements in mind:
- Can be used with or without an io_uring instance. Asking for supported
setup flags before creating an instance as well as qeurying info about
an already created ring are valid use cases.
- Should be moderately fast. For example, users might use it to
periodically retrieve ring attributes at runtime. As a consequence,
it should be able to query multiple attributes in a single syscall.
- Backward and forward compatible.
- Should be reasobably easy to use.
- Reduce the kernel code size for introducing new query types.
It's implemented as a new registration opcode IORING_REGISTER_QUERY.
The user passes one or more query strutctures linked together, each
represented by struct io_uring_query_hdr. The header stores common
control fields needed for processing and points to query type specific
information.
The header contains
- The query type
- The result field, which on return contains the error code for the query
- Pointer to the query type specific information
- The size of the query structure. The kernel will only populate up to
the size, which helps with backward compatibility. The kernel can also
reduce the size, so if the current kernel is older than the inteface
the user tries to use, it'll get only the supported bits.
- next_entry field is used to chain multiple queries.
Apart from common registeration syscall failures, it can only immediately
return an error code in case when the headers are incorrect or any
other addresses and invalid. That usually mean that the userspace
doesn't use the API right and should be corrected. All query type
specific errors are returned in the header's result field.
As an example, the patch adds a single query type for now, i.e.
IO_URING_QUERY_OPCODES, which tells what register / request / etc.
opcodes are supported, but there are particular plans to extend it.
Note: there is a request probing interface via IORING_REGISTER_PROBE,
but it's a mess. It requires the user to create a ring first, it only
works for requests, and requires dynamic allocations.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Tag iterators can race with the freeing of the request pages(tags->page_list),
potentially leading to use-after-free issues.
Defer the freeing of the page list and the tags structure itself until
after an SRCU grace period has passed. This ensures that any concurrent
tag iterators have completed before the memory is released. With this
way, we can replace the big tags->lock in tags iterator code path with
srcu for solving the issue.
This is achieved by:
- Adding a new `srcu_struct tags_srcu` to `blk_mq_tag_set` to protect
tag map iteration.
- Adding an `rcu_head` to `struct blk_mq_tags` to be used with
`call_srcu`.
- Moving the page list freeing logic and the `kfree(tags)` call into a
new callback function, `blk_mq_free_tags_callback`.
- In `blk_mq_free_tags`, invoking `call_srcu` to schedule the new
callback for deferred execution.
The read-side protection for the tag iterators will be added in a
subsequent patch.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are no in-kernel users of spear kbd_platform_data in the kernel,
and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/vppjxui76im26uamznx7evm5lmbe3d6v3oxsa7mqyytykh4zm6@nhlf33v3hp6g
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There are no in-kernel users of pxa27x_keypad_platform_data in the
kernel, and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/20250817215316.1872689-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Implement locking in the hardware monitoring core for drivers using
the _with_info() API functions.
Most hardware monitoring drivers need to support locking to protect
against parallel accesses from userspace. With older API functions, such
locking had to be implemented in the driver code since sysfs attributes
were created by the driver. However, the _with_info() API creates sysfs
attributes in the hardware monitoring core. This makes it easy to move
the locking primitives into that code. This has the benefit of simplifying
driver code while at the same time reducing the risk of incomplete of bad
locking implementations in hardware monitoring drivers.
While this means that all accesses are forced to be synchronized, this
has little if any practical impact since accesses are expected to be low
frequency and are typically synchronized from userspace anyway since
only a single process is accessing the data. On top of that, many drivers
use regmap, which also has its own locking scheme and already serializes
accesses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Move the range_overflows() and range_end_overflows() along with the _t
variants over from drm/i915 and drm/buddy to overflow.h.
Cc: Kees Cook <kees@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250829174601.2163064-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This generic pin config property is confusingly named so let's
rename it to make things clearer.
There are already drivers in the tree that use PIN_CONFIG_OUTPUT
to *read* the value of an output driven pin, which is a big
semantic confusion for the head: are we then reading the
setting of the output or the actual value/level that is put
out on the pin?
We already have PIN_CONFIG_OUTPUT_ENABLE that turns on driver
buffers for output, so this can by logical conclusion only
drive the voltage level if it should be any different.
But if we read the pin, are we then reading the *setting* of
the output value or the *actual* value we can see on the
line?
If the pin has not first been set into output mode with
PIN_CONFIG_OUTPUT_ENABLE, but is instead in some input mode
or tristate, what will reading this property actually
return?
Reading the current users reading this property it is clear
that what we read is the logical level of the pin as 0 or 1
depending on if it is low or high.
Rename it to PIN_CONFIG_LEVEL so it is crystal clear that
we set or read the voltage level of the pin and nothing else.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The name of the pin function has no real meaning to pinctrl core and is
there only for human readability of device properties. Some pins are
muxed as GPIOs but for "strict" pinmuxers it's impossible to request
them as GPIOs if they're bound to a devide - even if their function name
explicitly says "gpio". Add a new field to struct pinfunction that
allows to pass additional flags to pinctrl core. While we could go with
a boolean "is_gpio" field, a flags field is more future-proof.
If the PINFUNCTION_FLAG_GPIO is set for a given function, the pin muxed
to it can be requested as GPIO even on strict pin controllers. Add a new
callback to struct pinmux_ops - function_is_gpio() - that allows pinmux
core to inspect a function and see if it's a GPIO one. Provide a generic
implementation of this callback.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Provide a function similar to devm_strdup_const() but for copying blocks
of memory that are likely to be placed in .rodata.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The previous patch introduced a 64-bit timestamp ioctl
(SNDRV_COMPRESS_TSTAMP64). To provide a consistent API, this patch
adds a corresponding 64-bit version of the SNDRV_COMPRESS_AVAIL ioctl.
A new struct snd_compr_avail64 is added to the UAPI, which includes
the 64-bit timestamp. The existing ioctl implementation is refactored
to handle both the 32-bit and 64-bit variants.
Reviewed-by: Miller Liang <millerliang@google.com>
Tested-by: Joris Verhaegen <verhaegen@google.com>
Signed-off-by: Joris Verhaegen <verhaegen@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250905091301.2711705-4-verhaegen@google.com
|
|
The previous patch introduced the internal infrastructure for handling
64-bit timestamps. This patch exposes this capability to user-space.
Define the new ioctl command SNDRV_COMPRESS_TSTAMP64, which allows
applications to fetch the overflow-safe struct snd_compr_tstamp64.
The ioctl dispatch table is updated to handle the new command by
calling a new snd_compr_tstamp64 handler, while the legacy path is
renamed to snd_compr_tstamp32 for clarity.
This patch bumps the SNDRV_COMPRESS_VERSION to 0.4.0.
Reviewed-by: Miller Liang <millerliang@google.com>
Tested-by: Joris Verhaegen <verhaegen@google.com>
Signed-off-by: Joris Verhaegen <verhaegen@google.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250905091301.2711705-3-verhaegen@google.com
|
|
The copied_total field in struct snd_compr_tstamp is a 32-bit
value that can overflow on long-running high-bitrate streams,
leading to incorrect calculations for buffer availablility.
This patch adds a 64-bit safe timestamping mechanism.
A new UAPI struct, snd_compr_tstamp64, is added which uses 64-bit
types for byte counters. The relevant ops structures across the
ASoC and core compress code are updated to use this new struct.
ASoC drivers are updated to use u64 counters.
Internal timestamps being u64 now, a compatibility function is added
to convert the 64-bit timestamp back to the 32-bit format for legacy
ioctl callers.
Reviewed-by: Miller Liang <millerliang@google.com>
Tested-by: Joris Verhaegen <verhaegen@google.com>
Signed-off-by: Joris Verhaegen <verhaegen@google.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250905091301.2711705-2-verhaegen@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 6.17-rc5
|
|
Many chips require 64-bit variables to display the accumulated energy,
even more so since the energy units are micro-Joule. Add new sensor type
"energy64" to support reporting the chip energy as 64-bit values.
Changing the entire hardware monitoring API is not feasible, and it is only
really necessary to support reading 64-bit values for the "energyX_input"
attribute. For this reason, keep the API as-is and use type casts on both
ends to pass 64-bit pointers when reading the accumulated energy. On the
write side (which is only useful for the energyX_enable attribute), keep
passing the written value as long.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a severe slowdown regression in the timer vDSO code related to the
while() loop in __iter_div_u64_rem(), when the AUX-clock is enabled"
* tag 'timers-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/vsyscall: Avoid slow division loop in auxiliary clock update
|
|
Add clock management unit bindings for PERIC0 and PERIC1 blocks
which provide clocks for USI, I2C and UART peripherals.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
