| Age | Commit message (Collapse) | Author | Lines |
|---|
|
One additional PCI ID is added in Bspec for BMG, Add it so that
driver recognizes this device with this new ID.
Bspec: 68090
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Vodapalli, Ravi Kumar <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250704103527.100178-1-ravi.kumar.vodapalli@intel.com
|
|
Architecture's using perf events for hard lockup detection needs to
convert the watchdog_thresh to the event's period, some architecture
for example arm64 perform this conversion using the CPU's maximum
frequency which will be acquired by cpufreq. However by the time
the lockup detector's initialized the cpufreq driver may not be
initialized, thus launch a watchdog with inaccurate period. Provide
a function hardlockup_detector_perf_adjust_period() to allowing
adjust the event period. Then architecture can update with more
accurate period if cpufreq is initialized.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250701110214.27242-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These bindings will be used for the SCMI voltage domain.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-3-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
With the renaming of libata-eh ata_set_mode() function to
ata_eh_set_mode(), libata-core function ata_do_set_mode() can now be
renamed to the simpler ata_set_mode().
All the call sites of the former ata_do_set_mode() are updated to use
the new function name.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250703103622.291272-5-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The function ata_log_supported() tests if a log page is supported by a
device using the General Purpose Log Directory log page, which lists the
size of all surported log pages. However, this log page is read from the
device using ata_read_log_page() every time ata_log_supported() is
called. That is not necessary.
Avoid reading the General Purpose Log Directory log page by caching its
content in the gp_log_dir buffer defined as part of struct ata_device.
The functions ata_read_log_directory() and ata_clear_log_directory() are
introduced to manage this buffer. ata_clear_log_directory() zero-fill
the gp_log_dir buffer every time ata_dev_configure() is called, that is,
when the device is first scanned and when it is being revalidated.
The function ata_log_supported() is modified to call
ata_read_log_directory() instead of ata_read_log_page().
The function ata_read_log_directory() calls ata_read_log_page() to read
the General Purpose Log Directory log page from the device only if the
first 16-bits word of the log is not equal to 0x0001, that is, it is not
equal to the ACS mandated value for the log version.
With this, the log page is read from the device only once for every
ata_dev_configure() call. For instance, with pr_debug enabled, a call
to ata_dev_configure() before this patch generates the following log
page accesses:
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x13, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x12, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x8
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x3
ata3.00: read log page - log 0x30, page 0x4
ata3.00: read log page - log 0x18, page 0x0
That is, the general purpose log directory page is read 7 times.
With this patch applied, the number of accesses to this log page is
reduced to one:
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x13, page 0x0
ata3.00: read log page - log 0x12, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x8
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x3
ata3.00: read log page - log 0x30, page 0x4
ata3.00: read log page - log 0x18, page 0x0
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250703103622.291272-2-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Fix whitespace/formatting errors.
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: David Rheinsberg <david@readahead.eu>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/20250703222314.309967-5-aleksandr.mikhalitsyn@canonical.com
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc5).
No conflicts.
No adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a 'struct bpf_scc_callchain callchain_buf' field in bpf_verifier_env.
This way, the previous bpf_scc_callchain local variables can be
replaced by taking address of env->callchain_buf. This can reduce stack
usage and fix the following error:
kernel/bpf/verifier.c:19921:12: error: stack frame size (1368) exceeds limit (1280) in 'do_check'
[-Werror,-Wframe-larger-than]
Reported-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250703141117.1485108-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a kernel function which is the analogue of dump_stack()
printing some useful information and the stack trace. This is not
exposed to BPF programs yet, but can be made available in the future.
When we have a program counter for a BPF program in the stack trace,
also additionally output the filename and line number to make the trace
helpful. The rest of the trace can be passed into ./decode_stacktrace.sh
to obtain the line numbers for kernel symbols.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In preparation of figuring out the closest program that led to the
current point in the kernel, implement a function that scans through the
stack trace and finds out the closest BPF program when walking down the
stack trace.
Special care needs to be taken to skip over kernel and BPF subprog
frames. We basically scan until we find a BPF main prog frame. The
assumption is that if a program calls into us transitively, we'll
hit it along the way. If not, we end up returning NULL.
Contextually the function will be used in places where we know the
program may have called into us.
Due to reliance on arch_bpf_stack_walk(), this function only works on
x86 with CONFIG_UNWINDER_ORC, arm64, and s390. Remove the warning from
arch_bpf_stack_walk as well since we call it outside bpf_throw()
context.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prepare a function for use in future patches that can extract the file
info, line info, and the source line number for a given BPF program
provided it's program counter.
Only the basename of the file path is provided, given it can be
excessively long in some cases.
This will be used in later patches to print source info to the BPF
stream.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for a stream API to the kernel and expose related kfuncs to
BPF programs. Two streams are exposed, BPF_STDOUT and BPF_STDERR. These
can be used for printing messages that can be consumed from user space,
thus it's similar in spirit to existing trace_pipe interface.
The kernel will use the BPF_STDERR stream to notify the program of any
errors encountered at runtime. BPF programs themselves may use both
streams for writing debug messages. BPF library-like code may use
BPF_STDERR to print warnings or errors on misuse at runtime.
The implementation of a stream is as follows. Everytime a message is
emitted from the kernel (directly, or through a BPF program), a record
is allocated by bump allocating from per-cpu region backed by a page
obtained using alloc_pages_nolock(). This ensures that we can allocate
memory from any context. The eventual plan is to discard this scheme in
favor of Alexei's kmalloc_nolock() [0].
This record is then locklessly inserted into a list (llist_add()) so
that the printing side doesn't require holding any locks, and works in
any context. Each stream has a maximum capacity of 4MB of text, and each
printed message is accounted against this limit.
Messages from a program are emitted using the bpf_stream_vprintk kfunc,
which takes a stream_id argument in addition to working otherwise
similar to bpf_trace_vprintk.
The bprintf buffer helpers are extracted out to be reused for printing
the string into them before copying it into the stream, so that we can
(with the defined max limit) format a string and know its true length
before performing allocations of the stream element.
For consuming elements from a stream, we expose a bpf(2) syscall command
named BPF_PROG_STREAM_READ_BY_FD, which allows reading data from the
stream of a given prog_fd into a user space buffer. The main logic is
implemented in bpf_stream_read(). The log messages are queued in
bpf_stream::log by the bpf_stream_vprintk kfunc, and then pulled and
ordered correctly in the stream backlog.
For this purpose, we hold a lock around bpf_stream_backlog_peek(), as
llist_del_first() (if we maintained a second lockless list for the
backlog) wouldn't be safe from multiple threads anyway. Then, if we
fail to find something in the backlog log, we splice out everything from
the lockless log, and place it in the backlog log, and then return the
head of the backlog. Once the full length of the element is consumed, we
will pop it and free it.
The lockless list bpf_stream::log is a LIFO stack. Elements obtained
using a llist_del_all() operation are in LIFO order, thus would break
the chronological ordering if printed directly. Hence, this batch of
messages is first reversed. Then, it is stashed into a separate list in
the stream, i.e. the backlog_log. The head of this list is the actual
message that should always be returned to the caller. All of this is
done in bpf_stream_backlog_fill().
From the kernel side, the writing into the stream will be a bit more
involved than the typical printk. First, the kernel typically may print
a collection of messages into the stream, and parallel writers into the
stream may suffer from interleaving of messages. To ensure each group of
messages is visible atomically, we can lift the advantage of using a
lockless list for pushing in messages.
To enable this, we add a bpf_stream_stage() macro, and require kernel
users to use bpf_stream_printk statements for the passed expression to
write into the stream. Underneath the macro, we have a message staging
API, where a bpf_stream_stage object on the stack accumulates the
messages being printed into a local llist_head, and then a commit
operation splices the whole batch into the stream's lockless log list.
This is especially pertinent for rqspinlock deadlock messages printed to
program streams. After this change, we see each deadlock invocation as a
non-interleaving contiguous message without any confusion on the
reader's part, improving their user experience in debugging the fault.
While programs cannot benefit from this staged stream writing API, they
could just as well hold an rqspinlock around their print statements to
serialize messages, hence this is kept kernel-internal for now.
Overall, this infrastructure provides NMI-safe any context printing of
messages to two dedicated streams.
Later patches will add support for printing splats in case of BPF arena
page faults, rqspinlock deadlocks, and cond_break timeouts, and
integration of this facility into bpftool for dumping messages to user
space.
[0]: https://lore.kernel.org/bpf/20250501032718.65476-1-alexei.starovoitov@gmail.com
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Refactor code to be able to get and put bprintf buffers and use
bpf_printf_prepare independently. This will be used in the next patch to
implement BPF streams support, particularly as a staging buffer for
strings that need to be formatted and then allocated and pushed into a
stream.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Alexei suggested, 'link_type' can be more precise and differentiate
for human in fdinfo. In fact BPF_LINK_TYPE_KPROBE_MULTI includes
kretprobe_multi type, the same as BPF_LINK_TYPE_UPROBE_MULTI, so we
can show it more concretely.
link_type: kprobe_multi
link_id: 1
prog_tag: d2b307e915f0dd37
...
link_type: kretprobe_multi
link_id: 2
prog_tag: ab9ea0545870781d
...
link_type: uprobe_multi
link_id: 9
prog_tag: e729f789e34a8eca
...
link_type: uretprobe_multi
link_id: 10
prog_tag: 7db356c03e61a4d4
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250702153958.639852-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.17:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- bridge: More reference counting
- dp: Implement backlight control helpers
- fourcc: Add half-float and 32b float formats, RGB161616, BGR161616
- mipi-dsi: Drop MIPI_DSI_MODE_VSYNC_FLUSH flag
- ttm: Improve eviction
Driver Changes:
- i915: Use backlight control helpers for eDP
- tidss: Add AM65x OLDI bridge support
- panels:
- panel-edp: Add CMN N116BCJ-EAK support
- raydium-rm67200: misc cleanups, optional reset
- new panel: DJN HX83112B
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250703-chirpy-lilac-dalmatian-2c5838@houat
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc5:
- Replace simple panel lookup hack with proper fix.
- nullpointer deref in vesadrm fix.
- fix dma_resv_wait_timeout.
- fix error handling in ttm_buffer_object_transfer.
- bridge fixes.
- Fix vmwgfx accidentally allocating encrypted memory.
- Fix race in spsc_queue_push()
- Add refcount on backing GEM objects during fb creation.
- Fix v3d irq's being enabled during gpu reset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/a7461418-08dc-4b7c-b2fa-264155f66d5e@linux.intel.com
|
|
Rather than returning ERR_PTR or NULL on failure, replace the NULL
return with ERR_PTR(-ENOMEM). This simplifies error handling at the
caller. While here, add kernel documentation for
drmm_alloc_ordered_workqueue.
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250702232831.3271328-2-matthew.brost@intel.com
|
|
hci_conn_hash_lookup_big_state
The check for destination to be BDADDR_ANY is no longer necessary with
the introduction of BIS_LINK.
Fixes: 23205562ffc8 ("Bluetooth: separate CIS_LINK and BIS_LINK link types")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The CSI SCLK clock is incorrectly called CSI1 SCLK while it is used for
both the CSI0 and CSI1 interfaces and is called CSI SCLK all around the
documentation.
Fix the name in the driver, header and device-tree.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add a new reset_name field to the spacemit_ccu_data structure. If it is
non-null, the CCU implements a reset controller, and the name will be
used in the name for the auxiliary device that implements it.
Define a new type to hold an auxiliary device as well as the regmap
pointer that will be needed by CCU reset controllers. Set up code to
initialize and add an auxiliary device for any CCU that implements reset
functionality.
Make it optional for a CCU to implement a clock controller. This
doesn't apply to any of the existing CCUs but will for some new ones
that will be added soon.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-4-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Move the definitions of register offsets and fields used by the SpacemiT
K1 SoC CCUs into a separate header file, so that they can be shared by
the reset driver that will be found under drivers/reset.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-3-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Enhance the existing SCMI transfer tracepoints by including the current
in-flight transfer count in `scmi_xfer_begin` and `scmi_xfer_end`.
Introduce a new helper `scmi_inflight_count()` to retrieve the active
transfer count from the SCMI debug counters when debug is enabled.
This trace data is useful for visualizing transfer activity over time
and identifying congestion or unexpected behavior in SCMI messaging.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-4-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.17, please pull the following:
- Linus updates the 64-bit BCMBCA SoCs Device Tree with the common
peripherals that exit as well as correct IRQ assignments
- Andrea adds support for the RP1 companion chip on the Raspberry Pi 5
systems with clocks, gpios, pinctrl, all of that using an overlay to
describe those peripherals
- Rob drops the interrupt-parent property from the GICv2M node on
Northstar2 SoCs
* tag 'arm-soc/for-6.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: northstar2: Drop GIC V2M "interrupt-parent"
arm64: dts: broadcom: Add overlay for RP1 device
arm64: dts: broadcom: Add board DTS for Rpi5 which includes RP1 node
arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
arm64: dts: rp1: Add support for RaspberryPi's RP1 device
dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
ARM64: dts: bcm63158: Add BCMBCA peripherals
ARM64: dts: bcm6858: Add BCMBCA peripherals
ARM64: dts: bcm6856: Add BCMBCA peripherals
ARM64: dts: bcm4908: Add BCMBCA peripherals
Link: https://lore.kernel.org/r/20250630190216.1518354-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a new flag, called strict_midlayer, to struct dev_pm_info, along
with helper functions for updating and reading its value, to allow
middle layer code that provides proper callbacks for device suspend-
resume during system-wide PM transitions to let pm_runtime_force_suspend()
and and pm_runtime_force_resume() know that they should only invoke
runtime PM callbacks coming from the device's driver.
Namely, if this flag is set, pm_runtime_force_suspend() and
and pm_runtime_force_resume() will invoke runtime PM callbacks
provided by the device's driver directly with the assumption that
they have been called via a middle layer callback for device suspend
or resume, respectively.
For instance, acpi_general_pm_domain provides specific
callback functions for system suspend, acpi_subsys_suspend(),
acpi_subsys_suspend_late() and acpi_subsys_suspend_noirq(), and
it does not expect its runtime suspend callback function,
acpi_subsys_runtime_suspend(), to be invoked at any point during
system suspend. In particular, it does not expect that function
to be called from within any of the system suspend callback functions
mentioned above which would happen if a device driver collaborating
with acpi_general_pm_domain used pm_runtime_force_suspend() as its
callback function for any system suspend phase later than "prepare".
The new flag allows this expectation of acpi_general_pm_domain to
be formally expressed, which is going to be done subsequently.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/24017035.6Emhk5qWAg@rjwysocki.net
|
|
Since pm_runtime_force_resume() and pm_runtime_need_not_resume() are only
needed for handling system-wide PM transitions, there is no reason to
compile them in if CONFIG_PM_SLEEP is unset.
Accordingly, move them under CONFIG_PM_SLEEP and make the static
inline stub for pm_runtime_force_resume() return an error to indicate
that it should not be used outside CONFIG_PM_SLEEP.
Putting pm_runtime_force_resume() also allows subsequent changes to
be more straightforward because this function is going to access a
device PM flag that is only defined when CONFIG_PM_SLEEP is set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3384523.aeNJFYEL58@rjwysocki.net
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250626154244.324265-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are additional SpacemiT syscon CCUs whose registers control both
clocks and resets: RCPU, RCPU2, and APBC2. Unlike those defined
previously, these will (initially) support only resets. They do not
incorporate power domain functionality.
Previously the clock properties were required for all compatible nodes.
Make that requirement only apply to the three existing CCUs (APBC, APMU,
and MPMU), so that the new reset-only CCUs can go without specifying them.
Define the index values for resets associated with all SpacemiT K1
syscon nodes, including those with clocks already defined, as well as
the new ones (without clocks).
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-2-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add device pointer to irq_domain_info and msi_domain_info, so that the device
can be specified at domain creation time.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/943e52403b20cf13c320d55bd4446b4562466aab.1750860131.git.namcao@linutronix.de
|
|
The inlined ptp_read_system_[pre|post]ts() switch cases expand to a copious
amount of text in drivers, e.g. ~500 bytes in e1000e. Adding auxiliary
clock support to the inlines would increase it further.
Replace the inline switch case with a call to ktime_get_clock_ts64(), which
reduces the code size in drivers and allows to access auxiliary clocks once
they are enabled in the IOCTL parameter filter.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20250701132628.426168092@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Base implementation for PTP with a temporary CLOCK_AUX* workaround to
allow integration of depending changes into the networking tree.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ktime_get_clock_ts64() was provided for the networking tree as a stand
alone commit based on v6.16-rc1. It contains a temporary workaround for the
CLOCK_AUX* defines, which are only available in the timekeeping tree.
As this commit is now merged into the timers/ptp branch, which contains the
real CLOCK_AUX* defines, the workaround is obsolete.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250701130923.579834908@linutronix.de
|
|
Pull the base implementation of ktime_get_clock_ts64() for PTP, which
contains a temporary CLOCK_AUX* workaround. That was created to allow
integration of depending changes into the networking tree. The workaround
is going to be removed in a subsequent change in the timekeeping tree.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
PTP implements an inline switch case for taking timestamps from various
POSIX clock IDs, which already consumes quite some text space. Expanding it
for auxiliary clocks really becomes too big for inlining.
Provide a out of line version.
The function invalidates the timestamp in case the clock is invalid. The
invalidation allows to implement a validation check without the need to
propagate a return value through deep existing call chains.
Due to merge logistics this temporarily defines CLOCK_AUX[_LAST] if
undefined, so that the plain branch, which does not contain any of the core
timekeeper changes, can be pulled into the networking tree as prerequisite
for the PTP side changes. These temporary defines are removed after that
branch is merged into the tip::timers/ptp branch. That way the result in
-next or upstream in the next merge window has zero dependencies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250701132628.357686408@linutronix.de
|
|
The system manager indices names are different for each platform, rename
the indices for i.MX95 to differentiate with other platform.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX94, the MQS2 also needs to be configured by SCMI interface, add
sm_index variable in struct fsl_mqs_soc_data to distinguish the MQS1 and
MQS2 on this platform.
Add the system manager indices for i.MX94 in the header file.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.16
Couple of fixes to address:
1. The safety and memory issues in the FF-A notification callback handler:
The fixes replaces a mutex with an rwlock to prevent sleeping in atomic
context, resolving kernel warnings. Memory allocation is moved outside
the lock to support this transition safely. Additionally, a memory leak
in the notifier unregistration path is fixed by properly freeing the
callback node.
2. The missing entry in struct ffa_indirect_msg_hdr:
The fix adds the missing 32 bit reserved entry in the structure as
required by the FF-A specification.
* tag 'ffa-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the missing entry in struct ffa_indirect_msg_hdr
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
firmware: arm_ffa: Move memory allocation outside the mutex locking
firmware: arm_ffa: Fix memory leak by freeing notifier callback node
Link: https://lore.kernel.org/r/20250609105207.1185570-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DCCP socket family has now been removed from this tree, see:
8bb3212be4b4 ("Merge branch 'net-retire-dccp-socket'")
Remove connection tracking and NAT support for this protocol, this
should not pose a problem because no DCCP traffic is expected to be seen
on the wire.
As for the code for matching on dccp header for iptables and nftables,
mark it as deprecated and keep it in place. Ruleset restoration is an
atomic operation. Without dccp matching support, an astray match on dccp
could break this operation leaving your computer with no policy in
place, so let's follow a more conservative approach for matches.
Add CONFIG_NFT_EXTHDR_DCCP which is set to 'n' by default to deprecate
dccp extension support. Similarly, label CONFIG_NETFILTER_XT_MATCH_DCCP
as deprecated too and also set it to 'n' by default.
Code to match on DCCP protocol from ebtables also remains in place, this
is just a few checks on IPPROTO_DCCP from _check() path which is
exercised when ruleset is loaded. There is another use of IPPROTO_DCCP
from the _check() path in the iptables multiport match. Another check
for IPPROTO_DCCP from the packet in the reject target is also removed.
So let's schedule removal of the dccp matching for a second stage, this
should not interfer with the dccp retirement since this is only matching
on the dccp header.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, Input and PWM due for the v6.17 merge window
|
|
feature
Introduce a new API, intel_pmt_get_regions_by_feature(), that gathers
telemetry regions based on a provided capability flag. This API enables
retrieval of regions with various capabilities (for example, RMID-based
telemetry) and provides a unified interface for accessing them. Resource
management is handled via reference counting using
intel_pmt_put_feature_group().
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-15-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add intel_pmt_get_features() in PMT Discovery to enable the PMT Telemetry
driver to obtain attributes of the aggregated telemetry spaces it
enumerates. The function gathers feature flags and associated data (like
the number of RMIDs) from each PMT entry, laying the groundwork for a
future kernel interface that will allow direct access to telemetry regions
based on their capabilities.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-14-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add functions, intel_vsec_set/get_mapping(), to set and retrieve the
OOBMSM-to-CPU mapping data in the private data of the parent Intel VSEC
driver. With this mapping information available, other Intel VSEC features
on the same OOBMSM device can easily access and use the mapping data,
allowing each of the OOBMSM features to map to the CPUs they provides data
for.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-12-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The TPMI platform information provides a mapping of OOBMSM PCI devices to
logical CPUs. Since this mapping is consistent across all OOBMSM features
(e.g., TPMI, PMT, SDSi), it can be leveraged by multiple drivers. To
facilitate reuse, relocate the struct intel_tpmi_plat_info to intel_vsec.h,
renaming it to struct oobmsm_plat_info, making it accessible to other
features. While modifying headers, place them in alphabetical order.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-11-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This patch introduces a new driver to enumerate and expose Intel Platform
Monitoring Technology (PMT) capabilities via a simple discovery mechanism.
The PMT Discovery driver parses hardware-provided discovery tables from
Intel Out of Band Management Services Modules (OOBMSM) and extracts feature
information for various providers (such as TPMI, Telemetry, Crash Log,
etc). This unified interface simplifies the process of determining which
manageability and telemetry features are supported by a given platform.
This new feature is described in the Intel Platform Monitoring Technology
3.0 specification, section 6.6 Capability.
Key changes and additions:
New file drivers/platform/x86/intel/pmt/discovery.c:
– Implements the discovery logic to map the discovery resource, read
the feature discovery table, and validate feature parameters.
New file drivers/platform/x86/intel/pmt/features.c:
– Defines feature names, layouts, and associated capability masks.
– Provides a mapping between raw hardware attributes and sysfs
representations for easier integration with user-space tools.
New header include/linux/intel_pmt_features.h:
– Declares constants, masks, and feature identifiers used across the
PMT framework.
Sysfs integration:
– Feature attributes are exposed under /sys/class/intel_pmt.
– Each device is represented by a subfolder within the intel_pmt class,
named using its DBDF (Domain:Bus:Device.Function), e.g.:
features-0000:00:03.1
– Example directory layout for a device:
/sys/class/intel_pmt/features-0000:00:03.1/
├── accelerator_telemetry
├── crash_log
├── per_core_environment_telemetry
├── per_core_performance_telemetry
├── per_rmid_energy_telemetry
├── per_rmid_perf_telemetry
├── tpmi_control
├── tracing
└── uncore_telemetry
By exposing PMT feature details through sysfs and integrating with the
existing PMT class, this driver paves the way for more streamlined
integration of PMT-based manageability and telemetry tools.
Link: https://www.intel.com/content/www/us/en/content-details/710389/intel-platform-monitoring-technology-intel-pmt-external-specification.html
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-9-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add the PCIe VSEC ID for new Intel Platform Monitoring Technology
Capability Discovery feature. Discovery provides detailed information for
the various Intel VSEC features. Also make the driver a supplier for
TPMI and Telemetry drivers which will use the information.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-8-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
New Intel VSEC features will have dependencies on other features, requiring
certain supplier drivers to be probed before their consumers. To enforce
this dependency ordering, introduce device links using device_link_add(),
ensuring that suppliers are fully registered before consumers are probed.
- Add device link tracking by storing supplier devices and tracking their
state.
- Implement intel_vsec_link_devices() to establish links between suppliers
and consumers based on feature dependencies.
- Add get_consumer_dependencies() to retrieve supplier-consumer
relationships.
- Modify feature registration logic:
* Consumers now check that all required suppliers are registered before
being initialized.
* suppliers_ready() verifies that all required supplier devices are
available.
- Prevent potential null consumer name issue in sysfs:
- Use dev_set_name() when creating auxiliary devices to ensure a
unique, non-null consumer name.
- Update intel_vsec_pci_probe() to loop up to the number of possible
features or when all devices are registered, whichever comes first.
- Introduce VSEC_CAP_UNUSED to prevent sub-features (registered via
exported APIs) from being mistakenly linked.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Renesas Camera Receiver Unit in the RZ/V2H SoC can output RAW
data captured from an image sensor without conversion to an RGB/YUV
format. In that case the data are packed into 64-bit blocks, with a
variable amount of padding in the most significant bits depending on
the bitdepth of the data. Add new V4L2 pixel format codes for the new
formats, along with documentation to describe them.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250630222734.2712390-1-dan.scally@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Use the clamp() function from minmax.h and provide a define for the max
sizes as they will be used in subsequent patches.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Callers couldn't care less which dentry did we get - anything
valid is treated as success.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instead of returning a dentry or ERR_PTR(-E...), return 0 and store
dentry into pipe->dentry on success and return -E... on failure.
Callers are happier that way...
NOTE: dummy rpc_pipe is getting ->dentry set; we never access that,
since we
1) never call rpc_unlink() for it (dentry is taken out by
->kill_sb())
2) never call rpc_queue_upcall() for it (writing to that
sucker fails; no downcalls are ever submitted, so no replies are
going to arrive)
IOW, having that ->dentry set (and left dangling) is harmless,
if ugly; cleaner solution will take more massage.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
1) pass it pipe instead of pipe->dentry
2) zero pipe->dentry afterwards
3) it always returns 0; why bother?
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
