| Age | Commit message (Collapse) | Author | Lines |
|---|
|
driver
In the case of SME-in-driver, the driver can internally choose to
update the links based on the AP MLD recommendation and do link
reconfiguration negotiation with AP MLD.
(e.g., After the driver processing the BSS Transition Management request
frame received from the AP MLD with Neighbor Report containing
Multi-Link element with recommended links information chooses to do link
reconfiguration negotiation with AP MLD).
To support this, extend cfg80211_mlo_reconf_add_done() and
NL80211_CMD_ASSOC_MLO_RECONF to indicate added links information for
driver-initiated link reconfiguration requests. For removed links,
the driver indicates links information using the
NL80211_CMD_LINKS_REMOVED event for driver-initiated cases, the same as
supplicant initiated cases.
For the driver-initiated case, cfg80211 will receive link
reconfiguration result asynchronously from driver so holding BSSes of
the accepted add links is needed in the event path. Also, no need of
unhold call for the rejected add link BSSes since there was no hold call
happened previously.
Once the supplicant receives the NL80211_CMD_ASSOC_MLO_RECONF event,
it needs to process the information about newly added links and install
per-link group keys (e.g., GTK/IGTK/BIGTK etc.).
In case of the SME-in-driver, using a vendor interface etc. to notify
the supplicant to initiate a link reconfiguration request and then
supplicant sending command to the cfg80211 can lead to race conditions.
The correct design to avoid this is that the driver indicates the
cfg80211 directly with the results of the link reconfiguration
negotiation.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-3-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The existing documentation for the NL80211_CMD_ASSOC_MLO_RECONF
does not clearly explain handling of link reconfiguration request
results from the driver.
Add documentation to explain that the command is used as an event to
notify userspace about added links information, and that the existing
NL80211_CMD_LINKS_REMOVED command is used to notify userspace about
removed links information.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-2-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio
index corresponding to a given channel in a multi-radio wiphy.
This utility function can be used when we want to check the radio-specific
data for a channel in a multi-radio wiphy. For example, it can help
determine the radio index required to handle a scan request. This index
can then be used to decide whether the scan can proceed without
interfering with ongoing DFS operations on another radio.
Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Drivers that support Tx power insertion could examine the outgoing Radio
measurement packet and depending on the packet type, the driver can
insert specific data fields in it. These action field values will help
drivers classify the action code within the Radio Measurement action
packet.
These action fields are defined in IEEE 802.11-2024 - Table 9-470, Radio
Measurement Action field values.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-add_rrm_action_code-v1-1-6b7c78b5bbaf@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash (broken fallback finup) and
reinstates a Kconfig option to control the extra self-tests"
* tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Fix infinite recursion in ahash_def_finup
crypto: testmgr - reinstate kconfig control over full self-tests
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.17:
UAPI Changes:
- Add Task Information for the wedge API
Cross-subsystem Changes:
Core Changes:
- Fix warnings related to export.h
- fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures
- fence: Fix UAF issues
- format-helper: Improve tests
Driver Changes:
- ivpu: Add turbo flag, Add Wildcat Lake Support
- rz-du: Improve MIPI-DSI Support
- vmwgfx: fence improvement
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250619-perfect-industrious-whippet-8ed3db@houat
|
|
Add helpers to get the device or device_node associated with clk_hw.
This can be used by clock drivers to access various device related
functionality such as devres, dev_ prints, etc ...
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250417-clk-hw-get-helpers-v1-1-7743e509612a@baylibre.com
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
'ref_tracker-add-ability-to-register-a-debugfs-file-for-a-ref_tracker_dir'
Jeff Layton says:
====================
ref_tracker: add ability to register a debugfs file for a ref_tracker_dir
For those just joining in, this series adds a new top-level
"ref_tracker" debugfs directory, and has each ref_tracker_dir register a
file in there as part of its initialization. It also adds the ability to
register a symlink with a more human-usable name that points to the
file, and does some general cleanup of how the ref_tracker object names
are handled.
v14: https://lore.kernel.org/20250610-reftrack-dbgfs-v14-0-efb532861428@kernel.org
v13: https://lore.kernel.org/20250603-reftrack-dbgfs-v13-0-7b2a425019d8@kernel.org
v12: https://lore.kernel.org/20250529-reftrack-dbgfs-v12-0-11b93c0c0b6e@kernel.org
v11: https://lore.kernel.org/20250528-reftrack-dbgfs-v11-0-94ae0b165841@kernel.org
v10: https://lore.kernel.org/20250527-reftrack-dbgfs-v10-0-dc55f7705691@kernel.org
v9: https://lore.kernel.org/20250509-reftrack-dbgfs-v9-0-8ab888a4524d@kernel.org
v8: https://lore.kernel.org/20250507-reftrack-dbgfs-v8-0-607717d3bb98@kernel.org
v7: https://lore.kernel.org/20250505-reftrack-dbgfs-v7-0-f78c5d97bcca@kernel.org
v6: https://lore.kernel.org/20250430-reftrack-dbgfs-v6-0-867c29aff03a@kernel.org
v5: https://lore.kernel.org/20250428-reftrack-dbgfs-v5-0-1cbbdf2038bd@kernel.org
v4: https://lore.kernel.org/20250418-reftrack-dbgfs-v4-0-5ca5c7899544@kernel.org
v3: https://lore.kernel.org/20250417-reftrack-dbgfs-v3-0-c3159428c8fb@kernel.org
v2: https://lore.kernel.org/20250415-reftrack-dbgfs-v2-0-b18c4abd122f@kernel.org
v1: https://lore.kernel.org/20250414-reftrack-dbgfs-v1-0-f03585832203@kernel.org
====================
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-0-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have dentries and the ability to create meaningful symlinks
to them, don't keep a name string in each tracker. Switch the output
format to print "class@address", and drop the name field.
Also, add a kerneldoc header for ref_tracker_dir_init().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-9-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability for a subsystem to add a user-friendly symlink that
points to a ref_tracker_dir's debugfs file. Add a separate
debugfs_symlinks xarray and use that to track symlinks. The reaper
workqueue job will remove symlinks before their corresponding dentries.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-7-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, there is no convenient way to see the info that the
ref_tracking infrastructure collects. Attempt to create a file in
debugfs when called from ref_tracker_dir_init().
The file is given the name "class@%px", as having the unmodified address
is helpful for debugging. This should be safe since this directory is only
accessible by root
While ref_tracker_dir_init() is generally called from a context where
sleeping is OK, ref_tracker_dir_exit() can be called from anywhere.
Thus, dentry cleanup must be handled asynchronously.
Add a new global xarray that has entries with the ref_tracker_dir
pointer as the index and the corresponding debugfs dentry pointer as the
value. Instead of removing the debugfs dentry, have
ref_tracker_dir_exit() set a mark on the xarray entry and schedule a
workqueue job. The workqueue job then walks the xarray looking for
marked entries, and removes their xarray entries and the debugfs
dentries.
Because of this, the debugfs dentry can outlive the corresponding
ref_tracker_dir. Have ref_tracker_debugfs_show() take extra care to
ensure that it's safe to dereference the dir pointer before using it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-6-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A later patch in the series will be adding debugfs files for each
ref_tracker that get created in ref_tracker_dir_init(). The format will
be "class@%px". The current "name" string can vary between
ref_tracker_dir objects of the same type, so it's not suitable for this
purpose.
Add a new "class" string to the ref_tracker dir that describes the
the type of object (sans any individual info for that object).
Also, in the i915 driver, gate the creation of debugfs files on whether
the dentry pointer is still set to NULL. CI has shown that the
ref_tracker_dir can be initialized more than once.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-4-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a later patch, we'll be adding a 3rd mechanism for outputting
ref_tracker info via seq_file. Instead of a conditional, have the caller
set a pointer to an output function in struct ostream. As part of this,
the log prefix must be explicitly passed in, as it's too late for the
pr_fmt macro.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-3-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the dev_dstats_rx_dropped_add() helper to allow incrementing
the rx_drops per-CPU statistic by an arbitrary value, rather than just
one. This is useful for drivers or code paths that need to account for
multiple dropped packets at once, such as when dropping entire queues.
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-3-19fe0d35e28e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As discussesd before in [0] proxy entries (which are more configuration
than runtime data) should stay when the link (carrier) goes does down.
This is what happens for regular neighbour entries.
So lets fix this by:
- storing in proxy entries the fact that it was added as NUD_PERMANENT
- not removing NUD_PERMANENT proxy entries when the carrier goes down
(same as how it's done in neigh_flush_dev() for regular neigh entries)
[0]: https://lore.kernel.org/netdev/c584ef7e-6897-01f3-5b80-12b53f7b4bf4@kernel.org/
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250617141334.3724863-1-nico.escande@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose media OA units (Ashutosh)
Merge:
- Restore GuC submit UAF fix around queue destruction
accidentally removed in a drm-xe-fixes merge (Auld)
Core Changes:
- drm/gpusvm: Introduce devmem_only flag for allocation (Himal)
- drm/gpusvm: Add timeslicing support to GPU SVM (Brost)
Driver Changes:
- Make gem shrinker drm managed (Thomas)
- SRIOV VF Post-migration recovery of GGTT nodes and CTB (Tomasz)
- Some W/A additions and updates (Aradhya, Shekhar, Vinay, Daniele)
- Prefetch Support for svm ranges (Himal, Brost)
- Don't allocate managed BO for each policy change (Michal)
- Simplify and fix diff calculation in GuC submit (Lucas)
- Track FAST_REQ GuC H2Gs to report where errors came from (John)
- SRIOV PF: Don't allow LMEM provisioning if LMTT isn't available (Piotr)
- Check if all domains awake for MOCS dump (Tejas)
- Make creation of SLPC debugfs files conditional (Aradhya)
- Default auto_link_downgrade status to false (Aradhya)
- Use xe_mmio_read32() to read mtcfg register (Shuicheng)
- Updates in PCI ID tables (Atwood, Shekhar)
- SRIOV VF: Fail migration recovery if fixups needed but not supported (Tomasz)
- Add missing documentation around freq and RPa (Rodrigo)
- Some other SVM related fixes (Himal, Auld, Brost, Maarten)
- Allow to trigger GT resets using debugfs writes (Michal)
- Optimise CCS case for WB pages (Auld)
- Create LRC BO without VM (Niranjana)
- Initialize MOCS index early (Bala)
- HWMON fixes for BMG (Karthik, Lucas)
- Drop redundant conversion to bool (Raag)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Auld)
- Small fixes and cleanups for PXP (Daniele)
- Convert some print messages to GT-oriented ones (Michal)
- Resend potentially lost GuC H2G MMIO request (Michal)
- Add configfs to load with fewer engines (Lucas)
- Remove unmatched xe_vm_unlock from __xe_exec_queue_init (Maciej)
- SRIOV VF: Small updates around GGTT handling (Michal)
- Make VMA tile_present, tile_invalidated access rules clear (Brost)
- Xe3 Tuning: Disable NULL query for Anyhit Shader (Nitin)
- Fixes for VF GuC version (Daniele)
- Don't store the xe device pointer inside xe_ttm_tt (Dave)
- Small improvements in topology code (Michal)
- Stop relying on GGTT internals (Maarten)
- GSM size should be constant on most platforms (Roper)
- Reorder 'Get pages failed' message (Brost)
- WA BB related fixes and improvements (Lucas, Brost)
- Fix early wedge on GuC load failure (Daniele)
- Add helper function to inject fault into ct_dead_capture (Satyanarayana)
- Determine ATS / PTA programming during early sw init (Roper)
- Consolidate PAT programming logic for pre-Xe2 and post-Xe2 (Roper)
- Fix kconfig prompt (Lucas)
- Convert xe_pci tests to parametrized tests (Michal)
- Do not kill VM in PT code on -ENODATA (Brost)
- Move LRC_ENGINE_ID_PPHWSP_OFFSET outside of parallel offset (Brost)
- Enable media OA (Ashutosh)
- GuC log level tuning (Lucas)
- Add xe_vm_has_valid_gpu_mapping helper (Brost)
- Opportunistically skip TLB invalidaion on unbind (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aFMb_NVF_oCW7UVl@intel.com
|
|
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the usbnet driver. This transition ensures compatibility
with the latest design and enhances performance.
Signed-off-by: Jun Miao <jun.miao@intel.com>
Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now, all driver structures will be allocated by the core, i.e. no longer a
need of driver calling _iommufd_object_alloc. Thus, move it back.
Before:
text data bss dec hex filename
3024 180 0 3204 c84 drivers/iommu/iommufd/driver.o
9074 610 64 9748 2614 drivers/iommu/iommufd/main.o
After:
text data bss dec hex filename
2665 164 0 2829 b0d drivers/iommu/iommufd/driver.o
9410 618 64 10092 276c drivers/iommu/iommufd/main.o
Link: https://patch.msgid.link/r/79e630c7b911930cf36e3c8a775a04e66c528d65.1749882255.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
To ease the for-driver iommufd APIs, get_viommu_size and viommu_init ops
are introduced. Now, those existing vIOMMU supported drivers implemented
these two ops, replacing the viommu_alloc one. So, there is no use of it.
Remove it from the headers and the viommu core.
Link: https://patch.msgid.link/r/5b32d4499d7ed02a63e57a293c11b642d226ef8d.1749882255.git.nicolinc@nvidia.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
So far, a vIOMMU object has been allocated by IOMMU driver and initialized
with the driver-level structure, before it returns to the iommufd core for
core-level structure initialization. It has been requiring iommufd core to
expose some core structure/helpers in its driver.c file, which result in a
size increase of this driver module.
Meanwhile, IOMMU drivers are now requiring more vIOMMU-base structures for
some advanced feature, such as the existing vDEVICE and a future HW_QUEUE.
Initializing a core-structure later than driver-structure gives for-driver
helpers some trouble, when they are used by IOMMU driver assuming that the
new structure (including core) are fully initialized, for example:
core: viommu = ops->viommu_alloc();
driver: // my_viommu is successfully allocated
driver: my_viommu = iommufd_viommu_alloc(...);
driver: // This may crash if it reads viommu->ictx
driver: new = iommufd_new_viommu_helper(my_viommu->core ...);
core: viommu->ictx = ucmd->ictx;
core: ...
To ease such a condition, allow the IOMMU driver to report the size of its
vIOMMU structure, let the core allocate a vIOMMU object and initialize the
core-level structure first, and then hand it over the driver to initialize
its driver-level structure.
Thus, this requires two new iommu ops, get_viommu_size and viommu_init, so
iommufd core can communicate with drivers to replace the viommu_alloc op:
core: viommu = ops->get_viommu_size();
driver: return VIOMMU_STRUCT_SIZE();
core: viommu->ictx = ucmd->ictx; // and others
core: rc = ops->viommu_init();
driver: // This is safe now as viommu->ictx is inited
driver: new = iommufd_new_viommu_helper(my_viommu->core ...);
core: ...
This also adds a VIOMMU_STRUCT_SIZE macro, for drivers to use, which would
statically sanitize the driver structure.
Link: https://patch.msgid.link/r/3ab52c5b622dad476c43b1b1f1636c8b902f1692.1749882255.git.nicolinc@nvidia.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace unsigned int, to make it clear. No functional changes.
The viommu_alloc iommu op will be deprecated, so don't change that.
Link: https://patch.msgid.link/r/6c6ba5c0cd381594f17ae74355872d78d7a022c0.1749882255.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Run clang-format but exclude those not so obvious ones, which leaves us:
- Align indentations
- Add missing spaces
- Remove unnecessary spaces
- Remove unnecessary line wrappings
Link: https://patch.msgid.link/r/9132e1ab45690ab1959c66bbb51ac5536a635388.1749882255.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Renesas RZ/N2H DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/N2H (R9A09G087)
SoC, shared by driver and DT source files.
|
|
Renesas RZ/T2H PCLKL Clock DT Binding Definition
Peripheral Module Clock L (PCLKL) DT binding definition for the Renesas
RZ/T2H (R9A09G077) SoC, shared by driver and DT source files.
|
|
Document support for Module Standby and Software Reset found on the
Renesas RZ/N2H (R9A09G087) SoC. The Module Standby and Software Reset
IP is similar to that found on the RZ/T2H SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250609203656.333138-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the Peripheral Module Clock L (PCLKL) core clock ID for the RZ/T2H
(R9A09G077) SoC. This clock is used by peripherals such as IIC, WDT,
and others.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250617155757.149597-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
More fixes:
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
wifi: iwlwifi: cfg: Limit cb_size to valid range
wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
wifi: ath6kl: remove WARN on bad firmware input
wifi: carl9170: do not ping device which has failed to load firmware
wifi: ath12k: don't wait when there is no vdev started
wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: fix documentation on firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: ath12k: update link active in case two links fall on the same MAC
wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
wifi: ath12k: update freq range for each hardware mode
wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
wifi: mac80211: don't WARN for late channel/color switch
wifi: mac80211: drop invalid source address OCB frames
wifi: remove zero-length arrays
====================
Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This offset will be used in the time getters of auxiliary clocks. It is
added to the "monotonic" clock readout.
As auxiliary clocks do not utilize the offset fields of the core time
keeper, this is just an alias for offs_tai, so that the cache line layout
stays the same.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083026.533486349@linutronix.de
|
|
Now that we stash persistent information in struct pid there's no need
to play volatile games with pinning struct pid via dentries in pidfs.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-8-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Persist exit and coredump information independent of whether anyone
currently holds a pidfd for the struct pid.
The current scheme allocated pidfs dentries on-demand repeatedly.
This scheme is reaching it's limits as it makes it impossible to pin
information that needs to be available after the task has exited or
coredumped and that should not be lost simply because the pidfd got
closed temporarily. The next opener should still see the stashed
information.
This is also a prerequisite for supporting extended attributes on
pidfds to allow attaching meta information to them.
If someone opens a pidfd for a struct pid a pidfs dentry is allocated
and stashed in pid->stashed. Once the last pidfd for the struct pid is
closed the pidfs dentry is released and removed from pid->stashed.
So if 10 callers create a pidfs dentry for the same struct pid
sequentially, i.e., each closing the pidfd before the other creates a
new one then a new pidfs dentry is allocated every time.
Because multiple tasks acquiring and releasing a pidfd for the same
struct pid can race with each another a task may still find a valid
pidfs entry from the previous task in pid->stashed and reuse it. Or it
might find a dead dentry in there and fail to reuse it and so stashes a
new pidfs dentry. Multiple tasks may race to stash a new pidfs dentry
but only one will succeed, the other ones will put their dentry.
The current scheme aims to ensure that a pidfs dentry for a struct pid
can only be created if the task is still alive or if a pidfs dentry
already existed before the task was reaped and so exit information has
been was stashed in the pidfs inode.
That's great except that it's buggy. If a pidfs dentry is stashed in
pid->stashed after pidfs_exit() but before __unhash_process() is called
we will return a pidfd for a reaped task without exit information being
available.
The pidfds_pid_valid() check does not guard against this race as it
doens't sync at all with pidfs_exit(). The pid_has_task() check might be
successful simply because we're before __unhash_process() but after
pidfs_exit().
Introduce a new scheme where the lifetime of information associated with
a pidfs entry (coredump and exit information) isn't bound to the
lifetime of the pidfs inode but the struct pid itself.
The first time a pidfs dentry is allocated for a struct pid a struct
pidfs_attr will be allocated which will be used to store exit and
coredump information.
If all pidfs for the pidfs dentry are closed the dentry and inode can be
cleaned up but the struct pidfs_attr will stick until the struct pid
itself is freed. This will ensure minimal memory usage while persisting
relevant information.
The new scheme has various advantages. First, it allows to close the
race where we end up handing out a pidfd for a reaped task for which no
exit information is available. Second, it minimizes memory usage.
Third, it allows to remove complex lifetime tracking via dentries when
registering a struct pid with pidfs. There's no need to get or put a
reference. Instead, the lifetime of exit and coredump information
associated with a struct pid is bound to the lifetime of struct pid
itself.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-5-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move the pidfs entries to an anonymous struct.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-4-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In preparation for supporting independent auxiliary timekeepers, add a
clock valid field and set it to true for the system timekeeper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083026.287145536@linutronix.de
|
|
To support auxiliary timekeeping and the related user space interfaces,
it's required to define a clock ID range for them.
Reserve 8 auxiliary clock IDs after the regular timekeeping clock ID space.
This is the maximum number of auxiliary clocks the kernel can support. The actual
number of supported clocks depends obviously on the presence of related devices
and might be constraint by the available VDSO space.
Add the corresponding timekeeper IDs as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083025.905800695@linutronix.de
|
|
As long as there is only a single timekeeper, there is no need to clarify
which timekeeper is used. But with the upcoming reusage of the timekeeper
infrastructure for auxiliary clock timekeepers, an ID is required to
differentiate.
Introduce an enum for timekeeper IDs, introduce a field in struct tk_data
to store this timekeeper id and add also initialization. The id struct
field is added at the end of the second cachline, as there is a 4 byte hole
anyway.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083025.842476378@linutronix.de
|
|
The firmware will be able to only save and restore the context related to
library management.
This means that even without a full context save, the libraries do not
need to be re-loaded to the firmware after second or consecutive boots.
This is reported via the FW_READY notification, where BIT(15) indicates:
0 - the library restore is not done
1 - library restore is done
This bit is only valid if full context save is not enabled, full context
save is by definition saves and restores the library related book-keeping
as well.
Add a new flag to tell the platform code if the libraries have been
restored, no need to reload them after boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250619105623.4546-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
uart_get_console() has been unused since 2019's
commit bd0d9d159988 ("serial: remove ks8695 driver")
Remove it, and it's associated docs.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250608154654.73994-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device link to the USB4 host interface has to be removed
manually since it's no longer auto removed.
Fixes: 623dae3e7084 ("usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links")
Cc: stable <stable@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20250611111415.2707865-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The macro was introduced in commit 69cb1ec4ce4d ("mxc_udc: add
workaround for ENGcm09152 for i.MX35") on 2010-10-15, but its prefix was
misspelled as **FLS_** instead of the usual **FSL_**.
Its last in-tree user disappeared with commit a390bef7db1f ("usb:
gadget: fsl_mxc_udc: Remove the driver") on 2020-12-10, so the macro has
been completely unused since then.
Remove the dead and wrongly named definition.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://lore.kernel.org/r/20250618164743.1916838-1-rubenkelevra@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device controller will send CI_HDRC_CONTROLLER_PULLUP_EVENT event
when it's going to pullup or pulldown data line.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250614125645.207732-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_unlink_anchored_urbs() has been unused since it's last use was
removed in 2009 by
commit 9b9c5aaeedfd ("ar9170: xmit code revamp")
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250608235617.200731-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_remove_config() was added in 2012's
commit Fixes: 51cce6fc155c ("usb: gadget: composite: Add
usb_remove_config")
but has remained unused.
I see there was a use in drivers/staging/cch that
was removed by
commit 515e6dd20b3f ("Staging: ccg: delete it from the tree")
but it had it's own copy of usb_remove_config()
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608233338.179894-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_gadget_config_buf() has been unused since 2012's
commit fa06920a3ece ("usb: gadget: Remove File-backed Storage Gadget
(g_file_storage).")
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608233338.179894-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tegra_ehci_phy_restore_start() and tegra_ehci_phy_restore_end()
last use was removed in 2013 by
commit a4faa54e3aa2 ("USB: EHCI: tegra: remove all power management")
tegra_usb_phy_preresume() and tegra_usb_phy_postresume() last
use was removed in 2020 by
commit c3590c7656fb ("usb: host: ehci-tegra: Remove the driver")
(Although that one makes me wonder how much of the rest of the file
is actually used)
Remove both sets.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250603203905.279307-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comment for the flash_timeout setter mentioned it is the "flash
duration". Fix this by changing it to "flash timeout".
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20250617-ov9282-flash-strobe-v5-3-9762da74d065@linux.dev
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
Immutable tag for the pinctrl tree to pull from
Add the BGPIOF_NO_INPUT to the gpio-mmio API.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
