| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Push the new parameter down into every architecture that defines __WARN_FLAGS():
arm64
loongarch
parisc
powerpc
riscv
s390
sh
x86
Don't pass anything substantial down yet, just propagate the
new parameter with empty strings, without generating it or
using it.
( The string is never NULL, so it can be concatenated at the
preprocessor level. )
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20250515124644.2958810-2-mingo@kernel.org
|
|
Currently only left and right channels are supported for each amp.
Support is needed for a center channel, using both left and right
channel audio.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612160029.848104-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Dma-fence objects currently suffer from a potential use after free problem
where fences exported to userspace and other drivers can outlive the
exporting driver, or the associated data structures.
The discussion on how to address this concluded that adding reference
counting to all the involved objects is not desirable, since it would need
to be very wide reaching and could cause unloadable drivers if another
entity would be holding onto a signaled fence reference potentially
indefinitely.
This patch enables the safe access by introducing and documenting a
contract between fence exporters and users. It documents a set of
contraints and adds helpers which a) drivers with potential to suffer from
the use after free must use and b) users of the dma-fence API must use as
well.
Premise of the design has multiple sides:
1. Drivers (fence exporters) MUST ensure a RCU grace period between
signalling a fence and freeing the driver private data associated with it.
The grace period does not have to follow the signalling immediately but
HAS to happen before data is freed.
2. Users of the dma-fence API marked with such requirement MUST contain
the complete access to the data within a single code block guarded by
rcu_read_lock() and rcu_read_unlock().
The combination of the two ensures that whoever sees the
DMA_FENCE_FLAG_SIGNALED_BIT not set is guaranteed to have access to a
valid fence->lock and valid data potentially accessed by the fence->ops
virtual functions, until the call to rcu_read_unlock().
3. Module unload (fence->ops) disappearing is for now explicitly not
handled. That would required a more complex protection, possibly needing
SRCU instead of RCU to handle callers such as dma_fence_release() and
dma_fence_wait_timeout(), where race between
dma_fence_enable_sw_signaling, signalling, and dereference of
fence->ops->wait() would need a sleeping SRCU context.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250610164226.10817-4-tvrtko.ursulin@igalia.com
|
|
Simplify the scheduler making CONFIG_SMP=y sched_exec()
code unconditional.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-27-mingo@kernel.org
|
|
Simplify the scheduler by making the CONFIG_SMP=y primitives
of is_percpu_thread() and scheduler_ipi() unconditional.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-22-mingo@kernel.org
|
|
Simplify the scheduler by making CONFIG_SMP=y primitives and data
structures unconditional.
Introduce transitory wrappers for functionality not yet converted to SMP.
Note that this patch is pretty large, because there's no clear separation
between various aspects of the SMP scheduler, it's basically a huge block
of #ifdef CONFIG_SMP. A fair amount of it has to be switched on for it to
boot and work on UP systems.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-21-mingo@kernel.org
|
|
def_root_domain and sched_domains_mutex
Simplify the scheduler by making CONFIG_SMP=y primitives and data
structures unconditional.
Unconditionally build kernel/sched/topology.c and the main sched-domains
locking primitives.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-20-mingo@kernel.org
|
|
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The events xdp_cpumap_kthread, xdp_cpumap_enqueue and xdp_devmap_xmit are
only called when CONFIG_BPF_SYSCALL is defined. As each event can take up
to 5K regardless if they are used or not, it's best not to define them
when they are not used. Add #ifdef around these events when they are not
used.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250612182023.78397b76@batman.local.home
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Each TRACE_EVENT() defined can take up around 5K of text and meta data
regardless if they are used or not. New code is being developed that will
warn when a tracepoint is defined but not used.
The trace events xdp_redirect_map and xdp_redirect_map_err are defined but
not used, but there's also a comment that states these are kept around for
backward compatibility. Which is interesting because since they are not
used, any old BPF program that expects them to exist will get incorrect
data (no data) when they use them. It's worse than not working, it's
silently failing.
Remove them as they will soon cause warnings, or if they really need to
stick around, then code needs to be added to use them.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20250611155615.0c2cf61c@batman.local.home
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Simplify the arguments passed to phy_get_internal_delay() - the "dev"
argument is always &phydev->mdio.dev, and as the phydev is passed in,
there's no need to also pass in the struct device, especially when this
function is the only reason for the caller to have a local "dev"
variable.
Remove the redundant "dev" argument, and update the callers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPLwB-003VzR-4C@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_read_status() is exported, so we can move definition of
genphy_c45_driver to phy_device.c and make it static. This helps
to clean up phy.h a little.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ead3ab17-22d0-4cd3-901c-3d493ab851e6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make mdio_device_bus_match() the default match function for non-PHY
MDIO devices. Benefit is that we don't have to export this function
any longer. As long as mdiodev->modalias isn't set, there's no change
in behavior. mdiobus_create_device() is the only place where
mdiodev->modalias gets set, but this function sets
mdio_device_bus_match() as match function anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/6c94e3d3-bfb0-4ddc-a518-6fddbc64e1d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We mux multiple calls to the drivers via the .get_nfc and .set_nfc
callbacks. This is slightly inconvenient to the drivers as they
have to de-mux them back. It will also be awkward for netlink code
to construct struct ethtool_rxnfc when it wants to get info about
RX Flow Hash, from the RSS module.
Add dedicated driver callbacks. Create struct ethtool_rxfh_fields
which contains only data relevant to RXFH. Maintain the names of
the fields to avoid having to heavily modify the drivers.
For now support both callbacks, once all drivers are converted
ethtool_*et_rxfh_fields() will stop using the rxnfc callbacks.
Link: https://patch.msgid.link/20250611145949.2674086-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RX Flow Hashing supports using different configuration for different
RSS contexts. Only two drivers seem to support it. Make sure we
uniformly error out for drivers which don't.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Count states accumulated in bpf_scc_visit->backedges in
env->peak_states.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The previous patch switched read and precision tracking for
iterator-based loops from state-graph-based loop tracking to
control-flow-graph-based loop tracking.
This patch removes the now-unused `update_loop_entry()` and
`get_loop_entry()` functions, which were part of the state-graph-based
logic.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Current loop_entry-based exact states comparison logic does not handle
the following case:
.-> A --. Assume the states are visited in the order A, B, C.
| | | Assume that state B reaches a state equivalent to state A.
| v v At this point, state C is not processed yet, so state A
'-- B C has not received any read or precision marks from C.
As a result, these marks won't be propagated to B.
If B has incomplete marks, it is unsafe to use it in states_equal()
checks.
This commit replaces the existing logic with the following:
- Strongly connected components (SCCs) are computed over the program's
control flow graph (intraprocedurally).
- When a verifier state enters an SCC, that state is recorded as the
SCC entry point.
- When a verifier state is found equivalent to another (e.g., B to A
in the example), it is recorded as a states graph backedge.
Backedges are accumulated per SCC.
- When an SCC entry state reaches `branches == 0`, read and precision
marks are propagated through the backedges (e.g., from A to B, from
C to A, and then again from A to B).
To support nested subprogram calls, the entry state and backedge list
are associated not with the SCC itself but with an object called
`bpf_scc_callchain`. A callchain is a tuple `(callsite*, scc_id)`,
where `callsite` is the index of a call instruction for each frame
except the last.
See the comments added in `is_state_visited()` and
`compute_scc_callchain()` for more details.
Fixes: 2a0992829ea3 ("bpf: correct loop detection for iterators convergence")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compute strongly connected components in the program CFG.
Assign an SCC number to each instruction, recorded in
env->insn_aux[*].scc. Use Tarjan's algorithm for SCC computation
adapted to run non-recursively.
For debug purposes print out computed SCCs as a part of full program
dump in compute_live_registers() at log level 2, e.g.:
func#0 @0
Live regs before insn:
0: .......... (b4) w6 = 10
2 1: ......6... (18) r1 = 0xffff88810bbb5565
2 3: .1....6... (b4) w2 = 2
2 4: .12...6... (85) call bpf_trace_printk#6
2 5: ......6... (04) w6 += -1
2 6: ......6... (56) if w6 != 0x0 goto pc-6
7: .......... (b4) w6 = 5
1 8: ......6... (18) r1 = 0xffff88810bbb5567
1 10: .1....6... (b4) w2 = 2
1 11: .12...6... (85) call bpf_trace_printk#6
1 12: ......6... (04) w6 += -1
1 13: ......6... (56) if w6 != 0x0 goto pc-6
14: .......... (b4) w0 = 0
15: 0......... (95) exit
^^^
SCC number for the instruction
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This reverts commit 96a30e469ca1d2b8cc7811b40911f8614b558241.
Next patches in the series modify propagate_precision() to allow
arbitrary starting state. Precision propagation requires access to
jump history, and arbitrary states represent history not belonging to
`env->cur_state`.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bitmap fix from Yury Norov:
"Fix for __GENMASK() and __GENMASK_ULL() in UAPI"
* tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux:
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again
|
|
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.
v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
|
|
Add support for EDID based quirks which can be queried outside of the
EDID parser iteself by DRM core and drivers. There are at least two such
quirks applicable to all drivers: the DPCD register access probe quirk
and the 128b/132b DPRX Lane Count Conversion quirk (see 3.5.2.16.3 in
the v2.1a DP Standard). The latter quirk applies to panels with specific
EDID panel names, support for defining a quirk this way will be added as
a follow-up.
v2: Reset global_quirks in drm_reset_display_info().
v3: (Jani)
- Use one list for both the global and internal quirks.
- Drop change for panel name specific quirks.
- Add comment about the way quirks should be queried.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-4-imre.deak@intel.com
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
Add device tree clock binding definitions for CMU_HSI2
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250529112640.1646740-3-raghav.s@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix sparse errors
Bluetooth: ISO: Fix not using bc_sid as advertisement SID
Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================
Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function is no longer used after the four prior fixes.
Given all prior uses were wrong, it seems better to remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the include linux/debugfs.h into tas2781.h for code clean.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250612044252.1025-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the coredump socket to allow the coredump server to tell the
kernel how to process individual coredumps.
When the crashing task connects to the coredump socket the kernel will
send a struct coredump_req to the coredump server. The kernel will set
the size member of struct coredump_req allowing the coredump server how
much data can be read.
The coredump server uses MSG_PEEK to peek the size of struct
coredump_req. If the kernel uses a newer struct coredump_req the
coredump server just reads the size it knows and discard any remaining
bytes in the buffer. If the kernel uses an older struct coredump_req
the coredump server just reads the size the kernel knows.
The returned struct coredump_req will inform the coredump server what
features the kernel supports. The coredump_req->mask member is set to
the currently know features.
The coredump server may only use features whose bits were raised by the
kernel in coredump_req->mask.
In response to a coredump_req from the kernel the coredump server sends
a struct coredump_ack to the kernel. The kernel informs the coredump
server what version of struct coredump_ack it supports by setting struct
coredump_req->size_ack to the size it knows about. The coredump server
may only send as many bytes as coredump_req->size_ack indicates (a
smaller size is fine of course). The coredump server must set
coredump_ack->size accordingly.
The coredump server sets the features it wants to use in struct
coredump_ack->mask. Only bits returned in struct coredump_req->mask may
be used.
In case an invalid struct coredump_ack is sent to the kernel a non-zero
u32 integer is sent indicating the reason for the failure. If it was
successful a zero u32 integer is sent.
In the initial version the following features are supported in
coredump_{req,ack}->mask:
* COREDUMP_KERNEL
The kernel will write the coredump data to the socket.
* COREDUMP_USERSPACE
The kernel will not write coredump data but will indicate to the
parent that a coredump has been generated. This is used when userspace
generates its own coredumps.
* COREDUMP_REJECT
The kernel will skip generating a coredump for this task.
* COREDUMP_WAIT
The kernel will prevent the task from exiting until the coredump
server has shutdown the socket connection.
The flexible coredump socket can be enabled by using the "@@" prefix
instead of the single "@" prefix for the regular coredump socket:
@@/run/systemd/coredump.socket
will enable flexible coredump handling. Current kernels already enforce
that "@" must be followed by "/" and will reject anything else. So
extending this is backward and forward compatible.
Link: https://lore.kernel.org/20250603-work-coredump-socket-protocol-v2-1-05a5f0c18ecc@kernel.org
Acked-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Using "@argname@" in kernel-doc produces "argname****" (with "argname" in
bold) in the generated html output, so use the expected kernel-doc
notation of just "@argname" instead.
"Fixes:" lines are added in case Matthew's patch [1] is backported.
Link: https://lkml.kernel.org/r/20250605002337.2842659-1-rdunlap@infradead.org
Link: https://lore.kernel.org/linux-doc/3bc4e779-7a79-42c1-8867-024f643a22fc@infradead.org/T/#m5d2bd9d21fb34f297aa4e7db069f09bc27b89007 [1]
Fixes: 0db9299f48eb ("SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers")
Fixes: 8d1d4b538bb1 ("scatterlist: inline sg_next()")
Fixes: 18dabf473e15 ("Change table chaining layout")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Offload path is used for GRO with SW IPsec, and not just for HW
offload. So initialize it anyway.
Fixes: 585b64f5a620 ("xfrm: delay initialization of offload path till its actually requested")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/all/aEGW_5HfPqU1rFjl@krikkit
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The fbnic driver reports up-to 11 ranges resulting in the drop of the
last range. This patch increment the value of ETHTOOL_RMON_HIST_MAX to
address this limitation.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250610171109.1481229-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
... and fix the mount leak when anything's mounted there.
securityfs_recursive_remove becomes an alias for securityfs_remove -
we'll probably need to remove it in a cycle or two.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No users left and anything that wants it would be better off just
setting DCACHE_DONTCACHE in their ->s_d_flags.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the last user (d_alloc_pseudo()) and be done with that.
Any out-of-tree filesystem using it should switch to d_splice_alias_ops()
or, better yet, check whether it really needs to have ->d_op vary among
its dentries.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and store it in ->s_d_flags, to be used by __d_alloc()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
As per updated Bspec, Sync PCI IDs for BMG.
Bspec: 68090
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250605190804.1287289-2-dnyaneshwar.bhadane@intel.com
|
|
Make sure all values are covered.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250610140020.2227932-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Apart from the network and mount namespace all other namespaces expose a
stable inode number and userspace has been relying on that for a very
long time now. It's very much heavily used API. Align the mount
namespace and use a stable inode number from the reserved procfs inode
number space so this is consistent across all namespaces.
Link: https://lore.kernel.org/20250606-work-nsfs-v1-3-b8749c9a8844@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Apart from the network and mount namespace all other namespaces expose a
stable inode number and userspace has been relying on that for a very
long time now. It's very much heavily used API. Align the network
namespace and use a stable inode number from the reserved procfs inode
number space so this is consistent across all namespaces.
Link: https://lore.kernel.org/20250606-work-nsfs-v1-2-b8749c9a8844@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Userspace relies on the root inode numbers to identify the initial
namespaces. That's already a hard dependency. So we cannot change that
anymore. Move the initial inode numbers to a public header.
Link: https://github.com/systemd/systemd/commit/d293fade24b34ccc2f5716b0ff5513e9533cf0c4
Link: https://lore.kernel.org/20250606-work-nsfs-v1-1-b8749c9a8844@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The commit d6d1e3e6580c ("mm/execmem: Unify early execmem_cache
behaviour") changed early behaviour of execemem ROX cache to allow its
usage in early x86 code that allocates text pages when
CONFIG_MITGATION_ITS is enabled.
The permission management of the pages allocated from execmem for ITS
mitigation is now completely contained in arch/x86/kernel/alternatives.c
and therefore there is no need to special case early allocations in
execmem.
This reverts commit d6d1e3e6580ca35071ad474381f053cbf1fb6414.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-6-rppt@kernel.org
|
|
The of pages with ITS thunks allocated for modules are tracked by an
array in 'struct module'.
Since this is very architecture specific data structure, move it to
'struct mod_arch_specific'.
No functional changes.
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-4-rppt@kernel.org
|
|
Backmerging to forward to v6.16-rc1
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SC8180X platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20250512-sc8180x-camcc-support-v4-2-8fb1d3265f52@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The multi-media AHB clocks are needed to create HW dependency in
the multimedia CC dt blocks and avoid any issues. They were not
defined in the initial bindings. Add all the missing clock bindings
for gcc-sc8180x.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250512-sc8180x-camcc-support-v4-1-8fb1d3265f52@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some drivers cannot have a fallback, e.g., because the key is held
in hardware. Allow these to be used with ahash by adding the bit
CRYPTO_ALG_NO_FALLBACK.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
|
