aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/git.orderFile (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2024-08-20drm/amdgpu/gfx9: Add cleaner shader support for GFX9.4.4 hardwareSrinivasan Shanmugam1-0/+1
This commit extends the cleaner shader feature to support GFX9.4.4 hardware. The cleaner shader feature is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). This operation needs to be performed in isolation, while no other tasks should be running on the GPU at the same time. Previously, the cleaner shader feature was implemented for GFX9.4.3 hardware. This commit adds support for GFX9.4.4 hardware by allowing the cleaner shader to be used with this hardware version. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx9: Add cleaner shader for GFX9.4.3Srinivasan Shanmugam2-0/+191
This commit adds the cleaner shader microcode for GFX9.4.3 GPUs. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. Without the cleaner shader, residual data from a previous workload could potentially be accessed by a subsequent workload, leading to data leaks and incorrect computation results. The cleaner shader microcode is represented as an array of 32-bit words (`gfx_9_4_3_cleaner_shader_hex`). This array is the binary representation of the cleaner shader code, which is written in a low-level GPU instruction set. When the cleaner shader feature is enabled, the AMDGPU driver loads this array into a specific location in the GPU memory. The GPU then reads this memory location to fetch and execute the cleaner shader instructions. The cleaner shader is executed automatically by the GPU at the end of each workload, before the next workload starts. This ensures that all GPU resources are in a clean state before the start of each workload. This addition is part of the cleaner shader feature implementation. The cleaner shader feature helps improve GPU performance and resource utilization by cleaning up GPU resources after they are used. It also enhances security and reliability by preventing data leaks between workloads. v2: fix copyright date (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx9: Implement cleaner shader support for GFX9.4.3 hardwareSrinivasan Shanmugam2-5/+78
The patch modifies the gfx_v9_4_3_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v9_4_3_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v9_4_3 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v9_4_3_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx9: Implement cleaner shader support for GFX9 hardwareSrinivasan Shanmugam2-5/+66
The patch modifies the gfx_v9_0_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v9_0_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v9_0 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v9_0_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Add PACKET3_RUN_CLEANER_SHADER for cleaner shader executionSrinivasan Shanmugam1-0/+4
This commit adds the PACKET3_RUN_CLEANER_SHADER definition. This packet is a command packet used to instruct the GPU to execute the cleaner shader. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. The PACKET3_RUN_CLEANER_SHADER packet is used to trigger the execution of the cleaner shader on the GPU. The packet consists of a header followed by a RESERVED field, which is programmed to zero. When the GPU receives this packet, it fetches and executes the cleaner shader instructions from the location specified in the packet. The cleaner shader feature helps to enhances security and reliability by preventing data leaks between workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Add sysfs interface for running cleaner shaderSrinivasan Shanmugam1-0/+134
This patch adds a new sysfs interface for running the cleaner shader on AMD GPUs. The cleaner shader is used to clear GPU memory before it's reused, which can help prevent data leakage between different processes. The new sysfs file is write-only and is named `run_cleaner_shader`. Write the number of the partition to this file to trigger the cleaner shader on that partition. There is only one partition on GPUs which do not support partitioning. Changes made in this patch: - Added `amdgpu_set_run_cleaner_shader` function to handle writes to the `run_cleaner_shader` sysfs file. - Added `run_cleaner_shader` to the list of device attributes in `amdgpu_device_attrs`. - Updated `default_attr_update` to handle `run_cleaner_shader`. - Added `AMDGPU_DEVICE_ATTR_WO` macro to create write-only device attributes. v2: fix error handling (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
2024-08-20drm/amdgpu: Add enforce_isolation sysfs attributeSrinivasan Shanmugam4-0/+107
This commit adds a new sysfs attribute 'enforce_isolation' to control the 'enforce_isolation' setting per GPU. The attribute can be read and written, and accepts values 0 (disabled) and 1 (enabled). When 'enforce_isolation' is enabled, reserved VMIDs are allocated for each ring. When it's disabled, the reserved VMIDs are freed. The set function locks a mutex before changing the 'enforce_isolation' flag and the VMIDs, and unlocks it afterwards. This ensures that these operations are atomic and prevents race conditions and other concurrency issues. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Enforce isolation as part of the jobSrinivasan Shanmugam3-1/+6
This patch adds a new parameter 'enforce_isolation' to the amdgpu_job structure. This parameter is used to determine whether shader isolation should be enforced for a job. The enforce_isolation parameter is then stored in the amdgpu_job structure and used when flushing the VM. The enforce_isolation field of the amdgpu_job structure is set directly after the job is allocated This change allows more fine-grained control over shader isolation, making it possible to enforce isolation on a per-job basis rather than globally. This can be useful in scenarios where only certain jobs require isolation. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com>
2024-08-16drm/amdgpu: abort KIQ waits when there is a pending resetVictor Skvortsov2-1/+8
Stop waiting for the KIQ to return back when there is a reset pending. It's quite likely that the KIQ will never response. Signed-off-by: Koenig Christian <Christian.Koenig@amd.com> Suggested-by: Lazar Lijo <Lijo.Lazar@amd.com> Tested-by: Victor Skvortsov <victor.skvortsov@amd.com> Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: Make enforce_isolation setting per GPUSrinivasan Shanmugam5-8/+21
This commit makes enforce_isolation setting to be per GPU and per partition by adding the enforce_isolation array to the adev structure. The adev variable is set based on the global enforce_isolation module parameter during device initialization. In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU is used to determine whether to enforce isolation between graphics and compute processes on that GPU. In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU and partition is used to determine whether to enforce isolation between graphics and compute processes on that GPU and partition. This allows the enforce_isolation setting to be controlled individually for each GPU and each partition, which is useful in a system with multiple GPUs and partitions where different isolation settings might be desired for different GPUs and partitions. v2: fix loop in amdgpu_vmid_mgr_init() (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Christian König <christian.koenig@amd.com>
2024-08-16drm/amdgpu: Emit cleaner shader at end of IB submissionAlex Deucher2-0/+6
This commit introduces the emission of a cleaner shader at the end of the IB submission process. This is achieved by adding a new function pointer, `emit_cleaner_shader`, to the `amdgpu_ring_funcs` structure. If the `emit_cleaner_shader` function is set in the ring functions, it is called during the VM flush process. The cleaner shader is only emitted if the `enable_cleaner_shader` flag is set in the `amdgpu_device` structure. This allows the cleaner shader emission to be controlled on a per-device basis. By emitting a cleaner shader at the end of the IB submission, we can ensure that the VM state is properly cleaned up after each submission. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com>
2024-08-16drm/amdgpu: Add infrastructure for Cleaner Shader featureSrinivasan Shanmugam2-0/+49
The cleaner shader is used by the CP firmware to clean LDS and GPRs between processes on the CUs. This adds an internal API for GFX IP code to allocate and initialize the cleaner shader. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com>
2024-08-16drm/amdgpu: handle enforce isolation on non-0 gfxhubAlex Deucher1-1/+1
Some chips have more than one gfxhub so check if we are a gfxhub rather than just gfxhub 0. Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1Alex Deucher1-8/+10
The workaround seems to cause stability issues on other SDMA 5.2.x IPs. Fixes: a03ebf116303 ("drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3556 Acked-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn ip dump support for vcn_v2_6Sunil Khatri1-2/+2
Add support for logging the registers in devcoredump buffer for vcn_v2_6. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v2_5 ip dumpSunil Khatri1-1/+33
Add support for logging the registers in devcoredump buffer for vcn_v2_5. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v2_5 ip dump supportSunil Khatri1-1/+79
Add support of vcn ip dump in the devcoredump for vcn_v2_5. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v2_0 ip dumpSunil Khatri1-1/+33
Add support for logging the registers in devcoredump buffer for vcn_v2_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v2_0 ip dump supportSunil Khatri1-1/+78
Add support of vcn ip dump in the devcoredump for vcn_v2_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v1_0 ip dumpSunil Khatri1-1/+33
Add support for logging the registers in devcoredump buffer for vcn_v1_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v1_0 ip dump supportSunil Khatri1-1/+77
Add support of vcn ip dump in the devcoredump for vcn_v1_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v4_0_5 ip dumpSunil Khatri1-1/+33
Add support for logging the registers in devcoredump buffer for vcn_v4_0_5. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v4_0 ip dumpSunil Khatri1-1/+33
Add support for logging the registers in devcoredump buffer for vcn_v4_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v4_0_3 ip dumpSunil Khatri1-1/+33
Add support for logging the registers in devcoredump buffer for vcn_v4_0_3. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v4_0_5 ip dump supportSunil Khatri1-1/+78
Add support of vcn ip dump in the devcoredump for vcn_v4_0_5. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v4_0 ip dump supportSunil Khatri1-1/+79
Add support of vcn ip dump in the devcoredump for vcn_v4_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v4_0_3 ip dump supportSunil Khatri1-1/+80
Add support of vcn ip dump in the devcoredump for vcn_v4_0_3. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v5_0 ip dumpSunil Khatri1-1/+33
Add support for logging the registers in devcoredump buffer for vcn_v5_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/mes12: add API for user queue resetAlex Deucher1-0/+27
Add API for resetting user queues. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/mes11: add API for user queue resetAlex Deucher1-0/+21
Add API for resetting user queues. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/mes: add API for user queue resetAlex Deucher2-0/+52
Add API for resetting user queues. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx11: export gfx_v11_0_request_gfx_index_mutex()Alex Deucher2-2/+5
It will be used by the queue reset code. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx11: add a mutex for the gfx semaphoreAlex Deucher3-3/+10
This will be used in more places in the future so add a mutex. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx11: enter safe mode before touching CP_INT_CNTLAlex Deucher1-2/+2
Need to enter safe mode before touching GC MMIO. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx7: add ring reset callback for gfxAlex Deucher2-1/+76
Add ring reset callback for gfx. v2: fix operator precedence (kernel test robot) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx8: add ring reset callback for gfxAlex Deucher2-1/+75
Add ring reset callback for gfx. v2: fix operator precedence (kernel test robot) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v5_0 ip dump supportSunil Khatri1-1/+75
Add support of vcn ip dump in the devcoredump for vcn_v5_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add print support for vcn_v3_0 ip dumpSunil Khatri1-1/+34
Add support for logging the registers in devcoredump buffer for vcn_v3_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn_v3_0 ip dump supportSunil Khatri1-1/+77
Add support of vcn ip dump in the devcoredump for vcn_v3_0. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: add vcn ip dump ptr in vcn global structSunil Khatri1-0/+3
Add pointer to the vcn ip dump in the vcn global structure to be accessible for all vcn version via global adev. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amd: Remove unused declarationsZhang Zekun2-9/+0
amdgpu_gart_table_vram_pin() and amdgpu_gart_table_vram_unpin() has been removed since commit 575e55ee4fbc ("drm/amdgpu: recover gart table at resume") remain the declarations untouched in the header files. Besides, amdgpu_dm_display_resume() has also beed removed since commit a80aa93de1a0 ("drm/amd/display: Unify dm resume sequence into a single call"). So, let's remove this unused declarations. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/radeon/evergreen_cs: fix int overflow errors in cs track offsetsNikita Zhandarovich1-31/+31
Several cs track offsets (such as 'track->db_s_read_offset') either are initialized with or plainly take big enough values that, once shifted 8 bits left, may be hit with integer overflow if the resulting values end up going over u32 limit. Same goes for a few instances of 'surf.layer_size * mslice' multiplications that are added to 'offset' variable - they may potentially overflow as well and need to be validated properly. While some debug prints in this code section take possible overflow issues into account, simply casting to (unsigned long) may be erroneous in its own way, as depending on CPU architecture one is liable to get different results. Fix said problems by: - casting 'offset' to fixed u64 data type instead of ambiguous unsigned long. - casting one of the operands in vulnerable to integer overflow cases to u64. - adjust format specifiers in debug prints to properly represent 'offset' values. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: fixing rlc firmware loading failure issueYang Wang1-2/+3
Skip rlc firmware validation to ignore firmware header size mismatch issues. This restores the workaround added in commit 849e133c973c ("drm/amdgpu: Fix the null pointer when load rlc firmware") Fixes: 3af2c80ae2f5 ("drm/amdgpu: refine gfx10 firmware loading") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3551 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu: remove ME0 registers from mi300 dumpSunil Khatri1-37/+0
Remove ME0 registers from MI300 gfx_9_4_3 ipdump MI300 does not have gfx ME and hence those register are just empty one and could be dropped. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx9: use rlc safe mode for soft recoveryAlex Deucher1-0/+2
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx9.4.3: use rlc safe mode for soft recoveryAlex Deucher1-0/+2
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx9.4.3: use proper rlc safe mode helpersAlex Deucher1-4/+4
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx9: use proper rlc safe mode helpersAlex Deucher1-4/+4
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx9: add ring reset callback for gfxAlex Deucher1-0/+46
Add ring reset callback for gfx. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-16drm/amdgpu/gfx9: per queue reset only on bare metalAlex Deucher2-0/+6
It's not supported under SR-IOV at the moment. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-04 04:00:32 +0000