aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/stackcollapse.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-01-06HID: intel-ish-hid: ishtp-fw-loader: Fix a kernel-doc formatting issueYang Li1-1/+2
This function had kernel-doc that not used a hash to separate the function name from the one line description. The warning was found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/hid/intel-ish-hid/ishtp-fw-loader.c:271: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: intel-ish-hid: ipc: Specify no cache snooping on TGL and ADLYe Xiang1-1/+5
Specify that both TGL and ADL don't support DMA cache snooping. Signed-off-by: Ye Xiang <xiang.ye@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: hid-uclogic-params: Invalid parameter check in ↵José Expósito1-1/+3
uclogic_params_frame_init_v1_buttonpad The function performs a check on the hdev input parameters, however, it is used before the check. Initialize the udev variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module") Addresses-Coverity-ID: 1443763 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_initJosé Expósito1-3/+7
The function performs a check on its input parameters, however, the hdev parameter is used before the check. Initialize the stack variables after checking the input parameters to avoid a possible NULL pointer dereference. Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module") Addresses-Coverity-ID: 1443804 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_descJosé Expósito1-1/+3
The function performs a check on the hdev input parameters, however, it is used before the check. Initialize the udev variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module") Addresses-Coverity-ID: 1443827 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: hid-uclogic-params: Invalid parameter check in uclogic_params_initJosé Expósito1-4/+9
The function performs a check on its input parameters, however, the hdev parameter is used before the check. Initialize the stack variables after checking the input parameters to avoid a possible NULL pointer dereference. Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module") Addresses-Coverity-ID: 1443831 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: Add new Letsketch tablet driverHans de Goede5-0/+347
Add a new driver for the LetSketch / VSON WP9620N drawing tablet. This drawing tablet is also sold under other brand names such as Case U, presumably this driver will work for all of them. But it has only been tested with a LetSketch WP9620N model. These tablets also work without a special HID driver, but then only part of the active area works and both the pad and stylus buttons are hardwired to special key-combos. E.g. the 2 stylus buttons send right mouse clicks / resp. "e" key presses. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2005575 BugLink: https://github.com/DIGImend/digimend-kernel-drivers/issues/528 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: apple: Add Magic Keyboard 2021 with fingerprint reader FN key mappingJosé Expósito1-1/+3
Use the function key table introduced for the Magic Keyboard 2021 without fingerprint reader in the models with fingerprint reader and/or numpad. Tested with the ANSI variant of the keyboard with and without numpad. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: apple: Add 2021 magic keyboard FN key mappingBenjamin Berg1-1/+28
The new 2021 apple models have a different FN key assignment. Add a new translation table and use that for the 2021 magic keyboard. Signed-off-by: Benjamin Berg <bberg@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: magicmouse: set Magic Trackpad 2021 nameJosé Expósito1-3/+9
The Apple Magic Trackpad 2021 (3rd generation) has the same product ID as the 2nd generation. However, when connected through Bluetooth, the version has changed from 0x107 to 0x110. The other meaningful change is that the name has dropped the generation number and now it is just "Apple Inc. Magic Trackpad", like the first generation model. Set the device name correctly to ensure the same driver settings are loaded, whether connected via Bluetooth or USB. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: magicmouse: set device name when it has been personalizedJosé Expósito1-3/+11
If the Apple Magic Trackpad 2 has been connected to a Mac, the name is automatically personalized showing its owner name. For example: "José Expósito's Trackpad". When connected through Bluetooth, the personalized name is reported, however, when connected through USB the generic name is reported. Set the device name correctly to ensure the same driver settings are loaded, whether connected via Bluetooth or USB. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: apple: Add 2021 Magic Keyboard with number padAlex Henrie2-0/+5
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-01-06HID: apple: Add 2021 Magic Keyboard with fingerprint readerAlex Henrie3-0/+6
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Tested-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-12-20HID: potential dereference of null pointerJiasheng Jiang1-0/+3
The return value of devm_kzalloc() needs to be checked. To avoid hdev->dev->driver_data to be null in case of the failure of alloc. Fixes: 14c9c014babe ("HID: add vivaldi HID driver") Cc: stable@vger.kernel.org Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211215083605.117638-1-jiasheng@iscas.ac.cn
2021-12-20HID: holtek: fix mouse probingBenjamin Tissoires1-0/+15
An overlook from the previous commit: we don't even parse or start the device, meaning that the device is not presented to user space. Fixes: 93020953d0fa ("HID: check for valid USB device for many HID drivers") Cc: stable@vger.kernel.org Link: https://bugs.archlinux.org/task/73048 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341 Link: https://lore.kernel.org/r/e4efbf13-bd8d-0370-629b-6c80c0044b15@leemhuis.info/ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2021-12-19Linux 5.16-rc6v5.16-rc6Linus Torvalds1-1/+1
2021-12-19KVM: x86: Retry page fault if MMU reload is pending and root has no spSean Christopherson1-1/+15
Play nice with a NULL shadow page when checking for an obsolete root in the page fault handler by flagging the page fault as stale if there's no shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending. Invalidating memslots, which is the only case where _all_ roots need to be reloaded, requests all vCPUs to reload their MMUs while holding mmu_lock for lock. The "special" roots, e.g. pae_root when KVM uses PAE paging, are not backed by a shadow page. Running with TDP disabled or with nested NPT explodes spectaculary due to dereferencing a NULL shadow page pointer. Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the root. Zapping shadow pages in response to guest activity, e.g. when the guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current vCPU isn't using the affected root. I.e. KVM_REQ_MMU_RELOAD can be seen with a completely valid root shadow page. This is a bit of a moot point as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will be cleaned up in the future. Fixes: a955cad84cda ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211209060552.2956723-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDsVitaly Kuznetsov1-17/+0
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend on guest visible CPUIDs and (incorrect) KVM logic implementing it is about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden and causes test to fail. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211216165213.338923-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19KVM: x86: Drop guest CPUID check for host initiated writes to ↵Vitaly Kuznetsov1-1/+1
MSR_IA32_PERF_CAPABILITIES The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should not depend on guest visible CPUID entries, even if just to allow creating/restoring guest MSRs and CPUIDs in any sequence. Fixes: 27461da31089 ("KVM: x86/pmu: Support full width counting") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211216165213.338923-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-19Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"Jens Axboe1-2/+0
This reverts commit cb2ac2912a9ca7d3d26291c511939a41361d2d83. Alex and the kernel test robot report that this causes a significant performance regression with BFQ. I can reproduce that result, so let's revert this one as we're close to -rc6 and we there's no point in trying to rush a fix. Link: https://lore.kernel.org/linux-block/1639853092.524jxfaem2.none@localhost/ Link: https://lore.kernel.org/lkml/20211219141852.GH14057@xsang-OptiPlex-9020/ Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-18perf inject: Fix segfault due to perf_data__fd() without openAdrian Hunter1-3/+7
The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18perf inject: Fix segfault due to close without openAdrian Hunter1-1/+2
The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18perf expr: Fix missing check for return value of hashmap__new()Miaoqian Lin1-0/+5
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc() fails, add IS_ERR() checking for ctx->ids. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com [ s/kfree()/free()/ and add missing linux/err.h include ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner()Zqiang1-1/+1
Optimistic spinning needs to be terminated when the spinning waiter is not longer the top waiter on the lock, but the condition is negated. It terminates if the waiter is the top waiter, which is defeating the whole purpose. Fixes: c3123c431447 ("locking/rtmutex: Dont dereference waiter lockless") Signed-off-by: Zqiang <qiang1.zhang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211217074207.77425-1-qiang1.zhang@intel.com
2021-12-17cifs: sanitize multiple delimiters in prepathThiago Rafael Becker1-1/+37
mount.cifs can pass a device with multiple delimiters in it. This will cause rename(2) to fail with ENOENT. V2: - Make sanitize_path more readable. - Fix multiple delimiters between UNC and prepath. - Avoid a memory leak if a bad user starts putting a lot of delimiters in the path on purpose. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2031200 Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Cc: stable@vger.kernel.org # 5.11+ Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-17cifs: ignore resource_id while getting fscache super cookieShyam Prasad N2-13/+7
We have a cyclic dependency between fscache super cookie and root inode cookie. The super cookie relies on tcon->resource_id, which gets populated from the root inode number. However, fetching the root inode initializes inode cookie as a child of super cookie, which is yet to be populated. resource_id is only used as auxdata to check the validity of super cookie. We can completely avoid setting resource_id to remove the circular dependency. Since vol creation time and vol serial numbers are used for auxdata, we should be fine. Additionally, there will be auxiliary data check for each inode cookie as well. Fixes: 5bf91ef03d98 ("cifs: wait for tcon resource_id before getting fscache super") CC: David Howells <dhowells@redhat.com> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-17timekeeping: Really make sure wall_to_monotonic isn't positiveYu Liao1-2/+1
Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive") it is still possible to make wall_to_monotonic positive by running the following code: int main(void) { struct timespec time; clock_gettime(CLOCK_MONOTONIC, &time); time.tv_nsec = 0; clock_settime(CLOCK_REALTIME, &time); return 0; } The reason is that the second parameter of timespec64_compare(), ts_delta, may be unnormalized because the delta is calculated with an open coded substraction which causes the comparison of tv_sec to yield the wrong result: wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 } ts_delta = { .tv_sec = -9, .tv_nsec = -900000000 } That makes timespec64_compare() claim that wall_to_monotonic < ts_delta, but actually the result should be wall_to_monotonic > ts_delta. After normalization, the result of timespec64_compare() is correct because the tv_sec comparison is not longer misleading: wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 } ts_delta = { .tv_sec = -10, .tv_nsec = 100000000 } Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the issue. Fixes: e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive") Signed-off-by: Yu Liao <liaoyu15@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211213135727.1656662-1-liaoyu15@huawei.com
2021-12-17Revert "usb: early: convert to readl_poll_timeout_atomic()"Greg Kroah-Hartman1-4/+11
This reverts commit 796eed4b2342c9d6b26c958e92af91253a2390e1. This change causes boot lockups when using "arlyprintk=xdbc" because ktime can not be used at this point in time in the boot process. Also, it is not needed for very small delays like this. Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Fixes: 796eed4b2342 ("usb: early: convert to readl_poll_timeout_atomic()") Link: https://lore.kernel.org/r/c2b5c9bb-1b75-bf56-3754-b5b18812d65e@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17MAITAINERS: Change zonefs maintainer email addressDamien Le Moal1-1/+1
Update my email address from damien.lemoal@wdc.com to damien.lemoal@opensource.wdc.com. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-12-17zonefs: add MODULE_ALIAS_FSNaohiro Aota1-0/+1
Add MODULE_ALIAS_FS() to load the module automatically when you do "mount -t zonefs". Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Cc: stable <stable@vger.kernel.org> # 5.6+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-12-16riscv: dts: sifive unmatched: Link the tmp451 with its power supplyVincent Pelletier1-0/+1
Fixes the following probe warning: lm90 0-004c: Looking up vcc-supply from device tree lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed lm90 0-004c: supply vcc not found, using dummy regulator Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Fix regulator for board rev3Vincent Pelletier1-60/+24
The existing values are rejected by the da9063 regulator driver, as they are unachievable with the declared chip setup (non-merged vcore and bmem are unable to provide the declared curent). Fix voltages to match rev3 schematics, which also matches their boot-up configuration within the chip's available precision. Declare bcore1/bcore2 and bmem/bio as merged. Set ldo09 and ldo10 as always-on as their consumers are not declared but exist. Drop ldo current limits as there is no current limit feature for these regulators in the DA9063. Fixes warnings like: DA9063_LDO3: Operation of current configuration missing Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Expose the PMIC sub-functionsVincent Pelletier1-0/+12
These sub-functions are available in the chip revision on this board, so expose them. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Expose the board ID eepromVincent Pelletier1-0/+10
Mark it as read-only as it is factory-programmed with identifying information, and no executable nor configuration: - eth MAC address - board model (PCB version, BoM version) - board serial number Accidental modification would cause misidentification which could brick the board, so marking read-only seem like both a safe and non-constraining choice. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-16riscv: dts: sifive unmatched: Name gpio linesVincent Pelletier1-0/+4
Follow the pin descriptions given in the version 3 of the board schematics. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-12-17libata: if T_LENGTH is zero, dma direction should be DMA_NONEGeorge Kennedy1-2/+13
Avoid data corruption by rejecting pass-through commands where T_LENGTH is zero (No data is transferred) and the dma direction is not DMA_NONE. Cc: <stable@vger.kernel.org> Reported-by: syzkaller<syzkaller@googlegroups.com> Signed-off-by: George Kennedy<george.kennedy@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-12-16selinux: fix sleeping function called from invalid contextScott Mayhew1-14/+19
selinux_sb_mnt_opts_compat() is called via sget_fc() under the sb_lock spinlock, so it can't use GFP_KERNEL allocations: [ 868.565200] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:230 [ 868.568246] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 4914, name: mount.nfs [ 868.569626] preempt_count: 1, expected: 0 [ 868.570215] RCU nest depth: 0, expected: 0 [ 868.570809] Preemption disabled at: [ 868.570810] [<0000000000000000>] 0x0 [ 868.571848] CPU: 1 PID: 4914 Comm: mount.nfs Kdump: loaded Tainted: G W 5.16.0-rc5.2585cf9dfa #1 [ 868.573273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 [ 868.574478] Call Trace: [ 868.574844] <TASK> [ 868.575156] dump_stack_lvl+0x34/0x44 [ 868.575692] __might_resched.cold+0xd6/0x10f [ 868.576308] slab_pre_alloc_hook.constprop.0+0x89/0xf0 [ 868.577046] __kmalloc_track_caller+0x72/0x420 [ 868.577684] ? security_context_to_sid_core+0x48/0x2b0 [ 868.578569] kmemdup_nul+0x22/0x50 [ 868.579108] security_context_to_sid_core+0x48/0x2b0 [ 868.579854] ? _nfs4_proc_pathconf+0xff/0x110 [nfsv4] [ 868.580742] ? nfs_reconfigure+0x80/0x80 [nfs] [ 868.581355] security_context_str_to_sid+0x36/0x40 [ 868.581960] selinux_sb_mnt_opts_compat+0xb5/0x1e0 [ 868.582550] ? nfs_reconfigure+0x80/0x80 [nfs] [ 868.583098] security_sb_mnt_opts_compat+0x2a/0x40 [ 868.583676] nfs_compare_super+0x113/0x220 [nfs] [ 868.584249] ? nfs_try_mount_request+0x210/0x210 [nfs] [ 868.584879] sget_fc+0xb5/0x2f0 [ 868.585267] nfs_get_tree_common+0x91/0x4a0 [nfs] [ 868.585834] vfs_get_tree+0x25/0xb0 [ 868.586241] fc_mount+0xe/0x30 [ 868.586605] do_nfs4_mount+0x130/0x380 [nfsv4] [ 868.587160] nfs4_try_get_tree+0x47/0xb0 [nfsv4] [ 868.587724] vfs_get_tree+0x25/0xb0 [ 868.588193] do_new_mount+0x176/0x310 [ 868.588782] __x64_sys_mount+0x103/0x140 [ 868.589388] do_syscall_64+0x3b/0x90 [ 868.589935] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 868.590699] RIP: 0033:0x7f2b371c6c4e [ 868.591239] Code: 48 8b 0d dd 71 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d aa 71 0e 00 f7 d8 64 89 01 48 [ 868.593810] RSP: 002b:00007ffc83775d88 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [ 868.594691] RAX: ffffffffffffffda RBX: 00007ffc83775f10 RCX: 00007f2b371c6c4e [ 868.595504] RDX: 0000555d517247a0 RSI: 0000555d51724700 RDI: 0000555d51724540 [ 868.596317] RBP: 00007ffc83775f10 R08: 0000555d51726890 R09: 0000555d51726890 [ 868.597162] R10: 0000000000000000 R11: 0000000000000246 R12: 0000555d51726890 [ 868.598005] R13: 0000000000000003 R14: 0000555d517246e0 R15: 0000555d511ac925 [ 868.598826] </TASK> Cc: stable@vger.kernel.org Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount") Signed-off-by: Scott Mayhew <smayhew@redhat.com> [PM: cleanup/line-wrap the backtrace] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-12-16bpf, selftests: Fix racing issue in btf_skc_cls_ingress testMartin KaFai Lau1-2/+14
The libbpf CI reported occasional failure in btf_skc_cls_ingress: test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0 bpf prog error at line 97 "error at line 97" means the bpf prog cannot find the listening socket when the final ack is received. It then skipped processing the syncookie in the final ack which then led to "recv_cookie:0". The problem is the userspace program did not do accept() and went ahead to close(listen_fd) before the kernel (and the bpf prog) had a chance to process the final ack. The fix is to add accept() call so that the userspace will wait for the kernel to finish processing the final ack first before close()-ing everything. Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
2021-12-16selftest/bpf: Add a test that reads various addresses.Alexei Starovoitov2-0/+32
Add a function to bpf_testmod that returns invalid kernel and user addresses. Then attach an fexit program to that function that tries to read memory through these addresses. This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-16bpf: Fix extable address check.Alexei Starovoitov1-7/+42
The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL, but it cannot distinguish IS_ERR pointer from valid one. When offset is added to IS_ERR pointer it may become small positive value which is a user address that is not handled by extable logic and has to be checked for at the runtime. Tighten BPF_PROBE_MEM pointer check code to prevent this case. Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-16bpf: Fix extable fixup offset.Alexei Starovoitov1-1/+1
The prog - start_of_ldx is the offset before the faulting ldx to the location after it, so this will be used to adjust pt_regs->ip for jumping over it and continuing, and with old temp it would have been fixed up to the wrong offset, causing crash. Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-12-16bpf, selftests: Add test case trying to taint map value pointerDaniel Borkmann1-0/+23
Add a test case which tries to taint map value pointer arithmetic into a unknown scalar with subsequent export through the map. Before fix: # ./test_verifier 1186 #1186/u map access: trying to leak tained dst reg FAIL Unexpected success to load! verification time 24 usec stack depth 8 processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 #1186/p map access: trying to leak tained dst reg FAIL Unexpected success to load! verification time 8 usec stack depth 8 processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 Summary: 0 PASSED, 0 SKIPPED, 2 FAILED After fix: # ./test_verifier 1186 #1186/u map access: trying to leak tained dst reg OK #1186/p map access: trying to leak tained dst reg OK Summary: 2 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-12-16bpf: Make 32->64 bounds propagation slightly more robustDaniel Borkmann1-9/+15
Make the bounds propagation in __reg_assign_32_into_64() slightly more robust and readable by aligning it similarly as we did back in the __reg_combine_64_into_32() counterpart. Meaning, only propagate or pessimize them as a smin/smax pair. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-12-16bpf: Fix signed bounds propagation after mov32Daniel Borkmann1-0/+4
For the case where both s32_{min,max}_value bounds are positive, the __reg_assign_32_into_64() directly propagates them to their 64 bit counterparts, otherwise it pessimises them into [0,u32_max] universe and tries to refine them later on by learning through the tnum as per comment in mentioned function. However, that does not always happen, for example, in mov32 operation we call zext_32_to_64(dst_reg) which invokes the __reg_assign_32_into_64() as is without subsequent bounds update as elsewhere thus no refinement based on tnum takes place. Thus, not calling into the __update_reg_bounds() / __reg_deduce_bounds() / __reg_bound_offset() triplet as we do, for example, in case of ALU ops via adjust_scalar_min_max_vals(), will lead to more pessimistic bounds when dumping the full register state: Before fix: 0: (b4) w0 = -1 1: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=4294967295,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) 1: (bc) w0 = w0 2: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=0,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) Technically, the smin_value=0 and smax_value=4294967295 bounds are not incorrect, but given the register is still a constant, they break assumptions about const scalars that smin_value == smax_value and umin_value == umax_value. After fix: 0: (b4) w0 = -1 1: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=4294967295,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) 1: (bc) w0 = w0 2: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=4294967295,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) Without the smin_value == smax_value and umin_value == umax_value invariant being intact for const scalars, it is possible to leak out kernel pointers from unprivileged user space if the latter is enabled. For example, when such registers are involved in pointer arithmtics, then adjust_ptr_min_max_vals() will taint the destination register into an unknown scalar, and the latter can be exported and stored e.g. into a BPF map value. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Kuee K1r0a <liulin063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-12-16arm64: kexec: Fix missing error code 'ret' warning in load_other_segments()Lakshmi Ramasubramanian1-0/+1
Since commit ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()"), smatch reports the following warning: arch/arm64/kernel/machine_kexec_file.c:152 load_other_segments() warn: missing error code 'ret' Return code is not set to an error code in load_other_segments() when of_kexec_alloc_and_setup_fdt() call returns a NULL dtb. This results in status success (return code set to 0) being returned from load_other_segments(). Set return code to -EINVAL if of_kexec_alloc_and_setup_fdt() returns NULL dtb. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()") Link: https://lore.kernel.org/r/20211210010121.101823-1-nramas@linux.microsoft.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-12-16afs: Fix mmapDavid Howells2-2/+4
Fix afs_add_open_map() to check that the vnode isn't already on the list when it adds it. It's possible that afs_drop_open_mmap() decremented the cb_nr_mmap counter, but hadn't yet got into the locked section to remove it. Also vnode->cb_mmap_link should be initialised, so fix that too. Fixes: 6e0e99d58a65 ("afs: Fix mmap coherency vs 3rd-party changes") Reported-by: kafs-testing+fedora34_64checkkafs-build-300@auristor.com Suggested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: kafs-testing+fedora34_64checkkafs-build-300@auristor.com cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/686465.1639435380@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-16sit: do not call ipip6_dev_free() from sit_init_net()Eric Dumazet1-1/+0
ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong. Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy. syzbot reported: dst_release underflow WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173 Modules linked in: CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173 Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48 RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246 RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000 RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358 R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000 FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160 ipip6_dev_free net/ipv6/sit.c:1414 [inline] sit_init_net+0x229/0x550 net/ipv6/sit.c:1936 ops_init+0x313/0x430 net/core/net_namespace.c:140 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075 __do_sys_unshare kernel/fork.c:3146 [inline] __se_sys_unshare kernel/fork.c:3144 [inline] __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f66c882ce99 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200 RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000 </TASK> Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211216111741.1387540-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli2-1/+5
The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16net/smc: Prevent smc_release() from long blockingD. Wythe1-1/+3
In nginx/wrk benchmark, there's a hung problem with high probability on case likes that: (client will last several minutes to exit) server: smc_run nginx client: smc_run wrk -c 10000 -t 1 http://server Client hangs with the following backtrace: 0 [ffffa7ce8Of3bbf8] __schedule at ffffffff9f9eOd5f 1 [ffffa7ce8Of3bc88] schedule at ffffffff9f9eløe6 2 [ffffa7ce8Of3bcaO] schedule_timeout at ffffffff9f9e3f3c 3 [ffffa7ce8Of3bd2O] wait_for_common at ffffffff9f9el9de 4 [ffffa7ce8Of3bd8O] __flush_work at ffffffff9fOfeOl3 5 [ffffa7ce8øf3bdfO] smc_release at ffffffffcO697d24 [smc] 6 [ffffa7ce8Of3be2O] __sock_release at ffffffff9f8O2e2d 7 [ffffa7ce8Of3be4ø] sock_close at ffffffff9f8ø2ebl 8 [ffffa7ce8øf3be48] __fput at ffffffff9f334f93 9 [ffffa7ce8Of3be78] task_work_run at ffffffff9flOlff5 10 [ffffa7ce8Of3beaO] do_exit at ffffffff9fOe5Ol2 11 [ffffa7ce8Of3bflO] do_group_exit at ffffffff9fOe592a 12 [ffffa7ce8Of3bf38] __x64_sys_exit_group at ffffffff9fOe5994 13 [ffffa7ce8Of3bf4O] do_syscall_64 at ffffffff9f9d4373 14 [ffffa7ce8Of3bfsO] entry_SYSCALL_64_after_hwframe at ffffffff9fa0007c This issue dues to flush_work(), which is used to wait for smc_connect_work() to finish in smc_release(). Once lots of smc_connect_work() was pending or all executing work dangling, smc_release() has to block until one worker comes to free, which is equivalent to wait another smc_connnect_work() to finish. In order to fix this, There are two changes: 1. For those idle smc_connect_work(), cancel it from the workqueue; for executing smc_connect_work(), waiting for it to finish. For that purpose, replace flush_work() with cancel_work_sync(). 2. Since smc_connect() hold a reference for passive closing, if smc_connect_work() has been cancelled, release the reference. Fixes: 24ac3a08e658 ("net/smc: rebuild nonblocking connect") Reported-by: Tony Lu <tonylu@linux.alibaba.com> Tested-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/1639571361-101128-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16net: Fix double 0x prefix print in SKB dumpGal Pressman1-1/+1
When printing netdev features %pNF already takes care of the 0x prefix, remove the explicit one. Fixes: 6413139dfc64 ("skbuff: increase verbosity when dumping skb data") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-03 13:44:44 +0000