aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/stackcollapse.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-22drm/ast: change resolution may cause screen blurredY.C. Chen1-0/+1
The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Cc: <stable@vger.kernel.org> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-11-21drm/i915: Add rotation readout for plane initial configVille Syrjälä2-0/+32
If we need to force a full plane update before userspace/fbdev have given us a proper plane state we should try to maintain the current plane state as much as possible (apart from the parts of the state we're trying to fix up with the plane update). To that end add basic readout for the plane rotation and maintain it during the initial fb takeover. Cc: Hans de Goede <hdegoede@redhat.com> Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit f43348a3db89305bb1935da9fe4499fdcdde9796) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-21drm/i915: Force a LUT update in intel_initial_commit()Ville Syrjälä1-0/+8
If we force a plane update to fix up our half populated plane state we'll also force on the pipe gamma for the plane (since we always enable pipe gamma currently). If the BIOS hasn't programmed a sensible LUT into the hardware this will cause the image to become corrupted. Typical symptoms are a purple/yellow/etc. flash when the driver loads. To avoid this let's program something sensible into the LUT when we do the plane update. In the future I plan to add proper plane gamma enable readout so this is just a temporary measure. Cc: Hans de Goede <hdegoede@redhat.com> Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit fa6af5145b4e87a30a530be0d80734a9dd40da77) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-21drm/fb-helper: Blacklist writeback when adding connectors to fbdevPaul Kocialkowski1-0/+3
Writeback connectors do not produce any on-screen output and require special care for use. Such connectors are hidden from enumeration in DRM resources by default, but they are still picked-up by fbdev. This makes rather little sense since fbdev is not really adapted for dealing with writeback. Moreover, this is also a source of issues when userspace disables the CRTC (and associated plane) without detaching the CRTC from the connector (which is hidden by default). In this case, the connector is still using the CRTC, leading to am "enabled/connectors mismatch" and eventually the failure of the associated atomic commit. This situation happens with VC4 testing under IGT GPU Tools. Filter out writeback connectors in the fbdev helper to solve this. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Fixes: 935774cd71fe ("drm: Add writeback connector type") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com
2018-11-21drm/i915: Write GPU relocs harder with gen3Chris Wilson1-1/+6
Under moderate amounts of GPU stress, we can observe on Bearlake and Pineview (later gen3 models) that we execute the following batch buffer before the write into the batch is coherent. Adding extra (tested with upto 32x) MI_FLUSH to either the invalidation, flush or both phases does not solve the incoherency issue with the relocations, but emitting the MI_STORE_DWORD_IMM twice does. So be it. Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk (cherry picked from commit 7fa28e146994da1e8a4124623d7da97b798ea520) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-20drm/amdgpu: Enable HDP memory light sleepKenneth Feng1-7/+32
Due to the register name and setting change of HDP memory light sleep on Vega20,change accordingly in the driver. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-20drm/i915: Prevent machine hang from Broxton's vtd w/a and error captureChris Wilson3-2/+26
Since capturing the error state requires fiddling around with the GGTT to read arbitrary buffers and is itself run under stop_machine(), it deadlocks the machine (effectively a hard hang) when run in conjunction with Broxton's VTd workaround to serialize GGTT access. v2: Store the ERR_PTR in first_error so that the error can be reported to the user via sysfs. v3: Mention the quirk in dmesg (using info as per usual) Fixes: 0ef34ad6222a ("drm/i915: Serialize GTT/Aperture accesses on BXT") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-5-chris@chris-wilson.co.uk (cherry picked from commit fb6f0b64e455b207a636346588e65bf9598d30eb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-19drm/amd/pp: handle negative values when reading ODGreathouse, Joseph4-46/+40
Reading the sysfs files pp_sclk_od and pp_mclk_od return the percentage difference between the VBIOS-provided default frequency and the current (possibly user-set) frequency in the highest SCLK and MCLK DPM states, respectively. Writing to these files provides an easy mechanism for setting a higher-than-default maximum frequency. We normally only allow values >= 0 to be written here. However, with the addition of pp_od_clk_voltage, we now allow users to set custom DPM tables. If they then set the maximum DPM state to something less than the default, later reads of pp_*_od should return a negative value. The highest DPM state is now less than the VBIOS-provided default, so the percentage is negative. The math to calculate this was originally performed with unsigned values, meaning reads that should return negative values returned meaningless data. This patch corrects that issue and normalizes how all of the calculations are done across the various hwmgr types. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amdgpu: Add missing firmware entry for HAINANTakashi Iwai1-0/+1
Due to lack of MODULE_FIRMWARE() with hainan_mc.bin, the driver doesn't work properly in initrd. Let's add it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1116239 Fixes: 8eaf2b1faaf4 ("drm/amdgpu: switch firmware path for SI parts") Cc: <stable@vger.kernel.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/powerplay: disable Vega20 DS related featuresEvan Quan1-1/+11
Disable these features on Vega20 for now. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Feifei Xu<Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unsetFelix Kuehling1-2/+5
On Vega20 and other pre-production GPUs, powerplay is not enabled yet. Check for NULL pointers before calling pp_funcs function pointers. Also affects Kaveri. CC: Joerg Roedel <jroedel@suse.de> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-11-19drm/i915: Disable LP3 watermarks on all SNB machinesVille Syrjälä1-1/+40
I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com (cherry picked from commit 03981c6ebec4fc7056b9b45f847393aeac90d060) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-19drm/ast: Remove existing framebuffers before loading driverThomas Zimmermann1-0/+21
If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> Tested-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-11-18Linux 4.20-rc3v4.20-rc3Linus Torvalds1-1/+1
2018-11-18mm/memblock.c: fix a typo in __next_mem_pfn_range() commentsChen Chang1-1/+1
Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.com Signed-off-by: Chen Chang <rainccrun@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18mm, page_alloc: check for max order in hot pathMichal Hocko1-11/+9
Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by: Kyungtae Kim <kt0755@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Byoungyoung Lee <lifeasageek@gmail.com> Cc: "Dae R. Jeong" <threeearcat@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18scripts/spdxcheck.py: make python3 compliantUwe Kleine-König1-1/+0
Without this change the following happens when using Python3 (3.6.6): $ echo "GPL-2.0" | python3 scripts/spdxcheck.py - FAIL: 'str' object has no attribute 'decode' Traceback (most recent call last): File "scripts/spdxcheck.py", line 253, in <module> parser.parse_lines(sys.stdin, args.maxlines, '-') File "scripts/spdxcheck.py", line 171, in parse_lines line = line.decode(locale.getpreferredencoding(False), errors='ignore') AttributeError: 'str' object has no attribute 'decode' So as the line is already a string, there is no need to decode it and the line can be dropped. /usr/bin/python on Arch is Python 3. So this would indeed be worth going into 4.19. Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Perches <joe@perches.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offsetYufen Yu1-3/+1
Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturnArnd Bergmann1-2/+1
gcc-8 complains about the prototype for this function: lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes] This is actually a GCC's bug. In GCC internals __ubsan_handle_builtin_unreachable() declared with both 'noreturn' and 'const' attributes instead of only 'noreturn': https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210 Workaround this by removing the noreturn attribute. [aryabinin: add information about GCC bug in changelog] Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Olof Johansson <olof@lixom.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18mm/vmstat.c: fix NUMA statistics updatesJanne Huttunen1-3/+4
Scan through the whole array to see if an update is needed. While we're at it, use sizeof() to be safe against any possible type changes in the future. The bug here is that we wouldn't sync per-cpu counters into global ones if there was an update of numa_stats for higher cpus. Highly theoretical one though because it is much more probable that zone_stats are updated so we would refresh anyway. So I wouldn't bother to mark this for stable, yet something nice to fix. [mhocko@suse.com: changelog enhancement] Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com Fixes: 1d90ca897cb0 ("mm: update NUMA counter threshold size") Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18mm/gup.c: fix follow_page_mask() kerneldoc commentMike Rapoport1-2/+8
Commit df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages") modified the signature of follow_page_mask() but left the parameter description behind. Update the description to make the code and comments agree again. While at it, update formatting of the return value description to match Documentation/doc-guide/kernel-doc.rst guidelines. Link: http://lkml.kernel.org/r/1541603316-27832-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18ocfs2: free up write context when direct IO failedWengang Wang2-2/+19
The write context should also be freed even when direct IO failed. Otherwise a memory leak is introduced and entries remain in oi->ip_unwritten_list causing the following BUG later in unlink path: ERROR: bug expression: !list_empty(&oi->ip_unwritten_list) ERROR: Clear inode of 215043, inode has unwritten extents ... Call Trace: ? __set_current_blocked+0x42/0x68 ocfs2_evict_inode+0x91/0x6a0 [ocfs2] ? bit_waitqueue+0x40/0x33 evict+0xdb/0x1af iput+0x1a2/0x1f7 do_unlinkat+0x194/0x28f SyS_unlinkat+0x1b/0x2f do_syscall_64+0x79/0x1ae entry_SYSCALL_64_after_hwframe+0x151/0x0 This patch also logs, with frequency limit, direct IO failures. Link: http://lkml.kernel.org/r/20181102170632.25921-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18scripts/faddr2line: fix location of start_kernel in commentRandy Dunlap1-1/+1
Fix a source file reference location to the correct path name. Link: http://lkml.kernel.org/r/1d50bd3d-178e-dcd8-779f-9711887440eb@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18mm: don't reclaim inodes with many attached pagesRoman Gushchin1-2/+5
Spock reported that commit 172b06c32b94 ("mm: slowly shrink slabs with a relatively small number of objects") leads to a regression on his setup: periodically the majority of the pagecache is evicted without an obvious reason, while before the change the amount of free memory was balancing around the watermark. The reason behind is that the mentioned above change created some minimal background pressure on the inode cache. The problem is that if an inode is considered to be reclaimed, all belonging pagecache page are stripped, no matter how many of them are there. So, if a huge multi-gigabyte file is cached in the memory, and the goal is to reclaim only few slab objects (unused inodes), we still can eventually evict all gigabytes of the pagecache at once. The workload described by Spock has few large non-mapped files in the pagecache, so it's especially noticeable. To solve the problem let's postpone the reclaim of inodes, which have more than 1 attached page. Let's wait until the pagecache pages will be evicted naturally by scanning the corresponding LRU lists, and only then reclaim the inode structure. Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Spock <dairinin@gmail.com> Tested-by: Spock <dairinin@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> [4.19.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18mm, memory_hotplug: check zone_movable in has_unmovable_pagesMichal Hocko1-0/+8
Page state checks are racy. Under a heavy memory workload (e.g. stress -m 200 -t 2h) it is quite easy to hit a race window when the page is allocated but its state is not fully populated yet. A debugging patch to dump the struct page state shows has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0 page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1 flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked) Note that the state has been checked for both PageLRU and PageSwapBacked already. Closing this race completely would require some sort of retry logic. This can be tricky and error prone (think of potential endless or long taking loops). Workaround this problem for movable zones at least. Such a zone should only contain movable pages. Commit 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust") has told us that this is not strictly true though. Bootmem pages should be marked reserved though so we can move the original check after the PageReserved check. Pages from other zones are still prone to races but we even do not pretend that memory hotremove works for those so pre-mature failure doesn't hurt that much. Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org Fixes: 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18mm/swapfile.c: use kvzalloc for swap_info_struct allocationVasily Averin1-3/+3
Commit a2468cc9bfdf ("swap: choose swap device according to numa node") changed 'avail_lists' field of 'struct swap_info_struct' to an array. In popular linux distros it increased size of swap_info_struct up to 40 Kbytes and now swap_info_struct allocation requires order-4 page. Switch to kvzmalloc allows to avoid unexpected allocation failures. Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18MAINTAINERS: update OMAP MMC entryAaro Koskinen2-2/+6
Jarkko's e-mail address hasn't worked for a long time. We still want to keep this driver working as it is critical for some of the OMAP boards. I use and test this driver frequently, so change myself as a maintainer with "Odd Fixes" status. Link: http://lkml.kernel.org/r/20181106222750.12939-1-aaro.koskinen@iki.fi Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!Mike Kravetz1-4/+19
This bug has been experienced several times by the Oracle DB team. The BUG is in remove_inode_hugepages() as follows: /* * If page is mapped, it was faulted in after being * unmapped in caller. Unmap (again) now after taking * the fault mutex. The mutex will prevent faults * until we finish removing the page. * * This race can only happen in the hole punch case. * Getting here in a truncate operation is a bug. */ if (unlikely(page_mapped(page))) { BUG_ON(truncate_op); In this case, the elevated map count is not the result of a race. Rather it was incorrectly incremented as the result of a bug in the huge pmd sharing code. Consider the following: - Process A maps a hugetlbfs file of sufficient size and alignment (PUD_SIZE) that a pmd page could be shared. - Process B maps the same hugetlbfs file with the same size and alignment such that a pmd page is shared. - Process B then calls mprotect() to change protections for the mapping with the shared pmd. As a result, the pmd is 'unshared'. - Process B then calls mprotect() again to chage protections for the mapping back to their original value. pmd remains unshared. - Process B then forks and process C is created. During the fork process, we do dup_mm -> dup_mmap -> copy_page_range to copy page tables. Copying page tables for hugetlb mappings is done in the routine copy_hugetlb_page_range. In copy_hugetlb_page_range(), the destination pte is obtained by: dst_pte = huge_pte_alloc(dst, addr, sz); If pmd sharing is possible, the returned pointer will be to a pte in an existing page table. In the situation above, process C could share with either process A or process B. Since process A is first in the list, the returned pte is a pointer to a pte in process A's page table. However, the check for pmd sharing in copy_hugetlb_page_range is: /* If the pagetables are shared don't copy or take references */ if (dst_pte == src_pte) continue; Since process C is sharing with process A instead of process B, the above test fails. The code in copy_hugetlb_page_range which follows assumes dst_pte points to a huge_pte_none pte. It copies the pte entry from src_pte to dst_pte and increments this map count of the associated page. This is how we end up with an elevated map count. To solve, check the dst_pte entry for huge_pte_none. If !none, this implies PMD sharing so do not copy. Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18kernel/sched/psi.c: simplify cgroup_move_task()Olof Johansson1-21/+22
The existing code triggered an invalid warning about 'rq' possibly being used uninitialized. Instead of doing the silly warning suppression by initializa it to NULL, refactor the code to bail out early instead. Warning was: kernel/sched/psi.c: In function `cgroup_move_task': kernel/sched/psi.c:639:13: warning: `rq' may be used uninitialized in this function [-Wmaybe-uninitialized] Link: http://lkml.kernel.org/r/20181103183339.8669-1-olof@lixom.net Fixes: 2ce7135adc9ad ("psi: cgroup support") Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18z3fold: fix possible reclaim racesVitaly Wool1-39/+62
Reclaim and free can race on an object which is basically fine but in order for reclaim to be able to map "freed" object we need to encode object length in the handle. handle_to_chunks() is then introduced to extract object length from a handle and use it during mapping. Moreover, to avoid racing on a z3fold "headless" page release, we should not try to free that page in z3fold_free() if the reclaim bit is set. Also, in the unlikely case of trying to reclaim a page being freed, we should not proceed with that page. While at it, fix the page accounting in reclaim function. This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups". Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.com Signed-off-by: Vitaly Wool <vitaly.vul@sony.com> Signed-off-by: Jongseok Kim <ks77sj@gmail.com> Reported-by-by: Jongseok Kim <ks77sj@gmail.com> Reviewed-by: Snild Dolkow <snild@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16gfs2: Fix iomap buffer head reference counting bugAndreas Gruenbacher1-23/+17
GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to gfs2_iomap_end in iomap->private. It sets that private pointer in gfs2_iomap_get. Users of gfs2_iomap_get other than gfs2_iomap_begin would have to release iomap->private, but this isn't done correctly, leading to a leak of buffer head references. To fix this, move the code for setting iomap->private from gfs2_iomap_get to gfs2_iomap_begin. Fixes: 64bc06bb32 ("gfs2: iomap buffered write support") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16udmabuf: set read/write flag when exportingGerd Hoffmann1-0/+1
Otherwise, mmap fails when done with PROT_WRITE. Suggested-by: Gurchetan Singh <gurchetansingh@chromium.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20181114122029.16766-1-kraxel@redhat.com
2018-11-15drm/amd/display: Support amdgpu "max bpc" connector property (v2)Nicholas Kazlauskas2-0/+17
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch adds support for getting and setting the amdgpu driver specific "max bpc" property on the connector. It also adds support for limiting the output bpc based on the property value. The default limitation is the lowest value in the range, 8bpc. This was the old value before the range was uncapped. This patch should be updated/replaced later once common drm support for max bpc lands. Bugzilla: https://bugs.freedesktop.org/108542 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645 Fixes: e03fd3f300f6 ("drm/amd/display: Do not limit color depth to 8bpc") v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-15drm/amdgpu: Add amdgpu "max bpc" connector property (v2)Nicholas Kazlauskas2-0/+9
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch introduces the "max bpc" amdgpu driver specific connector property so the user can limit the maximum bpc. It ranges from 8 to 16. This doesn't directly set the preferred bpc for the panel since it follows Intel's existing driver conventions. This proprety should be removed once common drm support for max bpc lands. v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-15drm/vc4: Set ->legacy_cursor_update to false when doing non-async updatesBoris Brezillon1-0/+6
drm_atomic_helper_setup_commit() auto-completes commit->flip_done when state->legacy_cursor_update is true, but we know for sure that we want a sync update when we call drm_atomic_helper_setup_commit() from vc4_atomic_commit(). Explicitly set state->legacy_cursor_update to false to prevent this auto-completion. Fixes: 184d3cf4f738 ("drm/vc4: Use wait_for_flip_done() instead of wait_for_vblanks()") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-2-boris.brezillon@bootlin.com
2018-11-15drm/vc4: Fix NULL pointer dereference in the async update pathBoris Brezillon1-2/+13
vc4_plane_atomic_async_update() calls vc4_plane_atomic_check() which in turn calls vc4_plane_setup_clipping_and_scaling(), and since commit 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic"), this function accesses plane_state->state which will be NULL when called from the async update path because we're passing the current plane state, and plane_state->state has been assigned to NULL in drm_atomic_helper_swap_state(). Pass the new state instead of the current one (the new state has ->state set to a non-NULL value). Fixes: 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-1-boris.brezillon@bootlin.com
2018-11-15selftests/powerpc: Adjust wild_bctr to build with old binutilsGustavo Romero1-2/+3
Currently the selftest wild_bctr can fail to build when an old gcc is used, notably on gcc using a binutils version <= 2.27, because the assembler does not support the integer suffix UL. This patch adjusts the wild_bctr test so the REG_POISON value is still treated as an unsigned long for the shifts on compilation but the UL suffix is absent on the stringification, so the inline asm code generated has no UL suffixes. Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> [mpe: Wrap long line] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-15drm/i915: Account for scale factor when calculating initial phaseVille Syrjälä3-10/+57
To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit e7a278a329dd8aa2c70c564849f164cb5673689c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15drm/i915: Clean up skl_program_scaler()Ville Syrjälä1-12/+5
Remove the "sizes are 0 based" stuff that is not even true for the scaler. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit d0105af939769393d6447a04cee2d1ae12e3f09a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15drm/i915: Move programming plane scaler to its own function.Maarten Lankhorst1-38/+52
This cleans the code up slightly, and will make other changes easier. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com (cherry picked from commit ab5c60bf76755d24ae8de5c1c6ac594934656ace) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15efi: Permit calling efi_mem_reserve_persistent() from atomic contextArd Biesheuvel1-12/+19
Currently, efi_mem_reserve_persistent() may not be called from atomic context, since both the kmalloc() call and the memremap() call may sleep. The kmalloc() call is easy enough to fix, but the memremap() call needs to be moved into an init hook since we cannot control the memory allocation behavior of memremap() at the call site. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi/arm: Defer persistent reservations until after paging_init()Ard Biesheuvel4-0/+15
The new memory EFI reservation feature we introduced to allow memory reservations to persist across kexec may trigger an unbounded number of calls to memblock_reserve(). The memblock subsystem can deal with this fine, but not before memblock resizing is enabled, which we can only do after paging_init(), when the memory we reallocate the array into is actually mapped. So break out the memreserve table processing into a separate routine and call it after paging_init() on arm64. On ARM, because of limited reviewing bandwidth of the maintainer, we cannot currently fix this, so instead, disable the EFI persistent memreserve entirely on ARM so we can fix it later. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi/arm/libstub: Pack FDT after populating itArd Biesheuvel1-0/+4
Commit: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") increased the allocation size for the FDT image created by the stub to a fixed value of 2 MB, to simplify the former code that made several attempts with increasing values for the size. This is reasonable given that the allocation is of type EFI_LOADER_DATA, which is released to the kernel unless it is explicitly memblock_reserve()d by the early boot code. However, this allocation size leaked into the 'size' field of the FDT header metadata, and so the entire allocation remains occupied by the device tree binary, even if most of it is not used to store device tree information. So call fdt_pack() to shrink the FDT data structure to its minimum size after populating all the fields, so that the remaining memory is no longer wasted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.12+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi/arm: Revert deferred unmap of early memmap mappingArd Biesheuvel3-1/+8
Commit: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15efi: Fix debugobjects warning on 'efi_rts_work'Waiman Long1-1/+1
The following commit: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") converted 'efi_rts_work' from an auto variable to a global variable. However, when submitting the work, INIT_WORK_ONSTACK() was still used, causing the following complaint from debugobjects: ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated. Change the macro to just INIT_WORK() to eliminate the warning. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-15powerpc/64: Fix kernel stack 16-byte alignmentNicholas Piggin2-0/+3
Commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8, which causes the interrupt frame allocation on kernel entry to put the kernel stack out of alignment. Quadword (16-byte) alignment for the stack is required by both the 64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1). Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this in future. Fixes: 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-14SCSI: fix queue cleanup race before queue initialization is doneMing Lei2-3/+10
c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has already fixed this race, however the implied synchronize_rcu() in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused performance regression. Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") tried to quiesce queue for avoiding unnecessary synchronize_rcu() only when queue initialization is done, because it is usual to see lots of inexistent LUNs which need to be probed. However, turns out it isn't safe to quiesce queue only when queue initialization is done. Because when one SCSI command is completed, the user of sending command can be waken up immediately, then the scsi device may be removed, meantime the run queue in scsi_end_request() is still in-progress, so kernel panic can be caused. In Red Hat QE lab, there are several reports about this kind of kernel panic triggered during kernel booting. This patch tries to address the issue by grabing one queue usage counter during freeing one request and the following run queue. Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") Cc: Andrew Jones <drjones@redhat.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Cc: jianchao.wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14block: fix 32 bit overflow in __blkdev_issue_discard()Dave Chinner1-1/+3
A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to fall into an endless loop in the discard code. The test is creating a device that is exactly 2^32 sectors in size to test mkfs boundary conditions around the 32 bit sector overflow region. mkfs issues a discard for the entire device size by default, and hence this throws a sector count of 2^32 into blkdev_issue_discard(). It takes the number of sectors to discard as a sector_t - a 64 bit value. The commit ba5d73851e71 ("block: cleanup __blkdev_issue_discard") takes this sector count and casts it to a 32 bit value before comapring it against the maximum allowed discard size the device has. This truncates away the upper 32 bits, and so if the lower 32 bits of the sector count is zero, it starts issuing discards of length 0. This causes the code to fall into an endless loop, issuing a zero length discards over and over again on the same sector. Fixes: ba5d73851e71 ("block: cleanup __blkdev_issue_discard") Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Killed pointless WARN_ON(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14drm/i915/icl: Drop spurious register read from icl_dbuf_slices_updateMika Kuoppala1-3/+1
Register DBUF_CTL_S2 is read and it's value is not used. As there is no explanation why we should prime the hardware with read, remove it as spurious. Fixes: aa9664ffe863 ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com (cherry picked from commit 8577c319b6511fbc391f3775225fecd8b979bc26) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-14drm/i915: fix broadwell EU computationLionel Landwerlin1-1/+1
subslice_mask is an array indexed by slice, not subslice. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 8cc7669355136f ("drm/i915: store all subslice masks") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.com (cherry picked from commit 63ac3328f0d1d37f286e397b14d9596ed09d7ca5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-05 14:01:38 +0000