| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Blaize BLZP1600 uses the custom silicon provided from
VeriSilicon to add GPIO support.
This interface is used to control signals on many other
peripherals, such as Ethernet, USB, SD and eMMC.
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Link: https://lore.kernel.org/r/20250512133302.151621-1-nikolaos.pasaloukos@blaize.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the clock device tree bindings to yaml for the Altera SoCFPGA
Cyclone5, Arria5, and Arria10 chip families. Since the clock nodes are
subnodes to Altera SOCFPGA Clock Manager, the yaml was added to
socfpga-clk-manager.yaml.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add syscon node for the PMU Interrupt Generation registers.
Additionally update the exynos-pmu node to provide a phandle
to pmu-intr-gen syscon.
These registers are required for CPU hotplug to be functional.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-4-9f64a2657316@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-12-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-11-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-10-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-9-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-8-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert mx2{3,8} dts files to use the padconfig macros defined in
mxs-pinfunc.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add initial support for PHYTEC phyBOARD-Nash-i.MX93 board [1] based on
the PHYTEC phyCORE-i.MX93 SoM (System-on-Module) [2].
Supported board features:
* ADC
* CAN
* Ethernet
* EEPROM
* RTC
* RS-232/RS-485
* SD-card
* TPM 2.0
* USB
For more details see the product pages for the development kit and the
SoM:
[1] https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
[2] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add devicetree bindings for PHYTEC phyBOARD-Nash-i.MX93 board based on
the existing PHYTEC phyCORE-i.MX93 SoM (System-on-Module).
Adjust the compatibles for the existing phyBOARD-Segin-i.MX93 board, to
be able to add additional board based on the phyCORE-i.MX93 SoM.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use generic node name for the SoM GPIO expander, following the
Devicetree Specification generic node names recommendation.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add gpio expander node to the device tree and the related nodes.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the embedded controller node to the device tree, this is required
for reset and power-off functionalities.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Configure correctly the FAN pwm output (inverted).
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Using the MDIO pins with Open Drain causes spec violations of the
signals. Revert the changes.
This is similar to commit 14e66e4b13221 ("Revert "arm64: dts:
imx93-tqma9352-mba93xxca: enable Open Drain for MDIO"")
Fixes: e5bc07026f94 ("arm64: add initial device tree for TQMa93xx/MBa91xxCA")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa95xxSA is a SOM using NXP i.MX95 CPU. MB-SMARC-2 is a carrier
reference design.
[1] https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma95xxsa/
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add initial support for TQMa95xxSA module compatible to SMARC-2.
There is a common device tree for all variants with e.g. reduced CPU count.
It supports LPUART7 for console, CAN, PCIe I2C, SPI, USB3.0, USB2.0, Audio,
SDHC1/2 and QSPI as storage.
[1] https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma95xxsa/
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update accepted voltage levels according to IMX7DCEC Table 9 Operating ranges
Signed-off-by: Efe Can İçöz <efecanicoz@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx7d-remarkable2.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx8mm-var-som-symphony.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds support for TQMa8XQPS and TQMa8XDPS modules on MB-SMARC-2 board.
As the only difference is the mounted SoC, both module and baseboard
files are shared.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa8XxS is a SOM series featuring NXP i.MX8X SoC.
They are called TQMa8XQPS and TQMa8XDPS respectively.
MB-SMARC-2 is a carrier reference design.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This overlay configures IMX219 MIPI-CSI-2 camera attached to ISP1.
Also add additional overlay both using LVDS display and camera.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds an overlay for the supported LVDS display tianma tm070jvhg33.
The LVDS interface is the same as for MBa8MPxL so the already existing
overlay can be reused on this platform.
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the minimal board dts support for i.MX943 EVK. Only the console uart,
SD & eMMC are enabled for linux basic boot.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the minimal dtsi support for i.MX943. i.MX943 is the first SoC of
i.MX94 Family, create a common dtsi for the whole i.MX94 family, and the
specific dtsi part for i.MX943.
The clock, power domain and perf index need to be used by the device nodes
for resource reference, add them along with the dtsi support.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible string for NXP i.MX943 EVK board.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TechNexion TEVI OV5640 camera is a 5MP camera that can be used with
J722S EVM through the 22-pin CSI-RX connector. Add a reference overlay
for quad TEVI OV5640 modules on J722S EVM.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250509091911.2442934-5-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
RPi v2 Camera (IMX219) is an 8MP camera that can be used with J722S EVM
through the 22-pin CSI-RX connector. Add a reference overlay for quad
IMX219 RPI camera v2 modules on J722S EVM
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250509091911.2442934-4-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
J722S EVM has the CSI2RX routed to a MIPI CSI connector and to 22-pin RPi
camera connector through an analog mux with GPIO control, model mux so
that an overlay can control the mux state according to connected cameras.
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250509091911.2442934-3-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add device tree nodes for two regulators on the J722S-EVM. VSYS_3V3 is the
output of LM5141-Q1, and it serves as an input to TPS22990 which produces
VSYS_3V3_EXP [1]. VSYS_3V3_EXP serves as vin-supply to CSI RPI Connectors.
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
[1]: https://www.ti.com/lit/zip/sprr495
Link: https://lore.kernel.org/r/20250509091911.2442934-2-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
C7x DSP uses main_timer2, so mark it as reserved in linux DT.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250507070008.1231611-5-d.schultz@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The main rti4 watchdog timer is used by the C7x DSP, so reserve the
timer in the linux device tree.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250507070008.1231611-4-d.schultz@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
For every remote processor, set up dedicated memory regions and
associate the required mailbox channels. Allocate two memory areas
per remote core: one 1MB region for vring shared buffers, and
another for external memory used by the remote processor for its
resource table and trace buffer.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250507070008.1231611-3-d.schultz@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
For every remote processor, set up dedicated memory regions and
associate the required mailbox channels. Allocate two memory areas
per remote core: one 1MB region for vring shared buffers, and
another for external memory used by the remote processor for its
resource table and trace buffer.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250507070008.1231611-2-d.schultz@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Rename 'main0_thermal_trip0' to a more descriptive name that
includes 'fan', as the current name is too generic for a fan control
trip point.
Move the fan to a new cooling map to avoid overwriting the passive
trip point used for CPU frequency throttling when this overlay is
enabled. Also, add the fan to the existing cooling map.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20250506114134.3514899-2-d.schultz@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Enable throttling down the CPU frequency when an alert temperature
threshold (lower than the critical threshold) is reached.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250506114134.3514899-1-d.schultz@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
J721E SoM has MT25QU512AB Serial NOR flash connected to
OSPI1 controller. Enable ospi1 node in device tree.
Fixes: 73676c480b72 ("arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level")
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
Link: https://lore.kernel.org/r/20250507050701.3007209-1-p-mantena@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The needed drivers to support PCIe for i.MX 8QXP have been
added.
Configure PCIe for the Colibri iMX8X SoM.
The pcieb block is connected to the on module Wi-Fi/BT module.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Move pinctrl_uart1 to keep nodes in alphabetical order. No functional
changes.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the carrier-board Micrel KSZ8081 Ethernet PHY. This is a
10/100Mbit PHY connected to the EQOS interface and shares MDIO bus with
the Ethernet PHY located on the SoM (FEC interface).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for I2S audio found on phyBOARD-Segin-i.MX93. Audio codec
TLV320AIC3007 is connected to SAI1 interface as a DAI master. MCLK is
provided from the SAI's internal audio PLL (19.2 MHz).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for both USB controllers. Set first controller in OTG mode
(USB micro-AB connector X8) and the second one in host mode (USB type A
connector X7) by default.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for CAN networking on phyBOARD-Segin-i.MX93 via the flexcan1
interface. The CAN PHY chip SN65HVD234D used on the board is compatible
with the TCAN1043 driver using the generic "can-transceiver-phy" and is
capable of up to 1Mbps data rate.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for RTC connected via I2C on phyBOARD-Segin-i.MX93. Set
default RTC by configuring the aliases.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
ERR052021
Implement fix for i.MX 93 silicon errata ERR052021.
ERR052021 uSDHC: Sometimes uSDHC does not work under VDD_SOC low
drive mode and nominal mode
Description:
uSDHC PADs have one integration issue.
When CMD/DATA lines direction change from output to input, uSDHC
controller begin sampling, the integration issue will make input
enable signal from uSDHC propagated to the PAD with a long delay,
thus the new input value on the pad comes to uSDHC lately. The
uSDHC sampled the old input value and the sampling result is wrong.
Workaround:
Set uSDHC CMD/DATA PADs iomux register SION bit to 1, then PADs will
propagate input to uSDHC with no delay, so correct value is sampled.
This issue will wrongly trigger the start bit when sample the USDHC
command response, cause the USDHC trigger command CRC/index/endbit
error, which will finally impact the tuning pass window, especially
will impact the standard tuning logic, and can't find a correct delay
cell to get the best timing.
Based on commit bb89601282fc ("arm64: dts: imx93-11x11-evk: set SION for
cmd and data pad of USDHC").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Until now, all usdhc2 (SD-card) pinctrl labels pointed to one pinctrl
group "usdhc2grp" which was overwritten twice by the 100 and 200 MHz
modes. Fix this by using unique pinctrl names.
Additionally, adjust MX93_PAD_SD2_CLK__USDHC2_CLK pad drive-strength
according to values obtained by measurements from the PHYTEC hardware
department to improve signal integrity.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add disable-wp flag (write-protect) to usdhc2 node (SD-card) to get rid
of the following kernel boot warning:
host does not support reading read-only switch, assuming write-enable
Micro SD cards can't be physically write-protected like full-sized
cards anyways.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop redundant 'no-1-8-v' flag from usdhc1 (eMMC) node. Flag is now set
by default in the SOM include file (imx93-phycore-som.dtsi).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
