aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-04-11Dump the registers on undefined instruction userspace faultsRussell King1-0/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-11Btrfs: fix compile warnings on on avr32 platformWang Shilong1-1/+1
fs/btrfs/scrub.c: In function 'get_raid56_logic_offset': fs/btrfs/scrub.c:2269: warning: comparison of distinct pointer types lacks a cast fs/btrfs/scrub.c:2269: warning: right shift count >= width of type fs/btrfs/scrub.c:2269: warning: passing argument 1 of '__div64_32' from incompatible pointer type Since @rot is an int type, we should not use do_div(), fix it. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-04-10x86, calgary: Use 8M TCE table size by defaultWANG Chao1-12/+19
New kexec-tools wants to pass kdump kernel needed memmap via E820 directly, instead of memmap=exactmap. This makes saved_max_pfn not be passed down to 2nd kernel. To keep 1st kernel and 2nd kernel using the same TCE table size, Muli suggest to hard code the size to max (8M). We can't get rid of saved_max_pfn this time, for backward compatibility with old first kernel and new second kernel. However new first kernel and old second kernel can not work unfortunately. v2->v1: - retain saved_max_pfn so new 2nd kernel can work with old 1st kernel from Vivek Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: Jon Mason <jdmason@kudzu.us> Link: http://lkml.kernel.org/r/1394463120-26999-1-git-send-email-chaowang@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-04-10scsi: async sd resumeDan Williams6-30/+115
async_schedule() sd resume work to allow disks and other devices to resume in parallel. This moves the entirety of scsi_device resume to an async context to ensure that scsi_device_resume() remains ordered with respect to the completion of the start/stop command. For the duration of the resume, new command submissions (that do not originate from the scsi-core) will be deferred (BLKPREP_DEFER). It adds a new ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain) as a container of these operations. Like scsi_sd_probe_domain it is flushed at sd_remove() time to ensure async ops do not continue past the end-of-life of the sdev. The implementation explicitly refrains from reusing scsi_sd_probe_domain directly for this purpose as it is flushed at the end of dpm_resume(), potentially defeating some of the benefit. Given sdevs are quiesced it is permissible for these resume operations to bleed past the async_synchronize_full() calls made by the driver core. We defer the resolution of which pm callback to call until scsi_dev_type_{suspend|resume} time and guarantee that the callback parameter is never NULL. With this in place the type of resume operation is encoded in the async function identifier. There is a concern that async resume could trigger PSU overload. In the enterprise, storage enclosures enforce staggered spin-up regardless of what the kernel does making async scanning safe by default. Outside of that context a user can disable asynchronous scanning via a kernel command line or CONFIG_SCSI_SCAN_ASYNC. Honor that setting when deciding whether to do resume asynchronously. Inspired by Todd's analysis and initial proposal [2]: https://01.org/suspendresume/blogs/tebrandt/2013/hard-disk-resume-optimization-simpler-approach Cc: Len Brown <len.brown@intel.com> Cc: Phillip Susi <psusi@ubuntu.com> [alan: bug fix and clean up suggestion] Acked-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Todd Brandt <todd.e.brandt@linux.intel.com> [djbw: kick all resume work to the async queue] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-04-10regulator: bcm590xx: Set n_voltages for linear regTim Kryger1-0/+1
Fix the macro used to define linear range regulators to include the number of voltages. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Acked-by: Matt Porter <mporter@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-10AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERICChris Metcalf1-1/+1
On systems with CONFIG_COMPAT we introduced the new requirement that audit_classify_compat_syscall() exists. This wasn't true for everything (apparently not for "tilegx", which I know less that nothing about.) Instead of wrapping the preprocessor optomization with CONFIG_COMPAT we should have used the new CONFIG_AUDIT_COMPAT_GENERIC. This patch uses that config option to make sure only arches which intend to implement this have the requirement. This works fine for tilegx according to Chris Metcalf Signed-off-by: Eric Paris <eparis@redhat.com>
2014-04-10NVMe: Retry failed commands with non-fatal errorsKeith Busch4-96/+154
For commands returned with failed status, queue these for resubmission and continue retrying them until success or for a limited amount of time. The final timeout was arbitrarily chosen so requests can't be retried indefinitely. Since these are requeued on the nvmeq that submitted the command, the callbacks have to take an nvmeq instead of an nvme_dev as a parameter so that we can use the locked queue to append the iod to retry later. The nvme_iod conviently can be used to track how long we've been trying to successfully complete an iod request. The nvme_iod also provides the nvme prp dma mappings, so I had to move a few things around so we can keep those mappings. Signed-off-by: Keith Busch <keith.busch@intel.com> [fixed checkpatch issue with long line] Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-04-10NVMe: Add getgeo to block opsKeith Busch1-0/+11
Some programs require HDIO_GETGEO work, which requires we implement getgeo. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-04-10NVMe: Start-stop nvme_thread during device add-remove.Dan McLeran1-14/+42
Done to ensure nvme_thread is not running when there are no devices to poll. Signed-off-by: Dan McLeran <daniel.mcleran@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-04-10NVMe: Make I/O timeout a module parameterKeith Busch2-1/+6
Increase the default timeout to 30 seconds to match SCSI. Signed-off-by: Keith Busch <keith.busch@intel.com> [use byte instead of ushort] Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-04-10NVMe: CPU hot plug notificationKeith Busch2-0/+20
Registers with hot cpu notification to rebalance, and potentially allocate additional, io queues. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-04-10NVMe: per-cpu io queuesKeith Busch2-38/+172
The device's IO queues are associated with CPUs, so we can use a per-cpu variable to map the a qid to a cpu. This provides a convienient way to optimally assign queues to multiple cpus when the device supports fewer queues than the host has cpus. The previous implementation may have assigned these poorly in these situations. This patch addresses this by sharing queues among cpus that are "close" together and should have a lower lock contention penalty. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-04-10btrfs: allow mounting btrfs subvolumes with different ro/rw optionsHarald Hoyer1-0/+22
Given the following /etc/fstab entries: /dev/sda3 /mnt/foo btrfs subvol=foo,ro 0 0 /dev/sda3 /mnt/bar btrfs subvol=bar,rw 0 0 you can't issue: $ mount /mnt/foo $ mount /mnt/bar You would have to do: $ mount /mnt/foo $ mount -o remount,rw /mnt/foo $ mount --bind -o remount,ro /mnt/foo $ mount /mnt/bar or $ mount /mnt/bar $ mount --rw /mnt/foo $ mount --bind -o remount,ro /mnt/foo With this patch you can do $ mount /mnt/foo $ mount /mnt/bar $ cat /proc/self/mountinfo 49 33 0:41 /foo /mnt/foo ro,relatime shared:36 - btrfs /dev/sda3 rw,ssd,space_cache 87 33 0:41 /bar /mnt/bar rw,relatime shared:74 - btrfs /dev/sda3 rw,ssd,space_cache Signed-off-by: Chris Mason <clm@fb.com>
2014-04-10efi: Pass correct file handle to efi_file_{read,close}Matt Fleming2-9/+9
We're currently passing the file handle for the root file system to efi_file_read() and efi_file_close(), instead of the file handle for the file we wish to read/close. While this has worked up until now, it seems that it has only been by pure luck. Olivier explains, "The issue is the UEFI Fat driver might return the same function for 'fh->read()' and 'h->read()'. While in our case it does not work with a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our case, we return a different pointer when reading a directory and reading a file." Fixing this actually clears up the two functions because we can drop one of the arguments, and instead only pass a file 'handle' argument. Reported-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-10x86/efi: Correct EFI boot stub use of code32_startMatt Fleming3-14/+8
code32_start should point at the start of the protected mode code, and *not* at the beginning of the bzImage. This is much easier to do in assembly so document that callers of make_boot_params() need to fill out code32_start. The fallout from this bug is that we would end up relocating the image but copying the image at some offset, resulting in what appeared to be memory corruption. Reported-by: Thomas Bächler <thomas@archlinux.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-10x86/efi: Fix boot failure with EFI stubMatt Fleming1-1/+1
commit 54b52d872680 ("x86/efi: Build our own EFI services pointer table") introduced a regression because the 64-bit file_size() implementation passed a pointer to a 32-bit data object, instead of a pointer to a 64-bit object. Because the firmware treats the object as 64-bits regardless it was reading random values from the stack for the upper 32-bits. This resulted in people being unable to boot their machines, after seeing the following error messages, Failed to get file info size Failed to alloc highmem for files Reported-by: Dzmitry Sledneu <dzmitry.sledneu@gmail.com> Reported-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-10alienware-wmi: cover some scenarios where memory allocations would failMario Limonciello1-2/+10
Intel test builder caught a few instances that should test if kzalloc failed to allocate memory as well as a scenario that platform_driver wasn't properly initialized. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-04-09block: fix regression with block enabled taggingJens Axboe6-14/+24
Martin reported that his test system would not boot with current git, it oopsed with this: BUG: unable to handle kernel paging request at ffff88046c6c9e80 IP: [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 PGD 1ddf067 PUD 1de2067 PMD 47fc7d067 PTE 800000046c6c9060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: sd_mod lpfc(+) scsi_transport_fc scsi_tgt oracleasm rpcsec_gss_krb5 ipv6 igb dca i2c_algo_bit i2c_core hwmon CPU: 3 PID: 87 Comm: kworker/u17:1 Not tainted 3.14.0+ #246 Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 Workqueue: events_unbound async_run_entry_fn task: ffff8802743c2150 ti: ffff880273d02000 task.ti: ffff880273d02000 RIP: 0010:[<ffffffff812971e0>] [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP: 0018:ffff880273d03a58 EFLAGS: 00010092 RAX: ffff88046c6c9e78 RBX: ffff880077208e78 RCX: 00000000fffc8da6 RDX: 00000000fffc186d RSI: 0000000000000009 RDI: 00000000fffc8d9d RBP: ffff880273d03a88 R08: 0000000000000001 R09: ffff8800021c2410 R10: 0000000000000005 R11: 0000000000015b30 R12: ffff88046c5bb8a0 R13: ffff88046c5c0890 R14: 000000000000001e R15: 000000000000001e FS: 0000000000000000(0000) GS:ffff880277b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88046c6c9e80 CR3: 00000000018f6000 CR4: 00000000000407e0 Stack: ffff880273d03a98 ffff880474b18800 0000000000000000 ffff880474157000 ffff88046c5c0890 ffff880077208e78 ffff880273d03ae8 ffffffff813b9e62 ffff880200000010 ffff880474b18968 ffff880474b18848 ffff88046c5c0cd8 Call Trace: [<ffffffff813b9e62>] scsi_request_fn+0xf2/0x510 [<ffffffff81293167>] __blk_run_queue+0x37/0x50 [<ffffffff8129ac43>] blk_execute_rq_nowait+0xb3/0x130 [<ffffffff8129ad24>] blk_execute_rq+0x64/0xf0 [<ffffffff8108d2b0>] ? bit_waitqueue+0xd0/0xd0 [<ffffffff813bba35>] scsi_execute+0xe5/0x180 [<ffffffff813bbe4a>] scsi_execute_req_flags+0x9a/0x110 [<ffffffffa01b1304>] sd_spinup_disk+0x94/0x460 [sd_mod] [<ffffffff81160000>] ? __unmap_hugepage_range+0x200/0x2f0 [<ffffffffa01b2b9a>] sd_revalidate_disk+0xaa/0x3f0 [sd_mod] [<ffffffffa01b2fb8>] sd_probe_async+0xd8/0x200 [sd_mod] [<ffffffff8107703f>] async_run_entry_fn+0x3f/0x140 [<ffffffff8106a1c5>] process_one_work+0x175/0x410 [<ffffffff8106b373>] worker_thread+0x123/0x400 [<ffffffff8106b250>] ? manage_workers+0x160/0x160 [<ffffffff8107104e>] kthread+0xce/0xf0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815f0bac>] ret_from_fork+0x7c/0xb0 [<ffffffff81070f80>] ? kthread_freezable_should_stop+0x70/0x70 Code: 48 0f ab 11 72 db 48 81 4b 40 00 00 10 00 89 83 08 01 00 00 48 89 df 49 8b 04 24 48 89 1c d0 e8 f7 a8 ff ff 49 8b 85 28 05 00 00 <48> 89 58 08 48 89 03 49 8d 85 28 05 00 00 48 89 43 08 49 89 9d RIP [<ffffffff812971e0>] blk_queue_start_tag+0x90/0x150 RSP <ffff880273d03a58> CR2: ffff88046c6c9e80 Martin bisected and found this to be the problem patch; commit 6d113398dcf4dfcd9787a4ead738b186f7b7ff0f Author: Jan Kara <jack@suse.cz> Date: Mon Feb 24 16:39:54 2014 +0100 block: Stop abusing rq->csd.list in blk-softirq and the problem was immediately apparent. The patch states that it is safe to reuse queuelist at completion time, since it is no longer used. However, that is not true if a device is using block enabled tagging. If that is the case, then the queuelist is reused to keep track of busy tags. If a device also ended up using softirq completions, we'd reuse ->queuelist for the IPI handling while block tagging was still using it. Boom. Fix this by adding a new ipi_list list head, and share the memory used with the request hash table. The hash table is never used after the request is moved to the dispatch list, which happens long before any potential completion of the request. Add a new request bit for this, so we don't have cases that check rq->hash while it could potentially have been reused for the IPI completion. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09scsi: Make sure cmd_flags are 64-bitMartin K. Petersen2-4/+4
cmd_flags in struct request is now 64 bits wide but the scsi_execute functions truncated arguments passed to int leading to errors. Make sure the flags parameters are u64. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Jens Axboe <axboe@fb.com> CC: Jan Kara <jack@suse.cz> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()Tim Gardner1-1/+2
BugLink: http://bugs.launchpad.net/bugs/1305133 Malfunctioning or slow devices can cause a flood of dmesg SPAM. I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour of prior art in sound/usb/pcm.c. WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit + if (printk_ratelimit() && Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Eldad Zack <eldad@fogrefinery.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09futex: avoid race between requeue and wakeLinus Torvalds1-0/+5
Jan Stancek reported: "pthread_cond_broadcast/4-1.c testcase from openposix testsuite (LTP) occasionally fails, because some threads fail to wake up. Testcase creates 5 threads, which are all waiting on same condition. Main thread then calls pthread_cond_broadcast() without holding mutex, which calls: futex(uaddr1, FUTEX_CMP_REQUEUE_PRIVATE, 1, 2147483647, uaddr2, ..) This immediately wakes up single thread A, which unlocks mutex and tries to wake up another thread: futex(uaddr2, FUTEX_WAKE_PRIVATE, 1) If thread A manages to call futex_wake() before any waiters are requeued for uaddr2, no other thread is woken up" The ordering constraints for the hash bucket waiter counting are that the waiter counts have to be incremented _before_ getting the spinlock (because the spinlock acts as part of the memory barrier), but the "requeue" operation didn't honor those rules, and nobody had even thought about that case. This fairly simple patch just increments the waiter count for the target hash bucket (hb2) when requeing a futex before taking the locks. It then decrements them again after releasing the lock - the code that actually moves the futex(es) between hash buckets will do the additional required waiter count housekeeping. Reported-and-tested-by: Jan Stancek <jstancek@redhat.com> Acked-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # 3.14 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-09block: Ensure we only enable integrity metadata for reads and writesMartin K. Petersen1-0/+3
We'd occasionally attempt to generate protection information for flushes and other requests with a zero payload. Make sure we only attempt to enable integrity for reads and writes. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09block: Fix integrity verificationMartin K. Petersen1-10/+9
Commit bf36f9cfa6d3d caused a regression by effectively reverting Nic's fix from 5837c80e870b that ensures we traverse the full bio_vec list upon completion. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09block: Fix for_each_bvec()Martin K. Petersen1-3/+3
Commit 4550dd6c6b062 introduced for_each_bvec() which iterates over each bvec attached to a bio or bip. However, the macro fails to check bi_size before dereferencing which can lead to crashes while counting/mapping integrity scatterlist segments. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09ALSA: hda - Make full_reset booleanThierry Reding3-7/+7
The full_reset argument to azx_init_chip() carries boolean rather than numerical information, so update the type to reflect that. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ARM: 8018/1: Add {inc,dec}_preempt_count asm macrosCatalin Marinas3-29/+37
The patch adds asm macros for inc_preempt_count and dec_preempt_count_ti (which also gets the current thread_info) instead of open-coding them in arch/arm/vfp/*.S files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-09ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.hCatalin Marinas4-13/+18
asm/assembler.h is a better place for this macro since it is used by asm files outside arch/arm/kernel/ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-09ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang1-0/+1
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0283, SID: 0x10280667), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09sound: dmasound: use module_platform_driver_probe()Christoph Jaeger1-13/+1
Eliminate boilerplate code by using module_platform_driver_probe(). Signed-off-by: Christoph Jaeger <christophjaeger@linux.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: au1x00: use module_platform_driver()Christoph Jaeger1-12/+1
Eliminate boilerplate code by using module_platform_driver(). Signed-off-by: Christoph Jaeger <christophjaeger@linux.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: hda - Use runtime helper to check active state.Dylan Reid1-1/+1
From azx_interrupt, use the helper to check if the device is active instead of checking the state. This will do the right thing if runtime pm is disabled in addition to if the device is suspended. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09raid5: get_active_stripe avoids device_lockShaohua Li1-7/+2
For sequential workload (or request size big workload), get_active_stripe can find cached stripe. In this case, we always hold device_lock, which exposes a lot of lock contention for such workload. If stripe count isn't 0, we don't need hold the lock actually, since we just increase its count. And this is the hot code path for such workload. Unfortunately we must delete the BUG_ON. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-09raid5: make_request does less prepare waitShaohua Li1-5/+14
In NUMA machine, prepare_to_wait/finish_wait in make_request exposes a lot of contention for sequential workload (or big request size workload). For such workload, each bio includes several stripes. So we can just do prepare_to_wait/finish_wait once for the whold bio instead of every stripe. This reduces the lock contention completely for such workload. Random workload might have the similar lock contention too, but I didn't see it yet, maybe because my stroage is still not fast enough. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-09md: avoid oops on unload if some process is in poll or select.NeilBrown1-0/+16
If md-mod is unloaded while some process is in poll() or select(), then that process maintains a pointer to md_event_waiters, and when the try to unlink from that list, they will oops. The procfs infrastructure ensures that ->poll won't be called after remove_proc_entry, but doesn't provide a wait_queue_head for us to use, and the waitqueue code doesn't provide a way to remove all listeners from a waitqueue. So we need to: 1/ make sure no further references to md_event_waiters are taken (by setting md_unloading) 2/ wake up all processes currently waiting, and 3/ wait until all those processes have disconnected from our wait_queue_head. Reported-by: "majianpeng" <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-09md/raid1: r1buf_pool_alloc: free allocate pages when subsequent allocation ↵NeilBrown1-4/+13
fails. When performing a user-request check/repair (MD_RECOVERY_REQUEST is set) on a raid1, we allocate multiple bios each with their own set of pages. If the page allocations for one bio fails, we currently do *not* free the pages allocated for the previous bios, nor do we free the bio itself. This patch frees all the already-allocate pages, and makes sure that all the bios are freed as well. This bug can cause a memory leak which can ultimately OOM a machine. It was introduced in 3.10-rc1. Fixes: a07876064a0b73ab5ef1ebcf14b1cf0231c07858 Cc: Kent Overstreet <koverstreet@google.com> Cc: stable@vger.kernel.org (3.10+) Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-09powerpc/powernv Adapt opal-elog and opal-dump to new sysfs_remove_file_selfStewart Smith2-14/+4
We are currently using sysfs_schedule_callback() which is deprecated and about to be removed. Switch to the new interface instead. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09Revert "powerpc/powernv: hwmon driver for power values, fan rpm and temperature"Benjamin Herrenschmidt3-538/+0
This reverts commit 0de7f8a917b5202014430e0055c0e1db0348bd62. This driver wasn't merged via the proper maintainers (my fault ... ooops !) and has serious issues so let's take it out for now and have a new better one be merged the right way Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> ---
2014-04-09power, sched: stop updating inside arch_update_cpu_topology() when nothing ↵Michael Wang1-0/+15
to be update Since v1: Edited the comment according to Srivatsa's suggestion. During the testing, we encounter below WARN followed by Oops: WARNING: at kernel/sched/core.c:6218 ... NIP [c000000000101660] .build_sched_domains+0x11d0/0x1200 LR [c000000000101358] .build_sched_domains+0xec8/0x1200 PACATMSCRATCH [800000000000f032] Call Trace: [c00000001b103850] [c000000000101358] .build_sched_domains+0xec8/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c00000000045c000] .__bitmap_weight+0x60/0xf0 LR [c00000000010132c] .build_sched_domains+0xe9c/0x1200 PACATMSCRATCH [8000000000029032] Call Trace: [c00000001b1037a0] [c000000000288ff4] .kmem_cache_alloc_node_trace+0x184/0x3a0 [c00000001b103850] [c00000000010132c] .build_sched_domains+0xe9c/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... This was caused by that 'sd->groups == NULL' after building groups, which was caused by the empty 'sd->span'. The cpu's domain contained nothing because the cpu was assigned to a wrong node, due to the following unfortunate sequence of events: 1. The hypervisor sent a topology update to the guest OS, to notify changes to the cpu-node mapping. However, the update was actually redundant - i.e., the "new" mapping was exactly the same as the old one. 2. Due to this, the 'updated_cpus' mask turned out to be empty after exiting the 'for-loop' in arch_update_cpu_topology(). 3. So we ended up calling stop-machine() with an empty cpumask list, which made stop-machine internally elect cpumask_first(cpu_online_mask), i.e., CPU0 as the cpu to run the payload (the update_cpu_topology() function). 4. This causes update_cpu_topology() to be run by CPU0. And since 'updates' is kzalloc()'ed inside arch_update_cpu_topology(), update_cpu_topology() finds update->cpu as well as update->new_nid to be 0. In other words, we end up assigning CPU0 (and eventually its siblings) to node 0, incorrectly. Along with the following wrong updating, it causes the sched-domain rebuild code to break and crash the system. Fix this by skipping the topology update in cases where we find that the topology has not actually changed in reality (ie., spurious updates). CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Nathan Fontenot <nfont@linux.vnet.ibm.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Andrew Morton <akpm@linux-foundation.org> CC: Robert Jennings <rcj@linux.vnet.ibm.com> CC: Jesse Larrew <jlarrew@linux.vnet.ibm.com> CC: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> CC: Alistair Popple <alistair@popple.id.au> Suggested-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/le: Avoid creatng R_PPC64_TOCSAVE relocations for modules.Tony Breeds1-0/+1
When building modules with a native le toolchain the linker will generate R_PPC64_TOCSAVE relocations when it's safe to omit saving r2 on a plt call. This isn't helpful in the conext of a kernel module and the kernel will fail to load those modules with an error like: nf_conntrack: Unknown ADD relocation: 109 This patch tells the linker to avoid createing R_PPC64_TOCSAVE relocations allowing modules to load. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09arch/powerpc: Use RCU_INIT_POINTER(x, NULL) in platforms/cell/spu_syscalls.cMonam Agarwal1-1/+1
Here rcu_assign_pointer() is ensuring that the initialization of a structure is carried out before storing a pointer to that structure. So, rcu_assign_pointer(p, NULL) can always safely be converted to RCU_INIT_POINTER(p, NULL). Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/opal: Add missing includeMichael Neuling1-0/+2
next-20140324 currently fails compiling celleb_defconfig with: arch/powerpc/include/asm/opal.h:894:42: error: 'struct notifier_block' declared inside parameter list [-Werror] arch/powerpc/include/asm/opal.h:894:42: error: its scope is only this definition or declaration, which is probably not what you want [-Werror] arch/powerpc/include/asm/opal.h:896:14: error: 'struct notifier_block' declared inside parameter list [-Werror] This is due to a missing include which is added here. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc: Convert last uses of __FUNCTION__ to __func__Joe Perches1-6/+5
Just about all of these have been converted to __func__, so convert the last uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc: Add lq/stq emulationAnton Blanchard3-8/+46
Recent CPUs support quad word load and store instructions. Add support to the alignment handler for them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/powernv: Add invalid OPAL callJoel Stanley3-0/+6
This call will not be understood by OPAL, and cause it to add an error to it's log. Among other things, this is useful for testing the behaviour of the log as it fills up. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/powernv: Add OPAL message log interfaceJoel Stanley4-1/+128
OPAL provides an in-memory circular buffer containing a message log populated with various runtime messages produced by the firmware. Provide a sysfs interface /sys/firmware/opal/msglog for userspace to view the messages. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/book3s: Fix mc_recoverable_range buffer overrun issue.Mahesh Salgaonkar1-8/+20
Currently we wrongly allocate mc_recoverable_range buffer (to hold recoverable ranges) based on size of the property "mcheck-recoverable-ranges". This results in allocating less memory to hold available recoverable range entries from /proc/device-tree/ibm,opal/mcheck-recoverable-ranges. This patch fixes this issue by allocating mc_recoverable_range buffer based on number of entries of recoverable ranges instead of device property size. Without this change we end up allocating less memory and run into memory corruption issue. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc: Remove dead code in sycall entryMichael Neuling1-8/+0
In: commit 742415d6b66bf09e3e73280178ef7ec85c90b7ee Author: Michael Neuling <mikey@neuling.org> powerpc: Turn syscall handler into macros We converted the syscall entry code onto macros, but in doing this we introduced some cruft that's never run and should never have been added. This removes that code. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc: Use of_node_init() for the fakenode in msi_bitmap.cLi Zhong1-1/+1
This patch uses of_node_init() to initialize the kobject in the fake node used in test_of_node(), to avoid following kobject warning. [ 0.897654] kobject: '(null)' (c0000007ca183a08): is not initialized, yet kobject_put() is being called. [ 0.897682] ------------[ cut here ]------------ [ 0.897688] WARNING: at lib/kobject.c:670 [ 0.897692] Modules linked in: [ 0.897701] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #1 [ 0.897708] task: c0000007ca100000 ti: c0000007ca180000 task.ti: c0000007ca180000 [ 0.897715] NIP: c00000000046a1f0 LR: c00000000046a1ec CTR: 0000000001704660 [ 0.897721] REGS: c0000007ca1835c0 TRAP: 0700 Not tainted (3.14.0+) [ 0.897727] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28000024 XER: 0000000d [ 0.897749] CFAR: c0000000008ef4ec SOFTE: 1 GPR00: c00000000046a1ec c0000007ca183840 c0000000014c59b8 000000000000005c GPR04: 0000000000000001 c000000000129770 0000000000000000 0000000000000001 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000003fef GPR12: 0000000000000000 c00000000f221200 c00000000000c350 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c00000000144e808 c000000000c56f20 00000000000000d8 GPR28: c000000000cd5058 0000000000000000 c000000001454ca8 c0000007ca183a08 [ 0.897856] NIP [c00000000046a1f0] .kobject_put+0xa0/0xb0 [ 0.897863] LR [c00000000046a1ec] .kobject_put+0x9c/0xb0 [ 0.897868] Call Trace: [ 0.897874] [c0000007ca183840] [c00000000046a1ec] .kobject_put+0x9c/0xb0 (unreliable) [ 0.897885] [c0000007ca1838c0] [c000000000743f9c] .of_node_put+0x2c/0x50 [ 0.897894] [c0000007ca183940] [c000000000c83954] .test_of_node+0x1dc/0x208 [ 0.897902] [c0000007ca183b80] [c000000000c839a4] .msi_bitmap_selftest+0x24/0x38 [ 0.897913] [c0000007ca183bf0] [c00000000000bb34] .do_one_initcall+0x144/0x200 [ 0.897922] [c0000007ca183ce0] [c000000000c748e4] .kernel_init_freeable+0x2b4/0x394 [ 0.897931] [c0000007ca183db0] [c00000000000c374] .kernel_init+0x24/0x130 [ 0.897940] [c0000007ca183e30] [c00000000000a2f4] .ret_from_kernel_thread+0x5c/0x68 [ 0.897947] Instruction dump: [ 0.897952] 7fe3fb78 38210080 e8010010 ebe1fff8 7c0803a6 4800014c e89f0000 3c62ff6e [ 0.897971] 7fe5fb78 3863a950 48485279 60000000 <0fe00000> 39000000 393f0038 4bffff80 [ 0.897992] ---[ end trace 1eeffdb9f825a556 ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/mm: NUMA pte should be handled via slow path in get_user_pages_fast()Aneesh Kumar K.V1-0/+13
We need to handle numa pte via the slow path Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09powerpc/powernv: Fix endian issues with sensor codeAnton Blanchard2-3/+4
One OPAL call and one device tree property needed byte swapping. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-06 10:00:51 +0000