summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/drivers
AgeCommit message (Collapse)AuthorLines
2020-08-03selftests: mlxsw: RED: Test offload of trapping on RED qeventsPetr Machata-6/+40
Add a selftest for RED early_drop and mark qevents when a trap action is attached at the associated block. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15selftests: mlxsw: Test policers' occupancyIdo Schimmel-0/+108
Test that policers shared by different tc filters are correctly reference counted by observing policers' occupancy via devlink-resource. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15selftests: mlxsw: Add scale test for tc-policeIdo Schimmel-2/+126
Query the maximum number of supported policers using devlink-resource and test that this number can be reached by configuring tc filters with police action. Test that an error is returned in case the maximum number is exceeded. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15selftests: mlxsw: tc_restrictions: Test tc-police restrictionsIdo Schimmel-0/+76
Test that upper and lower limits on rate and burst size imposed by the device are rejected by the kernel. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-13selftests: mlxsw: RED: Test offload of mirror on RED early_drop qeventPetr Machata-3/+122
Add a selftest for offloading a mirror action attached to the block associated with RED early_drop qevent. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10selftests: net: add a test for UDP tunnel info infraJakub Kicinski-0/+786
Add validating the UDP tunnel infra works. $ ./udp_tunnel_nic.sh PASSED all 383 checks Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01selftests: mlxsw: Add test for control packetsIdo Schimmel-0/+688
Generate packets matching the various control traps and check that the traps' stats increase accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26mlxsw: spectrum: Reduce priority of locally delivered packetsIdo Schimmel-1/+1
To align with recent recommended values. Will be configurable by future patches. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller-1/+5
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22selftests: mlxsw: qos_mc_aware: Specify arping timeout as an integerAmit Cohen-1/+1
Starting from iputils s20190709 (used in Fedora 31), arping does not support timeout being specified as a decimal: $ arping -c 1 -I swp1 -b 192.0.2.66 -q -w 0.1 arping: invalid argument: '0.1' Previously, such timeouts were rounded to an integer. Fix this by specifying the timeout as an integer. Fixes: a5ee171d087e ("selftests: mlxsw: qos_mc_aware: Add a test for UC awareness") Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22selftests: netdevsim: Always initialize 'RET' variableIdo Schimmel-0/+4
The variable is used by log_test() to check if the test case completely successfully or not. In case it is not initialized at the start of a test case, it is possible for the test case to fail despite not encountering any errors. Example: ``` ... TEST: Trap group statistics [ OK ] TEST: Trap policer [FAIL] Policer drop counter was not incremented TEST: Trap policer binding [FAIL] Policer drop counter was not incremented ``` Failure of trap_policer_test() caused trap_policer_bind_test() to fail as well. Fix by adding missing initialization of the variable. Fixes: 5fbff58e27a1 ("selftests: netdevsim: Add test cases for devlink-trap policers") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16selftests: mlxsw: Do not hard code trap group nameIdo Schimmel-70/+37
It can be derived dynamically from the trap's name, so drop it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14devlink: refactor end checks in devlink_nl_cmd_region_read_dumpitJakub Kicinski-0/+15
Clean up after recent fixes, move address calculations around and change the variable init, so that we can have just one start_offset == end_offset check. Make the check a little stricter to preserve the -EINVAL error if requested start offset is larger than the region itself. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-09selftests: mlxsw: tc_restrictions: add couple of test for the correct ↵Jiri Pirko-0/+107
matchall-flower ordering Make sure that the drive restricts incorrect order of inserted matchall vs. flower rules. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09selftests: mlxsw: tc_restrictions: add test to check sample action restrictionsJiri Pirko-0/+25
Check that matchall rules with sample actions are not possible to be inserted to egress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09selftests: mlxsw: rename tc_flower_restrictions.sh to tc_restrictions.shJiri Pirko-0/+0
The file is about to contain matchall restrictions too, so change the name to make it more generic. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-04devlink: let kernel allocate region snapshot idJakub Kicinski-0/+13
Currently users have to choose a free snapshot id before calling DEVLINK_CMD_REGION_NEW. This is potentially racy and inconvenient. Make the DEVLINK_ATTR_REGION_SNAPSHOT_ID optional and try to allocate id automatically. Send a message back to the caller with the snapshot info. Example use: $ devlink region new netdevsim/netdevsim1/dummy netdevsim/netdevsim1/dummy: snapshot 1 $ id=$(devlink -j region new netdevsim/netdevsim1/dummy | \ jq '.[][][][]') $ devlink region dump netdevsim/netdevsim1/dummy snapshot $id [...] $ devlink region del netdevsim/netdevsim1/dummy snapshot $id v4: - inline the notification code v3: - send the notification only once snapshot creation completed. v2: - don't wrap the line containing extack; - add a few sentences to the docs. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-03-30selftests: mlxsw: Add test cases for devlink-trap policersIdo Schimmel-0/+384
Add test cases that verify that each registered packet trap policer: * Honors that imposed limitations of rate and burst size * Able to police trapped packets to the specified rate * Able to police trapped packets to the specified burst size * Able to be unbound from its trap group Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30selftests: netdevsim: Add test cases for devlink-trap policersIdo Schimmel-0/+116
Add test cases for packet trap policer set / show commands as well as for the binding of these policers to packet trap groups. Both good and bad flows are tested for maximum coverage. v2: * Add test case with new 'fail_trap_policer_set' knob * Add test case for partially modified trap group Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30netdevsim: Change dummy reporter auto recover defaultEran Ben Elisha-0/+5
Health reporters should be registered with auto recover set to true. Align dummy reporter behaviour with that, as in later patch the option to set auto recover behaviour will be removed. In addition, align netdevsim selftest to the new default value. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26netdevsim: support taking immediate snapshot via devlinkJacob Keller-0/+10
Implement the .snapshot region operation for the dummy data region. This enables a region snapshot to be taken upon request via the new DEVLINK_CMD_REGION_SNAPSHOT command. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26selftests: mlxsw: qos_dscp_router: Test no DSCP rewrite after peditPetr Machata-0/+30
When DSCP is updated through an offloaded pedit action, DSCP rewrite on egress should be disabled. Add a test that check that it is so. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18selftests: mlxsw: Add tc action hw_stats testsJiri Pirko-0/+130
Add tests for mlxsw hw_stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18selftests: spectrum-2: Adjust tc_flower_scale limit according to current ↵Jiri Pirko-2/+2
counter count With the change that made the code to query counter bank size from device instead of using hard-coded value, the number of available counters changed for Spectrum-2. Adjust the limit in the selftests. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14selftests: mlxsw: RED: Test RED ECN nodrop offloadPetr Machata-8/+61
Extend RED testsuite to cover the new nodrop mode of RED-ECN. This test is really similar to ECN test, diverging only in the last step, where UDP traffic should go to backlog instead of being dropped. Thus extract a common helper, ecn_test_common(), make do_ecn_test() into a relatively simple wrapper, and add another one, do_ecn_nodrop_test(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05selftests: forwarding: ETS: Use Qdisc countersPetr Machata-3/+11
Currently the SW-datapath ETS selftests use "ip link" stats to obtain the number of packets that went through a given band. mlxsw then uses ethtool per-priority counters. Instead, change both to use qdiscs. In SW datapath this is the obvious choice, and now that mlxsw offloads FIFO, this should work on the offloaded datapath as well. This has the effect of verifying that the FIFO offload works. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03selftests: mlxsw: qos_defprio: Use until_counter_isPetr Machata-14/+4
Instead of hand-coding the busywait() predicate, use the until_counter_is() introduced recently. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03selftests: forwarding: Convert until_counter_is() to take expressionPetr Machata-3/+3
until_counter_is() currently takes as an argument a number and the condition holds when the current counter value is >= that number. Make the function more generic by taking a partial expression instead of just the number. Convert the two existing users. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: resource_scale: Invoke for Spectrum-3Amit Cohen-2/+3
The scale test for Spectrum-2 should be invoked for Spectrum-2 and Spectrum-3. Add the appropriate device ID. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Reduce router scale running time using offload indicationDanielle Ratson-39/+14
Currently, the test inserts X /32 routes and for each route it is testing that a packet sent from the first host is received by the second host, which is very time-consuming. Instead only validate the offload flag of each route and get the same result. Wait between the creation of the routes and the offload validation in order to make sure that all the routes were successfully offloaded. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Reduce running time using offload indicationDanielle Ratson-19/+12
After adding a given number of flower rules for different IPv6 addresses, the test generates traffic and ensures that each packet is received, which is time-consuming. Instead, test the offload indication of the tc flower rules and reduce the running time by half. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Add shared buffer traffic testShalom Toledo-0/+222
Test the max shared buffer occupancy for port's pool and port's TC's (using different types of packets). Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Add mlxsw libShalom Toledo-0/+13
Add mlxsw lib for common defines, helpers etc. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Add shared buffer configuration testShalom Toledo-0/+416
Test physical ports' shared buffer configuration options using random values related to a specific configuration option. There are 3 configuration options: pool, TC bind and portpool. Each sub-test, test a different configuration option and random the related values as the follow: * For pools, pool's size will be randomized. * For TC bind, pool number and threshold will be randomized. * For portpools, threshold will be randomized. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Use busywait helper in rtnetlink testDanielle Ratson-24/+44
Rtnetlink test uses offload indication checks. Use a busywait helper and wait until the offload indication is set or fail if it reaches timeout. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Use busywait helper in vxlan testDanielle Ratson-89/+117
Vxlan test uses offload indication checks. Use a busywait helper and wait until the offload indication is set or fail if it reaches timeout. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Use busywait helper in blackhole routes testDanielle Ratson-2/+3
Blackhole routes test uses offload indication checks. Use busywait helper and wait until the routes offload indication is set or fail if it reaches timeout. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: devlink_trap_l3_drops: Avoid race conditionIdo Schimmel-8/+3
The test checks that packets are trapped when they should egress a router interface (RIF) that has become disabled. This is a temporary state in a RIF's deletion sequence. Currently, the test deletes the RIF by flushing all the IP addresses configured on the associated netdev (br0). However, this is racy, as this also flushes all the routes pointing to the netdev and if the routes are deleted from the device before the RIF is disabled, then no packets will try to egress the disabled RIF and the trap will not be triggered. Instead, trigger the deletion of the RIF by unlinking the mlxsw port from the bridge that is backing the RIF. Unlike before, this will not cause the kernel to delete the routes pointing to the bridge. Note that due to current mlxsw locking scheme the RIF is always deleted first, but this is going to change. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: add a mirror test to mlxsw tc flower restrictionsJiri Pirko-0/+28
Include test of forbidding to have multiple mirror actions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: add egress redirect test to mlxsw tc flower restrictionsJiri Pirko-1/+59
Include test of forbidding to have redirect rule on egress-bound block. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: mlxsw: Add a RED selftestPetr Machata-0/+647
This tests that below the queue minimum length, there is no dropping / marking, and above max, everything is dropped / marked. The test is structured as a core file with topology and test code, and three wrappers: one for RED used as a root Qdisc, and two for testing (W)RED under PRIO and ETS. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25selftests: netdevsim: Extend devlink trap test to include flow action cookieJiri Pirko-0/+5
Extend existing devlink trap test to include metadata type for flow action cookie. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24selftests: devlink_trap_acl_drops: Add ACL traps testJiri Pirko-0/+151
Add a test to check functionality of ACL traps. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24selftests: pass pref and handle to devlink_trap_drop_* helpersJiri Pirko-38/+38
Currently the helpers assume pref 1 and handle 101. Make that explicit and pass the values from callers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24selftests: introduce test for mlxsw tc flower restrictionsJiri Pirko-0/+100
Include test of forbidding to have drop rule on mixed-bound shared block. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17selftests: mlxsw: vxlan: Add test for error pathIdo Schimmel-0/+20
Test that when two VXLAN tunnels with conflicting configurations (i.e., different TTL) are enslaved to the same VLAN-aware bridge, then the enslavement of a port to the bridge is denied. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17selftests: mlxsw: vxlan: Adjust test to recent changesIdo Schimmel-3/+1
After recent changes, the VXLAN tunnel will be offloaded regardless if any local ports are member in the FID or not. Adjust the test to make sure the tunnel is offloaded in this case. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17selftests: mlxsw: extack: Test creation of multiple VLAN-aware bridgesIdo Schimmel-0/+23
The driver supports a single VLAN-aware bridge. Test that the enslavement of a port to the second VLAN-aware bridge fails with an extack. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2026-07-15 15:24:55 +0000