| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- cpu-hotplug: fix to check if cpu hotplug is supported to avoid
test failures when cpu hotplug isn't supported.
- frace: fix to relevant comparisons and path checks in the helper so
it handles those patterns without spurious shell warnings.
- runner.sh: add ktrap support
- tracing: fix to make --logdir option work again
- tracing: fix to check awk supports non POSIX strtonum()
- mqueue: fix incorrectly named settings file to make sure the test
used the correct timeout value
- kselftest:
- fix to treat xpass as successful result
- add ksft_reset_state()
- kselftest_harness:
- validate kselftest exit codes are handled explicitly
- add detection of invalid mixing of kselftest and harness
functionality
- add validation of intermixing of kselftest and harness
functionality
- run_kselftest.sh:
- remove unused $ROOT
- resolve BASE_DIR with pwd -P to avoid dependency on realpath
or readlink commands to generate a physical absolute path for
BASE_DIR
- allow choosing per-test log directory
- preserve subtarget failures in all/install
* tag 'linux_kselftest-next-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Quote check_requires comparisons
selftests: Preserve subtarget failures in all/install
selftests/run_kselftest.sh: Allow choosing per-test log directory
selftests/run_kselftest.sh: Resolve BASE_DIR with pwd -P
selftests/run_kselftest.sh: Remove unused $ROOT
selftests/cpu-hotplug: Fix check for cpu hotplug not supported
selftests/mqueue: Fix incorrectly named file
selftests: Use ktap helpers for runner.sh
selftests: harness: Validate intermixing of kselftest and harness functionality
selftests: harness: Detect illegal mixing of kselftest and harness functionality
selftests: kselftest: Add ksft_reset_state()
selftests: harness: Validate that explicit kselftest exitcodes are handled
selftests: kselftest: Treat xpass as successful result
selftests/tracing: Fix to check awk supports non POSIX strtonum()
selftests/tracing: Fix to make --logdir option work again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit tool updates from Shuah Khan:
- terminate kernel under test on SIGINT when it catches SIGINT to make
sure the TTY isn't messed up and terminate the running kernel
- recommend --raw_output=all when KTAP header isn't found in the kernel
output, it's useful to re-run the test with --raw_output=all to find
out the reasons why the test didn't complete.
- skip stty when stdin is not a tty to avoid writing noise to stderr.
- show suites when user runs --list_suites option instead of entire
list of tests to make the output user friendly and concise.
* tag 'linux_kselftest-kunit-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Terminate kernel under test on SIGINT
kunit: tool: skip stty when stdin is not a tty
kunit: tool: Recommend --raw_output=all if no KTAP found
kunit: Add --list_suites to show suites
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- Many new features and optimizations to printf()
- Rename non-standard symbols to avoid collisions with application code
- Support for byteswap.h, endian.h, err.h and asprintf()
- 64-bit dev_t
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (61 commits)
selftests/nolibc: use gcc 15
tools/nolibc: support UBSAN on gcc
tools/nolibc: create __nolibc_no_sanitize_ubsan
selftests/nolibc: don't skip tests for unimplemented syscalls anymore
selftests/nolibc: explicitly handle ENOSYS from ptrace()
tools/nolibc: add byteorder conversions
tools/nolibc: add the _syscall() macro
tools/nolibc: move the call to __sysret() into syscall()
tools/nolibc: rename the internal macros used in syscall()
selftests/nolibc: only use libgcc when really necessary
selftests/nolibc: test the memory allocator
tools/nolibc: check for overflow in calloc() without divisions
tools/nolibc: add support for asprintf()
tools/nolibc: use __builtin_offsetof()
tools/nolibc: use makedev() in fstatat()
tools/nolibc: handle all major and minor numbers in makedev() and friends
tools/nolibc: make dev_t 64 bits wide
tools/nolibc: move the logic of makedev() and friends into functions
selftests/nolibc: add a test for stat().st_rdev
selftests/nolibc: add some tests for makedev() and friends
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for huge pfnmaps
- Cleanups to use masked user access
- Rework pnv_ioda_pick_m64_pe() to use better bitmap API
- Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
- Backup region offset update to eflcorehdr
- Fixes for wii/ps3 platform
- Implement JIT support for private stack in powerpc
- Implement JIT support for fsession in powerpc64 trampoline
- Add support for instruction array and indirect jump in powerpc
- Misc selftest fixes and cleanups
Thanks to Abhishek Dubey, Aditya Gupta, Alex Williamson, Amit Machhiwal,
Andrew Donnellan, Bartosz Golaszewski, Cédric Le Goater, Chen Ni,
Christophe Leroy (CS GROUP), Hari Bathini, J. Neuschäfer, Mukesh Kumar
Chaurasiya (IBM), Nam Cao, Nilay Shroff, Pavithra Prakash, Randy Dunlap,
Ritesh Harjani (IBM), Shrikanth Hegde, Sourabh Jain, Vaibhav Jain,
Venkat Rao Bagalkote, and Yury Norov (NVIDIA)
* tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (47 commits)
mailmap: Add entry for Andrew Donnellan
powerpc32/bpf: fix loading fsession func metadata using PPC_LI32
selftest/bpf: Enable gotox tests for powerpc64
powerpc64/bpf: Add support for indirect jump
selftest/bpf: Enable instruction array test for powerpc
powerpc/bpf: Add support for instruction array
powerpc32/bpf: Add fsession support
powerpc64/bpf: Implement fsession support
selftests/bpf: Enable private stack tests for powerpc64
powerpc64/bpf: Implement JIT support for private stack
powerpc: pci-ioda: Optimize pnv_ioda_pick_m64_pe()
powerpc: pci-ioda: use bitmap_alloc() in pnv_ioda_pick_m64_pe()
powerpc/net: Inline checksum wrappers and convert to scoped user access
powerpc/sstep: Convert to scoped user access
powerpc/align: Convert emulate_spe() to scoped user access
powerpc/ptrace: Convert gpr32_set_common_user() to scoped user access
powerpc/futex: Use masked user access
powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
cpuidle: powerpc: avoid double clear when breaking snooze
powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Dave Hansen:
- Complete LASS enabling: deal with vsyscall and EFI
The existing Linear Address Space Separation (LASS) support punted
on support for common EFI and vsyscall configs. Complete the
implementation by supporting EFI and vsyscall=xonly.
- Clean up CPUID usage in newer Intel "avs" audio driver and update the
x86-cpuid-db file
* tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.0
ASoC: Intel: avs: Include CPUID header at file scope
ASoC: Intel: avs: Check maximum valid CPUID leaf
x86/cpu: Remove LASS restriction on vsyscall emulation
x86/vsyscall: Disable LASS if vsyscall mode is set to EMULATE
x86/vsyscall: Restore vsyscall=xonly mode under LASS
x86/traps: Consolidate user fixups in the #GP handler
x86/vsyscall: Reorganize the page fault emulation code
x86/cpu: Remove LASS restriction on EFI
x86/efi: Disable LASS while executing runtime services
x86/cpu: Defer LASS enabling until userspace comes up
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core updates:
- Try to allocate task_ctx_data quickly, to optimize O(N^2) algorithm
on large systems with O(100k) threads (Namhyung Kim)
AMD PMU driver IBS support updates and fixes, by Ravi Bangoria:
- Fix interrupt accounting for discarded samples
- Fix a Zen5-specific quirk
- Fix PhyAddrVal handling
- Fix NMI-safety with perf_allow_kernel()
- Fix a race between event add and NMIs
Intel PMU driver updates:
- Only check GP counters for PEBS constraints validation (Dapeng Mi)
MSR driver:
- Turn SMI_COUNT and PPERF on by default, instead of a long list of
CPU models to enable them on (Kan Liang)
... and misc cleanups and fixes by Aldf Conte, Anshuman Khandual,
Namhyung Kim, Ravi Bangoria and Yen-Hsiang Hsu"
* tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/events: Replace READ_ONCE() with standard pgtable accessors
perf/x86/msr: Make SMI and PPERF on by default
perf/x86/intel/p4: Fix unused variable warning in p4_pmu_init()
perf/x86/intel: Only check GP counters for PEBS constraints validation
perf/x86/amd/ibs: Fix comment typo in ibs_op_data
perf/amd/ibs: Advertise remote socket capability
perf/amd/ibs: Enable streaming store filter
perf/amd/ibs: Enable RIP bit63 hardware filtering
perf/amd/ibs: Enable fetch latency filtering
perf/amd/ibs: Support IBS_{FETCH|OP}_CTL2[Dis] to eliminate RMW race
perf/amd/ibs: Add new MSRs and CPUID bits definitions
perf/amd/ibs: Define macro for ldlat mask and shift
perf/amd/ibs: Avoid race between event add and NMI
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
perf/amd/ibs: Preserve PhyAddrVal bit when clearing PhyAddr MSR
perf/amd/ibs: Limit ldlat->l3missonly dependency to Zen5
perf/amd/ibs: Account interrupt for discarded samples
perf/core: Simplify __detach_global_ctx_data()
perf/core: Try to allocate task_ctx_data quickly
perf/core: Pass GFP flags to attach_task_ctx_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- KLP support updates and fixes (Song Liu)
- KLP-build script updates and fixes (Joe Lawrence)
- Support Clang RAX DRAP sequence, to address clang false positive
(Josh Poimboeuf)
- Reorder ORC register numbering to match regular x86 register
numbering (Josh Poimboeuf)
- Misc cleanups (Wentong Tian, Song Liu)
* tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: Reorder ORC register numbering
objtool: Support Clang RAX DRAP sequence
livepatch/klp-build: report patch validation fuzz
livepatch/klp-build: add terminal color output
livepatch/klp-build: provide friendlier error messages
livepatch/klp-build: improve short-circuit validation
livepatch/klp-build: fix shellcheck complaints
livepatch/klp-build: add Makefile with check target
livepatch/klp-build: add grep-override function
livepatch/klp-build: switch to GNU patch and recountdiff
livepatch/klp-build: support patches that add/remove files
objtool/klp: Correlate locals to globals
objtool/klp: Match symbols based on demangled_name for global variables
objtool/klp: Remove .llvm suffix in demangle_name()
objtool/klp: Also demangle global objects
objtool/klp: Use sym->demangled_name for symbol_name hash
objtool/klp: Remove trailing '_' in demangle_name()
objtool/klp: Remove redundant strcmp() in correlate_symbols()
objtool: Use section/symbol type helpers
|
|
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb351 ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f390 ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb516b ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6c0 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e6a ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec96 ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a sample application for WireGuard, using the generated C library.
The main benefit of this is to exercise the generated library,
which might be useful for future self-tests.
Example:
$ make -C tools/net/ynl/lib
$ make -C tools/net/ynl/generated
$ make -C tools/net/ynl/tests wireguard
$ ./tools/net/ynl/tests/wireguard
usage: ./tools/net/ynl/tests/wireguard <ifindex|ifname>
$ sudo ./tools/net/ynl/tests/wireguard wg-test
Interface 3: wg-test
Peer 6adfb183a4a2c94a2f92dab5ade762a4788[...]:
Data: rx: 42 / tx: 42 bytes
Allowed IPs:
0.0.0.0/0
::/0
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260414153944.2742252-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Make the handling of compat functions consistent and more robust
- Rework the underlying data store so that it is dynamically allocated,
which allows the conversion of the last holdout SPARC64 to the
generic VDSO implementation
- Rework the SPARC64 VDSO to utilize the generic implementation
- Mop up the left overs of the non-generic VDSO support in the core
code
- Expand the VDSO selftest and make them more robust
- Allow time namespaces to be enabled independently of the generic VDSO
support, which was not possible before due to SPARC64 not using it
- Various cleanups and improvements in the related code
* tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
timens: Use task_lock guard in timens_get*()
timens: Use mutex guard in proc_timens_set_offset()
timens: Simplify some calls to put_time_ns()
timens: Add a __free() wrapper for put_time_ns()
timens: Remove dependency on the vDSO
vdso/timens: Move functions to new file
selftests: vDSO: vdso_test_correctness: Add a test for time()
selftests: vDSO: vdso_test_correctness: Use facilities from parse_vdso.c
selftests: vDSO: vdso_test_correctness: Handle different tv_usec types
selftests: vDSO: vdso_test_correctness: Drop SYS_getcpu fallbacks
selftests: vDSO: vdso_test_gettimeofday: Remove nolibc checks
Revert "selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers"
random: vDSO: Remove ifdeffery
random: vDSO: Trim vDSO includes
vdso/datapage: Trim down unnecessary includes
vdso/datapage: Remove inclusion of gettimeofday.h
vdso/helpers: Explicitly include vdso/processor.h
vdso/gettimeofday: Add explicit includes
random: vDSO: Add explicit includes
MIPS: vdso: Explicitly include asm/vdso/vdso.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild:
- reject unexpected values for LLVM=
- uapi: remove usage of toolchain headers
- switch from '-fms-extensions' to '-fms-anonymous-structs' when
available (currently: clang >= 23.0.0)
- reduce the number of compiler-generated suffixes for clang thin-lto
build
- reduce output spam ("GEN Makefile") when building out of tree
- improve portability for testing headers
- also test UAPI headers against C++ compilers
- drop build ID architecture allow-list in vdso_install
- only run checksyscalls when necessary
- update the debug information notes in reproducible-builds.rst
- expand inlining hints with -fdiagnostics-show-inlining-chain
Kconfig:
- forbid multiple entries with the same symbol in a choice
- error out on duplicated kconfig inclusion"
* tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (35 commits)
kbuild: expand inlining hints with -fdiagnostics-show-inlining-chain
kconfig: forbid multiple entries with the same symbol in a choice
Documentation: kbuild: Update the debug information notes in reproducible-builds.rst
checksyscalls: move instance functionality into generic code
checksyscalls: only run when necessary
checksyscalls: fail on all intermediate errors
checksyscalls: move path to reference table to a variable
kbuild: vdso_install: drop build ID architecture allow-list
kbuild: vdso_install: gracefully handle images without build ID
kbuild: vdso_install: hide readelf warnings
kbuild: vdso_install: split out the readelf invocation
kbuild: uapi: also test UAPI headers against C++ compilers
kbuild: uapi: provide a C++ compatible dummy definition of NULL
kbuild: uapi: handle UML in architecture-specific exclusion lists
kbuild: uapi: move all include path flags together
kbuild: uapi: move some compiler arguments out of the command definition
check-uapi: use dummy libc includes
check-uapi: honor ${CROSS_COMPILE} setting
check-uapi: link into shared objects
kbuild: reduce output spam when building out of tree
...
|
|
Pull documentation updates from Jonathan Corbet:
"A busier cycle than I had expected for docs, including:
- Translations: some overdue updates to the Japanese translations,
Chinese translations for some of the Rust documentation, and the
beginnings of a Portuguese translation.
- New documents covering CPU isolation, managed interrupts, debugging
Python gbb scripts, and more.
- More tooling work from Mauro, reducing docs-build warnings, adding
self tests, improving man-page output, bringing in a proper C
tokenizer to replace (some of) the mess of kernel-doc regexes, and
more.
- Update and synchronize changes.rst and scripts/ver_linux, and put
both into alphabetical order.
... and a long list of documentation updates, typo fixes, and general
improvements"
* tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (162 commits)
Documentation: core-api: real-time: correct spelling
doc: Add CPU Isolation documentation
Documentation: Add managed interrupts
Documentation: seq_file: drop 2.6 reference
docs/zh_CN: update rust/index.rst translation
docs/zh_CN: update rust/quick-start.rst translation
docs/zh_CN: update rust/coding-guidelines.rst translation
docs/zh_CN: update rust/arch-support.rst translation
docs/zh_CN: sync process/2.Process.rst with English version
docs/zh_CN: fix an inconsistent statement in dev-tools/testing-overview
tracing: Documentation: Update histogram-design.rst for fn() handling
docs: sysctl: Add documentation for /proc/sys/xen/
Docs: hid: intel-ish-hid: make long URL usable
Documentation/kernel-parameters: fix architecture alignment for pt, nopt, and nobypass
sched/doc: Update yield_task description in sched-design-CFS
Documentation/rtla: Convert links to RST format
docs: fix typos and duplicated words across documentation
docs: fix typo in zoran driver documentation
docs: add an Assisted-by mention to submitting-patches.rst
Revert "scripts/checkpatch: add Assisted-by: tag validation"
...
|
|
Add further netkit queue-lease coverage for netns lifecycle of the guest
and physical halves, channel resize across active leases, single-device
and multi-lessee scenarios, L3 mode operation, lease capacity exhaustion,
and corner-cases of e.g. queue-create rejection paths. Also make the tests
more robust by removing the time.sleep(0.1) after netns deletion and turn
them into a wait loop.
Full test run:
# ./nk_qlease.py
TAP version 13
1..45
ok 1 nk_qlease.test_remove_phys
ok 2 nk_qlease.test_double_lease
ok 3 nk_qlease.test_virtual_lessor
ok 4 nk_qlease.test_phys_lessee
ok 5 nk_qlease.test_different_lessors
ok 6 nk_qlease.test_queue_out_of_range
ok 7 nk_qlease.test_resize_leased
ok 8 nk_qlease.test_self_lease
ok 9 nk_qlease.test_create_tx_type
ok 10 nk_qlease.test_create_primary
ok 11 nk_qlease.test_create_limit
ok 12 nk_qlease.test_link_flap_phys
ok 13 nk_qlease.test_queue_get_virtual
ok 14 nk_qlease.test_remove_virt_first
ok 15 nk_qlease.test_multiple_leases
ok 16 nk_qlease.test_lease_queue_tx_type
ok 17 nk_qlease.test_invalid_netns
ok 18 nk_qlease.test_invalid_phys_ifindex
ok 19 nk_qlease.test_multi_netkit_remove_phys
ok 20 nk_qlease.test_single_remove_phys
ok 21 nk_qlease.test_link_flap_virt
ok 22 nk_qlease.test_phys_queue_no_lease
ok 23 nk_qlease.test_same_ns_lease
ok 24 nk_qlease.test_resize_after_unlease
ok 25 nk_qlease.test_lease_queue_zero
ok 26 nk_qlease.test_release_and_reuse
ok 27 nk_qlease.test_veth_queue_create
ok 28 nk_qlease.test_two_netkits_same_queue
ok 29 nk_qlease.test_l3_mode_lease
ok 30 nk_qlease.test_single_double_lease
ok 31 nk_qlease.test_single_different_lessors
ok 32 nk_qlease.test_cross_ns_netns_id
ok 33 nk_qlease.test_delete_guest_netns
ok 34 nk_qlease.test_move_guest_netns
ok 35 nk_qlease.test_resize_phys_no_reduction
ok 36 nk_qlease.test_delete_one_netkit_of_two
ok 37 nk_qlease.test_bind_rx_leased_phys_queue
ok 38 nk_qlease.test_resize_phys_shrink_past_leased
ok 39 nk_qlease.test_resize_virt_not_supported
ok 40 nk_qlease.test_lease_devices_down
ok 41 nk_qlease.test_lease_capacity_exhaustion
ok 42 nk_qlease.test_resize_phys_up
ok 43 nk_qlease.test_multi_ns_lease
ok 44 nk_qlease.test_multi_ns_delete_one
ok 45 nk_qlease.test_move_phys_netns
# Totals: pass:45 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260413220809.604592-4-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As pointed out in 3d2c3d2eea9a ("selftests: net: py: explicitly forbid
multiple ksft_run() calls"), ksft_run() cannot be called multiple times.
Move the netdevsim-based queue lease tests to selftests/net/ so that
each file has exactly one ksft_run() call.
The HW tests (io_uring ZC RX, queue attrs, XDP with MP, destroy) remain
in selftests/drivers/net/hw/.
Fixes: 65d657d80684 ("selftests/net: Add queue leasing tests with netkit")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/20260409181950.7e099b6c@kernel.org
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260413220809.604592-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YnlFamily opens an AF_NETLINK socket in __init__ but has no way
to release it other than leaving it to the GC. YnlFamily holds a
self reference cycle through SpecFamily's self.family = self
in its super().__init__() call, so refcount GC cannot reclaim
it and the socket stays open until the cyclic GC runs.
If a test creates a guest netns, instantiates a YnlFamily inside
it via NetNSEnter(), performs some test case work via Ynl, and
then deletes the netns, then the 'ip netns del' only drops the
mount binding and cleanup_net in the kernel never runs, so any
subsequent test case assertions that objects got cleaned up would
fail given this only gets triggered later via cyclic GC run.
Add an explicit close() that closes the netlink socket and wire
up the __enter__/__exit__ so callers can scope the instance
deterministically via 'with YnlFamily(...) as ynl: ...'.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260413220809.604592-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test adds a variable (ts0) to two events (sched_waking and
sched_wakeup) and uses a fully-qualified variable reference to expicitly
choose a particular one (sched_wakeup.$ts0) when calculating the wakeup
latency.
Link: https://patch.msgid.link/ce9d96aeb84b2d40bd469fe9a346e225442873b1.1776112478.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a selftest that reproduces the null-ptr-deref in
bond_rr_gen_slave_id() when XDP redirect targets a bond device in
round-robin mode that was never brought up. The test verifies the fix
by ensuring no crash occurs.
Test setup:
- bond0: active-backup mode, UP, with native XDP (enables
bpf_master_redirect_enabled_key globally)
- bond1: round-robin mode, never UP
- veth1: slave of bond1, with generic XDP (XDP_TX)
- BPF_PROG_TEST_RUN with live frames triggers the redirect path
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260411005524.201200-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Building perf for LoongArch fails when CONFIG_LIBDW_DWARF_UNWIND is
enabled because unwind-libdw.o is still referenced in
arch/loongarch/util/Build.
Fixes: e62fae9d9e8 ("perf unwind-libdw: Fix a cross-arch unwinding bug")
Signed-off-by: WANG Rui <r@hev.cc>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Remove the inclusion of ../filesystems/utils.h from listns_efault_test.c.
The test doesn't use any symbols from that header. Including it alongside
../pidfd/pidfd.h causes a build failure because both headers define
wait_for_pid() with conflicting linkage:
../filesystems/utils.h: extern int wait_for_pid(pid_t pid);
../pidfd/pidfd.h: static inline int wait_for_pid(pid_t pid)
All symbols the test actually uses (create_child, read_nointr,
write_nointr, sys_pidfd_send_signal) come from pidfd.h.
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/acPV19IY3Gna6Ira@sirena.org.uk
Fixes: 07d7ad46dad4 ("selftests/namespaces: test for efault")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add missing top-level kselftest TARGETS entries for empty_mntns and
fsmount_ns so that 'make kselftest' discovers and runs these tests.
Fix requires_cap_sys_admin test which always SKIPped because fsopen()
was called after enter_userns(), where CAP_SYS_ADMIN in the mount
namespace's user_ns is unavailable. Move fsopen/fsconfig before fork so
the configured fs_fd is inherited by the child, which then only needs to
call fsmount() after dropping privileges.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
CLONE_EMPTY_MNTNS is (1ULL << 37) = 0x2000000000ULL, not 0x400000000ULL.
Fixes: 5b8ffd63fbd9 ("selftests/filesystems: add clone3 tests for empty mount namespaces")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
empty_mntns.h includes ../statmount/statmount.h which provides a
4-argument statmount_alloc(mnt_id, mnt_ns_id, mask, flags), but then
redefines its own 3-argument version without the flags parameter. This
causes a build failure due to conflicting types.
Remove the duplicate definition from empty_mntns.h and update all
callers to pass 0 for the flags argument.
Fixes: 32f54f2bbccf ("selftests/filesystems: add tests for empty mount namespaces")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove the local static wait_for_pid() definition from
statmount_test_ns.c as it conflicts with the extern declaration in
utils.h. The identical function is already provided by utils.c.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests")
Cc: <stable@kernel.org> # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently, the initialization of loongarch_jump_ops does not contain an
assignment to its .free field. This causes disasm_line__free() to fall
through to ins_ops__delete() for LoongArch jump instructions.
ins_ops__delete() will free ins_operands.source.raw and
ins_operands.source.name, and these fields overlaps with
ins_operands.jump.raw_comment and ins_operands.jump.raw_func_start.
Since in loongarch_jump__parse(), these two fields are populated by
strchr()-ing the same buffer, trying to free them will lead to undefined
behavior.
This invalid free usually leads to crashes:
Process 1712902 (perf) of user 1000 dumped core.
Stack trace of thread 1712902:
#0 0x00007fffef155c58 n/a (libc.so.6 + 0x95c58)
#1 0x00007fffef0f7a94 raise (libc.so.6 + 0x37a94)
#2 0x00007fffef0dd6a8 abort (libc.so.6 + 0x1d6a8)
#3 0x00007fffef145490 n/a (libc.so.6 + 0x85490)
#4 0x00007fffef1646f4 n/a (libc.so.6 + 0xa46f4)
#5 0x00007fffef164718 n/a (libc.so.6 + 0xa4718)
#6 0x00005555583a6764 __zfree (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x106764)
#7 0x000055555854fb70 disasm_line__free (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x2afb70)
#8 0x000055555853d618 annotated_source__purge (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x29d618)
#9 0x000055555852300c __hist_entry__tui_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28300c)
#10 0x0000555558526718 do_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x286718)
#11 0x000055555852ed94 evsel__hists_browse (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28ed94)
#12 0x000055555831fdd0 cmd_report (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x7fdd0)
#13 0x000055555839b644 handle_internal_command (/home/csmantle/dist/linux-arch/tools/perf/perf + 0xfb644)
#14 0x00005555582fe6ac main (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5e6ac)
#15 0x00007fffef0ddd90 n/a (libc.so.6 + 0x1dd90)
#16 0x00007fffef0ddf0c __libc_start_main (libc.so.6 + 0x1df0c)
#17 0x00005555582fed10 _start (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5ed10)
ELF object binary architecture: LoongArch
... and it can be confirmed with Valgrind:
==1721834== Invalid free() / delete / delete[] / realloc()
==1721834== at 0x4EA9014: free (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so)
==1721834== by 0x4106287: __zfree (zalloc.c:13)
==1721834== by 0x42ADC8F: disasm_line__free (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x429B737: annotated_source__purge (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42811EB: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== Address 0x7d34303 is 35 bytes inside a block of size 62 alloc'd
==1721834== at 0x4EA59B8: malloc (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so)
==1721834== by 0x6B80B6F: strdup (strdup.c:42)
==1721834== by 0x42AD917: disasm_line__new (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42AE5A3: symbol__disassemble_objdump (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42AF0A7: symbol__disassemble (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x429B3CF: symbol__annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x429C233: symbol__annotate2 (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42804D3: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf)
==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf)
This patch adds the missing free() specialization in loongarch_jump_ops,
which prevents disasm_line__free() from invoking the default cleanup
function.
Fixes: fb7fd2a14a503b9a ("perf annotate: Move raw_comment and raw_func_start fields out of 'struct ins_operands'")
Cc: stable@vger.kernel.org
Cc: WANG Rui <wangrui@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: loongarch@lists.linux.dev
Signed-off-by: Rong Bao <rong.bao@csmantle.top>
Tested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When filtering branch stack samples on user events they sample in user
land but may have come from the kernel. Aarch64 avoids leaking the
kernel address for kaslr reasons but other platforms, for now,
don't. Be more permissive in allowing kernel addresses in the source
of user branch stacks.
When filtering branch stack samples on kernel events they sample in
kernel land but may have come from user land. Avoid the target being a
user address but allow the source to be in user land. Aarch64 may not
leak the user land addresses (making them 0) but other platforms
do. As the kernel address sampling implies privelege, just allow this.
Increase the duration of the system call sampling test to make the
likelihood of sampling a system call higher (increased from 1000 to
8000 loops - a number found through experimentation on an Intel
Tigerlake laptop), also make the period of the event a prime number.
Put unneeded perf record output into a temporary file so that the test
output isn't cluttered. More clearly state which test is running and
the pass, fail or skipped result of the test.
These changes make the test on an Intel tigerlake laptop reliably pass
rather than reliably fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When adding a probe for libc's inet_pton, perf probe may create multiple
probe points (e.g., due to inlining or multiple symbol resolutions),
resulting in multiple identical event names being output (e.g.,
`probe_libc:inet_pton_1`).
The script previously used a brittle pipeline (`tail -n +2 | head -n -5`)
and an awk script to extract the event name. When multiple probes were
added, awk would output the event name multiple times, which expanded
to multiple words in bash. This broke the subsequent `perf record` and
`perf probe -d` commands, causing the test to fail with:
`Error: another command except --add is set.`
Fix this by removing the brittle `tail/head` commands and appending
`| head -n 1` to the awk extraction. This ensures that only a single,
unique event name is captured, regardless of how many probe points
are created.
Additionally, the test artificially limited the backtrace size via
`max-stack=4` and did not specify dwarf call graphs for non-s390x
architectures. In newer libc versions where `inet_pton` is nested
deeper or compiled without frame pointers, `perf script` failed to resolve
the backtrace up to `/bin/ping`. Fix this by explicitly collecting
dwarf call-graphs for all architectures and increasing `max-stack` to 8.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Turns out that displaying "RM $^" via quiet_cmd_rm can also upset the
shell and cause it to display "argument list too long".
Trying to quote $^ doesn't help.
In the end, *not* displaying the (potentially long) list of files is
probably the right thing to do for a "quiet" message, anyway. Instead,
let's display a count of how many files were removed. There is always
V=1 if more detail is required.
TEST linux/tools/perf/pmu-events/metric_test.log
RM ...634 orphan file(s)...
LD linux/tools/perf/util/perf-util-in.o
Also move the comment regarding xargs before the rule, so it doesn't
show up in the build output.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Validate the BTF entry count and individual data sizes when reading
HEADER_BPF_BTF from perf.data files to prevent excessive memory
allocation from malformed files.
Reuses the MAX_BPF_PROGS (131072) and MAX_BPF_DATA_LEN (256 MB)
limits from HEADER_BPF_PROG_INFO processing.
Cc: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_bpf_prog_info() to harden against malformed
perf.data files:
- Upper bound on BPF program count (max 131072)
- Upper bound on per-program data_len (max 256MB)
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound checks in PMU capabilities processing to harden against
malformed perf.data files:
- nr_pmu bounded to MAX_PMU_MAPPINGS (4096) in process_pmu_caps()
- nr_pmu_caps bounded to MAX_PMU_CAPS (512) in __process_pmu_caps()
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on nr_nodes in process_hybrid_topology() to
harden against malformed perf.data files (reuses MAX_PMU_MAPPINGS,
4096).
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on cache entry count in process_cache() to harden
against malformed perf.data files (max 32768).
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on nr_groups in process_group_desc() to harden
against malformed perf.data files (max 32768), and move the env
assignment after validation.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add upper bound check on pmu_num in process_pmu_mappings() to harden
against malformed perf.data files (max 4096).
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_mem_topology() to harden against malformed
perf.data files:
- Upper bound check on nr_nodes (reuses MAX_NUMA_NODES, 4096)
- Minimum section size check before allocating
This is particularly important here since nr is u64, making unbounded
values especially dangerous.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_numa_topology() to harden against malformed
perf.data files:
- Upper bound check on nr_nodes (max 4096)
- Minimum section size check before allocating
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add validation to process_cpu_topology() to harden against malformed
perf.data files:
- Verify nr_cpus_avail was initialized (HEADER_NRCPUS processed first)
- Bounds check sibling counts (cores, threads, dies) against nr_cpus_avail
- Fix two bare 'return -1' that leaked env->cpu by using 'goto free_cpu'
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
While working on some cleanups sashiko questioned about pre-existing
issues, namely lacking sanity checks for perf.data headers, add some
with the help of Claude.
Cc: Ian Rogers <irogers@google.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
We need to do some upper limit validation, bump up the arbitrary limit
as per suggestion of Sashiko about command line wildcard expansion
ending up with more than 32768 args.
Link: https://sashiko.dev/#/patchset/20260408172846.96360-1-acme%40kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Further validate the HEADER_CPU_DOMAIN_INFO fields, this time checking
the nr_domains field.
Assisted-by: Claude Code:claude-opus-4-6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- randomize_kstack: Improve implementation across arches (Ryan Roberts)
- lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
- refcount: Remove unused __signed_wrap function annotations
* tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
refcount: Remove unused __signed_wrap function annotations
randomize_kstack: Unify random source across arches
randomize_kstack: Maintain kstack_offset per task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp update from Kees Cook:
- selftests: Add hard-coded __NR_uprobe for x86_64 (Oleg Nesterov)
* tag 'seccomp-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Add hard-coded __NR_uprobe for x86_64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Several improvements related to crc_kunit, to align with the standard
KUnit conventions and make it easier for developers and CI systems to
run this test suite
- Add an arm64-optimized implementation of CRC64-NVME
- Remove unused code for big endian arm64
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: arm64: Simplify intrinsics implementation
lib/crc: arm64: Use existing macros for kernel-mode FPU cflags
lib/crc: arm64: Drop unnecessary chunking logic from crc64
lib/crc: arm64: Assume a little-endian kernel
lib/crc: arm64: add NEON accelerated CRC64-NVMe implementation
lib/crc: arm64: Drop check for CONFIG_KERNEL_MODE_NEON
crypto: crc32c - Remove another outdated comment
crypto: crc32c - Remove more outdated usage information
kunit: configs: Enable all CRC tests in all_tests.config
lib/crc: tests: Add a .kunitconfig file
lib/crc: tests: Add CRC_ENABLE_ALL_FOR_KUNIT
lib/crc: tests: Make crc_kunit test only the enabled CRC variants
|
