From 5547fec74a566e1f5e00a937b9a367f7c6a94a8b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 29 Jan 2014 16:17:57 +0300 Subject: UBI: fix some use after free bugs Move the kmem_cache_free() calls down a couple lines. Signed-off-by: Dan Carpenter Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/fastmap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c index ead861307b3c..c5dad652614d 100644 --- a/drivers/mtd/ubi/fastmap.c +++ b/drivers/mtd/ubi/fastmap.c @@ -463,8 +463,8 @@ static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai, } } if (found_orphan) { - kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); } new_aeb = kmem_cache_alloc(ai->aeb_slab_cache, @@ -846,16 +846,16 @@ fail_bad: ret = UBI_BAD_FASTMAP; fail: list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &used, u.list) { - kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); } list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &eba_orphans, u.list) { - kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); } list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &free, u.list) { - kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); list_del(&tmp_aeb->u.list); + kmem_cache_free(ai->aeb_slab_cache, tmp_aeb); } return ret; -- cgit v1.2.3 From 6e60163b9db6d0b203ffc0f0b8ef5a5f1c9d3fb8 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 9 Feb 2014 14:01:33 +0100 Subject: drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV' Signed-off-by: Paul Bolle Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/drm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 88a529008ce0..c71594754f46 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -104,7 +104,7 @@ static void tegra_drm_context_free(struct tegra_drm_context *context) static void tegra_drm_lastclose(struct drm_device *drm) { -#ifdef CONFIG_TEGRA_DRM_FBDEV +#ifdef CONFIG_DRM_TEGRA_FBDEV struct tegra_drm *tegra = drm->dev_private; tegra_fbdev_restore_mode(tegra->fbdev); -- cgit v1.2.3 From 89e6e8c85f21555a763d0e47841b515ede6278d1 Mon Sep 17 00:00:00 2001 From: Erik Faye-Lund Date: Tue, 7 Jan 2014 21:03:06 +0100 Subject: gpu: host1x: do not check previously handled gathers When patching gathers, we don't need to check against gathers with lower indices than the current one, as they are guaranteed to already have been handled. Signed-off-by: Erik Faye-Lund Acked-By: Terje Bergstrom Signed-off-by: Thierry Reding --- drivers/gpu/host1x/job.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/host1x/job.c b/drivers/gpu/host1x/job.c index 1146e3bba6e1..112f27e51bc7 100644 --- a/drivers/gpu/host1x/job.c +++ b/drivers/gpu/host1x/job.c @@ -538,7 +538,7 @@ int host1x_job_pin(struct host1x_job *job, struct device *dev) g->base = job->gather_addr_phys[i]; - for (j = 0; j < job->num_gathers; j++) + for (j = i + 1; j < job->num_gathers; j++) if (job->gathers[j].bo == g->bo) job->gathers[j].handled = true; -- cgit v1.2.3 From b18915379071b31ea819a36ca67761620decba06 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 11 Feb 2014 21:12:27 +0400 Subject: drm/tegra: Add guard to avoid double disable/enable of RGB outputs Add guard to check whether RGB output is already enabled in the way it's done for HDMI output. Fixes possible hang on trying to disable output twice (first time during driver probe and second on fb registering). Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/rgb.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c index 338f7f6561d7..0266fb40479e 100644 --- a/drivers/gpu/drm/tegra/rgb.c +++ b/drivers/gpu/drm/tegra/rgb.c @@ -15,6 +15,7 @@ struct tegra_rgb { struct tegra_output output; struct tegra_dc *dc; + bool enabled; struct clk *clk_parent; struct clk *clk; @@ -89,6 +90,9 @@ static int tegra_output_rgb_enable(struct tegra_output *output) struct tegra_rgb *rgb = to_rgb(output); unsigned long value; + if (rgb->enabled) + return 0; + tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable)); value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL; @@ -122,6 +126,8 @@ static int tegra_output_rgb_enable(struct tegra_output *output) tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ << 8, DC_CMD_STATE_CONTROL); tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ, DC_CMD_STATE_CONTROL); + rgb->enabled = true; + return 0; } @@ -130,6 +136,9 @@ static int tegra_output_rgb_disable(struct tegra_output *output) struct tegra_rgb *rgb = to_rgb(output); unsigned long value; + if (!rgb->enabled) + return 0; + value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_POWER_CONTROL); value &= ~(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE | PW4_ENABLE | PM0_ENABLE | PM1_ENABLE); @@ -144,6 +153,8 @@ static int tegra_output_rgb_disable(struct tegra_output *output) tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable)); + rgb->enabled = false; + return 0; } -- cgit v1.2.3 From 63ef79c25b5bbd356d04ef93d15693d8664c6141 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Wed, 5 Feb 2014 12:29:57 +0100 Subject: s390/zcrypt: additional check to avoid overflow in msg-type 6 requests Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/zcrypt_msgtype6.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c index dc542e0a3055..0bc91e46395a 100644 --- a/drivers/s390/crypto/zcrypt_msgtype6.c +++ b/drivers/s390/crypto/zcrypt_msgtype6.c @@ -311,7 +311,7 @@ static int XCRB_msg_to_type6CPRB_msgX(struct zcrypt_device *zdev, } __packed * msg = ap_msg->message; int rcblen = CEIL4(xcRB->request_control_blk_length); - int replylen; + int replylen, req_sumlen, resp_sumlen; char *req_data = ap_msg->message + sizeof(struct type6_hdr) + rcblen; char *function_code; @@ -321,12 +321,34 @@ static int XCRB_msg_to_type6CPRB_msgX(struct zcrypt_device *zdev, xcRB->request_data_length; if (ap_msg->length > MSGTYPE06_MAX_MSG_SIZE) return -EINVAL; + + /* Overflow check + sum must be greater (or equal) than the largest operand */ + req_sumlen = CEIL4(xcRB->request_control_blk_length) + + xcRB->request_data_length; + if ((CEIL4(xcRB->request_control_blk_length) <= + xcRB->request_data_length) ? + (req_sumlen < xcRB->request_data_length) : + (req_sumlen < CEIL4(xcRB->request_control_blk_length))) { + return -EINVAL; + } + replylen = sizeof(struct type86_fmt2_msg) + CEIL4(xcRB->reply_control_blk_length) + xcRB->reply_data_length; if (replylen > MSGTYPE06_MAX_MSG_SIZE) return -EINVAL; + /* Overflow check + sum must be greater (or equal) than the largest operand */ + resp_sumlen = CEIL4(xcRB->reply_control_blk_length) + + xcRB->reply_data_length; + if ((CEIL4(xcRB->reply_control_blk_length) <= xcRB->reply_data_length) ? + (resp_sumlen < xcRB->reply_data_length) : + (resp_sumlen < CEIL4(xcRB->reply_control_blk_length))) { + return -EINVAL; + } + /* prepare type6 header */ msg->hdr = static_type6_hdrX; memcpy(msg->hdr.agent_id , &(xcRB->agent_ID), sizeof(xcRB->agent_ID)); -- cgit v1.2.3 From 28fa65e643ed7cf753e89db20745e264c41f3682 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 12 Feb 2014 16:08:28 -0800 Subject: mtd: nand: fix off-by-one read retry mode counting A flash may support N read retry voltage threshold modes, numbered 0 through N-1 (where mode 0 represents the initial state). However, nand_do_read_ops() tries to use mode 0 through N. This off-by-one error shows up, for instance, when using nanddump, and we have cycled through available modes: nand: setting READ RETRY mode 0 nand: setting READ RETRY mode 1 nand: setting READ RETRY mode 2 nand: setting READ RETRY mode 3 nand: setting READ RETRY mode 4 nand: setting READ RETRY mode 5 nand: setting READ RETRY mode 6 nand: setting READ RETRY mode 7 nand: setting READ RETRY mode 8 libmtd: error!: cannot read 8192 bytes from mtd0 (eraseblock 20, offset 0) error 22 (Invalid argument) nanddump: error!: mtd_read Tested on Micron MT29F64G08CBCBBH1, with 8 retry modes. Signed-off-by: Brian Norris Acked-by: Huang Shijie --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 59eba5d2c685..9715a7ba164a 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1584,7 +1584,7 @@ read_retry: } if (mtd->ecc_stats.failed - ecc_failures) { - if (retry_mode + 1 <= chip->read_retries) { + if (retry_mode + 1 < chip->read_retries) { retry_mode++; ret = nand_setup_read_retry(mtd, retry_mode); -- cgit v1.2.3 From e9baa9d9d520fb0e24cca671e430689de2d4a4b2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 13 Feb 2014 10:39:01 +0100 Subject: dma: ste_dma40: don't dereference free:d descriptor It appears that in the DMA40 driver the DMA tasklet will very often dereference memory for a descriptor just free:d from the DMA40 slab. Nothing happens because no other part of the driver has yet had a chance to claim this memory, but it's really nasty to dereference free:d memory, so let's check the flag before the descriptor is free and store it in a bool variable. Cc: stable@vger.kernel.org Reported-by: Dan Carpenter Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 00a2de957b23..bf18c786ed40 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1641,6 +1641,7 @@ static void dma_tasklet(unsigned long data) struct d40_chan *d40c = (struct d40_chan *) data; struct d40_desc *d40d; unsigned long flags; + bool callback_active; dma_async_tx_callback callback; void *callback_param; @@ -1668,6 +1669,7 @@ static void dma_tasklet(unsigned long data) } /* Callback to client */ + callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT); callback = d40d->txd.callback; callback_param = d40d->txd.callback_param; @@ -1690,7 +1692,7 @@ static void dma_tasklet(unsigned long data) spin_unlock_irqrestore(&d40c->lock, flags); - if (callback && (d40d->txd.flags & DMA_PREP_INTERRUPT)) + if (callback_active && callback) callback(callback_param); return; -- cgit v1.2.3 From c6eda5e81c4fcc77185117255c7419eda771f67f Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 31 Jan 2014 14:11:54 -0500 Subject: dm cache: move hook_info into common portion of per_bio_data structure Commit c9d28d5d ("dm cache: promotion optimisation for writes") incorrectly placed the 'hook_info' member in the writethrough-only portion of the per_bio_data structure. Given that the overwrite optimization may be used for writeback the 'hook_info' member must be placed above the 'cache' member of the per_bio_data structure. Any members above 'cache' are available from both writeback and writethrough modes' per_bio_data structure. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org # 3.13+ --- drivers/md/dm-cache-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index ffd472e015ca..14256b7fce79 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -289,6 +289,7 @@ struct per_bio_data { bool tick:1; unsigned req_nr:2; struct dm_deferred_entry *all_io_entry; + struct dm_hook_info hook_info; /* * writethrough fields. These MUST remain at the end of this @@ -297,7 +298,6 @@ struct per_bio_data { */ struct cache *cache; dm_cblock_t cblock; - struct dm_hook_info hook_info; struct dm_bio_details bio_details; }; -- cgit v1.2.3 From 80ae49aaed32af72630251eb06161b15cde15ac8 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 31 Jan 2014 14:30:37 -0500 Subject: dm cache: do not add migration to completed list before unhooking bio When completing an overwrite bio, in overwrite_endio(), the associated migration should not be added to the 'completed_migrations' until the bio's fields are restored with dm_unhook_bio(). Otherwise, do_worker() can race to process 'completed_migrations' before dm_unhook_bio() -- so the bio's bi_end_io is incorrect. This is unlikely to cause any problems given the current code but should be fixed on the basis of correctness. Also, the cache's spinlock only needs to be held when manipulating the 'completed_migrations' list -- other changes don't need protection. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber --- drivers/md/dm-cache-target.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 14256b7fce79..db0944465127 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -1010,13 +1010,15 @@ static void overwrite_endio(struct bio *bio, int err) struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size); unsigned long flags; + dm_unhook_bio(&pb->hook_info, bio); + if (err) mg->err = true; + mg->requeue_holder = false; + spin_lock_irqsave(&cache->lock, flags); list_add_tail(&mg->list, &cache->completed_migrations); - dm_unhook_bio(&pb->hook_info, bio); - mg->requeue_holder = false; spin_unlock_irqrestore(&cache->lock, flags); wake_worker(cache); -- cgit v1.2.3 From 4d1662a30dde6e545086fe0e8fd7e474c4e0b639 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 6 Feb 2014 06:08:56 -0500 Subject: dm thin: avoid metadata commit if a pool's thin devices haven't changed Commit 905e51b ("dm thin: commit outstanding data every second") introduced a periodic commit. This commit occurs regardless of whether any thin devices have made changes. Fix the periodic commit to check if any of a pool's thin devices have changed using dm_pool_changed_this_transaction(). Reported-by: Alexander Larsson Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org --- drivers/md/dm-thin-metadata.c | 17 +++++++++++++++++ drivers/md/dm-thin-metadata.h | 2 ++ drivers/md/dm-thin.c | 3 ++- 3 files changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 7da347665552..3bb4506582a9 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1489,6 +1489,23 @@ bool dm_thin_changed_this_transaction(struct dm_thin_device *td) return r; } +bool dm_pool_changed_this_transaction(struct dm_pool_metadata *pmd) +{ + bool r = false; + struct dm_thin_device *td, *tmp; + + down_read(&pmd->root_lock); + list_for_each_entry_safe(td, tmp, &pmd->thin_devices, list) { + if (td->changed) { + r = td->changed; + break; + } + } + up_read(&pmd->root_lock); + + return r; +} + bool dm_thin_aborted_changes(struct dm_thin_device *td) { bool r; diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h index 9a368567632f..dd6088a17a65 100644 --- a/drivers/md/dm-thin-metadata.h +++ b/drivers/md/dm-thin-metadata.h @@ -161,6 +161,8 @@ int dm_thin_remove_block(struct dm_thin_device *td, dm_block_t block); */ bool dm_thin_changed_this_transaction(struct dm_thin_device *td); +bool dm_pool_changed_this_transaction(struct dm_pool_metadata *pmd); + bool dm_thin_aborted_changes(struct dm_thin_device *td); int dm_thin_get_highest_mapped_block(struct dm_thin_device *td, diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index faaf944597ab..d501e436a7d9 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1357,7 +1357,8 @@ static void process_deferred_bios(struct pool *pool) bio_list_init(&pool->deferred_flush_bios); spin_unlock_irqrestore(&pool->lock, flags); - if (bio_list_empty(&bios) && !need_commit_due_to_time(pool)) + if (bio_list_empty(&bios) && + !(dm_pool_changed_this_transaction(pool->pmd) && need_commit_due_to_time(pool))) return; if (commit(pool)) { -- cgit v1.2.3 From d73f9907294c670da14baea3fb31be27879e818e Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 12 Feb 2014 16:37:30 -0500 Subject: dm io: fix I/O to multiple destinations Commit 003b5c5719f159f4f4bf97511c4702a0638313dd ("block: Convert drivers to immutable biovecs") broke dm-mirror due to dm-io breakage. dm-io had three possible iterators (DM_IO_PAGE_LIST, DM_IO_BVEC, DM_IO_VMA) that iterate over pages where the I/O should be performed. The switch to immutable biovecs changed the DM_IO_BVEC iterator to DM_IO_BIO. Before this change the iterator stored the pointer to a bio vector in the dpages structure. The iterator incremented the pointer in the dpages structure as it advanced over the pages. After the immutable biovecs change, the DM_IO_BIO iterator stores a pointer to the bio in the dpages structure and uses bio_advance to change the bio as it advances. The problem is that the function dispatch_io stores the content of the dpages structure into the variable old_pages and restores it before issuing I/O to each of the devices. Before the change, the statement "*dp = old_pages;" restored the iterator to its starting position. After the change, struct dpages holds a pointer to the bio, thus the statement "*dp = old_pages;" doesn't restore the iterator. Consequently, in the context of dm-mirror: only the first mirror leg is written correctly, the kernel locks up when trying to write the other mirror legs because the number of sectors to write in the where->count variable doesn't match the number of sectors returned by the iterator. This patch fixes the bug by partially reverting the original patch - it changes the code so that struct dpages holds a pointer to the bio vector, so that the statement "*dp = old_pages;" restores the iterator correctly. The field "context_u" holds the offset from the beginning of the current bio vector entry, just like the "bio->bi_iter.bi_bvec_done" field. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-io.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index b2b8a10e8427..3842ac738f98 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -201,29 +201,28 @@ static void list_dp_init(struct dpages *dp, struct page_list *pl, unsigned offse /* * Functions for getting the pages from a bvec. */ -static void bio_get_page(struct dpages *dp, - struct page **p, unsigned long *len, unsigned *offset) +static void bio_get_page(struct dpages *dp, struct page **p, + unsigned long *len, unsigned *offset) { - struct bio *bio = dp->context_ptr; - struct bio_vec bvec = bio_iovec(bio); - *p = bvec.bv_page; - *len = bvec.bv_len; - *offset = bvec.bv_offset; + struct bio_vec *bvec = dp->context_ptr; + *p = bvec->bv_page; + *len = bvec->bv_len - dp->context_u; + *offset = bvec->bv_offset + dp->context_u; } static void bio_next_page(struct dpages *dp) { - struct bio *bio = dp->context_ptr; - struct bio_vec bvec = bio_iovec(bio); - - bio_advance(bio, bvec.bv_len); + struct bio_vec *bvec = dp->context_ptr; + dp->context_ptr = bvec + 1; + dp->context_u = 0; } static void bio_dp_init(struct dpages *dp, struct bio *bio) { dp->get_page = bio_get_page; dp->next_page = bio_next_page; - dp->context_ptr = bio; + dp->context_ptr = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter); + dp->context_u = bio->bi_iter.bi_bvec_done; } /* -- cgit v1.2.3 From 26c17a1c56f957560cb96d219c13d21dfb605819 Mon Sep 17 00:00:00 2001 From: Beomho Seo Date: Fri, 14 Feb 2014 10:04:00 +0000 Subject: iio: cm36651: Fix read/write integration time function. This patch is fixed [read/write] integration time function. cm36651 have integration time from 1 to 640 milliseconds. But, print more then the thousand second. when call *_integration_time attribute. Because read_integration_time function return IIO_VAL_INT. read integration time function is changed return IIO_VAL_INT_PLUS_MICRO; And then .write_raw_get_fmt callback function for parse a fixed-point number from a string. Some description is revised milliseconds unit. v2: cm36651_write_int_time function fixed as it was. Signed-off-by: Beomho Seo Signed-off-by: Jonathan Cameron --- drivers/iio/light/cm36651.c | 45 +++++++++++++++++++++++---------------------- 1 file changed, 23 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c index 0a142af83e25..a45e07492db3 100644 --- a/drivers/iio/light/cm36651.c +++ b/drivers/iio/light/cm36651.c @@ -50,10 +50,10 @@ #define CM36651_CS_CONF2_DEFAULT_BIT 0x08 /* CS_CONF3 channel integration time */ -#define CM36651_CS_IT1 0x00 /* Integration time 80000 usec */ -#define CM36651_CS_IT2 0x40 /* Integration time 160000 usec */ -#define CM36651_CS_IT3 0x80 /* Integration time 320000 usec */ -#define CM36651_CS_IT4 0xC0 /* Integration time 640000 usec */ +#define CM36651_CS_IT1 0x00 /* Integration time 80 msec */ +#define CM36651_CS_IT2 0x40 /* Integration time 160 msec */ +#define CM36651_CS_IT3 0x80 /* Integration time 320 msec */ +#define CM36651_CS_IT4 0xC0 /* Integration time 640 msec */ /* PS_CONF1 command code */ #define CM36651_PS_ENABLE 0x00 @@ -64,10 +64,10 @@ #define CM36651_PS_PERS4 0x0C /* PS_CONF1 command code: integration time */ -#define CM36651_PS_IT1 0x00 /* Integration time 320 usec */ -#define CM36651_PS_IT2 0x10 /* Integration time 420 usec */ -#define CM36651_PS_IT3 0x20 /* Integration time 520 usec */ -#define CM36651_PS_IT4 0x30 /* Integration time 640 usec */ +#define CM36651_PS_IT1 0x00 /* Integration time 0.32 msec */ +#define CM36651_PS_IT2 0x10 /* Integration time 0.42 msec */ +#define CM36651_PS_IT3 0x20 /* Integration time 0.52 msec */ +#define CM36651_PS_IT4 0x30 /* Integration time 0.64 msec */ /* PS_CONF1 command code: duty ratio */ #define CM36651_PS_DR1 0x00 /* Duty ratio 1/80 */ @@ -93,8 +93,8 @@ #define CM36651_CLOSE_PROXIMITY 0x32 #define CM36651_FAR_PROXIMITY 0x33 -#define CM36651_CS_INT_TIME_AVAIL "80000 160000 320000 640000" -#define CM36651_PS_INT_TIME_AVAIL "320 420 520 640" +#define CM36651_CS_INT_TIME_AVAIL "0.08 0.16 0.32 0.64" +#define CM36651_PS_INT_TIME_AVAIL "0.000320 0.000420 0.000520 0.000640" enum cm36651_operation_mode { CM36651_LIGHT_EN, @@ -356,30 +356,30 @@ static int cm36651_read_channel(struct cm36651_data *cm36651, } static int cm36651_read_int_time(struct cm36651_data *cm36651, - struct iio_chan_spec const *chan, int *val) + struct iio_chan_spec const *chan, int *val2) { switch (chan->type) { case IIO_LIGHT: if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT1) - *val = 80000; + *val2 = 80000; else if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT2) - *val = 160000; + *val2 = 160000; else if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT3) - *val = 320000; + *val2 = 320000; else if (cm36651->cs_int_time[chan->address] == CM36651_CS_IT4) - *val = 640000; + *val2 = 640000; else return -EINVAL; break; case IIO_PROXIMITY: if (cm36651->ps_int_time == CM36651_PS_IT1) - *val = 320; + *val2 = 320; else if (cm36651->ps_int_time == CM36651_PS_IT2) - *val = 420; + *val2 = 420; else if (cm36651->ps_int_time == CM36651_PS_IT3) - *val = 520; + *val2 = 520; else if (cm36651->ps_int_time == CM36651_PS_IT4) - *val = 640; + *val2 = 640; else return -EINVAL; break; @@ -387,7 +387,7 @@ static int cm36651_read_int_time(struct cm36651_data *cm36651, return -EINVAL; } - return IIO_VAL_INT; + return IIO_VAL_INT_PLUS_MICRO; } static int cm36651_write_int_time(struct cm36651_data *cm36651, @@ -459,7 +459,8 @@ static int cm36651_read_raw(struct iio_dev *indio_dev, ret = cm36651_read_channel(cm36651, chan, val); break; case IIO_CHAN_INFO_INT_TIME: - ret = cm36651_read_int_time(cm36651, chan, val); + *val = 0; + ret = cm36651_read_int_time(cm36651, chan, val2); break; default: ret = -EINVAL; @@ -479,7 +480,7 @@ static int cm36651_write_raw(struct iio_dev *indio_dev, int ret = -EINVAL; if (mask == IIO_CHAN_INFO_INT_TIME) { - ret = cm36651_write_int_time(cm36651, chan, val); + ret = cm36651_write_int_time(cm36651, chan, val2); if (ret < 0) dev_err(&client->dev, "Integration time write failed\n"); } -- cgit v1.2.3 From 1463a166b4eafc654874528ba5e2f66dbdfb8048 Mon Sep 17 00:00:00 2001 From: Beomho Seo Date: Fri, 14 Feb 2014 10:04:00 +0000 Subject: iio: cm32181: Change cm32181 ambient light sensor driver Integration time of cm32181 is guessed about milliseconds. But cm32181_read_als_it function return IIO_VAL_INT. So fixed to return IIO_VAL_INT_PLUS_MICRO. Next, add .write_raw_get_fmt callback function for call iio_str_to_fixpoint. v2: cm32181_write_als_id function fixed as it was. Cc: Kevin Tsai Signed-off-by: Beomho Seo Signed-off-by: Jonathan Cameron --- drivers/iio/light/cm32181.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c index f17b4e6183c6..47a6dbac2d0c 100644 --- a/drivers/iio/light/cm32181.c +++ b/drivers/iio/light/cm32181.c @@ -103,13 +103,13 @@ static int cm32181_reg_init(struct cm32181_chip *cm32181) /** * cm32181_read_als_it() - Get sensor integration time (ms) * @cm32181: pointer of struct cm32181 - * @val: pointer of int to load the als_it value. + * @val2: pointer of int to load the als_it value. * * Report the current integartion time by millisecond. * - * Return: IIO_VAL_INT for success, otherwise -EINVAL. + * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL. */ -static int cm32181_read_als_it(struct cm32181_chip *cm32181, int *val) +static int cm32181_read_als_it(struct cm32181_chip *cm32181, int *val2) { u16 als_it; int i; @@ -119,8 +119,8 @@ static int cm32181_read_als_it(struct cm32181_chip *cm32181, int *val) als_it >>= CM32181_CMD_ALS_IT_SHIFT; for (i = 0; i < ARRAY_SIZE(als_it_bits); i++) { if (als_it == als_it_bits[i]) { - *val = als_it_value[i]; - return IIO_VAL_INT; + *val2 = als_it_value[i]; + return IIO_VAL_INT_PLUS_MICRO; } } @@ -221,7 +221,7 @@ static int cm32181_read_raw(struct iio_dev *indio_dev, *val = cm32181->calibscale; return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: - ret = cm32181_read_als_it(cm32181, val); + ret = cm32181_read_als_it(cm32181, val2); return ret; } @@ -240,7 +240,7 @@ static int cm32181_write_raw(struct iio_dev *indio_dev, cm32181->calibscale = val; return val; case IIO_CHAN_INFO_INT_TIME: - ret = cm32181_write_als_it(cm32181, val); + ret = cm32181_write_als_it(cm32181, val2); return ret; } @@ -264,7 +264,7 @@ static ssize_t cm32181_get_it_available(struct device *dev, n = ARRAY_SIZE(als_it_value); for (i = 0, len = 0; i < n; i++) - len += sprintf(buf + len, "%d ", als_it_value[i]); + len += sprintf(buf + len, "0.%06u ", als_it_value[i]); return len + sprintf(buf + len, "\n"); } -- cgit v1.2.3 From a0657716416f834ef7710a9044614d50a36c3bdc Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Fri, 14 Feb 2014 14:15:00 +0000 Subject: iio:gyro: bug on L3GD20H gyroscope support The driver was not able to manage the sensor: during probe function and wai check, the driver stops and writes: "device name and WhoAmI mismatch." The correct value of L3GD20H wai is 0xd7 instead of 0xd4. Dropped support for the sensor. Signed-off-by: Denis Ciocca Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/Kconfig | 2 +- drivers/iio/gyro/st_gyro.h | 1 - drivers/iio/gyro/st_gyro_core.c | 9 ++++----- drivers/iio/gyro/st_gyro_i2c.c | 1 - drivers/iio/gyro/st_gyro_spi.c | 1 - 5 files changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 41c64a43bcab..ac2d69e34c8c 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -70,7 +70,7 @@ config IIO_ST_GYRO_3AXIS select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics gyroscopes: - L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330. + L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330. This driver can also be built as a module. If so, these modules will be created: diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h index f8f2bf84a5a2..c197360c450b 100644 --- a/drivers/iio/gyro/st_gyro.h +++ b/drivers/iio/gyro/st_gyro.h @@ -19,7 +19,6 @@ #define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro" #define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro" #define L3GD20_GYRO_DEV_NAME "l3gd20" -#define L3GD20H_GYRO_DEV_NAME "l3gd20h" #define L3G4IS_GYRO_DEV_NAME "l3g4is_ui" #define LSM330_GYRO_DEV_NAME "lsm330_gyro" diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index d53d91adfb55..a8e174a47bc4 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -167,11 +167,10 @@ static const struct st_sensors st_gyro_sensors[] = { .wai = ST_GYRO_2_WAI_EXP, .sensors_supported = { [0] = L3GD20_GYRO_DEV_NAME, - [1] = L3GD20H_GYRO_DEV_NAME, - [2] = LSM330D_GYRO_DEV_NAME, - [3] = LSM330DLC_GYRO_DEV_NAME, - [4] = L3G4IS_GYRO_DEV_NAME, - [5] = LSM330_GYRO_DEV_NAME, + [1] = LSM330D_GYRO_DEV_NAME, + [2] = LSM330DLC_GYRO_DEV_NAME, + [3] = L3G4IS_GYRO_DEV_NAME, + [4] = LSM330_GYRO_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, .odr = { diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c index 16b8b8d70bf1..23c12f361b05 100644 --- a/drivers/iio/gyro/st_gyro_i2c.c +++ b/drivers/iio/gyro/st_gyro_i2c.c @@ -55,7 +55,6 @@ static const struct i2c_device_id st_gyro_id_table[] = { { LSM330DL_GYRO_DEV_NAME }, { LSM330DLC_GYRO_DEV_NAME }, { L3GD20_GYRO_DEV_NAME }, - { L3GD20H_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME }, {}, diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c index 94763e25caf9..b4ad3be26687 100644 --- a/drivers/iio/gyro/st_gyro_spi.c +++ b/drivers/iio/gyro/st_gyro_spi.c @@ -54,7 +54,6 @@ static const struct spi_device_id st_gyro_id_table[] = { { LSM330DL_GYRO_DEV_NAME }, { LSM330DLC_GYRO_DEV_NAME }, { L3GD20_GYRO_DEV_NAME }, - { L3GD20H_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME }, {}, -- cgit v1.2.3 From 63edea16b7fea3e422e63e218c9e7349b2d0a63b Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sun, 16 Feb 2014 20:10:55 +0100 Subject: dma: sdma: Add imx25 compatible imx25 did not work without a firmware previously. This patch adds a DT compatible to pass the correct data with the default script addresses for imx25. Add imx25 compatible to the list of compatibles in the binding documentation. Signed-off-by: Markus Pargmann Acked-by: Shawn Guo Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 16 ++++++++++------ drivers/dma/imx-sdma.c | 1 + 2 files changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 68b83ecc3850..ee9be9961524 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -1,12 +1,16 @@ * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX Required properties: -- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma", - "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma", - "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or - "fsl,imx6q-sdma". The -to variants should be preferred since they - allow to determnine the correct ROM script addresses needed for - the driver to work without additional firmware. +- compatible : Should be one of + "fsl,imx25-sdma" + "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma" + "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma" + "fsl,imx51-sdma" + "fsl,imx53-sdma" + "fsl,imx6q-sdma" + The -to variants should be preferred since they allow to determnine the + correct ROM script addresses needed for the driver to work without additional + firmware. - reg : Should contain SDMA registers location and length - interrupts : Should contain SDMA interrupt - #dma-cells : Must be <3>. diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 4e7918339b12..19041cefabb1 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -449,6 +449,7 @@ static const struct of_device_id sdma_dt_ids[] = { { .compatible = "fsl,imx51-sdma", .data = &sdma_imx51, }, { .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, }, { .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, }, + { .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sdma_dt_ids); -- cgit v1.2.3 From f3a44fe0608eb628e1f8f6e3540462e6d171a745 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 18 Feb 2014 09:57:22 -0500 Subject: dm raid1: fix immutable biovec related BUG when retrying read bio When restoring bi_end_io, increase bi_remaining before retrying the bio to avoid BUG_ON(atomic_read(&bio->bi_remaining) <= 0) in bio_endio(). Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-raid1.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index f284e0bfb25f..7dfdb5c746d6 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1244,6 +1244,9 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, int error) dm_bio_restore(bd, bio); bio_record->details.bi_bdev = NULL; + + atomic_inc(&bio->bi_remaining); + queue_bio(ms, bio, rw); return DM_ENDIO_INCOMPLETE; } -- cgit v1.2.3 From c4204960e9d0ba99459dbf1db918f99a45e7a62a Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 18 Feb 2014 15:22:12 +0000 Subject: Input - arizona-haptics: Fix double lock of dapm_mutex snd_soc_dapm_sync takes the dapm_mutex internally, but we currently take it externally as well. This patch fixes this. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/input/misc/arizona-haptics.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c index 7a04f54ef961..e7e12a5f5c2d 100644 --- a/drivers/input/misc/arizona-haptics.c +++ b/drivers/input/misc/arizona-haptics.c @@ -77,16 +77,14 @@ static void arizona_haptics_work(struct work_struct *work) return; } + mutex_unlock(dapm_mutex); + ret = snd_soc_dapm_sync(arizona->dapm); if (ret != 0) { dev_err(arizona->dev, "Failed to sync DAPM: %d\n", ret); - mutex_unlock(dapm_mutex); return; } - - mutex_unlock(dapm_mutex); - } else { /* This disable sequence will be a noop if already enabled */ mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); @@ -99,16 +97,15 @@ static void arizona_haptics_work(struct work_struct *work) return; } + mutex_unlock(dapm_mutex); + ret = snd_soc_dapm_sync(arizona->dapm); if (ret != 0) { dev_err(arizona->dev, "Failed to sync DAPM: %d\n", ret); - mutex_unlock(dapm_mutex); return; } - mutex_unlock(dapm_mutex); - ret = regmap_update_bits(arizona->regmap, ARIZONA_HAPTICS_CONTROL_1, ARIZONA_HAP_CTRL_MASK, -- cgit v1.2.3 From 113911006442a36c2b4669faf1699d9042ef80ab Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 18 Feb 2014 15:22:14 +0000 Subject: ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions The snd_soc_dapm_xxxx_pin all require the dapm_mutex to be held when they are called as they edit the dirty list, however very few of the callers do so. This patch adds unlocked versions of all the functions replacing the existing implementations with one that holds the lock internally. We also fix up the places where the lock was actually held on the caller side. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/extcon/extcon-arizona.c | 12 ---- drivers/input/misc/arizona-haptics.c | 16 ----- include/sound/soc-dapm.h | 8 +++ sound/soc/soc-dapm.c | 133 ++++++++++++++++++++++++++++++++--- 4 files changed, 131 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index c20602f601ee..98a14f6143a7 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -222,27 +222,19 @@ static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) struct snd_soc_dapm_context *dapm = arizona->dapm; int ret; - mutex_lock(&dapm->card->dapm_mutex); - ret = snd_soc_dapm_force_enable_pin(dapm, widget); if (ret != 0) dev_warn(arizona->dev, "Failed to enable %s: %d\n", widget, ret); - mutex_unlock(&dapm->card->dapm_mutex); - snd_soc_dapm_sync(dapm); if (!arizona->pdata.micd_force_micbias) { - mutex_lock(&dapm->card->dapm_mutex); - ret = snd_soc_dapm_disable_pin(arizona->dapm, widget); if (ret != 0) dev_warn(arizona->dev, "Failed to disable %s: %d\n", widget, ret); - mutex_unlock(&dapm->card->dapm_mutex); - snd_soc_dapm_sync(dapm); } } @@ -304,16 +296,12 @@ static void arizona_stop_mic(struct arizona_extcon_info *info) ARIZONA_MICD_ENA, 0, &change); - mutex_lock(&dapm->card->dapm_mutex); - ret = snd_soc_dapm_disable_pin(dapm, widget); if (ret != 0) dev_warn(arizona->dev, "Failed to disable %s: %d\n", widget, ret); - mutex_unlock(&dapm->card->dapm_mutex); - snd_soc_dapm_sync(dapm); if (info->micd_reva) { diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c index e7e12a5f5c2d..ef2e281b0a43 100644 --- a/drivers/input/misc/arizona-haptics.c +++ b/drivers/input/misc/arizona-haptics.c @@ -37,7 +37,6 @@ static void arizona_haptics_work(struct work_struct *work) struct arizona_haptics, work); struct arizona *arizona = haptics->arizona; - struct mutex *dapm_mutex = &arizona->dapm->card->dapm_mutex; int ret; if (!haptics->arizona->dapm) { @@ -67,18 +66,13 @@ static void arizona_haptics_work(struct work_struct *work) return; } - mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); - ret = snd_soc_dapm_enable_pin(arizona->dapm, "HAPTICS"); if (ret != 0) { dev_err(arizona->dev, "Failed to start HAPTICS: %d\n", ret); - mutex_unlock(dapm_mutex); return; } - mutex_unlock(dapm_mutex); - ret = snd_soc_dapm_sync(arizona->dapm); if (ret != 0) { dev_err(arizona->dev, "Failed to sync DAPM: %d\n", @@ -87,18 +81,13 @@ static void arizona_haptics_work(struct work_struct *work) } } else { /* This disable sequence will be a noop if already enabled */ - mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); - ret = snd_soc_dapm_disable_pin(arizona->dapm, "HAPTICS"); if (ret != 0) { dev_err(arizona->dev, "Failed to disable HAPTICS: %d\n", ret); - mutex_unlock(dapm_mutex); return; } - mutex_unlock(dapm_mutex); - ret = snd_soc_dapm_sync(arizona->dapm); if (ret != 0) { dev_err(arizona->dev, "Failed to sync DAPM: %d\n", @@ -152,16 +141,11 @@ static int arizona_haptics_play(struct input_dev *input, void *data, static void arizona_haptics_close(struct input_dev *input) { struct arizona_haptics *haptics = input_get_drvdata(input); - struct mutex *dapm_mutex = &haptics->arizona->dapm->card->dapm_mutex; cancel_work_sync(&haptics->work); - mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); - if (haptics->arizona->dapm) snd_soc_dapm_disable_pin(haptics->arizona->dapm, "HAPTICS"); - - mutex_unlock(dapm_mutex); } static int arizona_haptics_probe(struct platform_device *pdev) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 68d92e36facd..6e89ef6c11c1 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -449,14 +449,22 @@ void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm, /* dapm audio pin control and status */ int snd_soc_dapm_enable_pin(struct snd_soc_dapm_context *dapm, const char *pin); +int snd_soc_dapm_enable_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin); int snd_soc_dapm_disable_pin(struct snd_soc_dapm_context *dapm, const char *pin); +int snd_soc_dapm_disable_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin); int snd_soc_dapm_nc_pin(struct snd_soc_dapm_context *dapm, const char *pin); +int snd_soc_dapm_nc_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin); int snd_soc_dapm_get_pin_status(struct snd_soc_dapm_context *dapm, const char *pin); int snd_soc_dapm_sync(struct snd_soc_dapm_context *dapm); int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm, const char *pin); +int snd_soc_dapm_force_enable_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin); int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm, const char *pin); void snd_soc_dapm_auto_nc_codec_pins(struct snd_soc_codec *codec); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index fd39cd2827d7..b9dc6acbba8c 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3210,15 +3210,11 @@ int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol, struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); const char *pin = (const char *)kcontrol->private_value; - mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); - if (ucontrol->value.integer.value[0]) snd_soc_dapm_enable_pin(&card->dapm, pin); else snd_soc_dapm_disable_pin(&card->dapm, pin); - mutex_unlock(&card->dapm_mutex); - snd_soc_dapm_sync(&card->dapm); return 0; } @@ -3766,6 +3762,26 @@ void snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream, mutex_unlock(&card->dapm_mutex); } +/** + * snd_soc_dapm_enable_pin_unlocked - enable pin. + * @dapm: DAPM context + * @pin: pin name + * + * Enables input/output pin and its parents or children widgets iff there is + * a valid audio route and active audio stream. + * + * Requires external locking. + * + * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to + * do any widget power switching. + */ +int snd_soc_dapm_enable_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin) +{ + return snd_soc_dapm_set_pin(dapm, pin, 1); +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin_unlocked); + /** * snd_soc_dapm_enable_pin - enable pin. * @dapm: DAPM context @@ -3773,17 +3789,26 @@ void snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream, * * Enables input/output pin and its parents or children widgets iff there is * a valid audio route and active audio stream. + * * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. */ int snd_soc_dapm_enable_pin(struct snd_soc_dapm_context *dapm, const char *pin) { - return snd_soc_dapm_set_pin(dapm, pin, 1); + int ret; + + mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + + ret = snd_soc_dapm_set_pin(dapm, pin, 1); + + mutex_unlock(&dapm->card->dapm_mutex); + + return ret; } EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin); /** - * snd_soc_dapm_force_enable_pin - force a pin to be enabled + * snd_soc_dapm_force_enable_pin_unlocked - force a pin to be enabled * @dapm: DAPM context * @pin: pin name * @@ -3791,11 +3816,13 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin); * intended for use with microphone bias supplies used in microphone * jack detection. * + * Requires external locking. + * * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. */ -int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm, - const char *pin) +int snd_soc_dapm_force_enable_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin) { struct snd_soc_dapm_widget *w = dapm_find_widget(dapm, pin, true); @@ -3811,24 +3838,102 @@ int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm, return 0; } +EXPORT_SYMBOL_GPL(snd_soc_dapm_force_enable_pin_unlocked); + +/** + * snd_soc_dapm_force_enable_pin - force a pin to be enabled + * @dapm: DAPM context + * @pin: pin name + * + * Enables input/output pin regardless of any other state. This is + * intended for use with microphone bias supplies used in microphone + * jack detection. + * + * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to + * do any widget power switching. + */ +int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm, + const char *pin) +{ + int ret; + + mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + + ret = snd_soc_dapm_force_enable_pin_unlocked(dapm, pin); + + mutex_unlock(&dapm->card->dapm_mutex); + + return ret; +} EXPORT_SYMBOL_GPL(snd_soc_dapm_force_enable_pin); +/** + * snd_soc_dapm_disable_pin_unlocked - disable pin. + * @dapm: DAPM context + * @pin: pin name + * + * Disables input/output pin and its parents or children widgets. + * + * Requires external locking. + * + * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to + * do any widget power switching. + */ +int snd_soc_dapm_disable_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin) +{ + return snd_soc_dapm_set_pin(dapm, pin, 0); +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_disable_pin_unlocked); + /** * snd_soc_dapm_disable_pin - disable pin. * @dapm: DAPM context * @pin: pin name * * Disables input/output pin and its parents or children widgets. + * * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. */ int snd_soc_dapm_disable_pin(struct snd_soc_dapm_context *dapm, const char *pin) { - return snd_soc_dapm_set_pin(dapm, pin, 0); + int ret; + + mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + + ret = snd_soc_dapm_set_pin(dapm, pin, 0); + + mutex_unlock(&dapm->card->dapm_mutex); + + return ret; } EXPORT_SYMBOL_GPL(snd_soc_dapm_disable_pin); +/** + * snd_soc_dapm_nc_pin_unlocked - permanently disable pin. + * @dapm: DAPM context + * @pin: pin name + * + * Marks the specified pin as being not connected, disabling it along + * any parent or child widgets. At present this is identical to + * snd_soc_dapm_disable_pin() but in future it will be extended to do + * additional things such as disabling controls which only affect + * paths through the pin. + * + * Requires external locking. + * + * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to + * do any widget power switching. + */ +int snd_soc_dapm_nc_pin_unlocked(struct snd_soc_dapm_context *dapm, + const char *pin) +{ + return snd_soc_dapm_set_pin(dapm, pin, 0); +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_nc_pin_unlocked); + /** * snd_soc_dapm_nc_pin - permanently disable pin. * @dapm: DAPM context @@ -3845,7 +3950,15 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_disable_pin); */ int snd_soc_dapm_nc_pin(struct snd_soc_dapm_context *dapm, const char *pin) { - return snd_soc_dapm_set_pin(dapm, pin, 0); + int ret; + + mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + + ret = snd_soc_dapm_set_pin(dapm, pin, 0); + + mutex_unlock(&dapm->card->dapm_mutex); + + return ret; } EXPORT_SYMBOL_GPL(snd_soc_dapm_nc_pin); -- cgit v1.2.3 From ddb95145a38eb37b236d4e00f43a75d067922dda Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 19 Feb 2014 17:51:25 -0800 Subject: qla2xxx: Fix qlt_lport_register base_vha callback race This patch closes a race between qlt_lport_register() and tcm_qla2xxx callback logic by holding qla_tgt_mutex before making the callback. In order for this to work, the qlt_add_target() and qlt_remove_target() code has been changed to avoid the accessing qla_tgt_mutex + list_[add,del] for NPIV enabled ports. This bug introduced in v3.14-rc1 code with commit 49a47f2. Cc: Sawan Chandak Cc: Quinn Tran Cc: Saurav Kashyap Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_target.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 2eb97d7e8d12..ea3eaef3f81b 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -4181,6 +4181,9 @@ int qlt_add_target(struct qla_hw_data *ha, struct scsi_qla_host *base_vha) tgt->datasegs_per_cmd = QLA_TGT_DATASEGS_PER_CMD_24XX; tgt->datasegs_per_cont = QLA_TGT_DATASEGS_PER_CONT_24XX; + if (base_vha->fc_vport) + return 0; + mutex_lock(&qla_tgt_mutex); list_add_tail(&tgt->tgt_list_entry, &qla_tgt_glist); mutex_unlock(&qla_tgt_mutex); @@ -4194,6 +4197,10 @@ int qlt_remove_target(struct qla_hw_data *ha, struct scsi_qla_host *vha) if (!vha->vha_tgt.qla_tgt) return 0; + if (vha->fc_vport) { + qlt_release(vha->vha_tgt.qla_tgt); + return 0; + } mutex_lock(&qla_tgt_mutex); list_del(&vha->vha_tgt.qla_tgt->tgt_list_entry); mutex_unlock(&qla_tgt_mutex); @@ -4265,6 +4272,12 @@ int qlt_lport_register(void *target_lport_ptr, u64 phys_wwpn, spin_unlock_irqrestore(&ha->hardware_lock, flags); continue; } + if (tgt->tgt_stop) { + pr_debug("MODE_TARGET in shutdown on qla2xxx(%d)\n", + host->host_no); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + continue; + } spin_unlock_irqrestore(&ha->hardware_lock, flags); if (!scsi_host_get(host)) { @@ -4279,12 +4292,11 @@ int qlt_lport_register(void *target_lport_ptr, u64 phys_wwpn, scsi_host_put(host); continue; } - mutex_unlock(&qla_tgt_mutex); - rc = (*callback)(vha, target_lport_ptr, npiv_wwpn, npiv_wwnn); if (rc != 0) scsi_host_put(host); + mutex_unlock(&qla_tgt_mutex); return rc; } mutex_unlock(&qla_tgt_mutex); -- cgit v1.2.3 From 3c231bdae1e7c8d366eeb133980b81dff2e1e809 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 19 Feb 2014 17:50:22 -0800 Subject: qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown This patch adds an check to qlt_stop_phase1() to avoid shutdown when the base_vha contains a non-zero fc_host->npiv_vports_inuse count. This includes holding qla_tgt_mutex in qlt_stop_phase1() between the fc_host->npiv_vports_inuse check + setting of tgt->tgt_stop to avoid a possible race between qlt_lport_register() -> tcm_qla2xxx -> tcm_qla2xxx_lport_register_npiv_cb() calling fc_vport_create(). Cc: Sawan Chandak Cc: Quinn Tran Cc: Saurav Kashyap Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_target.c | 23 ++++++++++++++++++++--- drivers/scsi/qla2xxx/qla_target.h | 2 +- 2 files changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index ea3eaef3f81b..f2e1c5a5fdbb 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -790,17 +790,32 @@ static inline int test_tgt_sess_count(struct qla_tgt *tgt) } /* Called by tcm_qla2xxx configfs code */ -void qlt_stop_phase1(struct qla_tgt *tgt) +int qlt_stop_phase1(struct qla_tgt *tgt) { struct scsi_qla_host *vha = tgt->vha; struct qla_hw_data *ha = tgt->ha; unsigned long flags; + mutex_lock(&qla_tgt_mutex); + if (!vha->fc_vport) { + struct Scsi_Host *sh = vha->host; + struct fc_host_attrs *fc_host = shost_to_fc_host(sh); + bool npiv_vports; + + spin_lock_irqsave(sh->host_lock, flags); + npiv_vports = (fc_host->npiv_vports_inuse); + spin_unlock_irqrestore(sh->host_lock, flags); + + if (npiv_vports) { + mutex_unlock(&qla_tgt_mutex); + return -EPERM; + } + } if (tgt->tgt_stop || tgt->tgt_stopped) { ql_dbg(ql_dbg_tgt_mgt, vha, 0xf04e, "Already in tgt->tgt_stop or tgt_stopped state\n"); - dump_stack(); - return; + mutex_unlock(&qla_tgt_mutex); + return -EPERM; } ql_dbg(ql_dbg_tgt, vha, 0xe003, "Stopping target for host %ld(%p)\n", @@ -815,6 +830,7 @@ void qlt_stop_phase1(struct qla_tgt *tgt) qlt_clear_tgt_db(tgt, true); spin_unlock_irqrestore(&ha->hardware_lock, flags); mutex_unlock(&vha->vha_tgt.tgt_mutex); + mutex_unlock(&qla_tgt_mutex); flush_delayed_work(&tgt->sess_del_work); @@ -841,6 +857,7 @@ void qlt_stop_phase1(struct qla_tgt *tgt) /* Wait for sessions to clear out (just in case) */ wait_event(tgt->waitQ, test_tgt_sess_count(tgt)); + return 0; } EXPORT_SYMBOL(qlt_stop_phase1); diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 66e755cdde57..ce33d8c26406 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -1001,7 +1001,7 @@ extern void qlt_modify_vp_config(struct scsi_qla_host *, extern void qlt_probe_one_stage1(struct scsi_qla_host *, struct qla_hw_data *); extern int qlt_mem_alloc(struct qla_hw_data *); extern void qlt_mem_free(struct qla_hw_data *); -extern void qlt_stop_phase1(struct qla_tgt *); +extern int qlt_stop_phase1(struct qla_tgt *); extern void qlt_stop_phase2(struct qla_tgt *); extern irqreturn_t qla83xx_msix_atio_q(int, void *); extern void qlt_83xx_iospace_config(struct qla_hw_data *); -- cgit v1.2.3 From 394d62ba4580a74afc90bf0e007e10291bf447cc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 19 Feb 2014 16:52:15 -0800 Subject: tcm_qla2xxx: Add NPIV specific enable/disable attribute logic This patch adds seperate logic for NPIV specific enable/disable attribute logic, as NPIV vs. non-NPIV enable/disable ends up being different enough to warrent seperate logic for setting configfs tpg_group dependencies in the non-NPIV case. Cc: Sawan Chandak Cc: Quinn Tran Cc: Saurav Kashyap Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 59 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 56 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 75a141bbe74d..db43b2893525 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1053,11 +1053,64 @@ static void tcm_qla2xxx_drop_tpg(struct se_portal_group *se_tpg) /* * Clear local TPG=1 pointer for non NPIV mode. */ - lport->tpg_1 = NULL; - + lport->tpg_1 = NULL; kfree(tpg); } +static ssize_t tcm_qla2xxx_npiv_tpg_show_enable( + struct se_portal_group *se_tpg, + char *page) +{ + return tcm_qla2xxx_tpg_show_enable(se_tpg, page); +} + +static ssize_t tcm_qla2xxx_npiv_tpg_store_enable( + struct se_portal_group *se_tpg, + const char *page, + size_t count) +{ + struct se_wwn *se_wwn = se_tpg->se_tpg_wwn; + struct tcm_qla2xxx_lport *lport = container_of(se_wwn, + struct tcm_qla2xxx_lport, lport_wwn); + struct scsi_qla_host *vha = lport->qla_vha; + struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg, + struct tcm_qla2xxx_tpg, se_tpg); + unsigned long op; + int rc; + + rc = kstrtoul(page, 0, &op); + if (rc < 0) { + pr_err("kstrtoul() returned %d\n", rc); + return -EINVAL; + } + if ((op != 1) && (op != 0)) { + pr_err("Illegal value for tpg_enable: %lu\n", op); + return -EINVAL; + } + if (op) { + if (atomic_read(&tpg->lport_tpg_enabled)) + return -EEXIST; + + atomic_set(&tpg->lport_tpg_enabled, 1); + qlt_enable_vha(vha); + } else { + if (!atomic_read(&tpg->lport_tpg_enabled)) + return count; + + atomic_set(&tpg->lport_tpg_enabled, 0); + qlt_stop_phase1(vha->vha_tgt.qla_tgt); + } + + return count; +} + +TF_TPG_BASE_ATTR(tcm_qla2xxx_npiv, enable, S_IRUGO | S_IWUSR); + +static struct configfs_attribute *tcm_qla2xxx_npiv_tpg_attrs[] = { + &tcm_qla2xxx_npiv_tpg_enable.attr, + NULL, +}; + static struct se_portal_group *tcm_qla2xxx_npiv_make_tpg( struct se_wwn *wwn, struct config_group *group, @@ -1935,7 +1988,7 @@ static int tcm_qla2xxx_register_configfs(void) */ npiv_fabric->tf_cit_tmpl.tfc_wwn_cit.ct_attrs = tcm_qla2xxx_wwn_attrs; npiv_fabric->tf_cit_tmpl.tfc_tpg_base_cit.ct_attrs = - tcm_qla2xxx_tpg_attrs; + tcm_qla2xxx_npiv_tpg_attrs; npiv_fabric->tf_cit_tmpl.tfc_tpg_attrib_cit.ct_attrs = NULL; npiv_fabric->tf_cit_tmpl.tfc_tpg_param_cit.ct_attrs = NULL; npiv_fabric->tf_cit_tmpl.tfc_tpg_np_base_cit.ct_attrs = NULL; -- cgit v1.2.3 From 7474f52a82d51da2e6110e91bba8b000cb9cf803 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 19 Feb 2014 16:53:07 -0800 Subject: tcm_qla2xxx: Perform configfs depend/undepend for base_tpg This patch performs configfs_depend_item() during TPG enable for base_tpg (eg: non-NPIV) ports, and configfs_undepend_item() during TPG disable for base_tpg. This is done to ensure that any attempt to configfs rmdir a base_tpg with active NPIV ports will fail with -EBUSY, until all associated NPIV ports have been explicitly shutdown and base_tpg disabled. Note that the actual configfs_[un]depend_item() is done from seperate process context, as these are not intended to be called directly from configfs callbacks. Cc: Sawan Chandak Cc: Quinn Tran Cc: Saurav Kashyap Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 72 ++++++++++++++++++++++++++++++-------- drivers/scsi/qla2xxx/tcm_qla2xxx.h | 3 ++ 2 files changed, 61 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index db43b2893525..5bdc44035981 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -941,15 +941,41 @@ static ssize_t tcm_qla2xxx_tpg_show_enable( atomic_read(&tpg->lport_tpg_enabled)); } +static void tcm_qla2xxx_depend_tpg(struct work_struct *work) +{ + struct tcm_qla2xxx_tpg *base_tpg = container_of(work, + struct tcm_qla2xxx_tpg, tpg_base_work); + struct se_portal_group *se_tpg = &base_tpg->se_tpg; + struct scsi_qla_host *base_vha = base_tpg->lport->qla_vha; + + if (!configfs_depend_item(se_tpg->se_tpg_tfo->tf_subsys, + &se_tpg->tpg_group.cg_item)) { + atomic_set(&base_tpg->lport_tpg_enabled, 1); + qlt_enable_vha(base_vha); + } + complete(&base_tpg->tpg_base_comp); +} + +static void tcm_qla2xxx_undepend_tpg(struct work_struct *work) +{ + struct tcm_qla2xxx_tpg *base_tpg = container_of(work, + struct tcm_qla2xxx_tpg, tpg_base_work); + struct se_portal_group *se_tpg = &base_tpg->se_tpg; + struct scsi_qla_host *base_vha = base_tpg->lport->qla_vha; + + if (!qlt_stop_phase1(base_vha->vha_tgt.qla_tgt)) { + atomic_set(&base_tpg->lport_tpg_enabled, 0); + configfs_undepend_item(se_tpg->se_tpg_tfo->tf_subsys, + &se_tpg->tpg_group.cg_item); + } + complete(&base_tpg->tpg_base_comp); +} + static ssize_t tcm_qla2xxx_tpg_store_enable( struct se_portal_group *se_tpg, const char *page, size_t count) { - struct se_wwn *se_wwn = se_tpg->se_tpg_wwn; - struct tcm_qla2xxx_lport *lport = container_of(se_wwn, - struct tcm_qla2xxx_lport, lport_wwn); - struct scsi_qla_host *vha = lport->qla_vha; struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg, struct tcm_qla2xxx_tpg, se_tpg); unsigned long op; @@ -964,19 +990,28 @@ static ssize_t tcm_qla2xxx_tpg_store_enable( pr_err("Illegal value for tpg_enable: %lu\n", op); return -EINVAL; } - if (op) { - atomic_set(&tpg->lport_tpg_enabled, 1); - qlt_enable_vha(vha); + if (atomic_read(&tpg->lport_tpg_enabled)) + return -EEXIST; + + INIT_WORK(&tpg->tpg_base_work, tcm_qla2xxx_depend_tpg); } else { - if (!vha->vha_tgt.qla_tgt) { - pr_err("struct qla_hw_data *vha->vha_tgt.qla_tgt is NULL\n"); - return -ENODEV; - } - atomic_set(&tpg->lport_tpg_enabled, 0); - qlt_stop_phase1(vha->vha_tgt.qla_tgt); + if (!atomic_read(&tpg->lport_tpg_enabled)) + return count; + + INIT_WORK(&tpg->tpg_base_work, tcm_qla2xxx_undepend_tpg); } + init_completion(&tpg->tpg_base_comp); + schedule_work(&tpg->tpg_base_work); + wait_for_completion(&tpg->tpg_base_comp); + if (op) { + if (!atomic_read(&tpg->lport_tpg_enabled)) + return -ENODEV; + } else { + if (atomic_read(&tpg->lport_tpg_enabled)) + return -EPERM; + } return count; } @@ -1703,6 +1738,9 @@ static int tcm_qla2xxx_lport_register_npiv_cb(struct scsi_qla_host *base_vha, struct scsi_qla_host *npiv_vha; struct tcm_qla2xxx_lport *lport = (struct tcm_qla2xxx_lport *)target_lport_ptr; + struct tcm_qla2xxx_lport *base_lport = + (struct tcm_qla2xxx_lport *)base_vha->vha_tgt.target_lport_ptr; + struct tcm_qla2xxx_tpg *base_tpg; struct fc_vport_identifiers vport_id; if (!qla_tgt_mode_enabled(base_vha)) { @@ -1710,6 +1748,13 @@ static int tcm_qla2xxx_lport_register_npiv_cb(struct scsi_qla_host *base_vha, return -EPERM; } + if (!base_lport || !base_lport->tpg_1 || + !atomic_read(&base_lport->tpg_1->lport_tpg_enabled)) { + pr_err("qla2xxx base_lport or tpg_1 not available\n"); + return -EPERM; + } + base_tpg = base_lport->tpg_1; + memset(&vport_id, 0, sizeof(vport_id)); vport_id.port_name = npiv_wwpn; vport_id.node_name = npiv_wwnn; @@ -1728,7 +1773,6 @@ static int tcm_qla2xxx_lport_register_npiv_cb(struct scsi_qla_host *base_vha, npiv_vha = (struct scsi_qla_host *)vport->dd_data; npiv_vha->vha_tgt.target_lport_ptr = target_lport_ptr; lport->qla_vha = npiv_vha; - scsi_host_get(npiv_vha->host); return 0; } diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h index 275d8b9a7a34..a90966d3c0d6 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h @@ -43,6 +43,9 @@ struct tcm_qla2xxx_tpg { struct tcm_qla2xxx_tpg_attrib tpg_attrib; /* Returned by tcm_qla2xxx_make_tpg() */ struct se_portal_group se_tpg; + /* Items for dealing with configfs_depend_item */ + struct completion tpg_base_comp; + struct work_struct tpg_base_work; }; struct tcm_qla2xxx_fc_loopid { -- cgit v1.2.3 From 84197a36e9d78213da17b96fb838afcca4e150ea Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 30 Jan 2014 09:52:21 -0800 Subject: tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs This patch fixes the NAA formatted name used by EVPD=0x83 device identifer to reflect the proper NPIV enabled WWPN. Cc: Sawan Chandak Cc: Quinn Tran Cc: Saurav Kashyap Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 27 +-------------------------- drivers/scsi/qla2xxx/tcm_qla2xxx.h | 4 ---- 2 files changed, 1 insertion(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 5bdc44035981..788c4fe2b0c9 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -182,20 +182,6 @@ static int tcm_qla2xxx_npiv_parse_wwn( return 0; } -static ssize_t tcm_qla2xxx_npiv_format_wwn(char *buf, size_t len, - u64 wwpn, u64 wwnn) -{ - u8 b[8], b2[8]; - - put_unaligned_be64(wwpn, b); - put_unaligned_be64(wwnn, b2); - return snprintf(buf, len, - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x," - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x", - b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7], - b2[0], b2[1], b2[2], b2[3], b2[4], b2[5], b2[6], b2[7]); -} - static char *tcm_qla2xxx_npiv_get_fabric_name(void) { return "qla2xxx_npiv"; @@ -227,15 +213,6 @@ static char *tcm_qla2xxx_get_fabric_wwn(struct se_portal_group *se_tpg) return lport->lport_naa_name; } -static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg) -{ - struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg, - struct tcm_qla2xxx_tpg, se_tpg); - struct tcm_qla2xxx_lport *lport = tpg->lport; - - return &lport->lport_npiv_name[0]; -} - static u16 tcm_qla2xxx_get_tag(struct se_portal_group *se_tpg) { struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg, @@ -1811,8 +1788,6 @@ static struct se_wwn *tcm_qla2xxx_npiv_make_lport( } lport->lport_npiv_wwpn = npiv_wwpn; lport->lport_npiv_wwnn = npiv_wwnn; - tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0], - TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn); sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn); ret = tcm_qla2xxx_init_lport(lport); @@ -1921,7 +1896,7 @@ static struct target_core_fabric_ops tcm_qla2xxx_ops = { static struct target_core_fabric_ops tcm_qla2xxx_npiv_ops = { .get_fabric_name = tcm_qla2xxx_npiv_get_fabric_name, .get_fabric_proto_ident = tcm_qla2xxx_get_fabric_proto_ident, - .tpg_get_wwn = tcm_qla2xxx_npiv_get_fabric_wwn, + .tpg_get_wwn = tcm_qla2xxx_get_fabric_wwn, .tpg_get_tag = tcm_qla2xxx_get_tag, .tpg_get_default_depth = tcm_qla2xxx_get_default_depth, .tpg_get_pr_transport_id = tcm_qla2xxx_get_pr_transport_id, diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h index a90966d3c0d6..33aaac8c7d59 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h @@ -4,8 +4,6 @@ #define TCM_QLA2XXX_VERSION "v0.1" /* length of ASCII WWPNs including pad */ #define TCM_QLA2XXX_NAMELEN 32 -/* lenth of ASCII NPIV 'WWPN+WWNN' including pad */ -#define TCM_QLA2XXX_NPIV_NAMELEN 66 #include "qla_target.h" @@ -65,8 +63,6 @@ struct tcm_qla2xxx_lport { char lport_name[TCM_QLA2XXX_NAMELEN]; /* ASCII formatted naa WWPN for VPD page 83 etc */ char lport_naa_name[TCM_QLA2XXX_NAMELEN]; - /* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */ - char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN]; /* map for fc_port pointers in 24-bit FC Port ID space */ struct btree_head32 lport_fcport_map; /* vmalloc-ed memory for fc_port pointers for 16-bit FC loop ID */ -- cgit v1.2.3 From 9955e8d15f53e53540aaed7bcef640142e65e900 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 19 Feb 2014 17:43:04 +0100 Subject: s390/cio: Fix missing subchannels after CHPID configure on Performing a Channel-Path configure on operation on a Channel-Path ID (CHPID) does not trigger a scan for subchannels that might have become available through that CHPID. As a result, some subchannels and associated I/O devices might be missing. Fix this by adding the missing scan. This problem was introduced by commit c820de39, "[S390] cio: Rework css driver.", but wasn't noticed earlier because the machine usually also generates a Channel-Report-Word when the first CHPID of a subchannel is configured on, resulting in a separate scan for that subchannel. The problem only becomes apparent when this first CHPID is not working properly and additional working CHPIDs are subsequently configured on without any effect on the availability of the affected subchannel. Reviewed-by: Sebastian Ott Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index f6b9188c5af5..9f0ea6cb6922 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -610,6 +610,7 @@ void chsc_chp_online(struct chp_id chpid) css_wait_for_slow_path(); for_each_subchannel_staged(__s390_process_res_acc, NULL, &link); + css_schedule_reprobe(); } } -- cgit v1.2.3 From eae39cb4934d3daab3ec828c5201c955b2e56af9 Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Mon, 17 Feb 2014 13:11:23 +0530 Subject: mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver Fixes: commit a919e51161b58ed7e6e663daba99ab7d558808f3 mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Fixes ecclayout mismatch introduced in above commit for following ecc-schemes: - OMAP_ECC_BCH4_CODE_HW_DETECTION_SW - OMAP_ECC_BCH8_CODE_HW_DETECTION_SW However, this patch also touches other ecc-schemes as the fix required refactoring common code, into ecc-scheme specific code. This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3] +---+------------+-------------++-------------+-------------+ |OOB|BCH8_CODE_HW|BCH8_CODE_HW_||HAM1_CODE_HW |HAM1_CODE_HW | |pos| | DETECTION_SW||(x8 device) |(x16 device) | +---+------------+-------------++-------------+-------------+ | 0 |BADBLK_MARK | BADBLK_MARK || BADBLK_MARK | BADBLK_MARK | | 1 |BADBLK_MARK | BADBLK_MARK || eccpos[0] | BADBLK_MARK | | 2 | eccpos[0] | eccpos[0] || eccpos[1] | eccpos[0] | | 3 | eccpos[1] | eccpos[1] || eccpos[2] | eccpos[1] | | 4 | eccpos[2] | eccpos[2] || eccpos[3] | eccpos[2] | | 5 | eccpos[3] | eccpos[3] || eccpos[4] | eccpos[3] | | 6 | eccpos[4] | eccpos[4] || eccpos[5] | eccpos[4] | | 7 | eccpos[5] | eccpos[5] || eccpos[6] | eccpos[5] | | 8 | eccpos[6] | eccpos[6] || eccpos[7] | eccpos[6] | | 9 | eccpos[7] | eccpos[7] || eccpos[8] | eccpos[7] | |10 | eccpos[8] | eccpos[8] || eccpos[9] | eccpos[8] | |11 | eccpos[9] | eccpos[9] || eccpos[10] | eccpos[9] | |12 | eccpos[10] | eccpos[10] || eccpos[11] | eccpos[10] | |13 | eccpos[11] | eccpos[11] || oobfree[0] | eccpos[11] | |14 | eccpos[12] | eccpos[12] || oobfree[1] | oobfree[0] | |15 | eccpos[13] | || oobfree[2] | oobfree[1] | +---+------------+-------------++-------------+-------------+ |16 | eccpos[14] | eccpos[13] || oobfree[3] | oobfree[2] | |...| [...] | [...] || [...] | [...] | |56 | eccpos[54] | eccpos[51] || oobfree[43] | oobfree[42] | |57 | eccpos[55] | || oobfree[44] | oobfree[43] | +===+============+=============+==============+=============+ |58 | oobfree[0] | oobfree[0] || oobfree[45] | oobfree[44] | |59 | oobfree[1] | oobfree[1] || oobfree[46] | oobfree[45] | |60 | oobfree[2] | oobfree[2] || oobfree[47] | oobfree[46] | |61 | oobfree[3] | oobfree[3] || oobfree[48] | oobfree[47] | |62 | oobfree[4] | oobfree[4] || oobfree[49] | oobfree[48] | |63 | oobfree[5] | oobfree[5] || oobfree[50] | oobfree[49] | +---+------------+-------------+--------------+-------------+ [1] ecc-layout expected by ROM code, as specified in SoC TRM under: Chapter="Initialization" Section="Device Initialization by ROM code" Sub-Section="Memory Booting" Heading="NAND" Figure="ECC Locations in NAND Spare Areas" [2] ecc-layout updates in u-boot http://lists.denx.de/pipermail/u-boot/2013-November/167551.html [3] u-boot configurations to match above ecc-layout are documented at https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide CC: # 3.13.x+ Reported-by: Enric Balletbo Serra Tested-by: Enric Balletbo i Serra Tested-by: Stefan Roese Signed-off-by: Pekon Gupta Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index ef4190a02b7b..34ef941e3bfb 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1633,6 +1633,7 @@ static int omap_nand_probe(struct platform_device *pdev) int i; dma_cap_mask_t mask; unsigned sig; + unsigned oob_index; struct resource *res; struct mtd_part_parser_data ppdata = {}; @@ -1826,9 +1827,11 @@ static int omap_nand_probe(struct platform_device *pdev) (mtd->writesize / nand_chip->ecc.size); if (nand_chip->options & NAND_BUSWIDTH_16) - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + oob_index = BADBLOCK_MARKER_LENGTH; else - ecclayout->eccpos[0] = 1; + oob_index = 1; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; ecclayout->oobfree->offset = ecclayout->eccpos[0] + ecclayout->eccbytes; break; @@ -1847,7 +1850,12 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { + ecclayout->eccpos[i] = oob_index; + if (((i + 1) % nand_chip->ecc.bytes) == 0) + oob_index++; + } ecclayout->oobfree->offset = ecclayout->eccpos[0] + ecclayout->eccbytes; /* software bch library is used for locating errors */ @@ -1883,7 +1891,9 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; ecclayout->oobfree->offset = ecclayout->eccpos[0] + ecclayout->eccbytes; /* This ECC scheme requires ELM H/W block */ @@ -1913,7 +1923,12 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) { + ecclayout->eccpos[i] = oob_index; + if (((i + 1) % nand_chip->ecc.bytes) == 0) + oob_index++; + } ecclayout->oobfree->offset = ecclayout->eccpos[0] + ecclayout->eccbytes; /* software bch library is used for locating errors */ @@ -1956,7 +1971,9 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccbytes = nand_chip->ecc.bytes * (mtd->writesize / nand_chip->ecc.size); - ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + oob_index = BADBLOCK_MARKER_LENGTH; + for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) + ecclayout->eccpos[i] = oob_index; ecclayout->oobfree->offset = ecclayout->eccpos[0] + ecclayout->eccbytes; break; @@ -1975,8 +1992,6 @@ static int omap_nand_probe(struct platform_device *pdev) /* populate remaining ECC layout data */ ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH + ecclayout->eccbytes); - for (i = 1; i < ecclayout->eccbytes; i++) - ecclayout->eccpos[i] = ecclayout->eccpos[0] + i; /* check if NAND device's OOB is enough to store ECC signatures */ if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) { pr_err("not enough OOB bytes required = %d, available=%d\n", -- cgit v1.2.3 From aa6092f9835893290e77c3e24649def49dac1583 Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Mon, 17 Feb 2014 13:11:24 +0530 Subject: mtd: nand: omap: fix ecclayout->oobfree->offset 1) In current implementation, ecclayout->oobfree->offset is calculated with respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not be stored contiguously in OOB. So, this patch calculates ecclayout->oobfree->offset with respect to last ECC byte-position 'eccpos[ecclayout->eccbytes-1]'. 2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[] which should not be over-written by any file-system metadata. So this patch aligns oobfree->offset taking into account of such markers. CC: # 3.13.x+ Tested-by: Enric Balletbo i Serra Tested-by: Stefan Roese Signed-off-by: Pekon Gupta Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 34ef941e3bfb..58685ab6d865 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1832,8 +1832,9 @@ static int omap_nand_probe(struct platform_device *pdev) oob_index = 1; for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) ecclayout->eccpos[i] = oob_index; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + /* no reserved-marker in ecclayout for this ecc-scheme */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; break; case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: @@ -1856,8 +1857,9 @@ static int omap_nand_probe(struct platform_device *pdev) if (((i + 1) % nand_chip->ecc.bytes) == 0) oob_index++; } - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + /* include reserved-marker in ecclayout->oobfree calculation */ + ecclayout->oobfree->offset = 1 + + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, @@ -1894,8 +1896,9 @@ static int omap_nand_probe(struct platform_device *pdev) oob_index = BADBLOCK_MARKER_LENGTH; for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) ecclayout->eccpos[i] = oob_index; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; /* This ECC scheme requires ELM H/W block */ if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) { pr_err("nand: error: could not initialize ELM\n"); @@ -1929,8 +1932,9 @@ static int omap_nand_probe(struct platform_device *pdev) if (((i + 1) % nand_chip->ecc.bytes) == 0) oob_index++; } - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + /* include reserved-marker in ecclayout->oobfree calculation */ + ecclayout->oobfree->offset = 1 + + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, @@ -1974,8 +1978,9 @@ static int omap_nand_probe(struct platform_device *pdev) oob_index = BADBLOCK_MARKER_LENGTH; for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) ecclayout->eccpos[i] = oob_index; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; + /* reserved marker already included in ecclayout->eccbytes */ + ecclayout->oobfree->offset = + ecclayout->eccpos[ecclayout->eccbytes - 1] + 1; break; #else pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); -- cgit v1.2.3 From bb38eefb6858ce16b34716145b9597a5680aa54c Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Mon, 17 Feb 2014 13:11:25 +0530 Subject: mtd: nand: omap: fix ecclayout->oobfree->length This patch excludes reserved-marker byte-position from oobfree->length calculation. Thus all bytes from oobfree->offset till end of OOB are free. CC: # 3.13.x+ Signed-off-by: Pekon Gupta Signed-off-by: Brian Norris --- drivers/mtd/nand/omap2.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 58685ab6d865..bf642ceef681 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1994,9 +1994,8 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } - /* populate remaining ECC layout data */ - ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH + - ecclayout->eccbytes); + /* all OOB bytes from oobfree->offset till end off OOB are free */ + ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset; /* check if NAND device's OOB is enough to store ECC signatures */ if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) { pr_err("not enough OOB bytes required = %d, available=%d\n", -- cgit v1.2.3 From 10762e80489e73e2d52bf78e0869f253f42821bd Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sun, 23 Feb 2014 12:52:44 +0000 Subject: target/sbc: Fix sbc_dif_copy_prot addr offset bug This patch fixes a bug in sbc_dif_copy_prot() where the updated addr offset did not take into account the case where the associated scatterlist had not been incremented. This addresses the case where incoming protection scatterlists may contain a length smaller than PAGE_SIZE across multiple entires, when the target protection scatterlists are always being explicitly filled up to PAGE_SIZE before adding another entry. Cc: Martin K. Petersen Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_sbc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index a4489444ffbc..ef1a58a134aa 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -1074,7 +1074,7 @@ sbc_dif_copy_prot(struct se_cmd *cmd, unsigned int sectors, bool read, struct scatterlist *psg; void *paddr, *addr; unsigned int i, len, left; - unsigned int offset = 0; + unsigned int offset = sg_off; left = sectors * dev->prot_length; @@ -1084,11 +1084,10 @@ sbc_dif_copy_prot(struct se_cmd *cmd, unsigned int sectors, bool read, if (offset >= sg->length) { sg = sg_next(sg); offset = 0; - sg_off = sg->offset; } paddr = kmap_atomic(sg_page(psg)) + psg->offset; - addr = kmap_atomic(sg_page(sg)) + sg_off; + addr = kmap_atomic(sg_page(sg)) + sg->offset + offset; if (read) memcpy(paddr, addr, len); -- cgit v1.2.3 From 94387aa7cec8c5386b405b852cf3e5be38456fc7 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sun, 23 Feb 2014 14:04:09 +0000 Subject: target: Add DIF sense codes in transport_generic_request_failure This patch adds the three missing DIF related sense codes within transport_generic_request_failure(), which are required to ensure that the correct ASC/ASQC is generated by the subsequent call to transport_send_check_condition_and_sense(). Cc: Martin K. Petersen Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 24b4f65d8777..2956250b7225 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1601,6 +1601,9 @@ void transport_generic_request_failure(struct se_cmd *cmd, case TCM_CHECK_CONDITION_ABORT_CMD: case TCM_CHECK_CONDITION_UNIT_ATTENTION: case TCM_CHECK_CONDITION_NOT_READY: + case TCM_LOGICAL_BLOCK_GUARD_CHECK_FAILED: + case TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED: + case TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED: break; case TCM_OUT_OF_RESOURCES: sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; -- cgit v1.2.3 From fc272ec7a2dfe002b823c78f8ef0eb88042e2762 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 23 Feb 2014 14:20:08 +0200 Subject: Target/sbc: Don't use sg as iterator in sbc_verify_read Because then this sg is passed to sbc_copy_prot which will hit a protection fault in cases we have more than a single sg. Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_sbc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index ef1a58a134aa..42f18fc1067b 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -1162,7 +1162,7 @@ sbc_dif_verify_read(struct se_cmd *cmd, sector_t start, unsigned int sectors, { struct se_device *dev = cmd->se_dev; struct se_dif_v1_tuple *sdt; - struct scatterlist *dsg; + struct scatterlist *dsg, *psg = sg; sector_t sector = start; void *daddr, *paddr; int i, j, offset = sg_off; @@ -1170,14 +1170,14 @@ sbc_dif_verify_read(struct se_cmd *cmd, sector_t start, unsigned int sectors, for_each_sg(cmd->t_data_sg, dsg, cmd->t_data_nents, i) { daddr = kmap_atomic(sg_page(dsg)) + dsg->offset; - paddr = kmap_atomic(sg_page(sg)) + sg->offset; + paddr = kmap_atomic(sg_page(psg)) + sg->offset; for (j = 0; j < dsg->length; j += dev->dev_attrib.block_size) { - if (offset >= sg->length) { + if (offset >= psg->length) { kunmap_atomic(paddr); - sg = sg_next(sg); - paddr = kmap_atomic(sg_page(sg)) + sg->offset; + psg = sg_next(psg); + paddr = kmap_atomic(sg_page(psg)) + psg->offset; offset = 0; } -- cgit v1.2.3 From 1acacc0784aab45627b6009e0e9224886279ac0b Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 19 Feb 2014 20:32:33 -0500 Subject: dm thin: fix the error path for the thin device constructor dm_pool_close_thin_device() must be called if dm_set_target_max_io_len() fails in thin_ctr(). Otherwise __pool_destroy() will fail because the pool will still have an open thin device: device-mapper: thin metadata: attempt to close pmd when 1 device(s) are still open device-mapper: thin: __pool_destroy: dm_pool_metadata_close() failed. Also, must establish error code if failing thin_ctr() because the pool is in fail_io mode. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org --- drivers/md/dm-thin.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index d501e436a7d9..4cf4b198cb60 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -2895,6 +2895,7 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) if (get_pool_mode(tc->pool) == PM_FAIL) { ti->error = "Couldn't open thin device, Pool is in fail mode"; + r = -EINVAL; goto bad_thin_open; } @@ -2906,7 +2907,7 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) r = dm_set_target_max_io_len(ti, tc->pool->sectors_per_block); if (r) - goto bad_thin_open; + goto bad_target_max_io_len; ti->num_flush_bios = 1; ti->flush_supported = true; @@ -2927,6 +2928,8 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) return 0; +bad_target_max_io_len: + dm_pool_close_thin_device(tc->td); bad_thin_open: __pool_dec(tc->pool); bad_pool_lookup: -- cgit v1.2.3 From 6f58c780e5a5b43a6d2121e0d43cdcba1d3cc5fc Mon Sep 17 00:00:00 2001 From: "Dr. Greg Wettstein" Date: Mon, 24 Feb 2014 13:59:53 -0600 Subject: qla2xxx: Fix kernel panic on selective retransmission request A selective retransmission request (SRR) is a fibre-channel protocol control request which provides support for requesting retransmission of a data sequence in response to an issue such as frame loss or corruption. These events are experienced infrequently in fibre-channel based networks which makes it difficult to test and assess codepaths which handle these events. We were fortunate enough, for some definition of fortunate, to have a metro-area single-mode SAN link which, at 10 GBPS sustained load levels, would consistently generate SRR's in a SCST based target implementation using our SCST/in-kernel Qlogic target interface driver. In response to an SRR the in-kernel Qlogic target driver immediately panics resulting in a catastrophic storage failure for serviced initiators. The culprit was a debug statement in the qla_target.c file which does not verify that a pointer to the SCSI CDB is not null. The unchecked pointer dereference results in the kernel panic and resultant system failure. The other two references to the SCSI CDB by the SRR handling code use a ternary operator to verify a non-null pointer is being acted on. This patch simply adds a similar test to the implicated debug statement. This patch is a candidate for any stable kernel being maintained since it addresses a potentially catastrophic event with minimal downside. Signed-off-by: Dr. Greg Wettstein Cc: #3.5+ Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_target.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index f2e1c5a5fdbb..0cb73074c199 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -3202,7 +3202,8 @@ restart: ql_dbg(ql_dbg_tgt_mgt, vha, 0xf02c, "SRR cmd %p (se_cmd %p, tag %d, op %x), " "sg_cnt=%d, offset=%d", cmd, &cmd->se_cmd, cmd->tag, - se_cmd->t_task_cdb[0], cmd->sg_cnt, cmd->offset); + se_cmd->t_task_cdb ? se_cmd->t_task_cdb[0] : 0, + cmd->sg_cnt, cmd->offset); qlt_handle_srr(vha, sctio, imm); -- cgit v1.2.3 From 760dbe1dcb6d3dd3ead73dc69b23f206b52273bb Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Mon, 24 Feb 2014 14:39:00 +0000 Subject: staging:iio:adc:MXS:LRADC: fix touchscreen statemachine Releasing the touchscreen lets the internal statemachine left in a wrong state. Due to this the release coordinate will be reported again by accident when the next touchscreen event happens. This change sets up the correct state when waiting for the next touchscreen event. This has led to reported issues with calibrating the touchscreen. Bug was introduced somewhere in the series that began with 18da755de59b406ce2371a55fb15ed676eb08ed2 Staging/iio/adc/touchscreen/MXS: add proper clock handling in which the way this driver worked was substantially changed to be interrupt driven rather than relying on a busy loop. This was a regression in the 3.13 kernel. Signed-off-by: Juergen Beisert Tested-by: Alexandre Belloni Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 7fc66a6a6e36..514844efac75 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -757,6 +757,7 @@ static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) } /* if it is released, wait for the next touch via IRQ */ + lradc->cur_plate = LRADC_TOUCH; mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1); mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); } -- cgit v1.2.3 From 7fe412d07d881020022a188b95c63a19b651a391 Mon Sep 17 00:00:00 2001 From: Venkatesh Srinivas Date: Mon, 24 Feb 2014 14:13:32 -0800 Subject: vhost/scsi: Check LUN structure byte 0 is set to 1, per spec The virtio spec requires byte 0 of the virtio-scsi LUN structure to be '1'. Signed-off-by: Venkatesh Srinivas Reviewed-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/vhost/scsi.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 0a025b8e2a12..e48d4a672580 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -1001,6 +1001,12 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq) break; } + /* virtio-scsi spec requires byte 0 of the lun to be 1 */ + if (unlikely(v_req.lun[0] != 1)) { + vhost_scsi_send_bad_target(vs, vq, head, out); + continue; + } + /* Extract the tpgt */ target = v_req.lun[1]; tpg = ACCESS_ONCE(vs_tpg[target]); -- cgit v1.2.3 From 260ea9c2e2d330303163e286ab01b66dbcfe3a6f Mon Sep 17 00:00:00 2001 From: Manu Gupta Date: Mon, 24 Feb 2014 12:12:28 -0600 Subject: staging: r8188eu: Add new device ID The D-Link DWA-123 REV D1 with USB ID 2001:3310 uses this driver. Signed-off-by: Manu Gupta Signed-off-by: Larry Finger Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index a70dcef1419e..2f40ff5901d6 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -55,6 +55,7 @@ static struct usb_device_id rtw_usb_id_tbl[] = { /****** 8188EUS ********/ {USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */ {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */ + {USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */ {} /* Terminating entry */ }; -- cgit v1.2.3 From c0f5eeed0f4cef4f05b74883a7160e7edde58b6a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 24 Feb 2014 09:39:27 +0100 Subject: i7core_edac: Fix PCI device reference count The reference count changes done by pci_get_device can be a little misleading when the usage diverges from the most common scheme. The reference count of the device passed as the last parameter is always decreased, even if the function returns no new device. So if we are going to try alternative device IDs, we must manually increment the device reference count before each retry. If we don't, we end up decreasing the reference count, and after a few modprobe/rmmod cycles the PCI devices will vanish. In other words and as Alan put it: without this fix the EDAC code corrupts the PCI device list. This fixes kernel bug #50491: https://bugzilla.kernel.org/show_bug.cgi?id=50491 Signed-off-by: Jean Delvare Link: http://lkml.kernel.org/r/20140224093927.7659dd9d@endymion.delvare Reviewed-by: Alan Cox Cc: Mauro Carvalho Chehab Cc: Doug Thompson Cc: stable@vger.kernel.org Signed-off-by: Borislav Petkov --- drivers/edac/i7core_edac.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 87533ca7752e..d871275196f6 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -1334,14 +1334,19 @@ static int i7core_get_onedevice(struct pci_dev **prev, * is at addr 8086:2c40, instead of 8086:2c41. So, we need * to probe for the alternate address in case of failure */ - if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev) + if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev) { + pci_dev_get(*prev); /* pci_get_device will put it */ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev); + } - if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev) + if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && + !pdev) { + pci_dev_get(*prev); /* pci_get_device will put it */ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT, *prev); + } if (!pdev) { if (*prev) { -- cgit v1.2.3 From 75135da0d68419ef8a925f4c1d5f63d8046e314d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 25 Feb 2014 09:43:13 +0100 Subject: i7300_edac: Fix device reference count pci_get_device() decrements the reference count of "from" (last argument) so when we break off the loop successfully we have only one device reference - and we don't know which device we have. If we want a reference to each device, we must take them explicitly and let the pci_get_device() walk complete to avoid duplicate references. This is serious, as over-putting device references will cause the device to eventually disappear. Without this fix, the kernel crashes after a few insmod/rmmod cycles. Tested on an Intel S7000FC4UR system with a 7300 chipset. Signed-off-by: Jean Delvare Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare Cc: Mauro Carvalho Chehab Cc: Doug Thompson Cc: stable@vger.kernel.org Signed-off-by: Borislav Petkov --- drivers/edac/i7300_edac.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c index d63f4798f7d0..57e96a3350f0 100644 --- a/drivers/edac/i7300_edac.c +++ b/drivers/edac/i7300_edac.c @@ -943,33 +943,35 @@ static int i7300_get_devices(struct mem_ctl_info *mci) /* Attempt to 'get' the MCH register we want */ pdev = NULL; - while (!pvt->pci_dev_16_1_fsb_addr_map || - !pvt->pci_dev_16_2_fsb_err_regs) { - pdev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_I7300_MCH_ERR, pdev); - if (!pdev) { - /* End of list, leave */ - i7300_printk(KERN_ERR, - "'system address,Process Bus' " - "device not found:" - "vendor 0x%x device 0x%x ERR funcs " - "(broken BIOS?)\n", - PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_I7300_MCH_ERR); - goto error; - } - + while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7300_MCH_ERR, + pdev))) { /* Store device 16 funcs 1 and 2 */ switch (PCI_FUNC(pdev->devfn)) { case 1: - pvt->pci_dev_16_1_fsb_addr_map = pdev; + if (!pvt->pci_dev_16_1_fsb_addr_map) + pvt->pci_dev_16_1_fsb_addr_map = + pci_dev_get(pdev); break; case 2: - pvt->pci_dev_16_2_fsb_err_regs = pdev; + if (!pvt->pci_dev_16_2_fsb_err_regs) + pvt->pci_dev_16_2_fsb_err_regs = + pci_dev_get(pdev); break; } } + if (!pvt->pci_dev_16_1_fsb_addr_map || + !pvt->pci_dev_16_2_fsb_err_regs) { + /* At least one device was not found */ + i7300_printk(KERN_ERR, + "'system address,Process Bus' device not found:" + "vendor 0x%x device 0x%x ERR funcs (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7300_MCH_ERR); + goto error; + } + edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s %x:%x\n", pci_name(pvt->pci_dev_16_0_fsb_ctlr), pvt->pci_dev_16_0_fsb_ctlr->vendor, -- cgit v1.2.3 From da87ca4d4ca101f177fffd84f1f0a5e4c0343557 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 19 Feb 2014 16:19:35 -0800 Subject: ioat: fix tasklet tear down Since commit 77873803363c "net_dma: mark broken" we no longer pin dma engines active for the network-receive-offload use case. As a result the ->free_chan_resources() that occurs after the driver self test no longer has a NET_DMA induced ->alloc_chan_resources() to back it up. A late firing irq can lead to ksoftirqd spinning indefinitely due to the tasklet_disable() performed by ->free_chan_resources(). Only ->alloc_chan_resources() can clear this condition in affected kernels. This problem has been present since commit 3e037454bcfa "I/OAT: Add support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the NET_DMA use case is deprecated we can revisit moving the driver to use threaded irqs. For now, just tear down the irq and tasklet properly by: 1/ Disable the irq from triggering the tasklet 2/ Disable the irq from re-arming 3/ Flush inflight interrupts 4/ Flush the timer 5/ Flush inflight tasklets References: https://lkml.org/lkml/2014/1/27/282 https://lkml.org/lkml/2014/2/19/672 Cc: Ingo Molnar Cc: Steven Rostedt Cc: Reported-by: Mike Galbraith Reported-by: Stanislav Fomichev Tested-by: Mike Galbraith Tested-by: Stanislav Fomichev Reviewed-by: Thomas Gleixner Signed-off-by: Dan Williams --- drivers/dma/ioat/dma.c | 52 ++++++++++++++++++++++++++++++++++++++++------- drivers/dma/ioat/dma.h | 1 + drivers/dma/ioat/dma_v2.c | 11 +++++----- drivers/dma/ioat/dma_v3.c | 3 +++ 4 files changed, 54 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index 87529181efcc..4e3549a16132 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -77,7 +77,8 @@ static irqreturn_t ioat_dma_do_interrupt(int irq, void *data) attnstatus = readl(instance->reg_base + IOAT_ATTNSTATUS_OFFSET); for_each_set_bit(bit, &attnstatus, BITS_PER_LONG) { chan = ioat_chan_by_index(instance, bit); - tasklet_schedule(&chan->cleanup_task); + if (test_bit(IOAT_RUN, &chan->state)) + tasklet_schedule(&chan->cleanup_task); } writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET); @@ -93,7 +94,8 @@ static irqreturn_t ioat_dma_do_interrupt_msix(int irq, void *data) { struct ioat_chan_common *chan = data; - tasklet_schedule(&chan->cleanup_task); + if (test_bit(IOAT_RUN, &chan->state)) + tasklet_schedule(&chan->cleanup_task); return IRQ_HANDLED; } @@ -116,7 +118,6 @@ void ioat_init_channel(struct ioatdma_device *device, struct ioat_chan_common *c chan->timer.function = device->timer_fn; chan->timer.data = data; tasklet_init(&chan->cleanup_task, device->cleanup_fn, data); - tasklet_disable(&chan->cleanup_task); } /** @@ -354,13 +355,49 @@ static int ioat1_dma_alloc_chan_resources(struct dma_chan *c) writel(((u64) chan->completion_dma) >> 32, chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH); - tasklet_enable(&chan->cleanup_task); + set_bit(IOAT_RUN, &chan->state); ioat1_dma_start_null_desc(ioat); /* give chain to dma device */ dev_dbg(to_dev(chan), "%s: allocated %d descriptors\n", __func__, ioat->desccount); return ioat->desccount; } +void ioat_stop(struct ioat_chan_common *chan) +{ + struct ioatdma_device *device = chan->device; + struct pci_dev *pdev = device->pdev; + int chan_id = chan_num(chan); + struct msix_entry *msix; + + /* 1/ stop irq from firing tasklets + * 2/ stop the tasklet from re-arming irqs + */ + clear_bit(IOAT_RUN, &chan->state); + + /* flush inflight interrupts */ + switch (device->irq_mode) { + case IOAT_MSIX: + msix = &device->msix_entries[chan_id]; + synchronize_irq(msix->vector); + break; + case IOAT_MSI: + case IOAT_INTX: + synchronize_irq(pdev->irq); + break; + default: + break; + } + + /* flush inflight timers */ + del_timer_sync(&chan->timer); + + /* flush inflight tasklet runs */ + tasklet_kill(&chan->cleanup_task); + + /* final cleanup now that everything is quiesced and can't re-arm */ + device->cleanup_fn((unsigned long) &chan->common); +} + /** * ioat1_dma_free_chan_resources - release all the descriptors * @chan: the channel to be cleaned @@ -379,9 +416,7 @@ static void ioat1_dma_free_chan_resources(struct dma_chan *c) if (ioat->desccount == 0) return; - tasklet_disable(&chan->cleanup_task); - del_timer_sync(&chan->timer); - ioat1_cleanup(ioat); + ioat_stop(chan); /* Delay 100ms after reset to allow internal DMA logic to quiesce * before removing DMA descriptor resources. @@ -526,8 +561,11 @@ ioat1_dma_prep_memcpy(struct dma_chan *c, dma_addr_t dma_dest, static void ioat1_cleanup_event(unsigned long data) { struct ioat_dma_chan *ioat = to_ioat_chan((void *) data); + struct ioat_chan_common *chan = &ioat->base; ioat1_cleanup(ioat); + if (!test_bit(IOAT_RUN, &chan->state)) + return; writew(IOAT_CHANCTRL_RUN, ioat->base.reg_base + IOAT_CHANCTRL_OFFSET); } diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 11fb877ddca9..e982f00a9843 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -356,6 +356,7 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan, void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type); void ioat_kobject_del(struct ioatdma_device *device); int ioat_dma_setup_interrupts(struct ioatdma_device *device); +void ioat_stop(struct ioat_chan_common *chan); extern const struct sysfs_ops ioat_sysfs_ops; extern struct ioat_sysfs_entry ioat_version_attr; extern struct ioat_sysfs_entry ioat_cap_attr; diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 5d3affe7e976..8d1058085eeb 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -190,8 +190,11 @@ static void ioat2_cleanup(struct ioat2_dma_chan *ioat) void ioat2_cleanup_event(unsigned long data) { struct ioat2_dma_chan *ioat = to_ioat2_chan((void *) data); + struct ioat_chan_common *chan = &ioat->base; ioat2_cleanup(ioat); + if (!test_bit(IOAT_RUN, &chan->state)) + return; writew(IOAT_CHANCTRL_RUN, ioat->base.reg_base + IOAT_CHANCTRL_OFFSET); } @@ -553,10 +556,10 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) ioat->issued = 0; ioat->tail = 0; ioat->alloc_order = order; + set_bit(IOAT_RUN, &chan->state); spin_unlock_bh(&ioat->prep_lock); spin_unlock_bh(&chan->cleanup_lock); - tasklet_enable(&chan->cleanup_task); ioat2_start_null_desc(ioat); /* check that we got off the ground */ @@ -566,7 +569,6 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) } while (i++ < 20 && !is_ioat_active(status) && !is_ioat_idle(status)); if (is_ioat_active(status) || is_ioat_idle(status)) { - set_bit(IOAT_RUN, &chan->state); return 1 << ioat->alloc_order; } else { u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); @@ -809,11 +811,8 @@ void ioat2_free_chan_resources(struct dma_chan *c) if (!ioat->ring) return; - tasklet_disable(&chan->cleanup_task); - del_timer_sync(&chan->timer); - device->cleanup_fn((unsigned long) c); + ioat_stop(chan); device->reset_hw(chan); - clear_bit(IOAT_RUN, &chan->state); spin_lock_bh(&chan->cleanup_lock); spin_lock_bh(&ioat->prep_lock); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 820817e97e62..b9b38a1cf92f 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -464,8 +464,11 @@ static void ioat3_cleanup(struct ioat2_dma_chan *ioat) static void ioat3_cleanup_event(unsigned long data) { struct ioat2_dma_chan *ioat = to_ioat2_chan((void *) data); + struct ioat_chan_common *chan = &ioat->base; ioat3_cleanup(ioat); + if (!test_bit(IOAT_RUN, &chan->state)) + return; writew(IOAT_CHANCTRL_RUN, ioat->base.reg_base + IOAT_CHANCTRL_OFFSET); } -- cgit v1.2.3 From f229006ec6beabf7b844653d92fa61f025fe3dcf Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 25 Feb 2014 22:05:35 +0000 Subject: irq-metag*: stop set_affinity vectoring to offline cpus Fix irq_set_affinity callbacks in the Meta IRQ chip drivers to AND cpu_online_mask into the cpumask when picking a CPU to vector the interrupt to. As Thomas pointed out, the /proc/irq/$N/smp_affinity interface doesn't filter out offline CPUs, so without this patch if you offline CPU0 and set an IRQ affinity to 0x3 it vectors the interrupt onto CPU0 even though it is offline. Reported-by: Thomas Gleixner Signed-off-by: James Hogan Cc: Thomas Gleixner Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org --- drivers/irqchip/irq-metag-ext.c | 2 +- drivers/irqchip/irq-metag.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-metag-ext.c b/drivers/irqchip/irq-metag-ext.c index 92c41ab4dbfd..2cb474ad8809 100644 --- a/drivers/irqchip/irq-metag-ext.c +++ b/drivers/irqchip/irq-metag-ext.c @@ -515,7 +515,7 @@ static int meta_intc_set_affinity(struct irq_data *data, * one cpu (the interrupt code doesn't support it), so we just * pick the first cpu we find in 'cpumask'. */ - cpu = cpumask_any(cpumask); + cpu = cpumask_any_and(cpumask, cpu_online_mask); thread = cpu_2_hwthread_id[cpu]; metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); diff --git a/drivers/irqchip/irq-metag.c b/drivers/irqchip/irq-metag.c index 8e94d7a3b20d..c16c186d97d3 100644 --- a/drivers/irqchip/irq-metag.c +++ b/drivers/irqchip/irq-metag.c @@ -201,7 +201,7 @@ static int metag_internal_irq_set_affinity(struct irq_data *data, * one cpu (the interrupt code doesn't support it), so we just * pick the first cpu we find in 'cpumask'. */ - cpu = cpumask_any(cpumask); + cpu = cpumask_any_and(cpumask, cpu_online_mask); thread = cpu_2_hwthread_id[cpu]; metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), -- cgit v1.2.3 From ff3a2b73b7d6d79038512d60690de18cd7aa4e21 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 25 Feb 2014 15:01:40 -0800 Subject: drivers/iommu/omap-iommu-debug.c: fix decimal permissions These should have been octal. Signed-off-by: Joe Perches Cc: Joerg Roedel Cc: Hiroshi DOYU Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/iommu/omap-iommu-debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c index d97fbe4fb9b1..80fffba7f12d 100644 --- a/drivers/iommu/omap-iommu-debug.c +++ b/drivers/iommu/omap-iommu-debug.c @@ -354,8 +354,8 @@ DEBUG_FOPS(mem); return -ENOMEM; \ } -#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600) -#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400) +#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 0600) +#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 0400) static int iommu_debug_register(struct device *dev, void *data) { -- cgit v1.2.3 From 01412886b735ef241f9a41adf9f707ce1522eb61 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 25 Feb 2014 15:01:41 -0800 Subject: drivers/fmc/fmc-write-eeprom.c: fix decimal permissions This 444 should have been octal. Signed-off-by: Joe Perches Cc: Alessandro Rubini Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/fmc/fmc-write-eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/fmc/fmc-write-eeprom.c b/drivers/fmc/fmc-write-eeprom.c index ee5b47904130..9bb2cbd5c9f2 100644 --- a/drivers/fmc/fmc-write-eeprom.c +++ b/drivers/fmc/fmc-write-eeprom.c @@ -27,7 +27,7 @@ FMC_PARAM_BUSID(fwe_drv); /* The "file=" is like the generic "gateware=" used elsewhere */ static char *fwe_file[FMC_MAX_CARDS]; static int fwe_file_n; -module_param_array_named(file, fwe_file, charp, &fwe_file_n, 444); +module_param_array_named(file, fwe_file, charp, &fwe_file_n, 0444); static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw, int write) -- cgit v1.2.3 From e66c176837462928a05a135bbe16cdce70536d6e Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 25 Feb 2014 10:35:37 -0800 Subject: intel_pstate: Change busy calculation to use fixed point math. Commit fcb6a15c2e (intel_pstate: Take core C0 time into account for core busy calculation) introduced a regression on some processor SKUs supported by intel_pstate. This was due to the truncation caused by using integer math to calculate core busy and C0 percentages. On a i7-4770K processor operating at 800Mhz going to 100% utilization the percent busy of the CPU using integer math is 22%, but it actually is 22.85%. This value scaled to the current frequency returned 97 which the PID interpreted as no error and did not adjust the P state. Tested on i7-4770K, i7-2600, i5-3230M. Fixes: fcb6a15c2e7e (intel_pstate: Take core C0 time into account for core busy calculation) References: https://lkml.org/lkml/2014/2/19/626 References: https://bugzilla.kernel.org/show_bug.cgi?id=70941 Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index e90816105921..2cd36b9297f3 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -39,9 +39,10 @@ #define BYT_TURBO_RATIOS 0x66c -#define FRAC_BITS 8 +#define FRAC_BITS 6 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS) #define fp_toint(X) ((X) >> FRAC_BITS) +#define FP_ROUNDUP(X) ((X) += 1 << FRAC_BITS) static inline int32_t mul_fp(int32_t x, int32_t y) { @@ -556,18 +557,20 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) static inline void intel_pstate_calc_busy(struct cpudata *cpu, struct sample *sample) { - u64 core_pct; - u64 c0_pct; + int32_t core_pct; + int32_t c0_pct; - core_pct = div64_u64(sample->aperf * 100, sample->mperf); + core_pct = div_fp(int_tofp((sample->aperf)), + int_tofp((sample->mperf))); + core_pct = mul_fp(core_pct, int_tofp(100)); + FP_ROUNDUP(core_pct); + + c0_pct = div_fp(int_tofp(sample->mperf), int_tofp(sample->tsc)); - c0_pct = div64_u64(sample->mperf * 100, sample->tsc); sample->freq = fp_toint( - mul_fp(int_tofp(cpu->pstate.max_pstate), - int_tofp(core_pct * 1000))); + mul_fp(int_tofp(cpu->pstate.max_pstate * 1000), core_pct)); - sample->core_pct_busy = mul_fp(int_tofp(core_pct), - div_fp(int_tofp(c0_pct + 1), int_tofp(100))); + sample->core_pct_busy = mul_fp(core_pct, c0_pct); } static inline void intel_pstate_sample(struct cpudata *cpu) @@ -579,6 +582,10 @@ static inline void intel_pstate_sample(struct cpudata *cpu) rdmsrl(MSR_IA32_MPERF, mperf); tsc = native_read_tsc(); + aperf = aperf >> FRAC_BITS; + mperf = mperf >> FRAC_BITS; + tsc = tsc >> FRAC_BITS; + cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT; cpu->samples[cpu->sample_ptr].aperf = aperf; cpu->samples[cpu->sample_ptr].mperf = mperf; @@ -610,7 +617,8 @@ static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu) core_busy = cpu->samples[cpu->sample_ptr].core_pct_busy; max_pstate = int_tofp(cpu->pstate.max_pstate); current_pstate = int_tofp(cpu->pstate.current_pstate); - return mul_fp(core_busy, div_fp(max_pstate, current_pstate)); + core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate)); + return FP_ROUNDUP(core_busy); } static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) -- cgit v1.2.3 From f8d5b9e9e5372f0deb7bc1ab1088a9b60b0a793d Mon Sep 17 00:00:00 2001 From: Sebastian Capella Date: Tue, 18 Feb 2014 17:52:08 -0800 Subject: PM / hibernate: Fix restore hang in freeze_processes() During restore, pm_notifier chain are called with PM_RESTORE_PREPARE. The firmware_class driver handler fw_pm_notify does not have a handler for this. As a result, it keeps a reader on the kmod.c umhelper_sem. During freeze_processes, the call to __usermodehelper_disable tries to take a write lock on this semaphore and hangs waiting. Signed-off-by: Sebastian Capella Acked-by: Ming Lei Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/base/firmware_class.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 8a97ddfa6122..c30df50e4440 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -1580,6 +1580,7 @@ static int fw_pm_notify(struct notifier_block *notify_block, switch (mode) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: + case PM_RESTORE_PREPARE: kill_requests_without_uevent(); device_cache_fw_images(); break; -- cgit v1.2.3 From a1989b330093578ea5470bea0a00f940c444c466 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 26 Feb 2014 10:07:04 +0100 Subject: dm mpath: fix stalls when handling invalid ioctls An invalid ioctl will never be valid, irrespective of whether multipath has active paths or not. So for invalid ioctls we do not have to wait for multipath to activate any paths, but can rather return an error code immediately. This fix resolves numerous instances of: udevd[]: worker [] unexpectedly returned with status 0x0100 that have been seen during testing. Signed-off-by: Hannes Reinecke Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-mpath.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 6eb9dc9ef8f3..422a9fdeb53e 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1626,8 +1626,11 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd, /* * Only pass ioctls through if the device sizes match exactly. */ - if (!r && ti->len != i_size_read(bdev->bd_inode) >> SECTOR_SHIFT) - r = scsi_verify_blk_ioctl(NULL, cmd); + if (!bdev || ti->len != i_size_read(bdev->bd_inode) >> SECTOR_SHIFT) { + int err = scsi_verify_blk_ioctl(NULL, cmd); + if (err) + r = err; + } if (r == -ENOTCONN && !fatal_signal_pending(current)) queue_work(kmultipathd, &m->process_queued_ios); -- cgit v1.2.3 From 0b7d25c347900e2550398e29e25caf0fefe3cab2 Mon Sep 17 00:00:00 2001 From: Christian Engelmayer Date: Thu, 23 Jan 2014 22:32:20 +0100 Subject: pwm: lp3943: Fix potential memory leak during request Fix a memory leak in the lp3943_pwm_request_map() error handling path. Make sure already allocated pwm map memory is freed correctly. Detected by Coverity: CID 1162829. Signed-off-by: Christian Engelmayer Acked-by: Milo Kim Signed-off-by: Thierry Reding --- drivers/pwm/pwm-lp3943.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c index 8a843a04c224..a40b9c34e9ff 100644 --- a/drivers/pwm/pwm-lp3943.c +++ b/drivers/pwm/pwm-lp3943.c @@ -52,8 +52,10 @@ lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm) offset = pwm_map->output[i]; /* Return an error if the pin is already assigned */ - if (test_and_set_bit(offset, &lp3943->pin_used)) + if (test_and_set_bit(offset, &lp3943->pin_used)) { + kfree(pwm_map); return ERR_PTR(-EBUSY); + } } return pwm_map; -- cgit v1.2.3 From f3ca4164529b875374c410193bbbac0ee960895f Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Wed, 26 Feb 2014 21:03:05 +0800 Subject: ACPI / processor: Rework processor throttling with work_on_cpu() acpi_processor_set_throttling() uses set_cpus_allowed_ptr() to make sure that the (struct acpi_processor)->acpi_processor_set_throttling() callback will run on the right CPU. However, the function may be called from a worker thread already bound to a different CPU in which case that won't work. Make acpi_processor_set_throttling() use work_on_cpu() as appropriate instead of abusing set_cpus_allowed_ptr(). Reported-and-tested-by: Jiri Olsa Signed-off-by: Lan Tianyu Cc: All applicable [rjw: Changelog] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_throttling.c | 69 +++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 28baa05b8018..84243c32e29c 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -56,6 +56,12 @@ struct throttling_tstate { int target_state; /* target T-state */ }; +struct acpi_processor_throttling_arg { + struct acpi_processor *pr; + int target_state; + bool force; +}; + #define THROTTLING_PRECHANGE (1) #define THROTTLING_POSTCHANGE (2) @@ -1060,16 +1066,24 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, return 0; } +static long acpi_processor_throttling_fn(void *data) +{ + struct acpi_processor_throttling_arg *arg = data; + struct acpi_processor *pr = arg->pr; + + return pr->throttling.acpi_processor_set_throttling(pr, + arg->target_state, arg->force); +} + int acpi_processor_set_throttling(struct acpi_processor *pr, int state, bool force) { - cpumask_var_t saved_mask; int ret = 0; unsigned int i; struct acpi_processor *match_pr; struct acpi_processor_throttling *p_throttling; + struct acpi_processor_throttling_arg arg; struct throttling_tstate t_state; - cpumask_var_t online_throttling_cpus; if (!pr) return -EINVAL; @@ -1080,14 +1094,6 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, if ((state < 0) || (state > (pr->throttling.state_count - 1))) return -EINVAL; - if (!alloc_cpumask_var(&saved_mask, GFP_KERNEL)) - return -ENOMEM; - - if (!alloc_cpumask_var(&online_throttling_cpus, GFP_KERNEL)) { - free_cpumask_var(saved_mask); - return -ENOMEM; - } - if (cpu_is_offline(pr->id)) { /* * the cpu pointed by pr->id is offline. Unnecessary to change @@ -1096,17 +1102,15 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, return -ENODEV; } - cpumask_copy(saved_mask, ¤t->cpus_allowed); t_state.target_state = state; p_throttling = &(pr->throttling); - cpumask_and(online_throttling_cpus, cpu_online_mask, - p_throttling->shared_cpu_map); + /* * The throttling notifier will be called for every * affected cpu in order to get one proper T-state. * The notifier event is THROTTLING_PRECHANGE. */ - for_each_cpu(i, online_throttling_cpus) { + for_each_cpu_and(i, cpu_online_mask, p_throttling->shared_cpu_map) { t_state.cpu = i; acpi_processor_throttling_notifier(THROTTLING_PRECHANGE, &t_state); @@ -1118,21 +1122,18 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, * it can be called only for the cpu pointed by pr. */ if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) { - /* FIXME: use work_on_cpu() */ - if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) { - /* Can't migrate to the pr->id CPU. Exit */ - ret = -ENODEV; - goto exit; - } - ret = p_throttling->acpi_processor_set_throttling(pr, - t_state.target_state, force); + arg.pr = pr; + arg.target_state = state; + arg.force = force; + ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, &arg); } else { /* * When the T-state coordination is SW_ALL or HW_ALL, * it is necessary to set T-state for every affected * cpus. */ - for_each_cpu(i, online_throttling_cpus) { + for_each_cpu_and(i, cpu_online_mask, + p_throttling->shared_cpu_map) { match_pr = per_cpu(processors, i); /* * If the pointer is invalid, we will report the @@ -1153,13 +1154,12 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, "on CPU %d\n", i)); continue; } - t_state.cpu = i; - /* FIXME: use work_on_cpu() */ - if (set_cpus_allowed_ptr(current, cpumask_of(i))) - continue; - ret = match_pr->throttling. - acpi_processor_set_throttling( - match_pr, t_state.target_state, force); + + arg.pr = match_pr; + arg.target_state = state; + arg.force = force; + ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, + &arg); } } /* @@ -1168,17 +1168,12 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, * affected cpu to update the T-states. * The notifier event is THROTTLING_POSTCHANGE */ - for_each_cpu(i, online_throttling_cpus) { + for_each_cpu_and(i, cpu_online_mask, p_throttling->shared_cpu_map) { t_state.cpu = i; acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE, &t_state); } - /* restore the previous state */ - /* FIXME: use work_on_cpu() */ - set_cpus_allowed_ptr(current, saved_mask); -exit: - free_cpumask_var(online_throttling_cpus); - free_cpumask_var(saved_mask); + return ret; } -- cgit v1.2.3 From 6dbd46c849e071e6afc1e0cad489b0175bca9318 Mon Sep 17 00:00:00 2001 From: Joerg Dorchain Date: Fri, 21 Feb 2014 20:29:33 +0100 Subject: USB: ftdi_sio: add Cressi Leonardo PID Hello, the following patch adds an entry for the PID of a Cressi Leonardo diving computer interface to kernel 3.13.0. It is detected as FT232RL. Works with subsurface. Signed-off-by: Joerg Dorchain Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ee1f00f03c43..44ab12986805 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -907,6 +907,8 @@ static const struct usb_device_id id_table_combined[] = { /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, + /* Cressi Devices */ + { USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1e2d369df86e..e599fbfcde5f 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1320,3 +1320,9 @@ * Manufacturer: Smart GSM Team */ #define FTDI_Z3X_PID 0x0011 + +/* + * Product: Cressi PC Interface + * Manufacturer: Cressi + */ +#define FTDI_CRESSI_PID 0x87d0 -- cgit v1.2.3 From a1227f3c1030e96ebc51d677d2f636268845c5fb Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 19 Feb 2014 10:29:01 +0100 Subject: usb: ehci: fix deadlock when threadirqs option is used ehci_irq() and ehci_hrtimer_func() can deadlock on ehci->lock when threadirqs option is used. To prevent the deadlock use spin_lock_irqsave() in ehci_irq(). This change can be reverted when hrtimer callbacks become threaded. Signed-off-by: Stanislaw Gruszka Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 471142725ffe..81cda09b47e3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -685,8 +685,15 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 status, masked_status, pcd_status = 0, cmd; int bh; + unsigned long flags; - spin_lock (&ehci->lock); + /* + * For threadirqs option we use spin_lock_irqsave() variant to prevent + * deadlock with ehci hrtimer callback, because hrtimer callbacks run + * in interrupt context even when threadirqs is specified. We can go + * back to spin_lock() variant when hrtimer callbacks become threaded. + */ + spin_lock_irqsave(&ehci->lock, flags); status = ehci_readl(ehci, &ehci->regs->status); @@ -704,7 +711,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { - spin_unlock(&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); return IRQ_NONE; } @@ -815,7 +822,7 @@ dead: if (bh) ehci_work (ehci); - spin_unlock (&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); if (pcd_status) usb_hcd_poll_rh_status(hcd); return IRQ_HANDLED; -- cgit v1.2.3 From 7d48935eff401bb7970e73e822871a10e3643df1 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 12 Feb 2014 23:58:15 -0500 Subject: dm thin: allow metadata space larger than supported to go unused It was always intended that a user could provide a thin metadata device that is larger than the max supported by the on-disk format. The extra space would just go unused. Unfortunately that never worked. If the user attempted to use a larger metadata device on creation they would get an error like the following: device-mapper: space map common: space map too large device-mapper: transaction manager: couldn't create metadata space map device-mapper: thin metadata: tm_create_with_sm failed device-mapper: table: 252:17: thin-pool: Error creating metadata object device-mapper: ioctl: error adding target to table Fix this by allowing the initial metadata space map creation to cap its size at the max number of blocks supported (DM_SM_METADATA_MAX_BLOCKS). get_metadata_dev_size() must also impose DM_SM_METADATA_MAX_BLOCKS (via THIN_METADATA_MAX_SECTORS), otherwise extending metadata would cap at THIN_METADATA_MAX_SECTORS_WARNING (which is larger than supported). Also, the calculation for THIN_METADATA_MAX_SECTORS didn't account for the sizeof the disk_bitmap_header. So the supported maximum metadata size is a bit smaller (reduced from 33423360 to 33292800 sectors). Lastly, remove the "excess space will not be used" warning message from get_metadata_dev_size(); it resulted in printing the warning multiple times. Factor out warn_if_metadata_device_too_big(), call it from pool_ctr() and maybe_resize_metadata_dev(). Signed-off-by: Mike Snitzer Acked-by: Joe Thornber --- drivers/md/dm-thin-metadata.c | 4 +-- drivers/md/dm-thin-metadata.h | 8 +++--- drivers/md/dm-thin.c | 31 +++++++++++++--------- drivers/md/persistent-data/dm-space-map-metadata.c | 2 ++ drivers/md/persistent-data/dm-space-map-metadata.h | 11 ++++++++ 5 files changed, 37 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 3bb4506582a9..baa87ff12816 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -483,7 +483,7 @@ static int __write_initial_superblock(struct dm_pool_metadata *pmd) disk_super->data_mapping_root = cpu_to_le64(pmd->root); disk_super->device_details_root = cpu_to_le64(pmd->details_root); - disk_super->metadata_block_size = cpu_to_le32(THIN_METADATA_BLOCK_SIZE >> SECTOR_SHIFT); + disk_super->metadata_block_size = cpu_to_le32(THIN_METADATA_BLOCK_SIZE); disk_super->metadata_nr_blocks = cpu_to_le64(bdev_size >> SECTOR_TO_BLOCK_SHIFT); disk_super->data_block_size = cpu_to_le32(pmd->data_block_size); @@ -651,7 +651,7 @@ static int __create_persistent_data_objects(struct dm_pool_metadata *pmd, bool f { int r; - pmd->bm = dm_block_manager_create(pmd->bdev, THIN_METADATA_BLOCK_SIZE, + pmd->bm = dm_block_manager_create(pmd->bdev, THIN_METADATA_BLOCK_SIZE << SECTOR_SHIFT, THIN_METADATA_CACHE_SIZE, THIN_MAX_CONCURRENT_LOCKS); if (IS_ERR(pmd->bm)) { diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h index dd6088a17a65..82ea384d36ff 100644 --- a/drivers/md/dm-thin-metadata.h +++ b/drivers/md/dm-thin-metadata.h @@ -9,16 +9,14 @@ #include "persistent-data/dm-block-manager.h" #include "persistent-data/dm-space-map.h" +#include "persistent-data/dm-space-map-metadata.h" -#define THIN_METADATA_BLOCK_SIZE 4096 +#define THIN_METADATA_BLOCK_SIZE DM_SM_METADATA_BLOCK_SIZE /* * The metadata device is currently limited in size. - * - * We have one block of index, which can hold 255 index entries. Each - * index entry contains allocation info about 16k metadata blocks. */ -#define THIN_METADATA_MAX_SECTORS (255 * (1 << 14) * (THIN_METADATA_BLOCK_SIZE / (1 << SECTOR_SHIFT))) +#define THIN_METADATA_MAX_SECTORS DM_SM_METADATA_MAX_SECTORS /* * A metadata device larger than 16GB triggers a warning. diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 4cf4b198cb60..7e84baccf0ad 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -2000,16 +2000,27 @@ static void metadata_low_callback(void *context) dm_table_event(pool->ti->table); } -static sector_t get_metadata_dev_size(struct block_device *bdev) +static sector_t get_dev_size(struct block_device *bdev) +{ + return i_size_read(bdev->bd_inode) >> SECTOR_SHIFT; +} + +static void warn_if_metadata_device_too_big(struct block_device *bdev) { - sector_t metadata_dev_size = i_size_read(bdev->bd_inode) >> SECTOR_SHIFT; + sector_t metadata_dev_size = get_dev_size(bdev); char buffer[BDEVNAME_SIZE]; - if (metadata_dev_size > THIN_METADATA_MAX_SECTORS_WARNING) { + if (metadata_dev_size > THIN_METADATA_MAX_SECTORS_WARNING) DMWARN("Metadata device %s is larger than %u sectors: excess space will not be used.", bdevname(bdev, buffer), THIN_METADATA_MAX_SECTORS); - metadata_dev_size = THIN_METADATA_MAX_SECTORS_WARNING; - } +} + +static sector_t get_metadata_dev_size(struct block_device *bdev) +{ + sector_t metadata_dev_size = get_dev_size(bdev); + + if (metadata_dev_size > THIN_METADATA_MAX_SECTORS) + metadata_dev_size = THIN_METADATA_MAX_SECTORS; return metadata_dev_size; } @@ -2018,7 +2029,7 @@ static dm_block_t get_metadata_dev_size_in_blocks(struct block_device *bdev) { sector_t metadata_dev_size = get_metadata_dev_size(bdev); - sector_div(metadata_dev_size, THIN_METADATA_BLOCK_SIZE >> SECTOR_SHIFT); + sector_div(metadata_dev_size, THIN_METADATA_BLOCK_SIZE); return metadata_dev_size; } @@ -2096,12 +2107,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) ti->error = "Error opening metadata block device"; goto out_unlock; } - - /* - * Run for the side-effect of possibly issuing a warning if the - * device is too big. - */ - (void) get_metadata_dev_size(metadata_dev->bdev); + warn_if_metadata_device_too_big(metadata_dev->bdev); r = dm_get_device(ti, argv[1], FMODE_READ | FMODE_WRITE, &data_dev); if (r) { @@ -2288,6 +2294,7 @@ static int maybe_resize_metadata_dev(struct dm_target *ti, bool *need_commit) return -EINVAL; } else if (metadata_dev_size > sb_metadata_dev_size) { + warn_if_metadata_device_too_big(pool->md_dev); DMINFO("%s: growing the metadata device from %llu to %llu blocks", dm_device_name(pool->pool_md), sb_metadata_dev_size, metadata_dev_size); diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c index 536782e3bcb7..e9bdd462f4f5 100644 --- a/drivers/md/persistent-data/dm-space-map-metadata.c +++ b/drivers/md/persistent-data/dm-space-map-metadata.c @@ -680,6 +680,8 @@ int dm_sm_metadata_create(struct dm_space_map *sm, if (r) return r; + if (nr_blocks > DM_SM_METADATA_MAX_BLOCKS) + nr_blocks = DM_SM_METADATA_MAX_BLOCKS; r = sm_ll_extend(&smm->ll, nr_blocks); if (r) return r; diff --git a/drivers/md/persistent-data/dm-space-map-metadata.h b/drivers/md/persistent-data/dm-space-map-metadata.h index 39bba0801cf2..64df923974d8 100644 --- a/drivers/md/persistent-data/dm-space-map-metadata.h +++ b/drivers/md/persistent-data/dm-space-map-metadata.h @@ -9,6 +9,17 @@ #include "dm-transaction-manager.h" +#define DM_SM_METADATA_BLOCK_SIZE (4096 >> SECTOR_SHIFT) + +/* + * The metadata device is currently limited in size. + * + * We have one block of index, which can hold 255 index entries. Each + * index entry contains allocation info about ~16k metadata blocks. + */ +#define DM_SM_METADATA_MAX_BLOCKS (255 * ((1 << 14) - 64)) +#define DM_SM_METADATA_MAX_SECTORS (DM_SM_METADATA_MAX_BLOCKS * DM_SM_METADATA_BLOCK_SIZE) + /* * Unfortunately we have to use two-phase construction due to the cycle * between the tm and sm. -- cgit v1.2.3 From 9f050c7f9738ffa746c63415136645ad231b1348 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 20 Feb 2014 09:16:01 -0500 Subject: drm/radeon: print the supported atpx function mask Print the supported functions mask in addition to the version. This is useful in debugging PX problems since we can see what functions are available. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 485848f889f5..fa9a9c02751e 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -219,7 +219,8 @@ static int radeon_atpx_verify_interface(struct radeon_atpx *atpx) memcpy(&output, info->buffer.pointer, size); /* TODO: check version? */ - printk("ATPX version %u\n", output.version); + printk("ATPX version %u, functions 0x%08x\n", + output.version, output.function_bits); radeon_atpx_parse_functions(&atpx->functions, output.function_bits); -- cgit v1.2.3 From 5e386b574cf7e1593e1296e5b0feea4108ed6ad8 Mon Sep 17 00:00:00 2001 From: Christian König Date: Thu, 20 Feb 2014 18:47:14 +0100 Subject: drm/radeon: fix missing bo reservation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we might get a crash here. Signed-off-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_kms.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 114d1672d616..2aecd6dc2610 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -537,6 +537,10 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) radeon_vm_init(rdev, &fpriv->vm); + r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); + if (r) + return r; + /* map the ib pool buffer read only into * virtual address space */ bo_va = radeon_vm_bo_add(rdev, &fpriv->vm, @@ -544,6 +548,8 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) r = radeon_vm_bo_set_addr(rdev, bo_va, RADEON_VA_IB_OFFSET, RADEON_VM_PAGE_READABLE | RADEON_VM_PAGE_SNOOPED); + + radeon_bo_unreserve(rdev->ring_tmp_bo.bo); if (r) { radeon_vm_fini(rdev, &fpriv->vm); kfree(fpriv); -- cgit v1.2.3 From 9ef4e1d000a5b335fcebfcf8aef3405e59574c89 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 25 Feb 2014 10:21:43 -0500 Subject: drm/radeon: disable pll sharing for DP on DCE4.1 Causes display problems. We had already disabled sharing for non-DP displays. Based on a patch from: Niels Ole Salscheider bug: https://bugzilla.kernel.org/show_bug.cgi?id=58121 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 0d19f4f94d5a..daa4dd375ab1 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1774,6 +1774,20 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) return ATOM_PPLL1; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; + } else if (ASIC_IS_DCE41(rdev)) { + /* Don't share PLLs on DCE4.1 chips */ + if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) { + if (rdev->clock.dp_extclk) + /* skip PPLL programming if using ext clock */ + return ATOM_PPLL_INVALID; + } + pll_in_use = radeon_get_pll_use_mask(crtc); + if (!(pll_in_use & (1 << ATOM_PPLL1))) + return ATOM_PPLL1; + if (!(pll_in_use & (1 << ATOM_PPLL2))) + return ATOM_PPLL2; + DRM_ERROR("unable to allocate a PPLL\n"); + return ATOM_PPLL_INVALID; } else if (ASIC_IS_DCE4(rdev)) { /* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock, * depending on the asic: @@ -1801,7 +1815,7 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) if (pll != ATOM_PPLL_INVALID) return pll; } - } else if (!ASIC_IS_DCE41(rdev)) { /* Don't share PLLs on DCE4.1 chips */ + } else { /* use the same PPLL for all monitors with the same clock */ pll = radeon_get_shared_nondp_ppll(crtc); if (pll != ATOM_PPLL_INVALID) -- cgit v1.2.3 From d965441342f3b7d63db784cad852328d17d47942 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 26 Feb 2014 19:22:47 -0500 Subject: drm/radeon: free uvd ring on unload MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Need to free the uvd ring. Also reshuffle gart tear down to happen after uvd tear down. Signed-off-by: Jérôme Glisse Cc: stable@vger.kernel.org Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 2 +- drivers/gpu/drm/radeon/radeon_uvd.c | 2 ++ drivers/gpu/drm/radeon/rv770.c | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 5623e7542d99..8a2c010b7dc5 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -5475,9 +5475,9 @@ void evergreen_fini(struct radeon_device *rdev) radeon_wb_fini(rdev); radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); - evergreen_pcie_gart_fini(rdev); uvd_v1_0_fini(rdev); radeon_uvd_fini(rdev); + evergreen_pcie_gart_fini(rdev); r600_vram_scratch_fini(rdev); radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 6781fee1eaad..3e6804b2b2ef 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -171,6 +171,8 @@ void radeon_uvd_fini(struct radeon_device *rdev) radeon_bo_unref(&rdev->uvd.vcpu_bo); + radeon_ring_fini(rdev, &rdev->ring[R600_RING_TYPE_UVD_INDEX]); + release_firmware(rdev->uvd_fw); } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 6c772e58c784..4e37a42305d8 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1955,9 +1955,9 @@ void rv770_fini(struct radeon_device *rdev) radeon_wb_fini(rdev); radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); - rv770_pcie_gart_fini(rdev); uvd_v1_0_fini(rdev); radeon_uvd_fini(rdev); + rv770_pcie_gart_fini(rdev); r600_vram_scratch_fini(rdev); radeon_gem_fini(rdev); radeon_fence_driver_fini(rdev); -- cgit v1.2.3 From d7eb0a0940618f36e5937d81c06ad7bf438a99e2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Feb 2014 10:25:39 -0500 Subject: drm/radeon: fix audio disable on dce6+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Properly clear the enable bit when audio disable is requested. Signed-off-by: Alex Deucher Reviewed-by: Christian König Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/dce6_afmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeon/dce6_afmt.c index 713a5d359901..36e8f1084621 100644 --- a/drivers/gpu/drm/radeon/dce6_afmt.c +++ b/drivers/gpu/drm/radeon/dce6_afmt.c @@ -283,7 +283,7 @@ static void dce6_audio_enable(struct radeon_device *rdev, bool enable) { WREG32_ENDPOINT(pin->offset, AZ_F0_CODEC_PIN_CONTROL_HOTPLUG_CONTROL, - AUDIO_ENABLED); + enable ? AUDIO_ENABLED : 0); DRM_INFO("%s audio %d support\n", enable ? "Enabling" : "Disabling", pin->id); } -- cgit v1.2.3 From 832eafaf34ff7d0348fe701e417900c6cf1f5656 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Feb 2014 11:07:55 -0500 Subject: drm/radeon: change audio enable logic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Disable audio around audio hw setup. This may avoid hangs on certain asics. Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/dce6_afmt.c | 13 ++++++++----- drivers/gpu/drm/radeon/evergreen_hdmi.c | 26 +++++++++++++++----------- drivers/gpu/drm/radeon/r600_audio.c | 14 ++++++++------ drivers/gpu/drm/radeon/r600_hdmi.c | 12 +++++++----- drivers/gpu/drm/radeon/radeon.h | 6 ++++++ 5 files changed, 44 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeon/dce6_afmt.c index 36e8f1084621..94e858751994 100644 --- a/drivers/gpu/drm/radeon/dce6_afmt.c +++ b/drivers/gpu/drm/radeon/dce6_afmt.c @@ -278,13 +278,15 @@ static int dce6_audio_chipset_supported(struct radeon_device *rdev) return !ASIC_IS_NODCE(rdev); } -static void dce6_audio_enable(struct radeon_device *rdev, - struct r600_audio_pin *pin, - bool enable) +void dce6_audio_enable(struct radeon_device *rdev, + struct r600_audio_pin *pin, + bool enable) { + if (!pin) + return; + WREG32_ENDPOINT(pin->offset, AZ_F0_CODEC_PIN_CONTROL_HOTPLUG_CONTROL, enable ? AUDIO_ENABLED : 0); - DRM_INFO("%s audio %d support\n", enable ? "Enabling" : "Disabling", pin->id); } static const u32 pin_offsets[7] = @@ -323,7 +325,8 @@ int dce6_audio_init(struct radeon_device *rdev) rdev->audio.pin[i].connected = false; rdev->audio.pin[i].offset = pin_offsets[i]; rdev->audio.pin[i].id = i; - dce6_audio_enable(rdev, &rdev->audio.pin[i], true); + /* disable audio. it will be set up later */ + dce6_audio_enable(rdev, &rdev->audio.pin[i], false); } return 0; diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index 0c6d5cef4cf1..05b0c95813fd 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -306,6 +306,15 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode return; offset = dig->afmt->offset; + /* disable audio prior to setting up hw */ + if (ASIC_IS_DCE6(rdev)) { + dig->afmt->pin = dce6_audio_get_pin(rdev); + dce6_audio_enable(rdev, dig->afmt->pin, false); + } else { + dig->afmt->pin = r600_audio_get_pin(rdev); + r600_audio_enable(rdev, dig->afmt->pin, false); + } + evergreen_audio_set_dto(encoder, mode->clock); WREG32(HDMI_VBI_PACKET_CONTROL + offset, @@ -409,12 +418,16 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode WREG32(AFMT_RAMP_CONTROL1 + offset, 0x007FFFFF); WREG32(AFMT_RAMP_CONTROL2 + offset, 0x00000001); WREG32(AFMT_RAMP_CONTROL3 + offset, 0x00000001); + + /* enable audio after to setting up hw */ + if (ASIC_IS_DCE6(rdev)) + dce6_audio_enable(rdev, dig->afmt->pin, true); + else + r600_audio_enable(rdev, dig->afmt->pin, true); } void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable) { - struct drm_device *dev = encoder->dev; - struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; @@ -427,15 +440,6 @@ void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable) if (!enable && !dig->afmt->enabled) return; - if (enable) { - if (ASIC_IS_DCE6(rdev)) - dig->afmt->pin = dce6_audio_get_pin(rdev); - else - dig->afmt->pin = r600_audio_get_pin(rdev); - } else { - dig->afmt->pin = NULL; - } - dig->afmt->enabled = enable; DRM_DEBUG("%sabling HDMI interface @ 0x%04X for encoder 0x%x\n", diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c index 47fc2b886979..bffac10c4296 100644 --- a/drivers/gpu/drm/radeon/r600_audio.c +++ b/drivers/gpu/drm/radeon/r600_audio.c @@ -142,12 +142,15 @@ void r600_audio_update_hdmi(struct work_struct *work) } /* enable the audio stream */ -static void r600_audio_enable(struct radeon_device *rdev, - struct r600_audio_pin *pin, - bool enable) +void r600_audio_enable(struct radeon_device *rdev, + struct r600_audio_pin *pin, + bool enable) { u32 value = 0; + if (!pin) + return; + if (ASIC_IS_DCE4(rdev)) { if (enable) { value |= 0x81000000; /* Required to enable audio */ @@ -158,7 +161,6 @@ static void r600_audio_enable(struct radeon_device *rdev, WREG32_P(R600_AUDIO_ENABLE, enable ? 0x81000000 : 0x0, ~0x81000000); } - DRM_INFO("%s audio %d support\n", enable ? "Enabling" : "Disabling", pin->id); } /* @@ -178,8 +180,8 @@ int r600_audio_init(struct radeon_device *rdev) rdev->audio.pin[0].status_bits = 0; rdev->audio.pin[0].category_code = 0; rdev->audio.pin[0].id = 0; - - r600_audio_enable(rdev, &rdev->audio.pin[0], true); + /* disable audio. it will be set up later */ + r600_audio_enable(rdev, &rdev->audio.pin[0], false); return 0; } diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 3016fc14f502..ec810cd7247b 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -460,6 +460,10 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod return; offset = dig->afmt->offset; + /* disable audio prior to setting up hw */ + dig->afmt->pin = r600_audio_get_pin(rdev); + r600_audio_enable(rdev, dig->afmt->pin, false); + r600_audio_set_dto(encoder, mode->clock); WREG32(HDMI0_VBI_PACKET_CONTROL + offset, @@ -531,6 +535,9 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001); r600_hdmi_audio_workaround(encoder); + + /* enable audio after to setting up hw */ + r600_audio_enable(rdev, dig->afmt->pin, true); } /* @@ -651,11 +658,6 @@ void r600_hdmi_enable(struct drm_encoder *encoder, bool enable) if (!enable && !dig->afmt->enabled) return; - if (enable) - dig->afmt->pin = r600_audio_get_pin(rdev); - else - dig->afmt->pin = NULL; - /* Older chipsets require setting HDMI and routing manually */ if (!ASIC_IS_DCE3(rdev)) { if (enable) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 024db37b1832..e887d027b6d0 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -2747,6 +2747,12 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev, void r600_audio_update_hdmi(struct work_struct *work); struct r600_audio_pin *r600_audio_get_pin(struct radeon_device *rdev); struct r600_audio_pin *dce6_audio_get_pin(struct radeon_device *rdev); +void r600_audio_enable(struct radeon_device *rdev, + struct r600_audio_pin *pin, + bool enable); +void dce6_audio_enable(struct radeon_device *rdev, + struct r600_audio_pin *pin, + bool enable); /* * R600 vram scratch functions -- cgit v1.2.3 From 3803c8e5b50946dd6bc18972d9190757d05648f0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Feb 2014 11:12:11 -0500 Subject: drm/radeon: enable speaker allocation setup on dce3.2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that we disable audio while setting up the audio hw, we should be able to set this up without hangs. Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/r600_hdmi.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index ec810cd7247b..85a2bb28aed2 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -329,9 +329,6 @@ static void dce3_2_afmt_write_speaker_allocation(struct drm_encoder *encoder) u8 *sadb; int sad_count; - /* XXX: setting this register causes hangs on some asics */ - return; - list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) { if (connector->encoder == encoder) { radeon_connector = to_radeon_connector(connector); -- cgit v1.2.3 From e0d849fad746cb36a6822e4595d8ba9bf0adf7fa Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Thu, 27 Feb 2014 22:46:48 +0100 Subject: dm cache: fix truncation bug when mapping I/O to >2TB fast device When remapping a block to the cache's fast device that is larger than 2TB we must not truncate the destination sector to 32bits. The 32bit temporary result of from_cblock() was being overflowed in remap_to_cache() due to the logical left shift. Use an intermediate 64bit type to store the 32bit from_cblock() result to fix the overflow. Signed-off-by: Heinz Mauelshagen Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-cache-target.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index db0944465127..1af70145fab9 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -671,15 +671,16 @@ static void remap_to_cache(struct cache *cache, struct bio *bio, dm_cblock_t cblock) { sector_t bi_sector = bio->bi_iter.bi_sector; + sector_t block = from_cblock(cblock); bio->bi_bdev = cache->cache_dev->bdev; if (!block_size_is_power_of_two(cache)) bio->bi_iter.bi_sector = - (from_cblock(cblock) * cache->sectors_per_block) + + (block * cache->sectors_per_block) + sector_div(bi_sector, cache->sectors_per_block); else bio->bi_iter.bi_sector = - (from_cblock(cblock) << cache->sectors_per_block_shift) | + (block << cache->sectors_per_block_shift) | (bi_sector & (cache->sectors_per_block - 1)); } -- cgit v1.2.3 From ae2045694b3353bf2b2980817303c9e9feb8cfff Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 28 Feb 2014 13:31:04 +0100 Subject: drm/vmwgfx: Remove some unused surface formats These formats are deprecated. Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul --- drivers/gpu/drm/vmwgfx/svga3d_reg.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/svga3d_reg.h b/drivers/gpu/drm/vmwgfx/svga3d_reg.h index bb594c11605e..f58dc7dd15c5 100644 --- a/drivers/gpu/drm/vmwgfx/svga3d_reg.h +++ b/drivers/gpu/drm/vmwgfx/svga3d_reg.h @@ -261,12 +261,7 @@ typedef enum SVGA3dSurfaceFormat { /* Planar video formats. */ SVGA3D_YV12 = 121, - /* Shader constant formats. */ - SVGA3D_SURFACE_SHADERCONST_FLOAT = 122, - SVGA3D_SURFACE_SHADERCONST_INT = 123, - SVGA3D_SURFACE_SHADERCONST_BOOL = 124, - - SVGA3D_FORMAT_MAX = 125, + SVGA3D_FORMAT_MAX = 122, } SVGA3dSurfaceFormat; typedef uint32 SVGA3dColor; /* a, r, g, b */ -- cgit v1.2.3 From a34417f6be521d1027b803f0b550ce622c971f41 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 28 Feb 2014 13:33:21 +0100 Subject: drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date. Backing mob contents is propagated to user-space, so make sure backing mobs are cleared when allocated. This also accidently fix rendering errors with celestia when emulating legacy mode. Also update driver date. Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 2 +- drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 9e4be1725985..07831554dad7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -40,7 +40,7 @@ #include #include "vmwgfx_fence.h" -#define VMWGFX_DRIVER_DATE "20121114" +#define VMWGFX_DRIVER_DATE "20140228" #define VMWGFX_DRIVER_MAJOR 2 #define VMWGFX_DRIVER_MINOR 5 #define VMWGFX_DRIVER_PATCHLEVEL 0 diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 2aa4bc6a4d60..9757b57f8388 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -427,8 +427,7 @@ int vmw_dmabuf_init(struct vmw_private *dev_priv, INIT_LIST_HEAD(&vmw_bo->res_list); ret = ttm_bo_init(bdev, &vmw_bo->base, size, - (user) ? ttm_bo_type_device : - ttm_bo_type_kernel, placement, + ttm_bo_type_device, placement, 0, interruptible, NULL, acc_size, NULL, bo_free); return ret; -- cgit v1.2.3 From 6950e23e54b1c94abf8c60c1ddfac79133d41de2 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 1 Mar 2014 01:20:18 +0400 Subject: drm/vmwgfx: avoid null pointer dereference at failure paths vmw_takedown_otable_base() and vmw_mob_unbind() check for potential vmw_fifo_reserve() failure and print error message, but then immediately dereference NULL pointer. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_mob.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c index d4a5a19cb8c3..04a64b8cd3cd 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c @@ -188,18 +188,20 @@ static void vmw_takedown_otable_base(struct vmw_private *dev_priv, bo = otable->page_table->pt_bo; cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd)); - if (unlikely(cmd == NULL)) - DRM_ERROR("Failed reserving FIFO space for OTable setup.\n"); - - memset(cmd, 0, sizeof(*cmd)); - cmd->header.id = SVGA_3D_CMD_SET_OTABLE_BASE; - cmd->header.size = sizeof(cmd->body); - cmd->body.type = type; - cmd->body.baseAddress = 0; - cmd->body.sizeInBytes = 0; - cmd->body.validSizeInBytes = 0; - cmd->body.ptDepth = SVGA3D_MOBFMT_INVALID; - vmw_fifo_commit(dev_priv, sizeof(*cmd)); + if (unlikely(cmd == NULL)) { + DRM_ERROR("Failed reserving FIFO space for OTable " + "takedown.\n"); + } else { + memset(cmd, 0, sizeof(*cmd)); + cmd->header.id = SVGA_3D_CMD_SET_OTABLE_BASE; + cmd->header.size = sizeof(cmd->body); + cmd->body.type = type; + cmd->body.baseAddress = 0; + cmd->body.sizeInBytes = 0; + cmd->body.validSizeInBytes = 0; + cmd->body.ptDepth = SVGA3D_MOBFMT_INVALID; + vmw_fifo_commit(dev_priv, sizeof(*cmd)); + } if (bo) { int ret; @@ -562,11 +564,12 @@ void vmw_mob_unbind(struct vmw_private *dev_priv, if (unlikely(cmd == NULL)) { DRM_ERROR("Failed reserving FIFO space for Memory " "Object unbinding.\n"); + } else { + cmd->header.id = SVGA_3D_CMD_DESTROY_GB_MOB; + cmd->header.size = sizeof(cmd->body); + cmd->body.mobid = mob->id; + vmw_fifo_commit(dev_priv, sizeof(*cmd)); } - cmd->header.id = SVGA_3D_CMD_DESTROY_GB_MOB; - cmd->header.size = sizeof(cmd->body); - cmd->body.mobid = mob->id; - vmw_fifo_commit(dev_priv, sizeof(*cmd)); if (bo) { vmw_fence_single_bo(bo, NULL); ttm_bo_unreserve(bo); -- cgit v1.2.3