From c1ef9a6cabb34dbc09e31417b0c0a672fe0de13a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 5 Dec 2025 11:51:48 +0200 Subject: Revert "drm/atomic-helper: Re-order bridge chain pre-enable and post-disable" This reverts commit c9b1150a68d9362a0827609fc0dc1664c0d8bfe1. Changing the enable/disable sequence has caused regressions on multiple platforms: R-Car, MCDE, Rockchip. A series (see link below) was sent to fix these, but it was decided that it's better to revert the original patch and change the enable/disable sequence only in the tidss driver. Reverting this commit breaks tidss's DSI and OLDI outputs, which will be fixed in the following commits. Signed-off-by: Tomi Valkeinen Link: https://lore.kernel.org/all/20251202-mcde-drm-regression-thirdfix-v6-0-f1bffd4ec0fa%40kernel.org/ Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable") Cc: stable@vger.kernel.org # v6.17+ Reviewed-by: Aradhya Bhatia Reviewed-by: Maxime Ripard Reviewed-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-1-fda68fa1b3de@ideasonboard.com --- include/drm/drm_bridge.h | 249 +++++++++++++---------------------------------- 1 file changed, 66 insertions(+), 183 deletions(-) (limited to 'include') diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 0ff7ab4aa868..dbafe136833f 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -176,33 +176,17 @@ struct drm_bridge_funcs { /** * @disable: * - * The @disable callback should disable the bridge. + * This callback should disable the bridge. It is called right before + * the preceding element in the display pipe is disabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @disable vfunc. If the preceding element is a &drm_encoder + * it's called right before the &drm_encoder_helper_funcs.disable, + * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms + * hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. * - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is disabled via one of: - * - * - &drm_bridge_funcs.disable - * - &drm_bridge_funcs.atomic_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms. - * * The @disable callback is optional. * * NOTE: @@ -215,34 +199,17 @@ struct drm_bridge_funcs { /** * @post_disable: * - * The bridge must assume that the display pipe (i.e. clocks and timing - * signals) feeding this bridge is no longer running when the - * @post_disable is called. + * This callback should disable the bridge. It is called right after the + * preceding element in the display pipe is disabled. If the preceding + * element is a bridge this means it's called after that bridge's + * @post_disable function. If the preceding element is a &drm_encoder + * it's called right after the encoder's + * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare + * or &drm_encoder_helper_funcs.dpms hook. * - * This callback should perform all the actions required by the hardware - * after it has stopped receiving signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is post-disabled (unless marked otherwise by the - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.post_disable - * - &drm_bridge_funcs.atomic_post_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms + * The bridge must assume that the display pipe (i.e. clocks and timing + * signals) feeding it is no longer running when this callback is + * called. * * The @post_disable callback is optional. * @@ -285,30 +252,18 @@ struct drm_bridge_funcs { /** * @pre_enable: * - * The display pipe (i.e. clocks and timing signals) feeding this bridge - * will not yet be running when the @pre_enable is called. - * - * This callback should perform all the necessary actions to prepare the - * bridge to accept signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is pre-enabled (unless marked otherwise by - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.pre_enable - * - &drm_bridge_funcs.atomic_pre_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: + * This callback should enable the bridge. It is called right before + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @pre_enable function. If the preceding element is a + * &drm_encoder it's called right before the encoder's + * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or + * &drm_encoder_helper_funcs.dpms hook. * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - &drm_encoder_helper_funcs.commit + * The display pipe (i.e. clocks and timing signals) feeding this bridge + * will not yet be running when this callback is called. The bridge must + * not enable the display link feeding the next bridge in the chain (if + * there is one) when this callback is called. * * The @pre_enable callback is optional. * @@ -322,31 +277,19 @@ struct drm_bridge_funcs { /** * @enable: * - * The @enable callback should enable the bridge. + * This callback should enable the bridge. It is called right after + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called after that + * bridge's @enable function. If the preceding element is a + * &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or + * &drm_encoder_helper_funcs.dpms hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is running when this callback is called. This * callback must enable the display link feeding the next bridge in the * chain if there is one. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is enabled via one of: - * - * - &drm_bridge_funcs.enable - * - &drm_bridge_funcs.atomic_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - drm_encoder_helper_funcs.commit - * * The @enable callback is optional. * * NOTE: @@ -359,30 +302,17 @@ struct drm_bridge_funcs { /** * @atomic_pre_enable: * - * The display pipe (i.e. clocks and timing signals) feeding this bridge - * will not yet be running when the @atomic_pre_enable is called. - * - * This callback should perform all the necessary actions to prepare the - * bridge to accept signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is pre-enabled (unless marked otherwise by - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.pre_enable - * - &drm_bridge_funcs.atomic_pre_enable + * This callback should enable the bridge. It is called right before + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @atomic_pre_enable or @pre_enable function. If the preceding + * element is a &drm_encoder it's called right before the encoder's + * &drm_encoder_helper_funcs.atomic_enable hook. * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - &drm_encoder_helper_funcs.commit + * The display pipe (i.e. clocks and timing signals) feeding this bridge + * will not yet be running when this callback is called. The bridge must + * not enable the display link feeding the next bridge in the chain (if + * there is one) when this callback is called. * * The @atomic_pre_enable callback is optional. */ @@ -392,31 +322,18 @@ struct drm_bridge_funcs { /** * @atomic_enable: * - * The @atomic_enable callback should enable the bridge. + * This callback should enable the bridge. It is called right after + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called after that + * bridge's @atomic_enable or @enable function. If the preceding element + * is a &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.atomic_enable hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is running when this callback is called. This * callback must enable the display link feeding the next bridge in the * chain if there is one. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is enabled via one of: - * - * - &drm_bridge_funcs.enable - * - &drm_bridge_funcs.atomic_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - drm_encoder_helper_funcs.commit - * * The @atomic_enable callback is optional. */ void (*atomic_enable)(struct drm_bridge *bridge, @@ -424,32 +341,16 @@ struct drm_bridge_funcs { /** * @atomic_disable: * - * The @atomic_disable callback should disable the bridge. + * This callback should disable the bridge. It is called right before + * the preceding element in the display pipe is disabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @atomic_disable or @disable vfunc. If the preceding element + * is a &drm_encoder it's called right before the + * &drm_encoder_helper_funcs.atomic_disable hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is disabled via one of: - * - * - &drm_bridge_funcs.disable - * - &drm_bridge_funcs.atomic_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms. - * * The @atomic_disable callback is optional. */ void (*atomic_disable)(struct drm_bridge *bridge, @@ -458,34 +359,16 @@ struct drm_bridge_funcs { /** * @atomic_post_disable: * - * The bridge must assume that the display pipe (i.e. clocks and timing - * signals) feeding this bridge is no longer running when the - * @atomic_post_disable is called. - * - * This callback should perform all the actions required by the hardware - * after it has stopped receiving signals from the preceding element. + * This callback should disable the bridge. It is called right after the + * preceding element in the display pipe is disabled. If the preceding + * element is a bridge this means it's called after that bridge's + * @atomic_post_disable or @post_disable function. If the preceding + * element is a &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.atomic_disable hook. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is post-disabled (unless marked otherwise by the - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.post_disable - * - &drm_bridge_funcs.atomic_post_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms + * The bridge must assume that the display pipe (i.e. clocks and timing + * signals) feeding it is no longer running when this callback is + * called. * * The @atomic_post_disable callback is optional. */ -- cgit v1.2.3 From d1c7dc57ff2400b141e6582a8d2dc5170108cf81 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 5 Dec 2025 11:51:50 +0200 Subject: drm/atomic-helper: Export and namespace some functions Export and namespace those not prefixed with drm_* so it becomes possible to write custom commit tail functions in individual drivers using the helper infrastructure. Tested-by: Marek Vasut Reviewed-by: Maxime Ripard Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org # v6.17+ Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable") Reviewed-by: Aradhya Bhatia Reviewed-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-3-fda68fa1b3de@ideasonboard.com --- drivers/gpu/drm/drm_atomic_helper.c | 122 +++++++++++++++++++++++++++++------- include/drm/drm_atomic_helper.h | 22 +++++++ 2 files changed, 121 insertions(+), 23 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index ef97f37560b2..5beea645035f 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1162,8 +1162,18 @@ crtc_needs_disable(struct drm_crtc_state *old_state, new_state->self_refresh_active; } -static void -encoder_bridge_disable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_disable - disable bridges and encoder + * @dev: DRM device + * @state: the driver state object + * + * Loops over all connectors in the current state and if the CRTC needs + * it, disables the bridge chain all the way, then disables the encoder + * afterwards. + */ +void +drm_atomic_helper_commit_encoder_bridge_disable(struct drm_device *dev, + struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *old_conn_state, *new_conn_state; @@ -1229,9 +1239,18 @@ encoder_bridge_disable(struct drm_device *dev, struct drm_atomic_state *state) } } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_disable); -static void -crtc_disable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_crtc_disable - disable CRTSs + * @dev: DRM device + * @state: the driver state object + * + * Loops over all CRTCs in the current state and if the CRTC needs + * it, disables it. + */ +void +drm_atomic_helper_commit_crtc_disable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; @@ -1282,9 +1301,18 @@ crtc_disable(struct drm_device *dev, struct drm_atomic_state *state) drm_crtc_vblank_put(crtc); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_crtc_disable); -static void -encoder_bridge_post_disable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_post_disable - post-disable encoder bridges + * @dev: DRM device + * @state: the driver state object + * + * Loops over all connectors in the current state and if the CRTC needs + * it, post-disables all encoder bridges. + */ +void +drm_atomic_helper_commit_encoder_bridge_post_disable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *old_conn_state, *new_conn_state; @@ -1335,15 +1363,16 @@ encoder_bridge_post_disable(struct drm_device *dev, struct drm_atomic_state *sta drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_post_disable); static void disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { - encoder_bridge_disable(dev, state); + drm_atomic_helper_commit_encoder_bridge_disable(dev, state); - encoder_bridge_post_disable(dev, state); + drm_atomic_helper_commit_encoder_bridge_post_disable(dev, state); - crtc_disable(dev, state); + drm_atomic_helper_commit_crtc_disable(dev, state); } /** @@ -1446,8 +1475,17 @@ void drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *stat } EXPORT_SYMBOL(drm_atomic_helper_calc_timestamping_constants); -static void -crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_crtc_set_mode - set the new mode + * @dev: DRM device + * @state: the driver state object + * + * Loops over all connectors in the current state and if the mode has + * changed, change the mode of the CRTC, then call down the bridge + * chain and change the mode in all bridges as well. + */ +void +drm_atomic_helper_commit_crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; @@ -1508,6 +1546,7 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *state) drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_crtc_set_mode); /** * drm_atomic_helper_commit_modeset_disables - modeset commit to disable outputs @@ -1531,12 +1570,21 @@ void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, drm_atomic_helper_update_legacy_modeset_state(dev, state); drm_atomic_helper_calc_timestamping_constants(state); - crtc_set_mode(dev, state); + drm_atomic_helper_commit_crtc_set_mode(dev, state); } EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables); -static void drm_atomic_helper_commit_writebacks(struct drm_device *dev, - struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_writebacks - issue writebacks + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over the connectors, checks if the new state requires + * a writeback job to be issued and in that case issues an atomic + * commit on each connector. + */ +void drm_atomic_helper_commit_writebacks(struct drm_device *dev, + struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; @@ -1555,9 +1603,18 @@ static void drm_atomic_helper_commit_writebacks(struct drm_device *dev, } } } +EXPORT_SYMBOL(drm_atomic_helper_commit_writebacks); -static void -encoder_bridge_pre_enable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_pre_enable - pre-enable bridges + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over the connectors and if the CRTC needs it, pre-enables + * the entire bridge chain. + */ +void +drm_atomic_helper_commit_encoder_bridge_pre_enable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; @@ -1588,9 +1645,18 @@ encoder_bridge_pre_enable(struct drm_device *dev, struct drm_atomic_state *state drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_pre_enable); -static void -crtc_enable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_crtc_enable - enables the CRTCs + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over CRTCs in the new state, and of the CRTC needs + * it, enables it. + */ +void +drm_atomic_helper_commit_crtc_enable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; @@ -1619,9 +1685,18 @@ crtc_enable(struct drm_device *dev, struct drm_atomic_state *state) } } } +EXPORT_SYMBOL(drm_atomic_helper_commit_crtc_enable); -static void -encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_enable - enables the bridges + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over all connectors in the new state, and of the CRTC needs + * it, enables the entire bridge chain. + */ +void +drm_atomic_helper_commit_encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; @@ -1664,6 +1739,7 @@ encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_enable); /** * drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs @@ -1682,11 +1758,11 @@ encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { - crtc_enable(dev, state); + drm_atomic_helper_commit_crtc_enable(dev, state); - encoder_bridge_pre_enable(dev, state); + drm_atomic_helper_commit_encoder_bridge_pre_enable(dev, state); - encoder_bridge_enable(dev, state); + drm_atomic_helper_commit_encoder_bridge_enable(dev, state); drm_atomic_helper_commit_writebacks(dev, state); } diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 53382fe93537..e154ee4f0696 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -60,6 +60,12 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, int drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_atomic_state *state); int drm_atomic_helper_check_crtc_primary_plane(struct drm_crtc_state *crtc_state); +void drm_atomic_helper_commit_encoder_bridge_disable(struct drm_device *dev, + struct drm_atomic_state *state); +void drm_atomic_helper_commit_crtc_disable(struct drm_device *dev, + struct drm_atomic_state *state); +void drm_atomic_helper_commit_encoder_bridge_post_disable(struct drm_device *dev, + struct drm_atomic_state *state); int drm_atomic_helper_check(struct drm_device *dev, struct drm_atomic_state *state); void drm_atomic_helper_commit_tail(struct drm_atomic_state *state); @@ -89,8 +95,24 @@ drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev, void drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *state); +void drm_atomic_helper_commit_crtc_set_mode(struct drm_device *dev, + struct drm_atomic_state *state); + void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, struct drm_atomic_state *state); + +void drm_atomic_helper_commit_writebacks(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_encoder_bridge_pre_enable(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_crtc_enable(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_encoder_bridge_enable(struct drm_device *dev, + struct drm_atomic_state *state); + void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *old_state); -- cgit v1.2.3