From 94c65fbf1e09a35492717cf63bf1d58991699418 Mon Sep 17 00:00:00 2001 From: Peter De Schrijver Date: Thu, 22 Aug 2013 15:19:30 +0300 Subject: ARM: tegra114: add missing clocks to binding commit 992bb598f690542a2f539fd12a42b960b7692025 forgot to move dfll_soc and dfll_ref to include/dt-bindings/clock/tegra114-car.h. Add them again in this patch as TEGRA114_CLK_DFLL_SOC and TEGRA114_CLK_DFLL_REF. Signed-off-by: Peter De Schrijver --- include/dt-bindings/clock/tegra114-car.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index 614aec417902..5d4b90a2c023 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -289,8 +289,8 @@ #define TEGRA114_CLK_PCLK 261 #define TEGRA114_CLK_CCLK_G 262 #define TEGRA114_CLK_CCLK_LP 263 -/* 264 */ -/* 265 */ +#define TEGRA114_CLK_DFLL_REF 264 +#define TEGRA114_CLK_DFLL_SOC 265 /* 266 */ /* 267 */ /* 268 */ -- cgit v1.2.3 From f67a8d21e63876a79f9f94b734049e789d594c7b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 2 Oct 2013 23:12:40 +0200 Subject: clk: tegra114: Rename gr_2d/gr_3d to gr2d/gr3d These clocks were named gr2d and gr3d on Tegra20 and Tegra30, so use the same names on Tegra114 for consistency. Signed-off-by: Thierry Reding Acked-by: Stephen Warren --- drivers/clk/tegra/clk-tegra114.c | 8 ++++---- include/dt-bindings/clock/tegra114-car.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index 9b8c938477de..2471742d68de 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -1846,8 +1846,8 @@ static struct tegra_periph_init_data tegra_periph_clk_list[] = { TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, TEGRA114_CLK_UARTB), TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, TEGRA114_CLK_UARTC), TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, TEGRA114_CLK_UARTD), - TEGRA_INIT_DATA_INT8("3d", NULL, "3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, &periph_l_regs, 0, TEGRA114_CLK_GR_3D), - TEGRA_INIT_DATA_INT8("2d", NULL, "2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, &periph_l_regs, 0, TEGRA114_CLK_GR_2D), + TEGRA_INIT_DATA_INT8("3d", NULL, "3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, &periph_l_regs, 0, TEGRA114_CLK_GR3D), + TEGRA_INIT_DATA_INT8("2d", NULL, "2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, &periph_l_regs, 0, TEGRA114_CLK_GR2D), TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, TEGRA114_CLK_VI_SENSOR), TEGRA_INIT_DATA_INT8("vi", "vi", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, &periph_l_regs, 0, TEGRA114_CLK_VI), TEGRA_INIT_DATA_INT8("epp", NULL, "epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, TEGRA114_CLK_EPP), @@ -2186,8 +2186,8 @@ static struct tegra_clk_init_table init_table[] __initdata = { {TEGRA114_CLK_HOST1X, TEGRA114_CLK_PLL_P, 136000000, 0}, {TEGRA114_CLK_DFLL_SOC, TEGRA114_CLK_PLL_P, 51000000, 1}, {TEGRA114_CLK_DFLL_REF, TEGRA114_CLK_PLL_P, 51000000, 1}, - {TEGRA114_CLK_GR_2D, TEGRA114_CLK_PLL_C2, 300000000, 0}, - {TEGRA114_CLK_GR_3D, TEGRA114_CLK_PLL_C2, 300000000, 0}, + {TEGRA114_CLK_GR2D, TEGRA114_CLK_PLL_C2, 300000000, 0}, + {TEGRA114_CLK_GR3D, TEGRA114_CLK_PLL_C2, 300000000, 0}, /* This MUST be the last entry. */ {TEGRA114_CLK_CLK_MAX, TEGRA114_CLK_CLK_MAX, 0, 0}, diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index 5d4b90a2c023..6d0d8d8ef31e 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -37,10 +37,10 @@ #define TEGRA114_CLK_I2S2 18 #define TEGRA114_CLK_EPP 19 /* 20 (register bit affects vi and vi_sensor) */ -#define TEGRA114_CLK_GR_2D 21 +#define TEGRA114_CLK_GR2D 21 #define TEGRA114_CLK_USBD 22 #define TEGRA114_CLK_ISP 23 -#define TEGRA114_CLK_GR_3D 24 +#define TEGRA114_CLK_GR3D 24 /* 25 */ #define TEGRA114_CLK_DISP2 26 #define TEGRA114_CLK_DISP1 27 -- cgit v1.2.3 From 480fe6f4cb35d1a3bd14c41736924a97f28346bb Mon Sep 17 00:00:00 2001 From: Peter De Schrijver Date: Fri, 11 Oct 2013 16:52:14 +0300 Subject: ARM: tegra30: add missing CLK IDs The Tegra30 clock bindings lack few IDs for audio and clk_out muxes. Signed-off-by: Peter De Schrijver --- include/dt-bindings/clock/tegra30-car.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h index e40fae8f9a8d..22445820a929 100644 --- a/include/dt-bindings/clock/tegra30-car.h +++ b/include/dt-bindings/clock/tegra30-car.h @@ -260,6 +260,14 @@ /* 298 */ /* 299 */ #define TEGRA30_CLK_CLK_OUT_1_MUX 300 -#define TEGRA30_CLK_CLK_MAX 301 +#define TEGRA30_CLK_CLK_OUT_2_MUX 301 +#define TEGRA30_CLK_CLK_OUT_3_MUX 302 +#define TEGRA30_CLK_AUDIO0_MUX 303 +#define TEGRA30_CLK_AUDIO1_MUX 304 +#define TEGRA30_CLK_AUDIO2_MUX 305 +#define TEGRA30_CLK_AUDIO3_MUX 306 +#define TEGRA30_CLK_AUDIO4_MUX 307 +#define TEGRA30_CLK_SPDIF_MUX 308 +#define TEGRA30_CLK_CLK_MAX 309 #endif /* _DT_BINDINGS_CLOCK_TEGRA30_CAR_H */ -- cgit v1.2.3 From 76da314df603a08ebc463853030752251b260ab8 Mon Sep 17 00:00:00 2001 From: Peter De Schrijver Date: Mon, 9 Sep 2013 13:23:56 +0300 Subject: clk: tegra124: Add support for Tegra124 clocks Implement clock support for Tegra124. Signed-off-by: Peter De Schrijver --- .../bindings/clock/nvidia,tegra124-car.txt | 59 + drivers/clk/tegra/Makefile | 1 + drivers/clk/tegra/clk-tegra124.c | 1370 ++++++++++++++++++++ include/dt-bindings/clock/tegra124-car.h | 341 +++++ 4 files changed, 1771 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt create mode 100644 drivers/clk/tegra/clk-tegra124.c create mode 100644 include/dt-bindings/clock/tegra124-car.h (limited to 'include') diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt new file mode 100644 index 000000000000..1a91ec60dee5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt @@ -0,0 +1,59 @@ +NVIDIA Tegra124 Clock And Reset Controller + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The CAR (Clock And Reset) Controller on Tegra is the HW module responsible +for muxing and gating Tegra's clocks, and setting their rates. + +Required properties : +- compatible : Should be "nvidia,tegra124-car" +- reg : Should contain CAR registers location and length +- clocks : Should contain phandle and clock specifiers for two clocks: + the 32 KHz "32k_in", and the board-specific oscillator "osc". +- #clock-cells : Should be 1. + In clock consumers, this cell represents the clock ID exposed by the + CAR. The assignments may be found in header file + . + +Example SoC include file: + +/ { + tegra_car: clock { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + + usb@c5004000 { + clocks = <&tegra_car TEGRA124_CLK_USB2>; + }; +}; + +Example board file: + +/ { + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + osc: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <112400000>; + }; + + clk_32k: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + &tegra_car { + clocks = <&clk_32k> <&osc>; + }; +}; diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index 2d837411dfed..f7dfb72884a4 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -14,3 +14,4 @@ obj-y += clk-tegra-super-gen4.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o +obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124.o diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c new file mode 100644 index 000000000000..f69367a14777 --- /dev/null +++ b/drivers/clk/tegra/clk-tegra124.c @@ -0,0 +1,1370 @@ +/* + * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clk.h" +#include "clk-id.h" + +#define CLK_SOURCE_EMC 0x19c +#define CLK_SOURCE_XUSB_SS_SRC 0x610 + +#define PLLC_BASE 0x80 +#define PLLC_OUT 0x84 +#define PLLC_MISC2 0x88 +#define PLLC_MISC 0x8c +#define PLLC2_BASE 0x4e8 +#define PLLC2_MISC 0x4ec +#define PLLC3_BASE 0x4fc +#define PLLC3_MISC 0x500 +#define PLLM_BASE 0x90 +#define PLLM_OUT 0x94 +#define PLLM_MISC 0x9c +#define PLLP_BASE 0xa0 +#define PLLP_MISC 0xac +#define PLLA_BASE 0xb0 +#define PLLA_MISC 0xbc +#define PLLD_BASE 0xd0 +#define PLLD_MISC 0xdc +#define PLLU_BASE 0xc0 +#define PLLU_MISC 0xcc +#define PLLX_BASE 0xe0 +#define PLLX_MISC 0xe4 +#define PLLX_MISC2 0x514 +#define PLLX_MISC3 0x518 +#define PLLE_BASE 0xe8 +#define PLLE_MISC 0xec +#define PLLD2_BASE 0x4b8 +#define PLLD2_MISC 0x4bc +#define PLLE_AUX 0x48c +#define PLLRE_BASE 0x4c4 +#define PLLRE_MISC 0x4c8 +#define PLLDP_BASE 0x590 +#define PLLDP_MISC 0x594 +#define PLLC4_BASE 0x5a4 +#define PLLC4_MISC 0x5a8 + +#define PLLC_IDDQ_BIT 26 +#define PLLRE_IDDQ_BIT 16 +#define PLLSS_IDDQ_BIT 19 + +#define PLL_BASE_LOCK BIT(27) +#define PLLE_MISC_LOCK BIT(11) +#define PLLRE_MISC_LOCK BIT(24) + +#define PLL_MISC_LOCK_ENABLE 18 +#define PLLC_MISC_LOCK_ENABLE 24 +#define PLLDU_MISC_LOCK_ENABLE 22 +#define PLLE_MISC_LOCK_ENABLE 9 +#define PLLRE_MISC_LOCK_ENABLE 30 +#define PLLSS_MISC_LOCK_ENABLE 30 + +#define PLLXC_SW_MAX_P 6 + +#define PMC_PLLM_WB0_OVERRIDE 0x1dc +#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 + +#define UTMIP_PLL_CFG2 0x488 +#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) +#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) + +#define UTMIP_PLL_CFG1 0x484 +#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) +#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) +#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) + +#define UTMIPLL_HW_PWRDN_CFG0 0x52c +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) +#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) +#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) + +static void __iomem *clk_base; +static void __iomem *pmc_base; + +static unsigned long osc_freq; +static unsigned long pll_ref_freq; + +static DEFINE_SPINLOCK(pll_d_lock); +static DEFINE_SPINLOCK(pll_d2_lock); +static DEFINE_SPINLOCK(pll_e_lock); +static DEFINE_SPINLOCK(pll_re_lock); +static DEFINE_SPINLOCK(pll_u_lock); + +/* possible OSC frequencies in Hz */ +static unsigned long tegra124_input_freq[] = { + [0] = 13000000, + [1] = 16800000, + [4] = 19200000, + [5] = 38400000, + [8] = 12000000, + [9] = 48000000, + [12] = 260000000, +}; + +static const char *mux_plld_out0_plld2_out0[] = { + "pll_d_out0", "pll_d2_out0", +}; +#define mux_plld_out0_plld2_out0_idx NULL + +static const char *mux_pllmcp_clkm[] = { + "pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_c2", "pll_c3", +}; +#define mux_pllmcp_clkm_idx NULL + +static struct div_nmp pllxc_nmp = { + .divm_shift = 0, + .divm_width = 8, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 20, + .divp_width = 4, +}; + +static struct pdiv_map pllxc_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 3, .hw_val = 2 }, + { .pdiv = 4, .hw_val = 3 }, + { .pdiv = 5, .hw_val = 4 }, + { .pdiv = 6, .hw_val = 5 }, + { .pdiv = 8, .hw_val = 6 }, + { .pdiv = 10, .hw_val = 7 }, + { .pdiv = 12, .hw_val = 8 }, + { .pdiv = 16, .hw_val = 9 }, + { .pdiv = 12, .hw_val = 10 }, + { .pdiv = 16, .hw_val = 11 }, + { .pdiv = 20, .hw_val = 12 }, + { .pdiv = 24, .hw_val = 13 }, + { .pdiv = 32, .hw_val = 14 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { + /* 1 GHz */ + {12000000, 1000000000, 83, 0, 1}, /* actual: 996.0 MHz */ + {13000000, 1000000000, 76, 0, 1}, /* actual: 988.0 MHz */ + {16800000, 1000000000, 59, 0, 1}, /* actual: 991.2 MHz */ + {19200000, 1000000000, 52, 0, 1}, /* actual: 998.4 MHz */ + {26000000, 1000000000, 76, 1, 1}, /* actual: 988.0 MHz */ + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_x_params = { + .input_min = 12000000, + .input_max = 800000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 700000000, + .vco_max = 3000000000UL, + .base_reg = PLLX_BASE, + .misc_reg = PLLX_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLX_MISC3, + .iddq_bit_idx = 3, + .max_p = 6, + .dyn_ramp_reg = PLLX_MISC2, + .stepa_shift = 16, + .stepb_shift = 24, + .pdiv_tohw = pllxc_p, + .div_nmp = &pllxc_nmp, + .freq_table = pll_x_freq_table, + .flags = TEGRA_PLL_USE_LOCK, +}; + +static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { + { 12000000, 624000000, 104, 1, 2}, + { 12000000, 600000000, 100, 1, 2}, + { 13000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */ + { 16800000, 600000000, 71, 1, 2}, /* actual: 596.4 MHz */ + { 19200000, 600000000, 62, 1, 2}, /* actual: 595.2 MHz */ + { 26000000, 600000000, 92, 2, 2}, /* actual: 598.0 MHz */ + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct tegra_clk_pll_params pll_c_params = { + .input_min = 12000000, + .input_max = 800000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 600000000, + .vco_max = 1400000000, + .base_reg = PLLC_BASE, + .misc_reg = PLLC_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLC_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLC_MISC, + .iddq_bit_idx = PLLC_IDDQ_BIT, + .max_p = PLLXC_SW_MAX_P, + .dyn_ramp_reg = PLLC_MISC2, + .stepa_shift = 17, + .stepb_shift = 9, + .pdiv_tohw = pllxc_p, + .div_nmp = &pllxc_nmp, + .freq_table = pll_c_freq_table, + .flags = TEGRA_PLL_USE_LOCK, +}; + +static struct div_nmp pllcx_nmp = { + .divm_shift = 0, + .divm_width = 2, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 20, + .divp_width = 3, +}; + +static struct pdiv_map pllc_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 3, .hw_val = 2 }, + { .pdiv = 4, .hw_val = 3 }, + { .pdiv = 6, .hw_val = 4 }, + { .pdiv = 8, .hw_val = 5 }, + { .pdiv = 12, .hw_val = 6 }, + { .pdiv = 16, .hw_val = 7 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = { + {12000000, 600000000, 100, 1, 2}, + {13000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */ + {16800000, 600000000, 71, 1, 2}, /* actual: 596.4 MHz */ + {19200000, 600000000, 62, 1, 2}, /* actual: 595.2 MHz */ + {26000000, 600000000, 92, 2, 2}, /* actual: 598.0 MHz */ + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_c2_params = { + .input_min = 12000000, + .input_max = 48000000, + .cf_min = 12000000, + .cf_max = 19200000, + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLC2_BASE, + .misc_reg = PLLC2_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .pdiv_tohw = pllc_p, + .div_nmp = &pllcx_nmp, + .max_p = 7, + .ext_misc_reg[0] = 0x4f0, + .ext_misc_reg[1] = 0x4f4, + .ext_misc_reg[2] = 0x4f8, + .freq_table = pll_cx_freq_table, + .flags = TEGRA_PLL_USE_LOCK, +}; + +static struct tegra_clk_pll_params pll_c3_params = { + .input_min = 12000000, + .input_max = 48000000, + .cf_min = 12000000, + .cf_max = 19200000, + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLC3_BASE, + .misc_reg = PLLC3_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .pdiv_tohw = pllc_p, + .div_nmp = &pllcx_nmp, + .max_p = 7, + .ext_misc_reg[0] = 0x504, + .ext_misc_reg[1] = 0x508, + .ext_misc_reg[2] = 0x50c, + .freq_table = pll_cx_freq_table, + .flags = TEGRA_PLL_USE_LOCK, +}; + +static struct div_nmp pllss_nmp = { + .divm_shift = 0, + .divm_width = 8, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 20, + .divp_width = 4, +}; + +static struct pdiv_map pll12g_ssd_esd_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 3, .hw_val = 2 }, + { .pdiv = 4, .hw_val = 3 }, + { .pdiv = 5, .hw_val = 4 }, + { .pdiv = 6, .hw_val = 5 }, + { .pdiv = 8, .hw_val = 6 }, + { .pdiv = 10, .hw_val = 7 }, + { .pdiv = 12, .hw_val = 8 }, + { .pdiv = 16, .hw_val = 9 }, + { .pdiv = 12, .hw_val = 10 }, + { .pdiv = 16, .hw_val = 11 }, + { .pdiv = 20, .hw_val = 12 }, + { .pdiv = 24, .hw_val = 13 }, + { .pdiv = 32, .hw_val = 14 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_c4_freq_table[] = { + { 12000000, 600000000, 100, 1, 1}, + { 13000000, 600000000, 92, 1, 1}, /* actual: 598.0 MHz */ + { 16800000, 600000000, 71, 1, 1}, /* actual: 596.4 MHz */ + { 19200000, 600000000, 62, 1, 1}, /* actual: 595.2 MHz */ + { 26000000, 600000000, 92, 2, 1}, /* actual: 598.0 MHz */ + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct tegra_clk_pll_params pll_c4_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */ + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLC4_BASE, + .misc_reg = PLLC4_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLC4_BASE, + .iddq_bit_idx = PLLSS_IDDQ_BIT, + .pdiv_tohw = pll12g_ssd_esd_p, + .div_nmp = &pllss_nmp, + .ext_misc_reg[0] = 0x5ac, + .ext_misc_reg[1] = 0x5b0, + .ext_misc_reg[2] = 0x5b4, + .freq_table = pll_c4_freq_table, +}; + +static struct pdiv_map pllm_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { + {12000000, 800000000, 66, 1, 1}, /* actual: 792.0 MHz */ + {13000000, 800000000, 61, 1, 1}, /* actual: 793.0 MHz */ + {16800000, 800000000, 47, 1, 1}, /* actual: 789.6 MHz */ + {19200000, 800000000, 41, 1, 1}, /* actual: 787.2 MHz */ + {26000000, 800000000, 61, 2, 1}, /* actual: 793.0 MHz */ + {0, 0, 0, 0, 0, 0}, +}; + +static struct div_nmp pllm_nmp = { + .divm_shift = 0, + .divm_width = 8, + .override_divm_shift = 0, + .divn_shift = 8, + .divn_width = 8, + .override_divn_shift = 8, + .divp_shift = 20, + .divp_width = 1, + .override_divp_shift = 27, +}; + +static struct tegra_clk_pll_params pll_m_params = { + .input_min = 12000000, + .input_max = 500000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 400000000, + .vco_max = 1066000000, + .base_reg = PLLM_BASE, + .misc_reg = PLLM_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .max_p = 2, + .pdiv_tohw = pllm_p, + .div_nmp = &pllm_nmp, + .pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE, + .pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE_2, + .freq_table = pll_m_freq_table, + .flags = TEGRA_PLL_USE_LOCK, +}; + +static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { + /* PLLE special case: use cpcon field to store cml divider value */ + {336000000, 100000000, 100, 21, 16, 11}, + {312000000, 100000000, 200, 26, 24, 13}, + {13000000, 100000000, 200, 1, 26, 13}, + {12000000, 100000000, 200, 1, 24, 13}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct div_nmp plle_nmp = { + .divm_shift = 0, + .divm_width = 8, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 24, + .divp_width = 4, +}; + +static struct tegra_clk_pll_params pll_e_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 75000000, + .vco_min = 1600000000, + .vco_max = 2400000000U, + .base_reg = PLLE_BASE, + .misc_reg = PLLE_MISC, + .aux_reg = PLLE_AUX, + .lock_mask = PLLE_MISC_LOCK, + .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, + .lock_delay = 300, + .div_nmp = &plle_nmp, + .freq_table = pll_e_freq_table, + .flags = TEGRA_PLL_FIXED, + .fixed_rate = 100000000, +}; + +static const struct clk_div_table pll_re_div_table[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 4, .div = 5 }, + { .val = 5, .div = 6 }, + { .val = 0, .div = 0 }, +}; + +static struct div_nmp pllre_nmp = { + .divm_shift = 0, + .divm_width = 8, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 16, + .divp_width = 4, +}; + +static struct tegra_clk_pll_params pll_re_vco_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */ + .vco_min = 300000000, + .vco_max = 600000000, + .base_reg = PLLRE_BASE, + .misc_reg = PLLRE_MISC, + .lock_mask = PLLRE_MISC_LOCK, + .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLRE_MISC, + .iddq_bit_idx = PLLRE_IDDQ_BIT, + .div_nmp = &pllre_nmp, + .flags = TEGRA_PLL_USE_LOCK, +}; + +static struct div_nmp pllp_nmp = { + .divm_shift = 0, + .divm_width = 5, + .divn_shift = 8, + .divn_width = 10, + .divp_shift = 20, + .divp_width = 3, +}; + +static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { + {12000000, 216000000, 432, 12, 1, 8}, + {13000000, 216000000, 432, 13, 1, 8}, + {16800000, 216000000, 360, 14, 1, 8}, + {19200000, 216000000, 360, 16, 1, 8}, + {26000000, 216000000, 432, 26, 1, 8}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_p_params = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 200000000, + .vco_max = 700000000, + .base_reg = PLLP_BASE, + .misc_reg = PLLP_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .div_nmp = &pllp_nmp, + .freq_table = pll_p_freq_table, + .fixed_rate = 408000000, + .flags = TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK, +}; + +static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { + {9600000, 282240000, 147, 5, 0, 4}, + {9600000, 368640000, 192, 5, 0, 4}, + {9600000, 240000000, 200, 8, 0, 8}, + + {28800000, 282240000, 245, 25, 0, 8}, + {28800000, 368640000, 320, 25, 0, 8}, + {28800000, 240000000, 200, 24, 0, 8}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_a_params = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 200000000, + .vco_max = 700000000, + .base_reg = PLLA_BASE, + .misc_reg = PLLA_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .div_nmp = &pllp_nmp, + .freq_table = pll_a_freq_table, + .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK, +}; + +static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { + {12000000, 216000000, 864, 12, 4, 12}, + {13000000, 216000000, 864, 13, 4, 12}, + {16800000, 216000000, 720, 14, 4, 12}, + {19200000, 216000000, 720, 16, 4, 12}, + {26000000, 216000000, 864, 26, 4, 12}, + + {12000000, 594000000, 594, 12, 1, 12}, + {13000000, 594000000, 594, 13, 1, 12}, + {16800000, 594000000, 495, 14, 1, 12}, + {19200000, 594000000, 495, 16, 1, 12}, + {26000000, 594000000, 594, 26, 1, 12}, + + {12000000, 1000000000, 1000, 12, 1, 12}, + {13000000, 1000000000, 1000, 13, 1, 12}, + {19200000, 1000000000, 625, 12, 1, 12}, + {26000000, 1000000000, 1000, 26, 1, 12}, + + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_d_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 500000000, + .vco_max = 1000000000, + .base_reg = PLLD_BASE, + .misc_reg = PLLD_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, + .div_nmp = &pllp_nmp, + .freq_table = pll_d_freq_table, + .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, +}; + +static struct tegra_clk_pll_freq_table tegra124_pll_d2_freq_table[] = { + { 12000000, 148500000, 99, 1, 8}, + { 12000000, 594000000, 99, 1, 1}, + { 13000000, 594000000, 91, 1, 1}, /* actual: 591.5 MHz */ + { 16800000, 594000000, 71, 1, 1}, /* actual: 596.4 MHz */ + { 19200000, 594000000, 62, 1, 1}, /* actual: 595.2 MHz */ + { 26000000, 594000000, 91, 2, 1}, /* actual: 591.5 MHz */ + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct tegra_clk_pll_params tegra124_pll_d2_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */ + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLD2_BASE, + .misc_reg = PLLD2_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLD2_BASE, + .iddq_bit_idx = PLLSS_IDDQ_BIT, + .pdiv_tohw = pll12g_ssd_esd_p, + .div_nmp = &pllss_nmp, + .ext_misc_reg[0] = 0x570, + .ext_misc_reg[1] = 0x574, + .ext_misc_reg[2] = 0x578, + .max_p = 15, + .freq_table = tegra124_pll_d2_freq_table, +}; + +static struct tegra_clk_pll_freq_table pll_dp_freq_table[] = { + { 12000000, 600000000, 100, 1, 1}, + { 13000000, 600000000, 92, 1, 1}, /* actual: 598.0 MHz */ + { 16800000, 600000000, 71, 1, 1}, /* actual: 596.4 MHz */ + { 19200000, 600000000, 62, 1, 1}, /* actual: 595.2 MHz */ + { 26000000, 600000000, 92, 2, 1}, /* actual: 598.0 MHz */ + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct tegra_clk_pll_params pll_dp_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */ + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLDP_BASE, + .misc_reg = PLLDP_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLDP_BASE, + .iddq_bit_idx = PLLSS_IDDQ_BIT, + .pdiv_tohw = pll12g_ssd_esd_p, + .div_nmp = &pllss_nmp, + .ext_misc_reg[0] = 0x598, + .ext_misc_reg[1] = 0x59c, + .ext_misc_reg[2] = 0x5a0, + .max_p = 5, + .freq_table = pll_dp_freq_table, +}; + +static struct pdiv_map pllu_p[] = { + { .pdiv = 1, .hw_val = 1 }, + { .pdiv = 2, .hw_val = 0 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct div_nmp pllu_nmp = { + .divm_shift = 0, + .divm_width = 5, + .divn_shift = 8, + .divn_width = 10, + .divp_shift = 20, + .divp_width = 1, +}; + +static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { + {12000000, 480000000, 960, 12, 2, 12}, + {13000000, 480000000, 960, 13, 2, 12}, + {16800000, 480000000, 400, 7, 2, 5}, + {19200000, 480000000, 200, 4, 2, 3}, + {26000000, 480000000, 960, 26, 2, 12}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_u_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 480000000, + .vco_max = 960000000, + .base_reg = PLLU_BASE, + .misc_reg = PLLU_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, + .pdiv_tohw = pllu_p, + .div_nmp = &pllu_nmp, + .freq_table = pll_u_freq_table, + .flags = TEGRA_PLLU | TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, +}; + +struct utmi_clk_param { + /* Oscillator Frequency in KHz */ + u32 osc_frequency; + /* UTMIP PLL Enable Delay Count */ + u8 enable_delay_count; + /* UTMIP PLL Stable count */ + u8 stable_count; + /* UTMIP PLL Active delay count */ + u8 active_delay_count; + /* UTMIP PLL Xtal frequency count */ + u8 xtal_freq_count; +}; + +static const struct utmi_clk_param utmi_parameters[] = { + {.osc_frequency = 13000000, .enable_delay_count = 0x02, + .stable_count = 0x33, .active_delay_count = 0x05, + .xtal_freq_count = 0x7F}, + {.osc_frequency = 19200000, .enable_delay_count = 0x03, + .stable_count = 0x4B, .active_delay_count = 0x06, + .xtal_freq_count = 0xBB}, + {.osc_frequency = 12000000, .enable_delay_count = 0x02, + .stable_count = 0x2F, .active_delay_count = 0x04, + .xtal_freq_count = 0x76}, + {.osc_frequency = 26000000, .enable_delay_count = 0x04, + .stable_count = 0x66, .active_delay_count = 0x09, + .xtal_freq_count = 0xFE}, + {.osc_frequency = 16800000, .enable_delay_count = 0x03, + .stable_count = 0x41, .active_delay_count = 0x0A, + .xtal_freq_count = 0xA4}, +}; + +static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { + [tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true }, + [tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true }, + [tegra_clk_timer] = { .dt_id = TEGRA124_CLK_TIMER, .present = true }, + [tegra_clk_uarta] = { .dt_id = TEGRA124_CLK_UARTA, .present = true }, + [tegra_clk_sdmmc2] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true }, + [tegra_clk_i2s1] = { .dt_id = TEGRA124_CLK_I2S1, .present = true }, + [tegra_clk_i2c1] = { .dt_id = TEGRA124_CLK_I2C1, .present = true }, + [tegra_clk_ndflash] = { .dt_id = TEGRA124_CLK_NDFLASH, .present = true }, + [tegra_clk_sdmmc1] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true }, + [tegra_clk_sdmmc4] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true }, + [tegra_clk_pwm] = { .dt_id = TEGRA124_CLK_PWM, .present = true }, + [tegra_clk_i2s2] = { .dt_id = TEGRA124_CLK_I2S2, .present = true }, + [tegra_clk_gr2d] = { .dt_id = TEGRA124_CLK_GR_2D, .present = true }, + [tegra_clk_usbd] = { .dt_id = TEGRA124_CLK_USBD, .present = true }, + [tegra_clk_isp_8] = { .dt_id = TEGRA124_CLK_ISP, .present = true }, + [tegra_clk_gr3d] = { .dt_id = TEGRA124_CLK_GR_3D, .present = true }, + [tegra_clk_disp2] = { .dt_id = TEGRA124_CLK_DISP2, .present = true }, + [tegra_clk_disp1] = { .dt_id = TEGRA124_CLK_DISP1, .present = true }, + [tegra_clk_host1x] = { .dt_id = TEGRA124_CLK_HOST1X, .present = true }, + [tegra_clk_vcp] = { .dt_id = TEGRA124_CLK_VCP, .present = true }, + [tegra_clk_i2s0] = { .dt_id = TEGRA124_CLK_I2S0, .present = true }, + [tegra_clk_apbdma] = { .dt_id = TEGRA124_CLK_APBDMA, .present = true }, + [tegra_clk_kbc] = { .dt_id = TEGRA124_CLK_KBC, .present = true }, + [tegra_clk_kfuse] = { .dt_id = TEGRA124_CLK_KFUSE, .present = true }, + [tegra_clk_sbc1] = { .dt_id = TEGRA124_CLK_SBC1, .present = true }, + [tegra_clk_nor] = { .dt_id = TEGRA124_CLK_NOR, .present = true }, + [tegra_clk_sbc2] = { .dt_id = TEGRA124_CLK_SBC2, .present = true }, + [tegra_clk_sbc3] = { .dt_id = TEGRA124_CLK_SBC3, .present = true }, + [tegra_clk_i2c5] = { .dt_id = TEGRA124_CLK_I2C5, .present = true }, + [tegra_clk_dsia] = { .dt_id = TEGRA124_CLK_DSIA, .present = true }, + [tegra_clk_mipi] = { .dt_id = TEGRA124_CLK_MIPI, .present = true }, + [tegra_clk_hdmi] = { .dt_id = TEGRA124_CLK_HDMI, .present = true }, + [tegra_clk_csi] = { .dt_id = TEGRA124_CLK_CSI, .present = true }, + [tegra_clk_i2c2] = { .dt_id = TEGRA124_CLK_I2C2, .present = true }, + [tegra_clk_uartc] = { .dt_id = TEGRA124_CLK_UARTC, .present = true }, + [tegra_clk_mipi_cal] = { .dt_id = TEGRA124_CLK_MIPI_CAL, .present = true }, + [tegra_clk_emc] = { .dt_id = TEGRA124_CLK_EMC, .present = true }, + [tegra_clk_usb2] = { .dt_id = TEGRA124_CLK_USB2, .present = true }, + [tegra_clk_usb3] = { .dt_id = TEGRA124_CLK_USB3, .present = true }, + [tegra_clk_vde_8] = { .dt_id = TEGRA124_CLK_VDE, .present = true }, + [tegra_clk_bsea] = { .dt_id = TEGRA124_CLK_BSEA, .present = true }, + [tegra_clk_bsev] = { .dt_id = TEGRA124_CLK_BSEV, .present = true }, + [tegra_clk_uartd] = { .dt_id = TEGRA124_CLK_UARTD, .present = true }, + [tegra_clk_i2c3] = { .dt_id = TEGRA124_CLK_I2C3, .present = true }, + [tegra_clk_sbc4] = { .dt_id = TEGRA124_CLK_SBC4, .present = true }, + [tegra_clk_sdmmc3] = { .dt_id = TEGRA124_CLK_SDMMC3, .present = true }, + [tegra_clk_pcie] = { .dt_id = TEGRA124_CLK_PCIE, .present = true }, + [tegra_clk_owr] = { .dt_id = TEGRA124_CLK_OWR, .present = true }, + [tegra_clk_afi] = { .dt_id = TEGRA124_CLK_AFI, .present = true }, + [tegra_clk_csite] = { .dt_id = TEGRA124_CLK_CSITE, .present = true }, + [tegra_clk_la] = { .dt_id = TEGRA124_CLK_LA, .present = true }, + [tegra_clk_trace] = { .dt_id = TEGRA124_CLK_TRACE, .present = true }, + [tegra_clk_soc_therm] = { .dt_id = TEGRA124_CLK_SOC_THERM, .present = true }, + [tegra_clk_dtv] = { .dt_id = TEGRA124_CLK_DTV, .present = true }, + [tegra_clk_ndspeed] = { .dt_id = TEGRA124_CLK_NDSPEED, .present = true }, + [tegra_clk_i2cslow] = { .dt_id = TEGRA124_CLK_I2CSLOW, .present = true }, + [tegra_clk_dsib] = { .dt_id = TEGRA124_CLK_DSIB, .present = true }, + [tegra_clk_tsec] = { .dt_id = TEGRA124_CLK_TSEC, .present = true }, + [tegra_clk_xusb_host] = { .dt_id = TEGRA124_CLK_XUSB_HOST, .present = true }, + [tegra_clk_msenc] = { .dt_id = TEGRA124_CLK_MSENC, .present = true }, + [tegra_clk_csus] = { .dt_id = TEGRA124_CLK_CSUS, .present = true }, + [tegra_clk_mselect] = { .dt_id = TEGRA124_CLK_MSELECT, .present = true }, + [tegra_clk_tsensor] = { .dt_id = TEGRA124_CLK_TSENSOR, .present = true }, + [tegra_clk_i2s3] = { .dt_id = TEGRA124_CLK_I2S3, .present = true }, + [tegra_clk_i2s4] = { .dt_id = TEGRA124_CLK_I2S4, .present = true }, + [tegra_clk_i2c4] = { .dt_id = TEGRA124_CLK_I2C4, .present = true }, + [tegra_clk_sbc5] = { .dt_id = TEGRA124_CLK_SBC5, .present = true }, + [tegra_clk_sbc6] = { .dt_id = TEGRA124_CLK_SBC6, .present = true }, + [tegra_clk_d_audio] = { .dt_id = TEGRA124_CLK_D_AUDIO, .present = true }, + [tegra_clk_apbif] = { .dt_id = TEGRA124_CLK_APBIF, .present = true }, + [tegra_clk_dam0] = { .dt_id = TEGRA124_CLK_DAM0, .present = true }, + [tegra_clk_dam1] = { .dt_id = TEGRA124_CLK_DAM1, .present = true }, + [tegra_clk_dam2] = { .dt_id = TEGRA124_CLK_DAM2, .present = true }, + [tegra_clk_hda2codec_2x] = { .dt_id = TEGRA124_CLK_HDA2CODEC_2X, .present = true }, + [tegra_clk_audio0_2x] = { .dt_id = TEGRA124_CLK_AUDIO0_2X, .present = true }, + [tegra_clk_audio1_2x] = { .dt_id = TEGRA124_CLK_AUDIO1_2X, .present = true }, + [tegra_clk_audio2_2x] = { .dt_id = TEGRA124_CLK_AUDIO2_2X, .present = true }, + [tegra_clk_audio3_2x] = { .dt_id = TEGRA124_CLK_AUDIO3_2X, .present = true }, + [tegra_clk_audio4_2x] = { .dt_id = TEGRA124_CLK_AUDIO4_2X, .present = true }, + [tegra_clk_spdif_2x] = { .dt_id = TEGRA124_CLK_SPDIF_2X, .present = true }, + [tegra_clk_actmon] = { .dt_id = TEGRA124_CLK_ACTMON, .present = true }, + [tegra_clk_extern1] = { .dt_id = TEGRA124_CLK_EXTERN1, .present = true }, + [tegra_clk_extern2] = { .dt_id = TEGRA124_CLK_EXTERN2, .present = true }, + [tegra_clk_extern3] = { .dt_id = TEGRA124_CLK_EXTERN3, .present = true }, + [tegra_clk_sata_oob] = { .dt_id = TEGRA124_CLK_SATA_OOB, .present = true }, + [tegra_clk_sata] = { .dt_id = TEGRA124_CLK_SATA, .present = true }, + [tegra_clk_hda] = { .dt_id = TEGRA124_CLK_HDA, .present = true }, + [tegra_clk_se] = { .dt_id = TEGRA124_CLK_SE, .present = true }, + [tegra_clk_hda2hdmi] = { .dt_id = TEGRA124_CLK_HDA2HDMI, .present = true }, + [tegra_clk_sata_cold] = { .dt_id = TEGRA124_CLK_SATA_COLD, .present = true }, + [tegra_clk_cilab] = { .dt_id = TEGRA124_CLK_CILAB, .present = true }, + [tegra_clk_cilcd] = { .dt_id = TEGRA124_CLK_CILCD, .present = true }, + [tegra_clk_cile] = { .dt_id = TEGRA124_CLK_CILE, .present = true }, + [tegra_clk_dsialp] = { .dt_id = TEGRA124_CLK_DSIALP, .present = true }, + [tegra_clk_dsiblp] = { .dt_id = TEGRA124_CLK_DSIBLP, .present = true }, + [tegra_clk_entropy] = { .dt_id = TEGRA124_CLK_ENTROPY, .present = true }, + [tegra_clk_dds] = { .dt_id = TEGRA124_CLK_DDS, .present = true }, + [tegra_clk_dp2] = { .dt_id = TEGRA124_CLK_DP2, .present = true }, + [tegra_clk_amx] = { .dt_id = TEGRA124_CLK_AMX, .present = true }, + [tegra_clk_adx] = { .dt_id = TEGRA124_CLK_ADX, .present = true }, + [tegra_clk_xusb_ss] = { .dt_id = TEGRA124_CLK_XUSB_SS, .present = true }, + [tegra_clk_i2c6] = { .dt_id = TEGRA124_CLK_I2C6, .present = true }, + [tegra_clk_vim2_clk] = { .dt_id = TEGRA124_CLK_VIM2_CLK, .present = true }, + [tegra_clk_hdmi_audio] = { .dt_id = TEGRA124_CLK_HDMI_AUDIO, .present = true }, + [tegra_clk_clk72Mhz] = { .dt_id = TEGRA124_CLK_CLK72MHZ, .present = true }, + [tegra_clk_vic03] = { .dt_id = TEGRA124_CLK_VIC03, .present = true }, + [tegra_clk_adx1] = { .dt_id = TEGRA124_CLK_ADX1, .present = true }, + [tegra_clk_dpaux] = { .dt_id = TEGRA124_CLK_DPAUX, .present = true }, + [tegra_clk_sor0] = { .dt_id = TEGRA124_CLK_SOR0, .present = true }, + [tegra_clk_sor0_lvds] = { .dt_id = TEGRA124_CLK_SOR0_LVDS, .present = true }, + [tegra_clk_gpu] = { .dt_id = TEGRA124_CLK_GPU, .present = true }, + [tegra_clk_amx1] = { .dt_id = TEGRA124_CLK_AMX1, .present = true }, + [tegra_clk_uartb] = { .dt_id = TEGRA124_CLK_UARTB, .present = true }, + [tegra_clk_vfir] = { .dt_id = TEGRA124_CLK_VFIR, .present = true }, + [tegra_clk_spdif_in] = { .dt_id = TEGRA124_CLK_SPDIF_IN, .present = true }, + [tegra_clk_spdif_out] = { .dt_id = TEGRA124_CLK_SPDIF_OUT, .present = true }, + [tegra_clk_vi_9] = { .dt_id = TEGRA124_CLK_VI, .present = true }, + [tegra_clk_vi_sensor] = { .dt_id = TEGRA124_CLK_VI_SENSOR, .present = true }, + [tegra_clk_fuse] = { .dt_id = TEGRA124_CLK_FUSE, .present = true }, + [tegra_clk_fuse_burn] = { .dt_id = TEGRA124_CLK_FUSE_BURN, .present = true }, + [tegra_clk_clk_32k] = { .dt_id = TEGRA124_CLK_CLK_32K, .present = true }, + [tegra_clk_clk_m] = { .dt_id = TEGRA124_CLK_CLK_M, .present = true }, + [tegra_clk_clk_m_div2] = { .dt_id = TEGRA124_CLK_CLK_M_DIV2, .present = true }, + [tegra_clk_clk_m_div4] = { .dt_id = TEGRA124_CLK_CLK_M_DIV4, .present = true }, + [tegra_clk_pll_ref] = { .dt_id = TEGRA124_CLK_PLL_REF, .present = true }, + [tegra_clk_pll_c] = { .dt_id = TEGRA124_CLK_PLL_C, .present = true }, + [tegra_clk_pll_c_out1] = { .dt_id = TEGRA124_CLK_PLL_C_OUT1, .present = true }, + [tegra_clk_pll_c2] = { .dt_id = TEGRA124_CLK_PLL_C2, .present = true }, + [tegra_clk_pll_c3] = { .dt_id = TEGRA124_CLK_PLL_C3, .present = true }, + [tegra_clk_pll_m] = { .dt_id = TEGRA124_CLK_PLL_M, .present = true }, + [tegra_clk_pll_m_out1] = { .dt_id = TEGRA124_CLK_PLL_M_OUT1, .present = true }, + [tegra_clk_pll_p] = { .dt_id = TEGRA124_CLK_PLL_P, .present = true }, + [tegra_clk_pll_p_out1] = { .dt_id = TEGRA124_CLK_PLL_P_OUT1, .present = true }, + [tegra_clk_pll_p_out2] = { .dt_id = TEGRA124_CLK_PLL_P_OUT2, .present = true }, + [tegra_clk_pll_p_out3] = { .dt_id = TEGRA124_CLK_PLL_P_OUT3, .present = true }, + [tegra_clk_pll_p_out4] = { .dt_id = TEGRA124_CLK_PLL_P_OUT4, .present = true }, + [tegra_clk_pll_a] = { .dt_id = TEGRA124_CLK_PLL_A, .present = true }, + [tegra_clk_pll_a_out0] = { .dt_id = TEGRA124_CLK_PLL_A_OUT0, .present = true }, + [tegra_clk_pll_d] = { .dt_id = TEGRA124_CLK_PLL_D, .present = true }, + [tegra_clk_pll_d_out0] = { .dt_id = TEGRA124_CLK_PLL_D_OUT0, .present = true }, + [tegra_clk_pll_d2] = { .dt_id = TEGRA124_CLK_PLL_D2, .present = true }, + [tegra_clk_pll_d2_out0] = { .dt_id = TEGRA124_CLK_PLL_D2_OUT0, .present = true }, + [tegra_clk_pll_u] = { .dt_id = TEGRA124_CLK_PLL_U, .present = true }, + [tegra_clk_pll_u_480m] = { .dt_id = TEGRA124_CLK_PLL_U_480M, .present = true }, + [tegra_clk_pll_u_60m] = { .dt_id = TEGRA124_CLK_PLL_U_60M, .present = true }, + [tegra_clk_pll_u_48m] = { .dt_id = TEGRA124_CLK_PLL_U_48M, .present = true }, + [tegra_clk_pll_u_12m] = { .dt_id = TEGRA124_CLK_PLL_U_12M, .present = true }, + [tegra_clk_pll_x] = { .dt_id = TEGRA124_CLK_PLL_X, .present = true }, + [tegra_clk_pll_x_out0] = { .dt_id = TEGRA124_CLK_PLL_X_OUT0, .present = true }, + [tegra_clk_pll_re_vco] = { .dt_id = TEGRA124_CLK_PLL_RE_VCO, .present = true }, + [tegra_clk_pll_re_out] = { .dt_id = TEGRA124_CLK_PLL_RE_OUT, .present = true }, + [tegra_clk_spdif_in_sync] = { .dt_id = TEGRA124_CLK_SPDIF_IN_SYNC, .present = true }, + [tegra_clk_i2s0_sync] = { .dt_id = TEGRA124_CLK_I2S0_SYNC, .present = true }, + [tegra_clk_i2s1_sync] = { .dt_id = TEGRA124_CLK_I2S1_SYNC, .present = true }, + [tegra_clk_i2s2_sync] = { .dt_id = TEGRA124_CLK_I2S2_SYNC, .present = true }, + [tegra_clk_i2s3_sync] = { .dt_id = TEGRA124_CLK_I2S3_SYNC, .present = true }, + [tegra_clk_i2s4_sync] = { .dt_id = TEGRA124_CLK_I2S4_SYNC, .present = true }, + [tegra_clk_vimclk_sync] = { .dt_id = TEGRA124_CLK_VIMCLK_SYNC, .present = true }, + [tegra_clk_audio0] = { .dt_id = TEGRA124_CLK_AUDIO0, .present = true }, + [tegra_clk_audio1] = { .dt_id = TEGRA124_CLK_AUDIO1, .present = true }, + [tegra_clk_audio2] = { .dt_id = TEGRA124_CLK_AUDIO2, .present = true }, + [tegra_clk_audio3] = { .dt_id = TEGRA124_CLK_AUDIO3, .present = true }, + [tegra_clk_audio4] = { .dt_id = TEGRA124_CLK_AUDIO4, .present = true }, + [tegra_clk_spdif] = { .dt_id = TEGRA124_CLK_SPDIF, .present = true }, + [tegra_clk_clk_out_1] = { .dt_id = TEGRA124_CLK_CLK_OUT_1, .present = true }, + [tegra_clk_clk_out_2] = { .dt_id = TEGRA124_CLK_CLK_OUT_2, .present = true }, + [tegra_clk_clk_out_3] = { .dt_id = TEGRA124_CLK_CLK_OUT_3, .present = true }, + [tegra_clk_blink] = { .dt_id = TEGRA124_CLK_BLINK, .present = true }, + [tegra_clk_xusb_host_src] = { .dt_id = TEGRA124_CLK_XUSB_HOST_SRC, .present = true }, + [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true }, + [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true }, + [tegra_clk_xusb_ss_src] = { .dt_id = TEGRA124_CLK_XUSB_SS_SRC, .present = true }, + [tegra_clk_xusb_dev_src] = { .dt_id = TEGRA124_CLK_XUSB_DEV_SRC, .present = true }, + [tegra_clk_xusb_dev] = { .dt_id = TEGRA124_CLK_XUSB_DEV, .present = true }, + [tegra_clk_xusb_hs_src] = { .dt_id = TEGRA124_CLK_XUSB_HS_SRC, .present = true }, + [tegra_clk_sclk] = { .dt_id = TEGRA124_CLK_SCLK, .present = true }, + [tegra_clk_hclk] = { .dt_id = TEGRA124_CLK_HCLK, .present = true }, + [tegra_clk_pclk] = { .dt_id = TEGRA124_CLK_PCLK, .present = true }, + [tegra_clk_cclk_g] = { .dt_id = TEGRA124_CLK_CCLK_G, .present = true }, + [tegra_clk_cclk_lp] = { .dt_id = TEGRA124_CLK_CCLK_LP, .present = true }, + [tegra_clk_dfll_ref] = { .dt_id = TEGRA124_CLK_DFLL_REF, .present = true }, + [tegra_clk_dfll_soc] = { .dt_id = TEGRA124_CLK_DFLL_SOC, .present = true }, + [tegra_clk_vi_sensor2] = { .dt_id = TEGRA124_CLK_VI_SENSOR2, .present = true }, + [tegra_clk_pll_p_out5] = { .dt_id = TEGRA124_CLK_PLL_P_OUT5, .present = true }, + [tegra_clk_pll_c4] = { .dt_id = TEGRA124_CLK_PLL_C4, .present = true }, + [tegra_clk_pll_dp] = { .dt_id = TEGRA124_CLK_PLL_DP, .present = true }, + [tegra_clk_audio0_mux] = { .dt_id = TEGRA124_CLK_AUDIO0_MUX, .present = true }, + [tegra_clk_audio1_mux] = { .dt_id = TEGRA124_CLK_AUDIO1_MUX, .present = true }, + [tegra_clk_audio2_mux] = { .dt_id = TEGRA124_CLK_AUDIO2_MUX, .present = true }, + [tegra_clk_audio3_mux] = { .dt_id = TEGRA124_CLK_AUDIO3_MUX, .present = true }, + [tegra_clk_audio4_mux] = { .dt_id = TEGRA124_CLK_AUDIO4_MUX, .present = true }, + [tegra_clk_spdif_mux] = { .dt_id = TEGRA124_CLK_SPDIF_MUX, .present = true }, + [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_1_MUX, .present = true }, + [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_2_MUX, .present = true }, + [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true }, + [tegra_clk_dsia_mux] = { .dt_id = TEGRA124_CLK_DSIA_MUX, .present = true }, + [tegra_clk_dsib_mux] = { .dt_id = TEGRA124_CLK_DSIB_MUX, .present = true }, + [tegra_clk_uarte] = { .dt_id = TEGRA124_CLK_UARTE, .present = true }, +}; + +static struct tegra_devclk devclks[] __initdata = { + { .con_id = "clk_m", .dt_id = TEGRA124_CLK_CLK_M }, + { .con_id = "pll_ref", .dt_id = TEGRA124_CLK_PLL_REF }, + { .con_id = "clk_32k", .dt_id = TEGRA124_CLK_CLK_32K }, + { .con_id = "clk_m_div2", .dt_id = TEGRA124_CLK_CLK_M_DIV2 }, + { .con_id = "clk_m_div4", .dt_id = TEGRA124_CLK_CLK_M_DIV4 }, + { .con_id = "pll_c", .dt_id = TEGRA124_CLK_PLL_C }, + { .con_id = "pll_c_out1", .dt_id = TEGRA124_CLK_PLL_C_OUT1 }, + { .con_id = "pll_c2", .dt_id = TEGRA124_CLK_PLL_C2 }, + { .con_id = "pll_c3", .dt_id = TEGRA124_CLK_PLL_C3 }, + { .con_id = "pll_p", .dt_id = TEGRA124_CLK_PLL_P }, + { .con_id = "pll_p_out1", .dt_id = TEGRA124_CLK_PLL_P_OUT1 }, + { .con_id = "pll_p_out2", .dt_id = TEGRA124_CLK_PLL_P_OUT2 }, + { .con_id = "pll_p_out3", .dt_id = TEGRA124_CLK_PLL_P_OUT3 }, + { .con_id = "pll_p_out4", .dt_id = TEGRA124_CLK_PLL_P_OUT4 }, + { .con_id = "pll_m", .dt_id = TEGRA124_CLK_PLL_M }, + { .con_id = "pll_m_out1", .dt_id = TEGRA124_CLK_PLL_M_OUT1 }, + { .con_id = "pll_x", .dt_id = TEGRA124_CLK_PLL_X }, + { .con_id = "pll_x_out0", .dt_id = TEGRA124_CLK_PLL_X_OUT0 }, + { .con_id = "pll_u", .dt_id = TEGRA124_CLK_PLL_U }, + { .con_id = "pll_u_480M", .dt_id = TEGRA124_CLK_PLL_U_480M }, + { .con_id = "pll_u_60M", .dt_id = TEGRA124_CLK_PLL_U_60M }, + { .con_id = "pll_u_48M", .dt_id = TEGRA124_CLK_PLL_U_48M }, + { .con_id = "pll_u_12M", .dt_id = TEGRA124_CLK_PLL_U_12M }, + { .con_id = "pll_d", .dt_id = TEGRA124_CLK_PLL_D }, + { .con_id = "pll_d_out0", .dt_id = TEGRA124_CLK_PLL_D_OUT0 }, + { .con_id = "pll_d2", .dt_id = TEGRA124_CLK_PLL_D2 }, + { .con_id = "pll_d2_out0", .dt_id = TEGRA124_CLK_PLL_D2_OUT0 }, + { .con_id = "pll_a", .dt_id = TEGRA124_CLK_PLL_A }, + { .con_id = "pll_a_out0", .dt_id = TEGRA124_CLK_PLL_A_OUT0 }, + { .con_id = "pll_re_vco", .dt_id = TEGRA124_CLK_PLL_RE_VCO }, + { .con_id = "pll_re_out", .dt_id = TEGRA124_CLK_PLL_RE_OUT }, + { .con_id = "spdif_in_sync", .dt_id = TEGRA124_CLK_SPDIF_IN_SYNC }, + { .con_id = "i2s0_sync", .dt_id = TEGRA124_CLK_I2S0_SYNC }, + { .con_id = "i2s1_sync", .dt_id = TEGRA124_CLK_I2S1_SYNC }, + { .con_id = "i2s2_sync", .dt_id = TEGRA124_CLK_I2S2_SYNC }, + { .con_id = "i2s3_sync", .dt_id = TEGRA124_CLK_I2S3_SYNC }, + { .con_id = "i2s4_sync", .dt_id = TEGRA124_CLK_I2S4_SYNC }, + { .con_id = "vimclk_sync", .dt_id = TEGRA124_CLK_VIMCLK_SYNC }, + { .con_id = "audio0", .dt_id = TEGRA124_CLK_AUDIO0 }, + { .con_id = "audio1", .dt_id = TEGRA124_CLK_AUDIO1 }, + { .con_id = "audio2", .dt_id = TEGRA124_CLK_AUDIO2 }, + { .con_id = "audio3", .dt_id = TEGRA124_CLK_AUDIO3 }, + { .con_id = "audio4", .dt_id = TEGRA124_CLK_AUDIO4 }, + { .con_id = "spdif", .dt_id = TEGRA124_CLK_SPDIF }, + { .con_id = "audio0_2x", .dt_id = TEGRA124_CLK_AUDIO0_2X }, + { .con_id = "audio1_2x", .dt_id = TEGRA124_CLK_AUDIO1_2X }, + { .con_id = "audio2_2x", .dt_id = TEGRA124_CLK_AUDIO2_2X }, + { .con_id = "audio3_2x", .dt_id = TEGRA124_CLK_AUDIO3_2X }, + { .con_id = "audio4_2x", .dt_id = TEGRA124_CLK_AUDIO4_2X }, + { .con_id = "spdif_2x", .dt_id = TEGRA124_CLK_SPDIF_2X }, + { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA124_CLK_EXTERN1 }, + { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA124_CLK_EXTERN2 }, + { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA124_CLK_EXTERN3 }, + { .con_id = "blink", .dt_id = TEGRA124_CLK_BLINK }, + { .con_id = "cclk_g", .dt_id = TEGRA124_CLK_CCLK_G }, + { .con_id = "cclk_lp", .dt_id = TEGRA124_CLK_CCLK_LP }, + { .con_id = "sclk", .dt_id = TEGRA124_CLK_SCLK }, + { .con_id = "hclk", .dt_id = TEGRA124_CLK_HCLK }, + { .con_id = "pclk", .dt_id = TEGRA124_CLK_PCLK }, + { .dev_id = "rtc-tegra", .dt_id = TEGRA124_CLK_RTC }, + { .dev_id = "timer", .dt_id = TEGRA124_CLK_TIMER }, +}; + +static struct clk **clks; + +static void tegra124_utmi_param_configure(void __iomem *clk_base) +{ + u32 reg; + int i; + + for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { + if (osc_freq == utmi_parameters[i].osc_frequency) + break; + } + + if (i >= ARRAY_SIZE(utmi_parameters)) { + pr_err("%s: Unexpected oscillator freq %lu\n", __func__, + osc_freq); + return; + } + + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); + + /* Program UTMIP PLL stable and active counts */ + /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ + reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); + reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); + + reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. + active_delay_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; + + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); + + /* Program UTMIP PLL delay and oscillator frequency counts */ + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); + reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. + enable_delay_count); + + reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); + reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. + xtal_freq_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); + + /* Setup HW control of UTMIPLL */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; + reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; + reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); + + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); + + udelay(1); + + /* Setup SW override of UTMIPLL assuming USB2.0 + ports are assigned to USB2 */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL; + reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); + + udelay(1); + + /* Enable HW control UTMIPLL */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); +} + +static __init void tegra124_periph_clk_init(void __iomem *clk_base, + void __iomem *pmc_base) +{ + struct clk *clk; + u32 val; + + /* xusb_hs_src */ + val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC); + val |= BIT(25); /* always select PLLU_60M */ + writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC); + + clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0, + 1, 1); + clks[TEGRA124_CLK_XUSB_HS_SRC] = clk; + + /* dsia mux */ + clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0, + ARRAY_SIZE(mux_plld_out0_plld2_out0), 0, + clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock); + clks[TEGRA124_CLK_DSIA_MUX] = clk; + + /* dsib mux */ + clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0, + ARRAY_SIZE(mux_plld_out0_plld2_out0), 0, + clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock); + clks[TEGRA124_CLK_DSIB_MUX] = clk; + + /* emc mux */ + clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm, + ARRAY_SIZE(mux_pllmcp_clkm), 0, + clk_base + CLK_SOURCE_EMC, + 29, 3, 0, NULL); + + /* cml0 */ + clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX, + 0, 0, &pll_e_lock); + clk_register_clkdev(clk, "cml0", NULL); + clks[TEGRA124_CLK_CML0] = clk; + + /* cml1 */ + clk = clk_register_gate(NULL, "cml1", "pll_e", 0, clk_base + PLLE_AUX, + 1, 0, &pll_e_lock); + clk_register_clkdev(clk, "cml1", NULL); + clks[TEGRA124_CLK_CML1] = clk; + + tegra_periph_clk_init(clk_base, pmc_base, tegra124_clks, &pll_p_params); +} + +static void __init tegra124_pll_init(void __iomem *clk_base, + void __iomem *pmc) +{ + u32 val; + struct clk *clk; + + /* PLLC */ + clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base, + pmc, 0, &pll_c_params, NULL); + clk_register_clkdev(clk, "pll_c", NULL); + clks[TEGRA124_CLK_PLL_C] = clk; + + /* PLLC_OUT1 */ + clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c", + clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div", + clk_base + PLLC_OUT, 1, 0, + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_c_out1", NULL); + clks[TEGRA124_CLK_PLL_C_OUT1] = clk; + + /* PLLC2 */ + clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, + &pll_c2_params, NULL); + clk_register_clkdev(clk, "pll_c2", NULL); + clks[TEGRA124_CLK_PLL_C2] = clk; + + /* PLLC3 */ + clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0, + &pll_c3_params, NULL); + clk_register_clkdev(clk, "pll_c3", NULL); + clks[TEGRA124_CLK_PLL_C3] = clk; + + /* PLLM */ + clk = tegra_clk_register_pllm("pll_m", "pll_ref", clk_base, pmc, + CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, + &pll_m_params, NULL); + clk_register_clkdev(clk, "pll_m", NULL); + clks[TEGRA124_CLK_PLL_M] = clk; + + /* PLLM_OUT1 */ + clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m", + clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div", + clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_m_out1", NULL); + clks[TEGRA124_CLK_PLL_M_OUT1] = clk; + + /* PLLM_UD */ + clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m", + CLK_SET_RATE_PARENT, 1, 1); + + /* PLLU */ + val = readl(clk_base + pll_u_params.base_reg); + val &= ~BIT(24); /* disable PLLU_OVERRIDE */ + writel(val, clk_base + pll_u_params.base_reg); + + clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0, + &pll_u_params, &pll_u_lock); + clk_register_clkdev(clk, "pll_u", NULL); + clks[TEGRA124_CLK_PLL_U] = clk; + + tegra124_utmi_param_configure(clk_base); + + /* PLLU_480M */ + clk = clk_register_gate(NULL, "pll_u_480M", "pll_u", + CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, + 22, 0, &pll_u_lock); + clk_register_clkdev(clk, "pll_u_480M", NULL); + clks[TEGRA124_CLK_PLL_U_480M] = clk; + + /* PLLU_60M */ + clk = clk_register_fixed_factor(NULL, "pll_u_60M", "pll_u", + CLK_SET_RATE_PARENT, 1, 8); + clk_register_clkdev(clk, "pll_u_60M", NULL); + clks[TEGRA124_CLK_PLL_U_60M] = clk; + + /* PLLU_48M */ + clk = clk_register_fixed_factor(NULL, "pll_u_48M", "pll_u", + CLK_SET_RATE_PARENT, 1, 10); + clk_register_clkdev(clk, "pll_u_48M", NULL); + clks[TEGRA124_CLK_PLL_U_48M] = clk; + + /* PLLU_12M */ + clk = clk_register_fixed_factor(NULL, "pll_u_12M", "pll_u", + CLK_SET_RATE_PARENT, 1, 40); + clk_register_clkdev(clk, "pll_u_12M", NULL); + clks[TEGRA124_CLK_PLL_U_12M] = clk; + + /* PLLD */ + clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0, + &pll_d_params, &pll_d_lock); + clk_register_clkdev(clk, "pll_d", NULL); + clks[TEGRA124_CLK_PLL_D] = clk; + + /* PLLD_OUT0 */ + clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_d_out0", NULL); + clks[TEGRA124_CLK_PLL_D_OUT0] = clk; + + /* PLLRE */ + clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc, + 0, &pll_re_vco_params, &pll_re_lock, pll_ref_freq); + clk_register_clkdev(clk, "pll_re_vco", NULL); + clks[TEGRA124_CLK_PLL_RE_VCO] = clk; + + clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0, + clk_base + PLLRE_BASE, 16, 4, 0, + pll_re_div_table, &pll_re_lock); + clk_register_clkdev(clk, "pll_re_out", NULL); + clks[TEGRA124_CLK_PLL_RE_OUT] = clk; + + /* PLLE */ + clk = tegra_clk_register_plle_tegra114("pll_e", "pll_ref", + clk_base, 0, &pll_e_params, NULL); + clk_register_clkdev(clk, "pll_e", NULL); + clks[TEGRA124_CLK_PLL_E] = clk; + + /* PLLC4 */ + clk = tegra_clk_register_pllss("pll_c4", "pll_ref", clk_base, 0, + &pll_c4_params, NULL); + clk_register_clkdev(clk, "pll_c4", NULL); + clks[TEGRA124_CLK_PLL_C4] = clk; + + /* PLLDP */ + clk = tegra_clk_register_pllss("pll_dp", "pll_ref", clk_base, 0, + &pll_dp_params, NULL); + clk_register_clkdev(clk, "pll_dp", NULL); + clks[TEGRA124_CLK_PLL_DP] = clk; + + /* PLLD2 */ + clk = tegra_clk_register_pllss("pll_d2", "pll_ref", clk_base, 0, + &tegra124_pll_d2_params, NULL); + clk_register_clkdev(clk, "pll_d2", NULL); + clks[TEGRA124_CLK_PLL_D2] = clk; + + /* PLLD2_OUT0 ?? */ + clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_d2_out0", NULL); + clks[TEGRA124_CLK_PLL_D2_OUT0] = clk; + +} + +static const struct of_device_id pmc_match[] __initconst = { + { .compatible = "nvidia,tegra124-pmc" }, + {}, +}; + +static struct tegra_clk_init_table init_table[] __initdata = { + {TEGRA124_CLK_UARTA, TEGRA124_CLK_PLL_P, 408000000, 0}, + {TEGRA124_CLK_UARTB, TEGRA124_CLK_PLL_P, 408000000, 0}, + {TEGRA124_CLK_UARTC, TEGRA124_CLK_PLL_P, 408000000, 0}, + {TEGRA124_CLK_UARTD, TEGRA124_CLK_PLL_P, 408000000, 0}, + {TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 1}, + {TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 1}, + {TEGRA124_CLK_EXTERN1, TEGRA124_CLK_PLL_A_OUT0, 0, 1}, + {TEGRA124_CLK_CLK_OUT_1_MUX, TEGRA124_CLK_EXTERN1, 0, 1}, + {TEGRA124_CLK_CLK_OUT_1, TEGRA124_CLK_CLK_MAX, 0, 1}, + {TEGRA124_CLK_I2S0, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0}, + {TEGRA124_CLK_I2S1, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0}, + {TEGRA124_CLK_I2S2, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0}, + {TEGRA124_CLK_I2S3, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0}, + {TEGRA124_CLK_I2S4, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0}, + {TEGRA124_CLK_VDE, TEGRA124_CLK_PLL_P, 0, 0}, + {TEGRA124_CLK_HOST1X, TEGRA124_CLK_PLL_P, 136000000, 1}, + {TEGRA124_CLK_SCLK, TEGRA124_CLK_PLL_P_OUT2, 102000000, 1}, + {TEGRA124_CLK_DFLL_SOC, TEGRA124_CLK_PLL_P, 51000000, 1}, + {TEGRA124_CLK_DFLL_REF, TEGRA124_CLK_PLL_P, 51000000, 1}, + {TEGRA124_CLK_PLL_C, TEGRA124_CLK_CLK_MAX, 768000000, 0}, + {TEGRA124_CLK_PLL_C_OUT1, TEGRA124_CLK_CLK_MAX, 100000000, 0}, + {TEGRA124_CLK_SBC4, TEGRA124_CLK_PLL_P, 12000000, 1}, + {TEGRA124_CLK_TSEC, TEGRA124_CLK_PLL_C3, 0, 0}, + {TEGRA124_CLK_MSENC, TEGRA124_CLK_PLL_C3, 0, 0}, + /* This MUST be the last entry. */ + {TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0}, +}; + +static void __init tegra124_clock_apply_init_table(void) +{ + tegra_init_from_table(init_table, clks, TEGRA124_CLK_CLK_MAX); +} + +static void __init tegra124_clock_init(struct device_node *np) +{ + struct device_node *node; + + clk_base = of_iomap(np, 0); + if (!clk_base) { + pr_err("ioremap tegra124 CAR failed\n"); + return; + } + + node = of_find_matching_node(NULL, pmc_match); + if (!node) { + pr_err("Failed to find pmc node\n"); + WARN_ON(1); + return; + } + + pmc_base = of_iomap(node, 0); + if (!pmc_base) { + pr_err("Can't map pmc registers\n"); + WARN_ON(1); + return; + } + + clks = tegra_clk_init(TEGRA124_CLK_CLK_MAX, 6); + if (!clks) + return; + + if (tegra_osc_clk_init(clk_base, tegra124_clks, tegra124_input_freq, + ARRAY_SIZE(tegra124_input_freq), &osc_freq, &pll_ref_freq) < 0) + return; + + tegra_fixed_clk_init(tegra124_clks); + tegra124_pll_init(clk_base, pmc_base); + tegra124_periph_clk_init(clk_base, pmc_base); + tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks, &pll_a_params); + tegra_pmc_clk_init(pmc_base, tegra124_clks); + + tegra_super_clk_gen4_init(clk_base, pmc_base, tegra124_clks, + &pll_x_params); + tegra_add_of_provider(np); + tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); + + tegra_clk_apply_init_table = tegra124_clock_apply_init_table; +} +CLK_OF_DECLARE(tegra124, "nvidia,tegra124-car", tegra124_clock_init); diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h new file mode 100644 index 000000000000..a1116a3b54ef --- /dev/null +++ b/include/dt-bindings/clock/tegra124-car.h @@ -0,0 +1,341 @@ +/* + * This header provides constants for binding nvidia,tegra124-car. + * + * The first 192 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 185 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 185 and + * above. + */ + +#ifndef _DT_BINDINGS_CLOCK_TEGRA124_CAR_H +#define _DT_BINDINGS_CLOCK_TEGRA124_CAR_H + +/* 0 */ +/* 1 */ +/* 2 */ +#define TEGRA124_CLK_ISPB 3 +#define TEGRA124_CLK_RTC 4 +#define TEGRA124_CLK_TIMER 5 +#define TEGRA124_CLK_UARTA 6 +/* 7 (register bit affects uartb and vfir) */ +/* 8 */ +#define TEGRA124_CLK_SDMMC2 9 +/* 10 (register bit affects spdif_in and spdif_out) */ +#define TEGRA124_CLK_I2S1 11 +#define TEGRA124_CLK_I2C1 12 +#define TEGRA124_CLK_NDFLASH 13 +#define TEGRA124_CLK_SDMMC1 14 +#define TEGRA124_CLK_SDMMC4 15 +/* 16 */ +#define TEGRA124_CLK_PWM 17 +#define TEGRA124_CLK_I2S2 18 +/* 20 (register bit affects vi and vi_sensor) */ +#define TEGRA124_CLK_GR_2D 21 +#define TEGRA124_CLK_USBD 22 +#define TEGRA124_CLK_ISP 23 +#define TEGRA124_CLK_GR_3D 24 +/* 25 */ +#define TEGRA124_CLK_DISP2 26 +#define TEGRA124_CLK_DISP1 27 +#define TEGRA124_CLK_HOST1X 28 +#define TEGRA124_CLK_VCP 29 +#define TEGRA124_CLK_I2S0 30 +/* 31 */ + +/* 32 */ +/* 33 */ +#define TEGRA124_CLK_APBDMA 34 +/* 35 */ +#define TEGRA124_CLK_KBC 36 +/* 37 */ +/* 38 */ +/* 39 (register bit affects fuse and fuse_burn) */ +#define TEGRA124_CLK_KFUSE 40 +#define TEGRA124_CLK_SBC1 41 +#define TEGRA124_CLK_NOR 42 +/* 43 */ +#define TEGRA124_CLK_SBC2 44 +/* 45 */ +#define TEGRA124_CLK_SBC3 46 +#define TEGRA124_CLK_I2C5 47 +#define TEGRA124_CLK_DSIA 48 +/* 49 */ +#define TEGRA124_CLK_MIPI 50 +#define TEGRA124_CLK_HDMI 51 +#define TEGRA124_CLK_CSI 52 +/* 53 */ +#define TEGRA124_CLK_I2C2 54 +#define TEGRA124_CLK_UARTC 55 +#define TEGRA124_CLK_MIPI_CAL 56 +#define TEGRA124_CLK_EMC 57 +#define TEGRA124_CLK_USB2 58 +#define TEGRA124_CLK_USB3 59 +/* 60 */ +#define TEGRA124_CLK_VDE 61 +#define TEGRA124_CLK_BSEA 62 +#define TEGRA124_CLK_BSEV 63 + +/* 64 */ +#define TEGRA124_CLK_UARTD 65 +#define TEGRA124_CLK_UARTE 66 +#define TEGRA124_CLK_I2C3 67 +#define TEGRA124_CLK_SBC4 68 +#define TEGRA124_CLK_SDMMC3 69 +#define TEGRA124_CLK_PCIE 70 +#define TEGRA124_CLK_OWR 71 +#define TEGRA124_CLK_AFI 72 +#define TEGRA124_CLK_CSITE 73 +/* 74 */ +/* 75 */ +#define TEGRA124_CLK_LA 76 +#define TEGRA124_CLK_TRACE 77 +#define TEGRA124_CLK_SOC_THERM 78 +#define TEGRA124_CLK_DTV 79 +#define TEGRA124_CLK_NDSPEED 80 +#define TEGRA124_CLK_I2CSLOW 81 +#define TEGRA124_CLK_DSIB 82 +#define TEGRA124_CLK_TSEC 83 +/* 84 */ +/* 85 */ +/* 86 */ +/* 87 */ +/* 88 */ +#define TEGRA124_CLK_XUSB_HOST 89 +/* 90 */ +#define TEGRA124_CLK_MSENC 91 +#define TEGRA124_CLK_CSUS 92 +/* 93 */ +/* 94 */ +/* 95 (bit affects xusb_dev and xusb_dev_src) */ + +/* 96 */ +/* 97 */ +/* 98 */ +#define TEGRA124_CLK_MSELECT 99 +#define TEGRA124_CLK_TSENSOR 100 +#define TEGRA124_CLK_I2S3 101 +#define TEGRA124_CLK_I2S4 102 +#define TEGRA124_CLK_I2C4 103 +#define TEGRA124_CLK_SBC5 104 +#define TEGRA124_CLK_SBC6 105 +#define TEGRA124_CLK_D_AUDIO 106 +#define TEGRA124_CLK_APBIF 107 +#define TEGRA124_CLK_DAM0 108 +#define TEGRA124_CLK_DAM1 109 +#define TEGRA124_CLK_DAM2 110 +#define TEGRA124_CLK_HDA2CODEC_2X 111 +/* 112 */ +#define TEGRA124_CLK_AUDIO0_2X 113 +#define TEGRA124_CLK_AUDIO1_2X 114 +#define TEGRA124_CLK_AUDIO2_2X 115 +#define TEGRA124_CLK_AUDIO3_2X 116 +#define TEGRA124_CLK_AUDIO4_2X 117 +#define TEGRA124_CLK_SPDIF_2X 118 +#define TEGRA124_CLK_ACTMON 119 +#define TEGRA124_CLK_EXTERN1 120 +#define TEGRA124_CLK_EXTERN2 121 +#define TEGRA124_CLK_EXTERN3 122 +#define TEGRA124_CLK_SATA_OOB 123 +#define TEGRA124_CLK_SATA 124 +#define TEGRA124_CLK_HDA 125 +/* 126 */ +#define TEGRA124_CLK_SE 127 + +#define TEGRA124_CLK_HDA2HDMI 128 +#define TEGRA124_CLK_SATA_COLD 129 +/* 130 */ +/* 131 */ +/* 132 */ +/* 133 */ +/* 134 */ +/* 135 */ +/* 136 */ +/* 137 */ +/* 138 */ +/* 139 */ +/* 140 */ +/* 141 */ +/* 142 */ +/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */ +/* xusb_host_src and xusb_ss_src) */ +#define TEGRA124_CLK_CILAB 144 +#define TEGRA124_CLK_CILCD 145 +#define TEGRA124_CLK_CILE 146 +#define TEGRA124_CLK_DSIALP 147 +#define TEGRA124_CLK_DSIBLP 148 +#define TEGRA124_CLK_ENTROPY 149 +#define TEGRA124_CLK_DDS 150 +/* 151 */ +#define TEGRA124_CLK_DP2 152 +#define TEGRA124_CLK_AMX 153 +#define TEGRA124_CLK_ADX 154 +/* 155 (bit affects dfll_ref and dfll_soc) */ +#define TEGRA124_CLK_XUSB_SS 156 +/* 157 */ +/* 158 */ +/* 159 */ + +/* 160 */ +/* 161 */ +/* 162 */ +/* 163 */ +/* 164 */ +/* 165 */ +#define TEGRA124_CLK_I2C6 166 +/* 167 */ +/* 168 */ +/* 169 */ +/* 170 */ +#define TEGRA124_CLK_VIM2_CLK 171 +/* 172 */ +/* 173 */ +/* 174 */ +/* 175 */ +#define TEGRA124_CLK_HDMI_AUDIO 176 +#define TEGRA124_CLK_CLK72MHZ 177 +#define TEGRA124_CLK_VIC03 178 +/* 179 */ +#define TEGRA124_CLK_ADX1 180 +#define TEGRA124_CLK_DPAUX 181 +#define TEGRA124_CLK_SOR0 182 +/* 183 */ +#define TEGRA124_CLK_GPU 184 +#define TEGRA124_CLK_AMX1 185 +/* 186 */ +/* 187 */ +/* 188 */ +/* 189 */ +/* 190 */ +/* 191 */ +#define TEGRA124_CLK_UARTB 192 +#define TEGRA124_CLK_VFIR 193 +#define TEGRA124_CLK_SPDIF_IN 194 +#define TEGRA124_CLK_SPDIF_OUT 195 +#define TEGRA124_CLK_VI 196 +#define TEGRA124_CLK_VI_SENSOR 197 +#define TEGRA124_CLK_FUSE 198 +#define TEGRA124_CLK_FUSE_BURN 199 +#define TEGRA124_CLK_CLK_32K 200 +#define TEGRA124_CLK_CLK_M 201 +#define TEGRA124_CLK_CLK_M_DIV2 202 +#define TEGRA124_CLK_CLK_M_DIV4 203 +#define TEGRA124_CLK_PLL_REF 204 +#define TEGRA124_CLK_PLL_C 205 +#define TEGRA124_CLK_PLL_C_OUT1 206 +#define TEGRA124_CLK_PLL_C2 207 +#define TEGRA124_CLK_PLL_C3 208 +#define TEGRA124_CLK_PLL_M 209 +#define TEGRA124_CLK_PLL_M_OUT1 210 +#define TEGRA124_CLK_PLL_P 211 +#define TEGRA124_CLK_PLL_P_OUT1 212 +#define TEGRA124_CLK_PLL_P_OUT2 213 +#define TEGRA124_CLK_PLL_P_OUT3 214 +#define TEGRA124_CLK_PLL_P_OUT4 215 +#define TEGRA124_CLK_PLL_A 216 +#define TEGRA124_CLK_PLL_A_OUT0 217 +#define TEGRA124_CLK_PLL_D 218 +#define TEGRA124_CLK_PLL_D_OUT0 219 +#define TEGRA124_CLK_PLL_D2 220 +#define TEGRA124_CLK_PLL_D2_OUT0 221 +#define TEGRA124_CLK_PLL_U 222 +#define TEGRA124_CLK_PLL_U_480M 223 + +#define TEGRA124_CLK_PLL_U_60M 224 +#define TEGRA124_CLK_PLL_U_48M 225 +#define TEGRA124_CLK_PLL_U_12M 226 +#define TEGRA124_CLK_PLL_X 227 +#define TEGRA124_CLK_PLL_X_OUT0 228 +#define TEGRA124_CLK_PLL_RE_VCO 229 +#define TEGRA124_CLK_PLL_RE_OUT 230 +#define TEGRA124_CLK_PLL_E 231 +#define TEGRA124_CLK_SPDIF_IN_SYNC 232 +#define TEGRA124_CLK_I2S0_SYNC 233 +#define TEGRA124_CLK_I2S1_SYNC 234 +#define TEGRA124_CLK_I2S2_SYNC 235 +#define TEGRA124_CLK_I2S3_SYNC 236 +#define TEGRA124_CLK_I2S4_SYNC 237 +#define TEGRA124_CLK_VIMCLK_SYNC 238 +#define TEGRA124_CLK_AUDIO0 239 +#define TEGRA124_CLK_AUDIO1 240 +#define TEGRA124_CLK_AUDIO2 241 +#define TEGRA124_CLK_AUDIO3 242 +#define TEGRA124_CLK_AUDIO4 243 +#define TEGRA124_CLK_SPDIF 244 +#define TEGRA124_CLK_CLK_OUT_1 245 +#define TEGRA124_CLK_CLK_OUT_2 246 +#define TEGRA124_CLK_CLK_OUT_3 247 +#define TEGRA124_CLK_BLINK 248 +/* 249 */ +/* 250 */ +/* 251 */ +#define TEGRA124_CLK_XUSB_HOST_SRC 252 +#define TEGRA124_CLK_XUSB_FALCON_SRC 253 +#define TEGRA124_CLK_XUSB_FS_SRC 254 +#define TEGRA124_CLK_XUSB_SS_SRC 255 + +#define TEGRA124_CLK_XUSB_DEV_SRC 256 +#define TEGRA124_CLK_XUSB_DEV 257 +#define TEGRA124_CLK_XUSB_HS_SRC 258 +#define TEGRA124_CLK_SCLK 259 +#define TEGRA124_CLK_HCLK 260 +#define TEGRA124_CLK_PCLK 261 +#define TEGRA124_CLK_CCLK_G 262 +#define TEGRA124_CLK_CCLK_LP 263 +#define TEGRA124_CLK_DFLL_REF 264 +#define TEGRA124_CLK_DFLL_SOC 265 +#define TEGRA124_CLK_VI_SENSOR2 266 +#define TEGRA124_CLK_PLL_P_OUT5 267 +#define TEGRA124_CLK_CML0 268 +#define TEGRA124_CLK_CML1 269 +#define TEGRA124_CLK_PLL_C4 270 +#define TEGRA124_CLK_PLL_DP 271 +#define TEGRA124_CLK_PLL_E_MUX 272 +/* 273 */ +/* 274 */ +/* 275 */ +/* 276 */ +/* 277 */ +/* 278 */ +/* 279 */ +/* 280 */ +/* 281 */ +/* 282 */ +/* 283 */ +/* 284 */ +/* 285 */ +/* 286 */ +/* 287 */ + +/* 288 */ +/* 289 */ +/* 290 */ +/* 291 */ +/* 292 */ +/* 293 */ +/* 294 */ +/* 295 */ +/* 296 */ +/* 297 */ +/* 298 */ +/* 299 */ +#define TEGRA124_CLK_AUDIO0_MUX 300 +#define TEGRA124_CLK_AUDIO1_MUX 301 +#define TEGRA124_CLK_AUDIO2_MUX 302 +#define TEGRA124_CLK_AUDIO3_MUX 303 +#define TEGRA124_CLK_AUDIO4_MUX 304 +#define TEGRA124_CLK_SPDIF_MUX 305 +#define TEGRA124_CLK_CLK_OUT_1_MUX 306 +#define TEGRA124_CLK_CLK_OUT_2_MUX 307 +#define TEGRA124_CLK_CLK_OUT_3_MUX 308 +#define TEGRA124_CLK_DSIA_MUX 309 +#define TEGRA124_CLK_DSIB_MUX 310 +#define TEGRA124_CLK_SOR0_LVDS 311 +#define TEGRA124_CLK_CLK_MAX 312 + +#endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */ -- cgit v1.2.3 From 2edb90ae421a0f65edcdef65ef9dd08e3228abbf Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Fri, 11 Oct 2013 09:37:45 +0200 Subject: ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h This patch moves at91_pmc.h header from machine specific directory (arch/arm/mach-at91/include/mach/at91_pmc.h) to clk include directory (include/linux/clk/at91_pmc.h). We need this to avoid reference to machine specific headers in clk drivers. Signed-off-by: Boris BREZILLON Acked-by: Felipe Balbi Acked-by: Mike Turquette Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200.c | 2 +- arch/arm/mach-at91/at91sam9260.c | 2 +- arch/arm/mach-at91/at91sam9261.c | 2 +- arch/arm/mach-at91/at91sam9263.c | 2 +- arch/arm/mach-at91/at91sam9g45.c | 2 +- arch/arm/mach-at91/at91sam9n12.c | 2 +- arch/arm/mach-at91/at91sam9rl.c | 2 +- arch/arm/mach-at91/at91sam9x5.c | 2 +- arch/arm/mach-at91/clock.c | 2 +- arch/arm/mach-at91/include/mach/at91_pmc.h | 190 ----------------------------- arch/arm/mach-at91/pm.c | 2 +- arch/arm/mach-at91/pm_slowclock.S | 2 +- arch/arm/mach-at91/sama5d3.c | 2 +- arch/arm/mach-at91/setup.c | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 2 +- include/linux/clk/at91_pmc.h | 190 +++++++++++++++++++++++++++++ 16 files changed, 204 insertions(+), 204 deletions(-) delete mode 100644 arch/arm/mach-at91/include/mach/at91_pmc.h create mode 100644 include/linux/clk/at91_pmc.h (limited to 'include') diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 25805f2f6010..e47f5fd232f5 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -12,13 +12,13 @@ #include #include +#include #include #include #include #include #include -#include #include #include diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index d6a1fa85371d..6c821e562159 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,6 +11,7 @@ */ #include +#include #include #include @@ -20,7 +21,6 @@ #include #include #include -#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 23ba1d8a1531..6276b4c1acfe 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,6 +11,7 @@ */ #include +#include #include #include @@ -19,7 +20,6 @@ #include #include #include -#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 7eccb0fc57bc..37b90f4b990c 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,6 +11,7 @@ */ #include +#include #include #include @@ -18,7 +19,6 @@ #include #include #include -#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 9405aa08b104..2f455ce35268 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -12,13 +12,13 @@ #include #include +#include #include #include #include #include #include -#include #include #include "at91_aic.h" diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 388ec3aec4b9..4ef088c62eab 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -8,12 +8,12 @@ #include #include +#include #include #include #include #include -#include #include #include "board.h" diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 0750ffb7e6b1..3651517abedf 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,6 +10,7 @@ */ #include +#include #include #include @@ -19,7 +20,6 @@ #include #include #include -#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e8a2e075a1b8..3e8ec26e39dc 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -8,12 +8,12 @@ #include #include +#include #include #include #include #include -#include #include #include "board.h" diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 6b2630a92f71..5f02aea1021c 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -24,9 +24,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h deleted file mode 100644 index c604cc69acb5..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pmc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Power Management Controller (PMC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PMC_H -#define AT91_PMC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_pmc_base; - -#define at91_pmc_read(field) \ - __raw_readl(at91_pmc_base + field) - -#define at91_pmc_write(field, value) \ - __raw_writel(value, at91_pmc_base + field) -#else -.extern at91_pmc_base -#endif - -#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ -#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */ - -#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */ -#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ -#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ -#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ -#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ -#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */ -#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ -#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ - -#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */ -#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */ -#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ - -#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */ -#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ -#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ -#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ - -#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ -#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ -#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ -#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ -#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ -#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ -#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ - -#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */ -#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ -#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ - -#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */ -#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */ -#define AT91_PMC_DIV (0xff << 0) /* Divider */ -#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ -#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ -#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ -#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) -#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ -#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) -#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ -#define AT91_PMC_USBDIV_1 (0 << 28) -#define AT91_PMC_USBDIV_2 (1 << 28) -#define AT91_PMC_USBDIV_4 (2 << 28) -#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ - -#define AT91_PMC_MCKR 0x30 /* Master Clock Register */ -#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ -#define AT91_PMC_CSS_SLOW (0 << 0) -#define AT91_PMC_CSS_MAIN (1 << 0) -#define AT91_PMC_CSS_PLLA (2 << 0) -#define AT91_PMC_CSS_PLLB (3 << 0) -#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ -#define PMC_PRES_OFFSET 2 -#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET) -#define PMC_ALT_PRES_OFFSET 4 -#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */ -#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ -#define AT91RM9200_PMC_MDIV_2 (1 << 8) -#define AT91RM9200_PMC_MDIV_3 (2 << 8) -#define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ -#define AT91SAM9_PMC_MDIV_2 (1 << 8) -#define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ -#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ -#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ -#define AT91_PMC_PDIV_1 (0 << 12) -#define AT91_PMC_PDIV_2 (1 << 12) -#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ -#define AT91_PMC_PLLADIV2_OFF (0 << 12) -#define AT91_PMC_PLLADIV2_ON (1 << 12) - -#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ -#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ -#define AT91_PMC_USBS_PLLA (0 << 0) -#define AT91_PMC_USBS_UPLL (1 << 0) -#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */ -#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ -#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8) -#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8) - -#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ -#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ -#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */ -#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV) - -#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ -#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */ -#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */ -#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ -#define AT91_PMC_CSSMCK_CSS (0 << 8) -#define AT91_PMC_CSSMCK_MCK (1 << 8) - -#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */ -#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */ -#define AT91_PMC_SR 0x68 /* Status Register */ -#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ -#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ -#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ -#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ -#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */ -#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */ -#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ -#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ - -#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ -#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ -#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ -#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */ - -#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */ -#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ -#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ - -#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ -#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ -#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ - -#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ -#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ -#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ -#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ -#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ -#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 9986542e8060..d43b79f56e94 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -19,13 +19,13 @@ #include #include #include +#include #include #include #include #include -#include #include #include "at91_aic.h" diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 098c28ddf025..20018779bae7 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -13,8 +13,8 @@ */ #include +#include #include -#include #include diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 3ea86428ee09..5c6dc24fafbd 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -9,12 +9,12 @@ #include #include +#include #include #include #include #include -#include #include #include "soc.h" diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 094b3459c288..ca542dee087d 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -18,7 +19,6 @@ #include #include #include -#include #include "at91_shdwc.h" #include "soc.h" diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 2cb52e0438df..9f71d9fdcc14 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -326,7 +326,7 @@ static int vbus_is_present(struct usba_udc *udc) #if defined(CONFIG_ARCH_AT91SAM9RL) -#include +#include static void toggle_bias(int is_on) { diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h new file mode 100644 index 000000000000..00c45b3510bf --- /dev/null +++ b/include/linux/clk/at91_pmc.h @@ -0,0 +1,190 @@ +/* + * include/linux/clk/at91_pmc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Power Management Controller (PMC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PMC_H +#define AT91_PMC_H + +#ifndef __ASSEMBLY__ +extern void __iomem *at91_pmc_base; + +#define at91_pmc_read(field) \ + __raw_readl(at91_pmc_base + field) + +#define at91_pmc_write(field, value) \ + __raw_writel(value, at91_pmc_base + field) +#else +.extern at91_pmc_base +#endif + +#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ +#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */ + +#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ +#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ +#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */ +#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ +#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ + +#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ + +#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */ +#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ +#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ + +#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ +#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ +#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ + +#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */ +#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) +#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ +#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) +#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ +#define AT91_PMC_USBDIV_1 (0 << 28) +#define AT91_PMC_USBDIV_2 (1 << 28) +#define AT91_PMC_USBDIV_4 (2 << 28) +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_MCKR 0x30 /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ +#define PMC_PRES_OFFSET 2 +#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET) +#define PMC_ALT_PRES_OFFSET 4 +#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */ +#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ +#define AT91RM9200_PMC_MDIV_2 (1 << 8) +#define AT91RM9200_PMC_MDIV_3 (2 << 8) +#define AT91RM9200_PMC_MDIV_4 (3 << 8) +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ +#define AT91SAM9_PMC_MDIV_2 (1 << 8) +#define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ +#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ +#define AT91_PMC_PDIV_1 (0 << 12) +#define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ +#define AT91_PMC_PLLADIV2_OFF (0 << 12) +#define AT91_PMC_PLLADIV2_ON (1 << 12) + +#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ +#define AT91_PMC_USBS_PLLA (0 << 0) +#define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */ +#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ +#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8) +#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8) + +#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ +#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ +#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */ +#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV) + +#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */ +#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */ +#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ +#define AT91_PMC_CSSMCK_CSS (0 << 8) +#define AT91_PMC_CSSMCK_MCK (1 << 8) + +#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */ +#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */ +#define AT91_PMC_SR 0x68 /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */ +#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ +#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ + +#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ +#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ +#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ +#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */ + +#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */ +#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ +#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ + +#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ +#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ +#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ + +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ +#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ +#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ +#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ + +#endif -- cgit v1.2.3 From 7e682b44376e8caa6fc57acbf818b52747b1f922 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Fri, 11 Oct 2013 10:41:25 +0200 Subject: clk: at91: add PMC macro file for dt definitions This patch adds a new macro file for PMC macros. This macro file includes the definitions of SR (status register) bit offsets and will be use to reference PMC irqs. Signed-off-by: Boris BREZILLON Acked-by: Mike Turquette Signed-off-by: Nicolas Ferre --- include/dt-bindings/clk/at91.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/dt-bindings/clk/at91.h (limited to 'include') diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h new file mode 100644 index 000000000000..0b4cb999a3f7 --- /dev/null +++ b/include/dt-bindings/clk/at91.h @@ -0,0 +1,22 @@ +/* + * This header provides constants for AT91 pmc status. + * + * The constants defined in this header are being used in dts. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _DT_BINDINGS_CLK_AT91_H +#define _DT_BINDINGS_CLK_AT91_H + +#define AT91_PMC_MOSCS 0 /* MOSCS Flag */ +#define AT91_PMC_LOCKA 1 /* PLLA Lock */ +#define AT91_PMC_LOCKB 2 /* PLLB Lock */ +#define AT91_PMC_MCKRDY 3 /* Master Clock */ +#define AT91_PMC_LOCKU 6 /* UPLL Lock */ +#define AT91_PMC_PCKRDY(id) (8 + (id)) /* Programmable Clock */ +#define AT91_PMC_MOSCSELS 16 /* Main Oscillator Selection */ +#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */ +#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */ + +#endif -- cgit v1.2.3 From 1a748d2bc5061b72588013a720645661345c0e65 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Fri, 11 Oct 2013 10:48:26 +0200 Subject: clk: at91: add PMC pll clocks This patch adds new at91 pll clock implementation using common clk framework. The pll clock layout describe the PLLX register layout. There are four pll clock layouts: - at91rm9200 - at91sam9g20 - at91sam9g45 - sama5d3 PLL clocks are given characteristics: - min/max clock source rate - ranges of valid clock output rates - values to set in out and icpll fields for each supported output range These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON Acked-by: Mike Turquette Signed-off-by: Nicolas Ferre --- drivers/clk/at91/Makefile | 2 +- drivers/clk/at91/clk-pll.c | 537 ++++++++++++++++++++++++++++++++++++++++++ drivers/clk/at91/clk-plldiv.c | 135 +++++++++++ drivers/clk/at91/pmc.c | 21 ++ drivers/clk/at91/pmc.h | 11 + include/linux/clk/at91_pmc.h | 2 + 6 files changed, 707 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/at91/clk-pll.c create mode 100644 drivers/clk/at91/clk-plldiv.c (limited to 'include') diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile index 44105bd44aa1..902bbf1fe584 100644 --- a/drivers/clk/at91/Makefile +++ b/drivers/clk/at91/Makefile @@ -3,4 +3,4 @@ # obj-y += pmc.o -obj-y += clk-main.o +obj-y += clk-main.o clk-pll.o clk-plldiv.o diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c new file mode 100644 index 000000000000..5e23ee4ce387 --- /dev/null +++ b/drivers/clk/at91/clk-pll.c @@ -0,0 +1,537 @@ +/* + * Copyright (C) 2013 Boris BREZILLON + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pmc.h" + +#define PLL_STATUS_MASK(id) (1 << (1 + (id))) +#define PLL_REG(id) (AT91_CKGR_PLLAR + ((id) * 4)) +#define PLL_DIV_MASK 0xff +#define PLL_DIV_MAX PLL_DIV_MASK +#define PLL_DIV(reg) ((reg) & PLL_DIV_MASK) +#define PLL_MUL(reg, layout) (((reg) >> (layout)->mul_shift) & \ + (layout)->mul_mask) +#define PLL_ICPR_SHIFT(id) ((id) * 16) +#define PLL_ICPR_MASK(id) (0xffff << PLL_ICPR_SHIFT(id)) +#define PLL_MAX_COUNT 0x3ff +#define PLL_COUNT_SHIFT 8 +#define PLL_OUT_SHIFT 14 +#define PLL_MAX_ID 1 + +struct clk_pll_characteristics { + struct clk_range input; + int num_output; + struct clk_range *output; + u16 *icpll; + u8 *out; +}; + +struct clk_pll_layout { + u32 pllr_mask; + u16 mul_mask; + u8 mul_shift; +}; + +#define to_clk_pll(hw) container_of(hw, struct clk_pll, hw) + +struct clk_pll { + struct clk_hw hw; + struct at91_pmc *pmc; + unsigned int irq; + wait_queue_head_t wait; + u8 id; + u8 div; + u8 range; + u16 mul; + const struct clk_pll_layout *layout; + const struct clk_pll_characteristics *characteristics; +}; + +static irqreturn_t clk_pll_irq_handler(int irq, void *dev_id) +{ + struct clk_pll *pll = (struct clk_pll *)dev_id; + + wake_up(&pll->wait); + disable_irq_nosync(pll->irq); + + return IRQ_HANDLED; +} + +static int clk_pll_prepare(struct clk_hw *hw) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct at91_pmc *pmc = pll->pmc; + const struct clk_pll_layout *layout = pll->layout; + u8 id = pll->id; + u32 mask = PLL_STATUS_MASK(id); + int offset = PLL_REG(id); + u8 out = 0; + u32 pllr, icpr; + u8 div; + u16 mul; + + pllr = pmc_read(pmc, offset); + div = PLL_DIV(pllr); + mul = PLL_MUL(pllr, layout); + + if ((pmc_read(pmc, AT91_PMC_SR) & mask) && + (div == pll->div && mul == pll->mul)) + return 0; + + if (characteristics->out) + out = characteristics->out[pll->range]; + if (characteristics->icpll) { + icpr = pmc_read(pmc, AT91_PMC_PLLICPR) & ~PLL_ICPR_MASK(id); + icpr |= (characteristics->icpll[pll->range] << + PLL_ICPR_SHIFT(id)); + pmc_write(pmc, AT91_PMC_PLLICPR, icpr); + } + + pllr &= ~layout->pllr_mask; + pllr |= layout->pllr_mask & + (pll->div | (PLL_MAX_COUNT << PLL_COUNT_SHIFT) | + (out << PLL_OUT_SHIFT) | + ((pll->mul & layout->mul_mask) << layout->mul_shift)); + pmc_write(pmc, offset, pllr); + + while (!(pmc_read(pmc, AT91_PMC_SR) & mask)) { + enable_irq(pll->irq); + wait_event(pll->wait, + pmc_read(pmc, AT91_PMC_SR) & mask); + } + + return 0; +} + +static int clk_pll_is_prepared(struct clk_hw *hw) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct at91_pmc *pmc = pll->pmc; + + return !!(pmc_read(pmc, AT91_PMC_SR) & + PLL_STATUS_MASK(pll->id)); +} + +static void clk_pll_unprepare(struct clk_hw *hw) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct at91_pmc *pmc = pll->pmc; + const struct clk_pll_layout *layout = pll->layout; + int offset = PLL_REG(pll->id); + u32 tmp = pmc_read(pmc, offset) & ~(layout->pllr_mask); + + pmc_write(pmc, offset, tmp); +} + +static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + const struct clk_pll_layout *layout = pll->layout; + struct at91_pmc *pmc = pll->pmc; + int offset = PLL_REG(pll->id); + u32 tmp = pmc_read(pmc, offset) & layout->pllr_mask; + u8 div = PLL_DIV(tmp); + u16 mul = PLL_MUL(tmp, layout); + if (!div || !mul) + return 0; + + return (parent_rate * (mul + 1)) / div; +} + +static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate, + unsigned long parent_rate, + u32 *div, u32 *mul, + u32 *index) { + unsigned long maxrate; + unsigned long minrate; + unsigned long divrate; + unsigned long bestdiv = 1; + unsigned long bestmul; + unsigned long tmpdiv; + unsigned long roundup; + unsigned long rounddown; + unsigned long remainder; + unsigned long bestremainder; + unsigned long maxmul; + unsigned long maxdiv; + unsigned long mindiv; + int i = 0; + const struct clk_pll_layout *layout = pll->layout; + const struct clk_pll_characteristics *characteristics = + pll->characteristics; + + /* Minimum divider = 1 */ + /* Maximum multiplier = max_mul */ + maxmul = layout->mul_mask + 1; + maxrate = (parent_rate * maxmul) / 1; + + /* Maximum divider = max_div */ + /* Minimum multiplier = 2 */ + maxdiv = PLL_DIV_MAX; + minrate = (parent_rate * 2) / maxdiv; + + if (parent_rate < characteristics->input.min || + parent_rate < characteristics->input.max) + return -ERANGE; + + if (parent_rate < minrate || parent_rate > maxrate) + return -ERANGE; + + for (i = 0; i < characteristics->num_output; i++) { + if (parent_rate >= characteristics->output[i].min && + parent_rate <= characteristics->output[i].max) + break; + } + + if (i >= characteristics->num_output) + return -ERANGE; + + bestmul = rate / parent_rate; + rounddown = parent_rate % rate; + roundup = rate - rounddown; + bestremainder = roundup < rounddown ? roundup : rounddown; + + if (!bestremainder) { + if (div) + *div = bestdiv; + if (mul) + *mul = bestmul; + if (index) + *index = i; + return rate; + } + + maxdiv = 255 / (bestmul + 1); + if (parent_rate / maxdiv < characteristics->input.min) + maxdiv = parent_rate / characteristics->input.min; + mindiv = parent_rate / characteristics->input.max; + if (parent_rate % characteristics->input.max) + mindiv++; + + for (tmpdiv = mindiv; tmpdiv < maxdiv; tmpdiv++) { + divrate = parent_rate / tmpdiv; + + rounddown = rate % divrate; + roundup = divrate - rounddown; + remainder = roundup < rounddown ? roundup : rounddown; + + if (remainder < bestremainder) { + bestremainder = remainder; + bestmul = rate / divrate; + bestdiv = tmpdiv; + } + + if (!remainder) + break; + } + + rate = (parent_rate / bestdiv) * bestmul; + + if (div) + *div = bestdiv; + if (mul) + *mul = bestmul; + if (index) + *index = i; + + return rate; +} + +static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + + return clk_pll_get_best_div_mul(pll, rate, *parent_rate, + NULL, NULL, NULL); +} + +static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct at91_pmc *pmc = pll->pmc; + const struct clk_pll_layout *layout = pll->layout; + const struct clk_pll_characteristics *characteristics = + pll->characteristics; + u8 id = pll->id; + int offset = PLL_REG(id); + long ret; + u32 div; + u32 mul; + u32 index; + u32 tmp; + u8 out = 0; + + ret = clk_pll_get_best_div_mul(pll, rate, parent_rate, + &div, &mul, &index); + if (ret < 0) + return ret; + + pll->range = index; + pll->div = div; + pll->mul = mul; + + return 0; +} + +static const struct clk_ops pll_ops = { + .prepare = clk_pll_prepare, + .unprepare = clk_pll_unprepare, + .is_prepared = clk_pll_is_prepared, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_round_rate, + .set_rate = clk_pll_set_rate, +}; + +static struct clk * __init +at91_clk_register_pll(struct at91_pmc *pmc, unsigned int irq, const char *name, + const char *parent_name, u8 id, + const struct clk_pll_layout *layout, + const struct clk_pll_characteristics *characteristics) +{ + struct clk_pll *pll; + struct clk *clk = NULL; + struct clk_init_data init; + int ret; + int offset = PLL_REG(id); + u32 tmp; + + if (id > PLL_MAX_ID) + return ERR_PTR(-EINVAL); + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &pll_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = CLK_SET_RATE_GATE; + + pll->id = id; + pll->hw.init = &init; + pll->layout = layout; + pll->characteristics = characteristics; + pll->pmc = pmc; + pll->irq = irq; + tmp = pmc_read(pmc, offset) & layout->pllr_mask; + pll->div = PLL_DIV(tmp); + pll->mul = PLL_MUL(tmp, layout); + init_waitqueue_head(&pll->wait); + irq_set_status_flags(pll->irq, IRQ_NOAUTOEN); + ret = request_irq(pll->irq, clk_pll_irq_handler, IRQF_TRIGGER_HIGH, + id ? "clk-pllb" : "clk-plla", pll); + if (ret) + return ERR_PTR(ret); + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + + +static const struct clk_pll_layout at91rm9200_pll_layout = { + .pllr_mask = 0x7FFFFFF, + .mul_shift = 16, + .mul_mask = 0x7FF, +}; + +static const struct clk_pll_layout at91sam9g45_pll_layout = { + .pllr_mask = 0xFFFFFF, + .mul_shift = 16, + .mul_mask = 0xFF, +}; + +static const struct clk_pll_layout at91sam9g20_pllb_layout = { + .pllr_mask = 0x3FFFFF, + .mul_shift = 16, + .mul_mask = 0x3F, +}; + +static const struct clk_pll_layout sama5d3_pll_layout = { + .pllr_mask = 0x1FFFFFF, + .mul_shift = 18, + .mul_mask = 0x7F, +}; + + +static struct clk_pll_characteristics * __init +of_at91_clk_pll_get_characteristics(struct device_node *np) +{ + int i; + int offset; + u32 tmp; + int num_output; + u32 num_cells; + struct clk_range input; + struct clk_range *output; + u8 *out = NULL; + u16 *icpll = NULL; + struct clk_pll_characteristics *characteristics; + + if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input)) + return NULL; + + if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells", + &num_cells)) + return NULL; + + if (num_cells < 2 || num_cells > 4) + return NULL; + + if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp)) + return NULL; + num_output = tmp / (sizeof(u32) * num_cells); + + characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL); + if (!characteristics) + return NULL; + + output = kzalloc(sizeof(*output) * num_output, GFP_KERNEL); + if (!output) + goto out_free_characteristics; + + if (num_cells > 2) { + out = kzalloc(sizeof(*out) * num_output, GFP_KERNEL); + if (!out) + goto out_free_output; + } + + if (num_cells > 3) { + icpll = kzalloc(sizeof(*icpll) * num_output, GFP_KERNEL); + if (!icpll) + goto out_free_output; + } + + for (i = 0; i < num_output; i++) { + offset = i * num_cells; + if (of_property_read_u32_index(np, + "atmel,pll-clk-output-ranges", + offset, &tmp)) + goto out_free_output; + output[i].min = tmp; + if (of_property_read_u32_index(np, + "atmel,pll-clk-output-ranges", + offset + 1, &tmp)) + goto out_free_output; + output[i].max = tmp; + + if (num_cells == 2) + continue; + + if (of_property_read_u32_index(np, + "atmel,pll-clk-output-ranges", + offset + 2, &tmp)) + goto out_free_output; + out[i] = tmp; + + if (num_cells == 3) + continue; + + if (of_property_read_u32_index(np, + "atmel,pll-clk-output-ranges", + offset + 3, &tmp)) + goto out_free_output; + icpll[i] = tmp; + } + + characteristics->input = input; + characteristics->num_output = num_output; + characteristics->output = output; + characteristics->out = out; + characteristics->icpll = icpll; + return characteristics; + +out_free_output: + kfree(icpll); + kfree(out); + kfree(output); +out_free_characteristics: + kfree(characteristics); + return NULL; +} + +static void __init +of_at91_clk_pll_setup(struct device_node *np, struct at91_pmc *pmc, + const struct clk_pll_layout *layout) +{ + u32 id; + unsigned int irq; + struct clk *clk; + const char *parent_name; + const char *name = np->name; + struct clk_pll_characteristics *characteristics; + + if (of_property_read_u32(np, "reg", &id)) + return; + + parent_name = of_clk_get_parent_name(np, 0); + + of_property_read_string(np, "clock-output-names", &name); + + characteristics = of_at91_clk_pll_get_characteristics(np); + if (!characteristics) + return; + + irq = irq_of_parse_and_map(np, 0); + if (!irq) + return; + + clk = at91_clk_register_pll(pmc, irq, name, parent_name, id, layout, + characteristics); + if (IS_ERR(clk)) + goto out_free_characteristics; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); + return; + +out_free_characteristics: + kfree(characteristics); +} + +void __init of_at91rm9200_clk_pll_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + of_at91_clk_pll_setup(np, pmc, &at91rm9200_pll_layout); +} + +void __init of_at91sam9g45_clk_pll_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + of_at91_clk_pll_setup(np, pmc, &at91sam9g45_pll_layout); +} + +void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + of_at91_clk_pll_setup(np, pmc, &at91sam9g20_pllb_layout); +} + +void __init of_sama5d3_clk_pll_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + of_at91_clk_pll_setup(np, pmc, &sama5d3_pll_layout); +} diff --git a/drivers/clk/at91/clk-plldiv.c b/drivers/clk/at91/clk-plldiv.c new file mode 100644 index 000000000000..ea226562bb40 --- /dev/null +++ b/drivers/clk/at91/clk-plldiv.c @@ -0,0 +1,135 @@ +/* + * Copyright (C) 2013 Boris BREZILLON + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include + +#include "pmc.h" + +#define to_clk_plldiv(hw) container_of(hw, struct clk_plldiv, hw) + +struct clk_plldiv { + struct clk_hw hw; + struct at91_pmc *pmc; +}; + +static unsigned long clk_plldiv_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_plldiv *plldiv = to_clk_plldiv(hw); + struct at91_pmc *pmc = plldiv->pmc; + + if (pmc_read(pmc, AT91_PMC_MCKR) & AT91_PMC_PLLADIV2) + return parent_rate / 2; + + return parent_rate; +} + +static long clk_plldiv_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long div; + + if (rate > *parent_rate) + return *parent_rate; + div = *parent_rate / 2; + if (rate < div) + return div; + + if (rate - div < *parent_rate - rate) + return div; + + return *parent_rate; +} + +static int clk_plldiv_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_plldiv *plldiv = to_clk_plldiv(hw); + struct at91_pmc *pmc = plldiv->pmc; + u32 tmp; + + if (parent_rate != rate && (parent_rate / 2) != rate) + return -EINVAL; + + pmc_lock(pmc); + tmp = pmc_read(pmc, AT91_PMC_MCKR) & ~AT91_PMC_PLLADIV2; + if ((parent_rate / 2) == rate) + tmp |= AT91_PMC_PLLADIV2; + pmc_write(pmc, AT91_PMC_MCKR, tmp); + pmc_unlock(pmc); + + return 0; +} + +static const struct clk_ops plldiv_ops = { + .recalc_rate = clk_plldiv_recalc_rate, + .round_rate = clk_plldiv_round_rate, + .set_rate = clk_plldiv_set_rate, +}; + +static struct clk * __init +at91_clk_register_plldiv(struct at91_pmc *pmc, const char *name, + const char *parent_name) +{ + struct clk_plldiv *plldiv; + struct clk *clk = NULL; + struct clk_init_data init; + + plldiv = kzalloc(sizeof(*plldiv), GFP_KERNEL); + if (!plldiv) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &plldiv_ops; + init.parent_names = parent_name ? &parent_name : NULL; + init.num_parents = parent_name ? 1 : 0; + init.flags = CLK_SET_RATE_GATE; + + plldiv->hw.init = &init; + plldiv->pmc = pmc; + + clk = clk_register(NULL, &plldiv->hw); + + if (IS_ERR(clk)) + kfree(plldiv); + + return clk; +} + +static void __init +of_at91_clk_plldiv_setup(struct device_node *np, struct at91_pmc *pmc) +{ + struct clk *clk; + const char *parent_name; + const char *name = np->name; + + parent_name = of_clk_get_parent_name(np, 0); + + of_property_read_string(np, "clock-output-names", &name); + + clk = at91_clk_register_plldiv(pmc, name, parent_name); + + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); + return; +} + +void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + of_at91_clk_plldiv_setup(np, pmc); +} diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c index 3d35b7313868..5af3f2fbf45e 100644 --- a/drivers/clk/at91/pmc.c +++ b/drivers/clk/at91/pmc.c @@ -234,6 +234,27 @@ static const struct of_device_id pmc_clk_ids[] __initdata = { .compatible = "atmel,at91rm9200-clk-main", .data = of_at91rm9200_clk_main_setup, }, + /* PLL clocks */ + { + .compatible = "atmel,at91rm9200-clk-pll", + .data = of_at91rm9200_clk_pll_setup, + }, + { + .compatible = "atmel,at91sam9g45-clk-pll", + .data = of_at91sam9g45_clk_pll_setup, + }, + { + .compatible = "atmel,at91sam9g20-clk-pllb", + .data = of_at91sam9g20_clk_pllb_setup, + }, + { + .compatible = "atmel,sama5d3-clk-pll", + .data = of_sama5d3_clk_pll_setup, + }, + { + .compatible = "atmel,at91sam9x5-clk-plldiv", + .data = of_at91sam9x5_clk_plldiv_setup, + }, { /*sentinel*/ } }; diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h index 729aa46c7289..15aaf38e37c5 100644 --- a/drivers/clk/at91/pmc.h +++ b/drivers/clk/at91/pmc.h @@ -61,4 +61,15 @@ int of_at91_get_clk_range(struct device_node *np, const char *propname, extern void __init of_at91rm9200_clk_main_setup(struct device_node *np, struct at91_pmc *pmc); +extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np, + struct at91_pmc *pmc); +extern void __init of_at91sam9g45_clk_pll_setup(struct device_node *np, + struct at91_pmc *pmc); +extern void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np, + struct at91_pmc *pmc); +extern void __init of_sama5d3_clk_pll_setup(struct device_node *np, + struct at91_pmc *pmc); +extern void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np, + struct at91_pmc *pmc); + #endif /* __PMC_H_ */ diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h index 00c45b3510bf..a6911ebbd02a 100644 --- a/include/linux/clk/at91_pmc.h +++ b/include/linux/clk/at91_pmc.h @@ -164,6 +164,8 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ #define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ +#define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */ + #define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ #define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ #define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ -- cgit v1.2.3 From 8010dad55a0ab0e829f3733854e5235eef4e2734 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 26 Nov 2013 12:40:51 -0700 Subject: dma: add dma_get_any_slave_channel(), for use in of_xlate() mmp_pdma.c implements a custom of_xlate() function that is 95% identical to what Tegra will need. Create a function to implement the common part, so everyone doesn't just cut/paste the implementation. Cc: Dan Williams Cc: Vinod Koul Cc: Lars-Peter Clausen Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stephen Warren Signed-off-by: Vinod Koul --- drivers/dma/dmaengine.c | 28 ++++++++++++++++++++++++++++ drivers/dma/mmp_pdma.c | 30 +++++++----------------------- include/linux/dmaengine.h | 1 + 3 files changed, 36 insertions(+), 23 deletions(-) (limited to 'include') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index ea806bdc12ef..4f08ee8c17b4 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -535,6 +535,34 @@ struct dma_chan *dma_get_slave_channel(struct dma_chan *chan) } EXPORT_SYMBOL_GPL(dma_get_slave_channel); +struct dma_chan *dma_get_any_slave_channel(struct dma_device *device) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + int err; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* lock against __dma_request_channel */ + mutex_lock(&dma_list_mutex); + + chan = private_candidate(&mask, device, NULL, NULL); + if (chan) { + err = dma_chan_get(chan); + if (err) { + pr_debug("%s: failed to get %s: (%d)\n", + __func__, dma_chan_name(chan), err); + chan = NULL; + } + } + + mutex_unlock(&dma_list_mutex); + + return chan; +} +EXPORT_SYMBOL_GPL(dma_get_any_slave_channel); + /** * __dma_request_channel - try to allocate an exclusive channel * @mask: capabilities that the channel must satisfy diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c index dcb1e05149a7..2998f1bffac1 100644 --- a/drivers/dma/mmp_pdma.c +++ b/drivers/dma/mmp_pdma.c @@ -893,33 +893,17 @@ static struct dma_chan *mmp_pdma_dma_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma) { struct mmp_pdma_device *d = ofdma->of_dma_data; - struct dma_chan *chan, *candidate; + struct dma_chan *chan; + struct mmp_pdma_chan *c; -retry: - candidate = NULL; - - /* walk the list of channels registered with the current instance and - * find one that is currently unused */ - list_for_each_entry(chan, &d->device.channels, device_node) - if (chan->client_count == 0) { - candidate = chan; - break; - } - - if (!candidate) + chan = dma_get_any_slave_channel(&d->device); + if (!chan) return NULL; - /* dma_get_slave_channel will return NULL if we lost a race between - * the lookup and the reservation */ - chan = dma_get_slave_channel(candidate); - - if (chan) { - struct mmp_pdma_chan *c = to_mmp_pdma_chan(chan); - c->drcmr = dma_spec->args[0]; - return chan; - } + c = to_mmp_pdma_chan(chan); + c->drcmr = dma_spec->args[0]; - goto retry; + return chan; } static int mmp_pdma_probe(struct platform_device *op) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 41cf0c399288..09ef23ee8bce 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -1079,6 +1079,7 @@ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_get_slave_channel(struct dma_chan *chan); +struct dma_chan *dma_get_any_slave_channel(struct dma_device *device); struct dma_chan *net_dma_find_channel(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) #define dma_request_slave_channel_compat(mask, x, y, dev, name) \ -- cgit v1.2.3 From 80b28791ff0416a472e5a555a4b6f5f39df2fc24 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 6 Nov 2013 15:45:46 -0700 Subject: ARM: tegra: pass reset to tegra_powergate_sequence_power_up() Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren Acked-by: Bjorn Helgaas Acked-By: Terje Bergstrom Reviewed-by: Thierry Reding Acked-by: Thierry Reding --- arch/arm/mach-tegra/powergate.c | 8 +++++--- drivers/gpu/drm/tegra/gr3d.c | 6 ++++-- drivers/pci/host/pci-tegra.c | 3 ++- include/linux/tegra-powergate.h | 7 +++++-- 4 files changed, 16 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index 85d28e756bb7..f6f5b54ff95e 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -144,11 +145,12 @@ int tegra_powergate_remove_clamping(int id) } /* Must be called with clk disabled, and returns with clk enabled */ -int tegra_powergate_sequence_power_up(int id, struct clk *clk) +int tegra_powergate_sequence_power_up(int id, struct clk *clk, + struct reset_control *rst) { int ret; - tegra_periph_reset_assert(clk); + reset_control_assert(rst); ret = tegra_powergate_power_on(id); if (ret) @@ -165,7 +167,7 @@ int tegra_powergate_sequence_power_up(int id, struct clk *clk) goto err_clamp; udelay(10); - tegra_periph_reset_deassert(clk); + reset_control_deassert(rst); return 0; diff --git a/drivers/gpu/drm/tegra/gr3d.c b/drivers/gpu/drm/tegra/gr3d.c index f629e38b00e4..0cbb24b1ae04 100644 --- a/drivers/gpu/drm/tegra/gr3d.c +++ b/drivers/gpu/drm/tegra/gr3d.c @@ -279,7 +279,8 @@ static int gr3d_probe(struct platform_device *pdev) } } - err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D, gr3d->clk); + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D, gr3d->clk, + gr3d->rst); if (err < 0) { dev_err(&pdev->dev, "failed to power up 3D unit\n"); return err; @@ -287,7 +288,8 @@ static int gr3d_probe(struct platform_device *pdev) if (gr3d->clk_secondary) { err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D1, - gr3d->clk_secondary); + gr3d->clk_secondary, + gr3d->rst_secondary); if (err < 0) { dev_err(&pdev->dev, "failed to power up secondary 3D unit\n"); diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 6681c3182c85..0175041ab728 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -955,7 +955,8 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie) } err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, - pcie->pex_clk); + pcie->pex_clk, + pcie->pex_rst); if (err) { dev_err(pcie->dev, "powerup sequence failed: %d\n", err); return err; diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h index fd4498329c7c..afe442d2629a 100644 --- a/include/linux/tegra-powergate.h +++ b/include/linux/tegra-powergate.h @@ -19,6 +19,7 @@ #define _MACH_TEGRA_POWERGATE_H_ struct clk; +struct reset_control; #define TEGRA_POWERGATE_CPU 0 #define TEGRA_POWERGATE_3D 1 @@ -52,7 +53,8 @@ int tegra_powergate_power_off(int id); int tegra_powergate_remove_clamping(int id); /* Must be called with clk disabled, and returns with clk enabled */ -int tegra_powergate_sequence_power_up(int id, struct clk *clk); +int tegra_powergate_sequence_power_up(int id, struct clk *clk, + struct reset_control *rst); #else static inline int tegra_powergate_is_powered(int id) { @@ -74,7 +76,8 @@ static inline int tegra_powergate_remove_clamping(int id) return -ENOSYS; } -static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk) +static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk, + struct reset_control *rst); { return -ENOSYS; } -- cgit v1.2.3 From 2ae77527bb1a510070d039aaa22d1ae9a5807b6f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 6 Nov 2013 16:58:16 -0700 Subject: clk: tegra: remove legacy reset APIs Now that no code uses the custom Tegra module reset API, we can remove its implementation. Signed-off-by: Stephen Warren Reviewed-by: Thierry Reding Acked-By: Peter De Schrijver --- drivers/clk/tegra/clk-periph-gate.c | 22 -------------------- drivers/clk/tegra/clk-periph.c | 40 ------------------------------------- drivers/clk/tegra/clk.h | 1 - include/linux/clk/tegra.h | 7 ------- 4 files changed, 70 deletions(-) (limited to 'include') diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c index f38f33e3c65d..507015314827 100644 --- a/drivers/clk/tegra/clk-periph-gate.c +++ b/drivers/clk/tegra/clk-periph-gate.c @@ -36,8 +36,6 @@ static DEFINE_SPINLOCK(periph_ref_lock); #define read_rst(gate) \ readl_relaxed(gate->clk_base + (gate->regs->rst_reg)) -#define write_rst_set(val, gate) \ - writel_relaxed(val, gate->clk_base + (gate->regs->rst_set_reg)) #define write_rst_clr(val, gate) \ writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg)) @@ -123,26 +121,6 @@ static void clk_periph_disable(struct clk_hw *hw) spin_unlock_irqrestore(&periph_ref_lock, flags); } -void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert) -{ - if (gate->flags & TEGRA_PERIPH_NO_RESET) - return; - - if (assert) { - /* - * If peripheral is in the APB bus then read the APB bus to - * flush the write operation in apb bus. This will avoid the - * peripheral access after disabling clock - */ - if (gate->flags & TEGRA_PERIPH_ON_APB) - tegra_read_chipid(); - - write_rst_set(periph_clk_to_bit(gate), gate); - } else { - write_rst_clr(periph_clk_to_bit(gate), gate); - } -} - const struct clk_ops tegra_clk_periph_gate_ops = { .is_enabled = clk_periph_is_enabled, .enable = clk_periph_enable, diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c index d62b396863c1..c534043c0481 100644 --- a/drivers/clk/tegra/clk-periph.c +++ b/drivers/clk/tegra/clk-periph.c @@ -111,46 +111,6 @@ static void clk_periph_disable(struct clk_hw *hw) gate_ops->disable(gate_hw); } -void tegra_periph_reset_deassert(struct clk *c) -{ - struct clk_hw *hw = __clk_get_hw(c); - struct tegra_clk_periph *periph = to_clk_periph(hw); - struct tegra_clk_periph_gate *gate; - - if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) { - gate = to_clk_periph_gate(hw); - if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) { - WARN_ON(1); - return; - } - } else { - gate = &periph->gate; - } - - tegra_periph_reset(gate, 0); -} -EXPORT_SYMBOL(tegra_periph_reset_deassert); - -void tegra_periph_reset_assert(struct clk *c) -{ - struct clk_hw *hw = __clk_get_hw(c); - struct tegra_clk_periph *periph = to_clk_periph(hw); - struct tegra_clk_periph_gate *gate; - - if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) { - gate = to_clk_periph_gate(hw); - if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) { - WARN_ON(1); - return; - } - } else { - gate = &periph->gate; - } - - tegra_periph_reset(gate, 1); -} -EXPORT_SYMBOL(tegra_periph_reset_assert); - const struct clk_ops tegra_clk_periph_ops = { .get_parent = clk_periph_get_parent, .set_parent = clk_periph_set_parent, diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 07c62f997371..16ec8d6bb87f 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -393,7 +393,6 @@ struct tegra_clk_periph_gate { #define TEGRA_PERIPH_NO_DIV BIT(4) #define TEGRA_PERIPH_NO_GATE BIT(5) -void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert); extern const struct clk_ops tegra_clk_periph_gate_ops; struct clk *tegra_clk_register_periph_gate(const char *name, const char *parent_name, u8 gate_flags, void __iomem *clk_base, diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h index 23a0ceee831f..3ca9fca827a2 100644 --- a/include/linux/clk/tegra.h +++ b/include/linux/clk/tegra.h @@ -120,13 +120,6 @@ static inline void tegra_cpu_clock_resume(void) } #endif -#ifdef CONFIG_ARCH_TEGRA -void tegra_periph_reset_deassert(struct clk *c); -void tegra_periph_reset_assert(struct clk *c); -#else -static inline void tegra_periph_reset_deassert(struct clk *c) {} -static inline void tegra_periph_reset_assert(struct clk *c) {} -#endif void tegra_clocks_apply_init_table(void); #endif /* __LINUX_CLK_TEGRA_H_ */ -- cgit v1.2.3 From a85f06badc3cff4069f2f5112cea63cd39d99920 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 7 Nov 2013 10:58:21 -0700 Subject: clk: tegra: remove bogus PCIE_XCLK The "pcie_xclk" clock is not actually a clock at all, but rather a reset domain. Now that the custom Tegra module reset API has been removed, we can remove the definition of any "clocks" that existed solely to support it. Signed-off-by: Stephen Warren Reviewed-by: Thierry Reding Acked-By: Peter De Schrijver --- drivers/clk/tegra/clk-tegra20.c | 6 ------ drivers/clk/tegra/clk-tegra30.c | 7 ------- include/dt-bindings/clock/tegra20-car.h | 2 +- include/dt-bindings/clock/tegra30-car.h | 2 +- 4 files changed, 2 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 5a6a60d9443a..dbace152b2fa 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -468,7 +468,6 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "isp", .dev_id = "tegra_camera", .dt_id = TEGRA20_CLK_ISP }, { .con_id = "pex", .dt_id = TEGRA20_CLK_PEX }, { .con_id = "afi", .dt_id = TEGRA20_CLK_AFI }, - { .con_id = "pcie_xclk", .dt_id = TEGRA20_CLK_PCIE_XCLK }, { .con_id = "cdev1", .dt_id = TEGRA20_CLK_CDEV1 }, { .con_id = "cdev2", .dt_id = TEGRA20_CLK_CDEV2 }, { .con_id = "clk_32k", .dt_id = TEGRA20_CLK_CLK_32K }, @@ -834,11 +833,6 @@ static void __init tegra20_periph_clk_init(void) periph_clk_enb_refcnt); clks[TEGRA20_CLK_PEX] = clk; - /* pcie_xclk */ - clk = tegra_clk_register_periph_gate("pcie_xclk", "clk_m", 0, clk_base, - 0, 74, periph_clk_enb_refcnt); - clks[TEGRA20_CLK_PCIE_XCLK] = clk; - /* cdev1 */ clk = clk_register_fixed_rate(NULL, "cdev1_fixed", NULL, CLK_IS_ROOT, 26000000); diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index 2e47383418c8..8b10c38b6e3c 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -649,7 +649,6 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "isp", .dev_id = "tegra_camera", .dt_id = TEGRA30_CLK_ISP }, { .con_id = "pcie", .dev_id = "tegra-pcie", .dt_id = TEGRA30_CLK_PCIE }, { .con_id = "afi", .dev_id = "tegra-pcie", .dt_id = TEGRA30_CLK_AFI }, - { .con_id = "pciex", .dev_id = "tegra-pcie", .dt_id = TEGRA30_CLK_PCIEX }, { .con_id = "fuse", .dt_id = TEGRA30_CLK_FUSE }, { .con_id = "fuse_burn", .dev_id = "fuse-tegra", .dt_id = TEGRA30_CLK_FUSE_BURN }, { .con_id = "apbif", .dev_id = "tegra30-ahub", .dt_id = TEGRA30_CLK_APBIF }, @@ -1150,11 +1149,6 @@ static void __init tegra30_periph_clk_init(void) periph_clk_enb_refcnt); clks[TEGRA30_CLK_AFI] = clk; - /* pciex */ - clk = tegra_clk_register_periph_gate("pciex", "pll_e", 0, clk_base, 0, - 74, periph_clk_enb_refcnt); - clks[TEGRA30_CLK_PCIEX] = clk; - /* emc */ clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm, ARRAY_SIZE(mux_pllmcp_clkm), @@ -1395,7 +1389,6 @@ static struct tegra_clk_duplicate tegra_clk_duplicates[] = { TEGRA_CLK_DUPLICATE(TEGRA30_CLK_BSEA, "nvavp", "bsea"), TEGRA_CLK_DUPLICATE(TEGRA30_CLK_CML1, "tegra_sata_cml", NULL), TEGRA_CLK_DUPLICATE(TEGRA30_CLK_CML0, "tegra_pcie", "cml"), - TEGRA_CLK_DUPLICATE(TEGRA30_CLK_PCIEX, "tegra_pcie", "pciex"), TEGRA_CLK_DUPLICATE(TEGRA30_CLK_VCP, "nvavp", "vcp"), TEGRA_CLK_DUPLICATE(TEGRA30_CLK_CLK_MAX, NULL, NULL), /* MUST be the last entry */ }; diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h index a1ae9a8fdd6c..9406207cfac8 100644 --- a/include/dt-bindings/clock/tegra20-car.h +++ b/include/dt-bindings/clock/tegra20-car.h @@ -92,7 +92,7 @@ #define TEGRA20_CLK_OWR 71 #define TEGRA20_CLK_AFI 72 #define TEGRA20_CLK_CSITE 73 -#define TEGRA20_CLK_PCIE_XCLK 74 +/* 74 */ #define TEGRA20_CLK_AVPUCQ 75 #define TEGRA20_CLK_LA 76 /* 77 */ diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h index 22445820a929..889e49ba0aa3 100644 --- a/include/dt-bindings/clock/tegra30-car.h +++ b/include/dt-bindings/clock/tegra30-car.h @@ -92,7 +92,7 @@ #define TEGRA30_CLK_OWR 71 #define TEGRA30_CLK_AFI 72 #define TEGRA30_CLK_CSITE 73 -#define TEGRA30_CLK_PCIEX 74 +/* 74 */ #define TEGRA30_CLK_AVPUCQ 75 #define TEGRA30_CLK_LA 76 /* 77 */ -- cgit v1.2.3 From 6db201da2522d7dd231982ff7b83916cf4db3e41 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 6 Dec 2013 10:59:11 +0100 Subject: serial: sh-sci: Remove baud rate calculation algorithm 5 The algorithm isn't used, remove it. Signed-off-by: Laurent Pinchart Acked-by: Greg Kroah-Hartman Signed-off-by: Simon Horman --- drivers/tty/serial/sh-sci.c | 2 -- include/linux/serial_sci.h | 1 - 2 files changed, 3 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e98a217e2fc0..eb59bb235a52 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1825,8 +1825,6 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, return (((freq * 2) + 16 * bps) / (16 * bps) - 1); case SCBRR_ALGO_4: return (((freq * 2) + 16 * bps) / (32 * bps) - 1); - case SCBRR_ALGO_5: - return (((freq * 1000 / 32) / bps) - 1); } /* Warn, but use a safe default */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 50fe651da965..babc5fe070b9 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -15,7 +15,6 @@ enum { SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */ SCBRR_ALGO_3, /* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */ SCBRR_ALGO_4, /* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */ - SCBRR_ALGO_5, /* (((clk * 1000 / 32) / bps) - 1) */ SCBRR_ALGO_6, /* HSCIF variable sample rate algorithm */ }; -- cgit v1.2.3 From 6557b1f69ea0961efde7ab33bfe0cb7e3bfed54e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 6 Dec 2013 10:59:12 +0100 Subject: serial: sh-sci: Simplify baud rate calculation algorithms Rewrite the baud rate register value calculations in easier to read forms. The computed value isn't modified. Signed-off-by: Laurent Pinchart Acked-by: Greg Kroah-Hartman Signed-off-by: Simon Horman --- drivers/tty/serial/sh-sci.c | 8 ++++---- include/linux/serial_sci.h | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index eb59bb235a52..f2fad4d8eb9e 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1818,13 +1818,13 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, { switch (algo_id) { case SCBRR_ALGO_1: - return ((freq + 16 * bps) / (16 * bps) - 1); + return freq / (16 * bps); case SCBRR_ALGO_2: - return ((freq + 16 * bps) / (32 * bps) - 1); + return DIV_ROUND_CLOSEST(freq, 32 * bps) - 1; case SCBRR_ALGO_3: - return (((freq * 2) + 16 * bps) / (16 * bps) - 1); + return freq / (8 * bps); case SCBRR_ALGO_4: - return (((freq * 2) + 16 * bps) / (32 * bps) - 1); + return DIV_ROUND_CLOSEST(freq, 16 * bps) - 1; } /* Warn, but use a safe default */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index babc5fe070b9..12cf50c1c047 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -11,10 +11,10 @@ #define SCIx_NOT_SUPPORTED (-1) enum { - SCBRR_ALGO_1, /* ((clk + 16 * bps) / (16 * bps) - 1) */ - SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */ - SCBRR_ALGO_3, /* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */ - SCBRR_ALGO_4, /* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */ + SCBRR_ALGO_1, /* clk / (16 * bps) */ + SCBRR_ALGO_2, /* DIV_ROUND_CLOSEST(clk, 32 * bps) - 1 */ + SCBRR_ALGO_3, /* clk / (8 * bps) */ + SCBRR_ALGO_4, /* DIV_ROUND_CLOSEST(clk, 16 * bps) - 1 */ SCBRR_ALGO_6, /* HSCIF variable sample rate algorithm */ }; -- cgit v1.2.3 From 1fcc91a607de0bf72d3a6073dfe459f7e9145ac5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 6 Dec 2013 10:59:16 +0100 Subject: serial: sh-sci: Support resources passed through platform resources Memory and IRQ resources are currently passed to the driver through platform data. Support passing them through the standard platform resources mechanism instead. This deprecates platform data resources. Signed-off-by: Laurent Pinchart Acked-by: Greg Kroah-Hartman Signed-off-by: Simon Horman --- drivers/tty/serial/sh-sci.c | 65 ++++++++++++++++++++++++++++++++++----------- include/linux/serial_sci.h | 8 +++--- 2 files changed, 53 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index b3d0e00ecedf..e9c6e2339884 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -74,6 +74,7 @@ struct sci_port { /* Function clock */ struct clk *fclk; + int irqs[SCIx_NR_IRQS]; char *irqstr[SCIx_NR_IRQS]; char *gpiostr[SCIx_NR_FNS]; @@ -1079,19 +1080,19 @@ static int sci_request_irq(struct sci_port *port) for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { struct sci_irq_desc *desc; - unsigned int irq; + int irq; if (SCIx_IRQ_IS_MUXED(port)) { i = SCIx_MUX_IRQ; irq = up->irq; } else { - irq = port->cfg->irqs[i]; + irq = port->irqs[i]; /* * Certain port types won't support all of the * available interrupt sources. */ - if (unlikely(!irq)) + if (unlikely(irq < 0)) continue; } @@ -1116,7 +1117,7 @@ static int sci_request_irq(struct sci_port *port) out_noirq: while (--i >= 0) - free_irq(port->cfg->irqs[i], port); + free_irq(port->irqs[i], port); out_nomem: while (--j >= 0) @@ -1134,16 +1135,16 @@ static void sci_free_irq(struct sci_port *port) * IRQ first. */ for (i = 0; i < SCIx_NR_IRQS; i++) { - unsigned int irq = port->cfg->irqs[i]; + int irq = port->irqs[i]; /* * Certain port types won't support all of the available * interrupt sources. */ - if (unlikely(!irq)) + if (unlikely(irq < 0)) continue; - free_irq(port->cfg->irqs[i], port); + free_irq(port->irqs[i], port); kfree(port->irqstr[i]); if (SCIx_IRQ_IS_MUXED(port)) { @@ -1659,7 +1660,7 @@ static void rx_timer_fn(unsigned long arg) if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { scr &= ~0x4000; - enable_irq(s->cfg->irqs[1]); + enable_irq(s->irqs[SCIx_RXI_IRQ]); } serial_port_out(port, SCSCR, scr | SCSCR_RIE); dev_dbg(port->dev, "DMA Rx timed out\n"); @@ -2150,11 +2151,12 @@ static struct uart_ops sci_uart_ops = { }; static int sci_init_single(struct platform_device *dev, - struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) + struct sci_port *sci_port, unsigned int index, + struct plat_sci_port *p, bool early) { struct uart_port *port = &sci_port->port; + const struct resource *res; + unsigned int i; int ret; sci_port->cfg = p; @@ -2163,6 +2165,38 @@ static int sci_init_single(struct platform_device *dev, port->iotype = UPIO_MEM; port->line = index; + if (dev->num_resources) { + /* Device has resources, use them. */ + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) + return -ENOMEM; + + port->mapbase = res->start; + + for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) + sci_port->irqs[i] = platform_get_irq(dev, i); + + /* The SCI generates several interrupts. They can be muxed + * together or connected to different interrupt lines. In the + * muxed case only one interrupt resource is specified. In the + * non-muxed case three or four interrupt resources are + * specified, as the BRI interrupt is optional. + */ + if (sci_port->irqs[0] < 0) + return -ENXIO; + + if (sci_port->irqs[1] < 0) { + sci_port->irqs[1] = sci_port->irqs[0]; + sci_port->irqs[2] = sci_port->irqs[0]; + sci_port->irqs[3] = sci_port->irqs[0]; + } + } else { + /* No resources, use old-style platform data. */ + port->mapbase = p->mapbase; + for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) + sci_port->irqs[i] = p->irqs[i] ? p->irqs[i] : -ENXIO; + } + switch (p->type) { case PORT_SCIFB: port->fifosize = 256; @@ -2187,7 +2221,7 @@ static int sci_init_single(struct platform_device *dev, return ret; } - if (dev) { + if (!early) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); if (IS_ERR(sci_port->iclk)) { sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); @@ -2242,7 +2276,6 @@ static int sci_init_single(struct platform_device *dev, p->error_mask |= (1 << p->overrun_bit); } - port->mapbase = p->mapbase; port->type = p->type; port->flags = UPF_FIXED_PORT | p->flags; port->regshift = p->regshift; @@ -2254,7 +2287,7 @@ static int sci_init_single(struct platform_device *dev, * * For the muxed case there's nothing more to do. */ - port->irq = p->irqs[SCIx_RXI_IRQ]; + port->irq = sci_port->irqs[SCIx_RXI_IRQ]; port->irqflags = 0; port->serial_in = sci_serial_in; @@ -2386,7 +2419,7 @@ static int sci_probe_earlyprintk(struct platform_device *pdev) early_serial_console.index = pdev->id; - sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg); + sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true); serial_console_setup(&early_serial_console, early_serial_buf); @@ -2453,7 +2486,7 @@ static int sci_probe_single(struct platform_device *dev, return -EINVAL; } - ret = sci_init_single(dev, sciport, index, p); + ret = sci_init_single(dev, sciport, index, p, false); if (ret) return ret; diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 12cf50c1c047..42620f1dce82 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -107,10 +107,10 @@ enum { } #define SCIx_IRQ_IS_MUXED(port) \ - ((port)->cfg->irqs[SCIx_ERI_IRQ] == \ - (port)->cfg->irqs[SCIx_RXI_IRQ]) || \ - ((port)->cfg->irqs[SCIx_ERI_IRQ] && \ - !(port)->cfg->irqs[SCIx_RXI_IRQ]) + ((port)->irqs[SCIx_ERI_IRQ] == \ + (port)->irqs[SCIx_RXI_IRQ]) || \ + ((port)->irqs[SCIx_ERI_IRQ] && \ + ((port)->irqs[SCIx_RXI_IRQ] < 0)) /* * SCI register subset common for all port types. * Not all registers will exist on all parts. -- cgit v1.2.3 From 3ae988d97b160c07463b980ccf26ed9226660fef Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 6 Dec 2013 10:59:17 +0100 Subject: serial: sh-sci: Move overrun_bit and error_mask fields out of pdata None of the fields is ever set by board code, and both of them are set in the driver at probe time. Move them out of struct plat_sci_port to struct sci_port. Signed-off-by: Laurent Pinchart Acked-by: Greg Kroah-Hartman Signed-off-by: Simon Horman --- drivers/tty/serial/sh-sci.c | 50 +++++++++++++++++++++------------------------ drivers/tty/serial/sh-sci.h | 2 +- include/linux/serial_sci.h | 3 --- 3 files changed, 24 insertions(+), 31 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e9c6e2339884..98b8e3c98586 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -64,6 +64,9 @@ struct sci_port { /* Platform configuration */ struct plat_sci_port *cfg; + int overrun_bit; + unsigned int error_mask; + /* Break timer */ struct timer_list break_timer; @@ -760,19 +763,15 @@ static int sci_handle_errors(struct uart_port *port) struct tty_port *tport = &port->state->port; struct sci_port *s = to_sci_port(port); - /* - * Handle overruns, if supported. - */ - if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { - if (status & (1 << s->cfg->overrun_bit)) { - port->icount.overrun++; + /* Handle overruns */ + if (status & (1 << s->overrun_bit)) { + port->icount.overrun++; - /* overrun error */ - if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) - copied++; + /* overrun error */ + if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) + copied++; - dev_notice(port->dev, "overrun error"); - } + dev_notice(port->dev, "overrun error"); } if (status & SCxSR_FER(port)) { @@ -834,7 +833,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port) if (!reg->size) return 0; - if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { + if ((serial_port_in(port, SCLSR) & (1 << s->overrun_bit))) { serial_port_out(port, SCLSR, 0); port->icount.overrun++; @@ -2253,28 +2252,25 @@ static int sci_init_single(struct platform_device *dev, /* * Establish some sensible defaults for the error detection. */ - if (!p->error_mask) - p->error_mask = (p->type == PORT_SCI) ? + sci_port->error_mask = (p->type == PORT_SCI) ? SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; /* * Establish sensible defaults for the overrun detection, unless * the part has explicitly disabled support for it. */ - if (p->overrun_bit != SCIx_NOT_SUPPORTED) { - if (p->type == PORT_SCI) - p->overrun_bit = 5; - else if (p->scbrr_algo_id == SCBRR_ALGO_4) - p->overrun_bit = 9; - else - p->overrun_bit = 0; + if (p->type == PORT_SCI) + sci_port->overrun_bit = 5; + else if (p->scbrr_algo_id == SCBRR_ALGO_4) + sci_port->overrun_bit = 9; + else + sci_port->overrun_bit = 0; - /* - * Make the error mask inclusive of overrun detection, if - * supported. - */ - p->error_mask |= (1 << p->overrun_bit); - } + /* + * Make the error mask inclusive of overrun detection, if + * supported. + */ + sci_port->error_mask |= 1 << sci_port->overrun_bit; port->type = p->type; port->flags = UPF_FIXED_PORT | p->flags; diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 5aca7364634c..d5db81a0a430 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -9,7 +9,7 @@ #define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) #define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) -#define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask) +#define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask) #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 42620f1dce82..af9834bc6771 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -152,9 +152,6 @@ struct plat_sci_port { /* * Platform overrides if necessary, defaults otherwise. */ - int overrun_bit; - unsigned int error_mask; - int port_reg; unsigned char regshift; unsigned char regtype; -- cgit v1.2.3 From 520402bbc6fe328ae28e08bfc87a2b1eb7f10b2c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 6 Dec 2013 10:59:18 +0100 Subject: serial: sh-sci: Remove unused GPIO request code The driver requests at initialization time GPIOs passed through platform data. No platform makes use of this feature, remove it. Signed-off-by: Laurent Pinchart Acked-by: Greg Kroah-Hartman Signed-off-by: Simon Horman --- drivers/tty/serial/sh-sci.c | 67 --------------------------------------------- include/linux/serial_sci.h | 12 -------- 2 files changed, 79 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 98b8e3c98586..99a64fd16d46 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -79,7 +78,6 @@ struct sci_port { int irqs[SCIx_NR_IRQS]; char *irqstr[SCIx_NR_IRQS]; - char *gpiostr[SCIx_NR_FNS]; struct dma_chan *chan_tx; struct dma_chan *chan_rx; @@ -1153,67 +1151,6 @@ static void sci_free_irq(struct sci_port *port) } } -static const char *sci_gpio_names[SCIx_NR_FNS] = { - "sck", "rxd", "txd", "cts", "rts", -}; - -static const char *sci_gpio_str(unsigned int index) -{ - return sci_gpio_names[index]; -} - -static void sci_init_gpios(struct sci_port *port) -{ - struct uart_port *up = &port->port; - int i; - - if (!port->cfg) - return; - - for (i = 0; i < SCIx_NR_FNS; i++) { - const char *desc; - int ret; - - if (!port->cfg->gpios[i]) - continue; - - desc = sci_gpio_str(i); - - port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s", - dev_name(up->dev), desc); - - /* - * If we've failed the allocation, we can still continue - * on with a NULL string. - */ - if (!port->gpiostr[i]) - dev_notice(up->dev, "%s string allocation failure\n", - desc); - - ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]); - if (unlikely(ret != 0)) { - dev_notice(up->dev, "failed %s gpio request\n", desc); - - /* - * If we can't get the GPIO for whatever reason, - * no point in keeping the verbose string around. - */ - kfree(port->gpiostr[i]); - } - } -} - -static void sci_free_gpios(struct sci_port *port) -{ - int i; - - for (i = 0; i < SCIx_NR_FNS; i++) - if (port->cfg->gpios[i]) { - gpio_free(port->cfg->gpios[i]); - kfree(port->gpiostr[i]); - } -} - static unsigned int sci_tx_empty(struct uart_port *port) { unsigned short status = serial_port_in(port, SCxSR); @@ -2240,8 +2177,6 @@ static int sci_init_single(struct platform_device *dev, port->dev = &dev->dev; - sci_init_gpios(sci_port); - pm_runtime_enable(&dev->dev); } @@ -2298,8 +2233,6 @@ static int sci_init_single(struct platform_device *dev, static void sci_cleanup_single(struct sci_port *port) { - sci_free_gpios(port); - clk_put(port->iclk); clk_put(port->fclk); diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index af9834bc6771..e9c3021a37ae 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -69,17 +69,6 @@ enum { SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ }; -/* Offsets into the sci_port->gpios array */ -enum { - SCIx_SCK, - SCIx_RXD, - SCIx_TXD, - SCIx_CTS, - SCIx_RTS, - - SCIx_NR_FNS, -}; - enum { SCIx_PROBE_REGTYPE, @@ -141,7 +130,6 @@ struct plat_sci_port_ops { struct plat_sci_port { unsigned long mapbase; /* resource base */ unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */ - unsigned int gpios[SCIx_NR_FNS]; /* SCK, RXD, TXD, CTS, RTS */ unsigned int type; /* SCI / SCIF / IRDA / HSCIF */ upf_t flags; /* UPF_* flags */ unsigned long capabilities; /* Port features/capabilities */ -- cgit v1.2.3 From ec09c5eb491834d4011c72538e58d8b7096076bd Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 6 Dec 2013 10:59:20 +0100 Subject: serial: sh-sci: Rework baud rate calculation Computing the baud rate register value requires knowledge of the hardware sampling rate. This information is currently encoded in a baud rate calculation algorithm ID passed through platform data. However, it can be derived from the port type directly in most cases. Compute the sampling rate internally in the driver if the baud rate calculation algorithm ID isn't specified, and allow platforms to override the sampling rate through platform data in special cases (this is only required for SCIFA ports on sh7723 and sh7724, the reason needs to be investigated). Signed-off-by: Laurent Pinchart Acked-by: Greg Kroah-Hartman Signed-off-by: Simon Horman --- drivers/tty/serial/sh-sci.c | 37 ++++++++++++++++++++++++++++++------- include/linux/serial_sci.h | 2 ++ 2 files changed, 32 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index d5239d5ff98b..e4bf0e435af6 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -65,6 +65,7 @@ struct sci_port { struct plat_sci_port *cfg; int overrun_bit; unsigned int error_mask; + unsigned int sampling_rate; /* Break timer */ @@ -1750,10 +1751,13 @@ static void sci_shutdown(struct uart_port *port) sci_free_irq(s); } -static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, +static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps, unsigned long freq) { - switch (algo_id) { + if (s->sampling_rate) + return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1; + + switch (s->cfg->scbrr_algo_id) { case SCBRR_ALGO_1: return freq / (16 * bps); case SCBRR_ALGO_2: @@ -1843,12 +1847,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, max_baud); if (likely(baud && port->uartclk)) { - if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) { + if (s->cfg->type == PORT_HSCIF) { sci_baud_calc_hscif(baud, port->uartclk, &t, &srr, &cks); } else { - t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, - port->uartclk); + t = sci_scbrr_calc(s, baud, port->uartclk); for (cks = 0; t >= 256 && cks <= 3; cks++) t >>= 2; } @@ -2092,6 +2095,7 @@ static int sci_init_single(struct platform_device *dev, { struct uart_port *port = &sci_port->port; const struct resource *res; + unsigned int sampling_rate; unsigned int i; int ret; @@ -2143,28 +2147,47 @@ static int sci_init_single(struct platform_device *dev, case PORT_SCIFB: port->fifosize = 256; sci_port->overrun_bit = 9; + sampling_rate = 16; break; case PORT_HSCIF: port->fifosize = 128; + sampling_rate = 0; sci_port->overrun_bit = 0; break; case PORT_SCIFA: port->fifosize = 64; sci_port->overrun_bit = 9; + sampling_rate = 16; break; case PORT_SCIF: port->fifosize = 16; - if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) + if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) { sci_port->overrun_bit = 9; - else + sampling_rate = 16; + } else { sci_port->overrun_bit = 0; + sampling_rate = 32; + } break; default: port->fifosize = 1; sci_port->overrun_bit = 5; + sampling_rate = 32; break; } + /* Set the sampling rate if the baud rate calculation algorithm isn't + * specified. + */ + if (p->scbrr_algo_id == SCBRR_ALGO_NONE) { + /* SCIFA on sh7723 and sh7724 need a custom sampling rate that + * doesn't match the SoC datasheet, this should be investigated. + * Let platform data override the sampling rate for now. + */ + sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate + : sampling_rate; + } + if (!early) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); if (IS_ERR(sci_port->iclk)) { diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index e9c3021a37ae..af414e1895a5 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -11,6 +11,7 @@ #define SCIx_NOT_SUPPORTED (-1) enum { + SCBRR_ALGO_NONE, /* Compute sampling rate in the driver */ SCBRR_ALGO_1, /* clk / (16 * bps) */ SCBRR_ALGO_2, /* DIV_ROUND_CLOSEST(clk, 32 * bps) - 1 */ SCBRR_ALGO_3, /* clk / (8 * bps) */ @@ -134,6 +135,7 @@ struct plat_sci_port { upf_t flags; /* UPF_* flags */ unsigned long capabilities; /* Port features/capabilities */ + unsigned int sampling_rate; unsigned int scbrr_algo_id; /* SCBRR calculation algo */ unsigned int scscr; /* SCSCR initialization */ -- cgit v1.2.3