| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The NCT3015Y-R and NCT3018Y-R use the same datasheet
but have different topologies as follows.
- Topology (Only 1st i2c can set TWO bit and HF bit)
In NCT3015Y-R,
rtc 1st i2c is connected to a host CPU
rtc 2nd i2c is connected to a BMC
In NCT3018Y-R,
rtc 1st i2c is connected to a BMC
rtc 2nd i2c is connected to a host CPU
In order to be compatible with NCT3015Y-R and NCT3018Y-R,
- In probe,
If part number is NCT3018Y-R, only set HF bit to 24-Hour format.
Else, do nothing
- In set_time,
If part number is NCT3018Y-R && TWO bit is 0,
change TWO bit to 1, and restore TWO bit after updating time.
Signed-off-by: Mia Lin <mimi05633@gmail.com>
Link: https://lore.kernel.org/r/20231113103807.1036978-2-mimi05633@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Replace dev_err()->dev_err_probe() to simpilfy probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105145344.204453-4-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Replace of_match_node()->device_get_match_data() for
the data associated with device match.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105145344.204453-3-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
On some platforms (eg: RZ/{G2UL,Five} SMARC EVK), there is no IRQ
populated by default. Add irq optional support.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105145344.204453-2-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Clang warns (or errors with CONFIG_WERROR=y):
drivers/rtc/rtc-max31335.c:211:36: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
211 | if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB)
| ^ ~~~~~~~~~~~~~~~~~~~~~~
drivers/rtc/rtc-max31335.c:211:36: note: use '|' for a bitwise operation
211 | if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB)
| ^~
| |
1 error generated.
This clearly should be a comparison against reg. Fix the comparison so
that max31335_volatile_reg() does not always return true.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1980
Fixes: dedaf03b99d6 ("rtc: max31335: add driver support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240117-rtc-max3133-fix-comparison-v1-1-91e98b29d564@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Simplify the IRQ handler by using regmap_update_bits_check.
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20240115232215.273374-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
There is no race condition when accessing MAX31335_STATUS1 because it is
always about clearing the alarm interrupt bit.
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20240115232215.273374-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When a queue is unbound from the vfio_ap device driver, it is reset to
ensure its crypto data is not leaked when it is bound to another device
driver. If the queue is unbound due to the fact that the adapter or domain
was removed from the host's AP configuration, then attempting to reset it
will fail with response code 01 (APID not valid) getting returned from the
reset command. Let's ensure that the queue is assigned to the host's
configuration before resetting it.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: eeb386aeb5b7 ("s390/vfio-ap: handle config changed and scan complete notification")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-7-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When a queue is unbound from the vfio_ap device driver, if that queue is
assigned to a guest's AP configuration, its associated adapter is removed
because queues are defined to a guest via a matrix of adapters and
domains; so, it is not possible to remove a single queue.
If an adapter is removed from the guest's AP configuration, all associated
queues must be reset to prevent leaking crypto data should any of them be
assigned to a different guest or device driver. The one caveat is that if
the queue is being removed because the adapter or domain has been removed
from the host's AP configuration, then an attempt to reset the queue will
fail with response code 01, AP-queue number not valid; so resetting these
queues should be skipped.
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Fixes: 09d31ff78793 ("s390/vfio-ap: hot plug/unplug of AP devices when probed/removed")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-6-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When filtering the adapters from the configuration profile for a guest to
create or update a guest's AP configuration, if the APID of an adapter and
the APQI of a domain identify a queue device that is not bound to the
vfio_ap device driver, the APID of the adapter will be filtered because an
individual APQN can not be filtered due to the fact the APQNs are assigned
to an AP configuration as a matrix of APIDs and APQIs. Consequently, a
guest will not have access to all of the queues associated with the
filtered adapter. If the queues are subsequently made available again to
the guest, they should re-appear in a reset state; so, let's make sure all
queues associated with an adapter unplugged from the guest are reset.
In order to identify the set of queues that need to be reset, let's allow a
vfio_ap_queue object to be simultaneously stored in both a hashtable and a
list: A hashtable used to store all of the queues assigned
to a matrix mdev; and/or, a list used to store a subset of the queues that
need to be reset. For example, when an adapter is hot unplugged from a
guest, all guest queues associated with that adapter must be reset. Since
that may be a subset of those assigned to the matrix mdev, they can be
stored in a list that can be passed to the vfio_ap_mdev_reset_queues
function.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-5-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
guest's APCB
When adapters and/or domains are added to the host's AP configuration, this
may result in multiple queue devices getting created and probed by the
vfio_ap device driver. For each queue device probed, the matrix of adapters
and domains assigned to a matrix mdev will be filtered to update the
guest's APCB. If any adapters or domains get added to or removed from the
APCB, the guest's AP configuration will be dynamically updated (i.e., hot
plug/unplug). To dynamically update the guest's configuration, its VCPUs
must be taken out of SIE for the period of time it takes to make the
update. This is disruptive to the guest's operation and if there are many
queues probed due to a change in the host's AP configuration, this could be
troublesome. The problem is exacerbated by the fact that the
'on_scan_complete' callback also filters the mdev's matrix and updates
the guest's AP configuration.
In order to reduce the potential amount of disruption to the guest that may
result from a change to the host's AP configuration, let's bypass the
filtering of the matrix and updating of the guest's AP configuration in the
probe callback - if due to a host config change - and defer it until the
'on_scan_complete' callback is invoked after the AP bus finishes its device
scan operation. This way the filtering and updating will be performed only
once regardless of the number of queues added.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-4-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
While filtering the mdev matrix, it doesn't make sense - and will have
unexpected results - to filter an APID from the matrix if the APID or one
of the associated APQIs is not in the host's AP configuration. There are
two reasons for this:
1. An adapter or domain that is not in the host's AP configuration can be
assigned to the matrix; this is known as over-provisioning. Queue
devices, however, are only created for adapters and domains in the
host's AP configuration, so there will be no queues associated with an
over-provisioned adapter or domain to filter.
2. The adapter or domain may have been externally removed from the host's
configuration via an SE or HMC attached to a DPM enabled LPAR. In this
case, the vfio_ap device driver would have been notified by the AP bus
via the on_config_changed callback and the adapter or domain would
have already been filtered.
Since the matrix_mdev->shadow_apcb.apm and matrix_mdev->shadow_apcb.aqm are
copied from the mdev matrix sans the APIDs and APQIs not in the host's AP
configuration, let's loop over those bitmaps instead of those assigned to
the matrix.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-3-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or
domain is assigned to the mdev. The purpose of the function is to update
the guest's AP configuration by filtering the matrix of adapters and
domains assigned to the mdev. When an adapter or domain is assigned, only
the APQNs associated with the APID of the new adapter or APQI of the new
domain are inspected. If an APQN does not reference a queue device bound to
the vfio_ap device driver, then it's APID will be filtered from the mdev's
matrix when updating the guest's AP configuration.
Inspecting only the APID of the new adapter or APQI of the new domain will
result in passing AP queues through to a guest that are not bound to the
vfio_ap device driver under certain circumstances. Consider the following:
guest's AP configuration (all also assigned to the mdev's matrix):
14.0004
14.0005
14.0006
16.0004
16.0005
16.0006
unassign domain 4
unbind queue 16.0005
assign domain 4
When domain 4 is re-assigned, since only domain 4 will be inspected, the
APQNs that will be examined will be:
14.0004
16.0004
Since both of those APQNs reference queue devices that are bound to the
vfio_ap device driver, nothing will get filtered from the mdev's matrix
when updating the guest's AP configuration. Consequently, queue 16.0005
will get passed through despite not being bound to the driver. This
violates the linux device model requirement that a guest shall only be
given access to devices bound to the device driver facilitating their
pass-through.
To resolve this problem, every adapter and domain assigned to the mdev will
be inspected when filtering the mdev's matrix.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-2-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Thank you Wenjia for your support, welcome Thorsten!
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Acked-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This reverts commits 1979a2807547 ("gpiolib: replace the GPIO device
mutex with a read-write semaphore") and 65a828bab158 ("gpiolib: use
a mutex to protect the list of GPIO devices").
Unfortunately the legacy GPIO API that's still used in older code has to
translate numbers from the global GPIO numberspace to descriptors. This
results in a GPIO device lookup in every call to legacy functions. Some
of those functions - like gpio_set/get_value() - can be called from
atomic context so taking a sleeping lock that is an RW semaphore results
in an error.
We'll probably have to protect this list with SRCU.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/f7b5ff1e-8f34-4d98-a7be-b826cb897dc8@moroto.mountain/
Fixes: 1979a2807547 ("gpiolib: replace the GPIO device mutex with a read-write semaphore")
Fixes: 65a828bab158 ("gpiolib: use a mutex to protect the list of GPIO devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
[1] https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://lore.kernel.org/linux-trace-kernel/20240115181658.4562-1-erick.archer@gmx.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The original eventfs code added a wrapper around the dcache_readdir open
callback and created all the dentries and inodes at open, and increment
their ref count. A wrapper was added around the dcache_readdir release
function to decrement all the ref counts of those created inodes and
dentries. But this proved to be buggy[1] for when a kprobe was created
during a dir read, it would create a dentry between the open and the
release, and because the release would decrement all ref counts of all
files and directories, that would include the kprobe directory that was
not there to have its ref count incremented in open. This would cause the
ref count to go to negative and later crash the kernel.
To solve this, the dentries and inodes that were created and had their ref
count upped in open needed to be saved. That list needed to be passed from
the open to the release, so that the release would only decrement the ref
counts of the entries that were incremented in the open.
Unfortunately, the dcache_readdir logic was already using the
file->private_data, which is the only field that can be used to pass
information from the open to the release. What was done was the eventfs
created another descriptor that had a void pointer to save the
dcache_readdir pointer, and it wrapped all the callbacks, so that it could
save the list of entries that had their ref counts incremented in the
open, and pass it to the release. The wrapped callbacks would just put
back the dcache_readdir pointer and call the functions it used so it could
still use its data[2].
But Linus had an issue with the "hijacking" of the file->private_data
(unfortunately this discussion was on a security list, so no public link).
Which we finally agreed on doing everything within the iterate_shared
callback and leave the dcache_readdir out of it[3]. All the information
needed for the getents() could be created then.
But this ended up being buggy too[4]. The iterate_shared callback was not
the right place to create the dentries and inodes. Even Christian Brauner
had issues with that[5].
An attempt was to go back to creating the inodes and dentries at
the open, create an array to store the information in the
file->private_data, and pass that information to the other callbacks.[6]
The difference between that and the original method, is that it does not
use dcache_readdir. It also does not up the ref counts of the dentries and
pass them. Instead, it creates an array of a structure that saves the
dentry's name and inode number. That information is used in the
iterate_shared callback, and the array is freed in the dir release. The
dentries and inodes created in the open are not used for the iterate_share
or release callbacks. Just their names and inode numbers.
Linus did not like that either[7] and just wanted to remove the dentries
being created in iterate_shared and use the hard coded inode numbers.
[ All this while Linus enjoyed an unexpected vacation during the merge
window due to lack of power. ]
[1] https://lore.kernel.org/linux-trace-kernel/20230919211804.230edf1e@gandalf.local.home/
[2] https://lore.kernel.org/linux-trace-kernel/20230922163446.1431d4fa@gandalf.local.home/
[3] https://lore.kernel.org/linux-trace-kernel/20240104015435.682218477@goodmis.org/
[4] https://lore.kernel.org/all/202401152142.bfc28861-oliver.sang@intel.com/
[5] https://lore.kernel.org/all/20240111-unzahl-gefegt-433acb8a841d@brauner/
[6] https://lore.kernel.org/all/20240116114711.7e8637be@gandalf.local.home/
[7] https://lore.kernel.org/all/20240116170154.5bf0a250@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240116211353.573784051@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Fixes: 493ec81a8fb8 ("eventfs: Stop using dcache_readdir() for getdents()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401152142.bfc28861-oliver.sang@intel.com
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dentries and inodes are created in the readdir for the sole purpose of
getting a consistent inode number. Linus stated that is unnecessary, and
that all inodes can have the same inode number. For a virtual file system
they are pretty meaningless.
Instead use a single unique inode number for all files and one for all
directories.
Link: https://lore.kernel.org/all/20240116133753.2808d45e@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240116211353.412180363@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Barnabás reported that the change to skip the getid command
when the controller is in translated mode on laptops caused
the Version field of his "AT Translated Set 2 keyboard"
input device to change from ab83 to abba, breaking a custom
hwdb entry for this keyboard.
Use the standard ab83 id for keyboards when getid is skipped
(rather then that getid fails) to avoid reporting a different
Version to userspace then before skipping the getid.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Barnabás Pőcze <pobrn@protonmail.com>
Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Linus reported a ~50% performance regression on single-threaded
workloads on his AMD Ryzen system, and bisected it to:
9c0b4bb7f630 ("sched/cpufreq: Rework schedutil governor performance estimation")
When frequency invariance is not enabled, get_capacity_ref_freq(policy)
is supposed to return the current frequency and the performance margin
applied by map_util_perf(), enabling the utilization to go above the
maximum compute capacity and to select a higher frequency than the current one.
After the changes in 9c0b4bb7f630, the performance margin was applied
earlier in the path to take into account utilization clampings and
we couldn't get a utilization higher than the maximum compute capacity,
and the CPU remained 'stuck' at lower frequencies.
To fix this, we must use a frequency above the current frequency to
get a chance to select a higher OPP when the current one becomes fully used.
Apply the same margin and return a frequency 25% higher than the current
one in order to switch to the next OPP before we fully use the CPU
at the current one.
[ mingo: Clarified the changelog. ]
Fixes: 9c0b4bb7f630 ("sched/cpufreq: Rework schedutil governor performance estimation")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Bisected-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Wyes Karny <wkarny@gmail.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Wyes Karny <wkarny@gmail.com>
Link: https://lore.kernel.org/r/20240114183600.135316-1-vincent.guittot@linaro.org
|
|
RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
Integrated MEMS Resonator.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231120120114.48657-2-antoniu.miclaus@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
