| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* cfg.mk (sc_prohibit-long-form-bug-urls): Disallow long form in code.
* scripts/git-hooks/commit-msg: Disallow long form in commit messages.
* NEWS: Shorten long urls.
* bootstrap.conf: Likewise.
* configure.ac: Likewise.
* scripts/git-hooks/commit-msg: Likewise.
* src/csplit.c: Likewise.
* src/fmt.c: Likewise.
* src/make-prime-list.c: Likewise.
* src/nohup.c: Likewise.
* tests/od/od-float.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/tail/inotify-race.sh: Likewise.
* tests/tail/inotify-race2.sh: Likewise.
|
|
* tests/od/od.pl: Use the system error string for ERANGE,
rather than hardcoding a particular one.
Fixes https://bugs.gnu.org/78934
|
|
* tests/od/od.pl: New tests for the offset issues
|
|
* src/od.c (parse_old_offset): First arg is now char *,
not char const *. If a decimal number, temporarily
modify the string so that xstrtoumax does not complain
about the '.'.
* tests/od/od.pl: Test for the bug.
|
|
* src/od.c (print_n_spaces, pad_at, pad_at_overflow):
New static functions.
(struct tspec, PRINT_FIELDS, print_named_ascii, print_ascii)
(decode_one_format, write_block, main):
Use idx_t, not int, for counts that depend on the number
of bytes in an object.
(decode_one_format): Use print_n_spaces to output spaces.
(PRINT_FIELDS, print_named_ascii, print_ascii):
Use pad_at to avoid integer overflow.
(write_block): Do not use %*s to pad, as the total pad might
exceed INT_MAX. Instead, pad by hand with putchar (' ').
(main): Use pad_at_overflow to report integer overflow due to
oversize -w. Use better way to tell whether -w is used,
without needing IF_LINT.
* tests/od/big-w.sh: New test.
* tests/local.mk (all_tests): Add it.
|
|
* src/od.c (main): Don't pass LONGINT_OK to xstrtol_fatal(),
as otherwise it will abort().
* tests/od/od.pl: Add test cases.
* NEWS: Mention the bug fix.
Addresses https://bugs.gnu.org/78879
|
|
* src/od.c (dump_strings): There are three related issues here
due to not accounting for the terminating NUL char appropriately.
1. Ensure BUF always has enough space for the terminating NUL.
This avoids CWE-122: Heap-based Buffer Overflow,
where we wrote a single NUL byte directly after the allocated buffer.
I.e., there should be no buffer overflow with:
printf '%100s' | od -N100 -S1
2. Ensure we support -S == -N (END_OFFSET - STRING_MIN == ADDRESS):
I.e., there should be output with:
printf '%100s' | od -N10 -S10
3. Ensure we always output a valid address by ensuring
the ADDRESS and I variables are kept in sync.
I.e., this should output address 0000000 not 1777777777777777777777:
printf '%100s' | od -N10 -S1
As well as fixing these we simplify by using a single loop
to read the data, rather than two.
* doc/coreutils.texi (od invocation): Clarify that -N
implicitly NUL terminates strings.
* tests/od/od-N.sh: Add test cases.
* NEWS: Mention the bug fixes.
Fixes https://bugs.gnu.org/78880
|
|
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
od was seen to abort() on glibc on ia64 and m68k with the error:
Fatal glibc error: printf_fp.c:501 (__printf_fp_buffer_1):
assertion failed:
cy == 1 || (p.frac[p.fracsize - 2] == 0 && p.frac[0] == 0)
* tests/od/od-multiple-t.sh: Avoid outputting long double floats
to avoid undefined behavior. 'float' and 'double' are standardized
by IEEE 754 (except on Linux/m68k) and don't have undefined values.
|
|
* configure.ac: Ensure the compiler can promote 16 bit floating point
types to float, before enabling that code in od. This was an issue
with clang 16 at least.
* src/od.c: Adjust for the new defines.
* tests/od/od-float.sh: Likewise. Also port to the dash shell,
whose inbuilt printf doesn't support hex escapes.
|
|
Rely on compiler support for _Float16 and __bf16
to support -fH and -fB formats respectively.
I.e. IEEE 16 bit, and brain 16 bit floats respectively.
Modern GCC and LLVM compilers support both types.
clang-sect=half-precision-floating-point
https://gcc.gnu.org/onlinedocs/gcc/Half-Precision.html
https://clang.llvm.org/docs/LanguageExtensions.html#$clang-sect
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0192r4.html
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2022/p1467r9.html
This was tested on:
gcc 13, clang 17 x86 (Both types supported)
gcc 7 aarch64 (Only -fH supported)
gcc 13 ppc(be) (Neither supported. Both will be with GCC 14)
* src/od.c: Support -tf2 or -tfH to print IEEE 16 bit floating point,
or -tfB to print Brain 16 bit floating point.
* configure.ac: Check for _Float16 and __bf16 types.
* doc/coreutils.texi (od invocation): Mention the new -f types.
* tests/od/od-float.sh: Add test cases.
* NEWS: Mention the new feature.
Addresses https://bugs.gnu.org/68871
|
|
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
|
|
* cfg.mk: Adjust syntax check exclusion paths.
* tests/local.mk: Adjust for renamed tests.
|
|
Reflect these renamings:
od/od-N misc/od-N
od/x8 misc/od-x8
sha1sum/basic-1 misc/sha1sum
sha1sum/sample-vec misc/sha1sum-vec
shred/exact misc/shred-exact
shred/remove misc/shred-remove
stty/basic-1 misc/stty
stty/invalid misc/stty-invalid
stty/row-col-1 misc/stty-row-col
* tests/misc/Makefile.am (TESTS): Add the new files.
* tests/Makefile.am (SUBDIRS): Remove the dir names.
* tests/od, tests/sha1sum, tests/shred, tests/stty: Remove the directories.
* configure.ac (AC_CONFIG_FILES): Remove the corresponding Makefile names.
|
|
|
|
|
|
|
|
* Transform all Makefile.am files so that when running "make check",
CU_TEST_NAME is set to the name of the test. This is so that when I
run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check"
on the entire package it is more convenient to map a leak or error
found in a valgrind log file back to the offending test.
Use this command:
(echo tests/Makefile.am.in; find tests -name Makefile.am) \
|xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \
-e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
|
|
tree paths. In the cleanup trap, make sure `cd' succeeds before
`chmod'ing and `rm'ing the temporary files.
* tests/chgrp/basic: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chgrp/no-x: Likewise.
* tests/chgrp/posix-H: Likewise.
* tests/chgrp/recurse: Likewise.
* tests/chmod/c-option: Likewise.
* tests/chmod/equal-x: Likewise.
* tests/chmod/equals: Likewise.
* tests/chmod/inaccessible: Likewise.
* tests/chmod/no-x: Likewise.
* tests/chmod/octal: Likewise.
* tests/chmod/setgid: Likewise.
* tests/chmod/umask-x: Likewise.
* tests/chmod/usage: Likewise.
* tests/chown/basic: Likewise.
* tests/chown/deref: Likewise.
* tests/chown/separator: Likewise.
* tests/cp/acl: Likewise.
* tests/cp/backup-1: Likewise.
* tests/cp/backup-dir: Likewise.
* tests/cp/backup-is-src: Likewise.
* tests/cp/cp-HL: Likewise.
* tests/cp/cp-deref: Likewise.
* tests/cp/cp-i: Likewise.
* tests/cp/cp-mv-backup: Likewise.
* tests/cp/cp-parents: Likewise.
* tests/cp/deref-slink: Likewise.
* tests/cp/dir-rm-dest: Likewise.
* tests/cp/dir-slash: Likewise.
* tests/cp/dir-vs-file: Likewise.
* tests/cp/fail-perm: Likewise.
* tests/cp/into-self: Likewise.
* tests/cp/link: Likewise.
* tests/cp/link-no-deref: Likewise.
* tests/cp/link-preserve: Likewise.
* tests/cp/no-deref-link1: Likewise.
* tests/cp/no-deref-link2: Likewise.
* tests/cp/no-deref-link3: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/cp/r-vs-symlink: Likewise.
* tests/cp/same-file: Likewise.
* tests/cp/slink-2-slink: Likewise.
* tests/cp/sparse: Likewise.
* tests/cp/special-bits: Likewise.
* tests/cp/src-base-dot: Likewise.
* tests/cp/symlink-slash: Likewise.
* tests/dd/not-rewound: Likewise.
* tests/dd/skip-seek2: Likewise.
* tests/dd/unblock-sync: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/basic: Likewise.
* tests/du/deref: Likewise.
* tests/du/deref-args: Likewise.
* tests/du/exclude: Likewise.
* tests/du/fd-leak: Likewise.
* tests/du/hard-link: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/no-deref: Likewise.
* tests/du/no-x: Likewise.
* tests/du/restore-wd: Likewise.
* tests/du/slash: Likewise.
* tests/du/slink: Likewise.
* tests/du/trailing-slash: Likewise.
* tests/du/two-args: Likewise.
* tests/fmt/long-line: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/create-leading: Likewise.
* tests/install/d-slashdot: Likewise.
* tests/install/trap: Likewise.
* tests/ln/misc: Likewise.
* tests/ln/target-1: Likewise.
* tests/ls/color-dtype-dir: Likewise.
* tests/ls/dangle: Likewise.
* tests/ls/dired: Likewise.
* tests/ls/file-type: Likewise.
* tests/ls/follow-slink: Likewise.
* tests/ls/infloop: Likewise.
* tests/ls/inode: Likewise.
* tests/ls/m-option: Likewise.
* tests/ls/no-arg: Likewise.
* tests/ls/recursive: Likewise.
* tests/ls/rt-1: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/ls/stat-failed: Likewise.
* tests/ls/stat-vs-dirent: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/misc/csplit: Likewise.
* tests/misc/date-sec: Likewise.
* tests/misc/false-status: Likewise.
* tests/misc/head-c: Likewise.
* tests/misc/head-pos: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/nl: Likewise.
* tests/misc/nohup: Likewise.
* tests/misc/pathchk1: Likewise.
* tests/misc/printf: Likewise.
* tests/misc/printf-hex: Likewise.
* tests/misc/pwd-long: Likewise.
* tests/misc/shuf: Likewise.
* tests/misc/sort-rand: Likewise.
* tests/misc/split-a: Likewise.
* tests/misc/split-fail: Likewise.
* tests/misc/split-l: Likewise.
* tests/misc/stat-fmt: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/wc-files0: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-2: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/p-slashdot: Likewise.
* tests/mkdir/p-thru-slink: Likewise.
* tests/mkdir/p-v: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mkdir/t-slash: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/atomic: Likewise.
* tests/mv/backup-dir: Likewise.
* tests/mv/childproof: Likewise.
* tests/mv/diag: Likewise.
* tests/mv/dir-file: Likewise.
* tests/mv/dir2dir: Likewise.
* tests/mv/dup-source: Likewise.
* tests/mv/hard-2: Likewise.
* tests/mv/hard-3: Likewise.
* tests/mv/hard-4: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/hard-verbose: Likewise.
* tests/mv/i-2: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/i-4: Likewise.
* tests/mv/i-5: Likewise.
* tests/mv/i-link-no: Likewise.
* tests/mv/into-self-4: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/no-target-dir: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/perm-1: Likewise.
* tests/mv/reply-no: Likewise.
* tests/mv/trailing-slash: Likewise.
* tests/mv/update: Likewise.
* tests/od/od-N: Likewise.
* tests/od/x8: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/readlink/rl-1: Likewise.
* tests/rm/cycle: Likewise.
* tests/rm/dangling-symlink: Likewise.
* tests/rm/deep-1: Likewise.
* tests/rm/dir-no-w: Likewise.
* tests/rm/dir-nonrecur: Likewise.
* tests/rm/dot-rel: Likewise.
* tests/rm/empty-inacc: Likewise.
* tests/rm/f-1: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/hash: Likewise.
* tests/rm/i-1: Likewise.
* tests/rm/i-no-r: Likewise.
* tests/rm/ignorable: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/ir-1: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/r-1: Likewise.
* tests/rm/r-2: Likewise.
* tests/rm/r-3: Likewise.
* tests/rm/r-4: Likewise.
* tests/rm/readdir-bug: Likewise.
* tests/rm/rm1: Likewise.
* tests/rm/rm2: Likewise.
* tests/rm/rm3: Likewise.
* tests/rm/rm4: Likewise.
* tests/rm/rm5: Likewise.
* tests/rm/sunos-1: Likewise.
* tests/rm/unread2: Likewise.
* tests/rm/unread3: Likewise.
* tests/rmdir/fail-perm: Likewise.
* tests/rmdir/t-slash: Likewise.
* tests/shred/exact: Likewise.
* tests/shred/remove: Likewise.
* tests/sum/sysv: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/assert: Likewise.
* tests/tail-2/assert-2: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/fflush: Likewise.
* tests/tail-2/infloop-1: Likewise.
* tests/tail-2/proc-ksyms: Likewise.
* tests/tail-2/start-middle: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/tee/basic: Likewise.
* tests/tee/dash: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
|
|
Remove from CVS, since ./bootstrap generates them automatically.
* .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log.
Remove more-specific entries. This catches files like configure.lineno.
* man/.cvsignore: Add Makefile.in.
* src/.cvsignore: Add Makefile.in.
Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c.
For .cvsignore file under the tests directory:
Add Makefile.in. Sort entries if necessary. Remove *.I, *.E,
*.X, *.O, *-tests, build-script, mk-script if they're never
created in this directory.
* build-aux/.cvsignore: New file.
* doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf,
coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it
is, but the makefile doesn't mention it). Remove coreutils.info
as it is subsumed by coreutils.info*.
* lib/.cvsignore: Add Makefile.in, getdate.tab.h.
Remove stat.c, sysexit.h.
* m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4,
inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4,
lock.m4, printf-posix.m4, same-inode.m4, size_max.m4,
uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of
these are put in automatically by ../bootstrap, but that's a
bootstrap bug that I plan to fix shortly.
* po/.cvsignore: More ../bootstrap-related fixes, plus remove old
cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg,
cat-id-dbl.c, messages.mo, stamp-cat-id.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add $VG_PATH_PREFIX as a prefix to $PATH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
