| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In `reprepare_packed_git()` we perform a couple of operations:
- We reload alternate object directories.
- We clear the loose object cache.
- We reprepare packfiles.
While the logic is hosted in "packfile.c", it clearly reaches into other
subsystems that aren't related to packfiles.
Split up the responsibility and introduce `odb_reprepare()` which now
becomes responsible for repreparing the whole object database. The
existing `reprepare_packed_git()` function is refactored accordingly and
only cares about reloading the packfile store now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce implicit assumption and dependence on the_repository in the
object-file subsystem.
* ps/object-file-wo-the-repository:
object-file: get rid of `the_repository` in index-related functions
object-file: get rid of `the_repository` in `force_object_loose()`
object-file: get rid of `the_repository` in `read_loose_object()`
object-file: get rid of `the_repository` in loose object iterators
object-file: remove declaration for `for_each_file_in_obj_subdir()`
object-file: inline `for_each_loose_file_in_objdir_buf()`
object-file: get rid of `the_repository` when writing objects
odb: introduce `odb_write_object()`
loose: write loose objects map via their source
object-file: get rid of `the_repository` in `finalize_object_file()`
object-file: get rid of `the_repository` in `loose_object_info()`
object-file: get rid of `the_repository` when freshening objects
object-file: inline `check_and_freshen()` functions
object-file: get rid of `the_repository` in `has_loose_object()`
object-file: stop using `the_hash_algo`
object-file: fix -Wsign-compare warnings
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bc/use-sha256-by-default-in-3.0:
Enable SHA-256 by default in breaking changes mode
help: add a build option for default hash
t5300: choose the built-in hash outside of a repo
t4042: choose the built-in hash outside of a repo
t1007: choose the built-in hash outside of a repo
t: default to compile-time default hash if not set
setup: use the default algorithm to initialize repo format
Use legacy hash for legacy formats
builtin: use default hash when outside a repository
hash: add a constant for the legacy hash algorithm
hash: add a constant for the default hash algorithm
|
|
We do not have a backend-agnostic way to write objects into an object
database. While there is `write_object_file()`, this function is rather
specific to the loose object format.
Introduce `odb_write_object()` to plug this gap. For now, this function
is a simple wrapper around `write_object_file()` and doesn't even use
the passed-in object database yet. This will change in subsequent
commits, where `write_object_file()` is converted so that it works on
top of an `odb_source`. `odb_write_object()` will then become
responsible for deciding which source an object shall be written to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around object access API.
* ps/object-store:
odb: rename `read_object_with_reference()`
odb: rename `pretend_object_file()`
odb: rename `has_object()`
odb: rename `repo_read_object_file()`
odb: rename `oid_object_info()`
odb: trivial refactorings to get rid of `the_repository`
odb: get rid of `the_repository` when handling submodule sources
odb: get rid of `the_repository` when handling the primary source
odb: get rid of `the_repository` in `for_each()` functions
odb: get rid of `the_repository` when handling alternates
odb: get rid of `the_repository` in `odb_mkstemp()`
odb: get rid of `the_repository` in `assert_oid_type()`
odb: get rid of `the_repository` in `find_odb()`
odb: introduce parent pointers
object-store: rename files to "odb.{c,h}"
object-store: rename `object_directory` to `odb_source`
object-store: rename `raw_object_store` to `object_database`
|
|
* ps/object-store:
odb: rename `read_object_with_reference()`
odb: rename `pretend_object_file()`
odb: rename `has_object()`
odb: rename `repo_read_object_file()`
odb: rename `oid_object_info()`
odb: trivial refactorings to get rid of `the_repository`
odb: get rid of `the_repository` when handling submodule sources
odb: get rid of `the_repository` when handling the primary source
odb: get rid of `the_repository` in `for_each()` functions
odb: get rid of `the_repository` when handling alternates
odb: get rid of `the_repository` in `odb_mkstemp()`
odb: get rid of `the_repository` in `assert_oid_type()`
odb: get rid of `the_repository` in `find_odb()`
odb: introduce parent pointers
object-store: rename files to "odb.{c,h}"
object-store: rename `object_directory` to `odb_source`
object-store: rename `raw_object_store` to `object_database`
|
|
"git push" and "git fetch" are taught to update refs in batches to
gain performance.
* kn/fetch-push-bulk-ref-update:
receive-pack: handle reference deletions separately
refs/files: skip updates with errors in batched updates
receive-pack: use batched reference updates
send-pack: fix memory leak around duplicate refs
fetch: use batched reference updates
refs: add function to translate errors to strings
|
|
We have a large variety of data formats and protocols where no hash
algorithm was defined and the default was assumed to always be SHA-1.
Instead of explicitly stating SHA-1, let's use the constant to represent
the legacy hash algorithm (which is still SHA-1) so that it's clear
for documentary purposes that it's a legacy fallback option and not an
intentional choice to use SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `has_object()` to `odb_has_object()` to match other functions
related to the object database and our modern coding guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a couple of iterator-style functions that execute a callback
for each instance of a given set, all of which currently depend on
`the_repository`. Refactor them to instead take an object database as
parameter so that we can get rid of this dependency.
Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 9d2962a7c4 (receive-pack: use batched reference updates, 2025-05-19)
we updated the 'git-receive-pack(1)' command to use batched reference
updates. One edge case which was missed during this implementation was
when a user pushes multiple branches such as:
delete refs/heads/branch/conflict
create refs/heads/branch
Before using batched updates, the references would be applied
sequentially and hence no conflicts would arise. With batched updates,
while the first update applies, the second fails due to D/F conflict. A
similar issue was present in 'git-fetch(1)' and was fixed by separating
out reference pruning into a separate transaction in the commit 'fetch:
use batched reference updates'. Apply a similar mechanism for
'git-receive-pack(1)' and separate out reference deletions into its own
batch.
This means 'git-receive-pack(1)' will now use up to two transactions,
whereas before using batched updates it would use _at least_ two
transactions. So using batched updates is still the better option.
Add a test to validate this behavior.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During git-receive-pack(1), connectivity of the object graph is
validated to ensure that the received packfile does not leave the
repository in a broken state. This is done via git-rev-list(1) and
walking the objects, which can be expensive for large repositories.
Generally, this check is critical to avoid an incomplete received
packfile from corrupting a repository. Server operators may have
additional knowledge though around exactly how Git is being used on the
server-side which can be used to facilitate more efficient connectivity
computation of incoming objects.
For example, if it can be ensured that all objects in a repository are
connected and do not depend on any missing objects, the connectivity of
newly written objects can be checked by walking the object graph
containing only the new objects from the updated tips and identifying
the missing objects which represent the boundary between the new objects
and the repository. These boundary objects can be checked in the
canonical repository to ensure the new objects connect as expected and
thus avoid walking the rest of the object graph.
Git itself cannot make the guarantees required for such an optimization
as it is possible for a repository to contain an unreachable object that
references a missing object without the repository being considered
corrupt.
Introduce the --skip-connectivity-check option for git-receive-pack(1)
which bypasses this connectivity check to give more control to the
server-side. Note that without proper server-side validation of newly
received objects handled outside of Git, usage of this option risks
corrupting a repository.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reference updates performed as a part of 'git-receive-pack(1)', take
place one at a time. For each reference update, a new transaction is
created and committed. This is necessary to ensure we can allow
individual updates to fail without failing the entire command. The
command also supports an 'atomic' mode, which uses a single transaction
to update all of the references. But this mode has an all-or-nothing
approach, where if a single update fails, all updates would fail.
In 23fc8e4f61 (refs: implement batch reference update support,
2025-04-08), we introduced a new mechanism to batch reference updates.
Under the hood, this uses a single transaction to perform a batch of
reference updates, while allowing only individual updates to fail.
Utilize this newly introduced batch update mechanism in
'git-receive-pack(1)'. This provides a significant bump in performance,
especially when dealing with repositories with large number of
references.
With the reftable backend there is a 18x performance improvement, when
performing receive-pack with 10000 refs:
Benchmark 1: receive: many refs (refformat = reftable, refcount = 10000, revision = master)
Time (mean ± σ): 4.276 s ± 0.078 s [User: 0.796 s, System: 3.318 s]
Range (min … max): 4.185 s … 4.430 s 10 runs
Benchmark 2: receive: many refs (refformat = reftable, refcount = 10000, revision = HEAD)
Time (mean ± σ): 235.4 ms ± 6.9 ms [User: 75.4 ms, System: 157.3 ms]
Range (min … max): 228.5 ms … 254.2 ms 11 runs
Summary
receive: many refs (refformat = reftable, refcount = 10000, revision = HEAD) ran
18.16 ± 0.63 times faster than receive: many refs (refformat = reftable, refcount = 10000, revision = master)
In similar conditions, the files backend sees a 1.21x performance
improvement:
Benchmark 1: receive: many refs (refformat = files, refcount = 10000, revision = master)
Time (mean ± σ): 1.121 s ± 0.021 s [User: 0.128 s, System: 0.975 s]
Range (min … max): 1.097 s … 1.156 s 10 runs
Benchmark 2: receive: many refs (refformat = files, refcount = 10000, revision = HEAD)
Time (mean ± σ): 927.9 ms ± 22.6 ms [User: 99.0 ms, System: 815.2 ms]
Range (min … max): 903.1 ms … 978.0 ms 10 runs
Summary
receive: many refs (refformat = files, refcount = 10000, revision = HEAD) ran
1.21 ± 0.04 times faster than receive: many refs (refformat = files, refcount = 10000, revision = master)
As using batched updates requires the error handling to be moved to the
end of the flow, create and use a 'struct strset' to track the failed
refs and attribute the correct errors to them.
This change also uncovers an issue when a client provides multiple
updates to the same reference. For example:
$ git send-pack remote.git A:foo B:foo
Enumerating objects: 3, done.
Counting objects: 100% (3/3), done.
Delta compression using up to 20 threads
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 226 bytes | 226.00 KiB/s, done.
Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)
remote: error: cannot lock ref 'refs/heads/foo': reference already exists
To remote.git
! [remote rejected] A -> foo (failed to update ref)
! [remote failure] B -> foo (remote failed to report status)
As you can see, the remote runs into an error because it cannot lock the
target reference for the second update. Furthermore, the remote complains
that the first update has been rejected whereas the second update didn't
receive any status update because we failed to lock it. Reading this status
message alone a user would probably expect that `foo` has not been updated
at all. But that's not the case: while we claim that the ref wasn't updated,
it surprisingly points to `A` now.
One could argue that this is merely an error in how we report the result of
this push. But ultimately, the user's request itself is already broken and
doesn't make any sense in the first place and cannot ever lead to a sensible
outcome that honors the full request.
The conversion to batched transactions fixes the issue because we now try to
queue both updates in the same transaction. As such, the transaction itself
will notice this conflict and refuse the update altogether before we commit
any of the values.
Note that this requires changes to a couple of tests in t5408 that happened
to exercise this behaviour. Given that the generated output is misleading
and given that the user request cannot ever be fully honored this really
feels more like a bug than properly designed behaviour. As such, changing
the behaviour feels like the right thing to do.
Since now reference updates are batched, the 'reference-transaction'
hook will be invoked with all updates together. Currently git will 'die'
when the hook returns with a non-zero exit status in the 'prepared'
stage. For 'git-receive-pack(1)', this allowed users to reject an
individual reference update, git would have applied previous updates but
immediately abort further execution. This is definitely an incorrect
usage of this hook, since the right place to do this would be the
'update' hook. This patch retains the latter behavior, but
'reference-transaction' hook now changes to a all-or-nothing behavior
when a non-zero exit status is returned in the 'prepared' stage, since
batch updates use a transaction under the hood. This explains the change
in 't1416'.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the comment of `repo_has_object_file()` and its `_with_flags()`
variant tells us, these functions are considered to be deprecated in
favor of `has_object()`. There are a couple of slight benefits in favor
of the replacement:
- The new function has a short-and-sweet name.
- More explicit defaults: `has_object()` doesn't fetch missing objects
via promisor remotes, and neither does it reload packfiles if an
object wasn't found by default. This ensures that it becomes
immediately obvious when a simple object existence check may result
in expensive actions.
Most importantly though, it is confusing that we have two sets of
functions that ultimately do the same thing, but with different
defaults.
Start sunsetting `repo_has_object_file()` and its `_with_flags()`
sibling by replacing all callsites with `has_object()`:
- `repo_has_object_file(...)` is equivalent to
`has_object(..., HAS_OBJECT_RECHECK_PACKED | HAS_OBJECT_FETCH_PROMISOR)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK | OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., 0)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., HAS_OBJECT_RECHECK_PACKED)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK)`
is equivalent to `has_object(..., HAS_OBJECT_FETCH_PROMISOR)`.
The replacements should be functionally equivalent.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we have the "object-store.h" header, most of the functionality for
object stores is actually hosted in "object-file.c". This makes it hard
to find relevant functions and causes us to mix up concerns.
Split out functions relating to the object store subsystem into a new
"object-store.c" file.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The path.[ch] API takes an explicit repository parameter passed
throughout the callchain, instead of relying on the_repository
singleton instance.
* ps/path-sans-the-repository:
path: adjust last remaining users of `the_repository`
environment: move access to "core.sharedRepository" into repo settings
environment: move access to "core.hooksPath" into repo settings
repo-settings: introduce function to clear struct
path: drop `git_path()` in favor of `repo_git_path()`
rerere: let `rerere_path()` write paths into a caller-provided buffer
path: drop `git_common_path()` in favor of `repo_common_path()`
worktree: return allocated string from `get_worktree_git_dir()`
path: drop `git_path_buf()` in favor of `repo_git_path_replace()`
path: drop `git_pathdup()` in favor of `repo_git_path()`
path: drop unused `strbuf_git_path()` function
path: refactor `repo_submodule_path()` family of functions
submodule: refactor `submodule_to_gitdir()` to accept a repo
path: refactor `repo_worktree_path()` family of functions
path: refactor `repo_git_path()` family of functions
path: refactor `repo_common_path()` family of functions
|
|
Further code clean-up on the use of hash functions. Now the
context object knows what hash function it is working with.
* ps/hash-cleanup:
global: adapt callers to use generic hash context helpers
hash: provide generic wrappers to update hash contexts
hash: stop typedeffing the hash context
hash: convert hashing context to a structure
|
|
The `get_worktree_git_dir()` function returns a string constant that
does not need to be free'd by the caller. This string is computed for
three different cases:
- If we don't have a worktree we return a path into the Git directory.
The returned string is owned by `the_repository`, so there is no
need for the caller to free it.
- If we have a worktree, but no worktree ID then the caller requests
the main worktree. In this case we return a path into the common
directory, which again is owned by `the_repository` and thus does
not need to be free'd.
- In the third case, where we have an actual worktree, we compute the
path relative to "$GIT_COMMON_DIR/worktrees/". This string does not
need to be released either, even though `git_common_path()` ends up
allocating memory. But this doesn't result in a memory leak either
because we write into a buffer returned by `get_pathname()`, which
returns one out of four static buffers.
We're about to drop `git_common_path()` in favor of `repo_common_path()`,
which doesn't use the same mechanism but instead returns an allocated
string owned by the caller. While we could adapt `get_worktree_git_dir()`
to also use `get_pathname()` and print the derived common path into that
buffer, the whole schema feels a lot like premature optimization in this
context. There are some callsites where we call `get_worktree_git_dir()`
in a loop that iterates through all worktrees. But none of these loops
seem to be even remotely in the hot path, so saving a single allocation
there does not feel worth it.
Refactor the function to instead consistently return an allocated path
so that we can start using `repo_common_path()` in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* kn/pack-write-with-reduced-globals:
pack-write: pass hash_algo to internal functions
pack-write: pass hash_algo to `write_rev_file()`
pack-write: pass hash_algo to `write_idx_file()`
pack-write: pass repository to `index_pack_lockfile()`
pack-write: pass hash_algo to `fixup_pack_header_footer()`
|
|
Adapt callers to use generic hash context helpers instead of using the
hash algorithm to update them. This makes the callsites easier to reason
about and removes the possibility that the wrong hash algorithm is used
to update the hash context's state. And as a nice side effect this also
gets rid of a bunch of users of `the_hash_algo`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We generally avoid using `typedef` in the Git codebase. One exception
though is the `git_hash_ctx`, likely because it used to be a union
rather than a struct until the preceding commit refactored it. But now
that it is a normal `struct` there isn't really a need for a typedef
anymore.
Drop the typedef and adapt all callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `index_pack_lockfile()` function uses the global `the_repository`
variable to access the repository. To avoid global variable usage, pass
the repository from the layers above.
Altough the layers above could have access to the repository internally,
simply pass in `the_repository`. This avoids any compatibility issues
and bubbles up global variable usage to upper layers which can be
eventually resolved.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More code paths have a repository passed through the callchain,
instead of assuming the primary the_repository object.
* ps/the-repository:
match-trees: stop using `the_repository`
graph: stop using `the_repository`
add-interactive: stop using `the_repository`
tmp-objdir: stop using `the_repository`
resolve-undo: stop using `the_repository`
credential: stop using `the_repository`
mailinfo: stop using `the_repository`
diagnose: stop using `the_repository`
server-info: stop using `the_repository`
send-pack: stop using `the_repository`
serve: stop using `the_repository`
trace: stop using `the_repository`
pager: stop using `the_repository`
progress: stop using `the_repository`
|
|
In Git, fsck operations can ignore known broken objects via the
`fsck.skipList` configuration. This option expects a path to a file with
the list of object names. When the configuration is specified without a
path, an error message is printed, but the command continues as if the
configuration was not set. Configuring `fsck.skipList` without a value
is a misconfiguration so config parsing should be more strict and reject
it.
Update `git_fsck_config()` to no longer ignore misconfiguration of
`fsck.skipList`. The same behavior is also present for
`fetch.fsck.skipList` and `receive.fsck.skipList` so the configuration
parsers for these are updated to ensure the related operations remain
consistent.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "tmp-objdir" subsystem by passing
in the repostiroy when creating a new temporary object directory.
While we could trivially update the caller to pass in the hash algorithm
used by the index itself, we instead pass in `the_hash_algo`. This is
mostly done to stay consistent with the rest of the code in that file,
which isn't prepared to handle arbitrary repositories, either.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "server-info" subsystem by passing in
a repository when updating server info and storing the repository in the
`update_info_ctx` structure to make it accessible to other functions.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow passing flags when setting up a transaction such that the
behaviour of the transaction itself can be altered. This functionality
will be used in a subsequent patch.
Adapt callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The push reports that report failures to the user when pushing a
reference leak in several places. Plug these leaks by introducing a new
function `ref_push_report_free()` that frees the list of reports and
call it as required. While at it, fix a trivially leaking error string
in the vicinity.
These leaks get hit in t5411, but plugging them does not make the whole
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* ak/typofix-builtins:
builtin: fix typos
|
|
The reftable backend learned to more efficiently handle exclude
patterns while enumerating the refs.
* ps/reftable-exclude:
refs/reftable: wire up support for exclude patterns
reftable/reader: make table iterator reseekable
t/unit-tests: introduce reftable library
Makefile: stop listing test library objects twice
builtin/receive-pack: fix exclude patterns when announcing refs
refs: properly apply exclude patterns to namespaced refs
|
|
Fix typos in comments.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `write_head_info()` we announce references to the remote client. We
need to honor "transfer.hideRefs" here so that we do not announce any
references that the client shouldn't be able to learn about. This is
done via two separate mechanisms:
- We hand over exclude patterns to the reference backend. We can only
honor "plain" exclude patterns here that do not have prefixes with
special meaning such as "^" or "!". Filtering down the references is
handled by `hidden_refs_to_excludes()`.
- In `show_ref_cb()` we perform a second check against hidden refs.
For one this is done such that we can handle those special prefixes.
And second, handling exclude patterns in ref backends is optional,
so we also have to handle "normal" patterns.
The special-meaning "^" prefix alters whether a hidden ref applies to
the namespace-stripped reference name or the full name. So while we
would usually call `refs_for_each_namespaced_ref()` to only get those
references in the current namespace, we can't because we'd get the
already-rewritten reference names. Instead, we are forced to use
`refs_for_each_fullref_in()` and then manually strip away the namespace
prefix such that we have access to both names.
But this also means that we do not get namespace handling for exclude
patterns, which `refs_for_each_namespaced_ref()` brings for free. This
results in a bug because we potentially end up hiding away references
based on their namespaced name and not on the stripped name as we really
should be doing.
Fix this by manually rewriting the exclude patterns to their namespaced
variants.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of API functions that implicitly depend on the_repository
object in the config subsystem has been rewritten to pass a
repository object through the callchain.
* ps/config-wo-the-repository:
config: hide functions using `the_repository` by default
global: prepare for hiding away repo-less config functions
config: don't depend on `the_repository` with branch conditions
config: don't have setters depend on `the_repository`
config: pass repo to functions that rename or copy sections
config: pass repo to `git_die_config()`
config: pass repo to `git_config_get_expiry_in_days()`
config: pass repo to `git_config_get_expiry()`
config: pass repo to `git_config_get_max_percent_split_change()`
config: pass repo to `git_config_get_split_index()`
config: pass repo to `git_config_get_index_threads()`
config: expose `repo_config_clear()`
config: introduce missing setters that take repo as parameter
path: hide functions using `the_repository` by default
path: stop relying on `the_repository` in `worktree_git_path()`
path: stop relying on `the_repository` when reporting garbage
hooks: remove implicit dependency on `the_repository`
editor: do not rely on `the_repository` for interactive edits
path: expose `do_git_common_path()` as `repo_common_pathv()`
path: expose `do_git_path()` as `repo_git_pathv()`
|
|
We implicitly depend on `the_repository` in our hook subsystem because
we use `strbuf_git_path()` to compute hook paths. Remove this dependency
by accepting a `struct repository` as parameter instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a parameter to each_ref_fn so that callers to the ref APIs
that use this function as a callback can have acess to the
unresolved value of a symbolic ref.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A CPP macro USE_THE_REPOSITORY_VARIABLE is introduced to help
transition the codebase to rely less on the availability of the
singleton the_repository instance.
* ps/use-the-repository:
hex: guard declarations with `USE_THE_REPOSITORY_VARIABLE`
t/helper: remove dependency on `the_repository` in "proc-receive"
t/helper: fix segfault in "oid-array" command without repository
t/helper: use correct object hash in partial-clone helper
compat/fsmonitor: fix socket path in networked SHA256 repos
replace-object: use hash algorithm from passed-in repository
protocol-caps: use hash algorithm from passed-in repository
oidset: pass hash algorithm when parsing file
http-fetch: don't crash when parsing packfile without a repo
hash-ll: merge with "hash.h"
refs: avoid include cycle with "repository.h"
global: introduce `USE_THE_REPOSITORY_VARIABLE` macro
hash: require hash algorithm in `empty_tree_oid_hex()`
hash: require hash algorithm in `is_empty_{blob,tree}_oid()`
hash: make `is_null_oid()` independent of `the_repository`
hash: convert `oidcmp()` and `oideq()` to compare whole hash
global: ensure that object IDs are always padded
hash: require hash algorithm in `oidread()` and `oidclr()`
hash: require hash algorithm in `hasheq()`, `hashcmp()` and `hashclr()`
hash: drop (mostly) unused `is_empty_{blob,tree}_sha1()` functions
|
|
"git update-ref --stdin" learned to handle transactional updates of
symbolic-refs.
* kn/update-ref-symref:
update-ref: add support for 'symref-update' command
reftable: pick either 'oid' or 'target' for new updates
update-ref: add support for 'symref-create' command
update-ref: add support for 'symref-delete' command
update-ref: add support for 'symref-verify' command
refs: specify error for regular refs with `old_target`
refs: create and use `ref_update_expects_existing_old_ref()`
|
|
The `empty_tree_oid_hex()` function use `the_repository` to derive the
hash function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
While at it, remove the unused `empty_blob_oid_hex()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `oidread()` and `oidclr()` use `the_repository` to derive the hash
function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to enable `-Wwrite-strings`, which changes the type of
string constants to `const char[]`. Fix various sites where we assign
such constants to non-const variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new command 'symref-delete' to allow deletions of symbolic refs in
a transaction via the '--stdin' mode of the 'git-update-ref' command.
The 'symref-delete' command can, when given an <old-target>, delete the
provided <ref> only when it points to <old-target>.
This command is only compatible with the 'no-deref' mode because we
optionally want to check the 'old_target' of the ref being deleted.
De-referencing a symbolic ref would provide a regular ref and we already
have the 'delete' command for regular refs.
While users can also use 'git symbolic-ref -d' to delete symbolic refs,
the 'symref-delete' command in 'git-update-ref' allows users to do so
within a transaction, which promises atomicity of the operation and can
be batched with other commands.
When no 'old_target' is provided it can also delete regular refs,
similar to how the 'delete' command can delete symrefs when no 'old_oid'
is provided.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The out parameter of `git_config_string()` is a `const char **` even
though we transfer ownership of memory to the caller. This is quite
misleading and has led to many memory leaks all over the place. Adapt
the parameter to instead be `char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The out parameter of `git_config_pathname()` is a `const char **` even
though we transfer ownership of memory to the caller. This is quite
misleading and has led to many memory leaks all over the place. Adapt
the parameter to instead be `char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
