| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git remote rename origin upstream" failed to move origin/HEAD to
upstream/HEAD when origin/HEAD is unborn and performed other
renames extremely inefficiently, which has been corrected.
* ps/remote-rename-fix:
builtin/remote: only iterate through refs that are to be renamed
builtin/remote: rework how remote refs get renamed
builtin/remote: determine whether refs need renaming early on
builtin/remote: fix sign comparison warnings
refs: simplify logic when migrating reflog entries
refs: pass refname when invoking reflog entry callback
|
|
Squelch false-positive compiler warning.
* dl/squelch-maybe-uninitialized:
t/unit-tests/clar: fix -Wmaybe-uninitialized with -Og
remote: bail early from set_head() if missing remote name
|
|
When renaming a remote we also need to rename all references
accordingly. But while we only need to rename references that are
contained in the "refs/remotes/$OLDNAME/" namespace, we end up using
`refs_for_each_rawref()` that iterates through _all_ references. We know
to exit early in the callback in case we see an irrelevant reference,
but ultimately this is still a waste of compute as we knowingly iterate
through references that we won't ever care about.
Improve this by using `refs_for_each_rawref_in()`, which knows to only
iterate through (potentially broken) references in a given prefix.
The following benchmark renames a remote with a single reference in a
repository that has 100k unrelated references. This shows a sizeable
improvement with the "files" backend:
Benchmark 1: rename remote (refformat = files, revision = HEAD~)
Time (mean ± σ): 42.6 ms ± 0.9 ms [User: 29.1 ms, System: 8.4 ms]
Range (min … max): 40.1 ms … 43.3 ms 10 runs
Benchmark 2: rename remote (refformat = files, revision = HEAD)
Time (mean ± σ): 31.7 ms ± 4.0 ms [User: 19.6 ms, System: 6.9 ms]
Range (min … max): 27.1 ms … 36.0 ms 10 runs
Summary
rename remote (refformat = files, revision = HEAD) ran
1.35 ± 0.17 times faster than rename remote (refformat = files, revision = HEAD~)
The "reftable" backend shows roughly the same absolute improvement, but
given that it's already significantly faster than the "files" backend
this translates to a much larger relative improvement:
Benchmark 1: rename remote (refformat = reftable, revision = HEAD~)
Time (mean ± σ): 18.2 ms ± 0.5 ms [User: 12.7 ms, System: 3.0 ms]
Range (min … max): 17.3 ms … 21.4 ms 110 runs
Benchmark 2: rename remote (refformat = reftable, revision = HEAD)
Time (mean ± σ): 8.8 ms ± 0.5 ms [User: 3.8 ms, System: 2.9 ms]
Range (min … max): 7.5 ms … 9.9 ms 167 runs
Summary
rename remote (refformat = reftable, revision = HEAD) ran
2.07 ± 0.12 times faster than rename remote (refformat = reftable, revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was recently reported [1] that renaming a remote that has dangling
symrefs is broken. This issue can be trivially reproduced:
$ git init repo
Initialized empty Git repository in /tmp/repo/.git/
$ cd repo/
$ git remote add origin /dev/null
$ git symbolic-ref refs/remotes/origin/HEAD refs/remotes/origin/master
$ git remote rename origin renamed
$ git symbolic-ref refs/remotes/origin/HEAD
refs/remotes/origin/master
$ git symbolic-ref refs/remotes/renamed/HEAD
fatal: ref refs/remotes/renamed/HEAD is not a symbolic ref
As one can see, the "HEAD" reference did not get renamed but stays in
the same place. There are two issues here:
- We use `refs_resolve_ref_unsafe()` to resolve references, but we
don't pass the `RESOLVE_REF_NO_RECURSE` flag. Consequently, if the
reference does not resolve, the function will fail and we thus
ignore this branch.
- We use `refs_for_each_ref()` to iterate through the old remote's
references, but that function ignores broken references.
Both of these issues are easy to fix. But having a closer look at the
logic that renames remote references surfaces that it leaves a lot to be
desired overall.
The problem is that we're using O(|refs| + |symrefs| * 2) many reference
transactions to perform the renames. We first delete all symrefs, then
individually rename every direct reference and finally we recreate the
symrefs. On the one hand this isn't even remotely an atomic operation,
so if we hit any error we'll already have deleted all references.
But more importantly it is also extremely inefficient. The number of
transactions for symrefs doesn't really bother us too much, as there
should generally only be a single symref anyway ("HEAD"). But the
renames are very expensive:
- For the "reftable" backend we perform auto-compaction after every
single rename, which does add up.
- For the "files" backend we potentially have to rewrite the
"packed-refs" file on every single rename in case they are packed.
The consequence here is quadratic runtime performance. Renaming a
100k references takes hours to complete.
Refactor the code to use a single transaction to perform all the
reference updates atomically, which speeds up the transaction quite
significantly:
Benchmark 1: rename remote (refformat = files, revision = HEAD~)
Time (mean ± σ): 238.770 s ± 13.857 s [User: 91.473 s, System: 143.793 s]
Range (min … max): 204.863 s … 247.699 s 10 runs
Benchmark 2: rename remote (refformat = files, revision = HEAD)
Time (mean ± σ): 2.103 s ± 0.036 s [User: 0.360 s, System: 1.313 s]
Range (min … max): 2.011 s … 2.141 s 10 runs
Summary
rename remote (refformat = files, revision = HEAD) ran
113.53 ± 6.87 times faster than rename remote (refformat = files, revision = HEAD~)
For the "reftable" backend we see a significant speedup, as well, but
given that we don't have quadratic runtime behaviour there it's way less
extreme:
Benchmark 1: rename remote (refformat = reftable, revision = HEAD~)
Time (mean ± σ): 8.604 s ± 0.539 s [User: 4.985 s, System: 2.368 s]
Range (min … max): 7.880 s … 9.556 s 10 runs
Benchmark 2: rename remote (refformat = reftable, revision = HEAD)
Time (mean ± σ): 1.177 s ± 0.103 s [User: 0.446 s, System: 0.270 s]
Range (min … max): 1.023 s … 1.410 s 10 runs
Summary
rename remote (refformat = reftable, revision = HEAD) ran
7.31 ± 0.79 times faster than rename remote (refformat = reftable, revision = HEAD~)
There is one issue though with using atomic transactions: when nesting a
remote into itself it can happen that renamed references conflict with
the old referencse. For example, when we have a reference
"refs/remotes/origin/foo" and we rename "origin" to "origin/foo", then
we'll end up with an F/D conflict when we try to create the renamed
reference "refs/remotes/origin/foo/foo".
This situation is overall quite unlikely to happen: people tend to not
use nested remotes, and if they do they must at the same time also have
a conflicting refname. But the end result would be that the old remote
references stay intact whereas all the other parts of the repository
have been adjusted for the new remote name.
Address this by queueing and preparing the reference update before we
touch any other part of the repository. Like this we can make sure that
the reference update will go through before rewriting the configuration.
Otherwise, if the transaction fails to prepare we can gracefully abort
the whole operation without any changes having been performed in the
repository yet. Furthermore, we can detect the conflict and print some
helpful advice for how the user can resolve this situation. So overall,
the tradeoff is that:
- Reference transactions are now all-or-nothing. This is a significant
improvement over the previous state where we may have ended up with
partially-renamed references.
- Rewriting references is now significantly faster.
- We only rewrite the configuration in case we know that all
references can be updated.
- But we may refuse to rename a remote in case references conflict.
Overall this seems like an acceptable tradeoff.
While at it, fix the handling of symbolic/broken references by using
`refs_for_each_rawref()`. Add tests that cover both this reported issue
and tests that exercise nesting of remotes.
One thing to note: with this change we cannot provide a proper progress
monitor anymore as we queue the references into the transactions as we
iterate through them. Consequently, as we don't know yet how many refs
there are in total, we cannot report how many percent of the operation
is done anymore. But that's a small price to pay considering that you
now shouldn't need the progress monitor in most situations at all
anymore.
[1]: <CANrWfmQWa=RJnm7d3C7ogRX6Tth2eeuGwvwrNmzS2gr+eP0OpA@mail.gmail.com>
Reported-by: Han Jiang <jhcarl0814@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When renaming a remote we may have to also rename remote refs in case
the refspec changes. Pull out this computation into a separate loop.
While that seems nonsensical right now, it'll help us in a subsequent
commit where we will prepare the reference transaction before we rewrite
the configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix -Wsign-comparison warnings. All of the warnings we have are about
mismatches in signedness for loop counters. These are trivially fixable
by using the correct integer type.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "git remote set-head", we can take varying numbers of arguments
depending on whether we saw the "-d" or "-a" options. But the first
argument is always the remote name.
The current code is somewhat awkward in that it conditionally handles
the remote name up-front like this:
if (argc)
remote = ...from argv[0]...
and then only later decides to bail if we do not have the right number
of arguments for the options we saw.
This makes it hard to figure out if "remote" is always set when it needs
to be. Both for humans, but also for compilers; with -Og, gcc complains
that "remote" can be accessed without being initialized (although this
is not true, as we'd always die with a usage message in that case).
Let's instead enforce the presence of the remote argument up front,
which fixes the compiler warning and is easier to understand. It does
mean duplicating the code to print a usage message, but it's a single
line.
Noticed-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config API had a set of convenience wrapper functions that
implicitly use the_repository instance; they have been removed and
inlined at the calling sites.
* ps/config-wo-the-repository: (21 commits)
config: fix sign comparison warnings
config: move Git config parsing into "environment.c"
config: remove unused `the_repository` wrappers
config: drop `git_config_set_multivar()` wrapper
config: drop `git_config_get_multivar_gently()` wrapper
config: drop `git_config_set_multivar_in_file_gently()` wrapper
config: drop `git_config_set_in_file_gently()` wrapper
config: drop `git_config_set()` wrapper
config: drop `git_config_set_gently()` wrapper
config: drop `git_config_set_in_file()` wrapper
config: drop `git_config_get_bool()` wrapper
config: drop `git_config_get_ulong()` wrapper
config: drop `git_config_get_int()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string_multi()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get()` wrapper
config: drop `git_config_clear()` wrapper
...
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_multivar()`.
All callsites are adjusted so that they use
`repo_config_set_multivar(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove
`git_config_get_multivar_gently()`. All callsites are adjusted so that
they use `repo_config_get_multivar_gently(the_repository, ...)` instead.
While some callsites might already have a repository available, this
mechanical conversion is the exact same as the current situation and
thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set()`. All
callsites are adjusted so that they use `repo_config_set(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_gently()`.
All callsites are adjusted so that they use
`repo_config_set_gently(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_string()`.
All callsites are adjusted so that they use
`repo_config_get_string(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote" now detects remote names that overlap with each other
(e.g., remote nickname "outer" and "outer/inner" are used at the
same time), as it will lead to overlapping remote-tracking
branches.
* jk/remote-avoid-overlapping-names:
remote: detect collisions in remote names
|
|
"git fetch --prune" used to be O(n^2) expensive when there are many
refs, which has been corrected.
* ph/fetch-prune-optim:
clean up interface for refs_warn_dangling_symrefs
refs: remove old refs_warn_dangling_symref
fetch-prune: optimize dangling-ref reporting
|
|
When two remotes collide in the destinations of their fetch refspecs,
the results can be confusing. For example, in this silly example:
git config remote.one.url [...]
git config remote.one.fetch +refs/heads/*:refs/remotes/collide/*
git config remote.two.url [...]
git config remote.two.fetch +refs/heads/*:refs/remotes/collide/*
git fetch --all
we may try to write to the same ref twice (once for each remote we're
fetching). There's also a more subtle version of this. If you have
remotes "outer/inner" and "outer", then the ref "inner/branch" on the
second remote will conflict with just "branch" on the former (they both
want to write to "refs/remotes/outer/inner/branch").
We probably don't want to forbid this kind of overlap completely. While
the results can be confusing, there are legitimate reasons to have
multiple refs write into the same namespace (e.g., if one is a "backup"
of the other that is rarely fetched from).
But it may be worth limiting the porcelain "git remote" command to avoid
this confusion. The example above cannot be done with "git remote",
because it always[1] matches the refspecs to the remote name, and you
can only have one instance of each remote name. But you can still
trigger the more subtle variant like this:
git remote add outer [...]
git remote add outer/inner [...]
So let's detect that kind of name collision (in both directions) and
forbid it. You can still do whatever you like by manipulating the config
directly, but this should prevent the most obvious foot-gun.
[1] Almost always. With the --mirror option, the resulting refspec will
just write into "refs/*"; the remote name does not appear in the ref
namespace at all.
Our new "names must not overlap" rule is not necessary for that
case, but it seems reasonable to enforce it consistently. We already
require all remote names to be valid in the ref namespace, even
though we won't ever use them in that context for --mirror remotes.
Likewise, our new rule doesn't help with overlap here. Any two
mirror remotes will always overlap (in fact, any mirror remote along
with any other single one, since refs/remotes/ is a subset of the
mirrored refs). I'm not sure this is worth worrying about, but if it
is, we'd want an additional rule like "mirror remotes must be the
only remote".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The refs_warn_dangling_symrefs interface is a bit fragile as it passes
in printf-formatting strings with expectations about the number of
arguments. This patch series made it worse by adding a 2nd positional
argument. But there are only two call sites, and they both use almost
identical display options.
Make this safer by moving the format strings into the function that uses
them to make it easier to see when the arguments don't match. Pass a
prefix string and a dry_run flag so the decision logic can be handled
where needed.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pruning during `git fetch` we check each pruned ref against the
ref_store one at a time to decide whether to report it as dangling.
This causes every local ref to be scanned for each ref being pruned.
If there are N refs in the repo and M refs being pruned, this code is
O(M*N). However, `git remote prune` uses a very similar function that
is only O(N*log(M)).
Remove the wasteful ref scanning for each pruned ref and use the faster
version already available in refs_warn_dangling_symrefs. Change the
message to include the original refname since the message is no longer
printed immediately after the line that did just print the refname.
In a repo with 126,000 refs, where I was pruning 28,000 refs, this
code made about 3.6 billion calls to strcmp and consumed 410 seconds
of CPU. (Invariably in that time, my remote would timeout and the
fetch would fail anyway.)
After this change, the same operation completes in under a second.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `has_object()` to `odb_has_object()` to match other functions
related to the object database and our modern coding guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the comment of `repo_has_object_file()` and its `_with_flags()`
variant tells us, these functions are considered to be deprecated in
favor of `has_object()`. There are a couple of slight benefits in favor
of the replacement:
- The new function has a short-and-sweet name.
- More explicit defaults: `has_object()` doesn't fetch missing objects
via promisor remotes, and neither does it reload packfiles if an
object wasn't found by default. This ensures that it becomes
immediately obvious when a simple object existence check may result
in expensive actions.
Most importantly though, it is confusing that we have two sets of
functions that ultimately do the same thing, but with different
defaults.
Start sunsetting `repo_has_object_file()` and its `_with_flags()`
sibling by replacing all callsites with `has_object()`:
- `repo_has_object_file(...)` is equivalent to
`has_object(..., HAS_OBJECT_RECHECK_PACKED | HAS_OBJECT_FETCH_PROMISOR)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK | OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., 0)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., HAS_OBJECT_RECHECK_PACKED)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK)`
is equivalent to `has_object(..., HAS_OBJECT_FETCH_PROMISOR)`.
The replacements should be functionally equivalent.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/object-file-cleanup:
object-store: merge "object-store-ll.h" and "object-store.h"
object-store: remove global array of cached objects
object: split out functions relating to object store subsystem
object-file: drop `index_blob_stream()`
object-file: split up concerns of `HASH_*` flags
object-file: split out functions relating to object store subsystem
object-file: move `xmmap()` into "wrapper.c"
object-file: move `git_open_cloexec()` to "compat/open.c"
object-file: move `safe_create_leading_directories()` into "path.c"
object-file: move `mkdir_in_gitdir()` into "path.c"
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `repo_default_branch_name()` invoked through `guess_remote_head()`
is configured to always display the default branch advice message.
Adapt `guess_remote_head()` to accept flags and convert the `all`
parameter to a flag. Add the `REMOTE_GUESS_HEAD_QUIET` flag to to enable
suppression of advice messages. Call sites are updated accordingly.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The path.[ch] API takes an explicit repository parameter passed
throughout the callchain, instead of relying on the_repository
singleton instance.
* ps/path-sans-the-repository:
path: adjust last remaining users of `the_repository`
environment: move access to "core.sharedRepository" into repo settings
environment: move access to "core.hooksPath" into repo settings
repo-settings: introduce function to clear struct
path: drop `git_path()` in favor of `repo_git_path()`
rerere: let `rerere_path()` write paths into a caller-provided buffer
path: drop `git_common_path()` in favor of `repo_common_path()`
worktree: return allocated string from `get_worktree_git_dir()`
path: drop `git_path_buf()` in favor of `repo_git_path_replace()`
path: drop `git_pathdup()` in favor of `repo_git_path()`
path: drop unused `strbuf_git_path()` function
path: refactor `repo_submodule_path()` family of functions
submodule: refactor `submodule_to_gitdir()` to accept a repo
path: refactor `repo_worktree_path()` family of functions
path: refactor `repo_git_path()` family of functions
path: refactor `repo_common_path()` family of functions
|
|
Remove `git_path()` in favor of the `repo_git_path()` family of
functions, which makes the implicit dependency on `the_repository` go
away.
Note that `git_path()` returned a string allocated via `get_pathname()`,
which uses a rotating set of statically allocated buffers. Consequently,
callers didn't have to free the returned string. The same isn't true for
`repo_common_path()`, so we also have to add logic to free the returned
strings.
This refactoring also allows us to remove `repo_common_pathv()` as well
as `get_pathname()` from the public interface.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up. cf. <Z6G-toOJjMmK8iJG@pks.im>
* ms/refspec-cleanup:
refspec: relocate apply_refspecs and related funtions
refspec: relocate matching related functions
remote: rename query_refspecs functions
refspec: relocate refname_matches_negative_refspec_item
remote: rename function omit_name_by_refspec
|
|
Rename the function `omit_name_by_refspec()` to
`refname_matches_negative_refspec_item()` to provide clearer intent.
The previous function name was vague and did not accurately describe its
purpose. By using `refname_matches_negative_refspec_item`, make the
function's purpose more intuitive, clarifying that it checks if a
reference name matches any negative refspec.
Rename function parameters for consistency with existing naming
conventions. Use `refname` instead of `name` to align with terminology
in `refs.h`.
Remove the redundant doc comment since the function name is now
self-explanatory.
Signed-off-by: Meet Soni <meetsoni3017@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following the procedure we established to introduce breaking
changes for Git 3.0, allow an early opt-in for removing support of
$GIT_DIR/branches/ and $GIT_DIR/remotes/ directories to configure
remotes.
* ps/3.0-remote-deprecation:
remote: announce removal of "branches/" and "remotes/"
builtin/pack-redundant: remove subcommand with breaking changes
ci: repurpose "linux-gcc" job for deprecations
ci: merge linux-gcc-default into linux-gcc
Makefile: wire up build option for deprecated features
|
|
Back when Git was in its infancy, remotes were configured via separate
files in "branches/" (back in 2005). This mechanism was replaced later
that year with the "remotes/" directory. Both mechanisms have eventually
been replaced by config-based remotes, and it is very unlikely that
anybody still uses these directories to configure their remotes.
Both of these directories have been marked as deprecated, one in 2005
and the other one in 2011. Follow through with the deprecation and
finally announce the removal of these features in Git 3.0.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
[jc: with a small tweak to the help message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More code paths have a repository passed through the callchain,
instead of assuming the primary the_repository object.
* ps/the-repository:
match-trees: stop using `the_repository`
graph: stop using `the_repository`
add-interactive: stop using `the_repository`
tmp-objdir: stop using `the_repository`
resolve-undo: stop using `the_repository`
credential: stop using `the_repository`
mailinfo: stop using `the_repository`
diagnose: stop using `the_repository`
server-info: stop using `the_repository`
send-pack: stop using `the_repository`
serve: stop using `the_repository`
trace: stop using `the_repository`
pager: stop using `the_repository`
progress: stop using `the_repository`
|
|
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
|
|
"git fetch" honors "remote.<remote>.followRemoteHEAD" settings to
tweak the remote-tracking HEAD in "refs/remotes/<remote>/HEAD".
* bf/fetch-set-head-config:
remote set-head: set followRemoteHEAD to "warn" if "always"
fetch set_head: add warn-if-not-$branch option
fetch set_head: move warn advice into advise_if_enabled
fetch: add configuration for set_head behaviour
|
|
When "git fetch $remote" notices that refs/remotes/$remote/HEAD is
missing and discovers what branch the other side points with its
HEAD, refs/remotes/$remote/HEAD is updated to point to it.
* bf/set-head-symref:
fetch set_head: handle mirrored bare repositories
fetch: set remote/HEAD if it does not exist
refs: add create_only option to refs_update_symref_extended
refs: add TRANSACTION_CREATE_EXISTS error
remote set-head: better output for --auto
remote set-head: refactor for readability
refs: atomically record overwritten ref in update_symref
refs: standardize output of refs_read_symbolic_ref
t/t5505-remote: test failure of set-head
t/t5505-remote: set default branch to main
|
|
Stop using `the_repository` in the "progress" subsystem by passing in a
repository when initializing `struct progress`. Furthermore, store a
pointer to the repository in that struct so that we can pass it to the
trace2 API when logging information.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "remote set-head" manually it is unlikely, that the user
would actually like to have "fetch" always update the remote/HEAD. On
the contrary, it is more likely, that the user would expect remote/HEAD
to stay the way they manually set it, and just forgot about having
"followRemoteHEAD" set to "always".
When "followRemoteHEAD" is set to "always" make running "remote
set-head" change the config to "warn".
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bf/set-head-symref:
fetch set_head: handle mirrored bare repositories
fetch: set remote/HEAD if it does not exist
refs: add create_only option to refs_update_symref_extended
refs: add TRANSACTION_CREATE_EXISTS error
remote set-head: better output for --auto
remote set-head: refactor for readability
refs: atomically record overwritten ref in update_symref
refs: standardize output of refs_read_symbolic_ref
t/t5505-remote: test failure of set-head
t/t5505-remote: set default branch to main
|
|
In 9b1cb5070f (builtin: add a repository parameter for builtin
functions, 2024-09-13) the repository was passed down to all builtin
commands. This allowed the repository to be passed down to lower layers
without depending on the global `the_repository` variable.
Continue this work by also passing down the repository parameter from
the command to sub-commands. This will help pass down the repository to
other subsystems and cleanup usage of global variables like
'the_repository' and 'the_hash_algo'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow the caller to specify that it only wants to update the symref if
it does not already exist. Silently ignore the error from the
transaction API if the symref already exists.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, set-head --auto will print a message saying "remote/HEAD set
to branch", which implies something was changed.
Change the output of --auto, so the output actually reflects what was
done: a) set a previously unset HEAD, b) change HEAD because remote
changed or c) no updates. As edge cases, if HEAD is changed from
a previous symbolic reference that was not a remote branch, explicitly
call attention to this fact, and also notify the user if the previous
reference was not a symbolic reference.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make two different readability refactors:
Rename strbufs "buf" and "buf2" to something more explanatory.
Instead of calling get_main_ref_store(the_repository) multiple times,
call it once and store the result in a new refs variable. Although this
change probably offers some performance benefits, the main purpose is to
shorten the line lengths of function calls using this variable.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test coverage was missing a test for the failure branch of remote
set-head auto's output. Add the missing text and while we are at it,
correct a small grammatical mistake in the error's output ("setup" is
the noun, "set up" is the verb).
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The refspec struct keeps two matched arrays: one for the refspec_item
structs and one for the original raw refspec strings. The main reason
for this is that there are other users of refspec_item that do not care
about the raw strings. But it does make managing the refspec struct
awkward, as we must keep the two arrays in sync. This has led to bugs in
the past (both leaks and double-frees).
Let's just store a copy of the raw refspec string directly in each
refspec_item struct. This simplifies the handling at a small cost:
1. Direct callers of refspec_item_init() will now get an extra copy of
the refspec string, even if they don't need it. This should be
negligible, as the struct is already allocating two strings for the
parsed src/dst values (and we tend to only do it sparingly anyway
for things like the TAG_REFSPEC literal).
2. Users of refspec_appendf() will now generate a temporary string,
copy it, and then free the result (versus handing off ownership of
the temporary string). We could get around this by having a "nodup"
variant of refspec_item_init(), but it doesn't seem worth the extra
complexity for something that is not remotely a hot code path.
Code which accesses refspec->raw now needs to look at refspec->item.raw.
Other callers which just use refspec_item directly can remain the same.
We'll free the allocated string in refspec_item_clear(), which they
should be calling anyway to free src/dst.
One subtle note: refspec_item_init() can return an error, in which case
we'll still have set its "raw" field. But that is also true of the "src"
and "dst" fields, so any caller which does not _clear() the failed item
is already potentially leaking. In practice most code just calls die()
on an error anyway, but you can see the exception in valid_fetch_refspec(),
which does correctly call _clear() even on error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A refspec struct contains zero or more refspec_item structs, along with
matching "raw" strings. The items and raw strings are kept in separate
arrays, but those arrays will always have the same length (because we
write them only via refspec_append_nodup(), which grows both). This can
lead to bugs when manipulating the array, since the arrays and lengths
must be modified in lockstep. For example, the bug fixed in the previous
commit, which forgot to decrement raw_nr.
So let's get rid of "raw_nr" and have only "nr", making this kind of bug
impossible (and also making it clear that the two are always matched,
something that existing code already assumed but was not guaranteed by
the interface).
Even though we'd expect "alloc" and "raw_alloc" to likewise move in
lockstep, we still need to keep separate counts there if we want to
continue to use ALLOC_GROW() for both.
Conceptually this would all be simpler if refspec_item just held onto
its own raw string, and we had a single array. But there are callers
which use refspec_item outside of "struct refspec" (and so don't hold on
to a matching "raw" string at all), which we'd possibly need to adjust.
So let's not worry about refactoring that for now, and just get rid of
the redundant count variable. That is the first step on the road to
combining them anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
