| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our hope is that the number of code paths that falsely trigger
warnings with the -Wunreachable-code compilation option are small,
and they can be worked around case-by-case basis, like we just did
in the previous commit. If we need such a workaround a bit more
often, however, we may benefit from a more generic and descriptive
facility that helps document the cases we need such workarounds.
Side note: if we need the workaround all over the place, it
simply means -Wunreachable-code is not a good tool for us to
save engineering effort to catch mistakes. We are still
exploring if it helps us, so let's assume that it is not the
case.
Introduce NOT_CONSTANT() macro, with which, the developer can tell
the compiler:
Do not optimize this expression out, because, despite whatever
you are told by the system headers, this expression should *not*
be treated as a constant.
and use it as a replacement for the workaround we used that was
somewhat specific to the sigfillset case. If the compiler already
knows that the call to sigfillset() cannot fail on a particular
platform it is compiling for and declares that the if() condition
would not hold, it is plausible that the next version of the
compiler may learn that sigfillset() that never fails would not
touch errno and decide that in this sequence:
errno = 0;
sigfillset(&all)
if (errno)
die_errno("sigfillset");
the if() statement will never trigger. Marking that the value
returned by sigfillset() cannot be a constant would document our
intention better and would not break with such a new version of
compiler that is even more "clever". With the marco, the above
sequence can be rewritten:
if (NOT_CONSTANT(sigfillset(&all)))
die_errno("sigfillset");
which looks almost like other innocuous annotations we have,
e.g. UNUSED.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since enabling -Wunreachable-code, builds with clang on macOS now fail,
complaining that the die_errno() call in:
if (sigfillset(&all))
die_errno("sigfillset");
is unreachable. On that platform the manpage documents that sigfillset()
always returns success, and presumably the implementation is a macro or
inline function that does so in a way that is transparent to the
compiler.
But we should continue to check on other platforms, since POSIX says it
may return an error.
We could solve this with a compile-time knob to split the two cases
(assuming success on macOS and checking for the error elsewhere). But we
can also work around it more directly by relying on errno to check the
outcome (since POSIX dictates that errno will be set on error). And that
works around the compiler's cleverness, since it doesn't know the
semantics of errno (though I suppose if sigfillset() is simple enough,
it could perhaps realize that no writes to errno are possible; however
this does seem to work in practice).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the past, we used to execute `git gc --auto` as part of our automatic
housekeeping routines. As git-gc(1) may require quite some time to
perform the housekeeping, it knows to detach itself and run in the
background so that the user can continue their work.
Eventually, we refactored our automatic housekeeping to instead use the
more flexible git-maintenance(1) command. The upside of this new infra
is that the user can configure which maintenance tasks are performed, at
least to a certain degree. So while it continues to run git-gc(1) by
default, it can also be adapted to e.g. use git-multi-pack-index(1) for
maintenance of the object database.
The auto-detach of the new infra is somewhat broken though once the user
configures non-standard tasks. The problem is essentially that we detach
at the wrong level in the process hierarchy: git-maintenance(1) never
detaches itself, but instead it continues to be git-gc(1) which does.
When configured to only run the git-gc(1) maintenance task, then the
result is basically the same as before. But when configured to run other
tasks, then git-maintenance(1) will wait for these to run to completion.
Even worse, it may be that git-gc(1) runs concurrently with other
housekeeping tasks, stomping on each others feet.
Fix this bug by asking git-gc(1) to not detach when it is being invoked
via git-maintenance(1). Instead, git-maintenance(1) now respects a new
config "maintenance.autoDetach", the equivalent of "gc.autoDetach", and
detaches itself into the background when running as part of our auto
maintenance. This should continue to behave the same for all users which
use the git-gc(1) task, only. For others though, it means that we now
properly perform all tasks in the background. The default behaviour of
git-maintenance(1) when executed by the user does not change, it will
remain in the foreground unless they pass the `--detach` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The intention is to use it in `git var GIT_SHELL_PATH`, therefore we
need this function to stop being file-local only.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 776297548e (Do not use SHELL_PATH from build system in
prepare_shell_cmd on Windows, 2012-04-17), the hard-coded path to the
Unix shell was replaced by passing `sh` instead when executing Unix
shell scripts in Git.
This was done because the hard-coded path to the Unix shell is incorrect
on Windows because it not only is a Unix-style absolute path instead of
a Windows one, but Git uses the runtime prefix feature on Windows, i.e.
the correct path cannot be hard-coded.
Naturally, the `sh` argument will be resolved to the full path of said
executable eventually.
To help fixing the bug where `git var GIT_SHELL_PATH` currently does not
reflect that logic, but shows that incorrect hard-coded Unix-style
absolute path, let's resolve the full path to the `sh` executable early
in the `git_shell_path()` function so that we can use it in `git var`,
too, and be sure that the output is equivalent to what `run_command()`
does when it is asked to execute a command-line using a Unix shell.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This encapsulates the platform-specific logic better.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A CPP macro USE_THE_REPOSITORY_VARIABLE is introduced to help
transition the codebase to rely less on the availability of the
singleton the_repository instance.
* ps/use-the-repository:
hex: guard declarations with `USE_THE_REPOSITORY_VARIABLE`
t/helper: remove dependency on `the_repository` in "proc-receive"
t/helper: fix segfault in "oid-array" command without repository
t/helper: use correct object hash in partial-clone helper
compat/fsmonitor: fix socket path in networked SHA256 repos
replace-object: use hash algorithm from passed-in repository
protocol-caps: use hash algorithm from passed-in repository
oidset: pass hash algorithm when parsing file
http-fetch: don't crash when parsing packfile without a repo
hash-ll: merge with "hash.h"
refs: avoid include cycle with "repository.h"
global: introduce `USE_THE_REPOSITORY_VARIABLE` macro
hash: require hash algorithm in `empty_tree_oid_hex()`
hash: require hash algorithm in `is_empty_{blob,tree}_oid()`
hash: make `is_null_oid()` independent of `the_repository`
hash: convert `oidcmp()` and `oideq()` to compare whole hash
global: ensure that object IDs are always padded
hash: require hash algorithm in `oidread()` and `oidclr()`
hash: require hash algorithm in `hasheq()`, `hashcmp()` and `hashclr()`
hash: drop (mostly) unused `is_empty_{blob,tree}_sha1()` functions
|
|
Building with "-Werror -Wwrite-strings" is now supported.
* ps/no-writable-strings: (27 commits)
config.mak.dev: enable `-Wwrite-strings` warning
builtin/merge: always store allocated strings in `pull_twohead`
builtin/rebase: always store allocated string in `options.strategy`
builtin/rebase: do not assign default backend to non-constant field
imap-send: fix leaking memory in `imap_server_conf`
imap-send: drop global `imap_server_conf` variable
mailmap: always store allocated strings in mailmap blob
revision: always store allocated strings in output encoding
remote-curl: avoid assigning string constant to non-const variable
send-pack: always allocate receive status
parse-options: cast long name for OPTION_ALIAS
http: do not assign string constant to non-const field
compat/win32: fix const-correctness with string constants
pretty: add casts for decoration option pointers
object-file: make `buf` parameter of `index_mem()` a constant
object-file: mark cached object buffers as const
ident: add casts for fallback name and GECOS
entry: refactor how we remove items for delayed checkouts
line-log: always allocate the output prefix
line-log: stop assigning string constant to file parent buffer
...
|
|
Varargs functions that are unannotated as printf-like or execl-like
have been annotated as such.
* jc/varargs-attributes:
__attribute__: add a few missing format attributes
__attribute__: mark some functions with LAST_ARG_MUST_BE_NULL
__attribute__: remove redundant attribute declaration for git_die_config()
__attribute__: trace2_region_enter_printf() is like "printf"
|
|
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The last part of the parameter list the function takes is like
parameters to printf. Mark it as such.
An existing call that formats a value of type size_t using "%d" was
found by the compiler with the help with this annotation; fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to enable `-Wwrite-strings`, which changes the type of
string constants to `const char[]`. Fix various sites where we assign
such constants to non-const variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a trace point in start_command so we can see the full
command invocation without having to resort to strace/code inspection.
For example:
$ GIT_TRACE=1 git test foo
git.c:755 trace: exec: git-test foo
run-command.c:657 trace: run_command: git-test foo
run-command.c:657 trace: run_command: 'echo $*' foo
run-command.c:749 trace: start_command: /bin/sh -c 'echo $* "$@"' 'echo $*' foo
Prior changes have made the documentation around the internals of the
alias command execution clearer, but I have still found this detailed
view of the aliased command being run helpful for debugging purposes.
A test case is added to ensure the full command output is present in
the execution flow.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `run_auto_maintenance()` function is responsible for spawning a new
`git maintenance run --auto` process. To do so, it sets up the `sturct
child_process` and then runs it by executing `run_command()` directly.
This is rather inflexible in case callers want to modify the child
process somewhat, e.g. to redirect stderr or stdout.
Introduce a new `prepare_auto_maintenance()` function to plug this gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bisect visualize" stopped running "gitk" on Git for Windows
when the command was reimplemented in C around Git 2.34 timeframe.
This has been corrected.
* ma/locate-in-path-for-windows:
docs: update when `git bisect visualize` uses `gitk`
compat/mingw: implement a native locate_in_PATH()
run-command: conditionally define locate_in_PATH()
|
|
This commit doesn't change any behaviour by itself, but allows us to easily
define compat replacements for locate_in_PATH(). It prepares us for the next
commit that adds a native Windows implementation of locate_in_PATH().
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
|
|
Simplify error message when run-command fails to start a command.
* rs/run-command-exec-error-on-noent:
run-command: report exec error even on ENOENT
t1800: loosen matching of error message for bad shebang
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If execve(2) fails with ENOENT and we report the error, we use the
format "cannot run %s", followed by the actual error message. For other
errors we use "cannot exec '%s'".
Stop making this subtle distinction and use the second format for all
execve(2) errors. This simplifies the code and makes the prefix more
precise by indicating the failed operation. It also allows us to
slightly simplify t1800.16.
On Windows -- which lacks execve(2) -- we already use a single format in
all cases: "cannot spawn %s".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the build problem with NO_PTHREADS defined, a fallout from
recent header file shuffling.
* tb/run-command-needs-alloc-h:
run-command.c: fix missing include under `NO_PTHREADS`
|
|
Git 2.41-rc0 fails to compile run-command.c with `NO_PTHREADS` defined,
i.e.
$ make NO_PTHREADS=1 run-command.o
as `ALLOC_GROW()` macro is used in the `atexit()` emulation but the
macro definition is not available.
This bisects to 36bf195890 (alloc.h: move ALLOC_GROW() functions from
cache.h, 2023-02-24), which replaced includes of <cache.h> with
<alloc.h>, which is the new home of `ALLOC_GROW()` (and
`ALLOC_GROW_BY()`).
We can see that run-command.c is the only one that try to use these
macros without including <alloc.h>.
$ git grep -l -e '[^_]ALLOC_GROW(' -e 'ALLOC_GROW_BY(' \*.c | sort >/tmp/1
$ git grep -l 'alloc\.h' \*.c | sort >/tmp/2
$ comm -23 /tmp/[12]
compat/simple-ipc/ipc-unix-socket.c
run-command.c
The "compat/" file only talks about the macro in the comment,
and is not broken.
We could fix this by conditionally including "alloc.h" when
`NO_PTHREADS` is defined. But we have relatively few examples of
conditional includes throughout the tree[^1].
Instead, include "alloc.h" unconditionally in run-command.c to allow it
to successfully compile even when NO_PTHREADS is defined.
[^1]: With `git grep -E -A1 '#if(n)?def' -- **/*.c | grep '#include' -B1`.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After forking but before exec-ing a command, we install special
error/warn/die handlers in the child. These ignore the error messages
they get, since the idea is that they shouldn't be called in the first
place.
Arguably they could pass along that error message _in addition_ to
saying "error() should not be called in a child", but since the whole
point is to avoid any conflicts on stdio/malloc locks, etc, we're better
to just keep these simple. Seeing them trigger is effectively a bug, and
the developer is probably better off grabbing a stack trace.
But we do want to mark the functions so that -Wunused-parameter doesn't
complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While it makes sense not to inherit stdin from the parent process to
avoid deadlocking, it's not necessary to completely ban stdin to
children. An informed user should be able to configure stdin safely. By
setting `some_child.process.no_stdin=1` before calling `get_next_task()`
we provide a reasonable default behavior but enable users to set up
stdin streaming for themselves during the callback.
`some_child.process.stdout_to_stderr`, however, remains unmodifiable by
`get_next_task()` - the rest of the run_processes_parallel() API depends
on child output in stderr.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove code that's been unused since it was added in
c553c72eed6 (run-command: add an asynchronous parallel child
processor, 2015-12-15).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos in code comments which repeat various words. Most of the
cases are simple in that they repeat a word that usually cannot be
repeated in a grammatically correct sentence. Just remove the
incorrectly duplicated word in these cases and rewrap text, if needed.
A tricky case is usage of "that that", which is sometimes grammatically
correct. However, an instance of this in "t7527-builtin-fsmonitor.sh"
doesn't need two words "that", because there is only one daemon being
discussed, so replace the second "that" with "the".
Reword code comment "entries exist on on-disk index" in function
update_one in file cache-tree.c, by replacing incorrect preposition "on"
with "in".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct pthread API usage.
* sx/pthread-error-check-fix:
maintenance: compare output of pthread functions for inequality with 0
|
|
The documentation for pthread_create and pthread_sigmask state that:
"On success, pthread_create() returns 0;
on error, it returns an error number"
As such, we ought to check for an error
by seeing if the output is not 0.
Checking for "less than" is a mistake
as the error code numbers can be greater than 0.
Signed-off-by: Seija <doremylover123@gmail.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the run-command API.
* rs/no-more-run-command-v:
replace and remove run_command_v_opt()
replace and remove run_command_v_opt_cd_env_tr2()
replace and remove run_command_v_opt_tr2()
replace and remove run_command_v_opt_cd_env()
use child_process members "args" and "env" directly
use child_process member "args" instead of string array variable
sequencer: simplify building argument list in do_exec()
bisect--helper: factor out do_bisect_run()
bisect: simplify building "checkout" argument list
am: simplify building "show" argument list
run-command: fix return value comment
merge: remove always-the-same "verbose" arguments
|
|
Replace the remaining calls of run_command_v_opt() with run_command()
calls and explict struct child_process variables. This is more verbose,
but not by much overall. The code becomes more flexible, e.g. it's easy
to extend to conditionally add a new argument.
Then remove the now unused function and its own flag names, simplifying
the run-command API.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The convenience function run_command_v_opt_cd_env_tr2() has no external
callers left. Inline it and remove it from the API.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The convenience function run_command_v_opt_tr2() is only used by a
single caller. Use struct child_process and run_command() directly
instead and remove the underused function.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
run_command_v_opt_cd_env() is only used in an example in a comment. Use
the struct child_process member "env" and run_command() directly instead
and then remove the unused convenience function.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
As with the *_fn members removed in a preceding commit, let's not copy
the "processes" member of the "struct run_process_parallel_opts" over
to the "struct parallel_processes".
In this case we need the number of processes for the kill_children()
function, which will be called from a signal handler. To do that
adjust this code added in c553c72eed6 (run-command: add an
asynchronous parallel child processor, 2015-12-15) so that we use a
dedicated "struct parallel_processes_for_signal" for passing data to
the signal handler, in addition to the "struct parallel_process" it'll
now have access to our "opts" variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Continue the migration away from the "max_processes" member of "struct
parallel_processes" to the "processes" member of the "struct
run_process_parallel_opts", in this case we needed to pass the "opts"
further down into pp_cleanup() and pp_buffer_stderr().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Neither the "processes" nor "max_processes" members ever change after
their initialization, and they're always equivalent, but some existing
code used "pp->max_processes" when we were already passing the "opts"
to the function, let's use the "opts" directly instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with the *_fn members removed in a preceding commit, let's not copy
the "data" member of the "struct run_process_parallel_opts" over to
the "struct parallel_processes". Now that we're passing the "opts"
down there's no reason to do so.
This makes the code easier to follow, as we have a "const" attribute
on the "struct run_process_parallel_opts", but not "struct
parallel_processes". We do not alter the "ungroup" argument, so
storing it in the non-const structure would make this control flow
less obvious.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with the *_fn members removed in the preceding commit, let's not
copy the "ungroup" member of the "struct run_process_parallel_opts"
over to the "struct parallel_processes". Now that we're passing the
"opts" down there's no reason to do so.
This makes the code easier to follow, as we have a "const" attribute
on the "struct run_process_parallel_opts", but not "struct
parallel_processes". We do not alter the "ungroup" argument, so
storing it in the non-const structure would make this control flow
less obvious.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only remaining reason for copying the callbacks in the "struct
run_process_parallel_opts" over to the "struct parallel_processes" was
to avoid two if/else statements in case the "start_failure" and
"task_finished" callbacks were NULL.
Let's handle those cases in pp_start_one() and pp_collect_finished()
instead, and avoid the default_* stub functions, and the need to copy
this data around.
Organizing the code like this made more sense before the "struct
run_parallel_parallel_opts" existed, as we'd have needed to pass each
of these as a separate parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a "const" to two "struct parallel_processes" parameters where
we're not modifying anything in "pp". For kill_children() we'll call
it from both the signal handler, and from run_processes_parallel()
itself. Adding a "const" there makes it clear that we don't need to
modify any state when killing our children.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Have the users of the "run_processes_parallel_tr2()" function use
"run_processes_parallel()" instead. In preceding commits the latter
was refactored to take a "struct run_process_parallel_opts" argument,
since the only reason for "run_processes_parallel_tr2()" to exist was
to take arguments that are now a part of that struct we can do away
with it.
See ee4512ed481 (trace2: create new combined trace facility,
2019-02-22) for the addition of the "*_tr2()" variant of the function,
it was used by every caller except "t/helper/test-run-command.c"..
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in fd3aaf53f71 (run-command: add an "ungroup" option to
run_process_parallel(), 2022-06-07) which added the "ungroup" passing
it to "run_process_parallel()" via the global
"run_processes_parallel_ungroup" variable was a compromise to get the
smallest possible regression fix for "maint" at the time.
This follow-up to that is a start at passing that parameter and others
via a new "struct run_process_parallel_opts", as the earlier
version[1] of what became fd3aaf53f71 did.
Since we need to change all of the occurrences of "n" to
"opt->SOMETHING" let's take the opportunity and rename the terse "n"
to "processes". We could also have picked "max_processes", "jobs",
"threads" etc., but as the API is named "run_processes_parallel()"
let's go with "processes".
Since the new "run_processes_parallel()" function is able to take an
optional "tr2_category" and "tr2_label" via the struct we can at this
point migrate all of the users of "run_processes_parallel_tr2()" over
to it.
But let's not migrate all the API users yet, only the two users that
passed the "ungroup" parameter via the
"run_processes_parallel_ungroup" global
1. https://lore.kernel.org/git/cover-v2-0.8-00000000000-20220518T195858Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a designated initializer to initialize those parts of pp_init()
that don't need any conditionals for their initialization, this sets
us on a path to pp_init() itself into mostly a validation and
allocation function.
Since we're doing that we can add "const" to some of the members of
the "struct parallel_processes", which helps to clarify and
self-document this code. E.g. we never alter the "data" pointer we
pass t user callbacks, nor (after the preceding change to stop
invoking online_cpus()) do we change "max_processes", the same goes
for the "ungroup" option.
We can also do away with a call to strbuf_init() in favor of macro
initialization, and to rely on other fields being NULL'd or zero'd.
Making members of a struct "const" rather that the pointer to the
struct itself is usually painful, as e.g. it precludes us from
incrementally setting up the structure. In this case we only set it up
with the assignment in run_process_parallel() and pp_init(), and don't
pass the struct pointer around as "const", so making individual
members "const" is worth the potential hassle for extra safety.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
