| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The changed-path Bloom filters feature has proven stable and reliable
over several years of use, delivering significant performance
improvement for file history computation in large monorepos. Currently
a user can opt-in to writing the changed-path Bloom filters using the
"--changed-paths" option to "git commit-graph write". The filters will
be persisted until the user drops the filters using the
"--no-changed-paths" option. For this functionality, refer to 0087a87ba8
(commit-graph: persist existence of changed-paths, 2020-07-01).
Large monorepos using Git's background maintenance to build and update
commit-graph files could use an easy switch to enable this feature
without a foreground computation. In this commit, we're proposing a new
config option "commitGraph.changedPaths":
* If "true", "git commit-graph write" will write Bloom filters,
equivalent to passing "--changed-paths";
* If "false" or "unset", Bloom filters will be written during "git
commit-graph write" only if the filters already exist in the current
commit-graph file. This matches the default behaviour of "git
commit-graph write" without any "--[no-]changed-paths" option. Note
"false" can disable a previous "true" config value but doesn't imply
"--no-changed-paths".
This config will always respect the precedence of command line option
"--[no-]changed-paths".
We also set this new config as optional recommended config in scalar to
turn on this feature for large repos.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Emily Yang <emilyyang.git@gmail.com>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the early days of Git, Perl was used quite prominently throughout the
project. This has changed significantly as almost all of the executables
we ship nowadays have eventually been rewritten in C. Only a handful of
subsystems remain that require Perl:
- gitweb, a read-only web interface.
- A couple of scripts that allow importing repositories from GNU Arch,
CVS and Subversion.
- git-send-email(1), which can be used to send mails.
- git-request-pull(1), which is used to request somebody to pull from
a URL by sending an email.
- git-filter-branch(1), which uses Perl with the `--state-branch`
option. This command is typically recommended against nowadays in
favor of git-filter-repo(1).
- Our Perl bindings for Git.
- The netrc Git credential helper.
None of these subsystems can really be considered to be part of the
"core" of Git, and an installation without them is fully functional.
It is more likely than not that an end user wouldn't even notice that
any features are missing if those tools weren't installed. But while
Perl nowadays very much is an optional dependency of Git, there is a
significant limitation when Perl isn't available: developers cannot run
our test suite.
Preceding commits have started to lift this restriction by removing the
strict dependency on Perl in many central parts of the test library. But
there are still many tests that rely on small Perl helpers to do various
different things.
Introduce a new PERL_TEST_HELPERS prerequisite that guards all tests
that require Perl. This prerequisite is explicitly different than the
preexisting PERL prerequisite:
- PERL records whether or not features depending on the Perl
interpreter are built.
- PERL_TEST_HELPERS records whether or not a Perl interpreter is
available for our tests.
By having these two separate prerequisites we can thus distinguish
between tests that inherently depend on Perl because the underlying
feature does, and those tests that depend on Perl because the test
itself is using Perl.
Adapt all tests to set the PERL_TEST_HELPERS prerequisite as needed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test-repository test helper zeroes out `the_repository` such that it
can be sure that our codebase only ends up using the supplied repository
that we initialize in the respective helper functions. This does cause
memory leaks though as the data that `the_repository` has been holding
onto is not referenced anymore.
Fix this by calling `repo_clear()` instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier we stopped relying on commit-graph that (still) records
information about commits that are lost from the object store,
which has negative performance implications. The default has been
flipped to disable this pessimization.
* ps/commit-graph-less-paranoid:
commit-graph: disable GIT_COMMIT_GRAPH_PARANOIA by default
|
|
Code clean-up for jk/chunk-bounds topic.
* jk/chunk-bounds-more:
commit-graph: mark chunk error messages for translation
commit-graph: drop verify_commit_graph_lite()
commit-graph: check order while reading fanout chunk
commit-graph: use fanout value for graph size
commit-graph: abort as soon as we see a bogus chunk
commit-graph: clarify missing-chunk error messages
commit-graph: drop redundant call to "lite" verification
midx: check consistency of fanout table
commit-graph: handle overflow in chunk_size checks
|
|
In 7a5d604443 (commit: detect commits that exist in commit-graph but not
in the ODB, 2023-10-31), we have introduced a new object existence check
into `repo_parse_commit_internal()` so that we do not parse commits via
the commit-graph that don't have a corresponding object in the object
database. This new check of course comes with a performance penalty,
which the commit put at around 30% for `git rev-list --topo-order`. But
there are in fact scenarios where the performance regression is even
higher. The following benchmark against linux.git with a fully-build
commit-graph:
Benchmark 1: git.v2.42.1 rev-list --count HEAD
Time (mean ± σ): 658.0 ms ± 5.2 ms [User: 613.5 ms, System: 44.4 ms]
Range (min … max): 650.2 ms … 666.0 ms 10 runs
Benchmark 2: git.v2.43.0-rc1 rev-list --count HEAD
Time (mean ± σ): 1.333 s ± 0.019 s [User: 1.263 s, System: 0.069 s]
Range (min … max): 1.302 s … 1.361 s 10 runs
Summary
git.v2.42.1 rev-list --count HEAD ran
2.03 ± 0.03 times faster than git.v2.43.0-rc1 rev-list --count HEAD
While it's a noble goal to ensure that results are the same regardless
of whether or not we have a potentially stale commit-graph, taking twice
as much time is a tough sell. Furthermore, we can generally assume that
the commit-graph will be updated by git-gc(1) or git-maintenance(1) as
required so that the case where the commit-graph is stale should not at
all be common.
With that in mind, default-disable GIT_COMMIT_GRAPH_PARANOIA and restore
the behaviour and thus performance previous to the mentioned commit. In
order to not be inconsistent, also disable this behaviour by default in
`lookup_commit_in_graph()`, where the object existence check has been
introduced right at its inception via f559d6d45e (revision: avoid
hitting packfiles when commits are in commit-graph, 2021-08-09).
This results in another speedup in commands that end up calling this
function, even though it's less pronounced compared to the above
benchmark. The following has been executed in linux.git with ~1.2
million references:
Benchmark 1: GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.947 s ± 0.003 s [User: 2.412 s, System: 0.534 s]
Range (min … max): 2.943 s … 2.949 s 3 runs
Benchmark 2: GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.724 s ± 0.030 s [User: 2.207 s, System: 0.514 s]
Range (min … max): 2.704 s … 2.759 s 3 runs
Summary
GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted ran
1.08 ± 0.01 times faster than GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
So whereas 7a5d604443 initially introduced the logic to start doing an
object existence check in `repo_parse_commit_internal()` by default, the
updated logic will now instead cause `lookup_commit_in_graph()` to stop
doing the check by default. This behaviour continues to be tweakable by
the user via the GIT_COMMIT_GRAPH_PARANOIA environment variable.
Note that this requires us to amend some tests to manually turn on the
paranoid checks again. This is because we cause repository corruption by
manually deleting objects which are part of the commit graph already.
These circumstances shouldn't usually happen in repositories.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We read the fanout chunk, storing a pointer to it, but only confirm that
the entries are monotonic in a final "lite" verification step. Let's
move that into the actual OIDF chunk callback, so that we can report
problems immediately (for all the reasons given in the previous
"commit-graph: abort as soon as we see a bogus chunk" commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit-graph, midx, and pack idx files all have both a lookup table of
oids and an oid fanout table. In midx and pack idx files, we take the
final entry of the fanout table as the source of truth for the number of
entries, and then verify that the size of the lookup table matches that.
But for commit-graph files, we do the opposite: we use the size of the
lookup table as the source of truth, and then check the final fanout
entry against it.
As noted in 4169d89645 (commit-graph: check consistency of fanout
table, 2023-10-09), either is correct. But there are a few reasons to
prefer the fanout table as the source of truth:
1. The fanout entries are 32-bits on disk, and that defines the
maximum number of entries we can store. But since the size of the
lookup table is only bounded by the filesystem, it can be much
larger. And hence computing it as the commit-graph does means that
we may truncate the result when storing it in a uint32_t.
2. We read the fanout first, then the lookup table. If we're verifying
the chunks as we read them, then we'd want to take the fanout as
truth (we have nothing yet to check it against) and then we can
check that the lookup table matches what we already know.
3. It is pointlessly inconsistent with the midx and pack idx code.
Since the three have to do similar size and bounds checks, it is
easier to reason about all three if they use the same approach.
So this patch moves the assignment of g->num_commits to the fanout
parser, and then we can check the size of the lookup chunk as soon as we
try to load it.
There's already a test covering this situation, which munges the final
fanout entry to 2^32-1. In the current code we complain that it does not
agree with the table size. But now that we treat the munged value as the
source of truth, we'll complain that the lookup table is the wrong size
(again, either is correct). So we'll have to update the message we
expect (and likewise for an earlier test which does similar munging).
There's a similar test for this situation on the midx side, but rather
than making a very-large fanout value, it just truncates the lookup
table. We could do that here, too, but the very-large fanout value
actually shows an interesting corner case. On a 32-bit system,
multiplying to find the expected table size would cause an integer
overflow. Using st_mult() would detect that, but cause us to die()
rather than falling back to the non-graph code path. Checking the size
using division (as we do with existing chunk-size checks) avoids the
overflow entirely, and the test demonstrates this when run on a 32-bit
system.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a required commit-graph chunk cannot be loaded, we leave its entry
in the struct NULL, and then later complain that it is missing. But
that's just one reason we might not have loaded it, as we also do some
data quality checks.
Let's switch these messages to say "missing or corrupted", which is
exactly what the midx code says for the same cases. Likewise, we'll use
the same phrasing and capitalization as those for consistency. And while
we're here, we can mark them for translation (just like the midx ones).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step to deprecate test_i18ngrep.
* jc/test-i18ngrep:
tests: teach callers of test_i18ngrep to use test_grep
test framework: further deprecate test_i18ngrep
|
|
The codepath to traverse the commit-graph learned to notice that a
commit is missing (e.g., corrupt repository lost an object), even
though it knows something about the commit (like its parents) from
what is in commit-graph.
* ps/do-not-trust-commit-graph-blindly-for-existence:
commit: detect commits that exist in commit-graph but not in the ODB
commit-graph: introduce envvar to disable commit existence checks
|
|
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit graphs can become stale and contain references to commits that do
not exist in the object database anymore. Theoretically, this can lead
to a scenario where we are able to successfully look up any such commit
via the commit graph even though such a lookup would fail if done via
the object database directly.
As the commit graph is mostly intended as a sort of cache to speed up
parsing of commits we do not want to have diverging behaviour in a
repository with and a repository without commit graphs, no matter
whether they are stale or not. As commits are otherwise immutable, the
only thing that we really need to care about is thus the presence or
absence of a commit.
To address potentially stale commit data that may exist in the graph,
our `lookup_commit_in_graph()` function will check for the commit's
existence in both the commit graph, but also in the object database. So
even if we were able to look up the commit's data in the graph, we would
still pretend as if the commit didn't exist if it is missing in the
object database.
We don't have the same safety net in `parse_commit_in_graph_one()`
though. This function is mostly used internally in "commit-graph.c"
itself to validate the commit graph, and this usage is fine. We do
expose its functionality via `parse_commit_in_graph()` though, which
gets called by `repo_parse_commit_internal()`, and that function is in
turn used in many places in our codebase.
For all I can see this function is never used to directly turn an object
ID into a commit object without additional safety checks before or after
this lookup. What it is being used for though is to walk history via the
parent chain of commits. So when commits in the parent chain of a graph
walk are missing it is possible that we wouldn't notice if that missing
commit was part of the commit graph. Thus, a query like `git rev-parse
HEAD~2` can succeed even if the intermittent commit is missing.
It's unclear whether there are additional ways in which such stale
commit graphs can lead to problems. In any case, it feels like this is a
bigger bug waiting to happen when we gain additional direct or indirect
callers of `repo_parse_commit_internal()`. So let's fix the inconsistent
behaviour by checking for object existence via the object database, as
well.
This check of course comes with a performance penalty. The following
benchmarks have been executed in a clone of linux.git with stable tags
added:
Benchmark 1: git -c core.commitGraph=true rev-list --topo-order --all (git = master)
Time (mean ± σ): 2.913 s ± 0.018 s [User: 2.363 s, System: 0.548 s]
Range (min … max): 2.894 s … 2.950 s 10 runs
Benchmark 2: git -c core.commitGraph=true rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
Time (mean ± σ): 3.834 s ± 0.052 s [User: 3.276 s, System: 0.556 s]
Range (min … max): 3.780 s … 3.961 s 10 runs
Benchmark 3: git -c core.commitGraph=false rev-list --topo-order --all (git = master)
Time (mean ± σ): 13.841 s ± 0.084 s [User: 13.152 s, System: 0.687 s]
Range (min … max): 13.714 s … 13.995 s 10 runs
Benchmark 4: git -c core.commitGraph=false rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
Time (mean ± σ): 13.762 s ± 0.116 s [User: 13.094 s, System: 0.667 s]
Range (min … max): 13.645 s … 14.038 s 10 runs
Summary
git -c core.commitGraph=true rev-list --topo-order --all (git = master) ran
1.32 ± 0.02 times faster than git -c core.commitGraph=true rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
4.72 ± 0.05 times faster than git -c core.commitGraph=false rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
4.75 ± 0.04 times faster than git -c core.commitGraph=false rev-list --topo-order --all (git = master)
We look at a ~30% regression in general, but in general we're still a
whole lot faster than without the commit graph. To counteract this, the
new check can be turned off with the `GIT_COMMIT_GRAPH_PARANOIA` envvar.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our `lookup_commit_in_graph()` helper tries to look up commits from the
commit graph and, if it doesn't exist there, falls back to parsing it
from the object database instead. This is intended to speed up the
lookup of any such commit that exists in the database. There is an edge
case though where the commit exists in the graph, but not in the object
database. To avoid returning such stale commits the helper function thus
double checks that any such commit parsed from the graph also exists in
the object database. This makes the function safe to use even when
commit graphs aren't updated regularly.
We're about to introduce the same pattern into other parts of our code
base though, namely `repo_parse_commit_internal()`. Here the extra
sanity check is a bit of a tougher sell: `lookup_commit_in_graph()` was
a newly introduced helper, and as such there was no performance hit by
adding this sanity check. If we added `repo_parse_commit_internal()`
with that sanity check right from the beginning as well, this would
probably never have been an issue to begin with. But by retrofitting it
with this sanity check now we do add a performance regression to
preexisting code, and thus there is a desire to avoid this or at least
give an escape hatch.
In practice, there is no inherent reason why either of those functions
should have the sanity check whereas the other one does not: either both
of them are able to detect this issue or none of them should be. This
also means that the default of whether we do the check should likely be
the same for both. To err on the side of caution, we thus rather want to
make `repo_parse_commit_internal()` stricter than to loosen the checks
that we already have in `lookup_commit_in_graph()`.
The escape hatch is added in the form of a new GIT_COMMIT_GRAPH_PARANOIA
environment variable that mirrors GIT_REF_PARANOIA. If enabled, which is
the default, we will double check that commits looked up in the commit
graph via `lookup_commit_in_graph()` also exist in the object database.
This same check will also be added in `repo_parse_commit_internal()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We neither check nor record the size of the generations chunk we parse
from a commit-graph file. This should have one uint32_t for each commit
in the file; if it is smaller (due to corruption, etc), we may read
outside the mapped memory.
The included test segfaults without this patch, as it shrinks the size
considerably (and the chunk is near the end of the file, so we read off
the end of the array rather than accidentally reading another chunk).
We can fix this by checking the size up front (like we do for other
fixed-size chunks, like CDAT).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an entry in a commit-graph file has more than 2 parents, the
fixed-size parent fields instead point to an offset within an "extra
edges" chunk. We blindly follow these, assuming that the chunk is
present and sufficiently large; this can lead to an out-of-bounds read
for a corrupt or malicious file.
We can fix this by recording the size of the chunk and adding a
bounds-check in fill_commit_in_graph(). There are a few tricky bits:
1. We'll switch from working with a pointer to an offset. This makes
some corner cases just fall out naturally:
a. If we did not find an EDGE chunk at all, our size will
correctly be zero (so everything is "out of bounds").
b. Comparing "size / 4" lets us make sure we have at least 4 bytes
to read, and we never compute a pointer more than one element
past the end of the array (computing a larger pointer is
probably OK in practice, but is technically undefined
behavior).
c. The current code casts to "uint32_t *". Replacing it with an
offset avoids any comparison between different types of pointer
(since the chunk is stored as "unsigned char *").
2. This is the first case in which fill_commit_in_graph() may return
anything but success. We need to make sure to roll back the
"parsed" flag (and any parents we might have added before running
out of buffer) so that the caller can cleanly fall back to
loading the commit object itself.
It's a little non-trivial to do this, and we might benefit from
factoring it out. But we can wait on that until we actually see a
second case where we return an error.
As a bonus, this lets us drop the st_mult() call. Since we've already
done a bounds check, we know there won't be any integer overflow (it
would imply our buffer is larger than a size_t can hold).
The included test does not actually segfault before this patch (though
you could construct a case where it does). Instead, it reads garbage
from the next chunk which results in it complaining about a bogus parent
id. This is sufficient for our needs, though (we care that the fallback
succeeds, and that stderr mentions the out-of-bounds read).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We expect a commit-graph file to have a fixed-size data record for each
commit in the file (and we know the number of commits to expct from the
size of the lookup table). If we encounter a file where this is too
small, we'll look past the end of the chunk (and possibly even off the
mapped memory).
We can fix this by checking the size up front when we record the
pointer.
The included test doesn't segfault, since it ends up reading bytes
from another chunk. But it produces nonsense results, since the values
it reads are garbage. Our test notices this by comparing the output to a
non-corrupted run of the same command (and of course we also check that
the expected error is printed to stderr).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use bsearch_hash() to look up items in the oid index of a
commit-graph. It also has a fanout table to reduce the initial range in
which we'll search. But since the fanout comes from the on-disk file, a
corrupted or malicious file can cause us to look outside of the
allocated index memory.
One solution here would be to pass the total table size to
bsearch_hash(), which could then bounds check the values it reads from
the fanout. But there's an inexpensive up-front check we can do, and
it's the same one used by the midx and pack idx code (both of which
likewise have fanout tables and use bsearch_hash(), but are not affected
by this bug):
1. We can check the value of the final fanout entry against the size
of the table we got from the index chunk. These must always match,
since the fanout is just slicing up the index.
As a side note, the midx and pack idx code compute it the other
way around: they use the final fanout value as the object count, and
check the index size against it. Either is valid; if they
disagree we cannot know which is wrong (a corrupted fanout value,
or a too-small table of oids).
2. We can quickly scan the fanout table to make sure it is
monotonically increasing. If it is, then we know that every value
is less than or equal to the final value, and therefore less than
or equal to the table size.
It would also be sufficient to just check that each fanout value is
smaller than the final one, but the midx and pack idx code both do
a full monotonicity check. It's the same cost, and it catches some
other corruptions (though not all; the checks done by "commit-graph
verify" are more complete but more expensive, and our goal here is
to be fast and memory-safe).
There are two new tests. One just checks the final fanout value (this is
the mirror image of the "too small oid lookup" case added for the midx
in the previous commit; it's flipped here because commit-graph considers
the oid lookup chunk to be the source of truth).
The other actually creates a fanout with many out-of-bounds entries, and
prior to this patch, it does cause the segfault you'd expect. But note
that the error is not "your fanout entry is out-of-bounds", but rather
"fanout value out of order". That's because we leave the final fanout
value in place (to get past the table size check), making the index
non-monotonic (the second-to-last entry is big, but the last one must
remain small to match the actual table).
We need adjustments to a few existing tests, as well:
- an earlier test in t5318 corrupts the fanout and runs "commit-graph
verify". Its message is now changed, since we catch the problem
earlier (during the load step, rather than the careful validation
step).
- in t5324, we test that "commit-graph verify --shallow" does not do
expensive verification on the base file of the chain. But the
corruption it uses (munging a byte at offset 1000) happens to be in
the middle of the fanout table. And now we detect that problem in
the cheaper checks that are performed for every part of the graph.
We'll push this back to offset 1500, which is only caught by the
more expensive checksum validation.
Likewise, there's a later test in t5324 which munges an offset 100
bytes into a file (also in the fanout table) that is referenced by
an alternates file. So we now find that corruption during the load
step, rather than the verification step. At the very least we need
to change the error message (like the case above in t5318). But it
is probably good to make sure we handle all parts of the
verification even for alternate graph files. So let's likewise
corrupt byte 1500 and make sure we found the invalid checksum.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We load the oid fanout chunk with pair_chunk(), which means we never see
the size of the chunk. We just assume the on-disk file uses the
appropriate size, and if it's too small we'll access random memory.
It's easy to check this up-front; the fanout always consists of 256
uint32's, since it is a fanout of the first byte of the hash pointing
into the oid index. These parameters can't be changed without
introducing a new chunk type.
This matches the similar check in the midx OIDF chunk (but note that
rather than checking for the error immediately, the graph code just
leaves parts of the struct NULL and checks for required fields later).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When validating that a commit-graph has either all zero, or all non-zero
generation numbers, we emit a warning on both the rising and falling
edge of transitioning between the two.
So if we are unfortunate enough to see a commit-graph which has a
repeating sequence of zero, then non-zero generation numbers, we'll
generate many warnings that contain more or less the same information.
Avoid this by keeping track of a single example for a commit with zero-
and non-zero generation, and emit a single warning at the end of
verification if both are non-NULL.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The second test called "detect incorrect generation number" asserts that
we correctly warn during an fsck when we see a non-zero generation
number after seeing a zero beforehand.
The other transition (going from non-zero to zero) was previously
untested. Test both directions, and rename the existing test to make
clear which direction it is exercising.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 2ee11f7261 (commit-graph: return generation from memory, 2023-03-20),
the `commit_graph_generation()` function stopped returning zeros when
asked to locate the generation number of a given commit.
This was done at the time to prepare for a later change which set
generation values in memory, meaning that we could no longer rely on
`graph_pos` alone to tell us whether or not to trust the generation
number returned by this function.
In 2ee11f7261, it was noted that this change only impacted very old
commit-graphs, which were written with all commits having generation
number 0. Indeed, zero is not a valid generation number, so we should
never expect to see that value outside of the aforementioned case.
The test fallout in 2ee11f7261 indicated that we were no longer able to
fsck a specific old case of commit-graph corruption, where we see a
non-zero generation number after having seen a generation number of 0
earlier.
Introduce a variant of `commit_graph_generation()` which behaves like
that function did prior to 2ee11f7261, known as
`commit_graph_generation_from_graph()`. Then use this function in the
context of `verify_one_commit_graph()`, where we only want to trust the
values from the graph.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid changing the current working directory from outside of a sub-shell
during the tests in t5318.
Each test has mostly straightforward changes, either:
- Removing the top-level `cd "$TRASH_DIRECTORY/full"`, which is
unnecessary after ensuring that other tests don't change their
working directory outside of a sub-shell.
- Changing any Git invocations which want to be in a sub-directory by
either (a) adding a "-C $DIR" argument, or (b) moving the whole test
into a sub-shell.
While we're here, remove any explicit "git config core.commitGraph true"
invocations which were designed to enable use of the commit-graph. These
are unnecessary following 31b1de6a09b (commit-graph: turn on
commit-graph by default, 2019-08-13).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since e0fd51e1d7 (fsck: verify commit-graph, 2018-06-27), `fsck` runs
`git commit-graph verify` to check the integrity of any commit-graph(s).
Originally, the `git commit-graph verify` step would always print to
stdout/stderr, regardless of whether or not `fsck` was invoked with
`--[no-]progress` or not. But in 7371612255 (commit-graph: add
--[no-]progress to write and verify, 2019-08-26), the commit-graph
machinery learned the `--[no-]progress` option, though `fsck` was not
updated to pass this new flag (or not).
This led to seeing output from running `git fsck`, even with
`--no-progress` on repositories that have a commit-graph:
$ git.compile fsck --connectivity-only --no-progress --no-dangling
Verifying commits in commit graph: 100% (4356/4356), done.
Verifying commits in commit graph: 100% (131912/131912), done.
Ensure that `fsck` passes `--[no-]progress` as appropriate when calling
`git commit-graph verify`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit_graph_generation() method used to report a value of
GENERATION_NUMBER_INFINITY if the commit_graph_data_slab had an instance
for the given commit but the graph_pos indicated the commit was not in
the commit-graph file.
However, an upcoming change will introduce the ability to set generation
values in-memory without writing the commit-graph file. Thus, we can no
longer trust 'graph_pos' to indicate whether or not the generation
member can be trusted.
Instead, trust the 'generation' member if the commit has a value in the
slab _and_ the 'generation' member is non-zero. Otherwise, treat it as
GENERATION_NUMBER_INFINITY.
This only makes a difference for a very old case for the commit-graph:
the very first Git release to write commit-graph files wrote zeroes in
the topological level positions. If we are parsing a commit-graph with
all zeroes, those commits will now appear to have
GENERATION_NUMBER_INFINITY (as if they were not parsed from the
commit-graph).
I attempted several variations to work around the need for providing an
uninitialized 'generation' member, but this was the best one I found. It
does require a change to a verification test in t5318 because it reports
a different error than the one about non-zero generation numbers.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the "subcommand" mode to parse-options API and update the
command line parser of Git commands with subcommands.
* sg/parse-options-subcommand: (23 commits)
remote: run "remote rm" argv through parse_options()
maintenance: add parse-options boilerplate for subcommands
pass subcommand "prefix" arguments to parse_options()
builtin/worktree.c: let parse-options parse subcommands
builtin/stash.c: let parse-options parse subcommands
builtin/sparse-checkout.c: let parse-options parse subcommands
builtin/remote.c: let parse-options parse subcommands
builtin/reflog.c: let parse-options parse subcommands
builtin/notes.c: let parse-options parse subcommands
builtin/multi-pack-index.c: let parse-options parse subcommands
builtin/hook.c: let parse-options parse subcommands
builtin/gc.c: let parse-options parse 'git maintenance's subcommands
builtin/commit-graph.c: let parse-options parse subcommands
builtin/bundle.c: let parse-options parse subcommands
parse-options: add support for parsing subcommands
parse-options: drop leading space from '--git-completion-helper' output
parse-options: clarify the limitations of PARSE_OPT_NODASH
parse-options: PARSE_OPT_KEEP_UNKNOWN only applies to --options
api-parse-options.txt: fix description of OPT_CMDMODE
t0040-parse-options: test parse_options() with various 'parse_opt_flags'
...
|
|
'git commit-graph' parses its subcommands with an if-else if
statement. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Note that the functions implementing each subcommand only accept the
'argc' and '**argv' parameters, so add a (unused) '*prefix' parameter
to make them match the type expected by parse-options, and thus avoid
casting function pointers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
* tb/commit-graph-genv2-upgrade-fix:
commit-graph: fix corrupt upgrade from generation v1 to v2
commit-graph: introduce `repo_find_commit_pos_in_graph()`
t5318: demonstrate commit-graph generation v2 corruption
|
|
The previous commit demonstrates a bug where a commit-graph using
generation v2 could enter a state where one of the GDA2 values has its
most-significant bit set (indicating that its value should be read from
the extended offset table in the GDO2 chunk) without having a GDO2 chunk
to read from.
This results in the following error message being displayed to the
caller:
fatal: commit-graph requires overflow generation data but has none
This bug arises in the following scenario:
- We decide to write a commit-graph using generation number v2, and
decide (correctly) that no GDO2 chunk is necessary (e.g., because
all of the commiter date offsets are no larger than 2^31-1).
- The v2 generation numbers are stored in the `->generation` member of
the commit slab holding `struct commit_graph_data`'s.
- Later on, `load_commit_graph_info()` is called, overwriting the
v2 generation data in the aforementioned slab with any existing v1
generation data.
Then, when the commit-graph code goes to write the GDA2 chunk via
`write_graph_chunk_generation_data()`, we use the overwritten generation
v1 data in a place where we expect to use a v2 generation number:
offset = commit_graph_data_at(c)->generation - c->date;
...because `commit_graph_data_at(c)->generation` used to hold the v2
generation data, but it was overwritten to contain the v1 generation
number via `load_commit_graph_info()`.
If the `offset` computation above overflows the v2 generation number
max, then `write_graph_chunk_generation_data()` will update its count of
large offsets and write the marker accordingly:
if (offset > GENERATION_NUMBER_V2_OFFSET_MAX) {
offset = CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW | num_generation_data_overflows;
num_generation_data_overflows++;
}
and reads will look for the GDO2 chunk containing the overflowing v2
generation number, *after* the commit-graph code decided that no such
chunk was necessary.
The main problem is that the slab containing `struct commit_graph_data`
has a dual purpose. It is used to hold data that we are about to write
to disk while generating a commit-graph, as well as hold data that was
read from an existing commit-graph.
When the two mix, namely when the result of reading the commit-graph has
a side-effect that mixes poorly with an in-progress commit-graph write,
we end up with corrupt data.
A complete fix might be to introduce a new slab that is used exclusively
for writing, and gate access between the two slabs based on context
provided by the caller (e.g., whether this computation is part of a
"read" or "write" operation).
But a more minimal fix addresses the only known path which overwrites
the slab data, which is `compute_bloom_filters()` ->
`get_or_compute_bloom_filter()` -> `load_commit_graph_info()` ->
`fill_commit_graph_info()` by avoiding the last call which clobbers the
data altogether.
This path only needs to learn the graph position of a given commit so
that it can be used in `load_bloom_filter_from_graph()`. By replacing
the last steps of the above with one that records the graph position
into a temporary variable which is then used to load the existing Bloom
data, we eliminate the clobbering, removing the corruption.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When upgrading a commit-graph using generation v1 to one using
generation v2, it is possible to force Git into a corrupt state where it
(incorrectly) believes that a GDO2 chunk is necessary, *after* deciding
not to write one.
This makes subsequent reads using the commit-graph produce the following
error message:
fatal: commit-graph requires overflow generation data but has none
Demonstrate this bug by increasing our test coverage to include a
minimal example of upgrading a commit-graph from generation v1 to v2.
The only notable components of this test are:
- The committer date of the commit is chosen carefully so that the
offset underflows when computed using a v1 generation number, but
would not overflow when using v2 generation numbers.
- The upgrade to generation number v2 must read in the v1 generation
numbers, which we can do by passing `--changed-paths`, which will
force the commit-graph internals to call `fill_commit_graph_info()`.
A future patch will squash this bug.
Reported-by: Jeff King <peff@peff.net>
Reproduced-by: Will Chandler <wfc@wfchandler.org>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change those tests that assumed that a .git/info directory would be
created for them when writing .git/info/grafts to explicitly create
the directory.
Do this using the new "TEST_CREATE_REPO_NO_TEMPLATE" facility, and use
"mkdir" instead of "mkdir -p" to assert that we don't have the
.git/info already. An exception to this is the "with grafts" test in
"t6001-rev-list-graft.sh". There we're modifying our ".git" state in a
for-loop, in lieu of refactoring that more extensively let's use
"mkdir -p" there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'read_generation_data' member of 'struct commit_graph' was
introduced by 1fdc383c5 (commit-graph: use generation v2 only if entire
chain does, 2021-01-16). The intention was to avoid using corrected
commit dates if not all layers of a commit-graph had that data stored.
The logic in validate_mixed_generation_chain() at that point incorrectly
initialized read_generation_data to 1 if and only if the tip
commit-graph contained the Corrected Commit Date chunk.
This was "fixed" in 448a39e65 (commit-graph: validate layers for
generation data, 2021-02-02) to validate that read_generation_data was
either non-zero for all layers, or it would set read_generation_data to
zero for all layers.
The problem here is that read_generation_data is not initialized to be
non-zero anywhere!
This change initializes read_generation_data immediately after the chunk
is parsed, so each layer will have its value present as soon as
possible.
The read_generation_data member is used in fill_commit_graph_info() to
determine if we should use the corrected commit date or the topological
levels stored in the Commit Data chunk. Due to this bug, all previous
versions of Git were defaulting to topological levels in all cases!
This can be measured with some performance tests. Using the Linux kernel
as a testbed, I generated a complete commit-graph containing corrected
commit dates and tested the 'new' version against the previous, 'old'
version.
First, rev-list with --topo-order demonstrates a 26% improvement using
corrected commit dates:
hyperfine \
-n "old" "$OLD_GIT rev-list --topo-order -1000 v3.6" \
-n "new" "$NEW_GIT rev-list --topo-order -1000 v3.6" \
--warmup=10
Benchmark 1: old
Time (mean ± σ): 57.1 ms ± 3.1 ms
Range (min … max): 52.9 ms … 62.0 ms 55 runs
Benchmark 2: new
Time (mean ± σ): 45.5 ms ± 3.3 ms
Range (min … max): 39.9 ms … 51.7 ms 59 runs
Summary
'new' ran
1.26 ± 0.11 times faster than 'old'
These performance improvements are due to the algorithmic improvements
given by walking fewer commits due to the higher cutoffs from corrected
commit dates.
However, this comes at a cost. The additional I/O cost of parsing the
corrected commit dates is visible in case of merge-base commands that do
not reduce the overall number of walked commits.
hyperfine \
-n "old" "$OLD_GIT merge-base v4.8 v4.9" \
-n "new" "$NEW_GIT merge-base v4.8 v4.9" \
--warmup=10
Benchmark 1: old
Time (mean ± σ): 110.4 ms ± 6.4 ms
Range (min … max): 96.0 ms … 118.3 ms 25 runs
Benchmark 2: new
Time (mean ± σ): 150.7 ms ± 1.1 ms
Range (min … max): 149.3 ms … 153.4 ms 19 runs
Summary
'old' ran
1.36 ± 0.08 times faster than 'new'
Performance issues like this are what motivated 702110aac (commit-graph:
use config to specify generation type, 2021-02-25).
In the future, we could fix this performance problem by inserting the
corrected commit date offsets into the Commit Date chunk instead of
having that data in an extra chunk.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When computing the generation numbers for a commit-graph, we compute
the corrected commit dates and then check if their offsets from the
actual dates is too large to fit in the 32-bit Generation Data chunk.
However, there is a problem with this approach: if we have parsed the
generation data from the previous commit-graph, then we continue the
loop because the corrected commit date is already computed. This causes
an under-count in the number of overflow values.
It is incorrect to add an increment to num_generation_data_overflows
next to this 'continue' statement, because we might start
double-counting commits that are computed because of the depth-first
search walk from a commit with an earlier OID.
Instead, iterate over the full commit list at the end, checking the
offsets to see how many grow beyond the maximum value.
Create a new t5328-commit-graph-64-bit-time.sh test script to handle
special cases of testing 64-bit timestamps. This helps demonstrate this
bug in more cases. It still won't hit all potential cases until the next
change, which reenables reading generation numbers. Use the skip_all
trick from 0a2bfccb9c8 (t0051: use "skip_all" under !MINGW in
single-test file, 2022-02-04) to make the output clean when run on a
32-bit system.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The graph_git_behavior helper is useful for testing that certain Git
commands behave the same when using the commit-graph and when not using
the commit-graph. Extract it to a new lib-commit-graph.sh file for use
in new test scripts that will split out from t5318.
While doing this extraction, also extract graph_read_expect and the
logic for priming the test_oid_cache.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be helpful to verify that the 'struct commit_graph' that results
from parsing a commit-graph is correctly structured. The existence of
different chunks is not enough to verify that all of the optional
features are correctly enabled.
Update 'test-tool read-graph' to output an "options:" line that includes
information for different parts of the struct commit_graph.
In particular, this change demonstrates that the read_generation_data
option is never being enabled, which will be fixed in a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change fsck to check the "core_commit_graph" variable set in
"repo-settings.c" instead of reading the "core.commitGraph" variable.
This fixes a bug where we wouldn't verify the commit-graph if the
config key was missing. This bug was introduced in
31b1de6a09 (commit-graph: turn on commit-graph by default, 2019-08-13),
where core.commitGraph was turned on by default.
Add tests to "t5318-commit-graph.sh" to verify that fsck checks the
commit-graph as expected for the 3 values of core.commitGraph. Also,
disable GIT_TEST_COMMIT_GRAPH in t/t0410-partial-clone.sh because some
test cases use fsck in ways that assume that commit-graph checking is
disabled.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gc/use-repo-settings
* ab/ignore-replace-while-working-on-commit-graph:
commit-graph: don't consider "replace" objects with "verify"
commit-graph tests: fix another graph_git_two_modes() helper
commit-graph tests: fix error-hiding graph_git_two_modes() helper
|
|
Extend the code added in d6538246d3d (commit-graph: not compatible
with replace objects, 2018-08-20) which ignored replace objects in the
"write" command to ignore it in the "verify" command too.
We can just move this assignment to the cmd_commit_graph(), it
dispatches to "write" and "verify", and we're unlikely to ever get a
sub-command that would like to consider replace refs.
This will make tests added in eddc1f556cd (mktag tests: test
update-ref and reachable fsck, 2021-06-17) pass in combination with
the "GIT_TEST_COMMIT_GRAPH" mode added in 859fdc0c3cf (commit-graph:
define GIT_TEST_COMMIT_GRAPH, 2018-08-29), except that mode is
currently broken (but is being fixed concurrently). See the discussion
starting at [1].
1. https://lore.kernel.org/git/87wnmihswp.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The graph_git_two_modes() helper added in 177722b3442 (commit:
integrate commit graph with commit parsing, 2018-04-10) didn't
&&-chain its "git commit-graph" invocations, which as can be seen with
SANITIZE=leak will happily mark tests as passing if both of these
commands die, since test_cmp() will be comparing two empty files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bring the "commit-graph" command in line with the error output and
general pattern in cmd_multi_pack_index().
Let's test for that output, and also cover the same potential bug as
was fixed in the multi-pack-index command in
88617d11f9d (multi-pack-index: fix potential segfault without
sub-command, 2021-07-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the parse_options() invocation in the commit-graph code to
error on unknown leftover argv elements, in addition to the existing
and implicit erroring via parse_options() on unknown options.
We'd already error in cmd_commit_graph() on e.g.:
git commit-graph unknown verify
git commit-graph --unknown verify
But here we're calling parse_options() twice more for the "write" and
"verify" subcommands. We did not do the same checking for leftover
argv elements there. As a result we'd silently accept garbage in these
subcommands, let's not do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new configuration variable has been introduced to allow choosing
which version of the generation number gets used in the
commit-graph file.
* ds/commit-graph-generation-config:
commit-graph: use config to specify generation type
commit-graph: create local repository pointer
|
|
The common code to deal with "chunked file format" that is shared
by the multi-pack-index and commit-graph files have been factored
out, to help codepaths for both filetypes to become more robust.
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
|
|
We have two established generation number versions:
1: topological levels
2: corrected commit dates
The corrected commit dates are enabled by default, but they also write
extra data in the GDAT and GDOV chunks. Services that host Git data
might want to have more control over when this feature rolls out than
just updating the Git binaries.
Add a new "commitGraph.generationVersion" config option that specifies
the intended generation number version. If this value is less than 2,
then the GDAT chunk is never written _or read_ from an existing file.
This can replace our use of the GIT_TEST_COMMIT_GRAPH_NO_GDAT
environment variable in the test suite. Remove it.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test framework clean-up.
* ab/test-lib:
test-lib-functions: assert correct parameter count
test-lib-functions: remove bug-inducing "diagnostics" helper param
test libs: rename "diff-lib" to "lib-diff"
t/.gitattributes: sort lines
test-lib-functions: move function to lib-bitmap.sh
test libs: rename gitweb-lib.sh to lib-gitweb.sh
test libs: rename bundle helper to "lib-bundle.sh"
test-lib-functions: remove generate_zero_bytes() wrapper
test-lib-functions: move test_set_index_version() to its user
test lib: change "error" to "BUG" as appropriate
test-lib: remove check_var_migration
|
|
Instead of parsing the table of contents directly, use the chunk-format
API methods read_table_of_contents() and pair_chunk(). While the current
implementation loses the duplicate-chunk detection, that will be added
in a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since d5cfd142ec1 (tests: teach the test-tool to generate NUL bytes
and use it, 2019-02-14) the generate_zero_bytes() functions has been a
thin wrapper for "test-tool genzeros". Let's have its only user call
that directly instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before checking if the repository has a commit-graph loaded, be sure
to run prepare_commit_graph(). This is necessary because otherwise
the topo_levels slab is not initialized. As we compute topo_levels for
the new commits, we iterate further into the lower layers since the
first visit to each commit looks as though the topo_level is not
populated.
By properly initializing the topo_slab, we fix the previously broken
case of a split commit graph where a base layer has the
generation_data_overflow chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
