diff options
| author | Russell King (Oracle) <rmk+kernel@armlinux.org.uk> | 2025-04-12 09:08:35 +0100 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2025-04-14 17:12:40 -0700 |
| commit | 17ec6dbaaed3e2447c8aac93c7161823402aa2d9 (patch) | |
| tree | e1fed2bb9d9e74785aac53c51106f2f29906a168 | |
| parent | net: stmmac: dwc-qos: remove tegra_eqos_init() (diff) | |
| download | linux-17ec6dbaaed3e2447c8aac93c7161823402aa2d9.tar.gz linux-17ec6dbaaed3e2447c8aac93c7161823402aa2d9.zip | |
net: stmmac: intel: remove eee_usecs_rate and hardware write
Remove the write to GMAC_1US_TIC_COUNTER for two reasons:
1. during initialisation or reinitialisation of the DWMAC core, the
core is reset, which sets this register back to its default value.
Writing it prior to stmmac_dvr_probe() has no effect.
2. Since commit 8efbdbfa9938 ("net: stmmac: Initialize
MAC_ONEUS_TIC_COUNTER register"), GMAC4/5 core code will set
this register based on the rate of plat->stmmac_clk. This clock
is created by the same code which initialises plat->eee_usecs_rate,
which is also created to run at this same rate. Since Marek's
commit, this will set this register appropriately using the
rate of this clock.
Therefore, dwmac-intel.c writing GMAC_1US_TIC_COUNTER serves no
useful purpose and can be removed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u3Vul-000E7m-1j@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 8 |
1 files changed, 0 insertions, 8 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c index c8bb9265bbb4..54db5b778304 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c @@ -682,7 +682,6 @@ static int intel_mgbe_common_data(struct pci_dev *pdev, plat->axi->axi_blen[2] = 16; plat->ptp_max_adj = plat->clk_ptp_rate; - plat->eee_usecs_rate = plat->clk_ptp_rate; /* Set system clock */ sprintf(clk_name, "%s-%s", "stmmac", pci_name(pdev)); @@ -1313,13 +1312,6 @@ static int intel_eth_pci_probe(struct pci_dev *pdev, memset(&res, 0, sizeof(res)); res.addr = pcim_iomap_table(pdev)[0]; - if (plat->eee_usecs_rate > 0) { - u32 tx_lpi_usec; - - tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1; - writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER); - } - ret = stmmac_config_multi_msi(pdev, plat, &res); if (ret) { ret = stmmac_config_single_msi(pdev, plat, &res); |