arm64: dts: imx8mp pollux: add displays for expansion board

The same displays that can be connected directly to the
imx8mp-phyboard-pollux can also be connected to the expansion board
PEB-AV-10. For displays connected to the expansion board, a second LVDS
channel of the i.MX 8M Plus SoC is used and only a single display
connected to the SoC LVDS display bridge at a given time is supported.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

3 files changed, 96 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index c8194a95681d..75676b908299 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -230,11 +230,17 @@ imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-phyboard-pollux-etml1010g3dra.dtbo
 imx8mp-phyboard-pollux-peb-av-10-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-phyboard-pollux-peb-av-10.dtbo
+imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtbo
+imx8mp-phyboard-pollux-peb-av-10-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtbo
 imx8mp-phyboard-pollux-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-phyboard-pollux-ph128800t006.dtbo
 imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-etml1010g3dra.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-ph128800t006.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-prt8ml.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
new file mode 100644
index 000000000000..aceb5b6056ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm4 0 50000 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel_lvds0 {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
new file mode 100644
index 000000000000..559286f384be
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm4 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 66.5 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 66.5 MHz.
+	 */
+	assigned-clock-rates = <0>, <465500000>;
+	status = "okay";
+};
+
+&panel_lvds0 {
+	compatible = "powertip,ph128800t006-zhc01";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};